API tools faq
paste
RobertBerger

bbb-lava-oe-1

RobertBerger
Jul 2nd, 2017
844
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 39.85 KB | None | 0 0
raw download clone embed print report
  1. lava-dispatcher, installed at version: 2017.6-1
  2. start: 0 validate
  3. Validating that http://192.168.42.1/lava/beagle-bone-black/uImage-multi-v7-ml.bin exists
  4. Validating that http://192.168.42.1/lava/beagle-bone-black/uImage-am335x-boneblack.dtb exists
  5. Validating that http://192.168.42.1/lava/beagle-bone-black/core-image-minimal-multi-v7-ml.tar.gz exists
  6. Specifying a type in the boot action is deprecated. Please specify the kernel type in the deploy parameters.
  7. validate duration: 0.01
  8. case: validate
  9. definition: lava
  10. result: pass
  11. start: 1 tftp-deploy (timeout 00:08:00)
  12. start: 1.1 download-retry (timeout 00:08:00)
  13. start: 1.1.1 http-download (timeout 00:08:00)
  14. No compression specified.
  15. downloading http://192.168.42.1/lava/beagle-bone-black/uImage-multi-v7-ml.bin
  16. saving as /srv/tftp/38/tftp-deploy-8D8gRZ/kernel/uImage-multi-v7-ml.bin
  17. total size: 9323832 (8MB)
  18. progress 0% (0MB)
  19. progress 5% (0MB)
  20. progress 10% (0MB)
  21. progress 15% (1MB)
  22. progress 20% (1MB)
  23. progress 25% (2MB)
  24. progress 30% (2MB)
  25. progress 35% (3MB)
  26. progress 40% (3MB)
  27. progress 45% (4MB)
  28. progress 50% (4MB)
  29. progress 55% (4MB)
  30. progress 60% (5MB)
  31. progress 65% (5MB)
  32. progress 70% (6MB)
  33. progress 75% (6MB)
  34. progress 80% (7MB)
  35. progress 85% (7MB)
  36. progress 90% (8MB)
  37. progress 95% (8MB)
  38. progress 100% (8MB)
  39. 8MB downloaded in 0.09s (102.22MB/s)
  40. end: 1.1.1 http-download (duration 00:00:00)
  41. case: http-download
  42. definition: lava
  43. duration: 0.09
  44. extra: ...
  45. level: 1.1.1
  46. result: pass
  47. end: 1.1 download-retry (duration 00:00:00)
  48. start: 1.2 download-retry (timeout 00:08:00)
  49. start: 1.2.1 http-download (timeout 00:08:00)
  50. No compression specified.
  51. downloading http://192.168.42.1/lava/beagle-bone-black/uImage-am335x-boneblack.dtb
  52. saving as /srv/tftp/38/tftp-deploy-8D8gRZ/dtb/uImage-am335x-boneblack.dtb
  53. total size: 34184 (0MB)
  54. progress 95% (0MB)
  55. progress 100% (0MB)
  56. 0MB downloaded in 0.00s (9.77MB/s)
  57. end: 1.2.1 http-download (duration 00:00:00)
  58. case: http-download
  59. definition: lava
  60. duration: 0.00
  61. extra: ...
  62. level: 1.2.1
  63. result: pass
  64. end: 1.2 download-retry (duration 00:00:00)
  65. start: 1.3 download-retry (timeout 00:08:00)
  66. start: 1.3.1 http-download (timeout 00:08:00)
  67. Using gz decompression
  68. downloading http://192.168.42.1/lava/beagle-bone-black/core-image-minimal-multi-v7-ml.tar.gz
  69. saving as /srv/tftp/38/tftp-deploy-8D8gRZ/nfsrootfs/core-image-minimal-multi-v7-ml.tar
  70. total size: 2537687 (2MB)
  71. progress 1% (0MB)
  72. progress 6% (0MB)
  73. progress 11% (0MB)
  74. progress 16% (0MB)
  75. progress 21% (0MB)
  76. progress 27% (0MB)
  77. progress 32% (0MB)
  78. progress 37% (0MB)
  79. progress 42% (1MB)
  80. progress 47% (1MB)
  81. progress 52% (1MB)
  82. progress 58% (1MB)
  83. progress 63% (1MB)
  84. progress 68% (1MB)
  85. progress 73% (1MB)
  86. progress 78% (1MB)
  87. progress 83% (2MB)
  88. progress 89% (2MB)
  89. progress 94% (2MB)
  90. progress 99% (2MB)
  91. 2MB downloaded in 0.08s (29.12MB/s)
  92. end: 1.3.1 http-download (duration 00:00:00)
  93. case: http-download
  94. definition: lava
  95. duration: 0.08
  96. extra: ...
  97. level: 1.3.1
  98. result: pass
  99. end: 1.3 download-retry (duration 00:00:00)
  100. start: 1.4 prepare-tftp-overlay (timeout 00:08:00)
  101. start: 1.4.1 extract-nfsrootfs (timeout 00:08:00)
  102. Extracted nfsroot to /var/lib/lava/dispatcher/tmp/38/extract-nfsrootfs-w9NQHd
  103. end: 1.4.1 extract-nfsrootfs (duration 00:00:00)
  104. start: 1.4.2 lava-overlay (timeout 00:08:00)
  105. [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS
  106. makedir: /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin
  107. makedir: /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/tests
  108. makedir: /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/results
  109. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-vm-groups-setup-host
  110. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-set
  111. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-run-attach
  112. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-case
  113. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-case-attach
  114. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-installed-packages
  115. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-runner
  116. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-os-build
  117. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-background-process-stop
  118. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-echo-ipv4
  119. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-shell
  120. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-add-sources
  121. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-case-metadata
  122. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-background-process-start
  123. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-add-keys
  124. Creating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-install-packages
  125. Applying distro script: distro/oe/lava-installed-packages
  126. Applying distro script: distro/oe/lava-install-packages
  127. Updating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-case
  128. Updating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-runner
  129. Updating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-lxc-device-add
  130. Updating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-test-reference
  131. Updating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-lxc-device-wait-add
  132. Updating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-target-mac
  133. Updating /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/bin/lava-target-ip
  134. start: 1.4.2.1 ssh-authorize (timeout 00:08:00)
  135. end: 1.4.2.1 ssh-authorize (duration 00:00:00)
  136. start: 1.4.2.2 lava-vland-overlay (timeout 00:08:00)
  137. skipped lava-vland-overlay
  138. end: 1.4.2.2 lava-vland-overlay (duration 00:00:00)
  139. start: 1.4.2.3 lava-multinode-overlay (timeout 00:08:00)
  140. skipped lava-multinode-overlay
  141. end: 1.4.2.3 lava-multinode-overlay (duration 00:00:00)
  142. start: 1.4.2.4 test-definition (timeout 00:08:00)
  143. Loading test definitions
  144. start: 1.4.2.4.1 git-repo-action (timeout 00:08:00)
  145. Using /lava-38 at stage 0
  146. Fetching tests from https://github.com/RobertBerger/git.linaro.org-qa-test-definitions.git
  147. Running '/usr/bin/git clone https://github.com/RobertBerger/git.linaro.org-qa-test-definitions.git /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/0/tests/0_smoke-tests'
  148. Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/0/tests/0_smoke-tests/openembedded/smoke-tests-basic-core-image-minimal.yaml
  149. uuid=38_1.4.2.4.1 testdef={'testdef_pattern': {'pattern': '(?P<test_case_id>.*-*)\\s+:\\s+(?P<result>(PASS|pass|FAIL|fail|SKIP|skip|UNKNOWN|unknown))', 'fixupdict': {'FAIL': 'fail', 'SKIP': 'skip', 'UNKNOWN': 'unknown', 'PASS': 'pass'}}}
  150. end: 1.4.2.4.1 git-repo-action (duration 00:00:08)
  151. case: git-repo-action
  152. definition: lava
  153. result: pass
  154. level: 1.4.2.4.1
  155. duration: 8.26
  156. extra: ...
  157. start: 1.4.2.4.2 test-overlay (timeout 00:07:51)
  158. end: 1.4.2.4.2 test-overlay (duration 00:00:00)
  159. case: test-overlay
  160. definition: lava
  161. result: pass
  162. level: 1.4.2.4.2
  163. duration: 0.01
  164. extra: ...
  165. start: 1.4.2.4.3 test-install-overlay (timeout 00:07:51)
  166. end: 1.4.2.4.3 test-install-overlay (duration 00:00:00)
  167. case: test-install-overlay
  168. definition: lava
  169. result: pass
  170. level: 1.4.2.4.3
  171. duration: 0.01
  172. extra: ...
  173. start: 1.4.2.4.4 test-runscript-overlay (timeout 00:07:51)
  174. runner path: /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/0/tests/0_smoke-tests test_uuid 38_1.4.2.4.1
  175. end: 1.4.2.4.4 test-runscript-overlay (duration 00:00:00)
  176. case: test-runscript-overlay
  177. definition: lava
  178. result: pass
  179. level: 1.4.2.4.4
  180. duration: 0.06
  181. extra: ...
  182. Creating lava-test-runner.conf files
  183. Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/38/lava-overlay-1i2xoS/lava-38/0 for stage 0
  184. - 0_smoke-tests
  185. end: 1.4.2.4 test-definition (duration 00:00:08)
  186. start: 1.4.2.5 compress-overlay (timeout 00:07:51)
  187. end: 1.4.2.5 compress-overlay (duration 00:00:04)
  188. start: 1.4.2.6 persistent-nfs-overlay (timeout 00:07:47)
  189. end: 1.4.2.6 persistent-nfs-overlay (duration 00:00:00)
  190. end: 1.4.2 lava-overlay (duration 00:00:13)
  191. start: 1.4.3 extract-overlay-ramdisk (timeout 00:07:47)
  192. end: 1.4.3 extract-overlay-ramdisk (duration 00:00:00)
  193. start: 1.4.4 extract-modules (timeout 00:07:47)
  194. end: 1.4.4 extract-modules (duration 00:00:00)
  195. start: 1.4.5 apply-overlay-tftp (timeout 00:07:47)
  196. Applying overlay to NFS
  197. end: 1.4.5 apply-overlay-tftp (duration 00:00:01)
  198. start: 1.4.6 configure-preseed-file (timeout 00:07:46)
  199. end: 1.4.6 configure-preseed-file (duration 00:00:00)
  200. start: 1.4.7 compress-ramdisk (timeout 00:07:46)
  201. end: 1.4.7 compress-ramdisk (duration 00:00:00)
  202. end: 1.4 prepare-tftp-overlay (duration 00:00:14)
  203. start: 1.5 lxc-add-device-action (timeout 00:07:46)
  204. No LXC device requested
  205. end: 1.5 lxc-add-device-action (duration 00:00:00)
  206. start: 1.6 deploy-device-env (timeout 00:07:46)
  207. end: 1.6 deploy-device-env (duration 00:00:00)
  208. end: 1 tftp-deploy (duration 00:00:14)
  209. start: 2 uboot-action (timeout 00:05:00)
  210. start: 2.1 uboot-from-media (timeout 00:05:00)
  211. end: 2.1 uboot-from-media (duration 00:00:00)
  212. start: 2.2 bootloader-overlay (timeout 00:05:00)
  213. Using type from the boot action as the boot-command. Declaring a kernel type in the deploy is preferred.
  214. Parsed boot commands: setenv autoload no; setenv initrd_high 0xffffffff; setenv fdt_high 0xffffffff; setenv loadkernel 'tftp 0x80200000 38/tftp-deploy-8D8gRZ/kernel/uImage-multi-v7-ml.bin'; setenv loadinitrd 'tftp - {RAMDISK}; setenv initrd_size ${filesize}'; setenv loadfdt 'tftp 0x815f0000 38/tftp-deploy-8D8gRZ/dtb/uImage-am335x-boneblack.dtb'; setenv nfsargs 'setenv bootargs console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.42.141:/var/lib/lava/dispatcher/tmp/38/extract-nfsrootfs-w9NQHd,tcp,hard,intr ip=dhcp'; setenv bootcmd 'dhcp; setenv serverip 192.168.42.141; run loadkernel; run loadinitrd; run loadfdt; run nfsargs; bootm 0x80200000 - 0x815f0000'; run bootcmd
  215. end: 2.2 bootloader-overlay (duration 00:00:00)
  216. case: bootloader-overlay
  217. definition: lava
  218. result: pass
  219. level: 2.2
  220. duration: 0.00
  221. extra: ...
  222. start: 2.3 connect-device (timeout 00:05:00)
  223. connect-device Connecting to device using '/usr/local/bin/console bbb03'
  224. end: 2.3 connect-device (duration 00:00:00)
  225. start: 2.4 uboot-retry (timeout 00:05:00)
  226. start: 2.4.1 reboot-device (timeout 00:05:00)
  227. start: 2.4.1.1 soft-reboot (timeout 00:05:00)
  228. end: 2.4.1.1 soft-reboot (duration 00:00:00)
  229. start: 2.4.1.2 pdu-reboot (timeout 00:05:00)
  230. Adjuvant pdu-reboot required
  231. nice /usr/local/bin/remote_power bbb03 cycle
  232. command output
  233. off
  234. + /usr/local/bin/eth-rly-16.sh 3 remote_power-1.res.training off
  235. Relay states (8..1): off off off off off off off off
  236. sleep 5
  237. on
  238. + /usr/local/bin/eth-rly-16.sh 3 remote_power-1.res.training on
  239. Relay states (8..1): off off off off off ON off off
  240. end: 2.4.1.2 pdu-reboot (duration 00:00:05)
  241. case: pdu-reboot
  242. definition: lava
  243. result: pass
  244. level: 2.4.1.2
  245. duration: 5.16
  246. extra: ...
  247. start: 2.4.1.3 send-reboot-command (timeout 00:04:55)
  248. Adjuvant send-reboot-command skipped
  249. end: 2.4.1.3 send-reboot-command (duration 00:00:00)
  250. start: 2.4.1.4 power-on (timeout 00:04:55)
  251. nice /usr/local/bin/remote_power bbb03 on
  252. command output
  253. on
  254. + /usr/local/bin/eth-rly-16.sh 3 remote_power-1.res.training on
  255. Relay states (8..1): off off off off off ON off off
  256. end: 2.4.1.4 power-on (duration 00:00:00)
  257. case: power-on
  258. definition: lava
  259. result: pass
  260. level: 2.4.1.4
  261. duration: 0.21
  262. extra: ...
  263. end: 2.4.1 reboot-device (duration 00:00:05)
  264. start: 2.4.2 u-boot-interrupt (timeout 00:04:55)
  265. Changing prompt to 'Hit any key to stop autoboot'
  266. u-boot-interrupt: Wait for prompt Hit any key to stop autoboot (timeout 00:05:00)
  267. + telnet conserver-1.res.training 2003
  268. Trying 192.168.42.20...
  269. Connected to conserver-1.res.training.
  270. Escape character is '^]'.
  271. U-Boot SPL 2017.05-mainline-student-v2017.05-dirty (Jul 01 2017 - 13:33:14)
  272. Trying to boot from MMC2
  273. reading u-boot.img
  274. reading u-boot.img
  275. U-Boot 2017.05-mainline-student-v2017.05-dirty (Jul 01 2017 - 13:33:14 +0200)
  276. CPU : AM335X-GP rev 2.1
  277. I2C: ready
  278. DRAM: 512 MiB
  279. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  280. Net: cpsw, usb_ether
  281.  
  282. Hit any key to stop autoboot: 2
  283. end: 2.4.2 u-boot-interrupt (duration 00:00:01)
  284. start: 2.4.3 bootloader-commands (timeout 00:04:53)
  285. Changing prompt to start interaction: U-Boot
  286. bootloader-commands: Wait for prompt U-Boot (timeout 00:05:00)
  287.  0
  288. setenv autoload no
  289. U-Boot => setenv autoload no
  290. bootloader-commands: Wait for prompt U-Boot (timeout 00:05:00)
  291. setenv autoload no
  292. setenv initrd_high 0xffffffff
  293. U-Boot => setenv initrd_high 0xffffffff
  294. bootloader-commands: Wait for prompt U-Boot (timeout 00:05:00)
  295. setenv initrd_high 0xffffffff
  296. setenv fdt_high 0xffffffff
  297. U-Boot => setenv fdt_high 0xffffffff
  298. bootloader-commands: Wait for prompt U-Boot (timeout 00:05:00)
  299. setenv fdt_high 0xffffffff
  300. setenv loadkernel 'tftp 0x80200000 38/tftp-deploy-8D8gRZ/kernel/uImage-multi-v7-ml.bin'
  301. U-Boot => setenv loadkernel 'tftp 0x80200000 38/tftp-deploy-8D8gRZ/kernel/uImage-multi-v7-ml.bin'
  302. bootloader-commands: Wait for prompt U-Boot (timeout 00:04:59)
  303. setenv loadkernel 'tftp 0x80200000 38/tftp-deploy-8D8gRZ/kernel/uImage-multi-v7-ml.bin'
  304. setenv loadinitrd 'tftp - {RAMDISK}; setenv initrd_size ${filesize}'
  305. U-Boot => setenv loadinitrd 'tftp - {RAMDISK}; setenv initrd_size ${filesize}'
  306. bootloader-commands: Wait for prompt U-Boot (timeout 00:04:59)
  307. setenv loadinitrd 'tftp - {RAMDISK}; setenv initrd_size ${filesize}'
  308. setenv loadfdt 'tftp 0x815f0000 38/tftp-deploy-8D8gRZ/dtb/uImage-am335x-boneblack.dtb'
  309. U-Boot => setenv loadfdt 'tftp 0x815f0000 38/tftp-deploy-8D8gRZ/dtb/uImage-am335x-boneblack.dtb'
  310. bootloader-commands: Wait for prompt U-Boot (timeout 00:04:59)
  311. setenv loadfdt 'tftp 0x815f0000 38/tftp-deploy-8D8gRZ/dtb/uImage-am335x-boneblack.dtb'
  312. setenv nfsargs 'setenv bootargs console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.42.141:/var/lib/lava/dispatcher/tmp/38/extract-nfsrootfs-w9NQHd,tcp,hard,intr ip=dhcp'
  313. U-Boot => setenv nfsargs 'setenv bootargs console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.42.141:/var/lib/lava/dispatcher/tmp/38/extract-nfsrootfs-w9NQHd,tcp,hard,intr ip=dhcp'
  314. bootloader-commands: Wait for prompt U-Boot (timeout 00:04:59)
  315. setenv nfsargs 'setenv bootargs console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.42.141:/var/lib/lava/dispatcher/tmp/38/extract-nfsrootfs-w9NQHd,tcp,hard,intr ip=dhcp'
  316. setenv bootcmd 'dhcp; setenv serverip 192.168.42.141; run loadkernel; run loadinitrd; run loadfdt; run nfsargs; bootm 0x80200000 - 0x815f0000'
  317. U-Boot => setenv bootcmd 'dhcp; setenv serverip 192.168.42.141; run loadkernel; run loadinitrd; run loadfdt; run nfsargs; bootm 0x80200000 - 0x815f0000'
  318. bootloader-commands: Wait for prompt U-Boot (timeout 00:04:59)
  319. setenv bootcmd 'dhcp; setenv serverip 192.168.42.141; run loadkernel; run loadinitrd; run loadfdt; run nfsargs; bootm 0x80200000 - 0x815f0000'
  320. run bootcmd
  321. U-Boot => run bootcmd
  322. Changing prompt to boot_message ['Booting Linux', 'Resetting CPU']
  323. bootloader-commands: Wait for prompt ['Booting Linux', 'Resetting CPU'] (timeout 00:04:59)
  324. run bootcmd
  325. cpsw Waiting for PHY auto negotiation to complete. done
  326. link up on port 0, speed 100, full duplex
  327. BOOTP broadcast 1
  328. BOOTP broadcast 2
  329. DHCP client bound to address 192.168.42.13 (259 ms)
  330. link up on port 0, speed 100, full duplex
  331. Using cpsw device
  332. TFTP from server 192.168.42.141; our IP address is 192.168.42.13
  333. Filename '38/tftp-deploy-8D8gRZ/kernel/uImage-multi-v7-ml.bin'.
  334. Load address: 0x80200000
  335. Loading: *#################################################################
  336. #################################################################
  337. #################################################################
  338. #################################################################
  339. #################################################################
  340. #################################################################
  341. #################################################################
  342. #################################################################
  343. #################################################################
  344. ###################################################
  345. 4.1 MiB/s
  346. done
  347. Bytes transferred = 9323832 (8e4538 hex)
  348. link up on port 0, speed 100, full duplex
  349. Using cpsw device
  350. TFTP from server 192.168.42.141; our IP address is 192.168.42.13
  351. Filename '{RAMDISK}'.
  352. Load address: 0x0
  353. Loading: *
  354. TFTP error: 'File not found' (1)
  355. Not retrying...
  356. link up on port 0, speed 100, full duplex
  357. Using cpsw device
  358. TFTP from server 192.168.42.141; our IP address is 192.168.42.13
  359. Filename '38/tftp-deploy-8D8gRZ/dtb/uImage-am335x-boneblack.dtb'.
  360. Load address: 0x815f0000
  361. Loading: *###
  362. 2.7 MiB/s
  363. done
  364. Bytes transferred = 34184 (8588 hex)
  365. ## Booting kernel from Legacy Image at 80200000 ...
  366. Image Name: Linux-4.9.27-custom-ml-debug
  367. Created: 2017-05-26 10:54:54 UTC
  368. Image Type: ARM Linux Kernel Image (no loading done) (uncompressed)
  369. Data Size: 9323768 Bytes = 8.9 MiB
  370. Load Address: 00000000
  371. Entry Point: 00000000
  372. Verifying Checksum ... OK
  373. ## Flattened Device Tree blob at 815f0000
  374. Booting using the fdt blob at 0x815f0000
  375. XIP Kernel Image (no loading done) ... OK
  376. Using Device Tree in place at 815f0000, end 815fb587
  377. Starting kernel ...
  378. U-Boot SPL 2017.05-mainline-student-v2017.05-dirty (Jul 01 2017 - 13:33:14)
  379. Trying to boot from MMC2
  380. reading u-boot.img
  381. reading u-boot.img
  382. U-Boot 2017.05-mainline-student-v2017.05-dirty (Jul 01 2017 - 13:33:14 +0200)
  383. CPU : AM335X-GP rev 2.1
  384. I2C: ready
  385. DRAM: 512 MiB
  386. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  387. Net: cpsw, usb_ether
  388. Hit any key to stop autoboot: 2  1  0
  389. bootfile: beagle-bone-black/uImage
  390. fdtfile: beagle-bone-black/uImage-am335x-boneblack.dtb
  391. link up on port 0, speed 100, full duplex
  392. Using cpsw device
  393. host 192.168.42.3 is alive
  394. link up on port 0, speed 100, full duplex
  395. Using cpsw device
  396. TFTP from server 192.168.42.3; our IP address is 192.168.42.13
  397. Filename 'beagle-bone-black/uImage'.
  398. Load address: 0x80300000
  399. Loading: *#################################################################
  400. #################################################################
  401. #################################################################
  402. #################################################################
  403. #################################################################
  404. #################################################################
  405. #################################################################
  406. #################################################################
  407. #################################################################
  408. ###################################################
  409. 3.2 MiB/s
  410. done
  411. Bytes transferred = 9323832 (8e4538 hex)
  412. link up on port 0, speed 100, full duplex
  413. Using cpsw device
  414. TFTP from server 192.168.42.3; our IP address is 192.168.42.13
  415. Filename 'beagle-bone-black/uImage-am335x-boneblack.dtb'.
  416. Load address: 0x815f0000
  417. Loading: *###
  418. 2.5 MiB/s
  419. done
  420. Bytes transferred = 34184 (8588 hex)
  421. Booting from nfs...
  422. bootargs=console=ttyO0,115200n8 ip=192.168.42.13:192.168.42.3:192.168.42.254:255.255.255.0:beagle-bone-black:eth0:off nfsroot=192.168.42.3:/opt/poky/bbb-rootfs,v3,tcp noinitrd nohlt panic=1
  423. ## Booting kernel from Legacy Image at 80300000 ...
  424. Image Name: Linux-4.9.27-custom-ml-debug
  425. Created: 2017-05-26 10:54:54 UTC
  426. Image Type: ARM Linux Kernel Image (no loading done) (uncompressed)
  427. Data Size: 9323768 Bytes = 8.9 MiB
  428. Load Address: 00000000
  429. Entry Point: 00000000
  430. Verifying Checksum ... OK
  431. ## Flattened Device Tree blob at 815f0000
  432. Booting using the fdt blob at 0x815f0000
  433. XIP Kernel Image (no loading done) ... OK
  434. Loading Device Tree to 8fff4000, end 8ffff587 ... OK
  435. Starting kernel ...
  436. [ 0.000000] Booting Linux on physical CPU 0x0
  437. [ 0.000000] Linux version 4.9.27-custom-ml-debug (@031dcdee3471) (gcc version 6.3.0 (GCC) ) #1 SMP Fri May 26 10:54:13 UTC 2017
  438. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  439. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  440. [ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
  441. [ 0.000000] efi: Getting EFI parameters from FDT:
  442. [ 0.000000] efi: UEFI not found.
  443. end: 2.4.3 bootloader-commands (duration 00:01:02)
  444. start: 2.4.4 auto-login-action (timeout 00:03:51)
  445. Using line separator: #'\n'#
  446. Waiting for the login prompt
  447. Parsing kernel messages
  448. -+\[ cut here \]-+\s+(.*\s+-+\[ end trace (\w*) \]-+),(Unhandled fault.*)
  449. ,Kernel panic - (.*) end Kernel panic,Stack:\s+(.*\s+-+\[ end trace (\w*) \]-+),ALERT! .* does not exist.\s+Dropping to a shell!,root@multi-v7-ml:,login:,Login incorrect
  450. [auto-login-action] Waiting for messages, (timeout 00:03:51)
  451. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000
  452. [ 0.000000] Memory policy: Data cache writeback
  453. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  454. [ 0.000000] AM335X ES2.1 (sgx neon)
  455. [ 0.000000] percpu: Embedded 368 pages/cpu @df847000 s1474864 r8192 d24272 u1507328
  456. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
  457. [ 0.000000] Kernel command line: console=ttyO0,115200n8 ip=192.168.42.13:192.168.42.3:192.168.42.254:255.255.255.0:beagle-bone-black:eth0:off nfsroot=192.168.42.3:/opt/poky/bbb-rootfs,v3,tcp noinitrd nohlt panic=1
  458. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  459. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  460. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  461. [ 0.000000] Memory: 417420K/522240K available (12288K kernel code, 1726K rwdata, 6188K rodata, 3072K init, 8724K bss, 39284K reserved, 65536K cma-reserved, 0K highmem)
  462. [ 0.000000] Virtual kernel memory layout:
  463. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  464. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  465. [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
  466. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  467. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  468. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  469. [ 0.000000] .text : 0xc0208000 - 0xc0f00000 (13280 kB)
  470. [ 0.000000] .init : 0xc1600000 - 0xc1900000 (3072 kB)
  471. [ 0.000000] .data : 0xc1900000 - 0xc1aafab4 (1727 kB)
  472. [ 0.000000] .bss : 0xc1ab1000 - 0xc233629c (8725 kB)
  473. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  474. [ 0.000000] Running RCU self tests
  475. [ 0.000000] Hierarchical RCU implementation.
  476. [ 0.000000] RCU lockdep checking is enabled.
  477. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  478. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
  479. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
  480. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  481. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  482. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  483. [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  484. [ 0.000048] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  485. [ 0.000116] OMAP clocksource: timer1 at 24000000 Hz
  486. [ 0.005207] clocksource_probe: no matching clocksources found
  487. [ 0.006445] Console: colour dummy device 80x30
  488. [ 0.006541] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  489. [ 0.006554] ... MAX_LOCKDEP_SUBCLASSES: 8
  490. [ 0.006564] ... MAX_LOCK_DEPTH: 48
  491. [ 0.006575] ... MAX_LOCKDEP_KEYS: 8191
  492. [ 0.006585] ... CLASSHASH_SIZE: 4096
  493. [ 0.006595] ... MAX_LOCKDEP_ENTRIES: 32768
  494. [ 0.006605] ... MAX_LOCKDEP_CHAINS: 65536
  495. [ 0.006616] ... CHAINHASH_SIZE: 32768
  496. [ 0.006626] memory used by lock dependency info: 5423 kB
  497. [ 0.006636] per task-struct memory footprint: 2304 bytes
  498. [ 0.006722] Calibrating delay loop... 987.95 BogoMIPS (lpj=2469888)
  499. [ 0.062515] pid_max: default: 32768 minimum: 301
  500. [ 0.063394] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  501. [ 0.063415] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  502. [ 0.069339] CPU: Testing write buffer coherency: ok
  503. [ 0.069600] ftrace: allocating 40304 entries in 119 pages
  504. [ 0.186318] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  505. [ 0.186412] Setting up static identity map for 0x80300000 - 0x80300098
  506. [ 0.206374] EFI services will not be available.
  507. [ 0.208197] Brought up 1 CPUs
  508. [ 0.208226] SMP: Total of 1 processors activated (987.95 BogoMIPS).
  509. [ 0.208238] CPU: All CPU(s) started in SVC mode.
  510. [ 0.212221] devtmpfs: initialized
  511. [ 0.284815] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  512. [ 0.286600] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
  513. [ 0.286785] futex hash table entries: 256 (order: 2, 16384 bytes)
  514. [ 0.292207] pinctrl core: initialized pinctrl subsystem
  515. [ 0.303142] NET: Registered protocol family 16
  516. [ 0.313678] DMA: preallocated 256 KiB pool for atomic coherent allocations
  517. [ 0.419707] omap_hwmod: debugss: _wait_target_disable failed
  518. [ 0.484031] cpuidle: using governor menu
  519. [ 0.522230] OMAP GPIO hardware version 0.1
  520. [ 0.607353] No ATAGs?
  521. [ 0.607385] hw-breakpoint: debug architecture 0x4 unsupported.
  522. [ 0.608346] omap4_sram_init:Unable to allocate sram needed to handle errata I688
  523. [ 0.608377] omap4_sram_init:Unable to get sram pool needed to handle errata I688
  524. [ 0.626590] Serial: AMBA PL011 UART driver
  525. [ 0.745017] edma 49000000.edma: TI EDMA DMA engine driver
  526. [ 0.757000] vgaarb: loaded
  527. [ 0.761130] SCSI subsystem initialized
  528. [ 0.764175] usbcore: registered new interface driver usbfs
  529. [ 0.764517] usbcore: registered new interface driver hub
  530. [ 0.764810] usbcore: registered new device driver usb
  531. [ 0.767448] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
  532. [ 0.767825] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
  533. [ 0.769930] pps_core: LinuxPPS API ver. 1 registered
  534. [ 0.769947] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  535. [ 0.770033] PTP clock support registered
  536. [ 0.770695] EDAC MC: Ver: 3.0.0
  537. [ 0.785336] clocksource: Switched to clocksource timer1
  538. [ 1.278382] NET: Registered protocol family 2
  539. [ 1.281578] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  540. [ 1.282435] TCP bind hash table entries: 4096 (order: 5, 180224 bytes)
  541. [ 1.284268] TCP: Hash tables configured (established 4096 bind 4096)
  542. [ 1.284526] UDP hash table entries: 256 (order: 2, 24576 bytes)
  543. [ 1.284788] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
  544. [ 1.286311] NET: Registered protocol family 1
  545. [ 1.288639] RPC: Registered named UNIX socket transport module.
  546. [ 1.288669] RPC: Registered udp transport module.
  547. [ 1.288684] RPC: Registered tcp transport module.
  548. [ 1.288697] RPC: Registered tcp NFSv4.1 backchannel transport module.
  549. [ 1.293638] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  550. [ 1.309217] workingset: timestamp_bits=30 max_order=17 bucket_order=0
  551. [ 1.350533] random: fast init done
  552. [ 1.381999] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  553. [ 1.388192] NFS: Registering the id_resolver key type
  554. [ 1.388666] Key type id_resolver registered
  555. [ 1.388690] Key type id_legacy registered
  556. [ 1.388959] ntfs: driver 2.1.32 [Flags: R/O].
  557. [ 1.401509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  558. [ 1.401737] io scheduler noop registered
  559. [ 1.401758] io scheduler deadline registered
  560. [ 1.403953] io scheduler cfq registered (default)
  561. [ 1.419774] libphy: mdio_driver_register: phy-bcm-ns2-pci
  562. [ 1.424554] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  563. [ 1.827712] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  564. [ 1.841743] SuperH (H)SCI(F) driver initialized
  565. [ 1.844925] msm_serial: driver initialized
  566. [ 1.846119] omap_uart 44e09000.serial: no wakeirq for uart0
  567. [ 1.847023] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a OMAP UART0
  568. [ 2.613550] console [ttyO0] enabled
  569. [ 2.620009] STMicroelectronics ASC driver initialized
  570. [ 2.633635] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
  571. [ 2.646974] [drm] Initialized
  572. [ 2.729603] brd: module loaded
  573. [ 2.772562] loop: module loaded
  574. [ 2.810863] libphy: Fixed MDIO Bus: probed
  575. [ 2.821788] CAN device driver interface
  576. [ 2.832097] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  577. [ 2.838281] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  578. [ 2.844889] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  579. [ 2.852242] igb: Copyright (c) 2007-2014 Intel Corporation.
  580. [ 2.930480] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  581. [ 2.936954] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  582. [ 2.949422] libphy: 4a101000.mdio: probed
  583. [ 2.953927] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  584. [ 2.969577] cpsw 4a100000.ethernet: Detected MACID = 78:a5:04:c9:fd:9b
  585. [ 2.986443] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  586. [ 2.994745] usbcore: registered new interface driver pegasus
  587. [ 3.001202] usbcore: registered new interface driver asix
  588. [ 3.007144] usbcore: registered new interface driver ax88179_178a
  589. [ 3.013821] usbcore: registered new interface driver cdc_ether
  590. [ 3.020393] usbcore: registered new interface driver smsc75xx
  591. [ 3.026779] usbcore: registered new interface driver smsc95xx
  592. [ 3.033058] usbcore: registered new interface driver net1080
  593. [ 3.039241] usbcore: registered new interface driver cdc_subset
  594. [ 3.046153] usbcore: registered new interface driver zaurus
  595. [ 3.052424] usbcore: registered new interface driver cdc_ncm
  596. [ 3.064840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  597. [ 3.071882] ehci-pci: EHCI PCI platform driver
  598. [ 3.076843] ehci-platform: EHCI generic platform driver
  599. [ 3.083008] ehci-orion: EHCI orion driver
  600. [ 3.087823] SPEAr-ehci: EHCI SPEAr driver
  601. [ 3.092610] ehci-st: EHCI STMicroelectronics driver
  602. [ 3.098297] ehci-exynos: EHCI EXYNOS driver
  603. [ 3.103261] ehci-atmel: EHCI Atmel driver
  604. [ 3.108014] tegra-ehci: Tegra EHCI driver
  605. [ 3.112794] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  606. [ 3.119390] ohci-pci: OHCI PCI platform driver
  607. [ 3.124344] ohci-platform: OHCI generic platform driver
  608. [ 3.130533] ohci-omap3: OHCI OMAP3 driver
  609. [ 3.135377] SPEAr-ohci: OHCI SPEAr driver
  610. [ 3.140131] ohci-st: OHCI STMicroelectronics driver
  611. [ 3.145837] ohci-atmel: OHCI Atmel driver
  612. [ 3.152442] usbcore: registered new interface driver usb-storage
  613. [ 3.165924] mousedev: PS/2 mouse device common for all mice
  614. [ 3.185109] i2c /dev entries driver
  615. [ 3.232112] sdhci: Secure Digital Host Controller Interface driver
  616. [ 3.238688] sdhci: Copyright(c) Pierre Ossman
  617. [ 3.247328] omap_hsmmc 48060000.mmc: Got CD GPIO
  618. [ 3.338063] Synopsys Designware Multimedia Card Interface Driver
  619. [ 3.348902] sdhci-pltfm: SDHCI platform and OF driver helper
  620. [ 3.372694] ledtrig-cpu: registered to indicate activity on CPUs
  621. [ 3.381313] usbcore: registered new interface driver usbhid
  622. [ 3.387323] usbhid: USB HID core driver
  623. [ 3.404495] oprofile: using arm/armv7
  624. [ 3.413703] NET: Registered protocol family 10
  625. [ 3.425709] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  626. [ 3.438261] NET: Registered protocol family 17
  627. [ 3.446037] can: controller area network core (rev 20120528 abi 9)
  628. [ 3.453136] NET: Registered protocol family 29
  629. [ 3.457912] can: raw protocol (rev 20120528)
  630. [ 3.462621] can: broadcast manager protocol (rev 20161123 t)
  631. [ 3.468783] can: netlink gateway (rev 20130117) max_hops=1
  632. [ 3.477327] Key type dns_resolver registered
  633. [ 3.482750] omap_voltage_late_init: Voltage driver support not added
  634. [ 3.491071] ThumbEE CPU extension supported.
  635. [ 3.495863] Registering SWP/SWPB emulation handler
  636. [ 3.506103] registered taskstats version 1
  637. [ 3.551381] mmc0: host does not support reading read-only switch, assuming write-enable
  638. [ 3.573565] mmc0: new high speed SDHC card at address 59b4
  639. [ 3.583340] mmc1: new high speed MMC card at address 0001
  640. [ 3.596571] mmcblk0: mmc0:59b4 USD 15.0 GiB
  641. [ 3.605631] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
  642. [ 3.615424] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
  643. [ 3.618532] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
  644. [ 3.628113] mmcblk1: p1 p2
  645. [ 3.675071] mmcblk0: p1
  646. [ 3.695669] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  647. [ 3.705673] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  648. [ 3.714510] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  649. [ 3.826739] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
  650. [ 3.845064] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1000000 KHz
  651. [ 3.853409] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 1000000000 (-34)
  652. [ 3.869807] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 720000 KHz
  653. [ 3.884464] hctosys: unable to open rtc device (rtc0)
  654. [ 3.914923] net eth0: initializing cpsw version 1.12 (0)
  655. [ 3.996208] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
  656. [ 4.018516] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  657. [ 6.076831] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  658. [ 6.085868] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  659. [ 6.105714] IP-Config: Complete:
  660. [ 6.109196] device=eth0, hwaddr=78:a5:04:c9:fd:9b, ipaddr=192.168.42.13, mask=255.255.255.0, gw=192.168.42.254
  661. [ 6.120762] host=beagle-bone-black, domain=, nis-domain=(none)
  662. [ 6.127509] bootserver=192.168.42.3, rootserver=192.168.42.3, rootpath=
  663. [ 6.284149] VFS: Mounted root (nfs filesystem) readonly on device 0:14.
  664. [ 6.302311] devtmpfs: mounted
  665. [ 6.331076] Freeing unused kernel memory: 3072K (c1600000 - c1900000)
  666. INIT: version 2.88 booting
  667. Error opening /dev/fb0: No such file or directory
  668. Starting udev
  669. udev: Not using udev cache because of changes detected in the following files:
  670. udev: /proc/version /proc/cmdline /proc/devices
  671. udev: lib/udev/rules.d/* etc/udev/rules.d/*
  672. udev: The udev cache will be regenerated. To identify the detected changes,
  673. udev: compare the cached sysconf at /etc/udev/cache.data
  674. udev: against the current sysconf at /dev/shm/udev.cache
  675. [ 9.958818] udevd[111]: starting version 3.2.1
  676. [ 10.475198] udevd[112]: starting eudev-3.2.1
  677. [ 15.183034] random: crng init done
  678. [ 26.926716] EXT4-fs (mmcblk0p1): recovery complete
  679. [ 27.017546] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  680. [ 27.879272] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  681. [ 28.405559] EXT4-fs (mmcblk1p2): recovery complete
  682. [ 28.456106] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  683. Populating dev cache
  684. ALSA: Restoring mixer settings...
  685. /usr/sbin/alsactl: load_state:1735: No soundcards found...
  686. hwclock: can't open '/dev/misc/rtc': No such file or directory
  687. Mon May 29 15:31:45 UTC 2017
  688. hwclock: can't open '/dev/misc/rtc': No such file or directory
  689. INIT: Entering runlevel: 3
  690. Configuring network interfaces... ifup skipped for nfsroot interface eth0
  691. run-parts: /etc/network/if-pre-up.d/nfsroot: exit status 1
  692. Starting system message bus: dbus.
  693. Starting Connection Manager
  694. Starting OpenBSD Secure Shell server: sshd
  695. done.
  696. Starting rpcbind daemon...done.
  697. Starting advanced power management daemon: No APM support in kernel
  698. (failed.)
  699. Starting atd: OK
  700. Starting bluetooth
  701. bluetoothd
  702. hwclock: can't open '/dev/misc/rtc': No such file or directory
  703. Starting syslogd/klogd: done
  704. [ 47.531181] Bluetooth: Core ver 2.22
  705. [ 47.558827] NET: Registered protocol family 31
  706. [ 47.558839] Bluetooth: HCI device and connection manager initialized
  707. [ 47.559557] Bluetooth: HCI socket layer initialized
  708. [ 47.559626] Bluetooth: L2CAP socket layer initialized
  709. [ 47.561306] Bluetooth: SCO socket layer initialized
  710. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
  711. Starting Telephony daemon
  712. No makedumpfile found.
  713. Starting Linux NFC daemon
  714. Starting crond: OK
  715. Starting tcf-agent: OK
  716. Poky (Yocto Project Reference Distro) 2.3 multi-v7-ml /dev/console
  717. Matched prompt #6: login:
  718. Sending username root
  719. root
  720. multi-v7-ml login: root
  721. auto-login-action: Wait for prompt ['root@multi-v7-ml:', 'Login incorrect', 'Login timed out'] (timeout 00:03:00)
  722. root
  723. Setting shell prompt(s) to ['root@multi-v7-ml:', 'Login incorrect', 'Login timed out', 'lava-test: # ']
  724. export PS1="lava-test: # "
  725. root@multi-v7-ml:~# export PS1=\"lava-test: # \"
  726. end: 2.4.4 auto-login-action (duration 00:00:53)
  727. case: auto-login-action
  728. definition: lava
  729. result: pass
  730. level: 2.4.4
  731. duration: 52.97
  732. extra: ...
  733. start: 2.4.5 expect-shell-connection (timeout 00:02:58)
  734. expect-shell-connection: Wait for prompt ['root@multi-v7-ml:', 'Login incorrect', 'Login timed out', 'lava-test: # '] (timeout 00:05:00)
  735. end: 2.4.5 expect-shell-connection (duration 00:00:00)
  736. start: 2.4.6 export-device-env (timeout 00:02:58)
  737. end: 2.4.6 export-device-env (duration 00:00:00)
  738. end: 2.4 uboot-retry (duration 00:02:02)
  739. end: 2 uboot-action (duration 00:02:02)
  740. start: 3 lava-test-retry (timeout 00:05:00)
  741. start: 3.1 lava-test-shell (timeout 00:05:00)
  742. #
  743. export PS1=\"lava-test: # \"#
  744. lava-test-shell: Wait for prompt ['root@multi-v7-ml:', 'Login incorrect', 'Login timed out', 'lava-test: # '] (timeout 00:05:00)
  745. Using /lava-38
  746. ls -l /lava-38/
  747. lava-test: # ls -l /lava-38/
  748. export SHELL=/bin/sh
  749. export SHELL=/bin/sh
  750. /lava-38/bin/lava-test-runner /lava-38/0
  751. /lava-38/bin/lava-test-runner /lava-38/0
  752. Test shell timeout: 10s (minimum of the action and connection timeout)
  753. #
  754. lava-test: # ls -l /lava-38/
  755. export SHELL=/bin/sh
  756. /lava-38/bin/lava-test-runner /lava-38/0ls: cannot access '/lava-38/': No such file or directory
  757. lava-test: # export SHELL=/bin/sh
  758. lava-test: # /lava-38/bin/lava-test-runner /lava-38/0
  759. -sh: /lava-38/bin/lava-test-runner: No such file or directory
  760. lava-test-shell timed out after 299 seconds
  761. end: 3.1 lava-test-shell (duration 00:04:59)
  762. lava-test-retry failed: 1 of 1 attempts. 'lava-test-shell timed out after 299 seconds'
  763. lava-test-shell timed out after 299 seconds
  764. end: 3 lava-test-retry (duration 00:04:59)
  765. Cleaning after the job
  766. Cleaning up download directory: /srv/tftp/38/tftp-deploy-8D8gRZ/kernel
  767. Cleaning up download directory: /srv/tftp/38/tftp-deploy-8D8gRZ/dtb
  768. Cleaning up download directory: /srv/tftp/38/tftp-deploy-8D8gRZ/nfsrootfs
  769. start: 4.1 power-off (timeout 00:00:05)
  770. nice /usr/local/bin/remote_power bbb03 off
  771. command output
  772. off
  773. + /usr/local/bin/eth-rly-16.sh 3 remote_power-1.res.training off
  774. Relay states (8..1): off off off off off off off off
  775. end: 4.1 power-off (duration 00:00:00)
  776. case: power-off
  777. definition: lava
  778. result: pass
  779. level: 4.1
  780. duration: 0.13
  781. extra: ...
  782. Override tmp directory removed at /srv/tftp/38
  783. Root tmp directory removed at /var/lib/lava/dispatcher/tmp/38
  784. case: job
  785. definition: lava
  786. error_type: Job
  787. error_msg: lava-test-shell timed out after 299 seconds
  788. result: fail
  789. JobError: Your job cannot terminate cleanly.
  790. Top of page
  791. Please read the triage guidelines for help on debugging failures in the test job, test definitions or in individual test cases.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!