NetBSD 8.2 load on BeBox

>> NetBSD/bebox BOOT, Revision 1.10 (Tue Mar 31 05:08:40 UTC 2020)
>> Memory: 237568 k

/dev/disk/scsi/010: <         SCSI2SD>
/dev/disk/scsi/020: <GENERIC         >
/dev/disk/scsi/040: <         SCSI2SD>

Boot: Loading /dev/disk/scsi/000/0_0:/netbsd
/dev/disk/scsi/000/0_0:/netbsd Input/output error
open /dev/disk/scsi/000/0_0:/netbsd: Input/output error

Boot: Loading /dev/disk/ide/0/master/0_0:/netbsd
/dev/disk/ide/0/master/0_0:/netbsd No such file or directory
open /dev/disk/ide/0/master/0_0:/netbsd: No such file or directory

Boot: Loading /dev/disk/floppy:netbsd
       func: F_READ
        st0 = 0x44
        st1 = 0x4
        st2 = 0x10
          c = 0x3
          h = 0x1
          r = 0x3
          n = 0x2
fdc0: unit0 fdReadWrite error [READ]
4268052/
Please remove disk 1, insert disk 2, and press return...
+89188
Please remove disk 2, insert disk 1, and press return...
|
Please remove disk 1, insert disk 2, and press return...
-
Please remove disk 2, insert disk 1, and press return...
\
Please remove disk 1, insert disk 2, and press return...
/
Please remove disk 2, insert disk 1, and press return...
-
Please remove disk 1, insert disk 2, and press return...
=0x427f9c
start=0x100000

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.2 (INSTALL) #0: Tue Mar 31 05:08:40 UTC 2020
        [email protected]:/usr/src/sys/arch/bebox/compile/INSTALL
total memory = 232 MB
avail memory = 220 MB
mainbus0 (root)
cpu0 at mainbus0: 603e (Revision 4.0), ID 0 (primary)
cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
cpu1 at mainbus0: ID 1
cpu1: processor off-line; multiprocessor support not present in kernel
pci0 at mainbus0 bus 0: indirect configuration space access
pchb0 at pci0 dev 0 function 0
pchb0: vendor 1057 product 0001 (rev. 0x24)
pchb0: L2 cache: 256K, multiprocessor mode
pcib0 at pci0 dev 11 function 0: vendor 8086 product 0484 (rev. 0x43)
siop0 at pci0 dev 12 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at irq 26
scsibus0 at siop0: 8 targets, 8 luns per target
vga0 at pci0 dev 13 function 0: vendor 5333 product 88c1 (rev. 0x00)
wsdisplay1 at vga0 (kbdmux ignored)
drm at vga0 not configured
tlp0 at pci0 dev 15 function 0: DECchip 21041 Ethernet, pass 2.1
tlp0: interrupting at irq 29
tlp0: Ethernet address 00:e0:29:0e:47:54
tlp0: 10baseT, 10baseT-FDX
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbdprobe: reset response 0x0
attimer0 at isa0 port 0x40-0x43
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
vmmask 32000000 schedmask 32000000 highmask 7e000000
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <codesrc, SCSI2SD, 6.0> disk removable
sd0: 1440 KB, 80 cyl, 1 head, 18 sec, 512 bytes/sect x 2880 sectors
sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
fd0 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec
sd1 at scsibus0 target 2 lun 0: <netbsd, GENERIC, 6.0> disk removable
sd1: fabricating a geometry
sd1: 5120 KB, 5 cyl, 64 head, 32 sec, 512 bytes/sect x 10240 sectors
sd1: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
cd0 at scsibus0 target 3 lun 0: <TOSHIBA, CD-ROM XM-3701TA, 3055> cdrom removable
cd0: async, 8-bit transfers
sd2 at scsibus0 target 4 lun 0: <codesrc, SCSI2SD, 6.0> disk fixed
sd2: 16384 MB, 2088 cyl, 255 head, 63 sec, 512 bytes/sect x 33554432 sectors
sd2: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
boot device: <unknown>
root on md0a dumps on md0b
kern.module.path=/stand/bebox/8.2/modules
WARNING: clock lost 3595 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!