API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 17th, 2017
394
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.61 KB | None | 0 0
raw download clone embed print report
  1. ▒@▒▒▒▒A▒DDR Version V1.05 20160805_dbg
  2. In
  3. 300MHz
  4. DDR3
  5. Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  6. mach:2
  7. OUT
  8. Boot1 Release Time: 2017-04-24, version: 2.36
  9. ChipType = 0xc, 278
  10. No.1 FLASH ID:2c 64 44 4b a9 0
  11. ECC:60
  12. ▒▒▒▒▒n▒▒6▒nٷ▒▒
  13. StorageInit ok = 1185606
  14. SecureMode : SBOOT_MODE_NS
  15. Code check OK! theLoader 0x60000000, 1210039
  16. Code check OK! theLoader 0x68400000, 1233968
  17. Enter Trust OS
  18. INF TEE-CORE:init_primary_helper:319: Initializing (1.0.1-57-gf914fe1 #7 Wed Dec 28 01:08:58 UTC 2016 arm)
  19. INF TEE-CORE:init_primary_helper:320: Release version: 1.7
  20. INF TEE-CORE:init_teecore:79: teecore inits done
  21.  
  22.  
  23. U-Boot 2017.02-RK322X-06-03234-g970f825 (Jul 27 2017 - 14:32:44)
  24.  
  25. CPU: rk322x
  26. cpu version = 3
  27. CPU's clock information:
  28. arm pll = 600000000HZ
  29. periph pll = 600000000HZ
  30. ddr pll = 600000000HZ
  31. codec pll = 500000000HZ
  32. Board: Rockchip platform Board
  33. Uboot as second level loader
  34. DRAM: Found dram banks: 1
  35. Adding bank:0000000060000000(0000000040000000)
  36. Reserve memory for trust os.
  37. dram reserve bank: base = 0x68400000, size = 0x00100000
  38. 128 MiB
  39. GIC CPU mask = 0x00000001
  40. rk dma pl330 version: 1.4
  41. remotectl v0.1
  42. pwm freq=0x11e1a3
  43. pwm_freq_nst▒▒SdmmcInit = 2 20
  44. storage init OK!
  45. Using default environment
  46.  
  47. GetParam
  48. Load FDT from boot image.
  49. No pmic detect.
  50. set pwm voltage ok,pwm_id =1 vol=1100000,pwm_value=66
  51. set pwm voltage ok,pwm_id =2 vol=1200000,pwm_value=33
  52. DRAM: dram freq:600MHz
  53. SecureBootEn = 0, SecureBootLock = 0
  54.  
  55. #Boot ver: 2017-05-12#2.32
  56. empty serial no.
  57. normal boot.
  58. checkKey
  59. vbus = 1
  60. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
  61. no fuel gauge found
  62. no fuel gauge found
  63. can't find power_ctr node for lcdc0
  64. HDMI: no pull up gpio
  65. can't find dts node for deviceinfo
  66. rk_hdmi_register:fail to read deviceinfo
  67. hdmi baseparamer 0x0@0-0
  68. left = 0, right = 0, top = 0, bottom = 0, overscan = 0
  69. panel->left = 100 , panel->right = 100 ,panel->top = 100, panel->bottom = 100, panel->overscan = 100
  70. tve baseparamer 0x0@0-0
  71. no edid message:use default vic config:4
  72. hdmi_dev->video.vic is 4
  73. hdmi_dev_config_video vic 4 color_output 1 color_output_depth 8
  74. pixel clk is 74250000 tmds clk is 74250000
  75. hsync_pol 1 vsync_pol 1
  76. [HDMI] sucess output HDMI.
  77. read logo on state from dts [1]
  78. no fuel gauge found
  79. checkKey
  80. vbus = 1
  81. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
  82. Hit any key to stop autoboot: 0
  83. Secure Boot state: 0
  84. kernel @ 0x62000000 (0x0066bb58)
  85. ramdisk @ 0x65bf0000 (0x000f821c)
  86. bootrk: do_bootm_linux...
  87. Loading Device Tree to 65600000, end 65614990 ... OK
  88. Add bank:0000000060000000, 0000000008400000
  89. Add bank:0000000068500000, 0000000037b00000
  90.  
  91. Starting kernel ...
  92.  
  93. <hit enter to activate fiq debugger>
  94. [ 0.000000] Booting Linux on physical CPU 0xf00
  95. [ 0.000000] Initializing cgroup subsys cpu
  96. [ 0.000000] Initializing cgroup subsys cpuacct
  97. [ 0.000000] Linux version 3.10.0 (penggw@server107) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #101 SMP PREEMPT Tue Jul 25 09:07:06 CST 2017
  98. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  99. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  100. [ 0.000000] Machine: Rockchip RK3229, model: rockchip,rk3229
  101. [ 0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x9dc00000, offset:0x01000000
  102. [ 0.000000] hdmi init vic is 4
  103. [ 0.000000] cvbs init tve.format is -1
  104. [ 0.000000] cvbs init tve.format is -1
  105. [ 0.000000] cvbs init tve.format is -1
  106. [ 0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x9dc00000 for uboot logo
  107. [ 0.000000] rockchip_ion_reserve
  108. [ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
  109. [ 0.000000] cma: CMA: reserved 16 MiB at 7f000000
  110. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  111. [ 0.000000] psci: probing function IDs from device-tree
  112. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1615000 s13440 r8192 d15232 u36864
  113. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260864
  114. [ 0.000000] Kernel command line: vmalloc=496M psci=enable rockchip_jtag console=ttyFIQ0 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00004000@0x00004000(trust),0x00002000@0x00008000(misc),0x00000800@0x0000A000(baseparamer),0x00007800@0x0000A800(resource),0x00006000@0x00012000(kernel),0x00008000@0x00018000(boot),0x00010000@0x00020000(recovery),0x00020000@0x00030000(backup),0x00040000@0x00050000(cache),0x00008000@0x00090000(metadata),0x00002000@0x00098000(kpanic),0x00400000@0x0009A000(system),0x00600000@0x0049A000(userdata)-@0x00A9A000(user) storagemedia=nand uboot_logo=0x02000000@0x9dc00000:0x01000000 loader.timestamp=2017-07-27_14:32:44 hdmi.vic=4 tve.format=-1
  115. [ 0.000000] rockchip jtag enabled
  116. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  117. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  118. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  119. [ 0.000000] allocated 2097152 bytes of page_cgroup
  120. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  121. [ 0.000000] Memory: 132MB 891MB = 1023MB total
  122. [ 0.000000] Memory: 972080k/972080k available, 75472k reserved, 491516K highmem
  123. [ 0.000000] Virtual kernel memory layout:
  124. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  125. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  126. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  127. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  128. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  129. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  130. [ 0.000000] .text : 0xc0008000 - 0xc0b8598c (11767 kB)
  131. [ 0.000000] .init : 0xc0b86000 - 0xc0be4480 ( 378 kB)
  132. [ 0.000000] .data : 0xc0be6000 - 0xc0cbccc0 ( 860 kB)
  133. [ 0.000000] .bss : 0xc0cbccc0 - 0xc0dda2cc (1142 kB)
  134. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  135. [ 0.000000] Preemptible hierarchical RCU implementation.
  136. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  137. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  138. [ 0.000000] rk_clk_tree_init start!
  139. [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
  140. [ 0.000000] rkclk_init_clks: cnt_parent = 13
  141. [ 0.000000] rkclk_init_clks: cnt_rate = 19
  142. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  143. [ 0.000000] Switching to timer-based delay loop
  144. [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  145. [ 0.000000] process version: 0
  146. [ 0.000000] channel:0, lkg:3
  147. [ 0.000000] target-temp:95
  148. [ 0.000000] channel:2, lkg:3
  149. [ 0.000000] target-temp:0
  150. [ 0.000000] channel:2, lkg:3
  151. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  152. [ 2.979163] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  153. [ 2.979189] pid_max: default: 32768 minimum: 301
  154. [ 2.979409] Security Framework initialized
  155. [ 2.979439] SELinux: Initializing.
  156. [ 2.979571] Mount-cache hash table entries: 512
  157. [ 2.980679] Initializing cgroup subsys debug
  158. [ 2.980706] Initializing cgroup subsys memory
  159. [ 2.980757] Initializing cgroup subsys freezer
  160. [ 2.980812] CPU: Testing write buffer coherency: ok
  161. [ 2.981291] /cpus/cpu@0 missing clock-frequency property
  162. [ 2.981319] /cpus/cpu@1 missing clock-frequency property
  163. [ 2.981338] /cpus/cpu@2 missing clock-frequency property
  164. [ 2.981357] /cpus/cpu@3 missing clock-frequency property
  165. [ 2.981453] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  166. [ 2.981502] Setting up static identity map for 0xc0814cd0 - 0xc0814d28
  167. [ 2.983474] last_log: 0x7e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x174e (version 3.1)
  168. [ 3.057185] CPU1: Booted secondary processor
  169. [ 3.057241] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  170. [ 3.076868] CPU2: Booted secondary processor
  171. [ 3.076913] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  172. [ 3.096606] CPU3: Booted secondary processor
  173. [ 3.096647] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  174. [ 3.096816] Brought up 4 CPUs
  175. [ 3.096866] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  176. [ 3.096880] CPU: All CPU(s) started in SVC mode.
  177. [ 3.098226] devtmpfs: initialized
  178. [ 3.105680] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  179. [ 3.107338] pinctrl core: initialized pinctrl subsystem
  180. [ 3.107804] regulator-dummy: no parameters
  181. [ 3.128448] NET: Registered protocol family 16
  182. [ 3.131364] DMA: preallocated 256 KiB pool for atomic coherent allocations
  183. [ 3.132169] ion_snapshot: 0x7ea60000 map to 0xe0907000 and copy to 0xc0db2bfc (version 0.1)
  184. [ 3.132411] Registered FIQ tty driver
  185. [ 3.134509] console [ttyFIQ0] enabled
  186. [ 3.134929] Registered fiq debugger ttyFIQ0
  187. [ 3.137034] syscon 10140000.syscon: regmap [mem 0x10140000-0x10140fff] registered
  188. [ 3.137352] syscon 11000000.syscon: regmap [mem 0x11000000-0x11000fff] registered
  189. [ 3.137697] syscon 110e0000.syscon: regmap [mem 0x110e0000-0x110e0fff] registered
  190. [ 3.137998] syscon 11200000.syscon: regmap [mem 0x11200000-0x112003ff] registered
  191. [ 3.138306] syscon 31020000.syscon: regmap [mem 0x31020000-0x31022fff] registered
  192. [ 3.144073] rk_iommu 20053f00.vop_mmu: (vop) Enter
  193. [ 3.144218] rk_iommu 20053f00.vop_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  194. [ 3.144245] rk_iommu 20053f00.vop_mmu: (vop) Initialized
  195. [ 3.144508] rk_iommu 20020800.vpu_mmu: (vpu) Enter
  196. [ 3.144625] rk_iommu 20020800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  197. [ 3.144652] rk_iommu 20020800.vpu_mmu: (vpu) Initialized
  198. [ 3.144890] rk_iommu 20070800.iep_mmu: (iep) Enter
  199. [ 3.145009] rk_iommu 20070800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  200. [ 3.145036] rk_iommu 20070800.iep_mmu: (iep) Initialized
  201. [ 3.145303] rk_iommu 20030480.vdec_mmu: (vdec) Enter
  202. [ 3.145424] rk_iommu 20030480.vdec_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  203. [ 3.145513] rk_iommu 20030480.vdec_mmu: (vdec) Initialized
  204. [ 3.154893] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  205. [ 3.154924] hw-breakpoint: maximum watchpoint size is 8 bytes.
  206. [ 3.154966] rockchip sip version v1
  207. [ 3.155629] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
  208. [ 3.197604] bio: create slab <bio-0> at 0
  209. [ 3.198556] Rockchip hdmi driver version 2.0
  210. .
  211. [ 3.199068] vccio_1v8: 1800 mV
  212. [ 3.199410] vccio_3v3: 3300 mV
  213. [ 3.201342] SCSI subsystem initialized
  214. [ 3.201707] usbcore: registered new interface driver usbfs
  215. [ 3.201814] usbcore: registered new interface driver hub
  216. [ 3.202001] usbcore: registered new device driver usb
  217. [ 3.204375] media: Linux media interface: v0.10
  218. [ 3.204484] Linux video capture interface: v2.00
  219. [ 3.204707] pps_core: LinuxPPS API ver. 1 registered
  220. [ 3.204731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  221. [ 3.204776] PTP clock support registered
  222. [ 3.204859] i2c-core: driver [bq24296] using legacy suspend method
  223. [ 3.204880] i2c-core: driver [bq24296] using legacy resume method
  224. [ 3.206298] Rockchip ion module is successfully loaded (v1.1)
  225. [ 3.206653] Advanced Linux Sound Architecture Driver Initialized.
  226. [ 3.207887] cfg80211: Calling CRDA to update world regulatory domain
  227. [ 3.210776] i2c-core: driver [rk816] using legacy suspend method
  228. [ 3.210829] i2c-core: driver [rk816] using legacy resume method
  229. [ 3.210910] i2c-core: driver [rk818] using legacy suspend method
  230. [ 3.210931] i2c-core: driver [rk818] using legacy resume method
  231. [ 3.212268] rockchip-i2s 100c0000.i2s0: i2s0 has no mclk
  232. [ 3.214009] Switching to clocksource arch_sys_counter
  233. [ 3.253389] rga: Module initialized.
  234. [ 3.254191] rga2 20060000.rga: rga ion client create success!
  235. [ 3.254504] rga: Driver loaded succesfully
  236. [ 3.254804] fb disp policy is box
  237. [ 3.254840] uboot-logo-on:1
  238. [ 3.254901] rk-fb rockchip-fb: rk fb ion client create success!
  239. [ 3.254927] rk-fb rockchip-fb: rockchip framebuffer driver probe
  240. [ 3.255446] rk-screen rk_screen.15: rockchip screen probe success
  241. [ 3.257506] rk322x-lcdc 20050000.vop: vop_dev->regs=0xe0930000
  242. [ 3.257627] rk322x-lcdc vop0: can't find power_ctr node for lcdc0
  243. [ 3.258118] graphics fb0: rockchip framebuffer registerd:fb0
  244. [ 3.258798] graphics fb1: rockchip framebuffer registerd:fb1
  245. [ 3.259149] graphics fb2: rockchip framebuffer registerd:fb2
  246. [ 3.259188] ------------[ cut here ]------------
  247. [ 3.259224] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c/0xb4()
  248. [ 3.259244] autorequest GPIO-0
  249. [ 3.259261] Modules linked in:
  250. [ 3.259288] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.0 #101
  251. [ 3.259339] [<c0013fe4>] (unwind_backtrace+0x0/0xe0) from [<c0011878>] (show_stack+0x10/0x14)
  252. [ 3.259376] [<c0011878>] (show_stack+0x10/0x14) from [<c003d6ac>] (warn_slowpath_common+0x4c/0x68)
  253. [ 3.259413] [<c003d6ac>] (warn_slowpath_common+0x4c/0x68) from [<c003d748>] (warn_slowpath_fmt+0x2c/0x3c)
  254. [ 3.259450] [<c003d748>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02e5480>] (gpio_ensure_requested+0x4c/0xb4)
  255. [ 3.259484] [<c02e5480>] (gpio_ensure_requested+0x4c/0xb4) from [<c02e5768>] (gpiod_direction_output+0x80/0x2b0)
  256. [ 3.259520] [<c02e5768>] (gpiod_direction_output+0x80/0x2b0) from [<c0588ef0>] (led_resume+0x1c/0x30)
  257. [ 3.259558] [<c0588ef0>] (led_resume+0x1c/0x30) from [<c0322134>] (vop_pre_init+0xc/0x21c)
  258. [ 3.259589] [<c0322134>] (vop_pre_init+0xc/0x21c) from [<c0323f20>] (vop_open+0x2c/0x154)
  259. [ 3.259627] [<c0323f20>] (vop_open+0x2c/0x154) from [<c02fad9c>] (rk_fb_open+0x5c/0x64)
  260. [ 3.259661] [<c02fad9c>] (rk_fb_open+0x5c/0x64) from [<c0300e58>] (rk_fb_register+0x3fc/0xa48)
  261. [ 3.259694] [<c0300e58>] (rk_fb_register+0x3fc/0xa48) from [<c0321d98>] (vop_probe+0x1d8/0x270)
  262. [ 3.259729] [<c0321d98>] (vop_probe+0x1d8/0x270) from [<c03a2868>] (platform_drv_probe+0x14/0x18)
  263. [ 3.259768] [<c03a2868>] (platform_drv_probe+0x14/0x18) from [<c03a1694>] (really_probe+0xa8/0x20c)
  264. [ 3.259806] [<c03a1694>] (really_probe+0xa8/0x20c) from [<c03a18f0>] (driver_probe_device+0x30/0x48)
  265. [ 3.259841] [<c03a18f0>] (driver_probe_device+0x30/0x48) from [<c03a1968>] (__driver_attach+0x60/0x84)
  266. [ 3.259876] [<c03a1968>] (__driver_attach+0x60/0x84) from [<c03a0130>] (bus_for_each_dev+0x50/0x90)
  267. [ 3.259912] [<c03a0130>] (bus_for_each_dev+0x50/0x90) from [<c03a0ee4>] (bus_add_driver+0xac/0x20c)
  268. [ 3.259946] [<c03a0ee4>] (bus_add_driver+0xac/0x20c) from [<c03a1e54>] (driver_register+0x9c/0xe0)
  269. [ 3.259984] [<c03a1e54>] (driver_register+0x9c/0xe0) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
  270. [ 3.260022] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0b86b2c>] (do_initcalls+0x70/0xa0)
  271. [ 3.260056] [<c0b86b2c>] (do_initcalls+0x70/0xa0) from [<c0b86bec>] (kernel_init_freeable+0x90/0x130)
  272. [ 3.260096] [<c0b86bec>] (kernel_init_freeable+0x90/0x130) from [<c07ef2d4>] (kernel_init+0x8/0xe4)
  273. [ 3.260136] [<c07ef2d4>] (kernel_init+0x8/0xe4) from [<c000dba0>] (ret_from_fork+0x14/0x34)
  274. [ 3.260198] ---[ end trace 5aaf2fbb89cb2fa3 ]---
  275. [ 3.261228] rk322x-lcdc vop0: lcdc0: dclk:297000000>>fps:240
  276. [ 3.277561] alloc_buffer:ion_phy_addr=0x10000000
  277. [ 3.284477] fb0:phy:10000000>>vir:e0937000>>len:0xb00000
  278. [ 3.303830] rk_iommu 20053f00.vop_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7e9aa000
  279. [ 3.303912] rk322x-lcdc vop0: lcdc0 probe ok, iommu enabled
  280. [ 3.307180] NET: Registered protocol family 2
  281. [ 3.308427] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  282. [ 3.308567] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  283. [ 3.308667] TCP: Hash tables configured (established 4096 bind 4096)
  284. [ 3.308771] TCP: reno registered
  285. [ 3.308800] UDP hash table entries: 256 (order: 1, 8192 bytes)
  286. [ 3.308841] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  287. [ 3.309193] NET: Registered protocol family 1
  288. [ 3.309786] RPC: Registered named UNIX socket transport module.
  289. [ 3.309816] RPC: Registered udp transport module.
  290. [ 3.309832] RPC: Registered tcp transport module.
  291. [ 3.309849] RPC: Registered tcp NFSv4.1 backchannel transport module.
  292. [ 3.311095] Unpacking initramfs...
  293. [ 3.403458] Freeing initrd memory: 992K (c5bf0000 - c5ce8000)
  294. [ 3.404828] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
  295. [ 3.407467] rknandbase v1.0 2014-03-31
  296. [ 3.407892] rknand_probe clk rate = 150000000
  297. [ 3.408048] rknand_driver:ret = 0
  298. [ 3.410351] audit: initializing netlink socket (disabled)
  299. [ 3.410459] type=2000 audit(0.420:1): initialized
  300. [ 3.411866] bounce pool size: 64 pages
  301. [ 3.421718] NFS: Registering the id_resolver key type
  302. [ 3.421841] Key type id_resolver registered
  303. [ 3.421863] Key type id_legacy registered
  304. [ 3.422621] fuse init (API version 7.22)
  305. [ 3.423481] msgmni has been set to 972
  306. [ 3.424081]
  307. [ 3.424081] TEE Core Framework initialization (ver 1:0.1)
  308. [ 3.424163] TEE armv7 Driver initialization
  309. [ 3.424707] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  310. [ 3.424735] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  311. [ 3.425130] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=58)
  312. [ 3.428291] Block layer SCSI generic (bsg) driver version 0.4noop registered
  313. [ 3.428359] io scheduler deadline registered
  314. [ 3.428548] io scheduler cfq registered (default)
  315. [ 3.430992] HDMI: no pull up gpio
  316. [ 3.431864] rockchip-hdmiv2 200a0000.hdmi: rockchip hdmiv2 probe sucess.
  317. [ 3.432538] iep: failed to find iep power down clock source.
  318. [ 3.433126] iep ion client create success!
  319. [ 3.433162] IEP Power ON
  320. [ 3.433550] rk_iommu 20070800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7e9cf000
  321. [ 3.433572] IEP Power OFF
  322. [ 3.433600] IEP Driver loaded succesfully
  323. [ 3.433766] Module initialized.
  324. [ 3.434390] rk3036-tve 20053e00.tve: rockchip,rk322x-tve tv encoder probe ok
  325. [ 3.437518] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-2364208
  326. [ 3.437573] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  327. [ 3.438142] vdd_arm: 950 <--> 1400 mV at 1100 mV
  328. [ 3.438736] vdd_logic: 1100 <--> 1300 mV at 1200 mV
  329. [ 3.439331] rk_serial.c v1.8 2014-03-04
  330. [ 3.439859] 11020000.serial: ttyS1 at MMIO 0x11020000 (irq = 88) is a rk29_serial.1
  331. [ 3.440316] serial 11020000.serial: membase e2446000
  332. [ 3.440927] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 389; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-v3.10.92-25007-g4139eb4', rk_ko_ver is '5', built at '09:06:38', on 'Jul 25 2017'.
  333. [ 3.441132] mali-utgard 20001000.gpu: mali_platform_device->num_resources = 13
  334. [ 3.441160] mali-utgard 20001000.gpu: mali_platform_device->resource[0].start = 0x20001000
  335. [ 3.441185] mali-utgard 20001000.gpu: mali_platform_device->resource[1].start = 0x20000000
  336. [ 3.441209] mali-utgard 20001000.gpu: mali_platform_device->resource[2].start = 0x20003000
  337. [ 3.441235] mali-utgard 20001000.gpu: mali_platform_device->resource[3].start = 0x20008000
  338. [ 3.441258] mali-utgard 20001000.gpu: mali_platform_device->resource[4].start = 0x20004000
  339. [ 3.441284] mali-utgard 20001000.gpu: mali_platform_device->resource[5].start = 0x2000a000
  340. [ 3.441308] mali-utgard 20001000.gpu: mali_platform_device->resource[6].start = 0x20005000
  341. [ 3.441355] mali-utgard 20001000.gpu: mali_platform_device->resource[7].start = 0x00000026
  342. [ 3.441381] mali-utgard 20001000.gpu: mali_platform_device->resource[8].start = 0x00000025
  343. [ 3.441406] mali-utgard 20001000.gpu: mali_platform_device->resource[9].start = 0x00000024
  344. [ 3.441430] mali-utgard 20001000.gpu: mali_platform_device->resource[10].start = 0x00000025
  345. [ 3.441457] mali-utgard 20001000.gpu: mali_platform_device->resource[11].start = 0x00000024
  346. [ 3.441480] mali-utgard 20001000.gpu: mali_platform_device->resource[12].start = 0x00000025
  347. [ 3.441690] mali-utgard 20001000.gpu: freq: 200000000, min_threshold: 0, max_threshold: 70
  348. [ 3.441722] mali-utgard 20001000.gpu: freq: 300000000, min_threshold: 61, max_threshold: 85
  349. [ 3.441749] mali-utgard 20001000.gpu: freq: 500000000, min_threshold: 73, max_threshold: 100
  350. [ 3.441813] mali-utgard 20001000.gpu: initial freq = 200000000
  351. [ 3.444516] Mali: Mali device driver loaded
  352. [ 3.450107] loop: module loaded
  353. [ 3.450953] zram: Created 1 device(s) ...
  354. [ 3.451058] i2c-core: driver [mpu6050B1] using legacy suspend method
  355. [ 3.451080] i2c-core: driver [mpu6050B1] using legacy resume method
  356. [ 3.451099] mpu_init: Probe name mpu6050B1
  357. [ 3.451384] ak8963_mod_init: Probe name ak8963_mod
  358. [ 3.452877] SCSI Media Changer driver v0.25
  359. [ 3.453504] tun: Universal TUN/TAP device driver, 1.6
  360. [ 3.453527] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  361. [ 3.453821] vmac_init.
  362. [ 3.454684] stmmac_probe_config_dt: Can not read property: pmu_regulator.
  363. [ 3.454713] stmmac_probe_config_dt: clock input/output? (output).
  364. [ 3.454734] stmmac_probe_config_dt: TX delay(0x26).
  365. [ 3.454753] stmmac_probe_config_dt: RX delay(0x11).
  366. [ 3.454772] stmmac_probe_config_dt: internal PHY/external PHY? (internal).
  367. [ 3.454944] stmmc_pltfr_init:
  368. [ 3.454964] stmmc_pltfr_init: ERROR: Get power-gpio failed.
  369. [ 3.454982] stmmc_pltfr_init: ERROR: Get reset-gpio failed.
  370. [ 3.455029] stmmc_pltfr_init: init for RMII
  371. [ 3.455321] stmmac - user ID: 0x10, Synopsys ID: 0x35
  372. [ 3.455342] Normal descriptors
  373. [ 3.455356] Ring mode enabled
  374. [ 3.455372] DMA HW capability register supported
  375. [ 3.455390] RX Checksum Offload Engine supported (type 2)
  376. [ 3.455406] TX Checksum insertion supported
  377. [ 3.455421] Wake-Up On Lan supported
  378. [ 3.455497] Enable RX Mitigation via HW Watchdog Timer
  379. [ 3.456283] PPP generic driver version 2.4.2
  380. [ 3.456648] PPP BSD Compression module registered
  381. [ 3.456670] PPP Deflate Compression module registered
  382. [ 3.456707] PPP MPPE Compression module registered
  383. [ 3.456727] NET: Registered protocol family 24
  384. [ 3.456782] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  385. [ 3.456804] CSLIP: code copyright 1989 Regents of the University of California.
  386. [ 3.456826] Rockchip WiFi SYS interface (V1.00) ...
  387. [ 3.456996] usbcore: registered new interface driver catc
  388. [ 3.457080] usbcore: registered new interface driver kaweth
  389. [ 3.457100] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  390. [ 3.457175] usbcore: registered new interface driver pegasus
  391. [ 3.457251] usbcore: registered new interface driver rtl8150
  392. [ 3.457346] usbcore: registered new interface driver r8152
  393. [ 3.457366] hso: drivers/net/usb/hso.c: Option Wireless
  394. [ 3.457499] usbcore: registered new interface driver hso
  395. [ 3.457591] usbcore: registered new interface driver asix
  396. [ 3.457672] usbcore: registered new interface driver ax88179_178a
  397. [ 3.457745] usbcore: registered new interface driver cdc_ether
  398. [ 3.457822] usbcore: registered new interface driver cdc_eem
  399. [ 3.457912] usbcore: registered new interface driver dm9601
  400. [ 3.457989] usbcore: registered new interface driver dm9620
  401. [ 3.458083] usbcore: registered new interface driver smsc75xx
  402. [ 3.458174] usbcore: registered new interface driver smsc95xx
  403. [ 3.458251] usbcore: registered new interface driver gl620a
  404. [ 3.458323] usbcore: registered new interface driver net1080
  405. [ 3.458409] usbcore: registered new interface driver plusb
  406. [ 3.458487] usbcore: registered new interface driver rndis_host
  407. [ 3.458560] usbcore: registered new interface driver cdc_subset
  408. [ 3.458633] usbcore: registered new interface driver zaurus
  409. [ 3.458710] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  410. [ 3.458837] usbcore: registered new interface driver int51x1
  411. [ 3.458918] usbcore: registered new interface driver kalmia
  412. [ 3.458992] usbcore: registered new interface driver ipheth
  413. [ 3.459089] usbcore: registered new interface driver sierra_net
  414. [ 3.459178] usbcore: registered new interface driver cx82310_eth
  415. [ 3.459273] usbcore: registered new interface driver cdc_ncm
  416. [ 3.459353] usbcore: registered new interface driver qmi_wwan
  417. [ 3.459429] usbcore: registered new interface driver cdc_mbim
  418. [ 3.459450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  419. [ 3.459470] ehci-platform: EHCI generic platform driver
  420. [ 3.459951] ehci-platform 30080000.ehci0: EHCI Host Controller
  421. [ 3.460009] ehci-platform 30080000.ehci0: new USB bus registered, assigned bus number 1
  422. [ 3.460648] ehci-platform 30080000.ehci0: irq 48, io mem 0x30080000
  423. [ 3.464891] rockchip-hdmiv2 200a0000.hdmi: warning: no CEA video mode parsed from EDID !!!!
  424. [ 3.464960] hdmi output corlor mode is 1
  425. [ 3.464986] hdmi connect to lcdc0
  426. [ 3.465008] switch:en=1,lcdc_id=0,screen type=6,cur type=1
  427. [ 3.465080] rk322x-lcdc vop0: lcdc0: dclk:74250000>>fps:60
  428. [ 3.465139] pixel clk is 74250000 tmds clk is 74250000
  429. [ 3.465182] rockchip-hdmiv2 200a0000.hdmi: [hdmi_dev_config_video] sucess output DVI.
  430. [ 3.479858] ehci-platform 30080000.ehci0: USB 2.0 started, EHCI 1.00
  431. [ 3.480002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  432. [ 3.480031] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  433. [ 3.480056] usb usb1: Product: EHCI Host Controller
  434. [ 3.480079] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
  435. [ 3.480101] usb usb1: SerialNumber: 30080000.ehci0
  436. [ 3.481079] hub 1-0:1.0: USB hub found
  437. [ 3.481123] hub 1-0:1.0: 1 port detected
  438. [ 3.481709] ehci-platform 300c0000.ehci1: EHCI Host Controller
  439. [ 3.481762] ehci-platform 300c0000.ehci1: new USB bus registered, assigned bus number 2
  440. [ 3.482359] ehci-platform 300c0000.ehci1: irq 51, io mem 0x300c0000
  441. [ 3.499539] ehci-platform 300c0000.ehci1: USB 2.0 started, EHCI 1.00
  442. [ 3.499691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  443. [ 3.499720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  444. [ 3.499744] usb usb2: Product: EHCI Host Controller
  445. [ 3.499767] usb usb2: Manufacturer: Linux 3.10.0 ehci_hcd
  446. [ 3.499791] usb usb2: SerialNumber: 300c0000.ehci1
  447. [ 3.500698] hub 2-0:1.0: USB hub found
  448. [ 3.500762] hub 2-0:1.0: 1 port detected
  449. [ 3.501358] ehci-platform 30100000.ehci2: EHCI Host Controller
  450. [ 3.501415] ehci-platform 30100000.ehci2: new USB bus registered, assigned bus number 3
  451. [ 3.501960] ehci-platform 30100000.ehci2: irq 98, io mem 0x30100000
  452. [ 3.519208] ehci-platform 30100000.ehci2: USB 2.0 started, EHCI 1.00
  453. [ 3.519353] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  454. [ 3.519383] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  455. [ 3.519407] usb usb3: Product: EHCI Host Controller
  456. [ 3.519428] usb usb3: Manufacturer: Linux 3.10.0 ehci_hcd
  457. [ 3.519451] usb usb3: SerialNumber: 30100000.ehci2
  458. [ 3.520358] hub 3-0:1.0: USB hub found
  459. [ 3.520420] hub 3-0:1.0: 1 port detected
  460. [ 3.521199] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  461. [ 3.521465] ohci-platform: OHCI generic platform driver
  462. [ 3.521682] ohci-platform 300a0000.ohci0: Generic Platform OHCI controller
  463. [ 3.521733] ohci-platform 300a0000.ohci0: new USB bus registered, assigned bus number 4
  464. [ 3.521811] ohci-platform 300a0000.ohci0: irq 49, io mem 0x300a0000
  465. [ 3.582283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  466. [ 3.582332] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  467. [ 3.582359] usb usb4: Product: Generic Platform OHCI controller
  468. [ 3.582382] usb usb4: Manufacturer: Linux 3.10.0 ohci_hcd
  469. [ 3.582405] usb usb4: SerialNumber: 300a0000.ohci0
  470. [ 3.583280] hub 4-0:1.0: USB hub found
  471. [ 3.583325] hub 4-0:1.0: 1 port detected
  472. [ 3.583763] ohci-platform 300e0000.ohci1: Generic Platform OHCI controller
  473. [ 3.583816] ohci-platform 300e0000.ohci1: new USB bus registered, assigned bus number 5
  474. [ 3.583891] ohci-platform 300e0000.ohci1: irq 52, io mem 0x300e0000
  475. [ 3.641307] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  476. [ 3.641353] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  477. [ 3.641380] usb usb5: Product: Generic Platform OHCI controller
  478. [ 3.641404] usb usb5: Manufacturer: Linux 3.10.0 ohci_hcd
  479. [ 3.641427] usb usb5: SerialNumber: 300e0000.ohci1
  480. [ 3.642223] hub 5-0:1.0: USB hub found
  481. [ 3.642267] hub 5-0:1.0: 1 port detected
  482. [ 3.642688] ohci-platform 30120000.ohci2: Generic Platform OHCI controller
  483. [ 3.642739] ohci-platform 30120000.ohci2: new USB bus registered, assigned bus number 6
  484. [ 3.642814] ohci-platform 30120000.ohci2: irq 99, io mem 0x30120000
  485. [ 3.700359] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  486. [ 3.700404] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  487. [ 3.700431] usb usb6: Product: Generic Platform OHCI controller
  488. [ 3.700455] usb usb6: Manufacturer: Linux 3.10.0 ohci_hcd
  489. [ 3.700477] usb usb6: SerialNumber: 30120000.ohci2
  490. [ 3.701251] hub 6-0:1.0: USB hub found
  491. [ 3.701300] hub 6-0:1.0: 1 port detected
  492. [ 3.701890] usbcore: registered new interface driver cdc_acm
  493. [ 3.701913] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  494. [ 3.702052] usbcore: registered new interface driver usblp
  495. [ 3.702149] usbcore: registered new interface driver cdc_wdm
  496. [ 3.702345] usbcore: registered new interface driver usb-storage
  497. [ 3.702431] usbcore: registered new interface driver ums-alauda
  498. [ 3.702511] usbcore: registered new interface driver ums-cypress
  499. [ 3.702597] usbcore: registered new interface driver ums-datafab
  500. [ 3.702675] usbcore: registered new interface driver ums_eneub6250
  501. [ 3.702752] usbcore: registered new interface driver ums-freecom
  502. [ 3.702843] usbcore: registered new interface driver ums-isd200
  503. [ 3.702924] usbcore: registered new interface driver ums-jumpshot
  504. [ 3.703002] usbcore: registered new interface driver ums-karma
  505. [ 3.703079] usbcore: registered new interface driver ums-onetouch
  506. [ 3.703157] usbcore: registered new interface driver ums-sddr09
  507. [ 3.703238] usbcore: registered new interface driver ums-sddr55
  508. [ 3.703317] usbcore: registered new interface driver ums-usbat
  509. [ 3.703500] usbcore: registered new interface driver usbserial
  510. [ 3.703592] usbcore: registered new interface driver usbserial_generic
  511. [ 3.703656] usbserial: USB Serial support registered for generic
  512. [ 3.703757] usbcore: registered new interface driver option
  513. [ 3.703822] usbserial: USB Serial support registered for GSM modem (1-port)
  514. [ 3.704216] usbcore: registered new interface driver trancevibrator
  515. [ 3.704236] usb20_otg: version 3.10a 21-DEC-2012
  516. [ 3.705121] e2680040
  517. [ 3.705146] Core Release: 3.10a
  518. [ 3.705167] Setting default values for core params
  519. [ 3.705431] Using Buffer DMA mode
  520. [ 3.705452] Periodic Transfer Interrupt Enhancement - disabled
  521. [ 3.705471] Multiprocessor Interrupt Enhancement - disabled
  522. [ 3.705490] OTG VER PARAM: 0, OTG VER FLAG: 0
  523. [ 3.705508] ^^^^^^^^^^^^^^^^^Device Mode
  524. [ 3.705530] Dedicated Tx FIFOs mode
  525. [ 3.705591] pcd_init otg_dev = dde07980
  526. [ 3.705904] usb20_otg 30040000.otg: DWC OTG Controller
  527. [ 3.705963] usb20_otg 30040000.otg: new USB bus registered, assigned bus number 7
  528. [ 3.706019] usb20_otg 30040000.otg: irq 55, io mem 0x00000000
  529. [ 3.706233] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
  530. [ 3.706266] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  531. [ 3.706290] usb usb7: Product: DWC OTG Controller
  532. [ 3.706313] usb usb7: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  533. [ 3.706337] usb usb7: SerialNumber: 30040000.otg
  534. [ 3.707203] hub 7-0:1.0: USB hub found
  535. [ 3.707246] hub 7-0:1.0: 1 port detected
  536. [ 3.716238] usb20_host: version 3.10a 21-DEC-2012
  537. [ 3.718174] usbcore: registered new interface driver xpad
  538. [ 3.718287] usbcore: registered new interface driver usb_acecad
  539. [ 3.718386] usbcore: registered new interface driver aiptek
  540. [ 3.718483] usbcore: registered new interface driver gtco
  541. [ 3.718591] usbcore: registered new interface driver hanwang
  542. [ 3.718684] usbcore: registered new interface driver kbtab
  543. [ 3.718813] usbcore: registered new interface driver wacom
  544. [ 3.718956] i2c-core: driver [gslX680] using legacy suspend method
  545. [ 3.718978] i2c-core: driver [gslX680] using legacy resume method
  546. [ 3.719810] sensor_register_slave:mma8452,id=17
  547. [ 3.719837] sensor_register_slave:mma7660,id=18
  548. [ 3.719858] sensor_register_slave:gs_mc3230,id=23
  549. [ 3.719875] gsensor_init
  550. [ 3.719890] sensor_register_slave:mpu6880_acc,id=24
  551. [ 3.719909] sensor_register_slave:mpu6500_acc,id=25
  552. [ 3.719929] sensor_register_slave:akm8963,id=28
  553. [ 3.719945] sensor_register_slave:cm3217,id=48
  554. [ 3.719963] sensor_register_slave:cm3218,id=49
  555. [ 3.720398] .. rk pwm remotectl v1.1 init
  556. [ 3.720862] input: 110b0030.pwm as /devices/110b0030.pwm/input/input0
  557. [ 3.721646] i2c /dev entries driver
  558. [ 3.722552] IR NEC protocol handler initialized
  559. [ 3.722576] IR RC5(x) protocol handler initialized
  560. [ 3.722593] IR RC6 protocol handler initialized
  561. [ 3.722609] IR JVC protocol handler initialized
  562. [ 3.722624] IR Sony protocol handler initialized
  563. [ 3.722640] IR RC5 (streamzap) protocol handler initialized
  564. [ 3.722658] IR SANYO protocol handler initialized
  565. [ 3.722675] IR MCE Keyboard/mouse protocol handler initialized
  566. [ 3.722997] usbcore: registered new interface driver uvcvideo
  567. [ 3.723016] USB Video Class driver (1.1.1)
  568. [ 3.723038] CamSys driver version: v0.33.0, CamSys head file version: v0.11.0
  569. [ 3.723060] E:camsys_soc_init(36): camsys isn't support soc: 0x32283002!
  570. [ 3.723654] not find test_power_init dev node
  571. [ 3.723728] i2c-core: driver [bq27320] using legacy suspend method
  572. [ 3.723748] i2c-core: driver [bq27320] using legacy resume method
  573. [ 3.725078] rockchip_temp_probe,line=379
  574. [ 3.725679] tsadc 11150000.tsadc: Missing tsadc_low_temp in the DT.
  575. [ 3.775024] tsadc 11150000.tsadc: initialized
  576. [ 3.775945] device-mapper: uevent: version 1.0.3
  577. [ 3.776480] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  578. [ 3.777013] cpufreq version 1.0, suspend freq 1008 MHz
  579. [ 3.777562] cpuidle: using governor ladder
  580. [ 3.777607] cpuidle: using governor menu
  581. [ 3.777683] Synopsys Designware Multimedia Card Interface Driver
  582. [ 3.777702] MHSC version = Ver 2.00 2015-06-10
  583. [ 3.778209] dwmmc_rockchip 30020000.rksdmmc: Version ID is 270a
  584. [ 3.778322] dwmmc_rockchip 30020000.rksdmmc: failed to get hpclk_mmc
  585. [ 3.806089] Using Buffer DMA mode
  586. [ 3.806130] Periodic Transfer Interrupt Enhancement - disabled
  587. [ 3.806148] Multiprocessor Interrupt Enhancement - disabled
  588. [ 3.806167] OTG VER PARAM: 0, OTG VER FLAG: 0
  589. [ 3.806185] ^^^^^^^^^^^^^^^^^^Host Mode
  590. [ 3.806411] dwmmc_rockchip 30020000.rksdmmc: Using internal DMA controller.
  591. [ 3.806774] dwmmc_rockchip 30020000.rksdmmc: dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
  592. [ 3.807050] dwmmc_rockchip 30020000.rksdmmc: dw_mci_set_ios: no card. [mmc0]
  593. [ 3.824302] dwmmc_rockchip 30020000.rksdmmc: dw_mci_set_ios: no card. [mmc0]
  594. [ 3.844024] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out ▒88▒▒▒88▒8@▒▒▒@▒▒▒▒▒▒▒▒▒
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!