[2019-03-19 18:03:24] [Output] : ★ Bashar M'Saraweq reaches inside his pocket as he takes out his gloves, sliding them on.
[2019-03-19 18:03:26] [Output] : * Bashar M'Saraweq slips a pair of Gloves onto their hands. *
[2019-03-19 18:03:44] [Output] : ★ Bashar M'Saraweq walks towards the lift as he presses the red button, lifting the car a little bit off the..
[2019-03-19 18:03:46] [Output] : ★ ground.      ((Bashar M'Saraweq))
[2019-03-19 18:04:02] [Output] : ★ Bashar M'Saraweq shakes the body to see if the car is stable, lifting it a bit more once done.
[2019-03-19 18:04:39] [Output] : ★ Bashar M'Saraweq walks towards the shelf as he reaches the socket box, taking out a 19mm socket out of..
[2019-03-19 18:04:57] [Output] : ★ it as he returns the box grabbing the impact gun as he slides the socket in it.      ((Bashar M'Saraweq))
[2019-03-19 18:05:14] [Output] : ★ Bashar M'Saraweq walks towards the car's front left tire as he leans over it, using the impact gun to..
[2019-03-19 18:05:43] [Output] : ★ unscrew the lugs from the wheel as he collects them inside of his pocket, leaving the..      ((Stefan Gocevski))
[2019-03-19 18:05:59] [Output] : ★ gun aside as he uses both of his hand to remove the wheel, placing it upder the lift.      ((Bashar M'Saraweq))
[2019-03-19 18:06:41] [Output] : ★ the wheel as he uses the impact gun to remove the lugs from the wheel, collecting them..      ((Bashar M'Saraweq))
[2019-03-19 18:06:51] [Output] : ★ inside of his pocket as he leaves the gun on the ground.      ((Bashar M'Saraweq))
[2019-03-19 18:07:14] [Output] : ★ Bashar M'Saraweq using both of his hands removes the wheel as he places it under the lift, stretching a bit.
[2019-03-19 18:08:01] [Output] : ★ Bashar M'Saraweq sits near the tire as he looks inside of it, nodding.
[2019-03-19 18:09:45] [Output] : ★ Bashar M'Saraweq de-attaches the brake lines from the OEM as well as all the hardware attached to it..
[2019-03-19 18:09:48] [Output] : ★ as he places them aside.      ((Bashar M'Saraweq))
[2019-03-19 18:10:55] [Output] : ★ Bashar M'Saraweq grabs the impact gun as he uses it to remove the lugs from the lower bracket of the shock..
[2019-03-19 18:11:02] [Output] : ★ to the lower control arm.      ((Bashar M'Saraweq))
[2019-03-19 18:11:33] [Output] : ★ Bashar M'Saraweq after done disconnects the sway bar end link to disconnect one end of the suspension..
[2019-03-19 18:11:38] [Output] : ★ from the other.      ((Bashar M'Saraweq))
[2019-03-19 18:12:51] [Output] : ★ Bashar M'Saraweq after done loosens up the lugs from the top of the engine's bay to loosen the shock..
[2019-03-19 18:12:58] [Output] : ★ assembly from the vehicle.      ((Bashar M'Saraweq))
[2019-03-19 18:13:35] [Output] : ★ Stefan Gocevski makes sure the lugs are not removed as he makes sure that everything's clear.
[2019-03-19 18:14:01] [Output] : ★ Once is clear carefully removes the shock assembly from the vehicle as he tries to avoid..      ((Bashar M'Saraweq))
[2019-03-19 18:14:19] [Output] : ★ contact with any of the suspension or brake components.      ((Bashar M'Saraweq))
[2019-03-19 18:14:44] [Output] : ★ Bashar M'Saraweq makes sure he is supporting the suspension assembly as he removes the hardware.
[2019-03-19 18:15:31] [Output] : ★ Bashar M'Saraweq after done removing the original suspension compares it to the new suspension components.
[2019-03-19 18:16:15] [Output] : ★ Bashar M'Saraweq would start setting up the height of the new coilovers, making them a bit shorter then the...
[2019-03-19 18:16:18] [Output] : ★ orginal ones.      ((Bashar M'Saraweq))
[2019-03-19 18:17:13] [Output] : ★ Bashar M'Saraweq after done brings them to the wheel as he starts mounting them on it..
[2019-03-19 18:17:39] [Output] : ★ Bashar M'Saraweq lifts the damper kit trough the underside of the chassis into position where the studs go...
[2019-03-19 18:18:49] [Output] : ★ trough the OEM bolt-holders on the strut tower mount.      ((Bashar M'Saraweq))
[2019-03-19 18:19:47] [Output] : ★ Bashar M'Saraweq threads the nuts untill he sees at least 2 of the threads past the top of the nut from the..
[2019-03-19 18:20:10] [Output] : ★ stud on the damper kit, not tightening them.      ((Bashar M'Saraweq))
[2019-03-19 18:21:01] [Output] : ★ Bashar M'Saraweq using them OEM hardware replaces the lower mounting hardware into the lower bracklet..
[2019-03-19 18:21:18] [Output] : ★ as he hand tightens them.      ((Bashar M'Saraweq))
[2019-03-19 18:22:19] [Output] : ★ Bashar M'Saraweq after done re-attaches the prevously de-attached brake lines to the OEM shock body.
[2019-03-19 18:22:29] [Output] : ★ Reuses the OEM hardware to do so.      ((Bashar M'Saraweq))
[2019-03-19 18:22:59] [Output] : ★ Bashar M'Saraweq torques the top nots on the top of the damper assembly to the OEM torgue specifications as..
[2019-03-19 18:23:40] [Output] : ★ he torques the lower hardware at the bottom of the damper to OEM torque specifications as..      ((Bashar M'Saraweq))
[2019-03-19 18:23:41] [Output] : ★ well.      ((Bashar M'Saraweq))
[2019-03-19 18:30:41] [Output] : ★ Bashar M'Saraweq walks towards the tires as he grabs one of the new tires, rolling it to the right..
[2019-03-19 18:31:04] [Output] : ★ a side of the car where the front right wheel needs to sit as he slides it inside, grabbing..      ((Bashar M'Saraweq))
[2019-03-19 18:31:20] [Output] : ★ the impact gun as well as some lugs, tightening them up first by hand..      ((Bashar M'Saraweq))
[2019-03-19 18:31:38] [Output] : ★ as he screws them in tightly using the impact gun doing a star pattern.      ((Bashar M'Saraweq))
[2019-03-19 18:35:53] [Output] : ★ Bashar M'Saraweq after done walks towards the front left tire as he sits near it.
[2019-03-19 18:36:25] [Output] : ★ Bashar M'Saraweq removes the break lines from it as well as any hardware attached to the OEM shock assembly..
[2019-03-19 18:36:40] [Output] : ★ as he saves all the parts he removes.      ((Bashar M'Saraweq))
[2019-03-19 18:37:10] [Output] : ★ Bashar M'Saraweq after done removes the lugs that mount the lower bracklet of the shock to the lower controlm
[2019-03-19 18:37:15] [Output] : ★ control arm.      ((Bashar M'Saraweq))
[2019-03-19 18:37:33] [Output] : ★ Bashar M'Saraweq after done disconnects the sway bar end link to disconnect one end of the suspension..
[2019-03-19 18:37:53] [Output] : ★ from the other to avoid any pre load.      ((Bashar M'Saraweq))
[2019-03-19 18:38:14] [Output] : ★ Bashar M'Saraweq loosens the nuts from the top of the engine bay to loosen the shock assembly from the..
[2019-03-19 18:38:16] [Output] : ★ vehicle.      ((Bashar M'Saraweq))
[2019-03-19 18:38:56] [Output] : ★ Bashar M'Saraweq makes sure the lugs are not removed, as he makes sure there's clearance to remove the..
[2019-03-19 18:39:27] [Output] : ★ shpcl assembly from the vehicle as he watches there are no break lines affixed to the..      ((Bashar M'Saraweq))
[2019-03-19 18:39:30] [Output] : ★ shock assembly.      ((Bashar M'Saraweq))
[2019-03-19 18:39:57] [Output] : ★ Stefan Gocevski once is clear he removes the shock assembly from the vehicle, avoiding any contact..
[2019-03-19 18:40:16] [Output] : ★ with any of the suspension or brake components.      ((Bashar M'Saraweq))
[2019-03-19 18:40:35] [Output] : ★ Bashar M'Saraweq makes sure he is supporting the suspension assembly as he removes the hardware.
[2019-03-19 18:41:14] [Output] : ★ Bashar M'Saraweq after done measures the lenght of the orginal suspension to the coilover, as he..
[2019-03-19 18:41:31] [Output] : ★ compares them both, and setting the height of the new coilover a bit lower then the orginal      ((Bashar M'Saraweq))
[2019-03-19 18:41:33] [Output] : ★ one.      ((Bashar M'Saraweq))
[2019-03-19 18:42:07] [Output] : ★ Bashar M'Saraweq after done he starts mounting it to the vehicle.
[2019-03-19 18:42:33] [Output] : ★ Bashar M'Saraweq lifts the damper kit trough the underside of the chassis into position where the studs go..
[2019-03-19 18:42:56] [Output] : ★ trough the OEM bolt-holes on the strut tower mount.      ((Bashar M'Saraweq))
[2019-03-19 18:43:18] [Output] : ★ Stefan Gocevski threads the nuths untill he sees at least 2 of them to pass the top of the nut from the stud
[2019-03-19 18:43:33] [Output] : ★ on the damper kit but making sure he's not tightening them.      ((Bashar M'Saraweq))
[2019-03-19 18:44:33] [Output] : ★ Bashar M'Saraweq after that slowly pulls down the hub assembly .
[2019-03-19 18:44:58] [Output] : ★ Bashar M'Saraweq using the OEM hardware he replaces the lower mounting hardware into the lower bracklet and..
[2019-03-19 18:45:03] [Output] : ★ hand tightens them.      ((Bashar M'Saraweq))
[2019-03-19 18:45:24] [Output] : ★ Bashar M'Saraweq after that mounts all the losen brake lines he de-attached prevously.
[2019-03-19 18:45:36] [Output] : ★ Bashar M'Saraweq re-uses the OEM hardware to do so.
[2019-03-19 18:46:17] [Output] : ★ Bashar M'Saraweq after done he tights the lugs on top of the dumper assembly tp the OEM torque.
[2019-03-19 18:47:01] [Output] : ★ specification amd then torques the lower hardware at the bottom of the damper.      ((Bashar M'Saraweq))
[2019-03-19 18:47:21] [Output] : ★ Bashar M'Saraweq upon done walks towards the new wheel as he takes it, sliding it into position..
[2019-03-19 18:47:40] [Output] : ★ after he grabs the lugs out of his pocket, hand-tightening them into position upon..      ((Bashar M'Saraweq))
[2019-03-19 18:47:52] [Output] : ★ tightening them with the impact gun doing a start pattern.      ((Bashar M'Saraweq))
[2019-03-19 18:49:24] [Output] : ★ Bashar M'Saraweq after done with the front wheels moves towards the rear left wheel as he uses the..
[2019-03-19 18:49:38] [Output] : ★ impact gun to unscrew the bolts as he collects them inside his pocket, removing the..      ((Bashar M'Saraweq))
[2019-03-19 18:49:44] [Output] : ★ tire as he places it under the lift.      ((Bashar M'Saraweq))
[2019-03-19 18:50:22] [Output] : ★ Bashar M'Saraweq after done de-attaches the brake lines and other hardware attached to the OEM shock assembly