gt-c3303i

option 01 :
 HP Samsung champ c3303i
2. Champ samsung data cable (mini usb). pake CA-101 can
3. C3300K_Flash_loader_7.4.4_SSG_v0.5
4. Firmware C3303IJPKB1

preparation:
A. Move all the important things in memory to memory card hp
2. Turn off the HP
3. Press the volume down key., (Some phones use the volume keys, please try on your phone)
4. Micro usb cable plugs into the phone, and computers to these machines
detect the DFU device debagai brarti is correct, if only as a
modem, disconnect the USB cable again, and try again,
5. The computer will ask for drivers, just install the driver manually, there is the flash loader driver, locate the folder C3300K_Flash_loader_7.4.4_SSG_v0.5
6. After the driver install is complete, remove the usb cable.

Re-flashing:
A. Open Flash loader 7.4.4_SSG_v0.5.exe
2. click on the model set, and select C3300_LIBRE_Setting_v02.mdl
3. check the "Application binary file", click browse, select file exstensi. PTT
4. Select "STL image file", click browse, select (STL .....))
5. select "TFS File", click browse, select C3303IJP_tfs
6. select "CSC File", click browse, select C3303IOJPKB4.csc
7. click START.
8. press the volume down key, micro usb cable plugs into the champ and the computer
9. flasing process will automatically direct way. Wait until it finishes.
10. If HP has come out charging icon, it means that the flashing process is complete. If HP is dead do not ever pull the cord.
11. Turn on the HP, and check whether the flashing process is successful, is usually not
more than 20 minutes, depending on the computer is in use.

good luck

-----------------------------------------
OPTION 02 :

Prepare the Phone Driver for Flashing.
1. Turn OFF Phone.
2. Connect MicroUSB to Champ.
3. Press Volume Down + Lock key then connect USB Cable to PC
4. Install driver (Driver can be found on C3300K_Flash_loader_7.4.4_SSG_v0.5 folder, 52xdfu)(Manual install it using device manager)

When installed, get ready.

Re flashing
1. Run Flash loader 7.4.4_SSG_v0.5.exe

2. Click SET MODEL -> Select C3300_LIBRE_Setting_v02.mdl




6. Click Start

7. Turn OFF Phone.

8. Connect MicroUSB to Champ.

9. Press Volume Down + Lock key then connect USB Cable to PC

10. Wait the flashing finished.
(During the Flashing, your phone is off, then when the flashing is finish, you can see the your phone is charging.


11. Remove from USB. Turn on the Phone, Check if success,
-if failed, try nyu ulit ang mga steps.