Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.237172] io scheduler cfq registered (default)
- [ 0.237282] io scheduler mq-deadline registered
- [ 0.237392] io scheduler kyber registered
- [ 0.242448] pcieport 0000:00:01.3: AER enabled with IRQ 26
- [ 0.243128] pcieport 0000:00:01.3: AER enabled with IRQ 26
- [ 0.243259] pcieport 0000:00:03.1: AER enabled with IRQ 27
- [ 0.243435] pcieport 0000:00:03.1: AER enabled with IRQ 27
- [ 0.243562] pcieport 0000:00:07.1: AER enabled with IRQ 28
- [ 0.244102] pcieport 0000:00:07.1: AER enabled with IRQ 28
- [ 0.244230] pcieport 0000:00:08.1: AER enabled with IRQ 30
- [ 0.244405] pcieport 0000:00:08.1: AER enabled with IRQ 30
- [ 0.244651] Non-volatile memory driver v1.3
- [ 0.244782] Linux agpgart interface v0.103
- [ 0.245143] nvidiafb: Device ID: 10de1380
- [ 0.245252] nvidiafb: unknown NV_ARCH
- [ 0.245415] uvesafb: failed to execute /sbin/v86d
- [ 0.245525] uvesafb: make sure that the v86d helper is installed and executable
- [ 0.245699] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
- [ 0.245814] uvesafb: vbe_init() failed with -22
- [ 0.245924] uvesafb: probe of uvesafb.0 failed with error -22
- [ 0.246060] vga16fb: initializing
- [ 0.246120] vga16fb: mapped to 0x00000000bc4d42c2
- [ 0.460857] Console: switching to colour frame buffer device 80x30
- [ 0.463110] fb0: VGA16 VGA frame buffer device
- [ 0.477652] Console: switching to colour VGA+ 80x25
- [ 0.478140] vga16fb: initializing
- [ 0.478175] vga16fb: mapped to 0x00000000bc4d42c2
- [ 0.692751] Console: switching to colour frame buffer device 80x30
- [ 0.695008] fb0: VGA16 VGA frame buffer device
- [ 0.695234] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.695451] ACPI: Power Button [PWRB]
- [ 0.695691] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 0.710339] ACPI: Power Button [PWRB]
- [ 0.717969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.733488] ACPI: Power Button [PWRF]
- [ 0.741725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.757801] ACPI: Power Button [PWRF]
- [ 0.766206] Monitor-Mwait will be used to enter C-1 state
- [ 0.768230] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 0.777050] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 0.794837] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 0.812680] checking generic (a0000 10000) vs hw (e0000000 10000000)
- [ 0.812681] checking generic (a0000 10000) vs hw (f0000000 2000000)
- [ 0.812681] fb: switching to nouveaufb from VGA16 VGA
- [ 0.836436] Console: switching to colour VGA+ 80x25
- [ 0.836945] nouveau 0000:08:00.0: NVIDIA GM107 (117000a2)
- [ 0.947852] nouveau 0000:08:00.0: bios: version 82.07.55.00.34
- [ 0.948281] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 0.948450] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 0.948943] nouveau 0000:08:00.0: fb: 2048 MiB GDDR5
- [ 0.949075] nouveau 0000:08:00.0: bus: MMIO read of 00000000 FAULT at 3e6684 [ IBUS ]
- [ 0.979364] nouveau 0000:08:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
- [ 1.237211] tsc: Refined TSC clocksource calibration: 3193.998 MHz
- [ 1.237379] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a244aeba, max_idle_ns: 440795290469 ns
- [ 1.243213] clocksource: Switched to clocksource tsc
- [ 1.640589] [TTM] Zone kernel: Available graphics memory: 8173108 kiB
- [ 1.640703] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 1.640816] [TTM] Initializing pool allocator
- [ 1.640926] [TTM] Initializing DMA pool allocator
- [ 1.641043] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
- [ 1.641153] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
- [ 1.641269] nouveau 0000:08:00.0: DRM: TMDS table version 2.0
- [ 1.641381] nouveau 0000:08:00.0: DRM: DCB version 4.0
- [ 1.641492] nouveau 0000:08:00.0: DRM: DCB outp 00: 02000f00 00000000
- [ 1.641606] nouveau 0000:08:00.0: DRM: DCB outp 01: 01011f12 00020030
- [ 1.641720] nouveau 0000:08:00.0: DRM: DCB outp 02: 08022f82 00020030
- [ 1.641833] nouveau 0000:08:00.0: DRM: DCB outp 03: 02033f62 00020010
- [ 1.641947] nouveau 0000:08:00.0: DRM: DCB conn 00: 00000000
- [ 1.642059] nouveau 0000:08:00.0: DRM: DCB conn 01: 00010131
- [ 1.642171] nouveau 0000:08:00.0: DRM: DCB conn 02: 01000231
- [ 1.642284] nouveau 0000:08:00.0: DRM: DCB conn 03: 00020361
- [ 1.643309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.643436] [drm] Driver supports precise vblank timestamp query.
- [ 1.643989] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies
- [ 1.771755] nouveau 0000:08:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 00000000f1916864
- [ 1.772003] fbcon: nouveaufb (fb0) is primary device
- [ 1.828625] Console: switching to colour frame buffer device 240x67
- [ 1.830002] nouveau 0000:08:00.0: fb0: nouveaufb frame buffer device
- [ 1.830564] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on minor 0
- [ 1.831638] Console: switching to colour VGA+ 80x25
- [ 1.860935] [TTM] Finalizing pool allocator
- [ 1.861066] [TTM] Finalizing DMA pool allocator
- [ 1.861231] [TTM] Zone kernel: Used memory at exit: 0 kiB
- [ 1.861363] [TTM] Zone dma32: Used memory at exit: 0 kiB
- [ 1.862136] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 1.862342] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 1.862559] nouveau 0000:08:00.0: NVIDIA GM107 (117000a2)
- [ 1.973702] nouveau 0000:08:00.0: bios: version 82.07.55.00.34
- [ 1.974111] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 1.974317] nouveau 0000:08:00.0: SME is active, device will require DMA bounce buffers
- [ 1.974813] nouveau 0000:08:00.0: fb: 2048 MiB GDDR5
- [ 1.974968] nouveau 0000:08:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ IBUS ]
- [ 2.005518] nouveau 0000:08:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
- [ 2.666572] [TTM] Zone kernel: Available graphics memory: 8173108 kiB
- [ 2.666709] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 2.666843] [TTM] Initializing pool allocator
- [ 2.666973] [TTM] Initializing DMA pool allocator
- [ 2.667108] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
- [ 2.667243] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
- [ 2.667376] nouveau 0000:08:00.0: DRM: TMDS table version 2.0
- [ 2.667509] nouveau 0000:08:00.0: DRM: DCB version 4.0
- [ 2.667641] nouveau 0000:08:00.0: DRM: DCB outp 00: 02000f00 00000000
- [ 2.667776] nouveau 0000:08:00.0: DRM: DCB outp 01: 01011f12 00020030
- [ 2.667909] nouveau 0000:08:00.0: DRM: DCB outp 02: 08022f82 00020030
- [ 2.668043] nouveau 0000:08:00.0: DRM: DCB outp 03: 02033f62 00020010
- [ 2.668177] nouveau 0000:08:00.0: DRM: DCB conn 00: 00000000
- [ 2.668310] nouveau 0000:08:00.0: DRM: DCB conn 01: 00010131
- [ 2.668442] nouveau 0000:08:00.0: DRM: DCB conn 02: 01000231
- [ 2.668573] nouveau 0000:08:00.0: DRM: DCB conn 03: 00020361
- [ 2.669675] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.669811] [drm] Driver supports precise vblank timestamp query.
- [ 2.670367] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies
- [ 2.797618] nouveau 0000:08:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 0000000067ac03fd
- [ 2.797893] fbcon: nouveaufb (fb0) is primary device
- [ 2.822949] Console: switching to colour frame buffer device 240x67
- [ 2.824326] nouveau 0000:08:00.0: fb0: nouveaufb frame buffer device
- [ 2.825023] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on minor 0
- [ 2.827420] loop: module loaded
- [ 2.827760] null: module loaded
- [ 2.827833] ahci 0000:01:00.1: version 3.0
- [ 2.827937] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
- [ 2.827976] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
- [ 2.827982] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
- [ 2.828407] scsi host0: ahci
- [ 2.828540] scsi host1: ahci
- [ 2.828627] scsi host2: ahci
- [ 2.828713] scsi host3: ahci
- [ 2.828801] scsi host4: ahci
- [ 2.828878] scsi host5: ahci
- [ 2.828970] scsi host6: ahci
- [ 2.829053] scsi host7: ahci
- [ 2.829097] ata1: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680100 irq 42
- [ 2.829104] ata2: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680180 irq 42
- [ 2.829108] ata3: DUMMY
- [ 2.829111] ata4: DUMMY
- [ 2.829115] ata5: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680300 irq 42
- [ 2.829120] ata6: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680380 irq 42
- [ 2.829124] ata7: DUMMY
- [ 2.829126] ata8: DUMMY
- [ 3.301596] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.308542] ata2.00: supports DRM functions and may not be fully accessible
- [ 3.308577] ata2.00: ATA-8: KINGSTON SKC300S37A120G, 603ABBF1, max UDMA/133
- [ 3.308582] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
- [ 3.556768] ata2.00: ATA Identify Device Log not supported
- [ 3.556782] ata2.00: Security Log not supported
- [ 3.565193] ata2.00: supports DRM functions and may not be fully accessible
- [ 3.595498] ata2.00: ATA Identify Device Log not supported
- [ 3.595513] ata2.00: Security Log not supported
- [ 3.595522] ata2.00: configured for UDMA/133
- [ 3.595571] ------------[ cut here ]------------
- [ 3.595595] WARNING: CPU: 9 PID: 1 at drivers/ata/libata-core.c:6694 ata_host_detach.cold+0xc/0x13
- [ 3.595603] Modules linked in:
- [ 3.595609] CPU: 9 PID: 1 Comm: swapper/0 Not tainted 4.19.72-gentoo #13
- [ 3.595615] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 3.595622] RIP: 0010:ata_host_detach.cold+0xc/0x13
- [ 3.595629] Code: 73 dd 9d ff 0f 0b e9 21 96 ff ff 48 c7 c7 48 c2 be a1 e8 60 dd 9d ff 0f 0b e9 7a 96 ff ff 48 c7 c7 48 c2 be a1 e8 4d dd 9d ff <0f> 0b e9 72 99 ff ff 55 48 89 e5 48 83 ec 60 48 89 4c 24 48 4c 89
- [ 3.595637] RSP: 0018:ffffa7710004bd88 EFLAGS: 00010246
- [ 3.595674] scsi 1:0:0:0: Direct-Access ATA KINGSTON SKC300S BBF1 PQ: 0 ANSI: 5
- [ 3.596137] RAX: 0000000000000024 RBX: 0000000000000001 RCX: 000000000000034c
- [ 3.596139] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffffffffa2396d6c
- [ 3.596708] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 3.596709] kworker/u64:10 (1476) used greatest stack depth: 14080 bytes left
- [ 3.596678] RBP: ffff8d4288974000 R08: 0000000000000000 R09: 000000000000034c
- [ 3.596678] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8d42888a4300
- [ 3.597100] sd 1:0:0:0: [sda] 4096-byte physical blocks
- [ 3.596678] R13: 0000000000000282 R14: 0000000000000000 R15: 0000000000000000
- [ 3.596678] FS: 0000000000000000(0000) GS:ffff8d428e840000(0000) knlGS:0000000000000000
- [ 3.596678] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 3.596678] CR2: 0000000000000000 CR3: 0000800175e0a000 CR4: 00000000003406e0
- [ 3.596678] Call Trace:
- [ 3.596678] pci_device_remove+0x44/0xb0
- [ 3.596678] really_probe+0xa0/0x310
- [ 3.597659] sd 1:0:0:0: [sda] Write Protect is off
- [ 3.596678] driver_probe_device+0x5d/0xb0
- [ 3.598207] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.596678] __driver_attach+0xd8/0xe0
- [ 3.598759] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.596678] ? driver_probe_device+0xb0/0xb0
- [ 3.596678] bus_for_each_dev+0x75/0xc0
- [ 3.599682] sda: sda1 sda2 sda3 sda4
- [ 3.596678] bus_add_driver+0x1bd/0x200
- [ 3.600388] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 3.596678] driver_register+0x67/0xb0
- [ 3.596678] ? ata_sff_init+0x2c/0x2c
- [ 3.596678] do_one_initcall+0x41/0x1b5
- [ 3.596678] kernel_init_freeable+0x15a/0x1e7
- [ 3.596678] ? rest_init+0x9a/0x9a
- [ 3.596678] kernel_init+0x5/0xfc
- [ 3.596678] ret_from_fork+0x22/0x40
- [ 3.596678] ---[ end trace da85573246261ba6 ]---
- [ 3.604677] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 3.605749] sd 1:0:0:0: [sda] Stopping disk
- [ 3.654320] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 3.654356] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 3.654618] sd 1:0:0:0: [sda] 4096-byte physical blocks
- [ 3.655178] sd 1:0:0:0: [sda] Write Protect is off
- [ 3.655419] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.655424] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.655769] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 3.656127] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 3.805692] sd 1:0:0:0: [sda] Stopping disk
- [ 3.964695] ata5: SATA link down (SStatus 0 SControl 330)
- [ 4.128478] ata2.00: disabled
- [ 4.270490] ata6: SATA link down (SStatus 0 SControl 330)
- [ 4.271017] ------------[ cut here ]------------
- [ 4.271382] WARNING: CPU: 0 PID: 1 at drivers/ata/libata-core.c:6694 ata_host_detach.cold+0xc/0x13
- [ 4.271619] Modules linked in:
- [ 4.271859] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.72-gentoo #13
- [ 4.272102] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 4.272339] RIP: 0010:ata_host_detach.cold+0xc/0x13
- [ 4.272366] Code: 73 dd 9d ff 0f 0b e9 21 96 ff ff 48 c7 c7 48 c2 be a1 e8 60 dd 9d ff 0f 0b e9 7a 96 ff ff 48 c7 c7 48 c2 be a1 e8 4d dd 9d ff <0f> 0b e9 72 99 ff ff 55 48 89 e5 48 83 ec 60 48 89 4c 24 48 4c 89
- [ 4.272366] RSP: 0018:ffffa7710004bd88 EFLAGS: 00010246
- [ 4.272366] RAX: 0000000000000024 RBX: 0000000000000005 RCX: 0000000000000383
- [ 4.272366] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffffffffa2396d6c
- [ 4.272366] RBP: ffff8d4288984000 R08: 0000000000000000 R09: 0000000000000383
- [ 4.272366] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8d42888a4300
- [ 4.272366] R13: 0000000000000282 R14: 0000000000000000 R15: 0000000000000000
- [ 4.272366] FS: 0000000000000000(0000) GS:ffff8d428e600000(0000) knlGS:0000000000000000
- [ 4.272366] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 4.272366] CR2: 0000000000000000 CR3: 0000800175e0a000 CR4: 00000000003406f0
- [ 4.272366] Call Trace:
- [ 4.272366] pci_device_remove+0x44/0xb0
- [ 4.272366] really_probe+0xa0/0x310
- [ 4.272366] driver_probe_device+0x5d/0xb0
- [ 4.272366] __driver_attach+0xd8/0xe0
- [ 4.272366] ? driver_probe_device+0xb0/0xb0
- [ 4.272366] bus_for_each_dev+0x75/0xc0
- [ 4.272366] bus_add_driver+0x1bd/0x200
- [ 4.272366] driver_register+0x67/0xb0
- [ 4.272366] ? ata_sff_init+0x2c/0x2c
- [ 4.272366] do_one_initcall+0x41/0x1b5
- [ 4.272366] kernel_init_freeable+0x15a/0x1e7
- [ 4.272366] ? rest_init+0x9a/0x9a
- [ 4.272366] kernel_init+0x5/0xfc
- [ 4.272366] ret_from_fork+0x22/0x40
- [ 4.272366] ---[ end trace da85573246261ba7 ]---
- [ 4.294222] scsi_eh_1 (1437) used greatest stack depth: 13952 bytes left
- [ 4.319264] scsi_eh_4 (1449) used greatest stack depth: 13752 bytes left
- [ 4.347450] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
- [ 4.347726] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
- [ 4.347940] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
- [ 4.348551] scsi host0: ahci
- [ 4.348860] scsi host1: ahci
- [ 4.349217] scsi host2: ahci
- [ 4.349571] scsi host3: ahci
- [ 4.349901] scsi host4: ahci
- [ 4.350210] scsi host5: ahci
- [ 4.350506] scsi host6: ahci
- [ 4.350811] scsi host7: ahci
- [ 4.351077] ata9: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680100 irq 42
- [ 4.351317] ata10: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680180 irq 42
- [ 4.351555] ata11: DUMMY
- [ 4.351794] ata12: DUMMY
- [ 4.352032] ata13: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680300 irq 42
- [ 4.352277] ata14: SATA max UDMA/133 abar m131072@0xf6680000 port 0xf6680380 irq 42
- [ 4.352516] ata15: DUMMY
- [ 4.352754] ata16: DUMMY
- [ 4.353105] ahci 0000:0a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- [ 4.353356] ahci 0000:0a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
- [ 4.353694] scsi host8: ahci
- [ 4.353975] ata17: SATA max UDMA/133 abar m4096@0xf6708000 port 0xf6708100 irq 44
- [ 4.354228] ------------[ cut here ]------------
- [ 4.354478] WARNING: CPU: 1 PID: 1 at drivers/ata/libata-core.c:6694 ata_host_detach.cold+0xc/0x13
- [ 4.354730] Modules linked in:
- [ 4.354977] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.19.72-gentoo #13
- [ 4.355224] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 4.355224] RIP: 0010:ata_host_detach.cold+0xc/0x13
- [ 4.355224] Code: 73 dd 9d ff 0f 0b e9 21 96 ff ff 48 c7 c7 48 c2 be a1 e8 60 dd 9d ff 0f 0b e9 7a 96 ff ff 48 c7 c7 48 c2 be a1 e8 4d dd 9d ff <0f> 0b e9 72 99 ff ff 55 48 89 e5 48 83 ec 60 48 89 4c 24 48 4c 89
- [ 4.355224] RSP: 0018:ffffa7710004bd88 EFLAGS: 00010246
- [ 4.355224] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 00000000000003bc
- [ 4.355224] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffffffffa2396d6c
- [ 4.355224] RBP: ffff8d428916c000 R08: 0000000000000000 R09: 00000000000003bc
- [ 4.355224] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8d42892b8b00
- [ 4.355224] R13: 0000000000000282 R14: 0000000000000000 R15: 0000000000000000
- [ 4.355224] FS: 0000000000000000(0000) GS:ffff8d428e640000(0000) knlGS:0000000000000000
- [ 4.355224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 4.355224] CR2: 0000000000000000 CR3: 0000800175e0a000 CR4: 00000000003406e0
- [ 4.355224] Call Trace:
- [ 4.355224] pci_device_remove+0x44/0xb0
- [ 4.355224] really_probe+0xa0/0x310
- [ 4.355224] driver_probe_device+0x5d/0xb0
- [ 4.355224] __driver_attach+0xd8/0xe0
- [ 4.355224] ? driver_probe_device+0xb0/0xb0
- [ 4.355224] bus_for_each_dev+0x75/0xc0
- [ 4.355224] bus_add_driver+0x1bd/0x200
- [ 4.355224] driver_register+0x67/0xb0
- [ 4.355224] ? ata_sff_init+0x2c/0x2c
- [ 4.355224] do_one_initcall+0x41/0x1b5
- [ 4.355224] kernel_init_freeable+0x15a/0x1e7
- [ 4.355224] ? rest_init+0x9a/0x9a
- [ 4.355224] kernel_init+0x5/0xfc
- [ 4.355224] ret_from_fork+0x22/0x40
- [ 4.355224] ---[ end trace da85573246261ba8 ]---
- [ 4.372348] ahci 0000:0a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- [ 4.372579] ahci 0000:0a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
- [ 4.372897] scsi host8: ahci
- [ 4.373161] ata18: SATA max UDMA/133 abar m4096@0xf6708000 port 0xf6708100 irq 44
- [ 4.373464] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 4.374097] MACsec IEEE 802.1AE
- [ 4.374407] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- [ 4.374815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.375075] ehci-pci: EHCI PCI platform driver
- [ 4.375338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.375585] ohci-pci: OHCI PCI platform driver
- [ 4.375839] uhci_hcd: USB Universal Host Controller Interface driver
- [ 4.376144] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 4.376430] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
- [ 4.431978] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
- [ 4.432500] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 4.432744] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.432989] usb usb1: Product: xHCI Host Controller
- [ 4.433233] usb usb1: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.433476] usb usb1: SerialNumber: 0000:01:00.0
- [ 4.433780] hub 1-0:1.0: USB hub found
- [ 4.434037] hub 1-0:1.0: 10 ports detected
- [ 4.437564] hub 1-0:1.0: USB hub found
- [ 4.437814] hub 1-0:1.0: 10 ports detected
- [ 4.441349] hub 1-0:1.0: USB hub found
- [ 4.441596] hub 1-0:1.0: 10 ports detected
- [ 4.445052] hub 1-0:1.0: USB hub found
- [ 4.445294] hub 1-0:1.0: 10 ports detected
- [ 4.448696] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 4.448942] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
- [ 4.449167] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
- [ 4.449424] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.449651] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 4.449866] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.450084] usb usb2: Product: xHCI Host Controller
- [ 4.450301] usb usb2: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.450497] usb usb2: SerialNumber: 0000:01:00.0
- [ 4.450733] hub 2-0:1.0: USB hub found
- [ 4.450918] hub 2-0:1.0: 4 ports detected
- [ 4.452409] hub 2-0:1.0: USB hub found
- [ 4.452588] hub 2-0:1.0: 4 ports detected
- [ 4.454094] hub 2-0:1.0: USB hub found
- [ 4.454276] hub 2-0:1.0: 4 ports detected
- [ 4.455742] hub 2-0:1.0: USB hub found
- [ 4.455920] hub 2-0:1.0: 4 ports detected
- [ 4.457373] xhci_hcd 0000:01:00.0: remove, state 1
- [ 4.457543] usb usb2: USB disconnect, device number 1
- [ 4.457836] xhci_hcd 0000:01:00.0: USB bus 2 deregistered
- [ 4.458069] xhci_hcd 0000:01:00.0: remove, state 1
- [ 4.458273] usb usb1: USB disconnect, device number 1
- [ 4.513984] xhci_hcd 0000:01:00.0: USB bus 1 deregistered
- [ 4.514231] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 4.514425] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
- [ 4.569878] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
- [ 4.570328] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 4.570506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.570679] usb usb1: Product: xHCI Host Controller
- [ 4.570855] usb usb1: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.571042] usb usb1: SerialNumber: 0000:01:00.0
- [ 4.571323] hub 1-0:1.0: USB hub found
- [ 4.571525] hub 1-0:1.0: 10 ports detected
- [ 4.574994] hub 1-0:1.0: USB hub found
- [ 4.575185] hub 1-0:1.0: 10 ports detected
- [ 4.578571] hub 1-0:1.0: USB hub found
- [ 4.578747] hub 1-0:1.0: 10 ports detected
- [ 4.582119] hub 1-0:1.0: USB hub found
- [ 4.582300] hub 1-0:1.0: 10 ports detected
- [ 4.585655] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 4.585843] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
- [ 4.586002] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
- [ 4.586194] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.586372] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 4.586533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.586694] usb usb2: Product: xHCI Host Controller
- [ 4.586880] usb usb2: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.587097] usb usb2: SerialNumber: 0000:01:00.0
- [ 4.587386] hub 2-0:1.0: USB hub found
- [ 4.587590] hub 2-0:1.0: 4 ports detected
- [ 4.589130] hub 2-0:1.0: USB hub found
- [ 4.589298] hub 2-0:1.0: 4 ports detected
- [ 4.590817] hub 2-0:1.0: USB hub found
- [ 4.590977] hub 2-0:1.0: 4 ports detected
- [ 4.592428] hub 2-0:1.0: USB hub found
- [ 4.592590] hub 2-0:1.0: 4 ports detected
- [ 4.594094] xhci_hcd 0000:09:00.3: xHCI Host Controller
- [ 4.594282] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 3
- [ 4.594534] xhci_hcd 0000:09:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
- [ 4.594923] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 4.595083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.595245] usb usb3: Product: xHCI Host Controller
- [ 4.595405] usb usb3: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.595564] usb usb3: SerialNumber: 0000:09:00.3
- [ 4.595808] hub 3-0:1.0: USB hub found
- [ 4.595975] hub 3-0:1.0: 4 ports detected
- [ 4.596232] hub 3-0:1.0: USB hub found
- [ 4.596399] hub 3-0:1.0: 4 ports detected
- [ 4.596683] hub 3-0:1.0: USB hub found
- [ 4.596848] hub 3-0:1.0: 4 ports detected
- [ 4.597083] hub 3-0:1.0: USB hub found
- [ 4.597247] hub 3-0:1.0: 4 ports detected
- [ 4.597490] xhci_hcd 0000:09:00.3: xHCI Host Controller
- [ 4.597666] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 4
- [ 4.597825] xhci_hcd 0000:09:00.3: Host supports USB 3.0 SuperSpeed
- [ 4.597992] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.598171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 4.598367] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.598573] usb usb4: Product: xHCI Host Controller
- [ 4.598787] usb usb4: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.599003] usb usb4: SerialNumber: 0000:09:00.3
- [ 4.599273] hub 4-0:1.0: USB hub found
- [ 4.599447] hub 4-0:1.0: 4 ports detected
- [ 4.599740] hub 4-0:1.0: USB hub found
- [ 4.599909] hub 4-0:1.0: 4 ports detected
- [ 4.600213] hub 4-0:1.0: USB hub found
- [ 4.600385] hub 4-0:1.0: 4 ports detected
- [ 4.600625] hub 4-0:1.0: USB hub found
- [ 4.600785] hub 4-0:1.0: 4 ports detected
- [ 4.601017] xhci_hcd 0000:09:00.3: remove, state 1
- [ 4.601174] usb usb4: USB disconnect, device number 1
- [ 4.601416] xhci_hcd 0000:09:00.3: USB bus 4 deregistered
- [ 4.601595] xhci_hcd 0000:09:00.3: remove, state 1
- [ 4.601752] usb usb3: USB disconnect, device number 1
- [ 4.602147] xhci_hcd 0000:09:00.3: USB bus 3 deregistered
- [ 4.602387] xhci_hcd 0000:09:00.3: xHCI Host Controller
- [ 4.602570] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 3
- [ 4.602821] xhci_hcd 0000:09:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
- [ 4.603206] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 4.603371] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.603536] usb usb3: Product: xHCI Host Controller
- [ 4.603699] usb usb3: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.603857] usb usb3: SerialNumber: 0000:09:00.3
- [ 4.604070] hub 3-0:1.0: USB hub found
- [ 4.604264] hub 3-0:1.0: 4 ports detected
- [ 4.604546] hub 3-0:1.0: USB hub found
- [ 4.604709] hub 3-0:1.0: 4 ports detected
- [ 4.604990] hub 3-0:1.0: USB hub found
- [ 4.605153] hub 3-0:1.0: 4 ports detected
- [ 4.605398] hub 3-0:1.0: USB hub found
- [ 4.605558] hub 3-0:1.0: 4 ports detected
- [ 4.605809] xhci_hcd 0000:09:00.3: xHCI Host Controller
- [ 4.605986] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 4
- [ 4.606142] xhci_hcd 0000:09:00.3: Host supports USB 3.0 SuperSpeed
- [ 4.606314] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.606490] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
- [ 4.606662] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.606869] usb usb4: Product: xHCI Host Controller
- [ 4.607076] usb usb4: Manufacturer: Linux 4.19.72-gentoo xhci-hcd
- [ 4.607294] usb usb4: SerialNumber: 0000:09:00.3
- [ 4.607547] hub 4-0:1.0: USB hub found
- [ 4.607723] hub 4-0:1.0: 4 ports detected
- [ 4.608001] hub 4-0:1.0: USB hub found
- [ 4.608171] hub 4-0:1.0: 4 ports detected
- [ 4.608471] hub 4-0:1.0: USB hub found
- [ 4.608638] hub 4-0:1.0: 4 ports detected
- [ 4.608880] hub 4-0:1.0: USB hub found
- [ 4.609044] hub 4-0:1.0: 4 ports detected
- [ 4.609324] usbcore: registered new interface driver cdc_acm
- [ 4.609486] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 4.609648] usbcore: registered new interface driver usblp
- [ 4.609822] usbcore: registered new interface driver usb-storage
- [ 4.609991] usbcore: registered new interface driver ums-realtek
- [ 4.610169] usbcore: registered new interface driver usbserial_generic
- [ 4.610339] usbserial: USB Serial support registered for generic
- [ 4.610521] usbcore: registered new interface driver ch341
- [ 4.610719] usbserial: USB Serial support registered for ch341-uart
- [ 4.610925] usbcore: registered new interface driver cp210x
- [ 4.611121] usbserial: USB Serial support registered for cp210x
- [ 4.611329] usbcore: registered new interface driver ftdi_sio
- [ 4.611523] usbserial: USB Serial support registered for FTDI USB Serial Device
- [ 4.611740] usbcore: registered new interface driver usb_serial_simple
- [ 4.611930] usbserial: USB Serial support registered for carelink
- [ 4.612133] usbserial: USB Serial support registered for zio
- [ 4.612349] usbserial: USB Serial support registered for funsoft
- [ 4.612544] usbserial: USB Serial support registered for flashloader
- [ 4.612745] usbserial: USB Serial support registered for google
- [ 4.612950] usbserial: USB Serial support registered for libtransistor
- [ 4.613153] usbserial: USB Serial support registered for vivopay
- [ 4.613361] usbserial: USB Serial support registered for moto_modem
- [ 4.613560] usbserial: USB Serial support registered for motorola_tetra
- [ 4.613759] usbserial: USB Serial support registered for novatel_gps
- [ 4.613959] usbserial: USB Serial support registered for hp4x
- [ 4.614157] usbserial: USB Serial support registered for suunto
- [ 4.614351] usbserial: USB Serial support registered for siemens_mpi
- [ 4.614554] i8042: PNP: No PS/2 controller found.
- [ 4.614757] mousedev: PS/2 mouse device common for all mice
- [ 4.615013] input: PC Speaker as /devices/platform/pcspkr/input/input4
- [ 4.615331] input: PC Speaker as /devices/platform/pcspkr/input/input5
- [ 4.615552] rtc_cmos 00:01: RTC can wake from S4
- [ 4.615955] rtc_cmos 00:01: registered as rtc0
- [ 4.616126] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 4.616373] rtc_cmos 00:01: RTC can wake from S4
- [ 4.616775] rtc_cmos 00:01: registered as rtc1
- [ 4.616952] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 4.617121] i2c /dev entries driver
- [ 4.617512] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
- [ 4.617719] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
- [ 4.617901] sp5100-tco sp5100-tco: Watchdog hardware is disabled
- [ 4.618137] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
- [ 4.618327] EDAC amd64: Node 0: DRAM ECC disabled.
- [ 4.618505] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 4.619064] hidraw: raw HID events driver (C) Jiri Kosina
- [ 4.619273] usbcore: registered new interface driver usbhid
- [ 4.619455] usbhid: USB HID core driver
- [ 4.619681] really_probe: driver_sysfs_add(05901221-D566-11D1-B2F0-00A0C9062910) failed
- [ 4.619867] wmi-bmof: probe of 05901221-D566-11D1-B2F0-00A0C9062910 failed with error 0
- [ 4.621423] Initializing XFRM netlink socket
- [ 4.621607] NET: Registered protocol family 17
- [ 4.621804] Key type dns_resolver registered
- [ 4.622681] mce: Using 23 MCE banks
- [ 4.622885] sched_clock: Marking stable (4632478620, -9821311)->(4729515808, -106858499)
- [ 4.623365] registered taskstats version 1
- [ 4.623546] Loading compiled-in X.509 certificates
- [ 4.623988] Magic number: 11:551:196
- [ 4.624197] drm card0: hash matches
- [ 4.624408] acpi device:51: hash matches
- [ 4.624605] console [netcon0] enabled
- [ 4.624789] netconsole: network logging started
- [ 4.625141] acpi_cpufreq: overriding BIOS provided _PSD data
- [ 4.682606] ata18: SATA link down (SStatus 0 SControl 300)
- [ 4.813211] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4.814563] ata9.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133
- [ 4.816367] ata9.00: configured for UDMA/133
- [ 4.818369] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5
- [ 4.859591] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 4.859768] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 4.860119] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 4.899591] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 4.899827] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 4.900353] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 4.927586] usb 3-1: new low-speed USB device number 2 using xhci_hcd
- [ 5.093439] usb 3-1: New USB device found, idVendor=046d, idProduct=c31b, bcdDevice=60.00
- [ 5.093690] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.093913] usb 3-1: Product: Logitech USB Keyboard
- [ 5.094084] usb 3-1: Manufacturer: Logitech
- [ 5.139128] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0001/input/input6
- [ 5.178169] usb 4-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
- [ 5.191371] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.192017] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0001/input/input7
- [ 5.204714] usb 4-4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.15
- [ 5.204927] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.205129] usb 4-4: Product: 4-Port USB 3.0 Hub
- [ 5.205367] usb 4-4: Manufacturer: Generic
- [ 5.234225] hub 4-4:1.0: USB hub found
- [ 5.235787] hub 4-4:1.0: 4 ports detected
- [ 5.239569] random: fast init done
- [ 5.240715] hub 4-4:1.0: USB hub found
- [ 5.242202] hub 4-4:1.0: 4 ports detected
- [ 5.245314] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.257583] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0002/input/input8
- [ 5.278968] hub 4-4:1.0: USB hub found
- [ 5.280471] hub 4-4:1.0: 4 ports detected
- [ 5.284212] hub 4-4:1.0: USB hub found
- [ 5.285576] hub 4-4:1.0: 4 ports detected
- [ 5.309886] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.310462] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0002/input/input9
- [ 5.362766] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.372702] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0003/input/input10
- [ 5.417591] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.424697] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0003/input/input11
- [ 5.425010] hid-generic 0003:046D:C31B.0003: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 5.425596] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0003/input/input12
- [ 5.477700] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0003/input/input13
- [ 5.478169] hid-generic 0003:046D:C31B.0003: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 5.487605] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0004/input/input14
- [ 5.539724] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0004/input/input15
- [ 5.540177] hid-generic 0003:046D:C31B.0004: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 5.540760] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0004/input/input16
- [ 5.570141] usb 4-4.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
- [ 5.592678] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0004/input/input17
- [ 5.592985] hid-generic 0003:046D:C31B.0004: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 5.598566] usb 4-4.4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.15
- [ 5.598811] usb 4-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.599162] usb 4-4.4: Product: 4-Port USB 3.0 Hub
- [ 5.599609] usb 4-4.4: Manufacturer: Generic
- [ 5.641156] ata10.00: supports DRM functions and may not be fully accessible
- [ 5.641406] ata10.00: ATA-8: KINGSTON SKC300S37A120G, 603ABBF1, max UDMA/133
- [ 5.641756] ata10.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
- [ 5.657413] hub 4-4.4:1.0: USB hub found
- [ 5.658985] hub 4-4.4:1.0: 4 ports detected
- [ 5.662716] hub 4-4.4:1.0: USB hub found
- [ 5.664080] hub 4-4.4:1.0: 4 ports detected
- [ 5.668572] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0005/input/input18
- [ 5.711701] hub 4-4.4:1.0: USB hub found
- [ 5.713286] hub 4-4.4:1.0: 4 ports detected
- [ 5.717963] hub 4-4.4:1.0: USB hub found
- [ 5.719330] hub 4-4.4:1.0: 4 ports detected
- [ 5.720311] hid-generic 0003:046D:C31B.0005: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.720863] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0005/input/input19
- [ 5.772778] hid-generic 0003:046D:C31B.0005: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.785630] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0006/input/input20
- [ 5.838024] hid-generic 0003:046D:C31B.0006: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.838633] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.0/0003:046D:C31B.0006/input/input21
- [ 5.887334] ata10.00: ATA Identify Device Log not supported
- [ 5.887620] ata10.00: Security Log not supported
- [ 5.890917] hid-generic 0003:046D:C31B.0006: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input0
- [ 5.896882] ata10.00: supports DRM functions and may not be fully accessible
- [ 5.900627] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0007/input/input22
- [ 5.925871] ata10.00: ATA Identify Device Log not supported
- [ 5.926139] ata10.00: Security Log not supported
- [ 5.926561] ata10.00: configured for UDMA/133
- [ 5.927151] scsi 1:0:0:0: Direct-Access ATA KINGSTON SKC300S BBF1 PQ: 0 ANSI: 5
- [ 5.927755] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 5.928045] sd 1:0:0:0: [sda] 4096-byte physical blocks
- [ 5.928488] sd 1:0:0:0: [sda] Write Protect is off
- [ 5.928955] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 5.928959] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.929712] sda: sda1 sda2 sda3 sda4
- [ 5.930111] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 5.930609] sd 1:0:0:0: [sda] Synchronizing SCSI cache
- [ 5.931726] sd 1:0:0:0: [sda] Stopping disk
- [ 5.952276] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0007/input/input23
- [ 5.952644] hid-generic 0003:046D:C31B.0007: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 5.953258] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0007/input/input24
- [ 5.984263] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 5.984573] sd 1:0:0:0: [sda] 4096-byte physical blocks
- [ 5.984748] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 5.984993] sd 1:0:0:0: [sda] Write Protect is off
- [ 5.985979] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 5.985983] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 6.005257] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0007/input/input25
- [ 6.005589] hid-generic 0003:046D:C31B.0007: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 6.015660] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0008/input/input26
- [ 6.067690] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0008/input/input27
- [ 6.068203] hid-generic 0003:046D:C31B.0008: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 6.068829] input: Logitech Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0008/input/input28
- [ 6.120685] input: Logitech Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-1/3-1:1.1/0003:046D:C31B.0008/input/input29
- [ 6.121196] hid-generic 0003:046D:C31B.0008: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:09:00.3-1/input1
- [ 6.139325] sda: sda1 sda2 sda3 sda4
- [ 6.140189] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 6.235584] usb 3-2: new low-speed USB device number 3 using xhci_hcd
- [ 6.293059] ata13: SATA link down (SStatus 0 SControl 330)
- [ 6.396448] usb 3-2: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01
- [ 6.396791] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 6.397112] usb 3-2: Product: USB Laser Mouse
- [ 6.397508] usb 3-2: Manufacturer: Logitech
- [ 6.435081] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.0009/input/input30
- [ 6.435446] hid-generic 0003:046D:C069.0009: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.435915] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.0009/input/input31
- [ 6.436205] hid-generic 0003:046D:C069.0009: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.448527] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.000A/input/input32
- [ 6.448844] hid-generic 0003:046D:C069.000A: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.449352] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.000A/input/input33
- [ 6.449706] hid-generic 0003:046D:C069.000A: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.484602] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.000B/input/input34
- [ 6.484968] hid-generic 0003:046D:C069.000B: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.485516] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.000B/input/input35
- [ 6.485867] hid-generic 0003:046D:C069.000B: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.498529] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.000C/input/input36
- [ 6.498824] hid-generic 0003:046D:C069.000C: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.499445] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:09:00.3/usb3/3-2/3-2:1.0/0003:046D:C069.000C/input/input37
- [ 6.499854] hid-generic 0003:046D:C069.000C: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:09:00.3-2/input0
- [ 6.604551] ata14: SATA link down (SStatus 0 SControl 330)
- [ 6.605493] md: Waiting for all devices to be available before autodetect
- [ 6.605784] md: If you don't use raid, use raid=noautodetect
- [ 6.606345] md: Autodetecting RAID arrays.
- [ 6.606727] md: autorun ...
- [ 6.607217] md: ... autorun DONE.
- [ 6.613037] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.613310] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
- [ 6.614216] usb 3-4: new high-speed USB device number 4 using xhci_hcd
- [ 6.614400] devtmpfs: mounted
- [ 6.758839] usb 3-4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.15
- [ 6.759097] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 6.759506] usb 3-4: Product: 4-Port USB 2.0 Hub
- [ 6.759968] usb 3-4: Manufacturer: Generic
- [ 6.765041] kworker/u64:7 (2349) used greatest stack depth: 13648 bytes left
- [ 6.787666] Freeing unused kernel image memory: 1164K
- [ 6.798192] Write protecting the kernel read-only data: 18432k
- [ 6.799541] Freeing unused kernel image memory: 2004K
- [ 6.799927] Freeing unused kernel image memory: 1024K
- [ 6.800195] Run /sbin/init as init process
- [ 6.814974] hub 3-4:1.0: USB hub found
- [ 6.816461] hub 3-4:1.0: 4 ports detected
- [ 6.839199] loadkeys (2358) used greatest stack depth: 13552 bytes left
- [ 6.839454] init-early.sh (2355) used greatest stack depth: 13176 bytes left
- [ 6.942347] hub 3-4:1.0: USB hub found
- [ 6.943839] hub 3-4:1.0: 4 ports detected
- [ 7.010008] random: lvm: uninitialized urandom read (4 bytes read)
- [ 7.014224] random: lvm: uninitialized urandom read (4 bytes read)
- [ 7.102853] hub 3-4:1.0: USB hub found
- [ 7.104319] hub 3-4:1.0: 4 ports detected
- [ 7.230349] hub 3-4:1.0: USB hub found
- [ 7.231824] hub 3-4:1.0: 4 ports detected
- [ 7.316966] udevd[2847]: starting version 3.2.9
- [ 7.320783] random: udevd: uninitialized urandom read (16 bytes read)
- [ 7.334178] udevd[2847]: starting eudev-3.2.9
- [ 7.378932] libphy: r8169: probed
- [ 7.379202] r8169 0000:07:00.0 eth0: RTL8168h/8111h, 04:d9:f5:c9:7e:05, XID 54100800, IRQ 62
- [ 7.379203] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 7.381416] Error: Driver 'pcspkr' is already registered, aborting...
- [ 7.385961] snd_hda_intel 0000:08:00.1: Disabling MSI
- [ 7.386130] snd_hda_intel 0000:08:00.1: Disabling MSI
- [ 7.386506] snd_hda_intel 0000:08:00.1: SME is active, device will require DMA bounce buffers
- [ 7.386506] snd_hda_intel 0000:08:00.1: SME is active, device will require DMA bounce buffers
- [ 7.386627] snd_hda_intel 0000:0a:00.3: SME is active, device will require DMA bounce buffers
- [ 7.386628] snd_hda_intel 0000:0a:00.3: SME is active, device will require DMA bounce buffers
- [ 7.414824] libphy: r8169: probed
- [ 7.415068] r8169 0000:07:00.0 eth0: RTL8168h/8111h, 04:d9:f5:c9:7e:05, XID 54100800, IRQ 62
- [ 7.415070] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 7.419479] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 7.419481] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.419482] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 7.419483] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
- [ 7.419484] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
- [ 7.419484] snd_hda_codec_realtek hdaudioC1D0: inputs:
- [ 7.419485] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
- [ 7.419486] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
- [ 7.419487] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
- [ 7.431053] ------------[ cut here ]------------
- [ 7.431065] WARNING: CPU: 14 PID: 3004 at sound/pci/hda/hda_bind.c:84 hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.431065] Modules linked in: snd_hda_codec_realtek(+) snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 snd_timer snd
- [ 7.431071] CPU: 14 PID: 3004 Comm: modprobe Tainted: G W 4.19.72-gentoo #13
- [ 7.431072] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 7.431074] RIP: 0010:hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.431075] Code: fc 90 e0 48 c7 83 18 04 00 00 00 00 00 00 e9 97 fe ff ff 41 bc f4 ff ff ff e9 8c fe ff ff 48 c7 c7 58 fb 49 c0 e8 87 af 80 e0 <0f> 0b 41 bc ea ff ff ff e9 5a 26 ff ff 48 c7 c7 a8 fb 49 c0 e8 6e
- [ 7.431076] RSP: 0018:ffffa77101f57bb0 EFLAGS: 00010246
- [ 7.431077] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 0000000000000574
- [ 7.431077] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffffffffa2396d6c
- [ 7.431078] RBP: ffffffffc052ff40 R08: 0000000000000001 R09: 0000000000000574
- [ 7.431078] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
- [ 7.431079] R13: ffffffffc052f820 R14: 0000000000000000 R15: 0000000000000024
- [ 7.431080] FS: 00007f66b78444c0(0000) GS:ffff8d428e980000(0000) knlGS:0000000000000000
- [ 7.431080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 7.431081] CR2: 0000556958fe5000 CR3: 0000800403536000 CR4: 00000000003406e0
- [ 7.431081] Call Trace:
- [ 7.431086] really_probe+0x179/0x310
- [ 7.431087] driver_probe_device+0x5d/0xb0
- [ 7.431089] __driver_attach+0xd8/0xe0
- [ 7.431090] ? driver_probe_device+0xb0/0xb0
- [ 7.431091] bus_for_each_dev+0x75/0xc0
- [ 7.431092] bus_add_driver+0x1bd/0x200
- [ 7.431094] driver_register+0x67/0xb0
- [ 7.431095] ? 0xffffffffc053e000
- [ 7.431096] do_one_initcall+0x41/0x1b5
- [ 7.431099] ? _cond_resched+0x14/0x30
- [ 7.431102] ? kmem_cache_alloc_trace+0x4a/0x190
- [ 7.431103] do_init_module+0x56/0x1f0
- [ 7.431104] load_module+0x1da5/0x2300
- [ 7.431106] ? __symbol_put+0x70/0x70
- [ 7.431108] __do_sys_finit_module+0xfd/0x120
- [ 7.431109] do_syscall_64+0x43/0xf0
- [ 7.431111] entry_SYSCALL_64_after_hwframe+0x44/0xa9
- [ 7.431112] RIP: 0033:0x7f66b796ede9
- [ 7.431113] Code: 00 00 00 75 05 48 83 c4 18 c3 e8 82 8d 01 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 77 90 0c 00 f7 d8 64 89 01 48
- [ 7.431113] RSP: 002b:00007ffe12827d18 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
- [ 7.431114] RAX: ffffffffffffffda RBX: 000055c2a0537b30 RCX: 00007f66b796ede9
- [ 7.431114] RDX: 0000000000000000 RSI: 000055c29f499438 RDI: 0000000000000001
- [ 7.431115] RBP: 000055c29f499438 R08: 0000000000000000 R09: 0000000000000000
- [ 7.431115] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
- [ 7.431116] R13: 000055c2a05379c0 R14: 0000000000040000 R15: 000055c2a0537b30
- [ 7.431117] ---[ end trace da85573246261baa ]---
- [ 7.431119] snd_hda_codec_realtek: probe of hdaudioC1D0 failed with error -22
- [ 7.431978] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 7.431980] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.431981] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 7.431982] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
- [ 7.431983] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
- [ 7.431983] snd_hda_codec_realtek hdaudioC1D0: inputs:
- [ 7.431985] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
- [ 7.431985] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
- [ 7.431986] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
- [ 7.442963] ------------[ cut here ]------------
- [ 7.442977] WARNING: CPU: 1 PID: 17 at sound/pci/hda/hda_bind.c:84 hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.442977] Modules linked in: snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 snd_timer snd
- [ 7.442982] CPU: 1 PID: 17 Comm: kworker/1:0 Tainted: G W 4.19.72-gentoo #13
- [ 7.442982] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 7.442985] Workqueue: events azx_probe_work [snd_hda_intel]
- [ 7.442987] RIP: 0010:hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.442988] Code: fc 90 e0 48 c7 83 18 04 00 00 00 00 00 00 e9 97 fe ff ff 41 bc f4 ff ff ff e9 8c fe ff ff 48 c7 c7 58 fb 49 c0 e8 87 af 80 e0 <0f> 0b 41 bc ea ff ff ff e9 5a 26 ff ff 48 c7 c7 a8 fb 49 c0 e8 6e
- [ 7.442989] RSP: 0018:ffffa77101acbd20 EFLAGS: 00010246
- [ 7.442990] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 00000000000005a9
- [ 7.442991] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffffffffa2396d6c
- [ 7.442991] RBP: ffffffffc052ff40 R08: 0000000000000001 R09: 00000000000005a9
- [ 7.442991] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
- [ 7.442992] R13: ffffffffc052f820 R14: 0000000000000000 R15: 0000000000000024
- [ 7.442993] FS: 0000000000000000(0000) GS:ffff8d428e640000(0000) knlGS:0000000000000000
- [ 7.442993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 7.442994] CR2: 00007fa943fd3740 CR3: 0000800175e0a000 CR4: 00000000003406e0
- [ 7.442994] Call Trace:
- [ 7.442999] really_probe+0x179/0x310
- [ 7.443001] driver_probe_device+0x5d/0xb0
- [ 7.443002] ? __driver_attach+0xe0/0xe0
- [ 7.443003] bus_for_each_drv+0x76/0xc0
- [ 7.443004] __device_attach+0xfb/0x160
- [ 7.443006] snd_hda_codec_configure+0x62/0x160 [snd_hda_codec]
- [ 7.443009] azx_codec_configure+0x2a/0x60 [snd_hda_codec]
- [ 7.443010] azx_probe_continue+0x401/0x8a0 [snd_hda_intel]
- [ 7.443013] process_one_work+0x1ca/0x3a0
- [ 7.443014] worker_thread+0x45/0x3c0
- [ 7.443015] ? trace_event_raw_event_workqueue_execute_start+0xd0/0xd0
- [ 7.443017] kthread+0x113/0x130
- [ 7.443018] ? kthread_create_worker_on_cpu+0x70/0x70
- [ 7.443020] ret_from_fork+0x22/0x40
- [ 7.443022] ---[ end trace da85573246261bab ]---
- [ 7.443024] snd_hda_codec_realtek: probe of hdaudioC1D0 failed with error -22
- [ 7.444083] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 7.444084] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.444085] snd_hda_codec_generic hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 7.444085] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
- [ 7.444086] snd_hda_codec_generic hdaudioC1D0: dig-out=0x11/0x0
- [ 7.444086] snd_hda_codec_generic hdaudioC1D0: inputs:
- [ 7.444087] snd_hda_codec_generic hdaudioC1D0: Front Mic=0x19
- [ 7.444088] snd_hda_codec_generic hdaudioC1D0: Rear Mic=0x18
- [ 7.444089] snd_hda_codec_generic hdaudioC1D0: Line=0x1a
- [ 7.453974] ------------[ cut here ]------------
- [ 7.453983] WARNING: CPU: 1 PID: 17 at sound/pci/hda/hda_bind.c:84 hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.453983] Modules linked in: snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 snd_timer snd
- [ 7.453987] CPU: 1 PID: 17 Comm: kworker/1:0 Tainted: G W 4.19.72-gentoo #13
- [ 7.453988] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 7.453990] Workqueue: events azx_probe_work [snd_hda_intel]
- [ 7.453992] RIP: 0010:hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.453993] Code: fc 90 e0 48 c7 83 18 04 00 00 00 00 00 00 e9 97 fe ff ff 41 bc f4 ff ff ff e9 8c fe ff ff 48 c7 c7 58 fb 49 c0 e8 87 af 80 e0 <0f> 0b 41 bc ea ff ff ff e9 5a 26 ff ff 48 c7 c7 a8 fb 49 c0 e8 6e
- [ 7.453994] RSP: 0018:ffffa77101acbd20 EFLAGS: 00010246
- [ 7.453994] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 00000000000005d4
- [ 7.453995] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffffffffa2396d6c
- [ 7.453995] RBP: ffffffffc04be0c0 R08: 0000000000000001 R09: 00000000000005d4
- [ 7.453996] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
- [ 7.453996] R13: ffffffffc04be000 R14: 0000000000000000 R15: 0000000000000024
- [ 7.453997] FS: 0000000000000000(0000) GS:ffff8d428e640000(0000) knlGS:0000000000000000
- [ 7.453997] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 7.453998] CR2: 00007fa943fd3740 CR3: 0000800175e0a000 CR4: 00000000003406e0
- [ 7.453998] Call Trace:
- [ 7.454000] really_probe+0x179/0x310
- [ 7.454001] driver_probe_device+0x5d/0xb0
- [ 7.454002] ? __driver_attach+0xe0/0xe0
- [ 7.454004] bus_for_each_drv+0x76/0xc0
- [ 7.454005] __device_attach+0xfb/0x160
- [ 7.454007] snd_hda_codec_configure+0xe0/0x160 [snd_hda_codec]
- [ 7.454009] azx_codec_configure+0x2a/0x60 [snd_hda_codec]
- [ 7.454010] azx_probe_continue+0x401/0x8a0 [snd_hda_intel]
- [ 7.454011] process_one_work+0x1ca/0x3a0
- [ 7.454013] worker_thread+0x45/0x3c0
- [ 7.454014] ? trace_event_raw_event_workqueue_execute_start+0xd0/0xd0
- [ 7.454015] kthread+0x113/0x130
- [ 7.454016] ? kthread_create_worker_on_cpu+0x70/0x70
- [ 7.454017] ret_from_fork+0x22/0x40
- [ 7.454019] ---[ end trace da85573246261bac ]---
- [ 7.454020] snd_hda_codec_generic: probe of hdaudioC1D0 failed with error -22
- [ 7.454022] hdaudio hdaudioC1D0: Unable to bind the codec
- [ 7.466429] EXT4-fs (sda4): re-mounted. Opts: (null)
- [ 7.510581] Adding 16777212k swap on /dev/sda3. Priority:-2 extents:1 across:16777212k SS
- [ 7.579187] usb 3-4.4: new high-speed USB device number 5 using xhci_hcd
- [ 7.623246] ------------[ cut here ]------------
- [ 7.623261] WARNING: CPU: 5 PID: 3172 at sound/pci/hda/hda_bind.c:84 hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.623261] Modules linked in: snd_hda_codec_hdmi(+) snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 snd_timer snd
- [ 7.623268] CPU: 5 PID: 3172 Comm: modprobe Tainted: G W 4.19.72-gentoo #13
- [ 7.623269] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 7.623271] RIP: 0010:hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.623272] Code: fc 90 e0 48 c7 83 18 04 00 00 00 00 00 00 e9 97 fe ff ff 41 bc f4 ff ff ff e9 8c fe ff ff 48 c7 c7 58 fb 49 c0 e8 87 af 80 e0 <0f> 0b 41 bc ea ff ff ff e9 5a 26 ff ff 48 c7 c7 a8 fb 49 c0 e8 6e
- [ 7.623273] RSP: 0018:ffffa771023c7bb0 EFLAGS: 00010246
- [ 7.623274] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 00000000000005fa
- [ 7.623274] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffffffffa2396d6c
- [ 7.623275] RBP: ffffffffc045e100 R08: 0000000000000001 R09: 00000000000005fa
- [ 7.623275] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
- [ 7.623276] R13: ffffffffc045e000 R14: 0000000000000000 R15: 0000000000000024
- [ 7.623277] FS: 00007fd2089004c0(0000) GS:ffff8d428e740000(0000) knlGS:0000000000000000
- [ 7.623277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 7.623278] CR2: 00007fd20895c8d0 CR3: 000080040b860000 CR4: 00000000003406e0
- [ 7.623278] Call Trace:
- [ 7.623283] really_probe+0x179/0x310
- [ 7.623285] driver_probe_device+0x5d/0xb0
- [ 7.623286] __driver_attach+0xd8/0xe0
- [ 7.623287] ? driver_probe_device+0xb0/0xb0
- [ 7.623289] bus_for_each_dev+0x75/0xc0
- [ 7.623290] bus_add_driver+0x1bd/0x200
- [ 7.623291] driver_register+0x67/0xb0
- [ 7.623292] ? 0xffffffffc03f0000
- [ 7.623294] do_one_initcall+0x41/0x1b5
- [ 7.623297] ? _cond_resched+0x14/0x30
- [ 7.623299] ? kmem_cache_alloc_trace+0x4a/0x190
- [ 7.623301] do_init_module+0x56/0x1f0
- [ 7.623302] load_module+0x1da5/0x2300
- [ 7.623304] ? __symbol_put+0x70/0x70
- [ 7.623305] __do_sys_finit_module+0xfd/0x120
- [ 7.623306] do_syscall_64+0x43/0xf0
- [ 7.623308] entry_SYSCALL_64_after_hwframe+0x44/0xa9
- [ 7.623309] RIP: 0033:0x7fd208a2ade9
- [ 7.623310] Code: 00 00 00 75 05 48 83 c4 18 c3 e8 82 8d 01 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 77 90 0c 00 f7 d8 64 89 01 48
- [ 7.623310] RSP: 002b:00007ffd6aa3f468 EFLAGS: 00000202 ORIG_RAX: 0000000000000139
- [ 7.623311] RAX: ffffffffffffffda RBX: 0000556d4574fb90 RCX: 00007fd208a2ade9
- [ 7.623312] RDX: 0000000000000000 RSI: 0000556d44cee438 RDI: 0000000000000000
- [ 7.623312] RBP: 0000556d44cee438 R08: 0000000000000000 R09: 0000000000000000
- [ 7.623312] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
- [ 7.623313] R13: 0000556d4574fa20 R14: 0000000000040000 R15: 0000556d4574fb90
- [ 7.623314] ---[ end trace da85573246261bad ]---
- [ 7.623316] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -22
- [ 7.684699] usb 3-4.4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.15
- [ 7.684701] usb 3-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 7.684702] usb 3-4.4: Product: 4-Port USB 2.0 Hub
- [ 7.684703] usb 3-4.4: Manufacturer: Generic
- [ 7.742988] hub 3-4.4:1.0: USB hub found
- [ 7.744320] hub 3-4.4:1.0: 4 ports detected
- [ 7.751236] ------------[ cut here ]------------
- [ 7.751249] WARNING: CPU: 1 PID: 93 at sound/pci/hda/hda_bind.c:84 hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.751250] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 snd_timer snd
- [ 7.751256] CPU: 1 PID: 93 Comm: kworker/1:1 Tainted: G W 4.19.72-gentoo #13
- [ 7.751256] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 7.751259] Workqueue: events azx_probe_work [snd_hda_intel]
- [ 7.751261] RIP: 0010:hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.751262] Code: fc 90 e0 48 c7 83 18 04 00 00 00 00 00 00 e9 97 fe ff ff 41 bc f4 ff ff ff e9 8c fe ff ff 48 c7 c7 58 fb 49 c0 e8 87 af 80 e0 <0f> 0b 41 bc ea ff ff ff e9 5a 26 ff ff 48 c7 c7 a8 fb 49 c0 e8 6e
- [ 7.751263] RSP: 0018:ffffa77101dabd20 EFLAGS: 00010246
- [ 7.751264] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 000000000000062c
- [ 7.751264] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffffffffa2396d6c
- [ 7.751265] RBP: ffffffffc045e100 R08: 0000000000000001 R09: 000000000000062c
- [ 7.751265] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
- [ 7.751266] R13: ffffffffc045e000 R14: 0000000000000000 R15: 0000000000000024
- [ 7.751266] FS: 0000000000000000(0000) GS:ffff8d428e640000(0000) knlGS:0000000000000000
- [ 7.751267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 7.751267] CR2: 00005600c97b8018 CR3: 0000800403736000 CR4: 00000000003406e0
- [ 7.751268] Call Trace:
- [ 7.751273] really_probe+0x179/0x310
- [ 7.751274] driver_probe_device+0x5d/0xb0
- [ 7.751276] ? __driver_attach+0xe0/0xe0
- [ 7.751277] bus_for_each_drv+0x76/0xc0
- [ 7.751278] __device_attach+0xfb/0x160
- [ 7.751281] snd_hda_codec_configure+0x62/0x160 [snd_hda_codec]
- [ 7.751283] azx_codec_configure+0x2a/0x60 [snd_hda_codec]
- [ 7.751285] azx_probe_continue+0x401/0x8a0 [snd_hda_intel]
- [ 7.751287] process_one_work+0x1ca/0x3a0
- [ 7.751289] worker_thread+0x45/0x3c0
- [ 7.751290] ? trace_event_raw_event_workqueue_execute_start+0xd0/0xd0
- [ 7.751292] kthread+0x113/0x130
- [ 7.751293] ? kthread_create_worker_on_cpu+0x70/0x70
- [ 7.751295] ret_from_fork+0x22/0x40
- [ 7.751297] ---[ end trace da85573246261bae ]---
- [ 7.751299] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -22
- [ 7.763227] ip (3555) used greatest stack depth: 12304 bytes left
- [ 7.870327] hub 3-4.4:1.0: USB hub found
- [ 7.871570] hub 3-4.4:1.0: 4 ports detected
- [ 7.876236] ------------[ cut here ]------------
- [ 7.876249] WARNING: CPU: 1 PID: 93 at sound/pci/hda/hda_bind.c:84 hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.876250] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 snd_timer snd
- [ 7.876256] CPU: 1 PID: 93 Comm: kworker/1:1 Tainted: G W 4.19.72-gentoo #13
- [ 7.876256] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 7.876259] Workqueue: events azx_probe_work [snd_hda_intel]
- [ 7.876261] RIP: 0010:hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.876262] Code: fc 90 e0 48 c7 83 18 04 00 00 00 00 00 00 e9 97 fe ff ff 41 bc f4 ff ff ff e9 8c fe ff ff 48 c7 c7 58 fb 49 c0 e8 87 af 80 e0 <0f> 0b 41 bc ea ff ff ff e9 5a 26 ff ff 48 c7 c7 a8 fb 49 c0 e8 6e
- [ 7.876263] RSP: 0018:ffffa77101dabd20 EFLAGS: 00010246
- [ 7.876264] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 0000000000000651
- [ 7.876265] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffffffffa2396d6c
- [ 7.876265] RBP: ffffffffc045e100 R08: 0000000000000001 R09: 0000000000000651
- [ 7.876265] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
- [ 7.876266] R13: ffffffffc045e000 R14: 0000000000000000 R15: 0000000000000024
- [ 7.876267] FS: 0000000000000000(0000) GS:ffff8d428e640000(0000) knlGS:0000000000000000
- [ 7.876267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 7.876268] CR2: 00007ffd1218a038 CR3: 000080040b0bc000 CR4: 00000000003406e0
- [ 7.876268] Call Trace:
- [ 7.876273] really_probe+0x179/0x310
- [ 7.876275] driver_probe_device+0x5d/0xb0
- [ 7.876276] ? __driver_attach+0xe0/0xe0
- [ 7.876277] bus_for_each_drv+0x76/0xc0
- [ 7.876278] __device_attach+0xfb/0x160
- [ 7.876281] snd_hda_codec_configure+0x142/0x160 [snd_hda_codec]
- [ 7.876283] azx_codec_configure+0x2a/0x60 [snd_hda_codec]
- [ 7.876285] azx_probe_continue+0x401/0x8a0 [snd_hda_intel]
- [ 7.876287] process_one_work+0x1ca/0x3a0
- [ 7.876288] worker_thread+0x45/0x3c0
- [ 7.876290] ? trace_event_raw_event_workqueue_execute_start+0xd0/0xd0
- [ 7.876291] kthread+0x113/0x130
- [ 7.876293] ? kthread_create_worker_on_cpu+0x70/0x70
- [ 7.876295] ret_from_fork+0x22/0x40
- [ 7.876296] ---[ end trace da85573246261baf ]---
- [ 7.876298] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -22
- [ 7.888193] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x7, too many assigned pins
- [ 7.888195] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
- [ 7.888196] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.888197] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.888198] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
- [ 7.888198] snd_hda_codec_generic hdaudioC0D0: dig-out=0x4/0x5
- [ 7.888199] snd_hda_codec_generic hdaudioC0D0: inputs:
- [ 7.940220] ------------[ cut here ]------------
- [ 7.940232] WARNING: CPU: 1 PID: 93 at sound/pci/hda/hda_bind.c:84 hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.940232] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 snd_timer snd
- [ 7.940238] CPU: 1 PID: 93 Comm: kworker/1:1 Tainted: G W 4.19.72-gentoo #13
- [ 7.940238] Hardware name: System manufacturer System Product Name/PRIME B450M-A, BIOS 1804 07/29/2019
- [ 7.940240] Workqueue: events azx_probe_work [snd_hda_intel]
- [ 7.940242] RIP: 0010:hda_codec_driver_probe.cold+0xc/0x19 [snd_hda_codec]
- [ 7.940243] Code: fc 90 e0 48 c7 83 18 04 00 00 00 00 00 00 e9 97 fe ff ff 41 bc f4 ff ff ff e9 8c fe ff ff 48 c7 c7 58 fb 49 c0 e8 87 af 80 e0 <0f> 0b 41 bc ea ff ff ff e9 5a 26 ff ff 48 c7 c7 a8 fb 49 c0 e8 6e
- [ 7.940244] RSP: 0018:ffffa77101dabd20 EFLAGS: 00010246
- [ 7.940245] RAX: 0000000000000024 RBX: 0000000000000000 RCX: 000000000000067a
- [ 7.940245] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffffffffa2396d6c
- [ 7.940246] RBP: ffffffffc04be0c0 R08: 0000000000000001 R09: 000000000000067a
- [ 7.940246] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
- [ 7.940246] R13: ffffffffc04be000 R14: 0000000000000000 R15: 0000000000000024
- [ 7.940247] FS: 0000000000000000(0000) GS:ffff8d428e640000(0000) knlGS:0000000000000000
- [ 7.940248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- [ 7.940248] CR2: 00007ffd1218a038 CR3: 000080040b0bc000 CR4: 00000000003406e0
- [ 7.940249] Call Trace:
- [ 7.940253] really_probe+0x179/0x310
- [ 7.940254] driver_probe_device+0x5d/0xb0
- [ 7.940255] ? __driver_attach+0xe0/0xe0
- [ 7.940257] bus_for_each_drv+0x76/0xc0
- [ 7.940258] __device_attach+0xfb/0x160
- [ 7.940260] snd_hda_codec_configure+0xe0/0x160 [snd_hda_codec]
- [ 7.940262] azx_codec_configure+0x2a/0x60 [snd_hda_codec]
- [ 7.940263] azx_probe_continue+0x401/0x8a0 [snd_hda_intel]
- [ 7.940266] process_one_work+0x1ca/0x3a0
- [ 7.940267] worker_thread+0x45/0x3c0
- [ 7.940268] ? trace_event_raw_event_workqueue_execute_start+0xd0/0xd0
- [ 7.940270] kthread+0x113/0x130
- [ 7.940271] ? kthread_create_worker_on_cpu+0x70/0x70
- [ 7.940273] ret_from_fork+0x22/0x40
- [ 7.940275] ---[ end trace da85573246261bb0 ]---
- [ 7.940276] snd_hda_codec_generic: probe of hdaudioC0D0 failed with error -22
- [ 7.940279] hdaudio hdaudioC0D0: Unable to bind the codec
- [ 8.030839] hub 3-4.4:1.0: USB hub found
- [ 8.032074] hub 3-4.4:1.0: 4 ports detected
- [ 8.158964] hub 3-4.4:1.0: USB hub found
- [ 8.160214] hub 3-4.4:1.0: 4 ports detected
- [ 9.407098] Generic PHY r8169-700:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE)
- [ 9.492992] ip (3995) used greatest stack depth: 10696 bytes left
- [ 13.625527] r8169 0000:07:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 14.957837] random: crng init done
- [ 14.957840] random: 7 urandom warning(s) missed due to ratelimiting
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement