API tools faq
paste
Advertisement
Guest User

miata engine,gearbox,exhaust, driveshaft

a guest
Mar 2nd, 2019
260
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.35 KB | None | 0 0
raw download clone embed print report
  1. 019-03-03 02:19:08] [Output] : ★ William Baumgartner goes to the crate that contains the LS3 engine and takes off all the walls of the crate -
  2. [2019-03-03 02:19:12] [Output] : ★ revealing the engine ((William Baumgartner))
  3. [2019-03-03 02:22:42] [Output] : ★ William Baumgartner then goes to the crate that holds the gearbox and all the neccessary tools and items for it
  4. [2019-03-03 02:22:52] [Output] : ★ William Baumgartner takes the walls off that crate as well
  5. [2019-03-03 02:23:48] [Output] : ★ William Baumgartner grabs the flywheel from the crate and places it onto the rear of the engine
  6. [2019-03-03 02:26:17] [Output] : * William Baumgartner reaches for his radio attached to his pants, clicks a button and speaks into it *
  7. [2019-03-03 02:27:17] [Output] : ★ William Baumgartner then grabs a small bottle of loctite and the bolts needed for mounting the flywheel
  8. [2019-03-03 02:27:34] [Output] : ★ William Baumgartner greases every bolt up with loctite and then slides it into the mounting hole.
  9. [2019-03-03 02:28:31] [Output] : ★ William Baumgartner then hand tightens the bolts until the threads end up
  10. [2019-03-03 02:28:59] [Output] : ★ William Baumgartner grabs his torque wrench and reads up the torque figure from the transmission manual
  11. [2019-03-03 02:29:21] [Output] : ★ William Baumgartner sets the torque figure on the wrench and then proceeds to go over the bolts on the flywheel
  12. [2019-03-03 02:29:57] [Output] : ★ William Baumgartner starts torqueing up hte bolts with the first torque value, then increases the value -
  13. [2019-03-03 02:30:07] [Output] : ★ a little, going for a second pass on the bolts ((William Baumgartner))
  14. [2019-03-03 02:30:31] [Output] : ★ The bolts would be torqued to spec and the flywheel would be in place ((William Baumgartner))
  15. [2019-03-03 02:32:31] [Output] : ★ William Baumgartner now grabs the cluctch and the alignment tool
  16. [2019-03-03 02:32:49] [Output] : ★ William Baumgartner places the clutch agains the flywheel with the correct side facing the flywheel and -
  17. [2019-03-03 02:33:06] [Output] : ★ inserts the alignment tool into the central bearing hole through the clutch and flywheel ((William Baumgartner))
  18. [2019-03-03 02:33:48] [Output] : ★ William Baumgartner now goes back to the transmission crate and grabs the pressure plate with the hardware
  19. [2019-03-03 02:34:13] [Output] : ★ William Baumgartner places the pressure plate over the clutch and onto the flywheel, aligning it with the holes
  20. [2019-03-03 02:35:20] [Output] : ★ William Baumgartner then proceeds to place the plate down quickly and apply loctite to the first bolt
  21. [2019-03-03 02:35:38] [Output] : ★ William Baumgartner aligns the pressure plate back into it's position and threads the first bolt through -
  22. [2019-03-03 02:35:42] [Output] : ★ the mounting hole ((William Baumgartner))
  23. [2019-03-03 02:36:08] [Output] : ★ William Baumgartner then keeps adding all the bolts into the mounting holes, greasing up all the bolts with -
  24. [2019-03-03 02:36:12] [Output] : ★ loctite beforehand ((William Baumgartner))
  25. [2019-03-03 02:36:32] [Output] : ★ William Baumgartner then reads up the torque specs for the different passes and then adjusts the torque -
  26. [2019-03-03 02:36:42] [Output] : ★ wrench to the force of the first pass ((William Baumgartner))
  27. [2019-03-03 02:37:05] [Output] : ★ William Baumgartner now begins the first pass, torqueing all the bolts to the spec
  28. [2019-03-03 02:37:28] [Output] : ★ William Baumgartner then increases the torque on the wrench and goes in for the second pass, torqueing the -
  29. [2019-03-03 02:37:38] [Output] : ★ bolts to spec in a star pattern. ((William Baumgartner))
  30. [2019-03-03 02:38:44] [Output] : ★ William Baumgartner now walks to the crate containing the transmission itself
  31. [2019-03-03 02:38:56] [Output] : ★ William Baumgartner firmly grabs the transmission and lifts it up, carrying it to the engine
  32. [2019-03-03 02:39:16] [Output] : ★ William Baumgartner places the transmission down
  33. [2019-03-03 02:39:31] [Output] : ★ William Baumgartner removes the clutch alignment tool from the clutch/flywheel assembly
  34. [2019-03-03 02:40:00] [Output] : ★ William Baumgartner then grabs the bell housing of the transmission and lifts it so it aligns with the mounting-
  35. [2019-03-03 02:40:06] [Output] : ★ points on the engine itself. ((William Baumgartner))
  36. [2019-03-03 02:40:43] [Output] : ★ William Baumgartner pulls the transmission away from the engine just a little
  37. [2019-03-03 02:41:00] [Output] : ★ William Baumgartner grabs his engine hoist from the edge of the garage and drives it towards the engine
  38. [2019-03-03 02:41:21] [Output] : ★ William Baumgartner attaches the chains to the hangers on the engine and then starts pumping up the engine
  39. [2019-03-03 02:41:59] [Output] : ★ William Baumgartner goes under the engine and starts inspecting the bolts that hold the oilpan in place.
  40. [2019-03-03 02:42:22] [Output] : ★ William Baumgartner grabs his socket wrench and starts undoing all the hardware around the oilpan evenly -
  41. [2019-03-03 02:42:31] [Output] : ★ while supporting the oil pan with his free hand ((William Baumgartner))
  42. [2019-03-03 02:43:41] [Output] : ★ William Baumgartner removes the oil pan from the underside of the engine and sets it aside.
  43. [2019-03-03 02:44:03] [Output] : ★ William Baumgartner goes towards the box on the ground that contains the new oil pan for the engine and takes
  44. [2019-03-03 02:45:02] [Output] : ★ out the new oil pan and the gasket for the oil pan ((William Baumgartner))
  45. [2019-03-03 02:45:29] [Output] : ★ William Baumgartner takes the two parts to the engine and then carefully aligns the gasket with the -
  46. [2019-03-03 02:45:32] [Output] : ★ oil pan itself ((William Baumgartner))
  47. [2019-03-03 02:45:57] [Output] : ★ William Baumgartner starts lifting up the oil pan very carefully towards the engine, making sure the gasket -
  48. [2019-03-03 02:46:01] [Output] : ★ doesn't move from its place. ((William Baumgartner))
  49. [2019-03-03 02:46:23] [Output] : ★ William Baumgartner holds the oil pan in place and checks around the engine to make sure that the gasket hasn't
  50. [2019-03-03 02:46:25] [Output] : ★ moved. ((William Baumgartner))
  51. [2019-03-03 02:46:52] [Output] : ★ William Baumgartner now starts placing the bolts inside the mounting holes all around the oil pan, hand -
  52. [2019-03-03 02:46:58] [Output] : ★ tightening them in the proccess ((William Baumgartner))
  53. [2019-03-03 02:47:46] [Output] : ★ William Baumgartner then grabs his torque wrench yet again and looks up the oil pan torque specs from the -
  54. [2019-03-03 02:47:51] [Output] : ★ manual of the new oil pan kit ((William Baumgartner))
  55. [2019-03-03 02:49:26] [Output] : ★ William Baumgartner adjust the torque on the wrench to spec and then starts tightening hte bolts on the -
  56. [2019-03-03 02:49:36] [Output] : ★ oil pan very evenly accross the oil pan, in a star pattern ((William Baumgartner))
  57. [2019-03-03 02:51:38] [Output] : ★ William Baumgartner torques the hardware to spec and then goes to the engine hoist, lowering the engine -
  58. [2019-03-03 02:51:40] [Output] : ★ just a bit ((William Baumgartner))
  59. [2019-03-03 02:52:25] [Output] : ★ William Baumgartner now goes back to the transmission and lifts it to align with the mounting holes on the engin
  60. [2019-03-03 02:52:48] [Output] : ★ William Baumgartner quickly places in some of the hardware into the mounting holes and then releases the -
  61. [2019-03-03 02:52:50] [Output] : ★ tranny ((William Baumgartner))
  62. [2019-03-03 02:53:02] [Output] : ★ William Baumgartner continiues to add the hardware into the other holes as well
  63. [2019-03-03 02:53:27] [Output] : ★ William Baumgartner then takes his socket wrench and starts tightening the gearbox to the engine evenly -
  64. [2019-03-03 02:53:33] [Output] : ★ around the gearbox ((William Baumgartner))
  65. [2019-03-03 02:55:16] [Output] : ★ William Baumgartner now starts pumping up the whole engine and the gearbox attached to it
  66. [2019-03-03 02:55:29] [Output] : ★ William Baumgartner starts driving the engine towards the engine bay of the car
  67. [2019-03-03 02:55:50] [Output] : ★ William Baumgartner raises the engine enough so it clears the radiator support
  68. [2019-03-03 02:56:40] [Output] : ★ William Baumgartner pushes the gearbox into the engine bay and then starts tilting the engine, pushing the -
  69. [2019-03-03 02:56:47] [Output] : ★ gearbox into the trans tunnel ((William Baumgartner))
  70. [2019-03-03 02:57:15] [Output] : ★ William Baumgartner then keeps pushing the engine towards the engine bay, lowering at the same time
  71. [2019-03-03 02:58:14] [Output] : ★ William Baumgartner keeps on pushing the engine inwards until the gearbox is in the tranny tunnel and -
  72. [2019-03-03 02:58:21] [Output] : ★ the engine is inside the engine bay ((William Baumgartner))
  73. [2019-03-03 02:58:50] [Output] : ★ William Baumgartner would start dropping the engine down little by little, adjusting the position of the engine
  74. [2019-03-03 02:59:05] [Output] : ★ towards the engine mounts on the chassis ((William Baumgartner))
  75. [2019-03-03 02:59:26] [Output] : ★ William Baumgartner drops the engine down even more and starts wiggling it around a little, waiting until it -
  76. [2019-03-03 02:59:34] [Output] : ★ drops in place onto the engine mounts ((William Baumgartner))
  77. [2019-03-03 03:00:45] [Output] : ★ William Baumgartner then goes to the engine crate and takes some bolts
  78. [2019-03-03 03:03:19] [Output] : ★ William Baumgartner goes to the right side engine mount and slides the bolts into the engine through the mount
  79. [2019-03-03 03:03:39] [Output] : ★ William Baumgartner now goes to the left side of the engine and threads some bolts into the engine through the
  80. [2019-03-03 03:03:41] [Output] : ★ mount ((William Baumgartner))
  81. [2019-03-03 03:05:38] [Output] : ★ William Baumgartner now grabs his wrench and starts tightening the bolts on both the left and right side engine
  82. [2019-03-03 03:05:54] [Output] : ★ mounts equally, keeping the pressure around the same on both sides at all times ((William Baumgartner))
  83. [2019-03-03 03:06:22] [Output] : ★ William Baumgartner disconnects the engine hoist from the engine itself and moves it out of the way
  84. [2019-03-03 03:06:40] [Output] : ★ William Baumgartner goes to the car lift control centre and lifts the car up just a little
  85. [2019-03-03 03:07:02] [Output] : ★ William Baumgartner locates the transmission crossmember from the pile of uninstalled stuff and goes under the
  86. [2019-03-03 03:07:11] [Output] : ★ car with the crossmember and the hardware for it ((William Baumgartner))
  87. [2019-03-03 03:07:38] [Output] : ★ William Baumgartner mocks up the crossmember in place, then threads some hardware through the mounting
  88. [2019-03-03 03:07:40] [Output] : ★ holes ((William Baumgartner))
  89. [2019-03-03 03:08:01] [Output] : ★ William Baumgartner starts tightening the hardware on hte brace equally, making it tight in the process
  90. [2019-03-03 03:11:52] [Output] : ★ William Baumgartner now goes to the box on the ground that contains all the various exhaust pieces.
  91. [2019-03-03 03:12:09] [Output] : ★ William Baumgartner grabs the left hand side header with the gasket and hardware.
  92. [2019-03-03 03:13:15] [Output] : ★ William Baumgartner slips the gasket over the studs on the engine and then snakes the header onto the studs as w
  93. [2019-03-03 03:13:17] [Output] : ★ well ((William Baumgartner))
  94. [2019-03-03 03:13:35] [Output] : ★ William Baumgartner grabs the nuts and places them all onto the studs
  95. [2019-03-03 03:13:53] [Output] : ★ William Baumgartner goes to the exhaust box and reads up the torque specs for the 3 passes
  96. [2019-03-03 03:14:05] [Output] : ★ William Baumgartner grabs his torque wrench and sets the force of the 1st pass
  97. [2019-03-03 03:14:22] [Output] : ★ William Baumgartner goes around the header in a star pattern, tightening it evenly
  98. [2019-03-03 03:14:42] [Output] : ★ William Baumgartner increases the torque for pass two, then proceeds to tighten the nuts evenly
  99. [2019-03-03 03:15:01] [Output] : ★ William Baumgartner then increases the torque spec to the 3rd level and tightens the nuts evenly again
  100. [2019-03-03 03:15:26] [Output] : ★ William Baumgartner sets the wrench aside and grabs the right hand side header with the gasket and hardware
  101. [2019-03-03 03:15:43] [Output] : ★ William Baumgartner slips the gasket over the studs onto the exhaust ports on the car
  102. [2019-03-03 03:16:17] [Output] : ★ William Baumgartner then snakes the header in place, placing it against the gasket
  103. [2019-03-03 03:16:35] [Output] : ★ William Baumgartner then places the nuts onto the studs and grabs his torque wrench
  104. [2019-03-03 03:16:56] [Output] : ★ William Baumgartner sets the torque for the first pass and then torques up the nuts
  105. [2019-03-03 03:17:10] [Output] : ★ William Baumgartner then sets the torque for the second pass and tightens the nuts evenly
  106. [2019-03-03 03:17:32] [Output] : ★ William Baumgartner then sets the torque for the 3rd pass and tightens the nuts for the last time evenly
  107. [2019-03-03 03:19:15] [Output] : ★ William Baumgartner then sets his torque wrench aside
  108. [2019-03-03 03:20:48] [Output] : ★ William Baumgartner goes to the drivetrain kit box on the ground and grabs the carbon driveshaft from it
  109. [2019-03-03 03:21:10] [Output] : ★ William Baumgartner goes under the car with it and slips the transmission part into the tranny
  110. [2019-03-03 03:21:19] [Output] : ★ William Baumgartner then places the other end against the differential
  111. [2019-03-03 03:21:43] [Output] : ★ William Baumgartner takes the bolts from his pocket and slips them into the mounting holes in the driveshaft,
  112. [2019-03-03 03:21:59] [Output] : ★ rotating the driveshaft in the proccess to gain access to all the mounts ((William Baumgartner))
  113. [2019-03-03 03:22:18] [Output] : ★ William Baumgartner then grabs his wrench and begins to tighten up the bolts evenly
  114. [2019-03-03 03:27:06] [Output] : ★ William Baumgartner now goes back to the exhaust kit package and grabs the left exhaust pipe
  115. [2019-03-03 03:27:21] [Output] : ★ William Baumgartner takes it under the car and mocks it in place
  116. [2019-03-03 03:27:52] [Output] : ★ William Baumgartner moves the exhaust around a little, tries to get it hang on the hangers
  117. [2019-03-03 03:28:14] [Output] : ★ William Baumgartner then goes back to the box, grabs a gasket and a band clamp.
  118. [2019-03-03 03:29:22] [Output] : ★ William Baumgartner slides the band clamp over the exhaust pipe and then places the gasket betwen the -
  119. [2019-03-03 03:29:43] [Output] : ★ exhaust pipe and the header, slipping bolts and nuts through the mounting hole ((William Baumgartner))
  120. [2019-03-03 03:31:02] [Output] : ★ William Baumgartner starts tightening the hardware, joining hte two pipes together
  121. [2019-03-03 03:32:09] [Output] : ★ William Baumgartner then goes to the exhaust kit box again and grabs the right side exhaust pipe with gaskets-
  122. [2019-03-03 03:32:12] [Output] : ★ and hardware ((William Baumgartner))
  123. [2019-03-03 03:34:19] [Output] : ★ William Baumgartner moves the right side exhaust pipe towards it's place and then moves it around ,trying to -
  124. [2019-03-03 03:34:28] [Output] : ★ get the exhaust hanging on the hangers ((William Baumgartner))
  125. [2019-03-03 03:34:49] [Output] : ★ William Baumgartner then adjusts the position of the exhaust a little, pushing it towards hte right header
  126. [2019-03-03 03:35:59] [Output] : ★ William Baumgartner stuffs the gasket between the header and the exhaust pipe and places the bolts between the
  127. [2019-03-03 03:36:09] [Output] : ★ mounting holes, then places nuts on the ends of the bolts ((William Baumgartner))
  128. [2019-03-03 03:36:24] [Output] : ★ William Baumgartner starts tightening the hardware up
  129. [2019-03-03 03:37:34] [Output] : ★ William Baumgartner goes back to the exhaust kit and grabs a custom fabricated exhaust bracket
  130. [2019-03-03 03:37:48] [Output] : ★ William Baumgartner goes under the car with the bracket and the hardware
  131. [2019-03-03 03:38:09] [Output] : ★ William Baumgartner places the bracket into it's position, supporting both of the exhaust pipes
  132. [2019-03-03 03:38:33] [Output] : ★ William Baumgartner then threads the hardware through the holes in the bottom of the car
  133. [2019-03-03 03:38:44] [Output] : ★ William Baumgartner grabs his wrench and tightens the hardware evenly
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!