Advertisement
Bullet64

10.7-1175

Apr 7th, 2020
167
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 56.14 KB | None | 0 0
  1. U-Boot 2020.01-rockchip-ayufan-1074-g41f94eb54f (Apr 05 2020 - 16:54:23 +0000)
  2.  
  3. Model: Pine64 RockPro64
  4. DRAM: 2 GiB
  5. PMIC: RK808
  6. MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
  7. Loading Environment from MMC... Card did not respond to voltage select!
  8. *** Warning - No block device, using default environment
  9.  
  10. In: serial@ff1a0000
  11. Out: serial@ff1a0000
  12. Err: serial@ff1a0000
  13. Model: Pine64 RockPro64
  14. rockchip_dnl_key_pressed: adc_channel_single_shot fail!
  15. Net: eth0: ethernet@fe300000
  16. Hit any key to stop autoboot: 0
  17. Card did not respond to voltage select!
  18. Card did not respond to voltage select!
  19.  
  20. Device 0: unknown device
  21. scanning bus for devices...
  22.  
  23. Device 0: unknown device
  24.  
  25. Device 1: unknown device
  26.  
  27. Device 2: unknown device
  28.  
  29. Device 3: unknown device
  30. starting USB...
  31. Bus usb@fe380000: USB EHCI 1.00
  32. Bus usb@fe3c0000: USB EHCI 1.00
  33. Bus dwc3: Register 2000140 NbrPorts 2
  34. Starting the controller
  35. USB XHCI 1.10
  36. Bus dwc3: Register 2000140 NbrPorts 2
  37. Starting the controller
  38. USB XHCI 1.10
  39. scanning bus usb@fe380000 for devices... 1 USB Device(s) found
  40. scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
  41. scanning bus dwc3 for devices... 1 USB Device(s) found
  42. scanning bus dwc3 for devices... 4 USB Device(s) found
  43. scanning usb for storage devices... 1 Storage Device(s) found
  44.  
  45. Device 0: Vendor: JMicron Rev: 8101 Prod: Generic
  46. Type: Hard Disk
  47. Capacity: 28626.1 MB = 27.9 GB (58626288 x 512)
  48. ... is now current device
  49. Scanning usb 0:3...
  50. Found /extlinux/extlinux.conf
  51. Retrieving file: /extlinux/extlinux.conf
  52. 937 bytes read in 3 ms (304.7 KiB/s)
  53. select kernel
  54. 1: kernel-5.6.0-1130-ayufan-g910019fc94ce
  55. 2: kernel-5.6.0-1130-ayufan-g910019fc94ce-memtest
  56. Enter choice: 1: kernel-5.6.0-1130-ayufan-g910019fc94ce
  57. Retrieving file: /initrd.img-5.6.0-1130-ayufan-g910019fc94ce
  58. 4389121 bytes read in 112 ms (37.4 MiB/s)
  59. Retrieving file: /vmlinuz-5.6.0-1130-ayufan-g910019fc94ce
  60. 22915584 bytes read in 567 ms (38.5 MiB/s)
  61. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
  62. Retrieving file: /dtbs/5.6.0-1130-ayufan-g910019fc94ce/rockchip/rk3399-rockpro6b
  63. 56691 bytes read in 6 ms (9 MiB/s)
  64. ## Flattened Device Tree blob at 01f00000
  65. Booting using the fdt blob at 0x1f00000
  66. Host not halted after 16000 microseconds.
  67. Loading Ramdisk to 7dacf000, end 7defe901 ... OK
  68. Loading Device Tree to 000000007dabe000, end 000000007daced72 ... OK
  69.  
  70. Starting kernel ...
  71.  
  72. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  73. [ 0.000000] Linux version 5.6.0-1130-ayufan-g910019fc94ce (root@runner-f725f0
  74. [ 0.000000] Machine model: Pine64 RockPro64 v2.1
  75. [ 0.000000] efi: Getting EFI parameters from FDT:
  76. [ 0.000000] efi: UEFI not found.
  77. [ 0.000000] cma: Reserved 64 MiB at 0x0000000079800000
  78. [ 0.000000] psci: probing for conduit method from DT.
  79. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  80. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  81. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  82. [ 0.000000] psci: SMC Calling Convention v1.0
  83. [ 0.000000] percpu: Embedded 34 pages/cpu s101272 r8192 d29800 u139264
  84. [ 0.000000] Detected VIPT I-cache on CPU0
  85. [ 0.000000] CPU features: detected: ARM erratum 845719
  86. [ 0.000000] CPU features: detected: GIC system register CPU interface
  87. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  88. [ 0.000000] Kernel command line: rw panic=10 init=/sbin/init coherent_pool=14
  89. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  90. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
  91. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  92. [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
  93. [ 0.000000] Memory: 1887300K/2095104K available (14012K kernel code, 1130K r)
  94. [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0
  95. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  96. [ 0.000000] rcu: Hierarchical RCU implementation.
  97. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  98. [ 0.000000] Tasks RCU enabled.
  99. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
  100. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  101. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  102. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  103. [ 0.000000] GICv3: 256 SPIs implemented
  104. [ 0.000000] GICv3: 0 Extended SPIs implemented
  105. [ 0.000000] GICv3: Distributor has no Range Selector support
  106. [ 0.000000] GICv3: 16 PPIs implemented
  107. [ 0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support
  108. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  109. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  110. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7f080000 (flat,)
  111. [ 0.000000] ITS: using cache flushing for cmd queue
  112. [ 0.000000] GICv3: using LPI property table @0x000000007f040000
  113. [ 0.000000] GIC: using cache flushing for LPI property table
  114. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007f05000
  115. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
  116. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
  117. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  118. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  119. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  120. [ 0.001426] Console: colour dummy device 80x25
  121. [ 0.002029] printk: console [tty0] enabled
  122. [ 0.002087] Calibrating delay loop (skipped), value calculated using timer f)
  123. [ 0.002117] pid_max: default: 32768 minimum: 301
  124. [ 0.002373] LSM: Security Framework initializing
  125. [ 0.002406] Yama: becoming mindful.
  126. [ 0.002522] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
  127. [ 0.002557] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  128. [ 0.002654] *** VALIDATE tmpfs ***
  129. [ 0.003364] *** VALIDATE proc ***
  130. [ 0.003707] *** VALIDATE cgroup ***
  131. [ 0.003727] *** VALIDATE cgroup2 ***
  132. [ 0.005095] rcu: Hierarchical SRCU implementation.
  133. [ 0.007610] Platform MSI: interrupt-controller@fee20000 domain created
  134. [ 0.008042] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  135. [ 0.008793] EFI services will not be available.
  136. [ 0.009456] smp: Bringing up secondary CPUs ...
  137. [ 0.010209] Detected VIPT I-cache on CPU1
  138. [ 0.010248] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  139. [ 0.010264] GICv3: CPU1: using allocated LPI pending table @0x000000007f06000
  140. [ 0.010315] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  141. [ 0.011083] Detected VIPT I-cache on CPU2
  142. [ 0.011112] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  143. [ 0.011125] GICv3: CPU2: using allocated LPI pending table @0x000000007f07000
  144. [ 0.011155] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  145. [ 0.011836] Detected VIPT I-cache on CPU3
  146. [ 0.011863] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  147. [ 0.011876] GICv3: CPU3: using allocated LPI pending table @0x000000007f10000
  148. [ 0.011905] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  149. [ 0.012607] CPU features: detected: EL2 vector hardening
  150. [ 0.012617] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  151. [ 0.012623] CPU features: detected: ARM erratum 1319367
  152. [ 0.012628] Detected PIPT I-cache on CPU4
  153. [ 0.012662] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  154. [ 0.012675] GICv3: CPU4: using allocated LPI pending table @0x000000007f11000
  155. [ 0.012710] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  156. [ 0.013449] Detected PIPT I-cache on CPU5
  157. [ 0.013474] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  158. [ 0.013486] GICv3: CPU5: using allocated LPI pending table @0x000000007f12000
  159. [ 0.013513] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  160. [ 0.013624] smp: Brought up 1 node, 6 CPUs
  161. [ 0.013918] SMP: Total of 6 processors activated.
  162. [ 0.013936] CPU features: detected: 32-bit EL0 Support
  163. [ 0.013953] CPU features: detected: CRC32 instructions
  164. [ 0.047591] CPU: All CPU(s) started at EL2
  165. [ 0.047684] alternatives: patching kernel code
  166. [ 0.050553] devtmpfs: initialized
  167. [ 0.062164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  168. [ 0.062208] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  169. [ 0.065529] pinctrl core: initialized pinctrl subsystem
  170. [ 0.066589] thermal_sys: Registered thermal governor 'fair_share'
  171. [ 0.066594] thermal_sys: Registered thermal governor 'bang_bang'
  172. [ 0.066619] thermal_sys: Registered thermal governor 'step_wise'
  173. [ 0.066635] thermal_sys: Registered thermal governor 'user_space'
  174. [ 0.066652] thermal_sys: Registered thermal governor 'power_allocator'
  175. [ 0.067301] DMI not present or invalid.
  176. [ 0.068169] NET: Registered protocol family 16
  177. [ 0.070884] DMA: preallocated 1024 KiB pool for atomic allocations
  178. [ 0.072158] cpuidle: using governor ladder
  179. [ 0.072190] cpuidle: using governor menu
  180. [ 0.072641] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  181. [ 0.072824] ASID allocator initialised with 65536 entries
  182. [ 0.072972] Serial: AMBA PL011 UART driver
  183. [ 0.109176] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  184. [ 0.109200] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  185. [ 0.109214] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  186. [ 0.109227] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  187. [ 1.545456] cryptd: max_cpu_qlen set to 1000
  188. [ 1.576760] ACPI: Interpreter disabled.
  189. [ 1.578344] vcc3v3_pcie: supplied by vcc12v_dcin
  190. [ 1.579989] vcc5v0_sys: supplied by vcc12v_dcin
  191. [ 1.580362] vcc5v0_usb: supplied by vcc12v_dcin
  192. [ 1.580583] vcc3v3_sys: supplied by vcc5v0_sys
  193. [ 1.581288] iommu: Default domain type: Translated
  194. [ 1.583430] vgaarb: loaded
  195. [ 1.584219] SCSI subsystem initialized
  196. [ 1.584650] usbcore: registered new interface driver usbfs
  197. [ 1.584698] usbcore: registered new interface driver hub
  198. [ 1.584789] usbcore: registered new device driver usb
  199. [ 1.585293] mc: Linux media interface: v0.10
  200. [ 1.585330] videodev: Linux video capture interface: v2.00
  201. [ 1.585394] pps_core: LinuxPPS API ver. 1 registered
  202. [ 1.585405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  203. [ 1.585438] PTP clock support registered
  204. [ 1.585660] EDAC MC: Ver: 3.0.0
  205. [ 1.586389] Advanced Linux Sound Architecture Driver Initialized.
  206. [ 1.586854] NetLabel: Initializing
  207. [ 1.586868] NetLabel: domain hash size = 128
  208. [ 1.586877] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  209. [ 1.586935] NetLabel: unlabeled traffic allowed by default
  210. [ 1.587464] clocksource: Switched to clocksource arch_sys_counter
  211. [ 1.587483] *** VALIDATE bpf ***
  212. [ 1.587703] VFS: Disk quotas dquot_6.6.0
  213. [ 1.587772] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  214. [ 1.587848] *** VALIDATE ramfs ***
  215. [ 1.587870] *** VALIDATE hugetlbfs ***
  216. [ 1.588249] pnp: PnP ACPI: disabled
  217. [ 1.594879] NET: Registered protocol family 2
  218. [ 1.595528] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 163)
  219. [ 1.595587] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  220. [ 1.595775] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, line)
  221. [ 1.596119] TCP: Hash tables configured (established 16384 bind 16384)
  222. [ 1.596256] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  223. [ 1.596334] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  224. [ 1.596581] NET: Registered protocol family 1
  225. [ 1.597170] RPC: Registered named UNIX socket transport module.
  226. [ 1.597186] RPC: Registered udp transport module.
  227. [ 1.597197] RPC: Registered tcp transport module.
  228. [ 1.597207] RPC: Registered tcp NFSv4.1 backchannel transport module.
  229. [ 1.597224] PCI: CLS 0 bytes, default 64
  230. [ 1.597365] Trying to unpack rootfs image as initramfs...
  231. [ 1.864541] Freeing initrd memory: 4284K
  232. [ 1.865690] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  233. [ 1.866053] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  234. [ 1.866506] kvm [1]: IPA Size Limit: 40bits
  235. [ 1.868155] kvm [1]: vgic-v2@fff20000
  236. [ 1.868193] kvm [1]: GIC system register CPU interface enabled
  237. [ 1.868394] kvm [1]: vgic interrupt IRQ10
  238. [ 1.868629] kvm [1]: Hyp mode initialized successfully
  239. [ 2.821403] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  240. [ 2.821455] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  241. [ 2.821481] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  242. [ 2.821506] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  243. [ 2.821531] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  244. [ 2.821556] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  245. [ 2.821580] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  246. [ 2.821605] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  247. [ 2.821630] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  248. [ 2.821655] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  249. [ 2.821679] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  250. [ 2.821704] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  251. [ 2.821729] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  252. [ 2.821754] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  253. [ 2.821779] debugfs: File ':interrupt-controller@fee00000' in directory 'dom!
  254. [ 2.825060] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  255. [ 2.833994] zbud: loaded
  256. [ 2.836957] *** VALIDATE nfs ***
  257. [ 2.837055] *** VALIDATE nfs4 ***
  258. [ 2.837164] NFS: Registering the id_resolver key type
  259. [ 2.837204] Key type id_resolver registered
  260. [ 2.837219] Key type id_legacy registered
  261. [ 2.837249] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  262. [ 2.837304] ntfs: driver 2.1.32 [Flags: R/W].
  263. [ 2.837835] fuse: init (API version 7.31)
  264. [ 2.837967] *** VALIDATE fuseblk ***
  265. [ 2.837988] *** VALIDATE fuse ***
  266. [ 2.838393] SGI XFS with ACLs, security attributes, quota, no debug enabled
  267. [ 2.840592] *** VALIDATE xfs ***
  268. [ 2.877385] NET: Registered protocol family 38
  269. [ 2.877427] Key type asymmetric registered
  270. [ 2.877443] Asymmetric key parser 'x509' registered
  271. [ 2.877569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  272. [ 2.877808] io scheduler mq-deadline registered
  273. [ 2.877828] io scheduler kyber registered
  274. [ 2.878070] io scheduler bfq registered
  275. [ 2.880684] vcc5v0_host: supplied by vcc5v0_usb
  276. [ 2.888024] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie1v8 not fr
  277. [ 2.888098] rockchip-pcie f8000000.pcie: f8000000.pcie supply vpcie0v9 not fr
  278. [ 3.427551] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  279. [ 3.428050] rockchip-pcie: probe of f8000000.pcie failed with error -110
  280. [ 3.429157] IPMI message handler: version 39.2
  281. [ 3.432012] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  282. [ 3.432045] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  283. [ 3.433827] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  284. [ 3.433858] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  285. [ 3.435868] pwm-regulator: supplied by regulator-dummy
  286. [ 3.436134] vcc5v0_typec: supplied by vcc5v0_usb
  287. [ 3.437019] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  288. [ 3.439538] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud =A
  289. [ 3.439748] serial serial0: tty port ttyS0 registered
  290. [ 3.440383] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud =A
  291. [ 3.555674] printk: console [ttyS2] enabled
  292. [ 3.558693] cacheinfo: Unable to detect cache hierarchy for CPU 0
  293. [ 3.562702] spi-nor spi0.0: gd25q128 (16384 Kbytes)
  294. [ 3.584791] libphy: Fixed MDIO Bus: probed
  295. [ 3.590597] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
  296. [ 3.599545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  297. [ 3.600163] ehci-pci: EHCI PCI platform driver
  298. [ 3.600599] ehci-platform: EHCI generic platform driver
  299. [ 3.603332] ehci-platform fe380000.usb: EHCI Host Controller
  300. [ 3.604005] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
  301. [ 3.604814] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
  302. [ 3.627495] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  303. [ 3.628231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b6
  304. [ 3.628970] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
  305. [ 3.629613] usb usb1: Product: EHCI Host Controller
  306. [ 3.630051] usb usb1: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce ehd
  307. [ 3.630722] usb usb1: SerialNumber: fe380000.usb
  308. [ 3.631585] hub 1-0:1.0: USB hub found
  309. [ 3.631957] hub 1-0:1.0: 1 port detected
  310. [ 3.634795] ehci-platform fe3c0000.usb: EHCI Host Controller
  311. [ 3.635456] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
  312. [ 3.636246] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
  313. [ 3.657488] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  314. [ 3.658203] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, b6
  315. [ 3.658939] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
  316. [ 3.659581] usb usb2: Product: EHCI Host Controller
  317. [ 3.660016] usb usb2: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce ehd
  318. [ 3.660688] usb usb2: SerialNumber: fe3c0000.usb
  319. [ 3.661496] hub 2-0:1.0: USB hub found
  320. [ 3.661863] hub 2-0:1.0: 1 port detected
  321. [ 3.662783] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  322. [ 3.663345] ohci-pci: OHCI PCI platform driver
  323. [ 3.663792] ohci-platform: OHCI generic platform driver
  324. [ 3.664453] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  325. [ 3.665205] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
  326. [ 3.665990] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
  327. [ 3.731740] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, b6
  328. [ 3.732476] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  329. [ 3.733118] usb usb3: Product: Generic Platform OHCI controller
  330. [ 3.733645] usb usb3: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce ohd
  331. [ 3.734316] usb usb3: SerialNumber: fe3a0000.usb
  332. [ 3.735169] hub 3-0:1.0: USB hub found
  333. [ 3.735535] hub 3-0:1.0: 1 port detected
  334. [ 3.736324] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  335. [ 3.737085] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
  336. [ 3.738454] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
  337. [ 3.811867] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, b6
  338. [ 3.812624] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  339. [ 3.813274] usb usb4: Product: Generic Platform OHCI controller
  340. [ 3.813808] usb usb4: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce ohd
  341. [ 3.814486] usb usb4: SerialNumber: fe3e0000.usb
  342. [ 3.815509] hub 4-0:1.0: USB hub found
  343. [ 3.815897] hub 4-0:1.0: 1 port detected
  344. [ 3.817048] uhci_hcd: USB Universal Host Controller Interface driver
  345. [ 3.818741] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  346. [ 3.819439] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
  347. [ 3.820293] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
  348. [ 3.821160] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe800000
  349. [ 3.822061] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, b6
  350. [ 3.822806] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
  351. [ 3.823455] usb usb5: Product: xHCI Host Controller
  352. [ 3.823897] usb usb5: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce xhd
  353. [ 3.824576] usb usb5: SerialNumber: xhci-hcd.0.auto
  354. [ 3.825571] hub 5-0:1.0: USB hub found
  355. [ 3.825951] hub 5-0:1.0: 1 port detected
  356. [ 3.826710] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  357. [ 3.827380] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
  358. [ 3.828105] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  359. [ 3.828776] usb usb6: We don't know the algorithms for LPM for this host, di.
  360. [ 3.829644] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, b6
  361. [ 3.830388] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
  362. [ 3.831036] usb usb6: Product: xHCI Host Controller
  363. [ 3.831477] usb usb6: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce xhd
  364. [ 3.832156] usb usb6: SerialNumber: xhci-hcd.0.auto
  365. [ 3.833124] hub 6-0:1.0: USB hub found
  366. [ 3.833501] hub 6-0:1.0: 1 port detected
  367. [ 3.834458] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  368. [ 3.835165] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
  369. [ 3.836017] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
  370. [ 3.836914] xhci-hcd xhci-hcd.1.auto: irq 229, io mem 0xfe900000
  371. [ 3.837838] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, b6
  372. [ 3.838582] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber1
  373. [ 3.839232] usb usb7: Product: xHCI Host Controller
  374. [ 3.839674] usb usb7: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce xhd
  375. [ 3.840352] usb usb7: SerialNumber: xhci-hcd.1.auto
  376. [ 3.841331] hub 7-0:1.0: USB hub found
  377. [ 3.841710] hub 7-0:1.0: 1 port detected
  378. [ 3.842451] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  379. [ 3.843131] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
  380. [ 3.843844] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  381. [ 3.844532] usb usb8: We don't know the algorithms for LPM for this host, di.
  382. [ 3.845413] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, b6
  383. [ 3.846156] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber1
  384. [ 3.846805] usb usb8: Product: xHCI Host Controller
  385. [ 3.847248] usb usb8: Manufacturer: Linux 5.6.0-1130-ayufan-g910019fc94ce xhd
  386. [ 3.847949] usb usb8: SerialNumber: xhci-hcd.1.auto
  387. [ 3.848938] hub 8-0:1.0: USB hub found
  388. [ 3.849315] hub 8-0:1.0: 1 port detected
  389. [ 3.850243] usbcore: registered new interface driver uas
  390. [ 3.850937] usbcore: registered new interface driver usb-storage
  391. [ 3.851522] usbcore: registered new interface driver ums-alauda
  392. [ 3.852098] usbcore: registered new interface driver ums-cypress
  393. [ 3.852683] usbcore: registered new interface driver ums-datafab
  394. [ 3.853271] usbcore: registered new interface driver ums_eneub6250
  395. [ 3.853868] usbcore: registered new interface driver ums-freecom
  396. [ 3.854453] usbcore: registered new interface driver ums-isd200
  397. [ 3.855026] usbcore: registered new interface driver ums-jumpshot
  398. [ 3.855616] usbcore: registered new interface driver ums-karma
  399. [ 3.856182] usbcore: registered new interface driver ums-onetouch
  400. [ 3.856786] usbcore: registered new interface driver ums-realtek
  401. [ 3.857371] usbcore: registered new interface driver ums-sddr09
  402. [ 3.858020] usbcore: registered new interface driver ums-sddr55
  403. [ 3.858605] usbcore: registered new interface driver ums-usbat
  404. [ 3.859215] usbcore: registered new interface driver usbserial_generic
  405. [ 3.859809] usbserial: USB Serial support registered for generic
  406. [ 3.862508] mousedev: PS/2 mouse device common for all mice
  407. [ 3.864329] i2c i2c-1: of_i2c: modalias failure on /i2c@ff110000/i2s0
  408. [ 3.864910] i2c i2c-1: Failed to create I2C device for /i2c@ff110000/i2s0
  409. [ 3.866934] rk808 0-001b: chip id: 0x0
  410. [ 3.871419] rk808-regulator rk808-regulator: there is no dvs0 gpio
  411. [ 3.871993] rk808-regulator rk808-regulator: there is no dvs1 gpio
  412. [ 3.872603] DCDC_REG1: supplied by vcc5v0_sys
  413. [ 3.873813] DCDC_REG2: supplied by vcc5v0_sys
  414. [ 3.874700] DCDC_REG3: supplied by vcc5v0_sys
  415. [ 3.875324] DCDC_REG4: supplied by vcc5v0_sys
  416. [ 3.876227] LDO_REG1: supplied by vcc5v0_sys
  417. [ 3.877791] LDO_REG2: supplied by vcc5v0_sys
  418. [ 3.879093] LDO_REG3: supplied by vcc5v0_sys
  419. [ 3.880524] LDO_REG4: supplied by vcc5v0_sys
  420. [ 3.881945] LDO_REG5: supplied by vcc5v0_sys
  421. [ 3.883255] LDO_REG6: supplied by vcc5v0_sys
  422. [ 3.884676] LDO_REG7: supplied by vcc5v0_sys
  423. [ 3.885960] LDO_REG8: supplied by vcc5v0_sys
  424. [ 3.887407] SWITCH_REG1: supplied by vcc3v3_sys
  425. [ 3.888090] SWITCH_REG2: supplied by vcc3v3_sys
  426. [ 3.892045] rk808-rtc rk808-rtc: registered as rtc0
  427. [ 3.893149] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  428. [ 3.893780] fan53555-reg: supplied by vcc5v0_sys
  429. [ 3.895480] vcc1v8_s3: supplied by vcc_1v8
  430. [ 3.896569] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  431. [ 3.897195] fan53555-reg: supplied by vcc5v0_sys
  432. [ 3.898592] random: fast init done
  433. [ 3.900473] typec_fusb302 4-0022: No cable types defined, using default cabls
  434. [ 3.901203] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
  435. [ 3.915786] device-mapper: uevent: version 1.0.3
  436. [ 3.916508] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-m
  437. [ 3.918625] energy_model: pd0: hertz/watts ratio non-monotonically decreasin0
  438. [ 3.923863] sdhci: Secure Digital Host Controller Interface driver
  439. [ 3.924410] sdhci: Copyright(c) Pierre Ossman
  440. [ 3.925100] Synopsys Designware Multimedia Card Interface Driver
  441. [ 3.926181] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
  442. [ 3.926810] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
  443. [ 3.927396] dwmmc_rockchip fe310000.mmc: Version ID is 270a
  444. [ 3.927925] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit o
  445. [ 3.928851] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
  446. [ 3.929356] mmc_host mmc0: card is non-removable.
  447. [ 3.942698] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  448. [ 3.956551] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
  449. [ 3.957197] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
  450. [ 3.957800] dwmmc_rockchip fe320000.mmc: Version ID is 270a
  451. [ 3.958355] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit o
  452. [ 3.959288] dwmmc_rockchip fe320000.mmc: Got CD GPIO
  453. [ 3.972483] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  454. [ 3.986636] sdhci-pltfm: SDHCI platform and OF driver helper
  455. [ 3.988010] mmc2: CQHCI version 5.10
  456. [ 3.989266] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  457. [ 3.991279] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  458. [ 3.993288] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  459. [ 3.996629] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  460. [ 4.013865] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
  461. [ 4.016340] ledtrig-cpu: registered to indicate activity on CPUs
  462. [ 4.017115] hid: raw HID events driver (C) Jiri Kosina
  463. [ 4.017711] usbcore: registered new interface driver usbhid
  464. [ 4.018202] usbhid: USB HID core driver
  465. [ 4.018683] hantro-vpu ff650000.video-codec: Adding to iommu group 0
  466. [ 4.019651] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-0
  467. [ 4.020474] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-1
  468. [ 4.024920] Initializing XFRM netlink socket
  469. [ 4.026184] NET: Registered protocol family 10
  470. [ 4.052886] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000)
  471. [ 4.070640] Segment Routing with IPv6
  472. [ 4.071054] mip6: Mobile IPv6
  473. [ 4.071324] NET: Registered protocol family 17
  474. [ 4.071935] Key type dns_resolver registered
  475. [ 4.072907] registered taskstats version 1
  476. [ 4.073381] zswap: loaded using pool lzo/zbud
  477. [ 4.074165] Key type ._fscrypt registered
  478. [ 4.074525] Key type .fscrypt registered
  479. [ 4.074874] Key type fscrypt-provisioning registered
  480. [ 4.075397] Key type big_key registered
  481. [ 4.095942] Key type encrypted registered
  482. [ 4.120511] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:24)
  483. [ 4.121277] of_cfs_init
  484. [ 4.121605] of_cfs_init: OK
  485. [ 4.122509] ALSA device list:
  486. [ 4.122783] No soundcards found.
  487. [ 4.123333] ttyS2 - failed to request DMA
  488. [ 4.124379] Freeing unused kernel memory: 1216K
  489. [ 4.207665] Run /init as init process
  490. [ 4.208002] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 163
  491. [ 4.214129] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  492. Loading, please wait...
  493. [ 4.227510] usb 7-1: new high-speed USB device number 2 using xhci-hcd
  494. Starting version 241
  495. [ 4.261056] usb 7-1: New USB device found, idVendor=2101, idProduct=8500, bc6
  496. [ 4.261798] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  497. [ 4.262428] usb 7-1: Product: USB2.0 Hub
  498. [ 4.262780] usb 7-1: Manufacturer: Action Star
  499. [ 4.325266] hub 7-1:1.0: USB hub found
  500. [ 4.326038] hub 7-1:1.0: 5 ports detected
  501. Begin: Loading essential drivers ... done.
  502. Begin: Running /scripts/init-premount ... done.
  503. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  504. Begin: Running /scripts/local-premount ... done.
  505. Begin: Waiting for root file system ... [ 4.717533] usb 7-1.1: new high-speed
  506. [ 4.751156] usb 7-1.1: New USB device found, idVendor=2101, idProduct=8501, 5
  507. [ 4.751924] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumbe0
  508. [ 4.752593] usb 7-1.1: Product: USB HID
  509. [ 4.752952] usb 7-1.1: Manufacturer: Action Star
  510. [ 4.808106] hid-generic 0003:2101:8501.0001: hiddev96,hidraw0: USB HID v1.110
  511. [ 4.907532] usb 7-1.4: new high-speed USB device number 4 using xhci-hcd
  512. [ 4.978433] usb 7-1.4: New USB device found, idVendor=152d, idProduct=0578, 0
  513. [ 4.979189] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumbe3
  514. [ 4.979847] usb 7-1.4: Product: USB to ATA/ATAPI Bridge
  515. [ 4.980319] usb 7-1.4: Manufacturer: JMicron
  516. [ 4.980708] usb 7-1.4: SerialNumber: 0123456789ABCDEF
  517. [ 4.984828] scsi host0: uas
  518. [ 4.987998] scsi 0:0:0:0: Direct-Access JMicron Generic 8101 P6
  519. [ 4.991264] sd 0:0:0:0: Attached scsi generic sg0 type 0
  520. [ 4.992486] sd 0:0:0:0: [sda] 58626288 512-byte logical blocks: (30.0 GB/28.)
  521. [ 4.993180] sd 0:0:0:0: [sda] 4096-byte physical blocks
  522. [ 4.993866] sd 0:0:0:0: [sda] Write Protect is off
  523. [ 4.994696] sd 0:0:0:0: [sda] Disabling FUA
  524. [ 4.995082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
  525. [ 4.996240] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a mul)
  526. [ 5.056110] GPT:Primary header thinks Alt. header is not at the end of the d.
  527. [ 5.056794] GPT:4188159 != 58626287
  528. [ 5.057111] GPT:Alternate GPT header not at the end of the disk.
  529. [ 5.057675] GPT:4188159 != 58626287
  530. [ 5.057993] GPT: Use GNU Parted to correct GPT errors.
  531. [ 5.058495] sda: sda1 sda2 sda3 sda4
  532. [ 5.062841] sd 0:0:0:0: [sda] Attached SCSI disk
  533. Begin: Running /scripts/local-block ... done.
  534. done.
  535. Warning: fsck not present, so skipping root file system
  536. [ 5.649622] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opt)
  537. done.
  538. Begin: Running /scripts/local-bottom ... done.
  539. Begin: Running /scripts/init-bottom ... done.
  540. [ 6.115701] systemd[1]: System time before build time, advancing clock.
  541. [ 6.137283] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SE)
  542. [ 6.139779] systemd[1]: Detected architecture arm64.
  543.  
  544. Welcome to Debian GNU/Linux 10 (buster)!
  545.  
  546. [ 6.207015] systemd[1]: Set hostname to <rockpro64>.
  547. [ 6.209305] random: systemd: uninitialized urandom read (16 bytes read)
  548. [ 6.209961] systemd[1]: Initializing machine ID from random generator.
  549. [ 6.590317] random: systemd: uninitialized urandom read (16 bytes read)
  550. [ 6.595186] random: systemd: uninitialized urandom read (16 bytes read)
  551. [ 6.595844] systemd[1]: Reached target System Time Synchronized.
  552. [ OK ] Reached target System Time Synchronized.
  553. [ 6.618200] systemd[1]: Listening on fsck to fsckd communication Socket.
  554. [ OK ] Listening on fsck to fsckd communication Socket.
  555. [ 6.619905] systemd[1]: Listening on initctl Compatibility Named Pipe.
  556. [ OK ] Listening on initctl Compatibility Named Pipe.
  557. [ 6.648149] systemd[1]: Listening on udev Kernel Socket.
  558. [ OK ] Listening on udev Kernel Socket.
  559. [ 6.678118] systemd[1]: Started Forward Password Requests to Wall Directory .
  560. [ OK ] Started Forward Password R�…uests to Wall Directory Watch.
  561. [ 6.708563] systemd[1]: Listening on Journal Socket.
  562. [ OK ] Listening on Journal Socket.
  563. Starting Set the console keyboard layout...
  564. Starting Remount Root and Kernel File Systems...
  565. [ OK ] Reached target Swap.
  566. [ 6.819038] EXT4-fs (sda4): re-mounted. Opts: (null)
  567. Starting Restore / save the current clock...
  568. Mounting POSIX Message Queue File System...
  569. [ OK ] Listening on Syslog Socket.
  570. [ OK ] Created slice system-serial\x2dgetty.slice.
  571. Mounting Huge Pages File System...
  572. [ OK ] Listening on Journal Socket (/dev/log).
  573. Starting Journal Service...
  574. [ OK ] Created slice system-getty.slice.
  575. [ OK ] Started Dispatch Password �…ts to Console Directory Watch.
  576. [ OK ] Reached target Local Encrypted Volumes.
  577. [ OK ] Reached target Paths.
  578. [ OK ] Created slice User and Session Slice.
  579. [ OK ] Reached target Slices.
  580. [ OK ] Created slice system-systemd\x2dfsck.slice.
  581. [ OK ] Set up automount Arbitrary�…s File System Automount Point.
  582. Starting Load Kernel Modules...
  583. [ OK ] Reached target Remote File Systems.
  584. Starting Nameserver information manager...
  585. Mounting Kernel Debug File System...
  586. [ OK ] Listening on udev Control Socket.
  587. Starting udev Coldplug all Devices...
  588. [ OK ] Started Journal Service.
  589. [ OK ] Started Set the console keyboard layout.
  590. [ OK ] Started Remount Root and Kernel File Systems.
  591. [ OK ] Started Restore / save the current clock.
  592. [ OK ] Mounted POSIX Message Queue File System.
  593. [ OK ] Mounted Huge Pages File System.
  594. [ OK ] Started Load Kernel Modules.
  595. [ OK ] Mounted Kernel Debug File System.
  596. [ OK ] Started Nameserver information manager.
  597. Mounting Kernel Configuration File System...
  598. Starting Apply Kernel Variables...
  599. Mounting FUSE Control File System...
  600. Starting Create System Users...
  601. Starting Load/Save Random Seed...
  602. Starting Rebuild Hardware Database...
  603. Starting Flush Journal to Persistent Storage...
  604. [ OK ] Started udev Coldplug all Devices.
  605. [ OK ] Mounted Kernel Configuration File System.
  606. [ OK ] Started Apply Kernel Variables.
  607. [ OK ] Mounted FUSE Control File System.
  608. [ OK ] Started Create System Users.
  609. [ OK ] Started Load/Save Random Seed.
  610. Starting Create Static Device Nodes in /dev...
  611. Starting Helper to synchronize boot up for ifupdown...
  612. [ OK ] Started Create Static Device Nodes in /dev.
  613. [ OK ] Started Helper to synchronize boot up for ifupdown.
  614. [ 8.279150] systemd-journald[499]: Received request to flush runtime journal1
  615. [ OK ] Reached target Local File Systems (Pre).
  616. [ OK ] Started Flush Journal to Persistent Storage.
  617. [ OK ] Started Rebuild Hardware Database.
  618. Starting udev Kernel Device Manager...
  619. [ OK ] Started udev Kernel Device Manager.
  620. [ OK ] Found device /dev/ttyS2.
  621. [ OK ] Found device Generic boot-efi.
  622. [ OK ] Found device Generic linux-boot.
  623. Starting File System Check�…ev/disk/by-label/linux-boot...
  624. Starting File System Check�…/dev/disk/by-label/boot-efi...
  625. [ OK ] Started File System Check Daemon to report status.
  626. [ OK ] Started File System Check �…/dev/disk/by-label/linux-boot.
  627. [ OK ] Started File System Check on /dev/disk/by-label/boot-efi.
  628. Mounting /boot...
  629. [ 9.648465] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:)
  630. [ 9.649194] ext4 filesystem being mounted at /boot supports timestamps until)
  631. [ OK ] Mounted /boot.
  632. Mounting /boot/efi...
  633. [ OK ] Mounted /boot/efi.
  634. [ OK ] Reached target Local File Systems.
  635. Starting Raise network interfaces...
  636. Starting Set console font and keymap...
  637. [ 9.835632] random: crng init done
  638. [ 9.835959] random: 7 urandom warning(s) missed due to ratelimiting
  639. Starting Create Volatile Files and Directories...
  640. [ OK ] Started Set console font and keymap.
  641. [ OK ] Started Create Volatile Files and Directories.
  642. Starting Update UTMP about System Boot/Shutdown...
  643. [ OK ] Started Raise network interfaces.
  644. [ OK ] Started Update UTMP about System Boot/Shutdown.
  645. [ OK ] Reached target System Initialization.
  646. [ OK ] Listening on D-Bus System Message Bus Socket.
  647. [ OK ] Started Daily Cleanup of Temporary Directories.
  648. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  649. [ OK ] Reached target Sockets.
  650. [ OK ] Started Daily apt download activities.
  651. [ OK ] Started Daily apt upgrade and clean activities.
  652. [ OK ] Started Daily rotation of log files.
  653. [ OK ] Reached target Timers.
  654. [ OK ] Reached target Basic System.
  655. Starting System Logging Service...
  656. [ OK ] Started D-Bus System Message Bus.
  657. Starting Network Manager...
  658. Starting Generate SSH keys if not there...
  659. Starting Rock 64 First boot...
  660. Starting Start bluetooth on ttyS0...
  661. Starting Login Service...
  662. Starting WPA supplicant...
  663. Starting DHCP Client Daemon...
  664. Starting Resets System Activity Data Collector...
  665. [ OK ] Started Regular background program processing daemon.
  666. Starting Avahi mDNS/DNS-SD Stack...
  667. [ OK ] Started System Logging Service.
  668. [ OK ] Started DHCP Client Daemon.
  669. [ OK ] Started Resets System Activity Data Collector.
  670. [ OK ] Started Login Service.
  671. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  672. [ OK ] Started WPA supplicant.
  673. [ 10.817770] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGR
  674. [ 11.027650] rd 0-5: Disabling EAS, schedutil is mandatory
  675. [ OK ] Started Generate SSH keys if not there.
  676. [ OK ] Started Network Manager.
  677. Starting Hostname Service...
  678. [ OK ] Reached target Network.
  679. Starting Network Time Service...
  680. Starting OpenBSD Secure Shell server...
  681. Starting Permit User Sessions...
  682. [ OK ] Started Network Time Service.
  683. [ OK ] Started Permit User Sessions.
  684. [ OK ] Started Hostname Service.
  685. [ OK ] Started OpenBSD Secure Shell server.
  686. Starting Network Manager Script Dispatcher Service...
  687. [ OK ] Started Getty on tty1.
  688. [ OK ] Started Serial Getty on ttyS2.
  689. [ OK ] Reached target Login Prompts.
  690. [ OK ] Started Network Manager Script Dispatcher Service.
  691. Starting Authorization Manager...
  692. [ OK ] Started Authorization Manager.
  693. [ 12.428262] EXT4-fs (sda4): resizing filesystem from 490496 to 7295513 blocks
  694. [FAILED] Failed to start Start bluetooth on ttyS0.
  695. See 'systemctl status sdio-hciattach.service' for details.
  696. [ 12.745276] EXT4-fs (sda4): resized filesystem to 7295513
  697. [ OK ] Started Rock 64 First boot.
  698. [ OK ] Reached target Multi-User System.
  699. [ OK ] Reached target Graphical Interface.
  700. Starting Update UTMP about System Runlevel Changes...
  701. [ OK ] Started Update UTMP about System Runlevel Changes.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement