SHARE
TWEET

Untitled

a guest May 10th, 2014 210 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. #
  2. # This is the main Apache HTTP server configuration file.  It contains the
  3. # configuration directives that give the server its instructions.
  4. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
  5. # In particular, see
  6. # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
  7. # for a discussion of each configuration directive.
  8. #
  9. # Do NOT simply read the instructions in here without understanding
  10. # what they do.  They're here only as hints or reminders.  If you are unsure
  11. # consult the online docs. You have been warned.  
  12. #
  13. # Configuration and logfile names: If the filenames you specify for many
  14. # of the server's control files begin with "/" (or "drive:/" for Win32), the
  15. # server will use that explicit path.  If the filenames do *not* begin
  16. # with "/", the value of ServerRoot is prepended -- so 'log/access_log'
  17. # with ServerRoot set to '/www' will be interpreted by the
  18. # server as '/www/log/access_log', where as '/log/access_log' will be
  19. # interpreted as '/log/access_log'.
  20.  
  21. #
  22. # ServerRoot: The top of the directory tree under which the server's
  23. # configuration, error, and log files are kept.
  24. #
  25. # Do not add a slash at the end of the directory path.  If you point
  26. # ServerRoot at a non-local disk, be sure to point the LockFile directive
  27. # at a local disk.  If you wish to share the same ServerRoot for multiple
  28. # httpd daemons, you will need to change at least LockFile and PidFile.
  29. #
  30. ServerRoot "/etc/httpd"
  31.  
  32. #
  33. # Listen: Allows you to bind Apache to specific IP addresses and/or
  34. # ports, instead of the default. See also the <VirtualHost>
  35. # directive.
  36. #
  37. # Change this to Listen on specific IP addresses as shown below to
  38. # prevent Apache from glomming onto all bound IP addresses.
  39. #
  40. #Listen 12.34.56.78:80
  41. Listen 80
  42.  
  43. #
  44. # Dynamic Shared Object (DSO) Support
  45. #
  46. # To be able to use the functionality of a module which was built as a DSO you
  47. # have to place corresponding `LoadModule' lines at this location so the
  48. # directives contained in it are actually available _before_ they are used.
  49. # Statically compiled modules (those listed by `httpd -l') do not need
  50. # to be loaded here.
  51. #
  52. # Example:
  53. # LoadModule foo_module modules/mod_foo.so
  54. #
  55. LoadModule authn_file_module modules/mod_authn_file.so
  56. LoadModule authn_dbm_module modules/mod_authn_dbm.so
  57. LoadModule authn_anon_module modules/mod_authn_anon.so
  58. LoadModule authn_dbd_module modules/mod_authn_dbd.so
  59. LoadModule authn_default_module modules/mod_authn_default.so
  60. LoadModule authz_host_module modules/mod_authz_host.so
  61. LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
  62. LoadModule authz_user_module modules/mod_authz_user.so
  63. LoadModule authz_dbm_module modules/mod_authz_dbm.so
  64. LoadModule authz_owner_module modules/mod_authz_owner.so
  65. LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  66. LoadModule authz_default_module modules/mod_authz_default.so
  67. LoadModule auth_basic_module modules/mod_auth_basic.so
  68. LoadModule auth_digest_module modules/mod_auth_digest.so
  69. LoadModule file_cache_module modules/mod_file_cache.so
  70. LoadModule cache_module modules/mod_cache.so
  71. LoadModule disk_cache_module modules/mod_disk_cache.so
  72. LoadModule mem_cache_module modules/mod_mem_cache.so
  73. LoadModule dbd_module modules/mod_dbd.so
  74. LoadModule dumpio_module modules/mod_dumpio.so
  75. LoadModule reqtimeout_module modules/mod_reqtimeout.so
  76. LoadModule ext_filter_module modules/mod_ext_filter.so
  77. LoadModule include_module modules/mod_include.so
  78. LoadModule filter_module modules/mod_filter.so
  79. LoadModule substitute_module modules/mod_substitute.so
  80. LoadModule deflate_module modules/mod_deflate.so
  81. LoadModule ldap_module modules/mod_ldap.so
  82. LoadModule log_config_module modules/mod_log_config.so
  83. LoadModule log_forensic_module modules/mod_log_forensic.so
  84. LoadModule logio_module modules/mod_logio.so
  85. LoadModule env_module modules/mod_env.so
  86. LoadModule mime_magic_module modules/mod_mime_magic.so
  87. LoadModule cern_meta_module modules/mod_cern_meta.so
  88. LoadModule expires_module modules/mod_expires.so
  89. LoadModule headers_module modules/mod_headers.so
  90. LoadModule ident_module modules/mod_ident.so
  91. LoadModule usertrack_module modules/mod_usertrack.so
  92. #LoadModule unique_id_module modules/mod_unique_id.so
  93. LoadModule setenvif_module modules/mod_setenvif.so
  94. LoadModule version_module modules/mod_version.so
  95. LoadModule proxy_module modules/mod_proxy.so
  96. LoadModule proxy_connect_module modules/mod_proxy_connect.so
  97. LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
  98. LoadModule proxy_http_module modules/mod_proxy_http.so
  99. LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  100. LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  101. LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
  102. LoadModule ssl_module modules/mod_ssl.so
  103. LoadModule mime_module modules/mod_mime.so
  104. LoadModule dav_module modules/mod_dav.so
  105. LoadModule status_module modules/mod_status.so
  106. LoadModule autoindex_module modules/mod_autoindex.so
  107. LoadModule asis_module modules/mod_asis.so
  108. LoadModule info_module modules/mod_info.so
  109. LoadModule suexec_module modules/mod_suexec.so
  110. LoadModule cgi_module modules/mod_cgi.so
  111. LoadModule cgid_module modules/mod_cgid.so
  112. LoadModule dav_fs_module modules/mod_dav_fs.so
  113. LoadModule vhost_alias_module modules/mod_vhost_alias.so
  114. LoadModule negotiation_module modules/mod_negotiation.so
  115. LoadModule dir_module modules/mod_dir.so
  116. LoadModule imagemap_module modules/mod_imagemap.so
  117. LoadModule actions_module modules/mod_actions.so
  118. LoadModule speling_module modules/mod_speling.so
  119. LoadModule userdir_module modules/mod_userdir.so
  120. LoadModule alias_module modules/mod_alias.so
  121. LoadModule rewrite_module modules/mod_rewrite.so
  122.  
  123. <IfModule !mpm_netware_module>
  124. <IfModule !mpm_winnt_module>
  125. #
  126. # If you wish httpd to run as a different user or group, you must run
  127. # httpd as root initially and it will switch.  
  128. #
  129. # User/Group: The name (or #number) of the user/group to run httpd as.
  130. # It is usually good practice to create a dedicated user and group for
  131. # running httpd, as with most system services.
  132. #
  133. User http
  134. Group http
  135.  
  136. </IfModule>
  137. </IfModule>
  138.  
  139. # 'Main' server configuration
  140. #
  141. # The directives in this section set up the values used by the 'main'
  142. # server, which responds to any requests that aren't handled by a
  143. # <VirtualHost> definition.  These values also provide defaults for
  144. # any <VirtualHost> containers you may define later in the file.
  145. #
  146. # All of these directives may appear inside <VirtualHost> containers,
  147. # in which case these default settings will be overridden for the
  148. # virtual host being defined.
  149. #
  150.  
  151. #
  152. # ServerAdmin: Your address, where problems with the server should be
  153. # e-mailed.  This address appears on some server-generated pages, such
  154. # as error documents.  e.g. admin@your-domain.com
  155. #
  156. ServerAdmin you@example.com
  157.  
  158. #
  159. # ServerName gives the name and port that the server uses to identify itself.
  160. # This can often be determined automatically, but we recommend you specify
  161. # it explicitly to prevent problems during startup.
  162. #
  163. # If your host doesn't have a registered DNS name, enter its IP address here.
  164. #
  165. #ServerName www.example.com:80
  166.  
  167. #
  168. # DocumentRoot: The directory out of which you will serve your
  169. # documents. By default, all requests are taken from this directory, but
  170. # symbolic links and aliases may be used to point to other locations.
  171. #
  172. DocumentRoot "/srv/http"
  173.  
  174. #
  175. # Each directory to which Apache has access can be configured with respect
  176. # to which services and features are allowed and/or disabled in that
  177. # directory (and its subdirectories).
  178. #
  179. # First, we configure the "default" to be a very restrictive set of
  180. # features.  
  181. #
  182. <Directory />
  183.     Options FollowSymLinks
  184.     AllowOverride None
  185.     Order deny,allow
  186.     Deny from all
  187. </Directory>
  188.  
  189. #
  190. # Note that from this point forward you must specifically allow
  191. # particular features to be enabled - so if something's not working as
  192. # you might expect, make sure that you have specifically enabled it
  193. # below.
  194. #
  195.  
  196. #
  197. # This should be changed to whatever you set DocumentRoot to.
  198. #
  199. <Directory "/srv/http">
  200.     #
  201.     # Possible values for the Options directive are "None", "All",
  202.     # or any combination of:
  203.     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  204.     #
  205.     # Note that "MultiViews" must be named *explicitly* --- "Options All"
  206.     # doesn't give it to you.
  207.     #
  208.     # The Options directive is both complicated and important.  Please see
  209.     # http://httpd.apache.org/docs/2.2/mod/core.html#options
  210.     # for more information.
  211.     #
  212.     Options Indexes FollowSymLinks
  213.  
  214.     #
  215.     # AllowOverride controls what directives may be placed in .htaccess files.
  216.     # It can be "All", "None", or any combination of the keywords:
  217.     #   Options FileInfo AuthConfig Limit
  218.     #
  219.     AllowOverride None
  220.  
  221.     #
  222.     # Controls who can get stuff from this server.
  223.     #
  224.     Order allow,deny
  225.     Allow from all
  226.  
  227. </Directory>
  228.  
  229. #
  230. # DirectoryIndex: sets the file that Apache will serve if a directory
  231. # is requested.
  232. #
  233. <IfModule dir_module>
  234.     DirectoryIndex index.html
  235. </IfModule>
  236.  
  237. #
  238. # The following lines prevent .htaccess and .htpasswd files from being
  239. # viewed by Web clients.
  240. #
  241. <FilesMatch "^\.ht">
  242.     Order allow,deny
  243.     Deny from all
  244.     Satisfy All
  245. </FilesMatch>
  246.  
  247. #
  248. # ErrorLog: The location of the error log file.
  249. # If you do not specify an ErrorLog directive within a <VirtualHost>
  250. # container, error messages relating to that virtual host will be
  251. # logged here.  If you *do* define an error logfile for a <VirtualHost>
  252. # container, that host's errors will be logged there and not here.
  253. #
  254. ErrorLog "/var/log/httpd/error_log"
  255.  
  256. #
  257. # LogLevel: Control the number of messages logged to the error_log.
  258. # Possible values include: debug, info, notice, warn, error, crit,
  259. # alert, emerg.
  260. #
  261. LogLevel warn
  262.  
  263. <IfModule log_config_module>
  264.     #
  265.     # The following directives define some format nicknames for use with
  266.     # a CustomLog directive (see below).
  267.     #
  268.     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
  269.     LogFormat "%h %l %u %t \"%r\" %>s %b" common
  270.  
  271.     <IfModule logio_module>
  272.       # You need to enable mod_logio.c to use %I and %O
  273.       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
  274.     </IfModule>
  275.  
  276.     #
  277.     # The location and format of the access logfile (Common Logfile Format).
  278.     # If you do not define any access logfiles within a <VirtualHost>
  279.     # container, they will be logged here.  Contrariwise, if you *do*
  280.     # define per-<VirtualHost> access logfiles, transactions will be
  281.     # logged therein and *not* in this file.
  282.     #
  283.     CustomLog "/var/log/httpd/access_log" common
  284.  
  285.     #
  286.     # If you prefer a logfile with access, agent, and referer information
  287.     # (Combined Logfile Format) you can use the following directive.
  288.     #
  289.     #CustomLog "/var/log/httpd/access_log" combined
  290. </IfModule>
  291.  
  292. <IfModule alias_module>
  293.     #
  294.     # Redirect: Allows you to tell clients about documents that used to
  295.     # exist in your server's namespace, but do not anymore. The client
  296.     # will make a new request for the document at its new location.
  297.     # Example:
  298.     # Redirect permanent /foo http://www.example.com/bar
  299.  
  300.     #
  301.     # Alias: Maps web paths into filesystem paths and is used to
  302.     # access content that does not live under the DocumentRoot.
  303.     # Example:
  304.     # Alias /webpath /full/filesystem/path
  305.     #
  306.     # If you include a trailing / on /webpath then the server will
  307.     # require it to be present in the URL.  You will also likely
  308.     # need to provide a <Directory> section to allow access to
  309.     # the filesystem path.
  310.  
  311.     #
  312.     # ScriptAlias: This controls which directories contain server scripts.
  313.     # ScriptAliases are essentially the same as Aliases, except that
  314.     # documents in the target directory are treated as applications and
  315.     # run by the server when requested rather than as documents sent to the
  316.     # client.  The same rules about trailing "/" apply to ScriptAlias
  317.     # directives as to Alias.
  318.     #
  319.     ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
  320.  
  321. </IfModule>
  322.  
  323. <IfModule cgid_module>
  324.     #
  325.     # ScriptSock: On threaded servers, designate the path to the UNIX
  326.     # socket used to communicate with the CGI daemon of mod_cgid.
  327.     #
  328.     #Scriptsock /run/httpd/cgisock
  329. </IfModule>
  330.  
  331. #
  332. # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
  333. # CGI directory exists, if you have that configured.
  334. #
  335. <Directory "/srv/http/cgi-bin">
  336.     AllowOverride None
  337.     Options None
  338.     Order allow,deny
  339.     Allow from all
  340. </Directory>
  341.  
  342. #
  343. # DefaultType: the default MIME type the server will use for a document
  344. # if it cannot otherwise determine one, such as from filename extensions.
  345. # If your server contains mostly text or HTML documents, "text/plain" is
  346. # a good value.  If most of your content is binary, such as applications
  347. # or images, you may want to use "application/octet-stream" instead to
  348. # keep browsers from trying to display binary files as though they are
  349. # text.
  350. #
  351. DefaultType text/plain
  352.  
  353. <IfModule mime_module>
  354.     #
  355.     # TypesConfig points to the file containing the list of mappings from
  356.     # filename extension to MIME-type.
  357.     #
  358.     TypesConfig conf/mime.types
  359.  
  360.     #
  361.     # AddType allows you to add to or override the MIME configuration
  362.     # file specified in TypesConfig for specific file types.
  363.     #
  364.     #AddType application/x-gzip .tgz
  365.     #
  366.     # AddEncoding allows you to have certain browsers uncompress
  367.     # information on the fly. Note: Not all browsers support this.
  368.     #
  369.     #AddEncoding x-compress .Z
  370.     #AddEncoding x-gzip .gz .tgz
  371.     #
  372.     # If the AddEncoding directives above are commented-out, then you
  373.     # probably should define those extensions to indicate media types:
  374.     #
  375.     AddType application/x-compress .Z
  376.     AddType application/x-gzip .gz .tgz
  377.  
  378.     #
  379.     # AddHandler allows you to map certain file extensions to "handlers":
  380.     # actions unrelated to filetype. These can be either built into the server
  381.     # or added with the Action directive (see below)
  382.     #
  383.     # To use CGI scripts outside of ScriptAliased directories:
  384.     # (You will also need to add "ExecCGI" to the "Options" directive.)
  385.     #
  386.     #AddHandler cgi-script .cgi
  387.  
  388.     # For type maps (negotiated resources):
  389.     #AddHandler type-map var
  390.  
  391.     #
  392.     # Filters allow you to process content before it is sent to the client.
  393.     #
  394.     # To parse .shtml files for server-side includes (SSI):
  395.     # (You will also need to add "Includes" to the "Options" directive.)
  396.     #
  397.     #AddType text/html .shtml
  398.     #AddOutputFilter INCLUDES .shtml
  399. </IfModule>
  400.  
  401. #
  402. # The mod_mime_magic module allows the server to use various hints from the
  403. # contents of the file itself to determine its type.  The MIMEMagicFile
  404. # directive tells the module where the hint definitions are located.
  405. #
  406. #MIMEMagicFile conf/magic
  407.  
  408. #
  409. # Customizable error responses come in three flavors:
  410. # 1) plain text 2) local redirects 3) external redirects
  411. #
  412. # Some examples:
  413. #ErrorDocument 500 "The server made a boo boo."
  414. #ErrorDocument 404 /missing.html
  415. #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
  416. #ErrorDocument 402 http://www.example.com/subscription_info.html
  417. #
  418.  
  419. #
  420. # MaxRanges: Maximum number of Ranges in a request before
  421. # returning the entire resource, or one of the special
  422. # values 'default', 'none' or 'unlimited'.
  423. # Default setting is to accept 200 Ranges.
  424. #MaxRanges unlimited
  425.  
  426. #
  427. # EnableMMAP and EnableSendfile: On systems that support it,
  428. # memory-mapping or the sendfile syscall is used to deliver
  429. # files.  This usually improves server performance, but must
  430. # be turned off when serving from networked-mounted
  431. # filesystems or if support for these functions is otherwise
  432. # broken on your system.
  433. #
  434. #EnableMMAP off
  435. #EnableSendfile off
  436.  
  437. # Supplemental configuration
  438. #
  439. # The configuration files in the conf/extra/ directory can be
  440. # included to add extra features or to modify the default configuration of
  441. # the server, or you may simply copy their contents here and change as
  442. # necessary.
  443.  
  444. # Server-pool management (MPM specific)
  445. #Include conf/extra/httpd-mpm.conf
  446.  
  447. # Multi-language error messages
  448. Include conf/extra/httpd-multilang-errordoc.conf
  449.  
  450. # Fancy directory listings
  451. Include conf/extra/httpd-autoindex.conf
  452.  
  453. # Language settings
  454. Include conf/extra/httpd-languages.conf
  455.  
  456. # User home directories
  457. Include conf/extra/httpd-userdir.conf
  458.  
  459. # Real-time info on requests and configuration
  460. #Include conf/extra/httpd-info.conf
  461.  
  462. # Virtual hosts
  463. #Include conf/extra/httpd-vhosts.conf
  464.  
  465. # Local access to the Apache HTTP Server Manual
  466. #Include conf/extra/httpd-manual.conf
  467.  
  468. # Distributed authoring and versioning (WebDAV)
  469. #Include conf/extra/httpd-dav.conf
  470.  
  471. # Various default settings
  472. Include conf/extra/httpd-default.conf
  473.  
  474. # Use for PHP 5.x:
  475. LoadModule php5_module       modules/libphp5.so
  476. AddHandler php5-script php
  477. Include conf/extra/php5_module.conf
  478.  
  479. # Secure (SSL/TLS) connections
  480. #Include conf/extra/httpd-ssl.conf
  481. #
  482. # Note: The following must must be present to support
  483. #       starting without SSL on platforms with no /dev/random equivalent
  484. #       but a statically compiled-in mod_ssl.
  485. #
  486. <IfModule ssl_module>
  487. SSLRandomSeed startup builtin
  488. SSLRandomSeed connect builtin
  489. </IfModule>
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top