Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2021.10 (Oct 31 2023 - 19:41:27 +0800)
- LPDDR4: 8G version: g8ad50857.
- Trying to boot from SPI
- OpenSBI v1.2
- ____ _____ ____ _____
- / __ \ / ____| _ \_ _|
- | | | |_ __ ___ _ __ | (___ | |_) || |
- | | | | '_ \ / _ \ '_ \ \___ \| _ < | |
- | |__| | |_) | __/ | | |____) | |_) || |_
- \____/| .__/ \___|_| |_|_____/|___/_____|
- | |
- |_|
- Platform Name : StarFive VisionFive V2
- Platform Features : medeleg
- Platform HART Count : 5
- Platform IPI Device : aclint-mswi
- Platform Timer Device : aclint-mtimer @ 4000000Hz
- Platform Console Device : uart8250
- Platform HSM Device : ---
- Platform PMU Device : ---
- Platform Reboot Device : pm-reset
- Platform Shutdown Device : pm-reset
- Platform Suspend Device : ---
- Firmware Base : 0x40000000
- Firmware Size : 392 KB
- Firmware RW Offset : 0x40000
- Runtime SBI Version : 1.0
- Domain0 Name : root
- Domain0 Boot HART : 1
- Domain0 HARTs : 0*,1*,2*,3*,4*
- Domain0 Region00 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
- Domain0 Region01 : 0x0000000040000000-0x000000004003ffff M: (R,X) S/U: ()
- Domain0 Region02 : 0x0000000040040000-0x000000004007ffff M: (R,W) S/U: ()
- Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff M: (R,W,X) S/U: (R,W,X)
- Domain0 Next Address : 0x0000000040200000
- Domain0 Next Arg1 : 0x0000000042200000
- Domain0 Next Mode : S-mode
- Domain0 SysReset : yes
- Domain0 SysSuspend : yes
- Boot HART ID : 1
- Boot HART Domain : root
- Boot HART Priv Version : v1.11
- Boot HART Base ISA : rv64imafdcbx
- Boot HART ISA Extensions : none
- Boot HART PMP Count : 8
- Boot HART PMP Granularity : 4096
- Boot HART PMP Address Bits: 34
- Boot HART MHPM Count : 2
- Boot HART MIDELEG : 0x0000000000000222
- Boot HART MEDELEG : 0x000000000000b109
- U-Boot 2021.10 (Oct 31 2023 - 19:41:27 +0800), Build: jenkins-github_visionfive2-19
- CPU: rv64imacu_zba_zbb
- Model: StarFive VisionFive V2
- DRAM: 8 GiB
- MMC: sdio0@16010000: 0, sdio1@16020000: 1
- Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- OK
- StarFive EEPROM format v2
- --------EEPROM INFO--------
- Vendor : StarFive Technology Co., Ltd.
- Product full SN: VF7110B1-2253-D008E000-00002550
- data version: 0x2
- PCB revision: 0xb2
- BOM revision: A
- Ethernet MAC0 address: 6c:cf:39:00:35:b5
- Ethernet MAC1 address: 6c:cf:39:00:35:b6
- --------EEPROM INFO--------
- In: serial
- Out: serial
- Err: serial
- Model: StarFive VisionFive V2
- Net: eth0: ethernet@16030000, eth1: ethernet@16040000
- switch to partitions #0, OK
- mmc1 is current device
- found device 1
- bootmode flash device 1
- Failed to load 'uEnv.txt'
- Can't set block device
- Hit any key to stop autoboot: 0
- Failed to load 'vf2_uEnv.txt'
- Importing environment from mmc1 ...
- ## Warning: Input data exceeds 1048576 bytes - truncated
- ## Info: input data size = 1048578 = 0x100002
- ## Error: "boot2" not defined
- Failed to load '/uEnv.txt'
- ## Warning: defaulting to text format
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:3...
- libfdt fdt_check_header(): FDT_ERR_BADMAGIC
- Card did not respond to voltage select! : -110
- ** Unable to read file ubootefi.var **
- Failed to load EFI variables
- Scanning mmc 1:4...
- libfdt fdt_check_header(): FDT_ERR_BADMAGIC
- starfive_pcie pcie@2B000000: Port link up.
- starfive_pcie pcie@2B000000: Starfive PCIe bus probed.
- PCI: Failed autoconfig bar 10
- starfive_pcie pcie@2C000000: Port link down.
- starfive_pcie pcie@2C000000: Starfive PCIe bus probed.
- PCI: Failed autoconfig bar 10
- ethernet@16030000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement