API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 15th, 2018
50
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.54 KB | None | 0 0
raw download clone embed print report
  1.  
  2. DEBUG: le_wifiClient_GetFirstAccessPoint ERRORroot@swi-mdm9x15:~# dmesg
  3. [ 0.000000] Kernel is starting...
  4. [ 0.000000] Booting Linux on physical CPU 0x0
  5. [ 0.000000] Initializing cgroup subsys cpuset
  6. [ 0.000000] Initializing cgroup subsys cpu
  7. [ 0.000000] Initializing cgroup subsys cpuacct
  8. [ 0.000000] Linux version 3.14.29ltsi-961ca71325_ed9f616cc8 (gsmbuild@CARMD-EV-FRMWR1) (gcc version 4.9.1 (GCC) ) #2 PREEMPT Wed Nov 29 20:54:01 PST 2017
  9. [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  10. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  11. [ 0.000000] Machine model: QCT MSM9615 CDP
  12. [ 0.000000] memory pool 3 (start 4ff00000 size 100000) initialized
  13. [ 0.000000] Memory policy: Data cache writeback
  14. [ 0.000000] L310 cache controller enabled
  15. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00540000, Cache size: 262144 B
  16. [ 0.000000] socinfo_init: v7, id=106, ver=3.0, raw_id=1760, raw_ver=1760, hw_plat=0, hw_plat_ver=65536
  17. [ 0.000000] accessory_chip=0, hw_plat_subtype=0, pmic_model=19, pmic_die_revision=3
  18. [ 0.000000] On node 0 totalpages: 41216
  19. [ 0.000000] free_area_init_node: node 0, pgdat c0aafd64, node_mem_map cf507000
  20. [ 0.000000] Normal zone: 496 pages used for memmap
  21. [ 0.000000] Normal zone: 0 pages reserved
  22. [ 0.000000] Normal zone: 41216 pages, LIFO batch:7
  23. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  24. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  25. [ 0.000000] pcpu-alloc: [0] 0
  26. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40720
  27. [ 0.000000] Kernel command line: console=ttyHSL0,115200 console=ttyHSL1,115200 fudge_ro_rootfs=true rootfs_ro=true mtdparts=msm_nand:0x00100000@0x051c0000(bootloader),0x01400000(kernel),0x03140000(rootfs),0x02780000(user0),0x08b80000(user1),0x00500000(user2),0x00200000(user3) androidboot.serialno=MDM9615 lkversion=SWI9X15Y_07.12.14.00 androidboot.baseband=msm
  28. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  31. [ 0.000000] allocated 507904 bytes of page_cgroup
  32. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  33. [ 0.000000] Memory: 150452K/164864K available (6775K kernel code, 632K rwdata, 2260K rodata, 1370K init, 1268K bss, 14412K reserved, 0K highmem)
  34. [ 0.000000] Virtual kernel memory layout:
  35. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  36. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  37. [ 0.000000] vmalloc : 0xd0000000 - 0xff000000 ( 752 MB)
  38. [ 0.000000] lowmem : 0xc0000000 - 0xcf800000 ( 248 MB)
  39. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  40. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  41. [ 0.000000] .text : 0xc0008000 - 0xc08dafc4 (9036 kB)
  42. [ 0.000000] .init : 0xc08db000 - 0xc0a3189c (1371 kB)
  43. [ 0.000000] .data : 0xc0a32000 - 0xc0ad019c ( 633 kB)
  44. [ 0.000000] .bss : 0xc0ad019c - 0xc0c0d53c (1269 kB)
  45. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  46. [ 0.000000] Preemptible hierarchical RCU implementation.
  47. [ 0.000000] NR_IRQS:681
  48. [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 65542000541696ns
  49. [ 0.000610] Console: colour dummy device 80x30
  50. [ 0.000701] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
  51. [ 0.060491] pid_max: default: 32768 minimum: 301
  52. [ 0.060949] Security Framework initialized
  53. [ 0.061040] Smack: Initializing.
  54. [ 0.061071] Smack: IPv6 port labeling enabled.
  55. [ 0.061468] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  56. [ 0.061498] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  57. [ 0.063268] Initializing cgroup subsys debug
  58. [ 0.063299] Initializing cgroup subsys memory
  59. [ 0.063390] Initializing cgroup subsys devices
  60. [ 0.063390] Initializing cgroup subsys freezer
  61. [ 0.063421] Initializing cgroup subsys net_cls
  62. [ 0.063451] Initializing cgroup subsys blkio
  63. [ 0.063512] CPU: Testing write buffer coherency: ok
  64. [ 0.063604] ftrace: allocating 22892 entries in 68 pages
  65. [ 0.145551] Setting up static identity map for 0x40e208c0 - 0x40e20918
  66. [ 0.168777] devtmpfs: initialized
  67. [ 0.178116] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  68. [ 0.180772] regulator-dummy: no parameters
  69. [ 0.181352] NET: Registered protocol family 16
  70. [ 0.182511] DMA: preallocated 256 KiB pool for atomic coherent allocations
  71. [ 0.182786] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  72. [ 0.182908] gpiochip_add: registered GPIOs 0 to 87 on device: msmgpio
  73. [ 0.183427] ->gpioRI = 0
  74. [ 0.183457] ->gpioDTR = 0
  75. [ 0.183457] ->gpioDCD = 0
  76. [ 0.183488] ->gpioDSR = 0
  77. [ 0.183518] gpio_sync_ri: RI owner is Modem
  78. [ 0.183549] ->gpio16 = 0
  79. [ 0.183549] ->gpio17 = 0
  80. [ 0.183580] ->gpio18 = 0
  81. [ 0.183580] ->gpio19 = 0
  82. [ 0.184404] msm_serial_hsl_init: driver initialized
  83. [ 0.185014] cpuidle: using governor ladder
  84. [ 0.185045] cpuidle: using governor menu
  85. [ 0.185960] msm_rpm_init: RPM firmware 3.0.16842958
  86. [ 0.186235] gpio_cf3_low_power_reset_toggle: Setting up LowPower_RESET pin toggle timer
  87. [ 0.186265] unmatched machine ID in register_i2c_devices
  88. [ 0.186296] wl18xx board initialization done
  89. [ 0.186784] 8018_s1: 500 <--> 1150 mV at 1150 mV normal idle
  90. [ 0.187211] 8018_s2: 1225 <--> 1300 mV at 1300 mV normal idle
  91. [ 0.188127] 8018_s3: 1800 mV normal idle
  92. [ 0.188646] 8018_s4: 2100 <--> 2200 mV at 2200 mV normal idle
  93. [ 0.189470] 8018_s5: 1350 mV normal idle
  94. [ 0.190386] 8018_l2: 1800 mV normal idle
  95. [ 0.191271] 8018_l3: 1800 mV normal idle
  96. [ 0.191698] 8018_l4: 3300 mV normal idle
  97. [ 0.192095] 8018_l5: 2850 mV normal idle
  98. [ 0.192491] 8018_l6: 1800 <--> 2850 mV at 2850 mV normal idle
  99. [ 0.192888] 8018_l7: 1850 <--> 1900 mV at 1900 mV normal idle
  100. [ 0.193010] 8018_l7: supplied by 8018_s4
  101. [ 0.193377] 8018_l8: 1200 mV normal idle
  102. [ 0.193468] 8018_l8: supplied by 8018_s3
  103. [ 0.193865] 8018_l9: 750 <--> 1150 mV at 1150 mV normal idle
  104. [ 0.193956] 8018_l9: supplied by 8018_s5
  105. [ 0.194353] 8018_l10: 1050 mV normal idle
  106. [ 0.194445] 8018_l10: supplied by 8018_s5
  107. [ 0.194811] 8018_l11: 1050 mV normal idle
  108. [ 0.194903] 8018_l11: supplied by 8018_s5
  109. [ 0.195391] 8018_l12: 1050 mV normal idle
  110. [ 0.195482] 8018_l12: supplied by 8018_s5
  111. [ 0.195910] 8018_l13: 1850 <--> 2950 mV at 2950 mV normal idle
  112. [ 0.196337] 8018_l14: 2850 mV normal idle
  113. [ 0.196703] 8018_lvs1: no parameters
  114. [ 0.196764] 8018_lvs1: supplied by 8018_s3
  115. [ 0.197161] vdd_dig_corner: 0 <--> 0 mV at 0 mV
  116. [ 0.204455] ext_2p95v: no parameters
  117. [ 0.204639] gpio_vreg_probe: id=18, name=ext_2p95v, gpio=18, gpio_label=ext_2p95_en
  118. [ 0.205157] pm8018_probe: PMIC revision 1: F3
  119. [ 0.205188] pm8018_probe: PMIC revision 2: 08
  120. [ 0.205188] pm8018_probe: PMIC version: PM8018 rev 2.1
  121. [ 0.205218] pm8018_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  122. [ 0.206653] gpiochip_add: registered GPIOs 88 to 93 on device: pm-gpio
  123. [ 0.206745] pm_gpio_probe: OK: base=88, ngpio=6
  124. [ 0.207263] gpiochip_add: registered GPIOs 94 to 99 on device: pm8xxx-mpp
  125. [ 0.207294] pm8xxx_mpp_probe: OK: base=94, ngpio=6
  126. [ 0.209430] msm_serial_hsl_probe: ttyHSL0 is disabled.
  127. [ 0.209491] msm_serial_hsl: probe of msm_serial_hsl.0 failed with error -1
  128. [ 0.209949] msm_serial_hsl_probe: ttyHSL1 is reserved for CONSOLE service.
  129. [ 0.209949] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
  130. [ 0.210254] msm_serial_hsl.1: ttyHSL1 at MMIO 0x16440000 (irq = 186, base_baud = 460800) is a MSM
  131. [ 0.210376] msm_hsl_console_setup: console setup on port #1
  132. [ 0.314603] gpio_cf3_low_power_reset_timer_callback: LowPower_RESET pin toggled high
  133. [ 0.314603] gpio_cf3_low_power_reset_timer_callback: LowPower_RESET pin toggle timer deleted
  134. [ 0.849290] console [ttyHSL1] enabled
  135. [ 0.864703] cpufreq_table_init: CPU: 4 scaling frequencies supported.
  136. [ 0.870624] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
  137. [ 0.879139] hw-breakpoint: CPU 0 failed to disable vector catch
  138. [ 0.885701] socinfo_init_dev: device_register fail (-22)
  139. [ 0.892965] sps:REVISION of BAM 0xd0060000 is 0x5.
  140. [ 0.896963] sps:BAM 0x12244000 is registered.
  141. [ 0.901266] sps:sps is ready.<6>[ 0.940851] bio: create slab <bio-0> at 0
  142. [ 0.945673] ION heap vmalloc created
  143. [ 0.948390] ION heap iommu created
  144. [ 0.951655] ION heap audio created at 4ff01000 with size af000
  145. [ 0.958156] pm8xxx_pwm_probe: OK
  146. [ 0.960781] swimcu_i2c_init: start
  147. [ 0.964077] swimcu_i2c_probe: start 1
  148. [ 0.967678] swimcu_device_init: start 0x0
  149. [ 0.971677] register_sierra_gpio_wake_notifier
  150. [ 0.976468] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187
  151. [ 0.982755] qup_i2c qup_i2c.0: I2C slave addr:0x3a not connected
  152. [ 1.034610] swimcu_gpio_retrieve 0
  153. [ 1.037082] swimcu_pm_sysfs_init: success func 1
  154. [ 1.041934] swimcu_pm_sysfs_init: success func 2
  155. [ 1.046787] gpiochip_add: registered GPIOs 100 to 107 on device: swimcu
  156. [ 1.051548] swimcu_device_init: start 0x7f
  157. [ 1.060552] swimcu_device_init: success
  158. [ 1.063360] swimcu_set_fault_mask: 0x100, cnt 1
  159. [ 1.067907] swimcu reset_recovery: complete
  160. [ 1.072028] swimcu_set_reset_source: 0x82
  161. [ 1.076026] swimcu_device_init: success
  162. [ 1.080054] GPIOs are not in Slimbus mode
  163. [ 1.083869] msm_slim_ctrl: probe of msm_slim_ctrl.1 failed with error -5
  164. [ 1.091286] usbcore: registered new interface driver usbfs
  165. [ 1.096108] usbcore: registered new interface driver hub
  166. [ 1.101571] usbcore: registered new device driver usb
  167. [ 1.107157] Advanced Linux Sound Architecture Driver Initialized.
  168. [ 1.113596] NetLabel: Initializing
  169. [ 1.115977] NetLabel: domain hash size = 128
  170. [ 1.120311] NetLabel: protocols = UNLABELED CIPSOv4
  171. [ 1.125408] NetLabel: unlabeled traffic allowed by default
  172. [ 1.131878] Switched to clocksource gp_timer
  173. [ 1.198168] NET: Registered protocol family 2
  174. [ 1.203540] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  175. [ 1.209491] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  176. [ 1.215901] TCP: Hash tables configured (established 2048 bind 2048)
  177. [ 1.222249] TCP: reno registered
  178. [ 1.225362] UDP hash table entries: 256 (order: 0, 4096 bytes)
  179. [ 1.231191] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  180. [ 1.392369] smem_find(9, 464): wrong size 912
  181. [ 1.395696] get_nand_partitions: no flash partition table in shared memory
  182. [ 1.402655] Notify: smsm init
  183. [ 1.423470] NET: Registered protocol family 27
  184. [ 1.428261] apr_tal:Q6 Is Up
  185. [ 1.430795] apr_tal:Modem Is Up
  186. [ 1.435647] modem_8960_init: modem fatal driver init'ed.
  187. [ 1.440378] lpass_fatal_init: lpass SSR driver init'ed.
  188. [ 1.445780] msm_rpm_log_probe: OK
  189. [ 1.450785] futex hash table entries: 256 (order: -1, 3072 bytes)
  190. [ 1.643857] VFS: Disk quotas dquot_6.5.2
  191. [ 1.647245] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  192. [ 1.658080] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  193. [ 1.665038] aufs 3.14-20140915
  194. [ 1.667083] msgmni has been set to 293
  195. [ 1.674713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  196. [ 1.681092] io scheduler noop registered
  197. [ 1.685212] io scheduler deadline registered
  198. [ 1.689668] io scheduler cfq registered (default)
  199. [ 1.694216] wake-n_gpio wake-n_gpio: wake_n probe
  200. [ 1.698916] gpio_check_and_wake: wake-n_gpio77 STATE=SLEEP
  201. [ 1.846726] msm_serial: driver initialized
  202. [ 1.850022] ttyHS0, function 1 is not valid on application processor.
  203. [ 1.856310] msm_serial_hs: probe of msm_serial_hs.0 failed with error -1
  204. [ 1.863085] msm_serial_hs module loaded
  205. [ 1.872028] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
  206. [ 1.882923] diagchar initialized now
  207. [ 1.891988] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
  208. [ 1.898306] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
  209. [ 1.929894] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
  210. [ 1.936761] brd: module loaded
  211. [ 1.939172] wm8944_i2c_init
  212. [ 1.939233] wm8944_i2c_probe
  213. [ 1.939325] wm8944_device_init START
  214. [ 1.939478] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD
  215. [ 1.946925] wm8944 0-001a: WM8944 revision B
  216. [ 1.951625] diag: Invalid Msg type 12 proc 2
  217. [ 1.955318] wm8944 0-001a: No interrupt specified, no interrupts
  218. [ 1.961544] wm8944_device_init OK
  219. [ 1.961880] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  220. [ 1.967770] i2c-core: driver [tabla-i2c-core] using legacy resume method
  221. [ 1.975492] msm_nand_init: Enabling failed write checking
  222. [ 1.979978] msm_nand_probe: phys addr 0x1b400000
  223. [ 1.984648] msm_nand_probe: dmac 0x3
  224. [ 1.988188] msm_nand_probe: allocated dma buffer at d0065000, dma_addr 4f0b0000
  225. [ 1.995421] flash_onfi_probe: No partition info available
  226. [ 2.001434] status: c03020
  227. [ 2.003509] nandid: 1590ac2c maker 2c device ac
  228. [ 2.007996] Setting mtd->writebufsize to 0x800
  229. [ 2.012482] Found a supported NAND device
  230. [ 2.016389] NAND Controller ID : 0x4030
  231. [ 2.020204] NAND Device ID : 0x1590ac2c
  232. [ 2.024141] Buswidth : 8 Bits
  233. [ 2.027071] Density : 512 MByte
  234. [ 2.030276] Pagesize : 2048 Bytes
  235. [ 2.033602] Erasesize: 131072 Bytes
  236. [ 2.037051] Oobsize : 64 Bytes
  237. [ 2.040195] CFG0 Init : 0xa8d408c0
  238. [ 2.043674] CFG1 Init : 0x0004745c
  239. [ 2.047123] ECCBUFCFG : 0x00000203
  240. [ 2.050602] CW size : 528 bytes
  241. [ 2.054021] BCH ECC : disabled
  242. [ 2.057347] 7 cmdlinepart partitions found on MTD device msm_nand
  243. [ 2.063390] Creating 7 MTD partitions on "msm_nand":
  244. [ 2.068335] 0x0000051c0000-0x0000052c0000 : "bootloader"
  245. [ 2.076667] 0x0000052c0000-0x0000066c0000 : "kernel"
  246. [ 2.098245] 0x0000066c0000-0x000009800000 : "rootfs"
  247. [ 2.142682] 0x000009800000-0x00000bf80000 : "user0"
  248. [ 2.179307] 0x00000bf80000-0x000014b00000 : "user1"
  249. [ 2.294155] 0x000014b00000-0x000015000000 : "user2"
  250. [ 2.303982] 0x000015000000-0x000015200000 : "user3"
  251. [ 2.312620] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
  252. [ 2.318693] rmnet_init: BAM devices[8]
  253. [ 2.332244] usbcore: registered new interface driver kaweth
  254. [ 2.336853] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  255. [ 2.344300] usbcore: registered new interface driver pegasus
  256. [ 2.349916] usbcore: registered new interface driver rtl8150
  257. [ 2.355623] usbcore: registered new interface driver asix
  258. [ 2.360933] usbcore: registered new interface driver cdc_ether
  259. [ 2.366763] usbcore: registered new interface driver dm9601
  260. [ 2.372348] usbcore: registered new interface driver smsc75xx
  261. [ 2.378055] usbcore: registered new interface driver smsc95xx
  262. [ 2.383793] usbcore: registered new interface driver net1080
  263. [ 2.389409] usbcore: registered new interface driver cdc_subset
  264. [ 2.395330] usbcore: registered new interface driver zaurus
  265. [ 2.400854] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  266. [ 2.408362] usbcore: registered new interface driver int51x1
  267. [ 2.413947] usbcore: registered new interface driver cdc_ncm
  268. [ 2.419410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  269. [ 2.439890] msm_hsusb_host msm_hsusb_host: unable to find transceiver
  270. [ 2.458599] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral
  271. [ 2.478498] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  272. [ 2.485151] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  273. [ 2.522020] msm_hsic_host msm_hsic_host: irq 264, io mem 0x12540000
  274. [ 2.541950] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  275. [ 2.549580] hub 1-0:1.0: USB hub found
  276. [ 2.552479] hub 1-0:1.0: 1 port detected
  277. [ 2.558034] usbcore: registered new interface driver cdc_acm
  278. [ 2.562795] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  279. [ 2.570975] usbcore: registered new interface driver usbserial
  280. [ 2.576651] usbcore: registered new interface driver ftdi_sio
  281. [ 2.582328] usbserial: USB Serial support registered for FTDI USB Serial Device
  282. [ 2.589714] usbcore: registered new interface driver option
  283. [ 2.595177] usbserial: USB Serial support registered for GSM modem (1-port)
  284. [ 2.602319] usbcore: registered new interface driver qcserial
  285. [ 2.607813] usbserial: USB Serial support registered for Qualcomm USB modem
  286. [ 2.614832] usbcore: registered new interface driver sierra
  287. [ 2.620296] usbserial: USB Serial support registered for Sierra USB modem
  288. [ 2.627132] usbcore: registered new interface driver GobiSerial
  289. [ 2.632992] usbserial: USB Serial support registered for GobiSerial
  290. [ 2.639249] usbcore: registered new interface driver usb_ehset_test
  291. [ 2.645505] msm_otg msm_otg: msm_otg probe
  292. [ 2.649504] msm_otg msm_otg: failed to get phy_clk
  293. [ 2.654661] msm_otg msm_otg: OTG regs = d0070000
  294. [ 2.661559] misc usb_link: registered misc device minor 47
  295. [ 2.667327] msm_hsusb msm_hsusb: ci_hdrc_msm_probe
  296. [ 2.667846] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap: d0072100 op: d0072140
  297. [ 2.670166] mbim_init: initialize 1 instances
  298. [ 2.673950] mbim_init: Initialized 1 ports
  299. [ 2.683045] rndis_qc_init: initialize rndis QC instance
  300. [ 2.688783] android_usb gadget: android_usb ready
  301. [ 2.693972] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8018-core/pm8xxx-pwrkey/input/input0
  302. [ 2.705142] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  303. [ 2.711307] i2c /dev entries driver
  304. [ 2.716099] pm8xxx-adc supply pa_therm not found, using dummy regulator
  305. [ 2.722234] swimcu_hwmon_probe: start
  306. [ 2.725652] swimcu_hwmon_probe: success num 2
  307. [ 2.754433] pm8xxx_tm_probe: OK
  308. [ 2.757301] usbcore: registered new interface driver usbhid
  309. [ 2.762154] usbhid: USB HID core driver
  310. [ 2.767312] usbcore: registered new interface driver snd-usb-audio
  311. [ 2.774607] voice_allocate_shared_memory: ION memory allocation failed
  312. [ 2.780528] msm_pcm_probe: dev name msm-voip-dsp
  313. [ 2.785350] msm_pcm_probe: dev name msm-host-pcm-voice
  314. [ 2.791118] msm_pcm_probe: dev name msm-pcm-dsp
  315. [ 2.794933] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  316. [ 2.801526] mdm9615_audio_init(): Interface Type (wm8944) = 1
  317. [ 2.808118] mdm9615_audio_init - AR8, AR755xRD and CF3 configuration
  318. [ 2.813856] soc-audio soc-audio.0: ASoC: machine mdm9615-wm8944-snd-card should use snd_soc_register_card()
  319. [ 2.840866] soc-audio soc-audio.0: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  320. [ 2.847672] soc-audio soc-audio.0: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  321. [ 2.854875] soc-audio soc-audio.0: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  322. [ 2.861864] soc-audio soc-audio.0: snd-soc-dummy-dai <-> VoIP mapping ok
  323. [ 2.868731] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  324. [ 2.875537] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  325. [ 2.882649] soc-audio soc-audio.0: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  326. [ 2.890431] soc-audio soc-audio.0: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  327. [ 2.898122] soc-audio soc-audio.0: snd-soc-dummy-dai <-> VoLTE mapping ok
  328. [ 2.904898] soc-audio soc-audio.0: snd-soc-dummy-dai <-> DTMF_RX_HOSTLESS mapping ok
  329. [ 2.912498] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok
  330. [ 2.919304] msm_asoc_pcm_new:
  331. [ 2.919334] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok
  332. [ 2.926110] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  333. [ 2.933190] msm_asoc_pcm_new:
  334. [ 2.933221] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-stub mapping ok
  335. [ 2.939966] msm_asoc_pcm_new:
  336. [ 2.939996] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok
  337. [ 2.947138] msm_asoc_pcm_new:
  338. [ 2.947169] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-stub mapping ok
  339. [ 2.953700] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  340. [ 2.960659] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  341. [ 2.967709] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
  342. [ 2.975125] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
  343. [ 2.983427] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
  344. [ 2.990141] hub 1-1:1.0: USB hub found
  345. [ 2.993621] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  346. [ 3.000457] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  347. [ 3.007385] hub 1-1:1.0: 3 ports detected
  348. [ 3.012604] soc-audio soc-audio.0: wm8944-hifi <-> msm-dai-q6.0 mapping ok
  349. [ 3.018678] soc-audio soc-audio.0: wm8944-hifi <-> msm-dai-q6.1 mapping ok
  350. [ 3.042423] TCP: cubic registered
  351. [ 3.044742] NET: Registered protocol family 17
  352. [ 3.049839] Registering SWP/SWPB emulation handler
  353. [ 3.060796] clock_late_init() disabled 34 unused clocks
  354. [ 3.067572] sps:BAM 0x124c2000 is registered.
  355. [ 3.076636] no pmic restart interrupt specified
  356. [ 3.080451] MSM Watchdog Initialized
  357. [ 3.086922] regulator-dummy: disabling
  358. [ 3.103860] msm_otg msm_otg: phy_reset: success
  359. [ 3.108560] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:00:06 UTC (6)
  360. [ 3.119853] ### dt-test ### No testcase data in device tree; not running tests
  361. [ 3.132794] ALSA device list:
  362. [ 3.136914] #0: mdm9615-wm8944-snd-card
  363. [ 3.156264] Freeing unused kernel memory: 1368K (c08db000 - c0a31000)
  364. [ 3.328338] msm_otg msm_otg: OTG state changed, charger_type NOT changed
  365. [ 3.380436] ubi0: attaching mtd2
  366. [ 3.502151] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_RESET_EVENT received
  367. [ 3.507920] ci_hdrc ci_hdrc.0: Connected to host
  368. [ 3.507981] msm_otg msm_otg: OTG state changed, charger_type changed
  369. [ 3.542255] usb 1-1.1: new full-speed USB device number 3 using msm_hsic_host
  370. [ 3.706394] ubi0: scanning is finished
  371. [ 3.717350] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 58, need 80
  372. [ 3.728887] ubi0: attached mtd2 (name "rootfs", size 49 MiB)
  373. [ 3.733618] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  374. [ 3.740393] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  375. [ 3.747199] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  376. [ 3.754127] ubi0: good PEBs: 394, bad PEBs: 0, corrupted PEBs: 0
  377. [ 3.760079] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  378. [ 3.767343] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1294862281
  379. [ 3.776438] ubi0: available PEBs: 0, total reserved PEBs: 394, PEBs reserved for bad PEB handling: 58
  380. [ 3.785655] ubi0: background thread "ubi_bgt0d" started, PID 76
  381. [ 3.823622] block ubiblock0_0: created from ubi0:0(rootfs)
  382. [ 3.876972] random: nonblocking pool is initialized
  383. [ 5.442850] NET: Registered protocol family 1
  384. [ 5.748359] ubi2: attaching mtd4
  385. [ 6.490096] ubi2: scanning is finished
  386. [ 6.492965] ubi2 error: ubi_read_volume_table: the layout volume was not found
  387. [ 6.500869] ubi2 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22
  388. [ 6.598748] ubi2: attaching mtd4
  389. [ 7.341950] ubi2: scanning is finished
  390. [ 7.344880] ubi2 error: ubi_read_volume_table: the layout volume was not found
  391. [ 7.352754] ubi2 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22
  392. [ 7.429909] yaffs: dev is 32505860 name is "mtdblock4" rw
  393. [ 7.434793] yaffs: passed flags "tags-ecc-off"
  394. [ 7.952876] ubi1: attaching mtd3
  395. [ 8.241782] ubi1: scanning is finished
  396. [ 8.272150] ubi1: attached mtd3 (name "user0", size 39 MiB)
  397. [ 8.276728] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  398. [ 8.300534] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  399. [ 8.309354] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  400. [ 8.315397] ubi1: good PEBs: 316, bad PEBs: 0, corrupted PEBs: 0
  401. [ 8.321318] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  402. [ 8.328673] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1251360153
  403. [ 8.337677] ubi1: available PEBs: 0, total reserved PEBs: 316, PEBs reserved for bad PEB handling: 80
  404. [ 8.346894] ubi1: background thread "ubi_bgt1d" started, PID 173
  405. [ 8.393193] block ubiblock1_0: created from ubi1:0(legato)
  406. [ 8.522813] yaffs: dev is 32505861 name is "mtdblock5" rw
  407. [ 8.527239] yaffs: passed flags "tags-ecc-off"
  408. [ 9.070013] SCSI subsystem initialized
  409. [ 9.312589] usbcore: registered new interface driver usb-storage
  410. [ 9.398901] mmc0: mci-version: 18
  411. [ 9.412391] mmc0: bam physical base=0x12182000
  412. [ 9.415809] mmc0: bam virtual base=0xd01f8000
  413. [ 9.420173] sps:BAM 0x12182000 is registered.
  414. [ 9.432107] mmc0: BAM device registered. bam_handle=0xce66b800<6>[ 9.437326] sps:REVISION of BAM 0xd01f8000 is 0x5.
  415. [ 9.447489] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
  416. [ 9.453105] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
  417. [ 9.458721] mmc0: No card detect facilities available
  418. [ 9.468029] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1
  419. [ 9.489302] mmc0: 8 bit data mode disabled
  420. [ 9.492507] mmc0: 4 bit data mode enabled
  421. [ 9.496383] mmc0: polling status mode disabled
  422. [ 9.506546] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  423. [ 9.532397] mmc0: Slot eject status = 0
  424. [ 9.551106] mmc0: Power save feature enable = 1
  425. [ 9.565206] mmc0: SPS-BAM data transfer mode available
  426. [ 10.058904] sps:BAM 0x12502000 is registered.
  427. [ 10.062627] enable_store: android_usb: already disabled
  428. [ 10.241324] Match for Function Name: diag, Int #0
  429. [ 10.272730] Match for Function Name: nmea, Int #2
  430. [ 10.276453] Match for Function Name: modem, Int #3
  431. [ 10.281214] Match for Function Name: at, Int #4
  432. [ 10.343628] Match for Function Name: rmnet0, Int #8
  433. [ 10.347535] frmnet_bind: RmNet(0) dual Speed, IN:ep7in OUT:ep5out
  434. [ 10.368289] ecm_native_function_bind_config: ecm_native_function_bind_config MAC: 00:00:00:00:00:00
  435. [ 10.390874] android_usb gadget: using random self ethernet address
  436. [ 10.403082] usb0: MAC d2:1f:c2:80:53:f6
  437. [ 10.405890] usb0: HOST MAC 4a:84:e6:4f:70:03
  438. [ 10.410163] Match for Function Name: cdc_ethernet, Int #19
  439. [ 10.442209] Match for Function Name: cdc_ethernet, Int #20
  440. [ 10.449839] msm_otg msm_otg: Avail curr from USB = 2
  441. [ 10.453837] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_SUSPEND_EVENT received
  442. [ 10.517350] otg_pc = 3
  443. [ 10.549610] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_RESUME_EVENT received
  444. [ 10.555287] android_disconnect: android_disconnect: Disconnected
  445. [ 10.576346] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  446. [ 10.618281] android_setup: android_setup: Connected
  447. [ 10.627071] android_work: android_work: sent uevent USB_STATE=CONNECTED
  448. [ 10.802227] ip_tables: (C) 2000-2006 Netfilter Core Team
  449. [ 10.931695] nf_conntrack version 0.5.0 (2372 buckets, 9488 max)
  450. [ 11.052067] android_disconnect: android_disconnect: Disconnected
  451. [ 11.062108] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  452. [ 11.118480] android_setup: android_setup: Connected
  453. [ 11.133129] android_work: android_work: sent uevent USB_STATE=CONNECTED
  454. [ 11.272669] NET: Registered protocol family 10
  455. [ 11.375675] android_usb gadget: high-speed config #1: android_usb
  456. [ 11.380955] msm_otg msm_otg: Avail curr from USB = 500
  457. [ 11.385930] android_setup: android_setup: Configured
  458. [ 11.391179] diag: USB connected
  459. [ 11.392308] sps:REVISION of BAM 0xd0358000 is 0x5.
  460. [ 11.452861] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  461. [ 11.625667] ip6_tables: (C) 2000-2006 Netfilter Core Team
  462. [ 12.767129] nmea: smd opened
  463. [ 16.894216] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:187
  464. [ 16.899862] qup_i2c qup_i2c.0: I2C slave addr:0x3a not connected
  465. [ 20.018403] adb_open
  466. [ 20.488814] mbim_open: Open mbim driver
  467. [ 20.491652] mbim_open: Lock mbim_dev->open_excl for open
  468. [ 20.503952] mbim_open: USB cable not connected
  469. [ 20.508255] mbim_open: Exit, mbim file opened
  470. [ 20.517564] mbim_read: Requests list is empty. Wait.
  471. [ 20.984892] gpio_sync_ri: RI owner is Modem
  472. [ 20.988066] ->gpio16 = 0
  473. [ 20.988097] ->gpio17 = 0
  474. [ 20.988097] ->gpio18 = 0
  475. [ 20.988127] ->gpio19 = 0
  476. [ 20.988127] gpio_map_name_to_num: gpioRI is not supported
  477. [ 20.994445] export_store: status -1
  478. [ 925.899862] Loading modules backported from Linux version R8.5
  479. [ 925.915763] Backport generated by backports.git R8.5
  480. [ 926.064703] gpio_sync_ri: RI owner is Modem
  481. [ 926.067877] ->gpio16 = 0
  482. [ 926.067907] ->gpio17 = 0
  483. [ 926.067907] ->gpio18 = 0
  484. [ 926.067938] ->gpio19 = 0
  485. [ 926.193254] cfg80211: Calling CRDA to update world regulatory domain
  486. [ 926.483259] cfg80211: World regulatory domain updated:
  487. [ 926.487379] cfg80211: DFS Master region: unset
  488. [ 926.491713] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  489. [ 926.502273] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  490. [ 926.509445] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  491. [ 926.517839] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  492. [ 926.525652] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  493. [ 926.535083] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  494. [ 926.544544] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  495. [ 926.552632] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  496. [ 926.560414] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  497. [ 927.227163] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
  498. [ 927.233358] qup_i2c qup_i2c.0: I2C slave addr:0x70 not connected
  499. [ 927.240378] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
  500. [ 927.246512] qup_i2c qup_i2c.0: I2C slave addr:0x70 not connected
  501. [ 927.253715] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187
  502. [ 927.259331] qup_i2c qup_i2c.0: I2C slave addr:0x70 not connected
  503. [ 927.267755] gpio_sync_ri: RI owner is Modem
  504. [ 927.270929] ->gpio16 = 0
  505. [ 927.270929] ->gpio17 = 0
  506. [ 927.270959] ->gpio18 = 0
  507. [ 927.270959] ->gpio19 = 0
  508. [ 927.305112] mmc0: mci-version: 18
  509. [ 927.322356] mmc0: bam physical base=0x12182000
  510. [ 927.325774] mmc0: bam virtual base=0xd0654000
  511. [ 927.330138] sps:BAM 0x12182000 is registered.
  512. [ 927.352082] mmc0: BAM device registered. bam_handle=0xce66bc00<6>[ 927.357271] sps:REVISION of BAM 0xd0654000 is 0x5.
  513. [ 927.364687] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130
  514. [ 927.370181] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800
  515. [ 927.376712] mmc0: No card detect facilities available
  516. [ 927.385685] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1
  517. [ 927.402166] mmc0: 8 bit data mode disabled
  518. [ 927.405279] mmc0: 4 bit data mode enabled
  519. [ 927.421058] mmc0: polling status mode disabled
  520. [ 927.430031] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  521. [ 927.462597] mmc0: Slot eject status = 0
  522. [ 927.476270] mmc0: Power save feature enable = 1
  523. [ 927.495772] mmc0: SPS-BAM data transfer mode available
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!