API tools faq
paste
Advertisement
etnguyen03

Untitled

etnguyen03
May 5th, 2019
242
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.56 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.11-arch1-1-ARCH] (local build)
  2. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Desktop HDD.15
  6. Device Model: ST4000DM001-1FK17N
  7. Serial Number: W4J1XB0F
  8. LU WWN Device Id: 5 000c50 09e4b9e79
  9. Firmware Version: CC49
  10. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5980 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  15. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Sun May 5 22:33:44 2019 EDT
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x00) Offline data collection activity
  25. was never started.
  26. Auto Offline Data Collection: Disabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 106) seconds.
  32. Offline data collection
  33. capabilities: (0x73) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. No Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 514) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x3035) SCT Status supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000f 119 096 006 Pre-fail Always - 219779120
  60. 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
  61. 4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5701
  62. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000f 070 053 030 Pre-fail Always - 90415830459
  64. 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7049
  65. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 596
  67. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  68. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  69. 187 Reported_Uncorrect 0x0032 032 032 000 Old_age Always - 68
  70. 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 3 3 3
  71. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 139
  72. 190 Airflow_Temperature_Cel 0x0022 071 048 045 Old_age Always - 29 (Min/Max 26/29)
  73. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  74. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 416
  75. 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 6592
  76. 194 Temperature_Celsius 0x0022 029 052 000 Old_age Always - 29 (0 19 0 0 0)
  77. 195 Hardware_ECC_Recovered 0x001a 119 100 000 Old_age Always - 219779120
  78. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  79. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1360h+29m+08.340s
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 49270043487
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 140629786717
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 68 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 68 occurred at disk power-on lifetime: 6989 hours (291 days + 5 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. 60 00 00 ff ff ff 4f 00 14:46:25.405 READ FPDMA QUEUED
  113. 60 00 00 ff ff ff 4f 00 14:46:25.403 READ FPDMA QUEUED
  114. 60 00 00 ff ff ff 4f 00 14:46:25.378 READ FPDMA QUEUED
  115. 60 00 00 ff ff ff 4f 00 14:46:25.338 READ FPDMA QUEUED
  116. 60 00 00 ff ff ff 4f 00 14:46:25.333 READ FPDMA QUEUED
  117.  
  118. Error 67 occurred at disk power-on lifetime: 6957 hours (289 days + 21 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. 60 00 08 ff ff ff 4f 00 00:06:53.998 READ FPDMA QUEUED
  130. 60 00 08 ff ff ff 4f 00 00:06:53.998 READ FPDMA QUEUED
  131. 60 00 18 ff ff ff 4f 00 00:06:53.998 READ FPDMA QUEUED
  132. 60 00 08 ff ff ff 4f 00 00:06:53.998 READ FPDMA QUEUED
  133. 60 00 08 ff ff ff 4f 00 00:06:53.997 READ FPDMA QUEUED
  134.  
  135. Error 66 occurred at disk power-on lifetime: 6957 hours (289 days + 21 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 53 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. 61 00 18 ff ff ff 4f 00 00:06:53.557 WRITE FPDMA QUEUED
  147. 60 00 08 ff ff ff 4f 00 00:06:53.552 READ FPDMA QUEUED
  148. 60 00 08 ff ff ff 4f 00 00:06:53.537 READ FPDMA QUEUED
  149. 60 00 08 ff ff ff 4f 00 00:06:53.537 READ FPDMA QUEUED
  150. 60 00 c0 ff ff ff 4f 00 00:06:53.536 READ FPDMA QUEUED
  151.  
  152. Error 65 occurred at disk power-on lifetime: 6957 hours (289 days + 21 hours)
  153. When the command that caused the error occurred, the device was active or idle.
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. 60 00 08 ff ff ff 4f 00 15:08:41.291 READ FPDMA QUEUED
  164. 61 00 40 ff ff ff 4f 00 15:08:41.219 WRITE FPDMA QUEUED
  165. 61 00 40 ff ff ff 4f 00 15:08:41.218 WRITE FPDMA QUEUED
  166. 61 00 40 ff ff ff 4f 00 15:08:41.218 WRITE FPDMA QUEUED
  167. 61 00 40 ff ff ff 4f 00 15:08:41.218 WRITE FPDMA QUEUED
  168.  
  169. Error 64 occurred at disk power-on lifetime: 6957 hours (289 days + 21 hours)
  170. When the command that caused the error occurred, the device was active or idle.
  171.  
  172. After command completion occurred, registers were:
  173. ER ST SC SN CL CH DH
  174. -- -- -- -- -- -- --
  175. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  176.  
  177. Commands leading to the command that caused the error were:
  178. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  179. -- -- -- -- -- -- -- -- ---------------- --------------------
  180. 60 00 08 ff ff ff 4f 00 14:35:30.323 READ FPDMA QUEUED
  181. 60 00 08 30 d1 e3 41 00 14:35:30.304 READ FPDMA QUEUED
  182. 60 00 08 ff ff ff 4f 00 14:35:30.291 READ FPDMA QUEUED
  183. 60 00 08 ff ff ff 4f 00 14:35:30.282 READ FPDMA QUEUED
  184. 60 00 08 ff ff ff 4f 00 14:35:30.277 READ FPDMA QUEUED
  185.  
  186. SMART Self-test log structure revision number 1
  187. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  188. # 1 Short offline Completed without error 00% 7049 -
  189. # 2 Extended offline Completed without error 00% 7043 -
  190. # 3 Short offline Completed without error 00% 7035 -
  191. # 4 Short offline Completed: read failure 90% 6999 2968234928
  192. # 5 Short offline Completed without error 00% 6145 -
  193. 1 of 1 failed self-tests are outdated by newer successful extended offline self-test # 2
  194.  
  195. SMART Selective self-test log data structure revision number 1
  196. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  197. 1 0 0 Not_testing
  198. 2 0 0 Not_testing
  199. 3 0 0 Not_testing
  200. 4 0 0 Not_testing
  201. 5 0 0 Not_testing
  202. Selective self-test flags (0x0):
  203. After scanning selected spans, do NOT read-scan remainder of disk.
  204. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!