Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- boot0 version : 4.0.0
- rtc[1] value = 0x00010000
- rtc[2] value = 0x00020000
- rtc[3] value = 0x00030000
- DRAM DRIVE INFO: V1.1
- DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM normal_mode value: 00000001
- DRAM CLK =732 MHZ
- rsb_send_initseq: rsb clk 400Khz -> 3Mhz
- PMU: AXP81X
- ddr voltage = 1200 mv
- ID CHECK VERSION: V0.2
- using ic A83T
- using axp AXP813
- DRAM zq value: 00003bfb
- dram size =2048
- card boot number = 2
- card no is 2
- sdcard 2 line count 8
- [mmc]: mmc driver ver 2015-04-13 16:05:39
- [mmc]: ***Try SD card 2***
- [mmc]: mmc 2 cmd 8 err 00000100
- [mmc]: mmc 2 cmd 8 err 00000100
- [mmc]: mmc 2 send if cond failed
- [mmc]: mmc 2 cmd 55 err 00000100
- [mmc]: mmc 2 cmd 55 err 00000100
- [mmc]: mmc 2 send app cmd failed
- [mmc]: ***Try MMC card 2***
- [mmc]: mmc re-update_phase
- [mmc]: mmc re-update_phase
- [mmc]: 8bit ddr!!!
- [mmc]: mmc re-update_phase
- [mmc]: MMC ver 4.5
- [mmc]: SD/MMC Card: 8bit, capacity: 7456MB
- [mmc]: vendor: Man 00150100 Snr 03dc0db0
- [mmc]: product: M8G1G
- [mmc]: revision: 4.3
- [mmc]: ***SD/MMC 2 init OK!!!***
- sdcard 2 init ok
- The size of uboot is 000d4000.
- sum=d800d490
- src_sum=d800d490
- set_mmc_para,sdly 50M 0
- set_mmc_para,sdly 25M 0
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- [ 0.204]
- U-Boot 2011.09-rc1-dirty (Nov 05 2015 - 23:11:51) Allwinner Technology
- [ 0.212]version: 2.1.0
- normal mode
- [ 0.288]pmbus: normal or secure os
- ready
- [ 0.292]PMU: AXP81X
- [ 0.295]PMU: AXP81X found
- bat_vol=176, ratio=100
- [ 0.300]PMU: dcdc2 900
- [ 0.303]PMU: pll1 1008 Mhz
- AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
- set power on vol to default
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 900, onoff=1
- dcdc3_vol = 900, onoff=1
- dcdc4_vol = 900, onoff=1
- dcdc6_vol = 900, onoff=1
- aldo1_vol = 1800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- eldo2_vol = 1800, onoff=0
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 3300, onoff=0
- dldo3_vol = 2500, onoff=1
- dldo4_vol = 2800, onoff=0
- fldo2_vol = 900, onoff=1
- find power_sply to end
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b04, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b08, value=0xd, pmu_vol=3300
- supply=dldo3
- axp=axp81x, supply=dldo3, vol=1800
- reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b10, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b14, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b18, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
- supply=aldo3
- axp=axp81x, supply=aldo3, vol=3000
- reg addr=0x1f02f00, value=0xa, pmu_vol=3000
- config gpio bias voltage finish
- vbus exist
- no battery, limit to dc
- ac100 reg 0x00 = 0x101
- ac100 reg 0xd0 = 0x0
- ac100 reg 0xd1 = 0x0
- fel key old mode
- run key detect
- no key found
- no key input
- dram_para_set start
- dram_para_set end
- [ 1.025]DRAM: 2 GiB
- relocation Offset is: 75af9000
- gic: normal or no secure os mode
- script config pll_de to 504 Mhz
- script config pll_video1 to 297 Mhz
- Not Found clk pll_video in script
- enable power vcc-hdmi-18, ret=0
- DRV_DISP_Init end
- [ 1.259]boot_disp.output_disp=1
- [ 1.263]boot_disp.output_type=3
- [ 1.266]boot_disp.output_mode=5
- [ 1.269]fetch script data boot_disp.auto_hpd fail
- disp1 device type(4) enable
- attched ok, mgr1<-->device1, type=4, mode=5----
- ready to set mode
- workmode = 0
- MMC: 2
- [ 1.304][mmc]: mmc driver ver 2015-04-13 14:50:00
- [ 1.309][mmc]: get sdc_phy_wipe fail.
- [ 1.313][mmc]: get sdc0 sdc_erase fail.
- [ 1.317][mmc]: get sdc_2xmode ok, val = 1
- [ 1.321][mmc]: get sdc_ddrmode ok, val = 1
- [ 1.325][mmc]: get sdc_f_max fail,use default 50000000Hz
- [ 1.331][mmc]: get card_line ok, card_line = 8
- [ 1.335][mmc]: get sdc_ex_dly_used fail,use default
- [ 1.340][mmc]: SUNXI SD/MMC: 2
- [ 1.354][mmc]: *Try SD card 2*
- [ 1.357][mmc]: mmc 2 cmd 8 err 100
- [ 1.363][mmc]: mmc send if cond failed
- [ 1.367][mmc]: mmc 2 cmd 55 err 100
- [ 1.372][mmc]: send app cmd failed
- [ 1.375][mmc]: *Try MMC card 2*
- [ 1.415][mmc]: mmc re-update_phase
- [ 1.420][mmc]: mmc re-update_phase
- [ 1.425][mmc]: mmc re-update_phase
- [ 1.430][mmc]: ddr8
- [ 1.432][mmc]: mmc re-update_phase
- [ 1.445][mmc]: CID 0x1501004d 0x38473147 0x4303dc0d 0xb061506f
- [ 1.450][mmc]: MMC ver 4.5
- [ 1.453][mmc]: mmc clk 50000000
- [ 1.456][mmc]: SD/MMC Card: 8bit, capacity: 7456MB
- [ 1.461][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
- [ 1.467][mmc]: ***SD/MMC 2 init OK!!!***
- [ 1.472][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
- [ 1.478][mmc]: secure_feature 0x55
- [ 1.481][mmc]: secure_removal_type 0x0
- [ 1.485]sunxi flash init ok
- the secure storage map is empty
- no item name key_burned_flag in the map
- sunxi secure storage has no flag
- [ 1.499]usb burn from boot
- delay time 0
- [ 1.570]usb prepare ok
- [ 2.372]timer occur
- [ 2.374]overtime
- [ 2.409]do_burn_from_boot usb : no usb exist
- limit to dc
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:11-
- -name- -start- -size-
- bootloader : 1000000 1000000
- env : 2000000 1000000
- boot : 3000000 1000000
- system : 4000000 60000000
- misc : 64000000 1000000
- recovery : 65000000 2000000
- cache : 67000000 30000000
- metadata : 97000000 1000000
- private : 98000000 1000000
- alog : 99000000 5000000
- UDISK : 9e000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- key 0
- recovery key high 10, low 8
- cant find fstbt value
- misc partition found
- to be run cmd=run setargs_mmc boot_normal
- ** Unable to use sunxi_flash 8:0 for fatload **
- load file(sn.txt) error
- serial is: 00000000000000000000
- mount part name bootloader
- cant open script.bin, maybe it is not exist
- WORK_MODE_BOOT
- board_status_probe
- [ 2.512]power trigger
- bat_exist=0
- [ 2.516]no battery exist
- sunxi_bmp_logo_display
- [ 2.554][mmc]: blkcnt should not be 0
- [ 2.572]fetch script data boot_disp.output_disp fail
- [ 2.577]screen_id =1, screen_width =1280, screen_height =720
- [ 2.583]frame buffer address 46400000
- [ 2.587]Hit any key to stop autoboot: 0
- read boot or recovery all
- [ 2.762]sunxi flash read :offset 3000000, 14556211 bytes OK
- [ 2.774]ready to boot
- [ 2.776][mmc]: mmc exit start
- [ 2.788][mmc]: mmc 2 cmd 8 err 100
- [ 2.793][mmc]: mmc send if cond failed
- [ 2.797][mmc]: mmc 2 cmd 55 err 100
- [ 2.802][mmc]: send app cmd failed
- [ 2.814][mmc]: get sdc_phy_wipe fail.
- [ 2.818][mmc]: get sdc0 sdc_erase fail.
- [ 2.822][mmc]: get sdc_2xmode ok, val = 1
- [ 2.826][mmc]: get sdc_ddrmode ok, val = 1
- [ 2.830][mmc]: get sdc_f_max fail,use default 50000000Hz
- [ 2.835][mmc]: get card_line ok, card_line = 8
- [ 2.840][mmc]: get sdc_ex_dly_used fail,use default
- [ 2.845][mmc]: mmc 2 exit ok
- [ 2.848]
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 2048MB
- ion_carveout reserve: 96m 128m
- ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
- ion_cma reserve: 120m 176m 512m
- ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
- ------sun8i_smp_init_ops----37-----
- [ 0.250091] CPU4: failed to boot: -22
- [ 0.290060] CPU5: failed to boot: -22
- [ 0.330060] CPU6: failed to boot: -22
- [ 0.370079] CPU7: failed to boot: -22
- [ 0.815218] config_pmux_para: script_parser_fetch err.
- [ 0.815719] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.816039] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.816150] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 1.021728] sunxikbd_script_init: key para not found, used default para.
- [ 1.055279] sunxi_oops: heming add OOPS_INFO_ADDR = -20
- [ 1.063515] request gpio failed!
- [ 1.377009] init: property_opt_for_mem: start!
- [ 1.382317] init: property_opt_for_mem: ro.sf.lcd_density not set, disable adaptive memory function!
- [ 1.557442] init: /dev/hw_random not found
- [ 1.743480] init: /dev/hw_random not found
- [ 2.152911] EXT4-fs (mmcblk0p1): error loading journal
- [ 2.290190] fs_mgr: begin to format ext4 buffer : /dev/block/mmcblk0p1
- [ 5.925005] fs_mgr: finish format to ext4: /dev/block/mmcblk0p1
- shell@android:/ $ [ 7.464559] failed to get normal led pin assign
- [ 7.469662] failed to get standby led pin assign
- [ 7.913412] [VFE_ERR]vfe sensor register check error at input_num = 0
- [ 8.364166] init: Warning! Service bootclone needs a SELinux domain defined; please fix!
- [ 8.374584] init: Warning! Service precopy needs a SELinux domain defined; please fix!
- [ 8.409094] init: property_opt_for_mem: start!
- [ 8.414928] init: property_opt_for_mem: width_dp = 800; height_dp = 480; screenSize = 2; bSupport64Bit = 0, g_total_mem = 2018
- [ 8.542839] init: Warning! Service pvrsrvctl needs a SELinux domain defined; please fix!
- [ 8.559764] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
- [ 8.573066] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
- [ 8.610942] init: cannot find '/data/rftesttool/wifiservice', disabling 'wifiservice'
- [ 8.619809] init: cannot find '/data/rftesttool/btservice', disabling 'btservice'
- [ 8.631655] android_usb: already disabled
- [ 11.497555] sd 0:0:0:0: [sda] Asking for cache data failed
- [ 11.503764] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 11.517072] sd 0:0:0:0: [sda] Asking for cache data failed
- [ 11.523265] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 17.546694] init: Warning! Service sensors needs a SELinux domain defined; please fix!
- [ 25.303167] init: Warning! Service preinstall needs a SELinux domain defined; please fix!
- [ 47.583290] [BT_LPM] bluesleep_get_uart_port: bluesleep_get_uart_port get uart_port from blusleep_uart_dev: uart, port irq: 33
- [ 47.601344] [BT_LPM] bluesleep_hostwake_task: hostwake line change
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement