Legacy IOS Part5 End of script

    set_tool_paths

    if [[ $no_internet_check != 1 ]]; then
        log "Checking Internet connection..."
        local try=("google.com" "www.apple.com" "208.67.222.222")
        local check
        local timeout="-w3"
        [[ $platform == "macos" ]] && timeout="-t3"
        for i in "${try[@]}"; do
            ping -c1 $timeout $i | sed -n '1,2p'
            check=${PIPESTATUS[0]}
            if [[ $check == 0 ]]; then
                break
            fi
        done
        if [[ $check != 0 ]]; then
            error "Please check your Internet connection before proceeding."
        fi
    fi

    local checks=(curl git xxd)
    local check_fail
    for check in "${checks[@]}"; do
        if [[ $debug_mode == 1 ]]; then
            log "Checking for $check in PATH"
        fi
        if [[ ! $(command -v $check) ]]; then
            warn "$check not found in PATH"
            check_fail=1
        fi
    done
    if [[ -z $unzip2 || -z $zip2 ]]; then
        warn "unzip/zip not found in PATH"
        check_fail=1
    fi

    if [[ -s ../resources/firstrun ]]; then
        mv ../resources/firstrun ../saved/
    fi
    if [[ ! -s ../saved/firstrun || $(cat ../saved/firstrun) != "$platform_ver" || $check_fail == 1 ]]; then
        install_depends
    fi

    version_check

    device_get_info
    mkdir -p ../saved/baseband ../saved/$device_type ../saved/shsh

    mode=
    if [[ -n $main_argmode ]]; then
        mode="$main_argmode"
    else
        menu_main
    fi

    case $mode in
        "custom-ipsw" )
            ipsw_preference_set
            restore_deviceprepare
            ipsw_prepare
            log "Done creating custom IPSW"
        ;;
        "downgrade" )
            ipsw_preference_set
            restore_deviceprepare
            ipsw_prepare
            restore_prepare
        ;;
        "baseband" )
            device_dump baseband
            log "Baseband dumping is done"
            print "* To stitch baseband to IPSW, run Legacy iOS Kit with --disable-bbupdate flag:"
            print "    > ./restore.sh --disable-bbupdate"
        ;;
        "actrec" )
            device_dump activation
            log "Activation records dumping is done"
            print "* The output tar file contains the plist file(s) dumped. Activation record plist is all you need for activation"
            print "* Note: Using the activation records only works on iOS 9.2.1 or lower. It will not work on iOS 9.3+"
            if (( device_proc < 7 )); then
                print "* To stitch activation to IPSW, run Legacy iOS Kit with --activation-records flag:"
                print "    > ./restore.sh --activation-records"
            fi
        ;;
        "restore-update" ) restore_latest update;;
        "kdfu"         ) device_enter_mode kDFU;;
        "ramdisknvram" ) device_ramdisk clearnvram;;
        "pwned-ibss"   ) device_enter_mode pwnDFU;;
        "enterrecovery") device_enter_mode Recovery;;
        "exitrecovery" )
            log "Attempting to exit Recovery mode."
            $irecovery -n
            if [[ $device_proc != 1 && $device_type != "iPod2,1" ]] && (( device_proc < 7 )); then
                print "* Note: For tethered downgrades, you need to boot your device using the Just Boot option. Exiting recovery mode will not work."
            fi
            if [[ $device_canpowder == 1 ]]; then
                print "* Note 2: If your device is stuck in recovery mode, it may have been restored with powdersn0w before."
                print "    - If so, try to clear the device's NVRAM: go to Useful Utilities -> Clear NVRAM"
            fi
        ;;
        "customipsw"   ) restore_customipsw;;
        "getversion"   ) device_enter_ramdisk getversion;;
        "shutdown"     ) device_pair; $idevicediagnostics shutdown;;
        "restart"      ) device_pair; $idevicediagnostics restart;;
        "remove4"      ) device_ramdisk setnvram $rec;;
        "device_dfuhelper" )
            if [[ $device_proc == 1 ]]; then
                device_dfuhelper norec WTFreal
            else
                device_dfuhelper
            fi
        ;;
        "device"* | "shsh"* ) $mode;;
        * ) :;;
    esac
}

for i in "$@"; do
    case $i in
        # general options
        "--debug"           ) set -x; debug_mode=1; menu_old=1;;
        "--disable-usbmuxd" ) device_disable_usbmuxd=1;;
        "--enable-sudoloop" ) device_disable_sudoloop=;;
        "--help"            ) display_help; exit;;
        "--no-color"        ) no_color=1;;
        "--no-finder"       ) no_finder=1;;
        "--old-menu"        ) menu_old=1;;
        "--use-usbmuxd2"    ) use_usbmuxd2=1;;

        # options for 32-bit devices
        "--activation-records") device_actrec=1;;
        "--build-id="*      ) device_rd_build="${i#*=}";;
        "--bootargs="*      ) device_bootargs="${i#*=}";;
        "--dead-bb"         ) device_deadbb=1; device_disable_bbupdate=1;;
        "--disable-actrec"  ) device_disable_actrec=1;;
        "--disable-bbupdate") device_disable_bbupdate=1;;
        "--ipsw-hacktivate" ) ipsw_hacktivate=1;;
        "--ipsw-verbose"    ) ipsw_verbose=1;;
        "--jailbreak"       ) ipsw_jailbreak=1;;
        "--gasgauge-patch" | "--multipatch") ipsw_gasgauge_patch=1;;
        "--memory"          ) ipsw_memory=1;;
        "--pwned-recovery"  ) device_pwnrec=1;;
        "--ra1n-timeout="*  ) device_ra1n_timeout="${i#*=}";;
        "--skip-first"      ) ipsw_skip_first=1;;
        "--skip-ibss"       ) device_skip_ibss=1;;

        # options for 64-bit devices
        "--skip-blob"       ) restore_useskipblob=1;;
        "--use-dev"         ) restore_usedev=1;;
        "--use-pwndfu"      ) restore_usepwndfu64=1;;

        # device_argmode setters
        "--entry-device"    ) device_argmode="entry";;
        "--no-device"       ) device_argmode="none";;

        # entry parameters
        "--device="*        ) device_type="${i#*=}";;
        "--ecid="*          ) device_ecid="${i#*=}";;

        # main_argmode setters
        "--dfuhelper"       ) main_argmode="device_dfuhelper";;
        "--exit-recovery"   ) main_argmode="exitrecovery";;
        "--just-boot"       ) main_argmode="device_justboot";;
        "--kdfu"            ) main_argmode="kdfu";;
        "--pwn"             ) main_argmode="pwned-ibss";;
        "--sshrd"           ) main_argmode="device_enter_ramdisk";;
        "--sshrd-menu"      ) device_argmode="entry"; main_argmode="device_enter_ramdisk_menu";;

        # please dont use these, unless you know what youre doing
        "--no-internet-check") no_internet_check=1;;
        "--no-version-check" ) no_version_check=1;;
        "--run-as-root"      ) run_as_root=1;;
    esac
done

if [[ $no_color != 1 ]]; then
    TERM=xterm-256color # fix colors for msys2 terminal
    color_R=$(tput setaf 9)
    color_G=$(tput setaf 10)
    color_B=$(tput setaf 12)
    color_Y=$(tput setaf 208)
    color_N=$(tput sgr0)
fi

if [[ $main_argmode == "device_justboot" && -z $device_rd_build ]]; then
    print "* Just Boot usage: --just-boot --build-id=<id>"
    print "* Optional: --device=<type> --bootargs=\"<bootargs>\""
    print "* Example usage: ./restore.sh --just-boot --build-id=12H321"
    error "Just Boot (--just-boot) requires specifying build ID (--build-id=<id>)"
elif [[ $main_argmode == "device_justboot" && $device_type == "iPod4,1" && $device_rd_build == "11D257" ]]; then
    main_argmode="device_justboot_touch4ios7"
fi

trap "clean" EXIT
trap "exit 1" INT TERM

othertmp=$(ls "$(dirname "$0")" | grep -c tmp)
if [[ $othertmp != 0 ]]; then
    noclean=1
    log "Detected existing tmp folder(s)."
    print "* There might be other Legacy iOS Kit instance(s) running, or residual tmp folder(s) not deleted."
    print "* Running multiple instances is not fully supported and can cause unexpected behavior."
    print "* It is recommended to only use a single instance and/or delete all existing \"tmp\" folders in your Legacy iOS Kit folder before continuing."
    select_yesno "Select Y to remove all tmp folders, N to run as is" 1
    if [[ $? == 1 ]]; then
        noclean=
        rm -r "$(dirname "$0")/tmp"*
        clean
    fi
else
    clean
fi
othertmp=$(ls "$(dirname "$0")" | grep -c tmp)

mkdir -p "$(dirname "$0")/tmp$$"
pushd "$(dirname "$0")/tmp$$" >/dev/null
mkdir -p ../saved

main

popd >/dev/null