Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [sudo] Passwort für frank:
- Willkommen zu minicom 2.7.1
- Optionen: I18n
- Übersetzt am Dec 23 2019, 02:06:26.
- Port /dev/ttyUSB0, 14:47:14
- Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
- DDR Version V1.11 20211103
- ln
- ddrconfig:7
- LPDDR4X, 324MHz
- BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
- tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps,
- tdqss: cs1 dqs0: -24ps, dqs1: -72ps, dqs2: -72ps, dqs3: -168ps,
- change to: 324MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x63
- change to: 528MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 780MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 1560MHz(final freq)
- PHY drv:clk:36,ca:36,DQ:29,odt:60
- vrefinner:16%, vrefout:22%
- dram drv:40,odt:80
- vref_ca:00000071
- clk skew:0x21
- cs 0:
- the read training result:
- DQS0:0x38, DQS1:0x36, DQS2:0x3a, DQS3:0x33,
- min :0x11 0x13 0x16 0x10 0x2 0x6 0xa 0x3 , 0xc 0xc 0x3 0x1 0xe 0xe 0,
- 0x17 0x17 0x10 0xf 0xa 0x2 0x5 0x5 ,0x11 0xe 0xa 0x2 0x14 0x12 0,
- mid :0x2e 0x2e 0x32 0x2d 0x1e 0x23 0x27 0x1f ,0x27 0x26 0x1f 0x1d 0x29 0x28 0x,
- 0x30 0x30 0x2a 0x27 0x20 0x1c 0x1d 0x1f ,0x2b 0x26 0x24 0x1d 0x2c 0x2c 0x,
- max :0x4b 0x49 0x4e 0x4a 0x3b 0x40 0x44 0x3c ,0x42 0x41 0x3b 0x39 0x44 0x42 0x,
- 0x49 0x4a 0x44 0x40 0x37 0x37 0x36 0x3a ,0x46 0x3f 0x3f 0x39 0x45 0x46 0x,
- range:0x3a 0x36 0x38 0x3a 0x39 0x3a 0x3a 0x39 ,0x36 0x35 0x38 0x38 0x36 0x34 0x,
- 0x32 0x33 0x34 0x31 0x2d 0x35 0x31 0x35 ,0x35 0x31 0x35 0x37 0x31 0x34 0x,
- the write training result:
- DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
- min :0x6b 0x6d 0x70 0x6a 0x5a 0x5c 0x62 0x62 0x60 ,0x53 0x53 0x4e 0x4c 0x56 0x,
- 0x6a 0x6b 0x62 0x62 0x5a 0x57 0x58 0x5e 0x5e ,0x50 0x4f 0x4d 0x47 0x54 0x,
- mid :0x86 0x89 0x8b 0x84 0x73 0x77 0x7c 0x7a 0x77 ,0x6e 0x6f 0x67 0x66 0x6e 0x,
- 0x85 0x85 0x7b 0x7b 0x73 0x71 0x70 0x76 0x76 ,0x6b 0x6a 0x67 0x60 0x6d 0x,
- max :0xa1 0xa5 0xa7 0x9f 0x8c 0x92 0x96 0x92 0x8f ,0x89 0x8b 0x81 0x81 0x86 0x,
- 0xa1 0x9f 0x95 0x94 0x8d 0x8b 0x89 0x8e 0x8e ,0x86 0x86 0x82 0x7a 0x86 0x,
- range:0x36 0x38 0x37 0x35 0x32 0x36 0x34 0x30 0x2f ,0x36 0x38 0x33 0x35 0x30 0x,
- 0x37 0x34 0x33 0x32 0x33 0x34 0x31 0x30 0x30 ,0x36 0x37 0x35 0x33 0x32 0x,
- cs 1:
- the read training result:
- DQS0:0x35, DQS1:0x34, DQS2:0x37, DQS3:0x31,
- min :0x11 0x12 0x14 0x11 0x1 0x5 0xa 0x2 , 0xc 0xc 0x3 0x2 0xd 0xc 0,
- 0x13 0x13 0xd 0xd 0x7 0x1 0x3 0x3 , 0xd 0xa 0x7 0x1 0x13 0x11 0,
- mid :0x2d 0x2d 0x30 0x2c 0x1d 0x21 0x25 0x1d ,0x25 0x26 0x1e 0x1d 0x28 0x25 0x,
- 0x2c 0x2c 0x26 0x25 0x1e 0x1b 0x1b 0x1e ,0x28 0x23 0x23 0x1d 0x2c 0x2b 0x,
- max :0x49 0x49 0x4c 0x47 0x39 0x3d 0x41 0x39 ,0x3f 0x40 0x39 0x38 0x43 0x3f 0x,
- 0x46 0x45 0x40 0x3e 0x36 0x36 0x34 0x39 ,0x44 0x3d 0x3f 0x39 0x45 0x46 0x,
- range:0x38 0x37 0x38 0x36 0x38 0x38 0x37 0x37 ,0x33 0x34 0x36 0x36 0x36 0x33 0x,
- 0x33 0x32 0x33 0x31 0x2f 0x35 0x31 0x36 ,0x37 0x33 0x38 0x38 0x32 0x35 0x,
- the write training result:
- DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
- min :0x73 0x77 0x7a 0x74 0x63 0x69 0x6c 0x6c 0x6a ,0x61 0x63 0x59 0x58 0x63 0x,
- 0x64 0x63 0x5f 0x5c 0x54 0x53 0x53 0x58 0x5b ,0x52 0x4f 0x4d 0x48 0x53 0x,
- mid :0x8f 0x92 0x94 0x8e 0x7c 0x82 0x85 0x83 0x82 ,0x7b 0x7c 0x74 0x71 0x7d 0x,
- 0x80 0x80 0x79 0x77 0x6e 0x6d 0x6c 0x72 0x74 ,0x6d 0x6a 0x67 0x61 0x6d 0x,
- max :0xab 0xad 0xaf 0xa9 0x96 0x9b 0x9f 0x9a 0x9a ,0x96 0x96 0x8f 0x8b 0x97 0x,
- 0x9c 0x9d 0x94 0x93 0x89 0x88 0x86 0x8d 0x8d ,0x89 0x85 0x82 0x7a 0x87 0x,
- range:0x38 0x36 0x35 0x35 0x33 0x32 0x33 0x2e 0x30 ,0x35 0x33 0x36 0x33 0x34 0x,
- 0x38 0x3a 0x35 0x37 0x35 0x35 0x33 0x35 0x32 ,0x37 0x36 0x35 0x32 0x34 0x,
- CA Training result:
- cs:0 min :0x4e 0x4a 0x43 0x3a 0x42 0x38 0x4b ,0x4d 0x43 0x42 0x38 0x40 0x32 0x,
- cs:0 mid :0x8a 0x8b 0x7b 0x7c 0x7b 0x7a 0x78 ,0x87 0x85 0x7b 0x7a 0x79 0x76 0x,
- cs:0 max :0xc6 0xcc 0xb4 0xbe 0xb5 0xbd 0xa6 ,0xc1 0xc7 0xb5 0xbc 0xb3 0xba 0x,
- cs:0 range:0x78 0x82 0x71 0x84 0x73 0x85 0x5b ,0x74 0x84 0x73 0x84 0x73 0x88 0x,
- cs:1 min :0x4e 0x52 0x41 0x40 0x44 0x3c 0x4a ,0x4c 0x48 0x40 0x3e 0x40 0x3c 0x,
- cs:1 mid :0x8d 0x90 0x7c 0x7e 0x7f 0x7c 0x78 ,0x88 0x86 0x7d 0x7c 0x7c 0x78 0x,
- cs:1 max :0xcc 0xce 0xb8 0xbc 0xbb 0xbd 0xa7 ,0xc4 0xc4 0xbb 0xbb 0xb8 0xb4 0x,
- cs:1 range:0x7e 0x7c 0x77 0x7c 0x77 0x81 0x5d ,0x78 0x7c 0x7b 0x7d 0x78 0x78 0x,
- out
- rockchip_sdram_size fdc20208 10000af1
- rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
- SDRAM base=0, size=100000000
- U-Boot SPL 2022.04-2 (Apr 07 2022 - 18:03:21 +0000)
- saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss.!
- Trying to boot from MMC1
- mmc_load_image_raw_sector: mmc block read error
- Trying to boot from SPI
- Trying to boot from MMC1
- INFO: Preloader serial: 2
- NOTICE: BL31: v2.3():v2.3-152-g4e725b15f:cl
- NOTICE: BL31: Built : 10:51:13, Jul 15 2021
- INFO: GICv3 without legacy support detected.
- INFO: ARM GICv3 driver initialized in EL3
- INFO: pmu v1 is valid
- INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz
- INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
- INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
- INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0xa00000
- INFO: SPSR = 0x3c9
- U-Boot 2022.04-2 (Apr 07 2022 - 18:03:21 +0000) Manjaro Linux ARM
- Model: Pine64 RK3566 Quartz64-B Board
- DRAM: rockchip_sdram_size fdc20208 10000af1
- rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
- SDRAM base=0, size=100000000
- 3.7 GiB
- PMIC: RK8090 (on=0x10, off=0x00)
- Core: 282 devices, 21 uclasses, devicetree: separate
- MMC: rockchip_sdhci_probe clk set rate fail!
- mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
- Loading Environment from nowhere... OK
- In: serial@fe660000
- Out: serial@fe660000
- Err: serial@fe660000
- Model: Pine64 RK3566 Quartz64-B Board
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 1: Manjaro ARM
- Retrieving file: /initramfs-linux.img
- Retrieving file: /Image
- append: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=032af10s
- Retrieving file: /dtbs/rockchip/rk3566-quartz64-b.dtb
- Moving Image from 0x2080000 to 0x2200000, end=3d50000
- ## Flattened Device Tree blob at 0a100000
- Booting using the fdt blob at 0xa100000
- Loading Ramdisk to ed6dd000, end edeec635 ... OK
- Loading Device Tree to 00000000ed6bf000, end 00000000ed6dcd05 ... OK
- Starting kernel ...
- :: running early hook [udev]
- Starting version 251.2-1-arch
- :: running early hook [plymouth]
- Manjaro Linux 5.17.0-3-MANJARO-ARM-Q64 (ttyS2)
- frank-pc login: [ 568.973836] sd-umoun[811]: Failed to unmount /oldroot: Devicy
- [ 568.976518] sd-umoun[812]: Failed to unmount /oldroot/dev: Device or resourcy
- [ 568.980089] shutdown[1]: Failed to finalize file systems, ignoring.
- [ 574.736021] mmc1: error -110 during shutdown
- [ 575.009765] reboot: Power down
- [ 575.010874] Kernel�append: initrd=/initramfs-linux.img console=ttyS2,1500000s
- Retrieving file: /dtbs/rockchip/rk3566-quartz64-b.dtb
- Moving Image from 0x2080000 to 0x2200000, end=3d50000
- ## Flattened Device Tree blob at 0a100000
- Booting using the fdt blob at 0xa100000
- Loading Ramdisk to ed6dd000, end edeec635 ... OK
- Loading Device Tree to 00000000ed6bf000, end 00000000ed6dcd05 ... OK
- Starting kernel ...
- :: running early hook [udev]
- Starting version 251.2-1-arch
- :: running early hook [plymouth]
- Manjaro Linux 5.17.0-3-MANJARO-ARM-Q64 (ttyS2)
- frank-pc login:
- frank-pc login:
- frank-pc login: [ 1235.719024] watchdog: watchdog0: watchdog did not stop!
- [ 1236.096161] watchdog: watchdog0: watchdog did not stop!
- [ 1236.267538] sd-umoun[4010]: Failed to unmount /oldroot: Device or resource by
- [ 1236.270152] sd-umoun[4011]: Failed to unmount /oldroot/dev: Device or resoury
- [ 1236.271674] watchdog: watchdog0: watchdog did not stop!
- [ 1236.274401] shutdown[1]: Failed to finalize file systems, ignoring.
- [ 1236.894694] reboot: Restarting system
- DDR Version V1.11 20211103
- ln
- ddrconfig:7
- LPDDR4X, 324MHz
- BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
- tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps,
- tdqss: cs1 dqs0: -24ps, dqs1: -72ps, dqs2: -48ps, dqs3: -168ps,
- change to: 324MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x63
- change to: 528MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 780MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 1560MHz(final freq)
- PHY drv:clk:36,ca:36,DQ:29,odt:60
- vrefinner:16%, vrefout:22%
- dram drv:40,odt:80
- vref_ca:00000071
- clk skew:0x21
- cs 0:
- the read training result:
- DQS0:0x38, DQS1:0x35, DQS2:0x3a, DQS3:0x32,
- min :0x12 0x12 0x17 0x11 0x2 0x5 0x9 0x2 , 0xc 0xa 0x4 0x1 0xf 0xe 0,
- 0x16 0x16 0x10 0xd 0x9 0x1 0x4 0x5 ,0x10 0xd 0x8 0x1 0x13 0x11 0,
- mid :0x2e 0x2f 0x33 0x2d 0x1e 0x22 0x25 0x1e ,0x26 0x26 0x1f 0x1c 0x29 0x27 0x,
- 0x2e 0x2e 0x29 0x26 0x20 0x1b 0x1c 0x1f ,0x2b 0x26 0x23 0x1c 0x2c 0x2b 0x,
- max :0x4a 0x4c 0x4f 0x49 0x3b 0x3f 0x42 0x3b ,0x40 0x42 0x3b 0x37 0x43 0x41 0x,
- 0x47 0x47 0x43 0x40 0x37 0x36 0x35 0x39 ,0x46 0x3f 0x3f 0x38 0x45 0x45 0x,
- range:0x38 0x3a 0x38 0x38 0x39 0x3a 0x39 0x39 ,0x34 0x38 0x37 0x36 0x34 0x33 0x,
- 0x31 0x31 0x33 0x33 0x2e 0x35 0x31 0x34 ,0x36 0x32 0x37 0x37 0x32 0x34 0x,
- the write training result:
- DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
- min :0x6c 0x6f 0x71 0x6c 0x5a 0x5e 0x64 0x63 0x62 ,0x52 0x56 0x50 0x4d 0x57 0x,
- 0x6a 0x6c 0x62 0x62 0x59 0x57 0x59 0x60 0x5f ,0x52 0x51 0x4e 0x4a 0x56 0x,
- mid :0x88 0x8a 0x8c 0x85 0x73 0x78 0x7d 0x7c 0x77 ,0x6d 0x70 0x69 0x67 0x70 0x,
- 0x85 0x85 0x7c 0x7b 0x73 0x71 0x72 0x77 0x77 ,0x6d 0x6b 0x69 0x62 0x6f 0x,
- max :0xa4 0xa6 0xa7 0x9f 0x8d 0x92 0x97 0x95 0x8d ,0x89 0x8b 0x82 0x82 0x89 0x,
- 0xa1 0x9f 0x96 0x95 0x8e 0x8c 0x8c 0x8f 0x8f ,0x89 0x86 0x84 0x7b 0x89 0x,
- range:0x38 0x37 0x36 0x33 0x33 0x34 0x33 0x32 0x2b ,0x37 0x35 0x32 0x35 0x32 0x,
- 0x37 0x33 0x34 0x33 0x35 0x35 0x33 0x2f 0x30 ,0x37 0x35 0x36 0x31 0x33 0x,
- cs 1:
- the read training result:
- DQS0:0x35, DQS1:0x34, DQS2:0x38, DQS3:0x32,
- min :0x12 0x11 0x14 0x12 0x1 0x5 0xa 0x2 , 0xb 0xc 0x3 0x2 0xd 0xd 0,
- 0x13 0x13 0xe 0xd 0x8 0x1 0x3 0x3 , 0xe 0xc 0xa 0x2 0x13 0x13 0,
- mid :0x2d 0x2d 0x30 0x2c 0x1d 0x21 0x25 0x1d ,0x25 0x26 0x1e 0x1d 0x28 0x26 0x,
- 0x2d 0x2c 0x28 0x25 0x1f 0x1b 0x1c 0x1e ,0x2a 0x25 0x24 0x1e 0x2d 0x2d 0x,
- max :0x49 0x49 0x4c 0x47 0x39 0x3e 0x41 0x39 ,0x3f 0x40 0x39 0x38 0x43 0x3f 0x,
- 0x47 0x46 0x42 0x3e 0x36 0x36 0x36 0x3a ,0x46 0x3f 0x3f 0x3a 0x47 0x47 0x,
- range:0x37 0x38 0x38 0x35 0x38 0x39 0x37 0x37 ,0x34 0x34 0x36 0x36 0x36 0x32 0x,
- 0x34 0x33 0x34 0x31 0x2e 0x35 0x33 0x37 ,0x38 0x33 0x35 0x38 0x34 0x34 0x,
- the write training result:
- DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
- min :0x74 0x78 0x7a 0x76 0x65 0x69 0x6d 0x6d 0x6b ,0x62 0x63 0x5b 0x59 0x63 0x,
- 0x6a 0x69 0x63 0x62 0x59 0x58 0x57 0x5f 0x60 ,0x52 0x51 0x4f 0x4a 0x54 0x,
- mid :0x90 0x93 0x95 0x90 0x7e 0x83 0x86 0x84 0x83 ,0x7c 0x7c 0x75 0x72 0x7e 0x,
- 0x87 0x85 0x7d 0x7d 0x74 0x72 0x71 0x78 0x79 ,0x6d 0x6b 0x69 0x63 0x6e 0x,
- max :0xac 0xae 0xb1 0xab 0x98 0x9d 0x9f 0x9c 0x9b ,0x97 0x96 0x8f 0x8c 0x9a 0x,
- 0xa4 0xa1 0x98 0x98 0x8f 0x8c 0x8c 0x92 0x93 ,0x89 0x86 0x84 0x7c 0x89 0x,
- range:0x38 0x36 0x37 0x35 0x33 0x34 0x32 0x2f 0x30 ,0x35 0x33 0x34 0x33 0x37 0x,
- 0x3a 0x38 0x35 0x36 0x36 0x34 0x35 0x33 0x33 ,0x37 0x35 0x35 0x32 0x35 0x,
- CA Training result:
- cs:0 min :0x4f 0x4a 0x43 0x3c 0x42 0x39 0x4b ,0x4e 0x43 0x42 0x39 0x40 0x33 0x,
- cs:0 mid :0x8a 0x8b 0x7c 0x7d 0x7c 0x7c 0x79 ,0x87 0x85 0x7b 0x7b 0x79 0x77 0x,
- cs:0 max :0xc5 0xcc 0xb5 0xbf 0xb6 0xbf 0xa7 ,0xc1 0xc8 0xb5 0xbd 0xb3 0xbb 0x,
- cs:0 range:0x76 0x82 0x72 0x83 0x74 0x86 0x5c ,0x73 0x85 0x73 0x84 0x73 0x88 0x,
- cs:1 min :0x4e 0x52 0x41 0x40 0x44 0x3d 0x49 ,0x4c 0x48 0x40 0x3e 0x40 0x3c 0x,
- cs:1 mid :0x8d 0x90 0x7c 0x7d 0x7f 0x7c 0x78 ,0x88 0x86 0x7d 0x7c 0x7c 0x78 0x,
- cs:1 max :0xcc 0xce 0xb8 0xbb 0xbb 0xbb 0xa8 ,0xc4 0xc4 0xbb 0xba 0xb8 0xb4 0x,
- cs:1 range:0x7e 0x7c 0x77 0x7b 0x77 0x7e 0x5f ,0x78 0x7c 0x7b 0x7c 0x78 0x78 0x,
- out
- rockchip_sdram_size fdc20208 10000af1
- rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
- SDRAM base=0, size=100000000
- U-Boot SPL 2022.04-2 (Apr 07 2022 - 18:03:21 +0000)
- saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss.!
- Trying to boot from MMC1
- INFO: Preloader serial: 2
- NOTICE: BL31: v2.3():v2.3-152-g4e725b15f:cl
- NOTICE: BL31: Built : 10:51:13, Jul 15 2021
- INFO: GICv3 without legacy support detected.
- INFO: ARM GICv3 driver initialized in EL3
- INFO: pmu v1 is valid
- INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz
- INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
- INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
- INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0xa00000
- INFO: SPSR = 0x3c9
- U-Boot 2022.04-2 (Apr 07 2022 - 18:03:21 +0000) Manjaro Linux ARM
- Model: Pine64 RK3566 Quartz64-B Board
- DRAM: rockchip_sdram_size fdc20208 10000af1
- rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
- SDRAM base=0, size=100000000
- 3.7 GiB
- PMIC: RK8090 (on=0x02, off=0x00)
- Core: 282 devices, 21 uclasses, devicetree: separate
- MMC: rockchip_sdhci_probe clk set rate fail!
- mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
- Loading Environment from nowhere... OK
- In: serial@fe660000
- Out: serial@fe660000
- Err: serial@fe660000
- Model: Pine64 RK3566 Quartz64-B Board
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 1: Manjaro ARM
- Retrieving file: /initramfs-linux.img
- Retrieving file: /Image
- append: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=032af10s
- Retrieving file: /dtbs/rockchip/rk3566-quartz64-b.dtb
- Moving Image from 0x2080000 to 0x2200000, end=3d80000
- ## Flattened Device Tree blob at 0a100000
- Booting using the fdt blob at 0xa100000
- Loading Ramdisk to ed6d4000, end edeec669 ... OK
- Loading Device Tree to 00000000ed6b6000, end 00000000ed6d34f2 ... OK
- Starting kernel ...
- :: running early hook [udev]
- Starting version 251.2-1-arch
- :: running early hook [plymouth]
- Manjaro Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 (ttyS2)
- frank-pc login:(@`DADDR Version V1.11 20211103
- ln
- ddrconfig:7
- LPDDR4X, 324MHz
- BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
- tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps,
- tdqss: cs1 dqs0: -24ps, dqs1: -72ps, dqs2: -48ps, dqs3: -168ps,
- change to: 324MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x63
- change to: 528MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 780MHz
- PHY drv:clk:36,ca:36,DQ:29,odt:0
- vrefinner:41%, vrefout:41%
- dram drv:40,odt:0
- clk skew:0x58
- change to: 1560MHz(final freq)
- PHY drv:clk:36,ca:36,DQ:29,odt:60
- vrefinner:16%, vrefout:22%
- dram drv:40,odt:80
- vref_ca:00000071
- clk skew:0x21
- cs 0:
- the read training result:
- DQS0:0x39, DQS1:0x36, DQS2:0x3a, DQS3:0x33,
- min :0x12 0x14 0x17 0x12 0x2 0x7 0xa 0x3 , 0xc 0xc 0x3 0x1 0xe 0xd 0,
- 0x16 0x16 0x10 0xd 0xa 0x1 0x3 0x4 ,0x10 0xd 0x8 0x1 0x13 0x12 0,
- mid :0x2f 0x30 0x33 0x2e 0x1e 0x24 0x27 0x20 ,0x26 0x27 0x1f 0x1c 0x29 0x27 0x,
- 0x2e 0x2f 0x29 0x26 0x20 0x1b 0x1c 0x1e ,0x2b 0x26 0x23 0x1d 0x2c 0x2c 0x,
- max :0x4c 0x4c 0x50 0x4b 0x3b 0x41 0x44 0x3d ,0x41 0x42 0x3b 0x38 0x44 0x42 0x,
- 0x47 0x48 0x43 0x40 0x36 0x36 0x35 0x39 ,0x46 0x40 0x3f 0x39 0x45 0x47 0x,
- range:0x3a 0x38 0x39 0x39 0x39 0x3a 0x3a 0x3a ,0x35 0x36 0x38 0x37 0x36 0x35 0x,
- 0x31 0x32 0x33 0x33 0x2c 0x35 0x32 0x35 ,0x36 0x33 0x37 0x38 0x32 0x35 0x,
- the write training result:
- DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
- min :0x6b 0x6e 0x71 0x6a 0x5a 0x5e 0x63 0x63 0x62 ,0x52 0x55 0x4f 0x4d 0x57 0x,
- 0x6a 0x6c 0x62 0x62 0x59 0x57 0x59 0x60 0x5e ,0x52 0x51 0x4d 0x49 0x56 0x,
- mid :0x87 0x89 0x8c 0x84 0x73 0x78 0x7c 0x7b 0x78 ,0x6d 0x70 0x68 0x67 0x6f 0x,
- 0x85 0x85 0x7c 0x7b 0x74 0x71 0x72 0x77 0x76 ,0x6d 0x6b 0x68 0x62 0x6f 0x,
- max :0xa3 0xa5 0xa7 0x9f 0x8d 0x93 0x96 0x94 0x8e ,0x89 0x8b 0x81 0x81 0x87 0x,
- 0xa1 0x9f 0x96 0x95 0x8f 0x8c 0x8b 0x8f 0x8e ,0x89 0x86 0x84 0x7b 0x89 0x,
- range:0x38 0x37 0x36 0x35 0x33 0x35 0x33 0x31 0x2c ,0x37 0x36 0x32 0x34 0x30 0x,
- 0x37 0x33 0x34 0x33 0x36 0x35 0x32 0x2f 0x30 ,0x37 0x35 0x37 0x32 0x33 0x,
- cs 1:
- the read training result:
- DQS0:0x35, DQS1:0x34, DQS2:0x38, DQS3:0x32,
- min :0x12 0x11 0x14 0x12 0x1 0x5 0xa 0x2 , 0xc 0xc 0x2 0x2 0xd 0xc 0,
- 0x13 0x13 0xd 0xd 0x8 0x1 0x3 0x3 , 0xe 0xc 0xa 0x1 0x13 0x13 0,
- mid :0x2d 0x2d 0x30 0x2c 0x1d 0x21 0x25 0x1d ,0x25 0x25 0x1e 0x1d 0x28 0x25 0x,
- 0x2d 0x2c 0x27 0x25 0x1f 0x1b 0x1c 0x1e ,0x29 0x25 0x24 0x1d 0x2d 0x2d 0x,
- max :0x49 0x49 0x4c 0x47 0x39 0x3e 0x41 0x39 ,0x3f 0x3f 0x3a 0x38 0x43 0x3f 0x,
- 0x47 0x46 0x41 0x3d 0x36 0x36 0x35 0x39 ,0x45 0x3f 0x3f 0x39 0x47 0x47 0x,
- range:0x37 0x38 0x38 0x35 0x38 0x39 0x37 0x37 ,0x33 0x33 0x38 0x36 0x36 0x33 0x,
- 0x34 0x33 0x34 0x30 0x2e 0x35 0x32 0x36 ,0x37 0x33 0x35 0x38 0x34 0x34 0x,
- the write training result:
- DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
- min :0x74 0x78 0x7a 0x74 0x65 0x69 0x6d 0x6d 0x6b ,0x62 0x63 0x5a 0x59 0x63 0x,
- 0x6a 0x69 0x63 0x62 0x5a 0x57 0x58 0x5f 0x60 ,0x53 0x51 0x4f 0x4a 0x54 0x,
- mid :0x90 0x93 0x95 0x8f 0x7e 0x83 0x86 0x84 0x82 ,0x7c 0x7c 0x74 0x72 0x7e 0x,
- 0x87 0x85 0x7d 0x7c 0x74 0x71 0x72 0x78 0x79 ,0x6e 0x6b 0x69 0x63 0x6e 0x,
- max :0xac 0xae 0xb1 0xaa 0x98 0x9d 0x9f 0x9b 0x9a ,0x96 0x96 0x8f 0x8c 0x99 0x,
- 0xa4 0xa2 0x98 0x97 0x8f 0x8c 0x8c 0x92 0x93 ,0x89 0x85 0x84 0x7c 0x89 0x,
- range:0x38 0x36 0x37 0x36 0x33 0x34 0x32 0x2e 0x2f ,0x34 0x33 0x35 0x33 0x36 0x,
- 0x3a 0x39 0x35 0x35 0x35 0x35 0x34 0x33 0x33 ,0x36 0x34 0x35 0x32 0x35 0x,
- CA Training result:
- cs:0 min :0x4e 0x4a 0x43 0x3c 0x41 0x39 0x4b ,0x4e 0x44 0x42 0x39 0x40 0x34 0x,
- cs:0 mid :0x89 0x8b 0x7c 0x7d 0x7b 0x7c 0x79 ,0x87 0x85 0x7b 0x7b 0x79 0x77 0x,
- cs:0 max :0xc5 0xcc 0xb5 0xbf 0xb6 0xbf 0xa7 ,0xc1 0xc7 0xb5 0xbd 0xb3 0xbb 0x,
- cs:0 range:0x77 0x82 0x72 0x83 0x75 0x86 0x5c ,0x73 0x83 0x73 0x84 0x73 0x87 0x,
- cs:1 min :0x4e 0x52 0x41 0x40 0x44 0x3c 0x49 ,0x4c 0x48 0x40 0x3e 0x40 0x3c 0x,
- cs:1 mid :0x8d 0x90 0x7c 0x7d 0x7f 0x7b 0x78 ,0x88 0x86 0x7d 0x7c 0x7c 0x78 0x,
- cs:1 max :0xcc 0xce 0xb8 0xbb 0xbb 0xbb 0xa7 ,0xc4 0xc4 0xbb 0xba 0xb8 0xb4 0x,
- cs:1 range:0x7e 0x7c 0x77 0x7b 0x77 0x7f 0x5e ,0x78 0x7c 0x7b 0x7c 0x78 0x78 0x,
- out
- rockchip_sdram_size fdc20208 10000af1
- rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
- SDRAM base=0, size=100000000
- U-Boot SPL 2022.04-2 (Apr 07 2022 - 18:03:21 +0000)
- saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss.!
- Trying to boot from MMC1
- mmc_load_image_raw_sector: mmc block read error
- Trying to boot from SPI
- Trying to boot from MMC1
- INFO: Preloader serial: 2
- NOTICE: BL31: v2.3():v2.3-152-g4e725b15f:cl
- NOTICE: BL31: Built : 10:51:13, Jul 15 2021
- INFO: GICv3 without legacy support detected.
- INFO: ARM GICv3 driver initialized in EL3
- INFO: pmu v1 is valid
- INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz
- INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
- INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
- INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0xa00000
- INFO: SPSR = 0x3c9
- U-Boot 2022.04-2 (Apr 07 2022 - 18:03:21 +0000) Manjaro Linux ARM
- Model: Pine64 RK3566 Quartz64-B Board
- DRAM: rockchip_sdram_size fdc20208 10000af1
- rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
- SDRAM base=0, size=100000000
- 3.7 GiB
- PMIC: RK8090 (on=0x40, off=0x00)
- Core: 282 devices, 21 uclasses, devicetree: separate
- MMC: rockchip_sdhci_probe clk set rate fail!
- mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
- Loading Environment from nowhere... OK
- In: serial@fe660000
- Out: serial@fe660000
- Err: serial@fe660000
- Model: Pine64 RK3566 Quartz64-B Board
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 1: Manjaro ARM
- Retrieving file: /initramfs-linux.img
- Retrieving file: /Image
- append: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=032af10s
- Retrieving file: /dtbs/rockchip/rk3566-quartz64-b.dtb
- Moving Image from 0x2080000 to 0x2200000, end=3d80000
- ## Flattened Device Tree blob at 0a100000
- Booting using the fdt blob at 0xa100000
- Loading Ramdisk to ed6d4000, end edeec669 ... OK
- Loading Device Tree to 00000000ed6b6000, end 00000000ed6d34f2 ... OK
- Starting kernel ...
- :: running early hook [udev]
- Starting version 251.2-1-arch
- :: running early hook [plymouth]
- Manjaro Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 (ttyS2)
- frank-pc login: frank
- Passwort:
- Welcome to Manjaro-ARM
- ~~Website: https://manjaro.org
- ~~Forum: https://forum.manjaro.org/c/arm
- ~~Matrix: #manjaro-arm-public:matrix.org
- Letzte Anmeldung: Fri Jun 10 10:55:19 von 192.168.3.213
- [frank@frank-pc ~]$ su -
- Passwort:
- [root@frank-pc ~]# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
- [ 0.000000] Linux version 5.19.0-rc1-0.1-MANJARO-ARM-Q64 (builduser@fh-mjr-b2
- [ 0.000000] Machine model: Pine64 RK3566 Quartz64-B Board
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
- [ 0.000000] cma: Reserved 256 MiB at 0x00000000d9a00000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] percpu: Embedded 20 pages/cpu s42152 r8192 d31576 u81920
- [ 0.000000] pcpu-alloc: s42152 r8192 d31576 u81920 alloc=20*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Virtualization Host Extensions
- [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.000000] alternatives: patching kernel code
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176
- [ 0.000000] Kernel command line: initrd=/initramfs-linux.img console=ttyS2,1s
- [ 0.000000] audit: disabled (until reboot)
- [ 0.000000] Unknown kernel command line parameters "splash", will be passed .
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 3555248K/3930112K available (15808K kernel code, 2056K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 320 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: MBI range [296:319]
- [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
- [ 0.000000] Root IRQ handler: gic_handle_irq
- [ 0.000000] GICv3: GICv3 features: 16 PPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.001140] Console: colour dummy device 80x25
- [ 0.001205] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.001223] pid_max: default: 32768 minimum: 301
- [ 0.001472] LSM: Security Framework initializing
- [ 0.001583] Yama: becoming mindful.
- [ 0.001695] AppArmor: AppArmor initialized
- [ 0.001914] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, lin)
- [ 0.001947] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.004641] cblist_init_generic: Setting adjustable number of callback queue.
- [ 0.004657] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.004800] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.005117] rcu: Hierarchical SRCU implementation.
- [ 0.009850] EFI services will not be available.
- [ 0.010676] smp: Bringing up secondary CPUs ...
- [ 0.011628] Detected VIPT I-cache on CPU1
- [ 0.011675] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
- [ 0.011731] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
- [ 0.012721] Detected VIPT I-cache on CPU2
- [ 0.012764] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
- [ 0.012805] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
- [ 0.013736] Detected VIPT I-cache on CPU3
- [ 0.013774] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
- [ 0.013812] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
- [ 0.013947] smp: Brought up 1 node, 4 CPUs
- [ 0.013957] SMP: Total of 4 processors activated.
- [ 0.013963] CPU features: detected: 32-bit EL0 Support
- [ 0.013966] CPU features: detected: 32-bit EL1 Support
- [ 0.013971] CPU features: detected: Data cache clean to the PoU not requirede
- [ 0.013976] CPU features: detected: Common not Private translations
- [ 0.013979] CPU features: detected: CRC32 instructions
- [ 0.013985] CPU features: detected: RCpc load-acquire (LDAPR)
- [ 0.013989] CPU features: detected: LSE atomic instructions
- [ 0.013992] CPU features: detected: Privileged Access Never
- [ 0.013996] CPU features: detected: RAS Extension Support
- [ 0.014002] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
- [ 0.030237] CPU: All CPU(s) started at EL2
- [ 0.033374] devtmpfs: initialized
- [ 0.057027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.057056] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.064749] pinctrl core: initialized pinctrl subsystem
- [ 0.065600] DMI not present or invalid.
- [ 0.066554] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.068390] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
- [ 0.068687] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic alls
- [ 0.069043] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as
- [ 0.070274] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.070281] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.070285] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.070289] thermal_sys: Registered thermal governor 'user_space'
- [ 0.070930] cpuidle: using governor ladder
- [ 0.070962] cpuidle: using governor menu
- [ 0.071321] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.071494] ASID allocator initialised with 65536 entries
- [ 0.071506] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
- [ 0.071513] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
- [ 0.071518] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
- [ 0.071523] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
- [ 0.085779] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe04000p
- [ 0.113174] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
- [ 0.113946] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
- [ 0.114665] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
- [ 0.115434] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
- [ 0.116134] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
- [ 0.117441] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi
- [ 0.139943] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.139957] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.139963] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.139968] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.140928] cryptd: max_cpu_qlen set to 1000
- [ 0.142569] ACPI: Interpreter disabled.
- [ 0.145827] iommu: Default domain type: Translated
- [ 0.145838] iommu: DMA domain TLB invalidation policy: strict mode
- [ 0.146920] SCSI subsystem initialized
- [ 0.147158] libata version 3.00 loaded.
- [ 0.147488] usbcore: registered new interface driver usbfs
- [ 0.147549] usbcore: registered new interface driver hub
- [ 0.147592] usbcore: registered new device driver usb
- [ 0.148275] mc: Linux media interface: v0.10
- [ 0.148309] videodev: Linux video capture interface: v2.00
- [ 0.148379] pps_core: LinuxPPS API ver. 1 registered
- [ 0.148385] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 0.148402] PTP clock support registered
- [ 0.148716] EDAC MC: Ver: 3.0.0
- [ 0.149567] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_i6
- [ 0.149794] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
- [ 0.149878] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 )
- [ 0.149889] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware 0
- [ 0.151027] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.151870] NetLabel: Initializing
- [ 0.151875] NetLabel: domain hash size = 128
- [ 0.151880] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.151954] NetLabel: unlabeled traffic allowed by default
- [ 0.152167] vgaarb: loaded
- [ 0.152754] clocksource: Switched to clocksource arch_sys_counter
- [ 0.153154] VFS: Disk quotas dquot_6.6.0
- [ 0.153230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.154083] AppArmor: AppArmor Filesystem Enabled
- [ 0.154191] pnp: PnP ACPI: disabled
- [ 0.167482] NET: Registered PF_INET protocol family
- [ 0.167855] IP idents hash table entries: 65536 (order: 7, 524288 bytes, lin)
- [ 0.172056] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 327)
- [ 0.172209] TCP established hash table entries: 32768 (order: 6, 262144 byte)
- [ 0.172512] TCP bind bhash tables hash table entries: 32768 (order: 7, 78643)
- [ 0.173330] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.173520] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.173606] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.173982] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.174677] RPC: Registered named UNIX socket transport module.
- [ 0.174684] RPC: Registered udp transport module.
- [ 0.174687] RPC: Registered tcp transport module.
- [ 0.174690] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.174701] PCI: CLS 0 bytes, default 64
- [ 0.175370] Trying to unpack rootfs image as initramfs...
- [ 0.193948] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counte
- [ 0.194832] kvm [1]: IPA Size Limit: 40 bits
- [ 0.194890] kvm [1]: GICv3: no GICV resource entry
- [ 0.194898] kvm [1]: disabling GICv2 emulation
- [ 0.194917] kvm [1]: GIC system register CPU interface enabled
- [ 0.195098] kvm [1]: vgic interrupt IRQ9
- [ 0.195293] kvm [1]: VHE mode initialized successfully
- [ 0.198162] Initialise system trusted keyrings
- [ 0.198558] workingset: timestamp_bits=46 max_order=20 bucket_order=0
- [ 0.206419] zbud: loaded
- [ 0.210399] NFS: Registering the id_resolver key type
- [ 0.210440] Key type id_resolver registered
- [ 0.210445] Key type id_legacy registered
- [ 0.210570] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.210585] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registerin.
- [ 0.210630] ntfs: driver 2.1.32 [Flags: R/W].
- [ 0.211212] fuse: init (API version 7.36)
- [ 0.211811] SGI XFS with ACLs, security attributes, quota, no debug enabled
- [ 0.269805] NET: Registered PF_ALG protocol family
- [ 0.269831] xor: measuring software checksum speed
- [ 0.275618] 8regs : 1720 MB/sec
- [ 0.281740] 32regs : 1609 MB/sec
- [ 0.287599] arm64_neon : 1692 MB/sec
- [ 0.287611] xor: using function: 8regs (1720 MB/sec)
- [ 0.287627] Key type asymmetric registered
- [ 0.287632] Asymmetric key parser 'x509' registered
- [ 0.287774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 0.288083] io scheduler mq-deadline registered
- [ 0.288091] io scheduler kyber registered
- [ 0.288171] io scheduler bfq registered
- [ 0.306298] IPMI message handler: version 39.2
- [ 0.313075] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 0.313092] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 0.316106] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 0.316122] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 0.319040] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
- [ 0.319426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.322789] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 29, base_baud =A
- [ 0.323038] serial serial0: tty port ttyS1 registered
- [ 0.324293] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 30, base_baud =A
- [ 0.324743] printk: console [ttyS2] enabled
- [ 0.324744] printk: console [ttyS2] printing thread started
- [ 0.328523] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.342577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.342604] ehci-pci: EHCI PCI platform driver
- [ 0.342689] ehci-platform: EHCI generic platform driver
- [ 0.343088] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.343113] ohci-pci: OHCI PCI platform driver
- [ 0.343186] ohci-platform: OHCI generic platform driver
- [ 0.343474] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.344502] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 0.344768] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n1
- [ 0.344964] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 0.345036] xhci-hcd xhci-hcd.0.auto: irq 32, io mem 0xfd000000
- [ 0.345266] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 0.345315] ehci-platform fd800000.usb: EHCI Host Controller
- [ 0.345337] ohci-platform fd840000.usb: Generic Platform OHCI controller
- [ 0.345614] ehci-platform fd800000.usb: new USB bus registered, assigned bus3
- [ 0.345652] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n2
- [ 0.345674] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 0.345674] ohci-platform fd840000.usb: new USB bus registered, assigned bus4
- [ 0.345796] ehci-platform fd800000.usb: irq 33, io mem 0xfd800000
- [ 0.345836] ohci-platform fd840000.usb: irq 34, io mem 0xfd840000
- [ 0.345907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b9
- [ 0.345921] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 0.345930] usb usb1: Product: xHCI Host Controller
- [ 0.345936] usb usb1: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 xhcd
- [ 0.345943] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 0.346627] hub 1-0:1.0: USB hub found
- [ 0.346676] hub 1-0:1.0: 1 port detected
- [ 0.347215] usb usb2: We don't know the algorithms for LPM for this host, di.
- [ 0.347378] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, b9
- [ 0.347391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 0.347400] usb usb2: Product: xHCI Host Controller
- [ 0.347407] usb usb2: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 xhcd
- [ 0.347413] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 0.348025] hub 2-0:1.0: USB hub found
- [ 0.348072] hub 2-0:1.0: 1 port detected
- [ 0.348577] SPI driver max3421-hcd has no spi_device_id for maxim,max3421
- [ 0.349031] usbcore: registered new interface driver uas
- [ 0.349114] usbcore: registered new interface driver usb-storage
- [ 0.349161] usbcore: registered new interface driver ums-alauda
- [ 0.349205] usbcore: registered new interface driver ums-cypress
- [ 0.349247] usbcore: registered new interface driver ums-datafab
- [ 0.349314] usbcore: registered new interface driver ums_eneub6250
- [ 0.349356] usbcore: registered new interface driver ums-freecom
- [ 0.349400] usbcore: registered new interface driver ums-isd200
- [ 0.349440] usbcore: registered new interface driver ums-jumpshot
- [ 0.349481] usbcore: registered new interface driver ums-karma
- [ 0.349523] usbcore: registered new interface driver ums-onetouch
- [ 0.349575] usbcore: registered new interface driver ums-realtek
- [ 0.349640] usbcore: registered new interface driver ums-sddr09
- [ 0.349685] usbcore: registered new interface driver ums-sddr55
- [ 0.349729] usbcore: registered new interface driver ums-usbat
- [ 0.349872] usbcore: registered new interface driver usbserial_generic
- [ 0.349902] usbserial: USB Serial support registered for generic
- [ 0.352211] mousedev: PS/2 mouse device common for all mice
- [ 0.353227] i2c_dev: i2c /dev entries driver
- [ 0.355765] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
- [ 0.365172] rk808 0-0020: chip id: 0x8090
- [ 0.372853] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
- [ 0.373375] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, b9
- [ 0.373391] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 0.373399] usb usb3: Product: EHCI Host Controller
- [ 0.373406] usb usb3: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 ehcd
- [ 0.373413] usb usb3: SerialNumber: fd800000.usb
- [ 0.374155] hub 3-0:1.0: USB hub found
- [ 0.374225] hub 3-0:1.0: 1 port detected
- [ 0.410604] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 0.410638] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 0.417123] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, b9
- [ 0.417144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
- [ 0.417153] usb usb4: Product: Generic Platform OHCI controller
- [ 0.417160] usb usb4: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 ohcd
- [ 0.417167] usb usb4: SerialNumber: fd840000.usb
- [ 0.417963] hub 4-0:1.0: USB hub found
- [ 0.418016] hub 4-0:1.0: 1 port detected
- [ 0.496225] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-000
- [ 0.503390] device-mapper: uevent: version 1.0.3
- [ 0.503845] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-m
- [ 0.507496] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
- [ 0.509158] sdhci: Secure Digital Host Controller Interface driver
- [ 0.509167] sdhci: Copyright(c) Pierre Ossman
- [ 0.510020] Synopsys Designware Multimedia Card Interface Driver
- [ 0.510887] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.511686] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
- [ 0.511686] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
- [ 0.511715] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
- [ 0.511715] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
- [ 0.511723] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
- [ 0.511724] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
- [ 0.511779] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 65,32 bit o
- [ 0.511808] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 66,32 bit o
- [ 0.512692] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
- [ 0.512706] mmc_host mmc2: card is non-removable.
- [ 0.513542] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.513854] No iBFT detected.
- [ 0.513937] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
- [ 0.514058] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
- [ 0.514127] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
- [ 0.514290] hid: raw HID events driver (C) Jiri Kosina
- [ 0.514418] usbcore: registered new interface driver usbhid
- [ 0.514421] usbhid: USB HID core driver
- [ 0.518218] Initializing XFRM netlink socket
- [ 0.518629] NET: Registered PF_INET6 protocol family
- [ 0.528467] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz,)
- [ 0.542786] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
- [ 0.560867] Freeing initrd memory: 8288K
- [ 0.580252] Segment Routing with IPv6
- [ 0.580317] In-situ OAM (IOAM) with IPv6
- [ 0.580395] mip6: Mobile IPv6
- [ 0.580400] NET: Registered PF_PACKET protocol family
- [ 0.580579] Key type dns_resolver registered
- [ 0.581199] registered taskstats version 1
- [ 0.581214] Loading compiled-in X.509 certificates
- [ 0.581803] zswap: loaded using pool lzo/zbud
- [ 0.581949] debug_vm_pgtable: [debug_vm_pgtable ]: Validating archits
- [ 0.582234] Key type ._fscrypt registered
- [ 0.582237] Key type .fscrypt registered
- [ 0.582239] Key type fscrypt-provisioning registered
- [ 0.582666] Key type encrypted registered
- [ 0.628484] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000)
- [ 0.629495] dwmmc_rockchip fe2b0000.mmc: All phases bad!
- [ 0.629505] mmc0: tuning execution failed: -5
- [ 0.629515] mmc0: error -5 whilst initialising SD card
- [ 0.645751] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz,)
- [ 0.649081] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz,)
- [ 0.654031] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 rang:
- [ 0.654067] rockchip-dw-pcie 3c0000000.pcie: IO 0x033ef00000..0x033eff0
- [ 0.654082] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033eef0
- [ 0.654232] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled
- [ 0.654237] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outboud
- [ 0.713032] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
- [ 0.743707] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 5000000)
- [ 0.752250] usb 2-1: New USB device found, idVendor=04e8, idProduct=61f5, bc0
- [ 0.752316] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 0.752368] usb 2-1: Product: Portable SSD T5
- [ 0.752414] usb 2-1: Manufacturer: Samsung
- [ 0.752459] usb 2-1: SerialNumber: 1234567E3315
- [ 0.752535] mmc2: new high speed SDIO card at address 0001
- [ 0.759329] scsi host0: uas
- [ 0.760410] scsi 0:0:0:0: Direct-Access Samsung Portable SSD T5 0 P6
- [ 0.762612] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.762952] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466)
- [ 0.763115] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.763123] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
- [ 0.763348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
- [ 0.763530] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
- [ 0.763537] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
- [ 0.772782] rockchip-dw-pcie 3c0000000.pcie: Link up
- [ 0.772931] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
- [ 0.772941] pci_bus 0000:00: root bus resource [bus 00-0f]
- [ 0.772950] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
- [ 0.772957] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33eefffff])
- [ 0.772994] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
- [ 0.773019] pci 0000:00:00.0: reg 0x38: [mem 0x300000000-0x30000ffff pref]
- [ 0.773086] pci 0000:00:00.0: supports D1 D2
- [ 0.773092] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.778356] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus)
- [ 0.778467] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
- [ 0.778565] pci 0000:01:00.0: reg 0x10: [mem 0x300000000-0x300003fff 64bit]
- [ 0.779371] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited b)
- [ 0.810057] pci 0000:00:00.0: BAR 14: assigned [mem 0x300000000-0x3000fffff]
- [ 0.810090] pci 0000:00:00.0: BAR 6: assigned [mem 0x300100000-0x30010ffff p]
- [ 0.810117] pci 0000:01:00.0: BAR 0: assigned [mem 0x300000000-0x300003fff 6]
- [ 0.810184] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 0.810200] pci 0000:00:00.0: bridge window [mem 0x300000000-0x3000fffff]
- [ 0.810392] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
- [ 0.813113] pci 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
- [ 0.813584] nvme nvme0: pci function 0000:01:00.0
- [ 0.813696] nvme 0000:01:00.0: enabling device (0000 -> 0002)
- [ 0.823249] ALSA device list:
- [ 0.823263] No soundcards found.
- [ 0.823475] dw-apb-uart fe660000.serial: forbid DMA for kernel console
- [ 0.837258] sda: sda1
- [ 0.837889] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.905870] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000)
- [ 1.092839] usb 4-1: new full-speed USB device number 2 using ohci-platform
- [ 1.202909] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 185
- [ 1.203658] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
- [ 1.205074] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
- [ 1.211211] mmcblk0: p1 p2
- [ 1.369925] usb 4-1: New USB device found, idVendor=046d, idProduct=c52f, bc0
- [ 1.369961] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.369979] usb 4-1: Product: USB Receiver
- [ 1.369993] usb 4-1: Manufacturer: Logitech
- [ 1.379698] input: Logitech USB Receiver as /devices/platform/fd840000.usb/u1
- [ 1.380723] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mo0
- [ 1.386623] input: Logitech USB Receiver Consumer Control as /devices/platfo2
- [ 1.453982] hid-generic 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID1
- [ 3.196385] nvme nvme0: Shutdown timeout set to 8 seconds
- [ 3.213311] nvme nvme0: 4/0/0 default/read/poll queues
- [ 3.223414] nvme0n1: p1
- [ 3.224945] Freeing unused kernel memory: 3200K
- [ 3.262985] Run /init as init process
- [ 3.263000] with arguments:
- [ 3.263011] /init
- [ 3.263019] splash
- [ 3.263027] with environment:
- [ 3.263034] HOME=/
- [ 3.263041] TERM=linux
- [ 3.621178] rk808-rtc rk808-rtc: registered as rtc0
- [ 3.623830] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:08)
- [ 3.646306] rockchip-vop2 fe040000.vop: Adding to iommu group 0
- [ 3.648621] clk: couldn't set vpll clk rate to 32768 (-22), current rate: 240
- [ 3.651857] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_com)
- [ 3.653529] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11)
- [ 3.654323] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bur
- [ 3.654820] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi)
- [ 3.655605] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem 0
- [ 3.955903] Console: switching to colour frame buffer device 240x67
- [ 4.046751] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame be
- [ 4.603931] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 0
- [ 4.775083] logitech-djreceiver 0003:046D:C52F.0002: hiddev96,hidraw1: USB H1
- [ 4.845878] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD st1
- [ 4.849806] input: Logitech Wireless Mouse PID:4031 Mouse as /devices/platfo5
- [ 4.851184] input: Logitech Wireless Mouse PID:4031 Consumer Control as /dev6
- [ 4.852139] hid-generic 0003:046D:4031.0003: input,hidraw2: USB HID v1.11 Mo1
- [ 5.063156] input: Logitech M310/M310t as /devices/platform/fd840000.usb/usb0
- [ 5.064323] logitech-hidpp-device 0003:046D:4031.0003: input,hidraw2: USB HI1
- [ 5.694123] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota.
- [ 5.891897] systemd[1]: System time before build time, advancing clock.
- [ 5.919831] systemd[1]: systemd 251.2-1-arch running in system mode (+PAM +A)
- [ 5.919860] systemd[1]: Detected architecture arm64.
- [ 5.922469] systemd[1]: Hostname set to <frank-pc>.
- [ 6.424155] systemd[1]: Queued start job for default target Graphical Interf.
- [ 6.428031] systemd[1]: Created slice Slice /system/getty.
- [ 6.429808] systemd[1]: Created slice Slice /system/modprobe.
- [ 6.431312] systemd[1]: Created slice Slice /system/serial-getty.
- [ 6.432405] systemd[1]: Created slice User and Session Slice.
- [ 6.432951] systemd[1]: Started Forward Password Requests to Wall Directory .
- [ 6.433752] systemd[1]: Set up automount Arbitrary Executable File Formats F.
- [ 6.434146] systemd[1]: Reached target Local Integrity Protected Volumes.
- [ 6.434414] systemd[1]: Reached target Remote Encrypted Volumes.
- [ 6.434582] systemd[1]: Reached target Remote File Systems.
- [ 6.434742] systemd[1]: Reached target Slice Units.
- [ 6.434936] systemd[1]: Reached target Swaps.
- [ 6.435137] systemd[1]: Reached target Local Verity Protected Volumes.
- [ 6.435561] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 6.436457] systemd[1]: Listening on LVM2 poll daemon socket.
- [ 6.440522] systemd[1]: Listening on Process Core Dump Socket.
- [ 6.445348] systemd[1]: Journal Audit Socket was skipped because of a failed.
- [ 6.446025] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.446793] systemd[1]: Listening on Journal Socket.
- [ 6.447572] systemd[1]: Listening on Network Service Netlink Socket.
- [ 6.448222] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer So.
- [ 6.449583] systemd[1]: Listening on udev Control Socket.
- [ 6.450285] systemd[1]: Listening on udev Kernel Socket.
- [ 6.450943] systemd[1]: Listening on User Database Manager Socket.
- [ 6.454569] systemd[1]: Mounting Huge Pages File System...
- [ 6.458259] systemd[1]: Mounting POSIX Message Queue File System...
- [ 6.462208] systemd[1]: Mounting Kernel Debug File System...
- [ 6.462974] systemd[1]: Kernel Trace File System was skipped because of a fa.
- [ 6.467280] systemd[1]: Mounting Temporary Directory /tmp...
- [ 6.471727] systemd[1]: Starting Create List of Static Device Nodes...
- [ 6.475946] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. .
- [ 6.480321] systemd[1]: Starting Load Kernel Module configfs...
- [ 6.485110] systemd[1]: Starting Load Kernel Module drm...
- [ 6.489708] systemd[1]: Starting Load Kernel Module fuse...
- [ 6.490473] systemd[1]: File System Check on Root Device was skipped because.
- [ 6.497230] systemd[1]: Starting Journal Service...
- [ 6.504175] systemd[1]: Starting Load Kernel Modules...
- [ 6.508716] systemd[1]: Starting Generate network units from Kernel command .
- [ 6.514098] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 6.514804] systemd[1]: Repartition Root Disk was skipped because all trigge.
- [ 6.519325] systemd[1]: Starting Coldplug All udev Devices...
- [ 6.524426] systemd[1]: Starting Setup Virtual Console...
- [ 6.532459] systemd[1]: Mounted Huge Pages File System.
- [ 6.546270] EXT4-fs (sda1): re-mounted. Quota mode: none.
- [ 6.555319] systemd[1]: Mounted POSIX Message Queue File System.
- [ 6.556585] systemd[1]: Mounted Kernel Debug File System.
- [ 6.558083] systemd[1]: Mounted Temporary Directory /tmp.
- [ 6.560235] systemd[1]: Finished Create List of Static Device Nodes.
- [ 6.569103] systemd[1]: modprobe@configfs.service: Deactivated successfully.
- [ 6.569716] systemd[1]: Finished Load Kernel Module configfs.
- [ 6.571010] systemd[1]: modprobe@drm.service: Deactivated successfully.
- [ 6.571562] systemd[1]: Finished Load Kernel Module drm.
- [ 6.573573] systemd[1]: modprobe@fuse.service: Deactivated successfully.
- [ 6.574286] systemd[1]: Finished Load Kernel Module fuse.
- [ 6.576055] systemd[1]: Finished Load Kernel Modules.
- [ 6.577901] systemd[1]: Finished Generate network units from Kernel command .
- [ 6.579540] systemd[1]: Finished Remount Root and Kernel File Systems.
- [ 6.585231] systemd[1]: Mounting FUSE Control File System...
- [ 6.589976] systemd[1]: Mounting Kernel Configuration File System...
- [ 6.592096] systemd[1]: Rebuild Hardware Database was skipped because of a f.
- [ 6.592381] systemd[1]: Platform Persistent Storage Archival was skipped bec.
- [ 6.596478] systemd[1]: Starting Load/Save Random Seed...
- [ 6.601391] systemd[1]: Starting Apply Kernel Variables...
- [ 6.604018] systemd[1]: Create System Users was skipped because of a failed .
- [ 6.619752] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 6.627878] systemd[1]: Mounted FUSE Control File System.
- [ 6.629828] systemd[1]: Mounted Kernel Configuration File System.
- [ 6.661253] systemd[1]: Finished Apply Kernel Variables.
- [ 6.696812] systemd[1]: Finished Create Static Device Nodes in /dev.
- [ 6.703769] systemd[1]: Starting Rule-based Manager for Device Events and Fi.
- [ 6.723892] systemd[1]: Started Journal Service.
- [ 6.752515] systemd-journald[299]: Received client request to flush runtime .
- [ 6.761876] systemd-journald[299]: File /var/log/journal/2a704f1c4bed414ca1d.
- [ 7.537366] panfrost fde60000.gpu: clock rate = 594000000
- [ 7.537390] panfrost fde60000.gpu: bus_clock rate = 500000000
- [ 7.559099] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 st0
- [ 7.559112] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000
- [ 7.559117] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x000000027
- [ 7.559122] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
- [ 7.582896] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on mi1
- [ 7.613541] Registered IR keymap rc-cec
- [ 7.620363] rc rc0: dw_hdmi as /devices/platform/fe0a0000.hdmi/rc/rc0
- [ 7.620518] input: dw_hdmi as /devices/platform/fe0a0000.hdmi/rc/rc0/input11
- [ 7.662979] at24 0-0050: supply vcc not found, using dummy regulator
- [ 7.814025] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
- [ 7.814396] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
- [ 7.814403] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
- [ 7.814407] rk_gmac-dwmac fe010000.ethernet: RX delay(0x24).
- [ 7.814415] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
- [ 7.814450] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
- [ 7.819797] rk_gmac-dwmac fe010000.ethernet: init for RGMII
- [ 7.820647] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
- [ 7.820661] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
- [ 7.820666] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register suppd
- [ 7.820670] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine suppd
- [ 7.820672] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
- [ 7.820675] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
- [ 7.885587] rockchip-thermal fe710000.tsadc: Missing tshut mode property, us)
- [ 7.885599] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property)
- [ 7.891730] at24 0-0050: 2048 byte bl24c16a EEPROM, writable, 16 bytes/write
- [ 7.934232] rk_gmac-dwmac fe010000.ethernet: TSO supported
- [ 7.934243] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watr
- [ 7.934252] rk_gmac-dwmac fe010000.ethernet: device MAC address a2:b2:43:49:7
- [ 7.934259] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
- [ 7.934265] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
- [ 7.934269] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
- [ 8.403386] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio 6
- [ 8.404048] usbcore: registered new interface driver brcmfmac
- [ 8.405102] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43452
- [ 8.514023] Bluetooth: Core ver 2.22
- [ 8.516108] NET: Registered PF_BLUETOOTH protocol family
- [ 8.516116] Bluetooth: HCI device and connection manager initialized
- [ 8.516131] Bluetooth: HCI socket layer initialized
- [ 8.516137] Bluetooth: L2CAP socket layer initialized
- [ 8.516162] Bluetooth: SCO socket layer initialized
- [ 8.555338] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio 6
- [ 8.560174] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 152
- [ 8.729114] Bluetooth: HCI UART driver ver 2.3
- [ 8.729128] Bluetooth: HCI UART protocol H4 registered
- [ 8.729131] Bluetooth: HCI UART protocol BCSP registered
- [ 8.739185] Bluetooth: HCI UART protocol LL registered
- [ 8.739197] Bluetooth: HCI UART protocol ATH3K registered
- [ 8.746414] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 8.756357] Bluetooth: HCI UART protocol Intel registered
- [ 8.786964] Bluetooth: HCI UART protocol Broadcom registered
- [ 8.796430] Bluetooth: HCI UART protocol QCA registered
- [ 8.807151] Bluetooth: HCI UART protocol Marvell registered
- [ 8.897392] of_dma_request_slave_channel: dma-names property of node '/seriay
- [ 8.897418] dw-apb-uart fe650000.serial: failed to request DMA
- [ 9.137053] Bluetooth: hci0: BCM: chip id 107
- [ 9.139261] Bluetooth: hci0: BCM: features 0x2f
- [ 9.162303] Bluetooth: hci0: BCM4345C0
- [ 9.162313] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
- [ 9.162589] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
- [ 9.162592] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.pine64,quartz64-b.hcd'
- [ 9.162594] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
- [ 9.162597] Bluetooth: hci0: BCM: 'brcm/BCM.pine64,quartz64-b.hcd'
- [ 9.162599] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
- [ 9.266025] random: crng init done
- [ 9.448544] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data.
- [ 9.985685] zram: Added device: zram0
- [ 9.997849] zram0: detected capacity change from 0 to 11486640
- [ 10.038698] Adding 5743316k swap on /dev/zram0. Priority:100 extents:1 acroS
- [ 10.063921] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 10.063935] Bluetooth: BNEP filters: protocol multicast
- [ 10.063948] Bluetooth: BNEP socket layer initialized
- [ 11.560212] bpfilter: Loaded bpfilter_umh pid 441
- [ 11.561212] Started bpfilter
- [ 11.952844] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-0:01] driver [)
- [ 12.073061] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POO0
- [ 12.082833] dwmac4: Master AXI performs any burst length
- [ 12.082858] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features supportd
- [ 12.082885] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Tid
- [ 12.083141] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
- [ 12.083526] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii e
- [ 16.317111] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - x
- [ 16.317148] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 22.154430] systemd-journald[299]: File /var/log/journal/2a704f1c4bed414ca1d.
- [ 74.534000] logitech-hidpp-device 0003:046D:4031.0003: HID++ 2.0 device conn.
- [ 122.646396] usb 4-1: USB disconnect, device number 2
- [ 130.564013] usb 4-1: new low-speed USB device number 3 using ohci-platform
- [ 130.836082] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bc0
- [ 130.836118] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 130.836136] usb 4-1: Product: USB Keyboard
- [ 130.836149] usb 4-1: Manufacturer: Logitech
- [ 130.850959] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/u2
- [ 130.916013] hid-generic 0003:046D:C31C.0004: input,hidraw0: USB HID v1.10 Ke0
- [ 130.929941] input: Logitech USB Keyboard Consumer Control as /devices/platfo3
- [ 130.994834] input: Logitech USB Keyboard System Control as /devices/platform4
- [ 130.995637] hid-generic 0003:046D:C31C.0005: input,hidraw1: USB HID v1.10 De1
- [ 157.320454] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. .
- [ 164.387657] usb 4-1: USB disconnect, device number 3
- [ 174.531661] usb 4-1: new low-speed USB device number 4 using ohci-platform
- [ 174.803954] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bc0
- [ 174.803982] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 174.803994] usb 4-1: Product: USB Keyboard
- [ 174.804004] usb 4-1: Manufacturer: Logitech
- [ 174.821745] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/u5
- [ 174.893974] hid-generic 0003:046D:C31C.0006: input,hidraw0: USB HID v1.10 Ke0
- [ 174.905594] input: Logitech USB Keyboard Consumer Control as /devices/platfo6
- [ 174.972573] input: Logitech USB Keyboard System Control as /devices/platform7
- [ 174.973494] hid-generic 0003:046D:C31C.0007: input,hidraw1: USB HID v1.10 De1
- [ 182.446355] usb 4-1: USB disconnect, device number 4
- [ 183.491196] usb 4-1: new low-speed USB device number 5 using ohci-platform
- [ 183.763797] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bc0
- [ 183.763831] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 183.763849] usb 4-1: Product: USB Keyboard
- [ 183.763862] usb 4-1: Manufacturer: Logitech
- [ 183.781441] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/u8
- [ 183.853175] hid-generic 0003:046D:C31C.0008: input,hidraw0: USB HID v1.10 Ke0
- [ 183.867152] input: Logitech USB Keyboard Consumer Control as /devices/platfo9
- [ 183.931936] input: Logitech USB Keyboard System Control as /devices/platform0
- [ 183.932792] hid-generic 0003:046D:C31C.0009: input,hidraw1: USB HID v1.10 De1
- [ 196.840893] usb 4-1: USB disconnect, device number 5
- [ 205.530354] usb 4-1: new low-speed USB device number 6 using ohci-platform
- [ 205.802466] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bc0
- [ 205.802500] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 205.802518] usb 4-1: Product: USB Keyboard
- [ 205.802531] usb 4-1: Manufacturer: Logitech
- [ 205.821248] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/u1
- [ 205.892138] hid-generic 0003:046D:C31C.000A: input,hidraw0: USB HID v1.10 Ke0
- [ 205.904257] input: Logitech USB Keyboard Consumer Control as /devices/platfo2
- [ 205.971179] input: Logitech USB Keyboard System Control as /devices/platform3
- [ 205.972017] hid-generic 0003:046D:C31C.000B: input,hidraw1: USB HID v1.10 De1
- [ 216.972784] usb 4-1: USB disconnect, device number 6
- [ 232.709689] usb 4-1: new full-speed USB device number 7 using ohci-platform
- [ 232.987013] usb 4-1: New USB device found, idVendor=046d, idProduct=c52f, bc0
- [ 232.987049] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 232.987068] usb 4-1: Product: USB Receiver
- [ 232.987081] usb 4-1: Manufacturer: Logitech
- [ 232.996718] logitech-djreceiver 0003:046D:C52F.000C: hidraw0: USB HID v1.11 0
- [ 233.066034] logitech-djreceiver 0003:046D:C52F.000D: hiddev96,hidraw1: USB H1
- [ 233.132957] logitech-djreceiver 0003:046D:C52F.000D: device of type eQUAD st1
- [ 233.143734] input: Logitech M310/M310t as /devices/platform/fd840000.usb/usb4
- [ 233.144501] logitech-hidpp-device 0003:046D:4031.000E: input,hidraw2: USB HI1
- [ 235.015171] logitech-hidpp-device 0003:046D:4031.000E: HID++ 2.0 device conn.
- [ 243.669592] INFO: task kworker/u9:0:82 blocked for more than 122 seconds.
- [ 243.669625] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 243.669634] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 243.669641] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 243.669663] Workqueue: hci0 hci_power_on [bluetooth]
- [ 243.669863] Call trace:
- [ 243.669869] __switch_to+0xb8/0xf0
- [ 243.669889] __schedule+0x26c/0x680
- [ 243.669902] schedule+0x54/0xd0
- [ 243.669912] schedule_timeout+0xc0/0xf0
- [ 243.669924] __wait_for_common+0xb0/0x1d0
- [ 243.669935] wait_for_completion+0x20/0x30
- [ 243.669945] __flush_work.isra.0+0x13c/0x25c
- [ 243.669959] __cancel_work_timer+0x110/0x190
- [ 243.669971] cancel_work_sync+0x14/0x20
- [ 243.669983] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 243.670170] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 243.670353] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 243.670534] process_one_work+0x1a4/0x300
- [ 243.670547] worker_thread+0x6c/0x40c
- [ 243.670558] kthread+0xe4/0xf0
- [ 243.670570] ret_from_fork+0x10/0x20
- [ 269.428861] usb 4-1: USB disconnect, device number 7
- [ 277.678935] usb 3-1: new high-speed USB device number 7 using ehci-platform
- [ 277.900756] usb 3-1: New USB device found, idVendor=0bda, idProduct=5411, bc4
- [ 277.900785] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 277.900798] usb 3-1: Product: 4-Port USB 2.0 Hub
- [ 277.900808] usb 3-1: Manufacturer: Generic
- [ 277.902335] hub 3-1:1.0: USB hub found
- [ 277.903014] hub 3-1:1.0: 4 ports detected
- [ 282.709026] usb 3-1.1: new full-speed USB device number 8 using ehci-platform
- [ 282.862697] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c52f, 0
- [ 282.862731] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumbe0
- [ 282.862750] usb 3-1.1: Product: USB Receiver
- [ 282.862763] usb 3-1.1: Manufacturer: Logitech
- [ 282.868762] logitech-djreceiver 0003:046D:C52F.000F: hidraw0: USB HID v1.11 0
- [ 282.944608] logitech-djreceiver 0003:046D:C52F.0010: hiddev96,hidraw1: USB H1
- [ 283.010022] logitech-djreceiver 0003:046D:C52F.0010: device of type eQUAD st1
- [ 283.018651] input: Logitech M310/M310t as /devices/platform/fd800000.usb/usb5
- [ 283.019576] logitech-hidpp-device 0003:046D:4031.0011: input,hidraw2: USB HI1
- [ 286.260192] logitech-hidpp-device 0003:046D:4031.0011: HID++ 2.0 device conn.
- [ 308.389125] usb 3-1.3: new low-speed USB device number 9 using ehci-platform
- [ 308.545453] usb 3-1.3: New USB device found, idVendor=046d, idProduct=c31c, 0
- [ 308.545491] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumbe0
- [ 308.545509] usb 3-1.3: Product: USB Keyboard
- [ 308.545522] usb 3-1.3: Manufacturer: Logitech
- [ 308.554650] input: Logitech USB Keyboard as /devices/platform/fd800000.usb/u6
- [ 308.621444] hid-generic 0003:046D:C31C.0012: input,hidraw3: USB HID v1.10 Ke0
- [ 308.631252] input: Logitech USB Keyboard Consumer Control as /devices/platfo7
- [ 308.699986] input: Logitech USB Keyboard System Control as /devices/platform8
- [ 308.700869] hid-generic 0003:046D:C31C.0013: input,hidraw4: USB HID v1.10 De1
- [ 366.549060] INFO: task kworker/u9:0:82 blocked for more than 245 seconds.
- [ 366.549101] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 366.549113] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 366.549120] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 366.549151] Workqueue: hci0 hci_power_on [bluetooth]
- [ 366.549426] Call trace:
- [ 366.549434] __switch_to+0xb8/0xf0
- [ 366.549460] __schedule+0x26c/0x680
- [ 366.549476] schedule+0x54/0xd0
- [ 366.549489] schedule_timeout+0xc0/0xf0
- [ 366.549505] __wait_for_common+0xb0/0x1d0
- [ 366.549519] wait_for_completion+0x20/0x30
- [ 366.549533] __flush_work.isra.0+0x13c/0x25c
- [ 366.549552] __cancel_work_timer+0x110/0x190
- [ 366.549567] cancel_work_sync+0x14/0x20
- [ 366.549582] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 366.549834] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 366.550076] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 366.550322] process_one_work+0x1a4/0x300
- [ 366.550340] worker_thread+0x6c/0x40c
- [ 366.550355] kthread+0xe4/0xf0
- [ 366.550370] ret_from_fork+0x10/0x20
- [ 489.428025] INFO: task kworker/u9:0:82 blocked for more than 368 seconds.
- [ 489.428069] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 489.428081] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 489.428090] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 489.428122] Workqueue: hci0 hci_power_on [bluetooth]
- [ 489.428399] Call trace:
- [ 489.428408] __switch_to+0xb8/0xf0
- [ 489.428434] __schedule+0x26c/0x680
- [ 489.428449] schedule+0x54/0xd0
- [ 489.428464] schedule_timeout+0xc0/0xf0
- [ 489.428480] __wait_for_common+0xb0/0x1d0
- [ 489.428496] wait_for_completion+0x20/0x30
- [ 489.428510] __flush_work.isra.0+0x13c/0x25c
- [ 489.428529] __cancel_work_timer+0x110/0x190
- [ 489.428545] cancel_work_sync+0x14/0x20
- [ 489.428560] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 489.428811] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 489.429055] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 489.429298] process_one_work+0x1a4/0x300
- [ 489.429315] worker_thread+0x6c/0x40c
- [ 489.429331] kthread+0xe4/0xf0
- [ 489.429346] ret_from_fork+0x10/0x20
- [ 612.305898] INFO: task kworker/u9:0:82 blocked for more than 491 seconds.
- [ 612.305953] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 612.305969] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 612.305981] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 612.306023] Workqueue: hci0 hci_power_on [bluetooth]
- [ 612.306415] Call trace:
- [ 612.306426] __switch_to+0xb8/0xf0
- [ 612.306464] __schedule+0x26c/0x680
- [ 612.306487] schedule+0x54/0xd0
- [ 612.306507] schedule_timeout+0xc0/0xf0
- [ 612.306530] __wait_for_common+0xb0/0x1d0
- [ 612.306552] wait_for_completion+0x20/0x30
- [ 612.306572] __flush_work.isra.0+0x13c/0x25c
- [ 612.306599] __cancel_work_timer+0x110/0x190
- [ 612.306624] cancel_work_sync+0x14/0x20
- [ 612.306646] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 612.307015] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 612.307372] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 612.307730] process_one_work+0x1a4/0x300
- [ 612.307757] worker_thread+0x6c/0x40c
- [ 612.307778] kthread+0xe4/0xf0
- [ 612.307799] ret_from_fork+0x10/0x20
- [ 735.183934] INFO: task kworker/u9:0:82 blocked for more than 614 seconds.
- [ 735.183990] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 735.184009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 735.184020] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 735.184062] Workqueue: hci0 hci_power_on [bluetooth]
- [ 735.184449] Call trace:
- [ 735.184461] __switch_to+0xb8/0xf0
- [ 735.184496] __schedule+0x26c/0x680
- [ 735.184519] schedule+0x54/0xd0
- [ 735.184539] schedule_timeout+0xc0/0xf0
- [ 735.184562] __wait_for_common+0xb0/0x1d0
- [ 735.184585] wait_for_completion+0x20/0x30
- [ 735.184606] __flush_work.isra.0+0x13c/0x25c
- [ 735.184632] __cancel_work_timer+0x110/0x190
- [ 735.184654] cancel_work_sync+0x14/0x20
- [ 735.184676] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 735.185048] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 735.185406] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 735.185763] process_one_work+0x1a4/0x300
- [ 735.185788] worker_thread+0x6c/0x40c
- [ 735.185810] kthread+0xe4/0xf0
- [ 735.185832] ret_from_fork+0x10/0x20
- [ 858.062279] INFO: task kworker/u9:0:82 blocked for more than 737 seconds.
- [ 858.062333] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 858.062349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 858.062360] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 858.062402] Workqueue: hci0 hci_power_on [bluetooth]
- [ 858.062789] Call trace:
- [ 858.062801] __switch_to+0xb8/0xf0
- [ 858.062837] __schedule+0x26c/0x680
- [ 858.062859] schedule+0x54/0xd0
- [ 858.062879] schedule_timeout+0xc0/0xf0
- [ 858.062903] __wait_for_common+0xb0/0x1d0
- [ 858.062926] wait_for_completion+0x20/0x30
- [ 858.062945] __flush_work.isra.0+0x13c/0x25c
- [ 858.062972] __cancel_work_timer+0x110/0x190
- [ 858.062995] cancel_work_sync+0x14/0x20
- [ 858.063017] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 858.063383] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 858.063741] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 858.064099] process_one_work+0x1a4/0x300
- [ 858.064126] worker_thread+0x6c/0x40c
- [ 858.064148] kthread+0xe4/0xf0
- [ 858.064170] ret_from_fork+0x10/0x20
- [ 980.940698] INFO: task kworker/u9:0:82 blocked for more than 860 seconds.
- [ 980.940745] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 980.940761] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 980.940773] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 980.940816] Workqueue: hci0 hci_power_on [bluetooth]
- [ 980.941209] Call trace:
- [ 980.941220] __switch_to+0xb8/0xf0
- [ 980.941256] __schedule+0x26c/0x680
- [ 980.941279] schedule+0x54/0xd0
- [ 980.941299] schedule_timeout+0xc0/0xf0
- [ 980.941322] __wait_for_common+0xb0/0x1d0
- [ 980.941344] wait_for_completion+0x20/0x30
- [ 980.941363] __flush_work.isra.0+0x13c/0x25c
- [ 980.941389] __cancel_work_timer+0x110/0x190
- [ 980.941412] cancel_work_sync+0x14/0x20
- [ 980.941434] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 980.941805] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 980.942162] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 980.942518] process_one_work+0x1a4/0x300
- [ 980.942545] worker_thread+0x6c/0x40c
- [ 980.942569] kthread+0xe4/0xf0
- [ 980.942590] ret_from_fork+0x10/0x20
- [ 1103.818454] INFO: task kworker/u9:0:82 blocked for more than 983 seconds.
- [ 1103.818475] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 1103.818480] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 1103.818483] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 1103.818496] Workqueue: hci0 hci_power_on [bluetooth]
- [ 1103.818601] Call trace:
- [ 1103.818604] __switch_to+0xb8/0xf0
- [ 1103.818618] __schedule+0x26c/0x680
- [ 1103.818623] schedule+0x54/0xd0
- [ 1103.818628] schedule_timeout+0xc0/0xf0
- [ 1103.818634] __wait_for_common+0xb0/0x1d0
- [ 1103.818639] wait_for_completion+0x20/0x30
- [ 1103.818644] __flush_work.isra.0+0x13c/0x25c
- [ 1103.818652] __cancel_work_timer+0x110/0x190
- [ 1103.818658] cancel_work_sync+0x14/0x20
- [ 1103.818663] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 1103.818748] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 1103.818829] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 1103.818910] process_one_work+0x1a4/0x300
- [ 1103.818918] worker_thread+0x6c/0x40c
- [ 1103.818923] kthread+0xe4/0xf0
- [ 1103.818929] ret_from_fork+0x10/0x20
- [ 1226.695935] INFO: task kworker/u9:0:82 blocked for more than 1105 seconds.
- [ 1226.695969] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 1226.695975] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 1226.695980] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 1226.695996] Workqueue: hci0 hci_power_on [bluetooth]
- [ 1226.696133] Call trace:
- [ 1226.696136] __switch_to+0xb8/0xf0
- [ 1226.696153] __schedule+0x26c/0x680
- [ 1226.696159] schedule+0x54/0xd0
- [ 1226.696165] schedule_timeout+0xc0/0xf0
- [ 1226.696171] __wait_for_common+0xb0/0x1d0
- [ 1226.696176] wait_for_completion+0x20/0x30
- [ 1226.696182] __flush_work.isra.0+0x13c/0x25c
- [ 1226.696192] __cancel_work_timer+0x110/0x190
- [ 1226.696198] cancel_work_sync+0x14/0x20
- [ 1226.696203] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 1226.696291] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 1226.696373] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 1226.696457] process_one_work+0x1a4/0x300
- [ 1226.696466] worker_thread+0x6c/0x40c
- [ 1226.696472] kthread+0xe4/0xf0
- [ 1226.696477] ret_from_fork+0x10/0x20
- [ 1349.573705] INFO: task kworker/u9:0:82 blocked for more than 1228 seconds.
- [ 1349.573726] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 1349.573731] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this.
- [ 1349.573734] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 f8
- [ 1349.573747] Workqueue: hci0 hci_power_on [bluetooth]
- [ 1349.573857] Call trace:
- [ 1349.573859] __switch_to+0xb8/0xf0
- [ 1349.573871] __schedule+0x26c/0x680
- [ 1349.573877] schedule+0x54/0xd0
- [ 1349.573881] schedule_timeout+0xc0/0xf0
- [ 1349.573887] __wait_for_common+0xb0/0x1d0
- [ 1349.573892] wait_for_completion+0x20/0x30
- [ 1349.573897] __flush_work.isra.0+0x13c/0x25c
- [ 1349.573904] __cancel_work_timer+0x110/0x190
- [ 1349.573910] cancel_work_sync+0x14/0x20
- [ 1349.573915] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 1349.574002] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 1349.574085] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 1349.574166] process_one_work+0x1a4/0x300
- [ 1349.574172] worker_thread+0x6c/0x40c
- [ 1349.574178] kthread+0xe4/0xf0
- [ 1349.574184] ret_from_fork+0x10/0x20
- [ 2034.937160] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. .
- [root@frank-pc ~]#
- [root@frank-pc ~]# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
- [ 0.000000] Linux version 5.19.0-rc1-0.1-MANJARO-ARM-Q64 (builduser@fh-mjr-build-lon-large) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Thu Jun 9 02
- [ 0.000000] Machine model: Pine64 RK3566 Quartz64-B Board
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
- [ 0.000000] cma: Reserved 256 MiB at 0x00000000d9a00000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] percpu: Embedded 20 pages/cpu s42152 r8192 d31576 u81920
- [ 0.000000] pcpu-alloc: s42152 r8192 d31576 u81920 alloc=20*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Virtualization Host Extensions
- [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.000000] alternatives: patching kernel code
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176
- [ 0.000000] Kernel command line: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=032af10e-1655-e545-99d1-af2bb1c43033 rw rootwait audit=0 splash plyms
- [ 0.000000] audit: disabled (until reboot)
- [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 3555248K/3930112K available (15808K kernel code, 2056K rwdata, 6244K rodata, 3200K init, 675K bss, 112720K reserved, 262144K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 320 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: MBI range [296:319]
- [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
- [ 0.000000] Root IRQ handler: gic_handle_irq
- [ 0.000000] GICv3: GICv3 features: 16 PPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.001140] Console: colour dummy device 80x25
- [ 0.001205] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.001223] pid_max: default: 32768 minimum: 301
- [ 0.001472] LSM: Security Framework initializing
- [ 0.001583] Yama: becoming mindful.
- [ 0.001695] AppArmor: AppArmor initialized
- [ 0.001914] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.001947] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.004641] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.004657] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.004800] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.005117] rcu: Hierarchical SRCU implementation.
- [ 0.009850] EFI services will not be available.
- [ 0.010676] smp: Bringing up secondary CPUs ...
- [ 0.011628] Detected VIPT I-cache on CPU1
- [ 0.011675] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
- [ 0.011731] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
- [ 0.012721] Detected VIPT I-cache on CPU2
- [ 0.012764] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
- [ 0.012805] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
- [ 0.013736] Detected VIPT I-cache on CPU3
- [ 0.013774] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
- [ 0.013812] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
- [ 0.013947] smp: Brought up 1 node, 4 CPUs
- [ 0.013957] SMP: Total of 4 processors activated.
- [ 0.013963] CPU features: detected: 32-bit EL0 Support
- [ 0.013966] CPU features: detected: 32-bit EL1 Support
- [ 0.013971] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
- [ 0.013976] CPU features: detected: Common not Private translations
- [ 0.013979] CPU features: detected: CRC32 instructions
- [ 0.013985] CPU features: detected: RCpc load-acquire (LDAPR)
- [ 0.013989] CPU features: detected: LSE atomic instructions
- [ 0.013992] CPU features: detected: Privileged Access Never
- [ 0.013996] CPU features: detected: RAS Extension Support
- [ 0.014002] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
- [ 0.030237] CPU: All CPU(s) started at EL2
- [ 0.033374] devtmpfs: initialized
- [ 0.057027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.057056] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.064749] pinctrl core: initialized pinctrl subsystem
- [ 0.065600] DMI not present or invalid.
- [ 0.066554] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.068390] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
- [ 0.068687] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.069043] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.070274] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.070281] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.070285] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.070289] thermal_sys: Registered thermal governor 'user_space'
- [ 0.070930] cpuidle: using governor ladder
- [ 0.070962] cpuidle: using governor menu
- [ 0.071321] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.071494] ASID allocator initialised with 65536 entries
- [ 0.071506] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
- [ 0.071513] HugeTLB: can optimize 127 vmemmap pages for hugepages-32768kB
- [ 0.071518] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
- [ 0.071523] HugeTLB: can optimize 0 vmemmap pages for hugepages-64kB
- [ 0.085779] platform fe0a0000.hdmi: Fixing up cyclic dependency with fe040000.vop
- [ 0.113174] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
- [ 0.113946] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
- [ 0.114665] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
- [ 0.115434] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
- [ 0.116134] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
- [ 0.117441] platform hdmi-con: Fixing up cyclic dependency with fe0a0000.hdmi
- [ 0.139943] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.139957] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.139963] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.139968] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.140928] cryptd: max_cpu_qlen set to 1000
- [ 0.142569] ACPI: Interpreter disabled.
- [ 0.145827] iommu: Default domain type: Translated
- [ 0.145838] iommu: DMA domain TLB invalidation policy: strict mode
- [ 0.146920] SCSI subsystem initialized
- [ 0.147158] libata version 3.00 loaded.
- [ 0.147488] usbcore: registered new interface driver usbfs
- [ 0.147549] usbcore: registered new interface driver hub
- [ 0.147592] usbcore: registered new device driver usb
- [ 0.148275] mc: Linux media interface: v0.10
- [ 0.148309] videodev: Linux video capture interface: v2.00
- [ 0.148379] pps_core: LinuxPPS API ver. 1 registered
- [ 0.148385] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.148402] PTP clock support registered
- [ 0.148716] EDAC MC: Ver: 3.0.0
- [ 0.149567] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
- [ 0.149794] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
- [ 0.149878] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:1)
- [ 0.149889] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
- [ 0.151027] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.151870] NetLabel: Initializing
- [ 0.151875] NetLabel: domain hash size = 128
- [ 0.151880] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.151954] NetLabel: unlabeled traffic allowed by default
- [ 0.152167] vgaarb: loaded
- [ 0.152754] clocksource: Switched to clocksource arch_sys_counter
- [ 0.153154] VFS: Disk quotas dquot_6.6.0
- [ 0.153230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.154083] AppArmor: AppArmor Filesystem Enabled
- [ 0.154191] pnp: PnP ACPI: disabled
- [ 0.167482] NET: Registered PF_INET protocol family
- [ 0.167855] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.172056] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 0.172209] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 0.172512] TCP bind bhash tables hash table entries: 32768 (order: 7, 786432 bytes, linear)
- [ 0.173330] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.173520] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.173606] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.173982] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.174677] RPC: Registered named UNIX socket transport module.
- [ 0.174684] RPC: Registered udp transport module.
- [ 0.174687] RPC: Registered tcp transport module.
- [ 0.174690] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.174701] PCI: CLS 0 bytes, default 64
- [ 0.175370] Trying to unpack rootfs image as initramfs...
- [ 0.193948] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
- [ 0.194832] kvm [1]: IPA Size Limit: 40 bits
- [ 0.194890] kvm [1]: GICv3: no GICV resource entry
- [ 0.194898] kvm [1]: disabling GICv2 emulation
- [ 0.194917] kvm [1]: GIC system register CPU interface enabled
- [ 0.195098] kvm [1]: vgic interrupt IRQ9
- [ 0.195293] kvm [1]: VHE mode initialized successfully
- [ 0.198162] Initialise system trusted keyrings
- [ 0.198558] workingset: timestamp_bits=46 max_order=20 bucket_order=0
- [ 0.206419] zbud: loaded
- [ 0.210399] NFS: Registering the id_resolver key type
- [ 0.210440] Key type id_resolver registered
- [ 0.210445] Key type id_legacy registered
- [ 0.210570] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.210585] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 0.210630] ntfs: driver 2.1.32 [Flags: R/W].
- [ 0.211212] fuse: init (API version 7.36)
- [ 0.211811] SGI XFS with ACLs, security attributes, quota, no debug enabled
- [ 0.269805] NET: Registered PF_ALG protocol family
- [ 0.269831] xor: measuring software checksum speed
- [ 0.275618] 8regs : 1720 MB/sec
- [ 0.281740] 32regs : 1609 MB/sec
- [ 0.287599] arm64_neon : 1692 MB/sec
- [ 0.287611] xor: using function: 8regs (1720 MB/sec)
- [ 0.287627] Key type asymmetric registered
- [ 0.287632] Asymmetric key parser 'x509' registered
- [ 0.287774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
- [ 0.288083] io scheduler mq-deadline registered
- [ 0.288091] io scheduler kyber registered
- [ 0.288171] io scheduler bfq registered
- [ 0.306298] IPMI message handler: version 39.2
- [ 0.313075] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.313092] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.316106] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.316122] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.319040] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
- [ 0.319426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.322789] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 29, base_baud = 1500000) is a 16550A
- [ 0.323038] serial serial0: tty port ttyS1 registered
- [ 0.324293] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 30, base_baud = 1500000) is a 16550A
- [ 0.324743] printk: console [ttyS2] enabled
- [ 0.324744] printk: console [ttyS2] printing thread started
- [ 0.328523] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.342577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.342604] ehci-pci: EHCI PCI platform driver
- [ 0.342689] ehci-platform: EHCI generic platform driver
- [ 0.343088] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.343113] ohci-pci: OHCI PCI platform driver
- [ 0.343186] ohci-platform: OHCI generic platform driver
- [ 0.343474] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.344502] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 0.344768] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 0.344964] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 0.345036] xhci-hcd xhci-hcd.0.auto: irq 32, io mem 0xfd000000
- [ 0.345266] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 0.345315] ehci-platform fd800000.usb: EHCI Host Controller
- [ 0.345337] ohci-platform fd840000.usb: Generic Platform OHCI controller
- [ 0.345614] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 3
- [ 0.345652] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 0.345674] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 0.345674] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 4
- [ 0.345796] ehci-platform fd800000.usb: irq 33, io mem 0xfd800000
- [ 0.345836] ohci-platform fd840000.usb: irq 34, io mem 0xfd840000
- [ 0.345907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
- [ 0.345921] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.345930] usb usb1: Product: xHCI Host Controller
- [ 0.345936] usb usb1: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 xhci-hcd
- [ 0.345943] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 0.346627] hub 1-0:1.0: USB hub found
- [ 0.346676] hub 1-0:1.0: 1 port detected
- [ 0.347215] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 0.347378] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
- [ 0.347391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.347400] usb usb2: Product: xHCI Host Controller
- [ 0.347407] usb usb2: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 xhci-hcd
- [ 0.347413] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 0.348025] hub 2-0:1.0: USB hub found
- [ 0.348072] hub 2-0:1.0: 1 port detected
- [ 0.348577] SPI driver max3421-hcd has no spi_device_id for maxim,max3421
- [ 0.349031] usbcore: registered new interface driver uas
- [ 0.349114] usbcore: registered new interface driver usb-storage
- [ 0.349161] usbcore: registered new interface driver ums-alauda
- [ 0.349205] usbcore: registered new interface driver ums-cypress
- [ 0.349247] usbcore: registered new interface driver ums-datafab
- [ 0.349314] usbcore: registered new interface driver ums_eneub6250
- [ 0.349356] usbcore: registered new interface driver ums-freecom
- [ 0.349400] usbcore: registered new interface driver ums-isd200
- [ 0.349440] usbcore: registered new interface driver ums-jumpshot
- [ 0.349481] usbcore: registered new interface driver ums-karma
- [ 0.349523] usbcore: registered new interface driver ums-onetouch
- [ 0.349575] usbcore: registered new interface driver ums-realtek
- [ 0.349640] usbcore: registered new interface driver ums-sddr09
- [ 0.349685] usbcore: registered new interface driver ums-sddr55
- [ 0.349729] usbcore: registered new interface driver ums-usbat
- [ 0.349872] usbcore: registered new interface driver usbserial_generic
- [ 0.349902] usbserial: USB Serial support registered for generic
- [ 0.352211] mousedev: PS/2 mouse device common for all mice
- [ 0.353227] i2c_dev: i2c /dev entries driver
- [ 0.355765] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
- [ 0.365172] rk808 0-0020: chip id: 0x8090
- [ 0.372853] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
- [ 0.373375] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
- [ 0.373391] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.373399] usb usb3: Product: EHCI Host Controller
- [ 0.373406] usb usb3: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 ehci_hcd
- [ 0.373413] usb usb3: SerialNumber: fd800000.usb
- [ 0.374155] hub 3-0:1.0: USB hub found
- [ 0.374225] hub 3-0:1.0: 1 port detected
- [ 0.410604] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 0.410638] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 0.417123] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
- [ 0.417144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.417153] usb usb4: Product: Generic Platform OHCI controller
- [ 0.417160] usb usb4: Manufacturer: Linux 5.19.0-rc1-0.1-MANJARO-ARM-Q64 ohci_hcd
- [ 0.417167] usb usb4: SerialNumber: fd840000.usb
- [ 0.417963] hub 4-0:1.0: USB hub found
- [ 0.418016] hub 4-0:1.0: 1 port detected
- [ 0.496225] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
- [ 0.503390] device-mapper: uevent: version 1.0.3
- [ 0.503845] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
- [ 0.507496] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
- [ 0.509158] sdhci: Secure Digital Host Controller Interface driver
- [ 0.509167] sdhci: Copyright(c) Pierre Ossman
- [ 0.510020] Synopsys Designware Multimedia Card Interface Driver
- [ 0.510887] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.511686] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
- [ 0.511686] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
- [ 0.511715] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
- [ 0.511715] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
- [ 0.511723] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
- [ 0.511724] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
- [ 0.511779] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo
- [ 0.511808] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 66,32 bit host data width,256 deep fifo
- [ 0.512692] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
- [ 0.512706] mmc_host mmc2: card is non-removable.
- [ 0.513542] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.513854] No iBFT detected.
- [ 0.513937] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
- [ 0.514058] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
- [ 0.514127] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
- [ 0.514290] hid: raw HID events driver (C) Jiri Kosina
- [ 0.514418] usbcore: registered new interface driver usbhid
- [ 0.514421] usbhid: USB HID core driver
- [ 0.518218] Initializing XFRM netlink socket
- [ 0.518629] NET: Registered PF_INET6 protocol family
- [ 0.528467] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
- [ 0.542786] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
- [ 0.560867] Freeing initrd memory: 8288K
- [ 0.580252] Segment Routing with IPv6
- [ 0.580317] In-situ OAM (IOAM) with IPv6
- [ 0.580395] mip6: Mobile IPv6
- [ 0.580400] NET: Registered PF_PACKET protocol family
- [ 0.580579] Key type dns_resolver registered
- [ 0.581199] registered taskstats version 1
- [ 0.581214] Loading compiled-in X.509 certificates
- [ 0.581803] zswap: loaded using pool lzo/zbud
- [ 0.581949] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
- [ 0.582234] Key type ._fscrypt registered
- [ 0.582237] Key type .fscrypt registered
- [ 0.582239] Key type fscrypt-provisioning registered
- [ 0.582666] Key type encrypted registered
- [ 0.628484] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
- [ 0.629495] dwmmc_rockchip fe2b0000.mmc: All phases bad!
- [ 0.629505] mmc0: tuning execution failed: -5
- [ 0.629515] mmc0: error -5 whilst initialising SD card
- [ 0.645751] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
- [ 0.649081] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
- [ 0.654031] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
- [ 0.654067] rockchip-dw-pcie 3c0000000.pcie: IO 0x033ef00000..0x033effffff -> 0x003ef00000
- [ 0.654082] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033eefffff -> 0x0000000000
- [ 0.654232] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled
- [ 0.654237] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound
- [ 0.713032] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
- [ 0.743707] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- [ 0.752250] usb 2-1: New USB device found, idVendor=04e8, idProduct=61f5, bcdDevice= 1.00
- [ 0.752316] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
- [ 0.752368] usb 2-1: Product: Portable SSD T5
- [ 0.752414] usb 2-1: Manufacturer: Samsung
- [ 0.752459] usb 2-1: SerialNumber: 1234567E3315
- [ 0.752535] mmc2: new high speed SDIO card at address 0001
- [ 0.759329] scsi host0: uas
- [ 0.760410] scsi 0:0:0:0: Direct-Access Samsung Portable SSD T5 0 PQ: 0 ANSI: 6
- [ 0.762612] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.762952] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 0.763115] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.763123] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
- [ 0.763348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.763530] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
- [ 0.763537] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
- [ 0.772782] rockchip-dw-pcie 3c0000000.pcie: Link up
- [ 0.772931] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
- [ 0.772941] pci_bus 0000:00: root bus resource [bus 00-0f]
- [ 0.772950] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x3ef00000-0x3effffff])
- [ 0.772957] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33eefffff] (bus address [0x00000000-0x3eefffff])
- [ 0.772994] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
- [ 0.773019] pci 0000:00:00.0: reg 0x38: [mem 0x300000000-0x30000ffff pref]
- [ 0.773086] pci 0000:00:00.0: supports D1 D2
- [ 0.773092] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.778356] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
- [ 0.778467] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
- [ 0.778565] pci 0000:01:00.0: reg 0x10: [mem 0x300000000-0x300003fff 64bit]
- [ 0.779371] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 lin)
- [ 0.810057] pci 0000:00:00.0: BAR 14: assigned [mem 0x300000000-0x3000fffff]
- [ 0.810090] pci 0000:00:00.0: BAR 6: assigned [mem 0x300100000-0x30010ffff pref]
- [ 0.810117] pci 0000:01:00.0: BAR 0: assigned [mem 0x300000000-0x300003fff 64bit]
- [ 0.810184] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 0.810200] pci 0000:00:00.0: bridge window [mem 0x300000000-0x3000fffff]
- [ 0.810392] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
- [ 0.813113] pci 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
- [ 0.813584] nvme nvme0: pci function 0000:01:00.0
- [ 0.813696] nvme 0000:01:00.0: enabling device (0000 -> 0002)
- [ 0.823249] ALSA device list:
- [ 0.823263] No soundcards found.
- [ 0.823475] dw-apb-uart fe660000.serial: forbid DMA for kernel console
- [ 0.837258] sda: sda1
- [ 0.837889] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.905870] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
- [ 1.092839] usb 4-1: new full-speed USB device number 2 using ohci-platform
- [ 1.202909] dwmmc_rockchip fe2b0000.mmc: Successfully tuned phase to 185
- [ 1.203658] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
- [ 1.205074] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
- [ 1.211211] mmcblk0: p1 p2
- [ 1.369925] usb 4-1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
- [ 1.369961] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.369979] usb 4-1: Product: USB Receiver
- [ 1.369993] usb 4-1: Manufacturer: Logitech
- [ 1.379698] input: Logitech USB Receiver as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.0/0003:046D:C52F.0001/input/input1
- [ 1.380723] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fd840000.usb-1/input0
- [ 1.386623] input: Logitech USB Receiver Consumer Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C52F.0002/input/input2
- [ 1.453982] hid-generic 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-fd840000.usb-1/input1
- [ 3.196385] nvme nvme0: Shutdown timeout set to 8 seconds
- [ 3.213311] nvme nvme0: 4/0/0 default/read/poll queues
- [ 3.223414] nvme0n1: p1
- [ 3.224945] Freeing unused kernel memory: 3200K
- [ 3.262985] Run /init as init process
- [ 3.263000] with arguments:
- [ 3.263011] /init
- [ 3.263019] splash
- [ 3.263027] with environment:
- [ 3.263034] HOME=/
- [ 3.263041] TERM=linux
- [ 3.621178] rk808-rtc rk808-rtc: registered as rtc0
- [ 3.623830] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T09:00:08 UTC (1501923608)
- [ 3.646306] rockchip-vop2 fe040000.vop: Adding to iommu group 0
- [ 3.648621] clk: couldn't set vpll clk rate to 32768 (-22), current rate: 24000000
- [ 3.651857] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops [rockchipdrm])
- [ 3.653529] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
- [ 3.654323] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 3.654820] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
- [ 3.655605] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
- [ 3.955903] Console: switching to colour frame buffer device 240x67
- [ 4.046751] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
- [ 4.603931] logitech-djreceiver 0003:046D:C52F.0001: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fd840000.usb-1/input0
- [ 4.775083] logitech-djreceiver 0003:046D:C52F.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-fd840000.usb-1/input1
- [ 4.845878] logitech-djreceiver 0003:046D:C52F.0002: device of type eQUAD step 4 DJ (0x04) connected on slot 1
- [ 4.849806] input: Logitech Wireless Mouse PID:4031 Mouse as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C52F.0002/0003:046D:4031.0003/input/input5
- [ 4.851184] input: Logitech Wireless Mouse PID:4031 Consumer Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C52F.0002/0003:046D:4031.0003/input6
- [ 4.852139] hid-generic 0003:046D:4031.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4031] on usb-fd840000.usb-1/input1:1
- [ 5.063156] input: Logitech M310/M310t as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C52F.0002/0003:046D:4031.0003/input/input10
- [ 5.064323] logitech-hidpp-device 0003:046D:4031.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-fd840000.usb-1/input1:1
- [ 5.694123] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
- [ 5.891897] systemd[1]: System time before build time, advancing clock.
- [ 5.919831] systemd[1]: systemd 251.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +)
- [ 5.919860] systemd[1]: Detected architecture arm64.
- [ 5.922469] systemd[1]: Hostname set to <frank-pc>.
- [ 6.424155] systemd[1]: Queued start job for default target Graphical Interface.
- [ 6.428031] systemd[1]: Created slice Slice /system/getty.
- [ 6.429808] systemd[1]: Created slice Slice /system/modprobe.
- [ 6.431312] systemd[1]: Created slice Slice /system/serial-getty.
- [ 6.432405] systemd[1]: Created slice User and Session Slice.
- [ 6.432951] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 6.433752] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 6.434146] systemd[1]: Reached target Local Integrity Protected Volumes.
- [ 6.434414] systemd[1]: Reached target Remote Encrypted Volumes.
- [ 6.434582] systemd[1]: Reached target Remote File Systems.
- [ 6.434742] systemd[1]: Reached target Slice Units.
- [ 6.434936] systemd[1]: Reached target Swaps.
- [ 6.435137] systemd[1]: Reached target Local Verity Protected Volumes.
- [ 6.435561] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 6.436457] systemd[1]: Listening on LVM2 poll daemon socket.
- [ 6.440522] systemd[1]: Listening on Process Core Dump Socket.
- [ 6.445348] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
- [ 6.446025] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.446793] systemd[1]: Listening on Journal Socket.
- [ 6.447572] systemd[1]: Listening on Network Service Netlink Socket.
- [ 6.448222] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
- [ 6.449583] systemd[1]: Listening on udev Control Socket.
- [ 6.450285] systemd[1]: Listening on udev Kernel Socket.
- [ 6.450943] systemd[1]: Listening on User Database Manager Socket.
- [ 6.454569] systemd[1]: Mounting Huge Pages File System...
- [ 6.458259] systemd[1]: Mounting POSIX Message Queue File System...
- [ 6.462208] systemd[1]: Mounting Kernel Debug File System...
- [ 6.462974] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
- [ 6.467280] systemd[1]: Mounting Temporary Directory /tmp...
- [ 6.471727] systemd[1]: Starting Create List of Static Device Nodes...
- [ 6.475946] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
- [ 6.480321] systemd[1]: Starting Load Kernel Module configfs...
- [ 6.485110] systemd[1]: Starting Load Kernel Module drm...
- [ 6.489708] systemd[1]: Starting Load Kernel Module fuse...
- [ 6.490473] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
- [ 6.497230] systemd[1]: Starting Journal Service...
- [ 6.504175] systemd[1]: Starting Load Kernel Modules...
- [ 6.508716] systemd[1]: Starting Generate network units from Kernel command line...
- [ 6.514098] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 6.514804] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
- [ 6.519325] systemd[1]: Starting Coldplug All udev Devices...
- [ 6.524426] systemd[1]: Starting Setup Virtual Console...
- [ 6.532459] systemd[1]: Mounted Huge Pages File System.
- [ 6.546270] EXT4-fs (sda1): re-mounted. Quota mode: none.
- [ 6.555319] systemd[1]: Mounted POSIX Message Queue File System.
- [ 6.556585] systemd[1]: Mounted Kernel Debug File System.
- [ 6.558083] systemd[1]: Mounted Temporary Directory /tmp.
- [ 6.560235] systemd[1]: Finished Create List of Static Device Nodes.
- [ 6.569103] systemd[1]: modprobe@configfs.service: Deactivated successfully.
- [ 6.569716] systemd[1]: Finished Load Kernel Module configfs.
- [ 6.571010] systemd[1]: modprobe@drm.service: Deactivated successfully.
- [ 6.571562] systemd[1]: Finished Load Kernel Module drm.
- [ 6.573573] systemd[1]: modprobe@fuse.service: Deactivated successfully.
- [ 6.574286] systemd[1]: Finished Load Kernel Module fuse.
- [ 6.576055] systemd[1]: Finished Load Kernel Modules.
- [ 6.577901] systemd[1]: Finished Generate network units from Kernel command line.
- [ 6.579540] systemd[1]: Finished Remount Root and Kernel File Systems.
- [ 6.585231] systemd[1]: Mounting FUSE Control File System...
- [ 6.589976] systemd[1]: Mounting Kernel Configuration File System...
- [ 6.592096] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
- [ 6.592381] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
- [ 6.596478] systemd[1]: Starting Load/Save Random Seed...
- [ 6.601391] systemd[1]: Starting Apply Kernel Variables...
- [ 6.604018] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
- [ 6.619752] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 6.627878] systemd[1]: Mounted FUSE Control File System.
- [ 6.629828] systemd[1]: Mounted Kernel Configuration File System.
- [ 6.661253] systemd[1]: Finished Apply Kernel Variables.
- [ 6.696812] systemd[1]: Finished Create Static Device Nodes in /dev.
- [ 6.703769] systemd[1]: Starting Rule-based Manager for Device Events and Files...
- [ 6.723892] systemd[1]: Started Journal Service.
- [ 6.752515] systemd-journald[299]: Received client request to flush runtime journal.
- [ 6.761876] systemd-journald[299]: File /var/log/journal/2a704f1c4bed414ca1d094907f5caedd/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 7.537366] panfrost fde60000.gpu: clock rate = 594000000
- [ 7.537390] panfrost fde60000.gpu: bus_clock rate = 500000000
- [ 7.559099] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0
- [ 7.559112] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400
- [ 7.559117] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7
- [ 7.559122] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1
- [ 7.582896] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1
- [ 7.613541] Registered IR keymap rc-cec
- [ 7.620363] rc rc0: dw_hdmi as /devices/platform/fe0a0000.hdmi/rc/rc0
- [ 7.620518] input: dw_hdmi as /devices/platform/fe0a0000.hdmi/rc/rc0/input11
- [ 7.662979] at24 0-0050: supply vcc not found, using dummy regulator
- [ 7.814025] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
- [ 7.814396] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
- [ 7.814403] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
- [ 7.814407] rk_gmac-dwmac fe010000.ethernet: RX delay(0x24).
- [ 7.814415] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
- [ 7.814450] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
- [ 7.819797] rk_gmac-dwmac fe010000.ethernet: init for RGMII
- [ 7.820647] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
- [ 7.820661] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
- [ 7.820666] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
- [ 7.820670] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
- [ 7.820672] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
- [ 7.820675] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
- [ 7.885587] rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio)
- [ 7.885599] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low)
- [ 7.891730] at24 0-0050: 2048 byte bl24c16a EEPROM, writable, 16 bytes/write
- [ 7.934232] rk_gmac-dwmac fe010000.ethernet: TSO supported
- [ 7.934243] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
- [ 7.934252] rk_gmac-dwmac fe010000.ethernet: device MAC address a2:b2:43:49:c9:67
- [ 7.934259] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
- [ 7.934265] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
- [ 7.934269] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
- [ 8.403386] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
- [ 8.404048] usbcore: registered new interface driver brcmfmac
- [ 8.405102] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,quartz64-b.bin failed with error -2
- [ 8.514023] Bluetooth: Core ver 2.22
- [ 8.516108] NET: Registered PF_BLUETOOTH protocol family
- [ 8.516116] Bluetooth: HCI device and connection manager initialized
- [ 8.516131] Bluetooth: HCI socket layer initialized
- [ 8.516137] Bluetooth: L2CAP socket layer initialized
- [ 8.516162] Bluetooth: SCO socket layer initialized
- [ 8.555338] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
- [ 8.560174] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
- [ 8.729114] Bluetooth: HCI UART driver ver 2.3
- [ 8.729128] Bluetooth: HCI UART protocol H4 registered
- [ 8.729131] Bluetooth: HCI UART protocol BCSP registered
- [ 8.739185] Bluetooth: HCI UART protocol LL registered
- [ 8.739197] Bluetooth: HCI UART protocol ATH3K registered
- [ 8.746414] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 8.756357] Bluetooth: HCI UART protocol Intel registered
- [ 8.786964] Bluetooth: HCI UART protocol Broadcom registered
- [ 8.796430] Bluetooth: HCI UART protocol QCA registered
- [ 8.807151] Bluetooth: HCI UART protocol Marvell registered
- [ 8.897392] of_dma_request_slave_channel: dma-names property of node '/serial@fe650000' missing or empty
- [ 8.897418] dw-apb-uart fe650000.serial: failed to request DMA
- [ 9.137053] Bluetooth: hci0: BCM: chip id 107
- [ 9.139261] Bluetooth: hci0: BCM: features 0x2f
- [ 9.162303] Bluetooth: hci0: BCM4345C0
- [ 9.162313] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
- [ 9.162589] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
- [ 9.162592] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.pine64,quartz64-b.hcd'
- [ 9.162594] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
- [ 9.162597] Bluetooth: hci0: BCM: 'brcm/BCM.pine64,quartz64-b.hcd'
- [ 9.162599] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
- [ 9.266025] random: crng init done
- [ 9.448544] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 9.985685] zram: Added device: zram0
- [ 9.997849] zram0: detected capacity change from 0 to 11486640
- [ 10.038698] Adding 5743316k swap on /dev/zram0. Priority:100 extents:1 across:5743316k SSFS
- [ 10.063921] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 10.063935] Bluetooth: BNEP filters: protocol multicast
- [ 10.063948] Bluetooth: BNEP socket layer initialized
- [ 11.560212] bpfilter: Loaded bpfilter_umh pid 441
- [ 11.561212] Started bpfilter
- [ 11.952844] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
- [ 12.073061] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
- [ 12.082833] dwmac4: Master AXI performs any burst length
- [ 12.082858] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found
- [ 12.082885] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
- [ 12.083141] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
- [ 12.083526] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode
- [ 16.317111] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 16.317148] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 22.154430] systemd-journald[299]: File /var/log/journal/2a704f1c4bed414ca1d094907f5caedd/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 74.534000] logitech-hidpp-device 0003:046D:4031.0003: HID++ 2.0 device connected.
- [ 122.646396] usb 4-1: USB disconnect, device number 2
- [ 130.564013] usb 4-1: new low-speed USB device number 3 using ohci-platform
- [ 130.836082] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
- [ 130.836118] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 130.836136] usb 4-1: Product: USB Keyboard
- [ 130.836149] usb 4-1: Manufacturer: Logitech
- [ 130.850959] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.0/0003:046D:C31C.0004/input/input12
- [ 130.916013] hid-generic 0003:046D:C31C.0004: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-fd840000.usb-1/input0
- [ 130.929941] input: Logitech USB Keyboard Consumer Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.0005/input/input13
- [ 130.994834] input: Logitech USB Keyboard System Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.0005/input/input14
- [ 130.995637] hid-generic 0003:046D:C31C.0005: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-fd840000.usb-1/input1
- [ 157.320454] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
- [ 164.387657] usb 4-1: USB disconnect, device number 3
- [ 174.531661] usb 4-1: new low-speed USB device number 4 using ohci-platform
- [ 174.803954] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
- [ 174.803982] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 174.803994] usb 4-1: Product: USB Keyboard
- [ 174.804004] usb 4-1: Manufacturer: Logitech
- [ 174.821745] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.0/0003:046D:C31C.0006/input/input15
- [ 174.893974] hid-generic 0003:046D:C31C.0006: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-fd840000.usb-1/input0
- [ 174.905594] input: Logitech USB Keyboard Consumer Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.0007/input/input16
- [ 174.972573] input: Logitech USB Keyboard System Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.0007/input/input17
- [ 174.973494] hid-generic 0003:046D:C31C.0007: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-fd840000.usb-1/input1
- [ 182.446355] usb 4-1: USB disconnect, device number 4
- [ 183.491196] usb 4-1: new low-speed USB device number 5 using ohci-platform
- [ 183.763797] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
- [ 183.763831] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 183.763849] usb 4-1: Product: USB Keyboard
- [ 183.763862] usb 4-1: Manufacturer: Logitech
- [ 183.781441] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.0/0003:046D:C31C.0008/input/input18
- [ 183.853175] hid-generic 0003:046D:C31C.0008: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-fd840000.usb-1/input0
- [ 183.867152] input: Logitech USB Keyboard Consumer Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.0009/input/input19
- [ 183.931936] input: Logitech USB Keyboard System Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.0009/input/input20
- [ 183.932792] hid-generic 0003:046D:C31C.0009: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-fd840000.usb-1/input1
- [ 196.840893] usb 4-1: USB disconnect, device number 5
- [ 205.530354] usb 4-1: new low-speed USB device number 6 using ohci-platform
- [ 205.802466] usb 4-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
- [ 205.802500] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 205.802518] usb 4-1: Product: USB Keyboard
- [ 205.802531] usb 4-1: Manufacturer: Logitech
- [ 205.821248] input: Logitech USB Keyboard as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.0/0003:046D:C31C.000A/input/input21
- [ 205.892138] hid-generic 0003:046D:C31C.000A: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-fd840000.usb-1/input0
- [ 205.904257] input: Logitech USB Keyboard Consumer Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.000B/input/input22
- [ 205.971179] input: Logitech USB Keyboard System Control as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C31C.000B/input/input23
- [ 205.972017] hid-generic 0003:046D:C31C.000B: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-fd840000.usb-1/input1
- [ 216.972784] usb 4-1: USB disconnect, device number 6
- [ 232.709689] usb 4-1: new full-speed USB device number 7 using ohci-platform
- [ 232.987013] usb 4-1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
- [ 232.987049] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 232.987068] usb 4-1: Product: USB Receiver
- [ 232.987081] usb 4-1: Manufacturer: Logitech
- [ 232.996718] logitech-djreceiver 0003:046D:C52F.000C: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fd840000.usb-1/input0
- [ 233.066034] logitech-djreceiver 0003:046D:C52F.000D: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-fd840000.usb-1/input1
- [ 233.132957] logitech-djreceiver 0003:046D:C52F.000D: device of type eQUAD step 4 DJ (0x04) connected on slot 1
- [ 233.143734] input: Logitech M310/M310t as /devices/platform/fd840000.usb/usb4/4-1/4-1:1.1/0003:046D:C52F.000D/0003:046D:4031.000E/input/input24
- [ 233.144501] logitech-hidpp-device 0003:046D:4031.000E: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-fd840000.usb-1/input1:1
- [ 235.015171] logitech-hidpp-device 0003:046D:4031.000E: HID++ 2.0 device connected.
- [ 243.669592] INFO: task kworker/u9:0:82 blocked for more than 122 seconds.
- [ 243.669625] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 243.669634] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 243.669641] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 243.669663] Workqueue: hci0 hci_power_on [bluetooth]
- [ 243.669863] Call trace:
- [ 243.669869] __switch_to+0xb8/0xf0
- [ 243.669889] __schedule+0x26c/0x680
- [ 243.669902] schedule+0x54/0xd0
- [ 243.669912] schedule_timeout+0xc0/0xf0
- [ 243.669924] __wait_for_common+0xb0/0x1d0
- [ 243.669935] wait_for_completion+0x20/0x30
- [ 243.669945] __flush_work.isra.0+0x13c/0x25c
- [ 243.669959] __cancel_work_timer+0x110/0x190
- [ 243.669971] cancel_work_sync+0x14/0x20
- [ 243.669983] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 243.670170] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 243.670353] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 243.670534] process_one_work+0x1a4/0x300
- [ 243.670547] worker_thread+0x6c/0x40c
- [ 243.670558] kthread+0xe4/0xf0
- [ 243.670570] ret_from_fork+0x10/0x20
- [ 269.428861] usb 4-1: USB disconnect, device number 7
- [ 277.678935] usb 3-1: new high-speed USB device number 7 using ehci-platform
- [ 277.900756] usb 3-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04
- [ 277.900785] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 277.900798] usb 3-1: Product: 4-Port USB 2.0 Hub
- [ 277.900808] usb 3-1: Manufacturer: Generic
- [ 277.902335] hub 3-1:1.0: USB hub found
- [ 277.903014] hub 3-1:1.0: 4 ports detected
- [ 282.709026] usb 3-1.1: new full-speed USB device number 8 using ehci-platform
- [ 282.862697] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
- [ 282.862731] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 282.862750] usb 3-1.1: Product: USB Receiver
- [ 282.862763] usb 3-1.1: Manufacturer: Logitech
- [ 282.868762] logitech-djreceiver 0003:046D:C52F.000F: hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-fd800000.usb-1.1/input0
- [ 282.944608] logitech-djreceiver 0003:046D:C52F.0010: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-fd800000.usb-1.1/input1
- [ 283.010022] logitech-djreceiver 0003:046D:C52F.0010: device of type eQUAD step 4 DJ (0x04) connected on slot 1
- [ 283.018651] input: Logitech M310/M310t as /devices/platform/fd800000.usb/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C52F.0010/0003:046D:4031.0011/input/input25
- [ 283.019576] logitech-hidpp-device 0003:046D:4031.0011: input,hidraw2: USB HID v1.11 Mouse [Logitech M310/M310t] on usb-fd800000.usb-1.1/input1:1
- [ 286.260192] logitech-hidpp-device 0003:046D:4031.0011: HID++ 2.0 device connected.
- [ 308.389125] usb 3-1.3: new low-speed USB device number 9 using ehci-platform
- [ 308.545453] usb 3-1.3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
- [ 308.545491] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 308.545509] usb 3-1.3: Product: USB Keyboard
- [ 308.545522] usb 3-1.3: Manufacturer: Logitech
- [ 308.554650] input: Logitech USB Keyboard as /devices/platform/fd800000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C31C.0012/input/input26
- [ 308.621444] hid-generic 0003:046D:C31C.0012: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-fd800000.usb-1.3/input0
- [ 308.631252] input: Logitech USB Keyboard Consumer Control as /devices/platform/fd800000.usb/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C31C.0013/input/input27
- [ 308.699986] input: Logitech USB Keyboard System Control as /devices/platform/fd800000.usb/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C31C.0013/input/input28
- [ 308.700869] hid-generic 0003:046D:C31C.0013: input,hidraw4: USB HID v1.10 Device [Logitech USB Keyboard] on usb-fd800000.usb-1.3/input1
- [ 366.549060] INFO: task kworker/u9:0:82 blocked for more than 245 seconds.
- [ 366.549101] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 366.549113] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 366.549120] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 366.549151] Workqueue: hci0 hci_power_on [bluetooth]
- [ 366.549426] Call trace:
- [ 366.549434] __switch_to+0xb8/0xf0
- [ 366.549460] __schedule+0x26c/0x680
- [ 366.549476] schedule+0x54/0xd0
- [ 366.549489] schedule_timeout+0xc0/0xf0
- [ 366.549505] __wait_for_common+0xb0/0x1d0
- [ 366.549519] wait_for_completion+0x20/0x30
- [ 366.549533] __flush_work.isra.0+0x13c/0x25c
- [ 366.549552] __cancel_work_timer+0x110/0x190
- [ 366.549567] cancel_work_sync+0x14/0x20
- [ 366.549582] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 366.549834] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 366.550076] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 366.550322] process_one_work+0x1a4/0x300
- [ 366.550340] worker_thread+0x6c/0x40c
- [ 366.550355] kthread+0xe4/0xf0
- [ 366.550370] ret_from_fork+0x10/0x20
- [ 489.428025] INFO: task kworker/u9:0:82 blocked for more than 368 seconds.
- [ 489.428069] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 489.428081] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 489.428090] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 489.428122] Workqueue: hci0 hci_power_on [bluetooth]
- [ 489.428399] Call trace:
- [ 489.428408] __switch_to+0xb8/0xf0
- [ 489.428434] __schedule+0x26c/0x680
- [ 489.428449] schedule+0x54/0xd0
- [ 489.428464] schedule_timeout+0xc0/0xf0
- [ 489.428480] __wait_for_common+0xb0/0x1d0
- [ 489.428496] wait_for_completion+0x20/0x30
- [ 489.428510] __flush_work.isra.0+0x13c/0x25c
- [ 489.428529] __cancel_work_timer+0x110/0x190
- [ 489.428545] cancel_work_sync+0x14/0x20
- [ 489.428560] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 489.428811] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 489.429055] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 489.429298] process_one_work+0x1a4/0x300
- [ 489.429315] worker_thread+0x6c/0x40c
- [ 489.429331] kthread+0xe4/0xf0
- [ 489.429346] ret_from_fork+0x10/0x20
- [ 612.305898] INFO: task kworker/u9:0:82 blocked for more than 491 seconds.
- [ 612.305953] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 612.305969] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 612.305981] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 612.306023] Workqueue: hci0 hci_power_on [bluetooth]
- [ 612.306415] Call trace:
- [ 612.306426] __switch_to+0xb8/0xf0
- [ 612.306464] __schedule+0x26c/0x680
- [ 612.306487] schedule+0x54/0xd0
- [ 612.306507] schedule_timeout+0xc0/0xf0
- [ 612.306530] __wait_for_common+0xb0/0x1d0
- [ 612.306552] wait_for_completion+0x20/0x30
- [ 612.306572] __flush_work.isra.0+0x13c/0x25c
- [ 612.306599] __cancel_work_timer+0x110/0x190
- [ 612.306624] cancel_work_sync+0x14/0x20
- [ 612.306646] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 612.307015] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 612.307372] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 612.307730] process_one_work+0x1a4/0x300
- [ 612.307757] worker_thread+0x6c/0x40c
- [ 612.307778] kthread+0xe4/0xf0
- [ 612.307799] ret_from_fork+0x10/0x20
- [ 735.183934] INFO: task kworker/u9:0:82 blocked for more than 614 seconds.
- [ 735.183990] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 735.184009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 735.184020] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 735.184062] Workqueue: hci0 hci_power_on [bluetooth]
- [ 735.184449] Call trace:
- [ 735.184461] __switch_to+0xb8/0xf0
- [ 735.184496] __schedule+0x26c/0x680
- [ 735.184519] schedule+0x54/0xd0
- [ 735.184539] schedule_timeout+0xc0/0xf0
- [ 735.184562] __wait_for_common+0xb0/0x1d0
- [ 735.184585] wait_for_completion+0x20/0x30
- [ 735.184606] __flush_work.isra.0+0x13c/0x25c
- [ 735.184632] __cancel_work_timer+0x110/0x190
- [ 735.184654] cancel_work_sync+0x14/0x20
- [ 735.184676] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 735.185048] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 735.185406] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 735.185763] process_one_work+0x1a4/0x300
- [ 735.185788] worker_thread+0x6c/0x40c
- [ 735.185810] kthread+0xe4/0xf0
- [ 735.185832] ret_from_fork+0x10/0x20
- [ 858.062279] INFO: task kworker/u9:0:82 blocked for more than 737 seconds.
- [ 858.062333] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 858.062349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 858.062360] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 858.062402] Workqueue: hci0 hci_power_on [bluetooth]
- [ 858.062789] Call trace:
- [ 858.062801] __switch_to+0xb8/0xf0
- [ 858.062837] __schedule+0x26c/0x680
- [ 858.062859] schedule+0x54/0xd0
- [ 858.062879] schedule_timeout+0xc0/0xf0
- [ 858.062903] __wait_for_common+0xb0/0x1d0
- [ 858.062926] wait_for_completion+0x20/0x30
- [ 858.062945] __flush_work.isra.0+0x13c/0x25c
- [ 858.062972] __cancel_work_timer+0x110/0x190
- [ 858.062995] cancel_work_sync+0x14/0x20
- [ 858.063017] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 858.063383] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 858.063741] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 858.064099] process_one_work+0x1a4/0x300
- [ 858.064126] worker_thread+0x6c/0x40c
- [ 858.064148] kthread+0xe4/0xf0
- [ 858.064170] ret_from_fork+0x10/0x20
- [ 980.940698] INFO: task kworker/u9:0:82 blocked for more than 860 seconds.
- [ 980.940745] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 980.940761] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 980.940773] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 980.940816] Workqueue: hci0 hci_power_on [bluetooth]
- [ 980.941209] Call trace:
- [ 980.941220] __switch_to+0xb8/0xf0
- [ 980.941256] __schedule+0x26c/0x680
- [ 980.941279] schedule+0x54/0xd0
- [ 980.941299] schedule_timeout+0xc0/0xf0
- [ 980.941322] __wait_for_common+0xb0/0x1d0
- [ 980.941344] wait_for_completion+0x20/0x30
- [ 980.941363] __flush_work.isra.0+0x13c/0x25c
- [ 980.941389] __cancel_work_timer+0x110/0x190
- [ 980.941412] cancel_work_sync+0x14/0x20
- [ 980.941434] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 980.941805] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 980.942162] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 980.942518] process_one_work+0x1a4/0x300
- [ 980.942545] worker_thread+0x6c/0x40c
- [ 980.942569] kthread+0xe4/0xf0
- [ 980.942590] ret_from_fork+0x10/0x20
- [ 1103.818454] INFO: task kworker/u9:0:82 blocked for more than 983 seconds.
- [ 1103.818475] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 1103.818480] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 1103.818483] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 1103.818496] Workqueue: hci0 hci_power_on [bluetooth]
- [ 1103.818601] Call trace:
- [ 1103.818604] __switch_to+0xb8/0xf0
- [ 1103.818618] __schedule+0x26c/0x680
- [ 1103.818623] schedule+0x54/0xd0
- [ 1103.818628] schedule_timeout+0xc0/0xf0
- [ 1103.818634] __wait_for_common+0xb0/0x1d0
- [ 1103.818639] wait_for_completion+0x20/0x30
- [ 1103.818644] __flush_work.isra.0+0x13c/0x25c
- [ 1103.818652] __cancel_work_timer+0x110/0x190
- [ 1103.818658] cancel_work_sync+0x14/0x20
- [ 1103.818663] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 1103.818748] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 1103.818829] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 1103.818910] process_one_work+0x1a4/0x300
- [ 1103.818918] worker_thread+0x6c/0x40c
- [ 1103.818923] kthread+0xe4/0xf0
- [ 1103.818929] ret_from_fork+0x10/0x20
- [ 1226.695935] INFO: task kworker/u9:0:82 blocked for more than 1105 seconds.
- [ 1226.695969] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 1226.695975] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 1226.695980] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 1226.695996] Workqueue: hci0 hci_power_on [bluetooth]
- [ 1226.696133] Call trace:
- [ 1226.696136] __switch_to+0xb8/0xf0
- [ 1226.696153] __schedule+0x26c/0x680
- [ 1226.696159] schedule+0x54/0xd0
- [ 1226.696165] schedule_timeout+0xc0/0xf0
- [ 1226.696171] __wait_for_common+0xb0/0x1d0
- [ 1226.696176] wait_for_completion+0x20/0x30
- [ 1226.696182] __flush_work.isra.0+0x13c/0x25c
- [ 1226.696192] __cancel_work_timer+0x110/0x190
- [ 1226.696198] cancel_work_sync+0x14/0x20
- [ 1226.696203] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 1226.696291] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 1226.696373] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 1226.696457] process_one_work+0x1a4/0x300
- [ 1226.696466] worker_thread+0x6c/0x40c
- [ 1226.696472] kthread+0xe4/0xf0
- [ 1226.696477] ret_from_fork+0x10/0x20
- [ 1349.573705] INFO: task kworker/u9:0:82 blocked for more than 1228 seconds.
- [ 1349.573726] Not tainted 5.19.0-rc1-0.1-MANJARO-ARM-Q64 #1
- [ 1349.573731] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 1349.573734] task:kworker/u9:0 state:D stack: 0 pid: 82 ppid: 2 flags:0x00000008
- [ 1349.573747] Workqueue: hci0 hci_power_on [bluetooth]
- [ 1349.573857] Call trace:
- [ 1349.573859] __switch_to+0xb8/0xf0
- [ 1349.573871] __schedule+0x26c/0x680
- [ 1349.573877] schedule+0x54/0xd0
- [ 1349.573881] schedule_timeout+0xc0/0xf0
- [ 1349.573887] __wait_for_common+0xb0/0x1d0
- [ 1349.573892] wait_for_completion+0x20/0x30
- [ 1349.573897] __flush_work.isra.0+0x13c/0x25c
- [ 1349.573904] __cancel_work_timer+0x110/0x190
- [ 1349.573910] cancel_work_sync+0x14/0x20
- [ 1349.573915] hci_dev_close_sync+0x24/0x50c [bluetooth]
- [ 1349.574002] hci_dev_do_close+0x2c/0x70 [bluetooth]
- [ 1349.574085] hci_power_on+0x184/0x2a0 [bluetooth]
- [ 1349.574166] process_one_work+0x1a4/0x300
- [ 1349.574172] worker_thread+0x6c/0x40c
- [ 1349.574178] kthread+0xe4/0xf0
- [ 1349.574184] ret_from_fork+0x10/0x20
- [ 2034.937160] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Quota mode: none.
- [root@frank-pc ~]#
- CTRL-A Z for help | 1500000 8N1 | NOR | Minicom 2.7.1 | VT102 | Offline | ttyUSB0
Add Comment
Please, Sign In to add comment