Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.1.10-g55edff4 (android-build@vpbs1.mtv.corp.google.com) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 18 15:56:26 PDT 2012
- <4>[ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: grouper
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <6>[ 0.000000] Found tegra_fbmem: 007d0c80@abe01000
- <6>[ 0.000000] Tegra reserved memory:
- <6>[ 0.000000] LP0: bddf9000 - bddfafff
- <6>[ 0.000000] Bootloader framebuffer: abe01000 - ac5d1fff
- <6>[ 0.000000] Framebuffer: bec00000 - bf4fffff
- <6>[ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
- <6>[ 0.000000] Carveout: 00000000 - 00000000
- <6>[ 0.000000] Vpr: 00000000 - 00000000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <7>[ 0.000000] On node 0 totalpages: 256768
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c09c4f00, node_mem_map c102a000
- <7>[ 0.000000] Normal zone: 1728 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 194880 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 572 pages used for memmap
- <7>[ 0.000000] HighMem zone: 59588 pages, LIFO batch:15
- <6>[ 0.000000] fuse_speedo_calib: ATE prog ver 3.4
- <6>[ 0.000000] Tegra3: CPU Speedo ID 7, Soc Speedo ID 1
- <6>[ 0.000000] Tegra Revision: A03 SKU: 0x83 CPU Process: 2 Core Process: 0
- <6>[ 0.000000] tegra: PLLP fixed rate: 408000000
- <4>[ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 500000000
- <4>[ 0.000000] Lowering sbus maximum rate from 378000000 to 267000000
- <4>[ 0.000000] Lowering vi maximum rate from 470000000 to 409000000
- <4>[ 0.000000] Lowering vde maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering mpe maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering 2d maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering epp maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering 3d maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering 3d2 maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering se maximum rate from 625000000 to 416000000
- <4>[ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
- <4>[ 0.000000] Lowering cbus maximum rate from 700000000 to 416000000
- <4>[ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
- <4>[ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
- <4>[ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
- <4>[ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
- <4>[ 0.000000] Lowering cpu_g maximum rate from 1700000000 to 1300000000
- <6>[ 0.000000] tegra dvfs: VDD_CPU nominal 1050mV, scaling enabled
- <6>[ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
- <6>[ 0.000000] L310 cache controller enabled
- <6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
- <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1932000 s11104 r8192 d13472 u32768
- <7>[ 0.000000] pcpu-alloc: s11104 r8192 d13472 u32768 alloc=8*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254468
- <5>[ 0.000000] Kernel command line: tegra_wdt.heartbeat=30 tegraid=30.1.3.0.0 mem=1022M@2048M android.commchip=0 vmalloc=128M androidboot.serialno=015d172c9a5bf208 video=tegrafb no_console_suspend=1 console=none debug_uartport=hsport usbcore.old_scheme_first=1 lp0_vec=8192@0xbddf9000 tegra_fbmem=8195200@0xabe01000 core_edp_mv=0 audio_codec=rt5640 board_info=f41:a00:1:44:2 tegraboot=sdmmc gpt gpt_sector=14934015 androidboot.bootloader=3.34
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Memory: 1003MB = 1003MB total
- <5>[ 0.000000] Memory: 997108k/997108k available, 49420k reserved, 240632K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc08d2068 (9001 kB)
- <5>[ 0.000000] .init : 0xc08d3000 - 0xc0917b60 ( 275 kB)
- <5>[ 0.000000] .data : 0xc0918000 - 0xc09d6898 ( 763 kB)
- <5>[ 0.000000] .bss : 0xc09d68bc - 0xc0b579b0 (1541 kB)
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:800
- <6>[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- <6>[ 0.000173] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)
- <6>[ 0.060080] pid_max: default: 32768 minimum: 301
- <6>[ 0.060232] Mount-cache hash table entries: 512
- <6>[ 0.060825] Initializing cgroup subsys debug
- <6>[ 0.060836] Initializing cgroup subsys cpuacct
- <6>[ 0.060880] Initializing cgroup subsys freezer
- <6>[ 0.060905] CPU: Testing write buffer coherency: ok
- <6>[ 0.061112] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- <4>[ 0.181573] CPU1: Booted secondary processor
- <4>[ 0.241561] CPU2: Booted secondary processor
- <4>[ 0.301557] CPU3: Booted secondary processor
- <6>[ 0.321090] Brought up 4 CPUs
- <6>[ 0.321102] SMP: Total of 4 processors activated (7975.73 BogoMIPS).
- <6>[ 0.324434] print_constraints: dummy:
- <6>[ 0.324614] NET: Registered protocol family 16
- <6>[ 0.325352] host1x bus init
- <6>[ 0.325408] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- <4>[ 0.442518] The pingroup KB_ROW0 was configured to RSVD3 instead of <UNKNOWN>
- <4>[ 0.443371] tegra_booting_info reg=3
- <4>[ 0.443377] tegra_booting_info-SW reboot
- <6>[ 0.443753] grouper_edp_init: CPU regulator 6000 mA
- <3>[ 0.443900] fiq_debugger_probe: could not install irq handler
- <4>[ 0.443916] fiq_debugger: probe of fiq_debugger.0 failed with error -22
- <6>[ 0.444965] ram_console: got buffer at beb00000, size 100000
- <6>[ 0.445047] ram_console: found existing buffer, size 917476, start 791916
- <6>[ 2.907139] console [ram-1] enabled
- <4>[ 3.031084] [ELAN] Touch dirver register
- <6>[ 3.031224] Registering gpio keys
- <6>[ 3.031633] mi1040 i2c_register_board_info
- <6>[ 3.031712] *** MPU START *** mpuirq_init...
- <6>[ 3.031910] *** MPU END *** mpuirq_init...
- <4>[ 3.032040] grouper_emc_init:mem_bootstrap_ad4=1 mem_bootstrap_ad5=0
- <6>[ 3.032244] tegra: validated EMC DFS table
- <4>[ 3.032319] grouper_emc_init:Nakasi_dvfs_Hynix_table_0430
- <6>[ 3.032454] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- <6>[ 3.032528] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
- <6>[ 3.032672] hw-breakpoint: maximum watchpoint size is 4 bytes.
- <6>[ 3.033471] tegra_iovmm_register: added iovmm-smmu
- <6>[ 3.039903] bio: create slab <bio-0> at 0
- <6>[ 3.040586] vgaarb: loaded
- <4>[ 3.040725] i2c-core: driver [tps6591x] using legacy suspend method
- <4>[ 3.040855] i2c-core: driver [tps6591x] using legacy resume method
- <4>[ 3.040945] i2c-core: driver [tps80031] using legacy suspend method
- <4>[ 3.041098] i2c-core: driver [tps80031] using legacy resume method
- <4>[ 3.041273] i2c-core: driver [ricoh583] using legacy suspend method
- <4>[ 3.041346] i2c-core: driver [ricoh583] using legacy resume method
- <5>[ 3.041701] SCSI subsystem initialized
- <6>[ 3.042700] usbcore: registered new interface driver usbfs
- <6>[ 3.042838] usbcore: registered new interface driver hub
- <6>[ 3.043047] usbcore: registered new device driver usb
- <6>[ 3.043190] tegra-otg tegra-otg: otg transceiver registered
- <4>[ 3.045163] [MAX77663 probe]:CID4=23!
- <6>[ 3.048305] Wake18 for irq=118
- <6>[ 3.048379] Enabling wake18
- <6>[ 3.050739] print_constraints: max77663_sd0: 600 <--> 3387 mV at 1025 mV normal standby
- <6>[ 3.051720] print_constraints: max77663_sd1: 800 <--> 1587 mV at 1200 mV normal standby
- <6>[ 3.052739] print_constraints: max77663_sd2: 1800 mV normal standby
- <6>[ 3.053796] print_constraints: max77663_sd3: 600 <--> 3387 mV at 1350 mV normal standby
- <6>[ 3.054788] print_constraints: max77663_ldo0: 800 <--> 2350 mV at 1000 mV normal standby
- <6>[ 3.054935] set_supply: max77663_ldo0: supplied by max77663_sd3
- <6>[ 3.055994] print_constraints: max77663_ldo1: 800 <--> 2350 mV at 1200 mV normal standby
- <6>[ 3.056085] set_supply: max77663_ldo1: supplied by max77663_sd3
- <6>[ 3.057121] print_constraints: max77663_ldo2: 800 <--> 3950 mV at 2800 mV normal standby
- <6>[ 3.058168] print_constraints: max77663_ldo3: 800 <--> 3950 mV at 2850 mV normal standby
- <6>[ 3.059381] print_constraints: max77663_ldo4: 800 <--> 1587 mV at 1000 mV normal standby
- <6>[ 3.060390] print_constraints: max77663_ldo5: 800 <--> 2800 mV at 2800 mV normal standby
- <6>[ 3.061420] print_constraints: max77663_ldo6: 800 <--> 3950 mV at 3300 mV normal standby
- <6>[ 3.062406] print_constraints: max77663_ldo7: 800 <--> 3950 mV at 1200 mV normal standby
- <6>[ 3.062552] set_supply: max77663_ldo7: supplied by max77663_sd3
- <6>[ 3.063576] print_constraints: max77663_ldo8: 800 <--> 3950 mV at 1200 mV normal standby
- <6>[ 3.063665] set_supply: max77663_ldo8: supplied by max77663_sd3
- <6>[ 3.064039] max77663 register misc device for I2C stress test rc=0
- <6>[ 3.069220] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 3.069706] Bluetooth: Core ver 2.16
- <6>[ 3.069812] NET: Registered protocol family 31
- <6>[ 3.069947] Bluetooth: HCI device and connection manager initialized
- <6>[ 3.070025] Bluetooth: HCI socket layer initialized
- <6>[ 3.070158] Bluetooth: L2CAP socket layer initialized
- <6>[ 3.070242] Bluetooth: SCO socket layer initialized
- <6>[ 3.070624] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 3.070847] NFC: NFC Core ver 0.1
- <6>[ 3.070950] NET: Registered protocol family 39
- <6>[ 3.071249] print_constraints: fixed_reg_en_3v3_sys_a01: 3300 mV normal standby
- <6>[ 3.071693] print_constraints: fixed_reg_en_avdd_hdmi_usb_a01: 3300 mV normal standby
- <6>[ 3.071775] set_supply: fixed_reg_en_avdd_hdmi_usb_a01: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 3.072089] print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
- <6>[ 3.072232] set_supply: fixed_reg_en_1v8_cam: supplied by max77663_sd2
- <6>[ 3.072500] print_constraints: fixed_reg_en_vddio_vid: 5000 mV normal standby
- <6>[ 3.072782] print_constraints: fixed_reg_en_3v3_modem: 3300 mV normal standby
- <6>[ 3.073029] print_constraints: fixed_reg_en_vdd_pnl: 3300 mV normal standby
- <6>[ 3.073169] set_supply: fixed_reg_en_vdd_pnl: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 3.073486] print_constraints: fixed_reg_en_cam3_ldo: 3300 mV normal standby
- <6>[ 3.073569] set_supply: fixed_reg_en_cam3_ldo: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 3.073891] print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
- <6>[ 3.074034] set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 3.074317] print_constraints: fixed_reg_en_vdd_sdmmc1: 3300 mV normal standby
- <6>[ 3.074459] set_supply: fixed_reg_en_vdd_sdmmc1: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 3.074768] print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
- <6>[ 3.074851] set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 3.075175] print_constraints: fixed_reg_cdc_en: 1200 mV normal standby
- <6>[ 3.075321] set_supply: fixed_reg_cdc_en: supplied by max77663_sd2
- <6>[ 3.075916] tegra: started io power detection dynamic control
- <6>[ 3.076052] tegra: NO_IO_POWER setting 0x1200
- <6>[ 3.076128] Switching to clocksource timer_us
- <4>[ 3.076223] stop_machine_cpu_stop smp=1
- <4>[ 3.076229] stop_machine_cpu_stop smp=0
- <4>[ 3.076235] stop_machine_cpu_stop smp=3
- <4>[ 3.076242] stop_machine_cpu_stop smp=2
- <6>[ 3.081111] Switched to NOHz mode on CPU #0
- <6>[ 3.081589] Switched to NOHz mode on CPU #3
- <6>[ 3.081596] Switched to NOHz mode on CPU #2
- <6>[ 3.081607] Switched to NOHz mode on CPU #1
- <6>[ 3.086233] nvmap_page_pool_init: nvmap uc page pool size=31159 pages
- <6>[ 3.182035] nvmap_page_pool_init: nvmap wc page pool size=31159 pages
- <6>[ 3.281218] nvmap_page_pool_init: nvmap iwb page pool size=31159 pages
- <6>[ 3.419984] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
- <6>[ 3.421129] NET: Registered protocol family 2
- <6>[ 3.421417] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 3.421855] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 3.423499] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- <6>[ 3.424486] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 3.424559] TCP reno registered
- <6>[ 3.424692] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 3.424786] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 3.425132] NET: Registered protocol family 1
- <6>[ 3.425461] RPC: Registered named UNIX socket transport module.
- <6>[ 3.425597] RPC: Registered udp transport module.
- <6>[ 3.425668] RPC: Registered tcp transport module.
- <6>[ 3.425740] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <7>[ 3.425875] PCI: CLS 0 bytes, default 32
- <6>[ 3.426066] Unpacking initramfs...
- <6>[ 3.434908] Freeing initrd memory: 164K
- <6>[ 3.435786] host1x host1x: initialized
- <6>[ 3.435937] PMU: registered new PMU device of type 0
- <6>[ 3.436413] Tegra auto-hotplug initialized: disabled
- <6>[ 3.436497] cpu-tegra: init EDP limit: 1150 MHz
- <4>[ 3.454346] highmem bounce pool size: 64 pages
- <6>[ 3.454582] ashmem: initialized
- <6>[ 3.455581] NTFS driver 2.1.30 [Flags: R/O].
- <6>[ 3.455807] fuse init (API version 7.17)
- <6>[ 3.455997] Registering char device tf_driver (122:0)
- <6>[ 3.456158] TF : INFO 00000001 00:00:00.000 ------ ------ --------------- Booting... (t=00:00:07.653) TFNXBF01.08.34931 /Trusted-Logic
- <6>[ 3.457251] io scheduler noop registered
- <6>[ 3.457388] io scheduler deadline registered
- <6>[ 3.457510] io scheduler cfq registered (default)
- <6>[ 3.458447] mpe mpe: initialized
- <6>[ 3.459638] gr3d gr3d: initialized
- <6>[ 3.459849] dsi dsi: initialized
- <6>[ 3.460586] gr2d gr2d: initialized
- <6>[ 3.460863] isp isp: initialized
- <6>[ 3.461070] vi vi: initialized
- <4>[ 3.461602] Disp: diff_msec= 7658
- <6>[ 3.707341] tegradc tegradc.0: probed
- <6>[ 3.707648] tegradc tegradc.0: probed
- <6>[ 3.707922] Wake4 for irq=335
- <6>[ 3.708380] nvhdcp: using "always on" policy.
- <6>[ 3.708764] tegradc tegradc.1: probed
- <6>[ 3.709062] tegradc tegradc.1: probed
- <6>[ 3.709643] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
- <6>[ 3.906651] Registered UART port ttyHS1
- <6>[ 3.906802] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
- <6>[ 4.066654] Registered UART port ttyHS2
- <6>[ 4.066799] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
- <6>[ 4.226654] Registered UART port ttyHS3
- <6>[ 4.226799] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
- <6>[ 4.386653] Registered UART port ttyHS4
- <6>[ 4.386811] Initialized tegra uart driver
- <6>[ 4.389260] loop: module loaded
- <4>[ 4.389420] i2c-core: driver [apds9802als] using legacy suspend method
- <4>[ 4.389554] i2c-core: driver [apds9802als] using legacy resume method
- <6>[ 4.389671] at24 4-0056: 32768 byte at24 EEPROM, writable, 64 bytes/write
- <4>[ 4.389875] tegra-i2c tegra-i2c.4: I2c error status 0x00000008
- <4>[ 4.389951] tegra-i2c tegra-i2c.4: no acknowledge from address 0x56
- <4>[ 4.390085] tegra-i2c tegra-i2c.4: Packet status 0x00010009
- <4>[ 4.406721] tegra-i2c tegra-i2c.4: I2c error status 0x00000008
- <4>[ 4.406856] tegra-i2c tegra-i2c.4: no acknowledge from address 0x56
- <4>[ 4.406930] tegra-i2c tegra-i2c.4: Packet status 0x00010009
- <4>[ 4.426719] tegra-i2c tegra-i2c.4: I2c error status 0x00000008
- <4>[ 4.426796] tegra-i2c tegra-i2c.4: no acknowledge from address 0x56
- <4>[ 4.426931] tegra-i2c tegra-i2c.4: Packet status 0x00010009
- <3>[ 4.446660] Error reading MAC addr from EEPROM
- <4>[ 4.446864] nct1008_probe+
- <6>[ 4.446953] nct1008 4-004c: no regulator found for vdd. Assuming vdd is always powered
- <6>[ 4.449264] nct1008 register misc device for I2C stress test rc=0
- <6>[ 4.449529] nct1008 4-004c: nct1008_probe: initialized
- <4>[ 4.450655] nct1008_get_temp: ret temp=30C
- <4>[ 4.451003] nct1008_probe-
- <4>[ 4.451112] i2c-core: driver [nct1008] using legacy suspend method
- <4>[ 4.451247] i2c-core: driver [nct1008] using legacy resume method
- <4>[ 4.451389] bcm4330_rfkill_probe: can't find bcm4330_32k_clk. assuming 32k clock to chip
- <4>[ 4.451467] bcm4330_rfkill_probe : can't find reset gpio.
- <3>[ 4.451777] vibrator_init:Couldn't get regulator vdd_vbrtr
- <6>[ 4.451900] Loading pn544 driver
- <6>[ 4.452057] pn544_probe : requesting IRQ 408
- <6>[ 4.452445] PPP generic driver version 2.4.2
- <6>[ 4.452610] PPP Deflate Compression module registered
- <6>[ 4.452744] PPP BSD Compression module registered
- <6>[ 4.453454] PPP MPPE Compression module registered
- <6>[ 4.453593] NET: Registered protocol family 24
- <6>[ 4.454009] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 4.454088] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 4.454337] usbcore: registered new interface driver asix
- <6>[ 4.454447] usbcore: registered new interface driver cdc_ether
- <6>[ 4.454622] usbcore: registered new interface driver smsc95xx
- <6>[ 4.454725] usbcore: registered new interface driver cdc_subset
- <6>[ 4.454863] cdc_ncm: 04-Aug-2011
- <6>[ 4.454965] usbcore: registered new interface driver cdc_ncm
- <4>[ 4.456428] grouper_query_pcba_revision=0x03
- <6>[ 4.456566] Wake1 for irq=393
- <4>[ 4.456704] GPIO pin irq 393 requested ok, smb347_INOK = L
- <4>[ 4.456841] INOK=L
- <5>[ 4.457117] smb347_charger: [cable_type_detect] Reg3F : 0xc0
- <5>[ 4.457387] smb347_charger: [cable_type_detect] Reg3E : 0x0c
- <4>[ 4.457520] Cable: SDP
- <5>[ 4.457590] battery_callback battery driver not ready
- <4>[ 4.457752] i2c-core: driver [smb347] using legacy suspend method
- <4>[ 4.457827] i2c-core: driver [smb347] using legacy resume method
- <5>[ 4.457986] bq27541_probe + client->addr= 55
- <5>[ 4.458727] bq27541_get_psp status: Discharging ret= 0x0101
- <5>[ 4.459448] bq27541_get_psp voltage_now= 3773 mV
- <5>[ 4.460099] bq27541_get_capacity = 36% ret= 40
- <5>[ 4.460752] bq27541_get_psp temperature= 236 (0.1「XC)
- <6>[ 4.461410] Wake25 for irq=372
- <5>[ 4.461518] setup_low_battery_irq irq=372, LL_BAT_T30=0
- <5>[ 4.461683] bq27541_get_psp status: Discharging ret= 0x0101
- <6>[ 4.461792] Wake25 for irq=372
- <6>[ 4.461865] Enabling wake25
- <6>[ 4.461996] gpio bank wake found: wake25 for irq=87
- <6>[ 4.462068] Enabling wake25
- <6>[ 4.462185] The USB cable status = 0
- <5>[ 4.462317] bq27541_probe - bq27541-battery driver registered
- <4>[ 4.462421] i2c-core: driver [bq27541-battery] using legacy suspend method
- <5>[ 4.462586] bq27541_get_psp voltage_now= 3773 mV
- <4>[ 4.462685] i2c-core: driver [bq27541-battery] using legacy resume method
- <6>[ 4.462824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <3>[ 4.467066] Timed out waiting for lock bit on pll pll_u
- <5>[ 4.467252] bq27541_get_capacity = 36% ret= 40
- <5>[ 4.467958] bq27541_get_psp temperature= 236 (0.1「XC)
- <6>[ 4.471174] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
- <6>[ 4.471330] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
- <6>[ 4.496677] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
- <6>[ 4.516663] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
- <6>[ 4.516847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 4.516924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 4.517057] usb usb1: Product: Tegra EHCI Host Controller
- <6>[ 4.517130] usb usb1: Manufacturer: Linux 3.1.10-g55edff4 ehci_hcd
- <6>[ 4.517261] usb usb1: SerialNumber: tegra-ehci.1
- <6>[ 4.517607] hub 1-0:1.0: USB hub found
- <6>[ 4.517759] hub 1-0:1.0: 1 port detected
- <6>[ 4.518023] Wake40 for irq=53
- <6>[ 4.518097] Enabling wake40
- <6>[ 4.518389] usbcore: registered new interface driver cdc_acm
- <6>[ 4.518464] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 4.518633] usbcore: registered new interface driver cdc_wdm
- <6>[ 4.518707] Initializing USB Mass Storage driver...
- <6>[ 4.518906] usbcore: registered new interface driver usb-storage
- <6>[ 4.518980] USB Mass Storage support registered.
- <6>[ 4.519163] usbcore: registered new interface driver libusual
- <6>[ 4.519329] usbcore: registered new interface driver usbserial
- <6>[ 4.519463] usbserial: USB Serial Driver core
- <6>[ 4.519562] USB Serial support registered for GSM modem (1-port)
- <6>[ 4.519786] usbcore: registered new interface driver option
- <6>[ 4.519860] option: v0.7.2:USB Driver for GSM modems
- <6>[ 4.520016] USB Serial support registered for pl2303
- <6>[ 4.520135] usbcore: registered new interface driver pl2303
- <6>[ 4.520209] pl2303: Prolific PL2303 USB to serial adaptor driver
- <6>[ 4.520340] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
- <6>[ 4.520472] read_hw_version 0X3
- <6>[ 4.520690] phy->instance = 0, phy->xcvr_setup_value = 56
- <4>[ 4.520777] create_regulator: fixed_reg_en_avdd_hdmi_usb_a01: Failed to create debugfs directory
- <6>[ 4.520915] tegra_usb_phy_open instance 0 g_cid4 0X23 MAX77663_IRQ_ACOK_RISING
- <6>[ 4.523770] fsl-tegra-udc fsl-tegra-udc: usb_bat_chg regulator not registered: USB charging will not be enabled
- <6>[ 4.523979] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
- <6>[ 4.524055] fsl_vbus_session(): vbus_active = 0 and is_active = 1
- <6>[ 4.526139] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 4.526218] android_usb gadget: Number of LUNs=1
- <6>[ 4.526352] lun0: LUN: removable file: (no medium)
- <4>[ 4.526590] Gadget Android: controller 'fsl-tegra-udc' not recognized
- <6>[ 4.526747] android_usb gadget: android_usb ready
- <6>[ 4.526822] fsl-tegra-udc: bind to driver android_usb
- <6>[ 4.527097] usbcore: registered new interface driver xpad
- <6>[ 4.527209] usbcore: registered new interface driver usb_acecad
- <6>[ 4.527341] acecad: v3.2:USB Acecad Flair tablet driver
- <6>[ 4.527444] usbcore: registered new interface driver aiptek
- <6>[ 4.527575] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- <6>[ 4.527648] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- <6>[ 4.527807] usbcore: registered new interface driver gtco
- <4>[ 4.527880] GTCO usb driver version: 2.00.0006
- <6>[ 4.528039] usbcore: registered new interface driver hanwang
- <6>[ 4.528213] usbcore: registered new interface driver kbtab
- <6>[ 4.528343] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- <6>[ 4.528454] usbcore: registered new interface driver wacom
- <6>[ 4.528586] wacom: v1.52:USB Wacom tablet driver
- <4>[ 4.528659] [ektf3k]:[elan] elan_ktf3k_ts_init
- <4>[ 4.528876] [ektf3k]:[ELAN] Start HW reset!
- <4>[ 4.786662] [ektf3k]:The boot code is new!
- <4>[ 4.966662] INOK=L
- <5>[ 4.966929] smb347_charger: [cable_type_detect] Reg3F : 0xc0
- <5>[ 4.967188] smb347_charger: [cable_type_detect] Reg3E : 0x0c
- <4>[ 4.967260] Cable: SDP
- <4>[ 4.967329] ========================================================
- <4>[ 4.967400] battery_callback usb_cable_state = 1
- <4>[ 4.967528] ========================================================
- <4>[ 4.967610] inok_isr_work_function -
- <6>[ 5.516653] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
- <6>[ 5.516728] The USB cable is connected
- <4>[ 5.566811] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
- <4>[ 5.566888] [ektf3k]:[elan] hello packet's rc = 0
- <4>[ 5.778491] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xb016
- <4>[ 5.780395] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x0078
- <4>[ 5.782359] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00c6
- <4>[ 5.784271] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3021
- <4>[ 5.784409] [ektf3k]:[Elan] Max X=2111, Max Y=1279
- <6>[ 5.784618] input: elan-touchscreen as /devices/virtual/input/input0
- <4>[ 5.784859] [ektf3k]:The firmware was version 0xB016 and id:0x3021
- <4>[ 5.784958] [ektf3k]: /proc/ektf_dbg created
- <4>[ 5.785260] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
- <4>[ 5.785388] [ektf3k]:[ELAN]misc_register finished!!
- <6>[ 5.785574] in function ____rmi_bus_init____
- <6>[ 5.785741] rmi_bus_init: successfully registered RMI bus.
- <6>[ 5.785927] rmi_spi_init: registering synaptics spi driver (ref=124)
- <6>[ 5.786000] driver.owner = 0x0
- <6>[ 5.786128] driver.name = rmi_spi
- <6>[ 5.786198] id_table[0].name = rmi
- <6>[ 5.786326] id_table[1].name = rmi_spi
- <6>[ 5.786396] probe function ptr = 0xc0645618
- <6>[ 5.786546] in function ____rmi_register_driver____
- <6>[ 5.786662] in function ____rmi_get_function_handler____
- <6>[ 5.786738] in function ____rmi_get_function_handler____
- <6>[ 5.786869] in function ____rmi_get_function_handler____
- <6>[ 5.786941] in function ____rmi_get_function_handler____
- <6>[ 5.787071] in function ____rmi_get_function_handler____
- <6>[ 5.787145] in function ____rmi_get_function_handler____
- <6>[ 5.787495] lid_init+ #####
- <5>[ 5.787568] hall_sensor: [lid_init] start LID init.....
- <6>[ 5.787927] input: lid_input as /devices/virtual/input/input1
- <6>[ 5.788128] Wake28 for irq=374
- <6>[ 5.788237] Wake28 for irq=374
- <6>[ 5.788367] Enabling wake28
- <6>[ 5.818328] using rtc device, max77663-rtc, for alarms
- <6>[ 5.818418] max77663-rtc max77663-rtc.0: rtc core: registered max77663-rtc as rtc0
- <6>[ 5.819026] i2c /dev entries driver
- <6>[ 5.819477] Linux video capture interface: v2.00
- <6>[ 5.819686] usbcore: registered new interface driver uvcvideo
- <6>[ 5.819759] USB Video Class driver (1.1.1)
- <6>[ 5.819951] trpc_sema_init: registered misc dev 10:45
- <6>[ 5.820081] trpc_node_register: Adding 'local' to node list
- <6>[ 5.821208] nvavp nvavp: allocated IOVM at ff00000 for AVP os
- <6>[ 5.821552] tegra_camera tegra_camera: tegra_camera_probe
- <6>[ 5.821925] sensor_init+ #####
- <6>[ 5.822026] mi1040 sensor_probe
- <6>[ 5.822211] sensor_init- #####
- <6>[ 5.822381] al3010_init+ #####
- <4>[ 5.822511] light sensor info : al3010 init
- <4>[ 5.823345] light sensor info : al3010 probe successed
- <6>[ 5.823426] al3010 2-001c: driver version 1.0 enabled
- <4>[ 5.823717] i2c-core: driver [al3010] using legacy suspend method
- <4>[ 5.823793] i2c-core: driver [al3010] using legacy resume method
- <6>[ 5.823933] al3010_init- #####
- <6>[ 5.824272] device-mapper: uevent: version 1.0.3
- <6>[ 5.824514] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
- <6>[ 5.824615] Bluetooth: HCI UART driver ver 2.2
- <6>[ 5.824746] Bluetooth: HCI H4 protocol initialized
- <6>[ 5.824817] Bluetooth: HCILL protocol initialized
- <6>[ 5.824947] Bluetooth: BlueSleep Mode Driver Ver 1.1
- <6>[ 5.825068] Wake7 for irq=390
- <6>[ 5.825707] cpuidle: using governor ladder
- <6>[ 5.826134] cpuidle: using governor menu
- <6>[ 5.826256] sdhci: Secure Digital Host Controller Interface driver
- <6>[ 5.826387] sdhci: Copyright(c) Pierre Ossman
- <6>[ 5.826457] sdhci-pltfm: SDHCI platform and OF driver helper
- <6>[ 5.826528] sdhci_tegra_init+ #####
- <6>[ 5.826779] sdhci-tegra sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
- <4>[ 5.827873] mmc0: Invalid maximum block size, assuming 512 bytes
- <7>[ 5.829139] Registered led device: mmc0::
- <6>[ 5.832501] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
- <6>[ 5.832687] sdhci-tegra sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
- <4>[ 5.833835] mmc1: Invalid maximum block size, assuming 512 bytes
- <7>[ 5.835032] Registered led device: mmc1::
- <6>[ 5.837317] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
- <6>[ 5.837430] sdhci_tegra_init- #####
- <7>[ 5.837795] Registered led device: statled
- <6>[ 5.838962] tegra-se tegra-se: tegra_se_probe: complete
- <6>[ 5.840368] usbcore: registered new interface driver usbhid
- <6>[ 5.840568] usbhid: USB HID core driver
- <6>[ 5.840871] logger: created 256K log 'log_main'
- <6>[ 5.841061] logger: created 256K log 'log_events'
- <6>[ 5.841186] logger: created 256K log 'log_radio'
- <6>[ 5.841311] logger: created 256K log 'log_system'
- <6>[ 5.908381] [mmc]:mmc_decode_cid:113 cid.prv 0x26
- <6>[ 5.919992] [mmc]:mmc_read_ext_csd:285 ext_csd.sectors 0xe3e000 prod_name MMC08G BOOT_MULTI 0x10
- <6>[ 5.923971] mmc0: new high speed DDR MMC card at address 0001
- <6>[ 5.924238] mmcblk mmc0:0001: Card claimed for testing.
- <6>[ 5.924546] mmcblk0: mmc0:0001 MMC08G 7.12 GiB
- <6>[ 5.924771] mmcblk0boot0: mmc0:0001 MMC08G partition 1 2.00 MiB
- <6>[ 5.925056] mmcblk0boot1: mmc0:0001 MMC08G partition 2 2.00 MiB
- <4>[ 5.928718] Primary GPT is invalid, using alternate GPT.
- <6>[ 5.928894] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
- <6>[ 5.932201] mmcblk0boot1: unknown partition table
- <6>[ 5.934650] mmcblk0boot0: unknown partition table
- <6>[ 5.934899] [mmc]:mmc_rescan_try_freq:1896 mmc0: eMMC completed
- <6>[ 6.397474] inv_mpu_probe: Probe name mpu6050
- <6>[ 6.397553] i2c i2c-2: MPU6050 is ready to go!
- <4>[ 6.397742] i2c-core: driver [LTR_558ALS] using legacy suspend method
- <4>[ 6.397876] i2c-core: driver [LTR_558ALS] using legacy resume method
- <6>[ 6.398800] inv_ami306_probe: Probe name ami306
- <6>[ 6.896661] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
- <4>[ 6.937288] rt5640_modinit
- <4>[ 6.937394] rt5640_i2c_probe
- <4>[ 6.937505] i2c-core: driver [rt5640] using legacy suspend method
- <4>[ 6.937638] i2c-core: driver [rt5640] using legacy resume method
- <5>[ 6.967271] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 6.967989] bq27541_get_psp voltage_now= 3784 mV
- <5>[ 6.968639] bq27541_get_capacity = 36% ret= 40
- <5>[ 6.969291] bq27541_get_psp temperature= 236 (0.1「XC)
- <6>[ 7.168194] DSP version code = 0x501a
- <4>[ 7.168431] ************************realtek_ce_init_hwdep*************************************
- <4>[ 7.168571] do_rt5640_dsp_set_mode mode=0
- <6>[ 7.168652] rt5640 4-001c: w->name=SDI1 TX Mux
- <6>[ 7.168787] rt5640 4-001c: path->name=IF2 path->connect=0
- <6>[ 7.168862] rt5640 4-001c: path->name=IF1 path->connect=1
- <6>[ 7.169040] rt5640 4-001c: w->name=Stereo DAC MIXL
- <6>[ 7.169117] rt5640 4-001c: path->name=DAC L1 Switch connect=1
- <6>[ 7.169277] rt5640 4-001c: w->name=Stereo DAC MIXL
- <6>[ 7.169353] rt5640 4-001c: path->name=DAC L2 Switch connect=0
- <6>[ 7.169610] rt5640 4-001c: w->name=Stereo DAC MIXR
- <6>[ 7.169746] rt5640 4-001c: path->name=DAC R1 Switch connect=1
- <6>[ 7.169853] rt5640 4-001c: w->name=Stereo DAC MIXR
- <6>[ 7.169988] rt5640 4-001c: path->name=DAC R2 Switch connect=0
- <6>[ 7.170249] rt5640 4-001c: w->name=Stereo ADC MIXL
- <6>[ 7.170385] rt5640 4-001c: path->name=ADC1 Switch connect=1
- <6>[ 7.170491] rt5640 4-001c: w->name=Stereo ADC MIXR
- <6>[ 7.170624] rt5640 4-001c: path->name=ADC1 Switch connect=1
- <6>[ 7.170725] rt5640 4-001c: w->name=Stereo ADC MIXL
- <6>[ 7.170856] rt5640 4-001c: path->name=ADC2 Switch connect=1
- <6>[ 7.170956] rt5640 4-001c: w->name=Stereo ADC MIXR
- <6>[ 7.171031] rt5640 4-001c: path->name=ADC2 Switch connect=1
- <6>[ 7.171191] rt5640 4-001c: w->name=Mono ADC MIXL
- <6>[ 7.171266] rt5640 4-001c: path->name=ADC2 Switch connect=0
- <6>[ 7.171423] rt5640 4-001c: w->name=Mono ADC MIXR
- <6>[ 7.171497] rt5640 4-001c: path->name=ADC2 Switch connect=0
- <6>[ 7.178736] asoc: rt5640-aif1 <-> tegra30-i2s.1 mapping ok
- <6>[ 7.181837] asoc: dit-hifi <-> tegra30-spdif mapping ok
- <6>[ 7.186385] asoc: dit-hifi <-> tegra30-i2s.3 mapping ok
- <6>[ 7.187096] headset_init+ #####
- <4>[ 7.187169] HEADSET: Headset detection init
- <4>[ 7.187463] HEADSET: Headset detection mode
- <4>[ 7.187538] HEADSET: Config Headset Button detection gpio
- <7>[ 7.187673] gpio_request: gpio-186 (btn_INT) status -16
- <4>[ 7.187745] HEADSET: Config uart<->headphone gpio
- <4>[ 7.187876] HEADSET: Config Jack-in detection gpio
- <4>[ 7.187948] HEADSET: Turn on micbias power
- <6>[ 7.188027] Wake12 for irq=402
- <6>[ 7.188208] Wake12 for irq=402
- <6>[ 7.188280] Enabling wake12
- <6>[ 7.188353] gpio bank wake found: wake12 for irq=119
- <6>[ 7.188483] Enabling wake12
- <4>[ 7.206660] HEADSET: Turn off micbias power
- <4>[ 7.206740] HEADSET: Config LineOut detection gpio
- <7>[ 7.206871] gpio_request: gpio-179 (lineout_int) status -16
- <6>[ 7.206944] headset_init- #####
- <6>[ 7.207016] ALSA device list:
- <6>[ 7.207146] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
- <6>[ 7.207218] #1: tegra-rt5640
- <6>[ 7.207516] oprofile: using arm/armv7-ca9
- <6>[ 7.207757] GACT probability NOT on
- <6>[ 7.207836] Mirror/redirect action on
- <6>[ 7.207906] u32 classifier
- <6>[ 7.208031] Actions configured
- <6>[ 7.208103] Netfilter messages via NETLINK v0.30.
- <6>[ 7.208236] nf_conntrack version 0.5.0 (15582 buckets, 62328 max)
- <6>[ 7.208623] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 7.208731] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 7.208862] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 7.209206] xt_time: kernel timezone is -0000
- <6>[ 7.209486] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 7.209731] arp_tables: (C) 2002 David S. Miller
- <6>[ 7.209901] TCP cubic registered
- <6>[ 7.210083] NET: Registered protocol family 10
- <6>[ 7.210814] Mobile IPv6
- <6>[ 7.210975] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 7.211192] IPv6 over IPv4 tunneling driver
- <6>[ 7.212018] NET: Registered protocol family 17
- <6>[ 7.212171] NET: Registered protocol family 15
- <6>[ 7.212354] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 7.212497] Bluetooth: RFCOMM socket layer initialized
- <6>[ 7.212570] Bluetooth: RFCOMM ver 1.11
- <6>[ 7.212642] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 7.212771] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 7.212988] NET: Registered protocol family 37
- <6>[ 7.213120] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <5>[ 7.213287] Registering SWP/SWPB emulation handler
- <4>[ 7.220973] Do not disable PWM clock when kernel inits
- <4>[ 7.221061] Disabling clocks left on by bootloader:
- <4>[ 7.221190] fuse_burn
- <4>[ 7.221268] cclk_lp
- <4>[ 7.221340] pll_x_out0
- <4>[ 7.221412] pll_d2_out0
- <4>[ 7.221539] pll_d_out0
- <4>[ 7.221610] pll_p_out2
- <4>[ 7.221683] pll_c_out1
- <4>[ 7.221756] pll_m_out1
- <6>[ 7.221983] CPU rate: 1000 MHz
- <3>[ 7.222095] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
- <4>[ 7.222607] tegra3_dvfs: minimum cap.cbus rate 228000000 requires 1000 mV
- <6>[ 7.222802] tegra dvfs: tegra sysfs cap interface is initialized
- <6>[ 7.223146] tegra_actmon.emc: Completed initialization (0)
- <6>[ 7.223429] tegra_actmon.avp: Completed initialization (0)
- <4>[ 7.224390] regulator_init_complete: fixed_reg_cdc_en: incomplete constraints, leaving on
- <4>[ 7.224534] regulator_init_complete: max77663_ldo8: incomplete constraints, leaving on
- <4>[ 7.224667] regulator_init_complete: max77663_ldo4: incomplete constraints, leaving on
- <4>[ 7.224965] ## wifi_probe
- <4>[ 7.225039] wifi_set_power = 1
- <3>[ 7.225110] Powering on wifi
- <4>[ 7.525506] wifi_set_carddetect = 1
- <4>[ 7.526913]
- <4>[ 7.526916] Dongle Host Driver, version 5.90.195.75
- <4>[ 7.526920] Compiled in drivers/net/wireless/bcmdhd on Jun 18 2012 at 15:56:14
- <6>[ 7.580624] mmc1: new high speed SDIO card at address 0001
- <4>[ 7.581432] F1 signature read @0x18000000=0x16044330
- <4>[ 7.585027] DHD: dongle ram size is set to 294912(orig 294912)
- <4>[ 7.585675] wl_create_event_handler thr:6a started
- <4>[ 7.586464] p2p0: P2P Interface Registered
- <4>[ 7.586611] dhd_attach thr:6b started
- <4>[ 7.586787] dhd_attach thr:6c started
- <4>[ 7.586978] dhd_attach thr:6d started
- <4>[ 7.587187] wifi_get_mac_addr
- <4>[ 7.587692] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- <6>[ 7.587847] [mmc]:mmc_rescan_try_freq:1892 mmc1: sdio completed
- <4>[ 7.587993] wifi_set_power = 0
- <3>[ 7.588065] Powering off wifi
- <4>[ 7.888438] =========== WLAN placed in RESET ========
- <6>[ 7.888602] Wake24 for irq=392
- <6>[ 7.888999] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
- <6>[ 7.889164] gpio_keys: Released KEY_POWER
- <6>[ 7.889298] gpio_keys: Released KEY_VOLUMEUP
- <6>[ 7.889371] gpio_keys: Released KEY_VOLUMEDOWN
- <6>[ 7.904038] max77663-rtc max77663-rtc.0: setting system clock to 2012-06-30 14:35:16 UTC (1341066916)
- <4>[ 7.904286] Warning: unable to open an initial console.
- <6>[ 7.904598] Freeing init memory: 272K
- <4>[ 7.908450] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <5>[ 7.914061] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 7.914714] bq27541_get_psp voltage_now= 3784 mV
- <5>[ 7.915412] bq27541_get_capacity = 36% ret= 40
- <5>[ 7.916057] bq27541_get_psp temperature= 236 (0.1「XC)
- <6>[ 7.969773] keychord: using input dev gpio-keys for fevent
- <6>[ 8.401523] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- <6>[ 8.438725] EXT4-fs (mmcblk0p4): recovery complete
- <6>[ 8.442125] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
- <6>[ 12.679265] EXT4-fs (mmcblk0p9): recovery complete
- <6>[ 12.682835] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
- <6>[ 12.709403] cpufreq_interactive_input_connect: connect to elan-touchscreen
- <3>[ 13.122015] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
- <3>[ 13.210198] init: cannot find '/system/bin/rm_ts_server', disabling 'rm_ts_service'
- <6>[ 13.210938] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 13.211400] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 13.216393] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 13.216952] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 13.231617] Tegra auto-hotplug enabled
- <6>[ 13.232812] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <6>[ 13.233124] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <6>[ 13.237920] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <6>[ 13.238222] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <4>[ 13.242686] [ektf3k]:[ELAN]into elan_iap_open
- <4>[ 13.326746] cpu_down(1)+
- <4>[ 13.328380] stop_machine_cpu_stop smp=0
- <4>[ 13.328403] stop_machine_cpu_stop smp=1
- <4>[ 13.328423] stop_machine_cpu_stop smp=2
- <4>[ 13.328443] stop_machine_cpu_stop smp=3
- <5>[ 13.330636] CPU1: shutdown
- <4>[ 13.332586] cpu_down(1)-
- <3>[ 13.349593] android_usb: already disabled
- <6>[ 13.359402] warning: `adbd' uses 32-bit capabilities (legacy support in use)
- <6>[ 13.360920] adb_open
- <6>[ 13.361247] adb_open(adbd)
- <6>[ 13.361479] mtp_bind_config
- <6>[ 13.362008] adb_bind_config
- <4>[ 13.366603] [ektf3k]:Update touch firmware with the file path:/system/etc/firmware/touch_fw.ekt
- <4>[ 13.448207] [ektf3k]:The firmware was version 0xB011 and id:0x3021
- <4>[ 13.448425] [ektf3k]:No need to update firmware
- <6>[ 13.495219] android_work: did not send uevent (0 0 (null))
- <6>[ 13.582688] android_work: did not send uevent (0 0 (null))
- <6>[ 13.600132] TF : INFO 00000002 14:35:14.536 P-0005 T-0010 TL OTF --------- SDrvCreate
- <6>[ 13.600602] TF : INFO 00000003 14:35:14.537 P-0009 T-0018 NV RSA --------- SDrvCreate
- <6>[ 13.607782] TF : INFO 00000004 14:35:14.544 ------ ------ --------------- Booted
- <6>[ 13.693953] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 13.714709] set_config : usb set config wake lock ++
- <6>[ 13.714854] android_usb gadget: high speed config #1: android
- <6>[ 13.715207] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 14.346789] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
- <6>[ 14.347170] The USB cable is connected
- <4>[ 15.336726] cpu_down(2)+
- <6>[ 15.346944] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- <4>[ 15.348030] stop_machine_cpu_stop smp=0
- <4>[ 15.348039] stop_machine_cpu_stop smp=2
- <4>[ 15.348048] stop_machine_cpu_stop smp=3
- <5>[ 15.349159] CPU2: shutdown
- <4>[ 15.350260] cpu_down(2)-
- <6>[ 15.368974] nvavp nvavp: read firmware from 'nvavp_os_0ff00000.bin' (15572 bytes)
- <6>[ 15.392031] nvavp nvavp: entry=00000094 control=00004aa0 debug=000052a0 size=15548
- <6>[ 15.392828] nvavp nvavp: AVP os at vaddr=f0e00000 paddr=ff00000 reset_addr=0ff00094
- <6>[ 15.424500] nvavp nvavp: read ucode firmware from 'nvavp_vid_ucode_alt.bin' (26832 bytes)
- <6>[ 15.444785] widget AIF3RX AIF3 Playback
- <6>[ 15.445256] widget AIF3TX AIF3 Capture
- <6>[ 15.492150] widget AIF3RX AIF3 Playback
- <6>[ 15.492428] widget AIF3TX AIF3 Capture
- <4>[ 15.540987] cpu_up(1)+
- <4>[ 15.564678] CPU1: Booted secondary processor
- <4>[ 15.565598] cpu_up(1)-
- <6>[ 15.566674] Switched to NOHz mode on CPU #1
- <6>[ 20.294247] iio-buffer, current state requested again
- <6>[ 20.298285] iio-buffer, current state requested again
- <6>[ 20.299674] iio-buffer, current state requested again
- <6>[ 20.376777] iio-buffer, current state requested again
- <4>[ 20.536680] cpu_down(1)+
- <4>[ 20.547876] stop_machine_cpu_stop smp=0
- <4>[ 20.547890] stop_machine_cpu_stop smp=3
- <4>[ 20.547905] stop_machine_cpu_stop smp=1
- <5>[ 20.549505] CPU1: shutdown
- <4>[ 20.550965] cpu_down(1)-
- <4>[ 25.136737] cpu_down(3)+
- <4>[ 25.148406] stop_machine_cpu_stop smp=0
- <4>[ 25.148426] stop_machine_cpu_stop smp=3
- <5>[ 25.150436] CPU3: shutdown
- <4>[ 25.152878] cpu_down(3)-
- <5>[ 25.677400] bq27541_get_capacity = 36% ret= 40
- <5>[ 25.678101] bq27541_get_psp voltage_now= 3784 mV
- <5>[ 25.678793] bq27541_get_psp temperature= 236 (0.1「XC)
- <5>[ 25.679542] bq27541_get_psp status: Charging ret= 0x0101
- <6>[ 25.780494] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- <6>[ 25.780745] nvavp nvavp: AVP os at vaddr=f0e00000 paddr=ff00000 reset_addr=0ff00094
- <6>[ 26.360946] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 26.361515] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 26.364186] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 26.370346] tegra_uart tegra_uart.2: Setting clk_src pll_p
- <6>[ 26.636489] acc_open
- <6>[ 26.636565] acc_release
- <6>[ 26.663208] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 26.702208] tegra_uart tegra_uart.2: Setting clk_src pll_p
- <6>[ 26.776813] Wake7 for irq=390
- <6>[ 26.776882] Enabling wake7
- <4>[ 26.926043]
- <4>[ 26.926049] Dongle Host Driver, version 5.90.195.75
- <4>[ 26.926052] Compiled in drivers/net/wireless/bcmdhd on Jun 18 2012 at 15:56:14
- <4>[ 26.926327] wl_android_wifi_on in
- <4>[ 26.926387] wifi_set_power = 1
- <3>[ 26.926543] Powering on wifi
- <4>[ 27.127947] al3010 debug log : light sensor chip is resumed
- <4>[ 27.136676] cpu_up(1)+
- <7>[ 27.166651] tegra CPU: force EDP limit 1200000 kHz
- <4>[ 27.167200] CPU1: Booted secondary processor
- <6>[ 27.176669] Switched to NOHz mode on CPU #1
- <4>[ 27.183283] cpu_up(1)-
- <4>[ 27.236707] cpu_up(2)+
- <4>[ 27.270391] CPU2: Booted secondary processor
- <4>[ 27.271989] cpu_up(2)-
- <6>[ 27.276672] Switched to NOHz mode on CPU #2
- <4>[ 27.306237] =========== WLAN going back to live ========
- <4>[ 27.306325] sdio_reset_comm():
- <4>[ 27.336722] cpu_up(3)+
- <4>[ 27.357286] CPU3: Booted secondary processor
- <4>[ 27.358238] cpu_up(3)-
- <4>[ 27.359677] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- <6>[ 27.366699] Switched to NOHz mode on CPU #3
- <6>[ 27.484225] Wake32 for irq=340
- <6>[ 27.484416] Wake32 for irq=340
- <6>[ 27.484537] Enabling wake32
- <6>[ 27.484604] gpio bank wake found: wake32 for irq=67
- <6>[ 27.484678] Enabling wake32
- <4>[ 27.486429] wifi_get_mac_addr
- <4>[ 27.488905] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=10:bf:48:ca:d5:ad
- <4>[ 27.495620] Firmware version = wl0: May 3 2012 18:21:53 version 5.90.195.61 FWID 01-672bd369
- <4>[ 27.497594] p2p0: p2p_dev_addr=12:bf:48:ca:d5:ad
- <4>[ 27.591452] dhd_rx_frame: net device is NOT registered yet. drop packet
- <4>[ 27.591665] dhd_rx_frame: net device is NOT registered yet. drop packet
- <6>[ 28.011675] mtp_open
- <6>[ 28.672628] pn544_dev_ioctl power on
- <6>[ 28.777481] pn544_dev_ioctl power off
- <6>[ 28.886848] pn544_dev_ioctl power on
- <3>[ 31.355315] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
- <4>[ 32.566743] cpu_down(2)+
- <4>[ 32.567433] stop_machine_cpu_stop smp=1
- <4>[ 32.567440] stop_machine_cpu_stop smp=2
- <4>[ 32.567445] stop_machine_cpu_stop smp=0
- <4>[ 32.567452] stop_machine_cpu_stop smp=3
- <5>[ 32.570515] CPU2: shutdown
- <4>[ 32.573077] cpu_down(2)-
- <4>[ 32.666778] cpu_up(2)+
- <4>[ 32.680311] CPU2: Booted secondary processor
- <4>[ 32.681138] cpu_up(2)-
- <6>[ 32.686691] Switched to NOHz mode on CPU #2
- <6>[ 32.930794] TF : INFO 00000005 14:35:33.867 P-0023 T-0027 SampleService -- SRVXCreate Enter
- <6>[ 32.931237] TF : INFO 00000006 14:35:33.868 P-0023 T-0027 SampleService -- getWrappingKey Enter
- <6>[ 32.931524] TF : INFO 00000007 14:35:33.868 P-0001 T-000D System --------- Mounting partition 0...
- <6>[ 32.998855] TF : INFO 00000008 14:35:33.935 P-0001 T-000D System --------- File system mounted successfully in partition 0
- <6>[ 32.999514] TF : INFO 00000009 14:35:33.936 P-0023 T-0027 SampleService -- getWrappingKey Exit
- <6>[ 32.999653] TF : INFO 00000010 14:35:33.936 P-0023 T-0027 SampleService -- dataUnwrap Enter
- <6>[ 33.001764] TF : INFO 00000011 14:35:33.938 P-0023 T-0027 SampleService -- dataUnwrap Exit
- <6>[ 33.002872] TF : INFO 00000012 14:35:33.939 P-0023 T-0027 SampleService -- SRVXCreate Exit
- <6>[ 33.003122] TF : INFO 00000013 14:35:33.940 P-0023 T-0027 SampleService -- SRVXOpenClientSession
- <6>[ 33.003881] TF : INFO 00000014 14:35:33.940 P-0023 T-0027 SampleService -- IsKeyBoxValid:Enter
- <6>[ 33.004091] TF : INFO 00000015 14:35:33.941 P-0023 T-0027 SampleService -- IsKeyBoxValid:Exit
- <6>[ 33.004443] TF : INFO 00000016 14:35:33.941 P-0023 T-0027 SampleService -- IsKeyBoxValid:Enter
- <6>[ 33.004615] TF : INFO 00000017 14:35:33.941 P-0023 T-0027 SampleService -- IsKeyBoxValid:Exit
- <6>[ 33.006217] TF : INFO 00000018 14:35:33.943 P-0023 T-0027 SampleService -- GetKeyData:Enter
- <6>[ 33.007112] TF : INFO 00000019 14:35:33.944 P-0023 T-0027 SampleService -- GetKeyData:Enter
- <6>[ 33.007253] TF : INFO 00000020 14:35:33.944 P-0023 T-0027 SampleService -- GetKeyData:Exit
- <6>[ 33.008132] TF : INFO 00000021 14:35:33.945 P-0023 T-0027 SampleService -- GetDeviceID:Enter
- <6>[ 33.008380] TF : INFO 00000022 14:35:33.945 P-0023 T-0027 SampleService -- GetDeviceID:[GTOUGVMKUCYCBK7F3N2JTVKVVE]
- <6>[ 33.008603] TF : INFO 00000023 14:35:33.945 P-0023 T-0027 SampleService -- GetDeviceID:Exit
- <4>[ 34.806704] cpu_down(1)+
- <4>[ 34.817326] stop_machine_cpu_stop smp=0
- <4>[ 34.817333] stop_machine_cpu_stop smp=3
- <4>[ 34.817339] stop_machine_cpu_stop smp=2
- <4>[ 34.817346] stop_machine_cpu_stop smp=1
- <5>[ 34.818206] CPU1: shutdown
- <4>[ 34.819155] cpu_down(1)-
- <4>[ 35.306714] cpu_up(1)+
- <4>[ 35.313592] CPU1: Booted secondary processor
- <4>[ 35.314328] cpu_up(1)-
- <6>[ 35.316692] Switched to NOHz mode on CPU #1
- <4>[ 37.816728] cpu_down(1)+
- <4>[ 37.818347] stop_machine_cpu_stop smp=0
- <4>[ 37.818370] stop_machine_cpu_stop smp=1
- <4>[ 37.818391] stop_machine_cpu_stop smp=2
- <4>[ 37.818409] stop_machine_cpu_stop smp=3
- <5>[ 37.820967] CPU1: shutdown
- <4>[ 37.824107] cpu_down(1)-
- <7>[ 37.976711] p2p0: no IPv6 routers present
- <4>[ 39.816743] cpu_down(3)+
- <4>[ 39.817307] stop_machine_cpu_stop smp=0
- <4>[ 39.817314] stop_machine_cpu_stop smp=2
- <4>[ 39.817319] stop_machine_cpu_stop smp=3
- <5>[ 39.818094] CPU3: shutdown
- <4>[ 39.819985] cpu_down(3)-
- <4>[ 42.016791] cpu_down(2)+
- <4>[ 42.019031] stop_machine_cpu_stop smp=0
- <4>[ 42.019056] stop_machine_cpu_stop smp=2
- <5>[ 42.025365] CPU2: shutdown
- <4>[ 42.028566] cpu_down(2)-
- <4>[ 47.176699] cpu_up(1)+
- <4>[ 47.199510] CPU1: Booted secondary processor
- <4>[ 47.203098] cpu_up(1)-
- <6>[ 47.206765] Switched to NOHz mode on CPU #1
- <4>[ 49.476782] cpu_down(1)+
- <4>[ 49.489117] stop_machine_cpu_stop smp=0
- <4>[ 49.489137] stop_machine_cpu_stop smp=1
- <5>[ 49.492049] CPU1: shutdown
- <4>[ 49.496289] cpu_down(1)-
- <4>[ 51.476701] cpu_up(1)+
- <4>[ 51.498987] CPU1: Booted secondary processor
- <4>[ 51.499541] cpu_up(1)-
- <6>[ 51.506657] Switched to NOHz mode on CPU #1
- <4>[ 53.576746] cpu_down(1)+
- <4>[ 53.578602] stop_machine_cpu_stop smp=0
- <4>[ 53.578624] stop_machine_cpu_stop smp=1
- <5>[ 53.581805] CPU1: shutdown
- <4>[ 53.585484] cpu_down(1)-
- <5>[ 67.039586] bq27541_get_psp status: Charging ret= 0x0100
- <5>[ 67.041850] bq27541_get_psp voltage_now= 3802 mV
- <5>[ 67.043497] bq27541_get_capacity = 36% ret= 40
- <5>[ 67.045136] bq27541_get_psp temperature= 237 (0.1「XC)
- <5>[ 67.059164] bq27541_get_capacity = 36% ret= 40
- <5>[ 67.060093] bq27541_get_psp voltage_now= 3802 mV
- <5>[ 67.061199] bq27541_get_psp temperature= 237 (0.1「XC)
- <5>[ 67.062124] bq27541_get_psp status: Charging ret= 0x0100
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement