SHARE
TWEET

Not Working - Working -Not working

a guest Aug 24th, 2016 174 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. xbian@xbian ~ $ sudo dmesg
  2. [sudo] password for xbian:
  3. [    0.000000] Booting Linux on physical CPU 0xf00
  4. [    0.000000] Initializing cgroup subsys cpuset
  5. [    0.000000] Initializing cgroup subsys cpu
  6. [    0.000000] Initializing cgroup subsys cpuacct
  7. [    0.000000] Linux version 4.4.19+ (jenkins@vps01) (gcc version 4.7.3 (Ubuntu/                                                                                        Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Tue Aug 23 18:59:25 CEST 2016
  8. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  9. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio                                                                                        n cache
  10. [    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
  11. [    0.000000] cma: Reserved 8 MiB at 0x2e400000
  12. [    0.000000] Memory policy: Data cache writealloc
  13. [    0.000000] On node 0 totalpages: 192512
  14. [    0.000000] free_area_init_node: node 0, pgdat 809d0000, node_mem_map add6400                                                                                        0
  15. [    0.000000]   Normal zone: 1692 pages used for memmap
  16. [    0.000000]   Normal zone: 0 pages reserved
  17. [    0.000000]   Normal zone: 192512 pages, LIFO batch:31
  18. [    0.000000] [bcm2709_smp_init_cpus] enter (9540->f3003010)
  19. [    0.000000] [bcm2709_smp_init_cpus] ncores=4
  20. [    0.000000] PERCPU: Embedded 13 pages/cpu @aefaa000 s23232 r8192 d21824 u5324                                                                                        8
  21. [    0.000000] pcpu-alloc: s23232 r8192 d21824 u53248 alloc=13*4096
  22. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  23. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                                                                        es: 190820
  24. [    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1366                                                                                         bcm2708_fb.fbheight=768 bcm2709.boardrev=0xa01041 bcm2709.serial=0xf8249933 smsc                                                                                        95xx.macaddr=B8:27:EB:24:99:33 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bc                                                                                        m2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000                                                                                         vc_mem.mem_size=0x3f000000  telnet zswap.enabled=1 zswap.compressor=lz4 console=                                                                                        tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=lz4 rootfst                                                                                        ype=btrfs rootwait logo.nologo quiet noswap loglevel=0 partswap startevent=mount                                                                                        all selinux=0 splash nohdparm --startup-event mountall
  25. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  26. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  27. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  28. [    0.000000] Memory: 743096K/770048K available (7210K kernel code, 472K rwdata                                                                                        , 1896K rodata, 476K init, 785K bss, 18760K reserved, 8192K cma-reserved)
  29. [    0.000000] Virtual kernel memory layout:
  30.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  31.     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  32.     vmalloc : 0xaf800000 - 0xff800000   (1280 MB)
  33.     lowmem  : 0x80000000 - 0xaf000000   ( 752 MB)
  34.     modules : 0x7f000000 - 0x80000000   (  16 MB)
  35.       .text : 0x80008000 - 0x808ecb68   (9107 kB)
  36.       .init : 0x808ed000 - 0x80964000   ( 476 kB)
  37.       .data : 0x80964000 - 0x809da04c   ( 473 kB)
  38.        .bss : 0x809dd000 - 0x80aa146c   ( 786 kB)
  39. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  40. [    0.000000] Preemptible hierarchical RCU implementation.
  41. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  42. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  43. [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  44. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                                                                         0x46d987e47, max_idle_ns: 440795202767 ns
  45. [    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 43980                                                                                        46511078ns
  46. [    0.000025] Switching to timer-based delay loop, resolution 52ns
  47. [    0.000274] Console: colour dummy device 80x30
  48. [    0.000445] console [tty1] enabled
  49. [    0.000473] Calibrating delay loop (skipped), value calculated using timer fr                                                                                        equency.. 38.40 BogoMIPS (lpj=38400)
  50. [    0.000493] pid_max: default: 32768 minimum: 301
  51. [    0.000791] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  52. [    0.000808] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  53. [    0.001974] Disabling cpuset control group subsystem
  54. [    0.002015] Initializing cgroup subsys io
  55. [    0.002044] Initializing cgroup subsys memory
  56. [    0.002093] Initializing cgroup subsys devices
  57. [    0.002119] Initializing cgroup subsys freezer
  58. [    0.002140] Initializing cgroup subsys net_cls
  59. [    0.002211] CPU: Testing write buffer coherency: ok
  60. [    0.002285] ftrace: allocating 23116 entries in 68 pages
  61. [    0.043254] CPU0: update cpu_capacity 1024
  62. [    0.043284] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  63. [    0.043298] [bcm2709_smp_prepare_cpus] enter
  64. [    0.043411] Setting up static identity map for 0x8240 - 0x8274
  65. [    0.058828] [bcm2709_boot_secondary] cpu:1 started (0) 18
  66. [    0.059257] [bcm2709_secondary_init] enter cpu:1
  67. [    0.059301] CPU1: update cpu_capacity 1024
  68. [    0.059308] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  69. [    0.064873] [bcm2709_boot_secondary] cpu:2 started (0) 18
  70. [    0.065198] [bcm2709_secondary_init] enter cpu:2
  71. [    0.065221] CPU2: update cpu_capacity 1024
  72. [    0.065228] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  73. [    0.070930] [bcm2709_boot_secondary] cpu:3 started (0) 18
  74. [    0.071150] [bcm2709_secondary_init] enter cpu:3
  75. [    0.071172] CPU3: update cpu_capacity 1024
  76. [    0.071178] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  77. [    0.071245] Brought up 4 CPUs
  78. [    0.071268] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  79. [    0.071277] CPU: All CPU(s) started in HYP mode.
  80. [    0.071285] CPU: Virtualization extensions available.
  81. [    0.072047] devtmpfs: initialized
  82. [    0.084663] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7                                                                                         rev 5
  83. [    0.084909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                        x_idle_ns: 3822520892550000 ns
  84. [    0.085703] xor: measuring software checksum speed
  85. [    0.105182]    arm4regs  :  1244.000 MB/sec
  86. [    0.125273]    8regs     :   790.000 MB/sec
  87. [    0.145364]    32regs    :   644.000 MB/sec
  88. [    0.165455]    neon      :  1104.000 MB/sec
  89. [    0.165466] xor: using function: arm4regs (1244.000 MB/sec)
  90. [    0.165503] pinctrl core: initialized pinctrl subsystem
  91. [    0.166540] NET: Registered protocol family 16
  92. [    0.171719] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  93. [    0.179595] cpuidle: using governor ladder
  94. [    0.185629] cpuidle: using governor menu
  95. [    0.191152] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint                                                                                         registers.
  96. [    0.191166] hw-breakpoint: maximum watchpoint size is 8 bytes.
  97. [    0.191328] Serial: AMBA PL011 UART driver
  98. [    0.191602] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud =                                                                                         0) is a PL011 rev2
  99. [    0.192109] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  100. [    0.270382] raid6: int32x1  gen()   132 MB/s
  101. [    0.304496] raid6: int32x1  xor()   108 MB/s
  102. [    0.338672] raid6: int32x2  gen()   164 MB/s
  103. [    0.373104] raid6: int32x2  xor()   116 MB/s
  104. [    0.407220] raid6: int32x4  gen()   177 MB/s
  105. [    0.441402] raid6: int32x4  xor()   122 MB/s
  106. [    0.475727] raid6: int32x8  gen()   185 MB/s
  107. [    0.509677] raid6: int32x8  xor()   109 MB/s
  108. [    0.543885] raid6: neonx1   gen()   427 MB/s
  109. [    0.578151] raid6: neonx1   xor()   321 MB/s
  110. [    0.612360] raid6: neonx2   gen()   580 MB/s
  111. [    0.646498] raid6: neonx2   xor()   416 MB/s
  112. [    0.680708] raid6: neonx4   gen()   703 MB/s
  113. [    0.714878] raid6: neonx4   xor()   470 MB/s
  114. [    0.749178] raid6: neonx8   gen()   638 MB/s
  115. [    0.783337] raid6: neonx8   xor()   437 MB/s
  116. [    0.783347] raid6: using algorithm neonx4 gen() 703 MB/s
  117. [    0.783356] raid6: .... xor() 470 MB/s, rmw enabled
  118. [    0.783365] raid6: using intx1 recovery algorithm
  119. [    0.784771] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dma                                                                                        chans=0x1
  120. [    0.785442] SCSI subsystem initialized
  121. [    0.785637] usbcore: registered new interface driver usbfs
  122. [    0.785728] usbcore: registered new interface driver hub
  123. [    0.785864] usbcore: registered new device driver usb
  124. [    0.787386] raspberrypi-firmware soc:firmware: Attached to firmware from 2016                                                                                        -08-10 20:40
  125. [    0.814903] clocksource: Switched to clocksource arch_sys_counter
  126. [    0.861326] FS-Cache: Loaded
  127. [    0.861618] CacheFiles: Loaded
  128. [    0.872408] NET: Registered protocol family 2
  129. [    0.873508] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  130. [    0.873595] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  131. [    0.873725] TCP: Hash tables configured (established 8192 bind 8192)
  132. [    0.873835] UDP hash table entries: 512 (order: 2, 16384 bytes)
  133. [    0.873890] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  134. [    0.874176] NET: Registered protocol family 1
  135. [    0.874592] RPC: Registered named UNIX socket transport module.
  136. [    0.874607] RPC: Registered udp transport module.
  137. [    0.874616] RPC: Registered tcp transport module.
  138. [    0.874625] RPC: Registered tcp NFSv4.1 backchannel transport module.
  139. [    0.876048] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counter                                                                                        s available
  140. [    0.877133] futex hash table entries: 1024 (order: 4, 65536 bytes)
  141. [    0.890173] zbud: loaded
  142. [    0.890581] VFS: Disk quotas dquot_6.6.0
  143. [    0.890881] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  144. [    0.893158] FS-Cache: Netfs 'nfs' registered for caching
  145. [    0.894235] NFS: Registering the id_resolver key type
  146. [    0.894296] Key type id_resolver registered
  147. [    0.894305] Key type id_legacy registered
  148. [    0.897783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                        52)
  149. [    0.897943] io scheduler noop registered
  150. [    0.897964] io scheduler deadline registered
  151. [    0.898020] io scheduler cfq registered (default)
  152. [    0.900599] BCM2708FB: allocated DMA memory ee800000
  153. [    0.900636] BCM2708FB: allocated DMA channel 0 @ f3007000
  154. [    0.923906] Console: switching to colour frame buffer device 170x48
  155. [    1.790783] bcm2835-rng 3f104000.rng: hwrng registered
  156. [    1.790927] vc-cma: Videocore CMA driver
  157. [    1.790938] vc-cma: vc_cma_base      = 0x00000000
  158. [    1.790948] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
  159. [    1.790957] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
  160. [    1.791172] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000                                                                                        000(1008 MiB)
  161. [    1.809123] brd: module loaded
  162. [    1.810047] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0
  163. [    1.811778] Loading iSCSI transport class v2.0-870.
  164. [    1.812587] usbcore: registered new interface driver smsc95xx
  165. [    1.812648] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  166. [    2.013017] Core Release: 2.80a
  167. [    2.013037] Setting default values for core params
  168. [    2.013079] Finished setting default values for core params
  169. [    2.213455] Using Buffer DMA mode
  170. [    2.213468] Periodic Transfer Interrupt Enhancement - disabled
  171. [    2.213476] Multiprocessor Interrupt Enhancement - disabled
  172. [    2.213487] OTG VER PARAM: 0, OTG VER FLAG: 0
  173. [    2.213500] Dedicated Tx FIFOs mode
  174. [    2.213798] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae8                                                                                        14000 dma = 0xee814000 len=9024
  175. [    2.213831] FIQ FSM acceleration enabled for :
  176. Non-periodic Split Transactions
  177. Periodic Split Transactions
  178. High-Speed Isochronous Endpoints
  179. Interrupt/Control Split Transaction hack enabled
  180. [    2.213853] dwc_otg: Microframe scheduler enabled
  181. [    2.213945] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80510d10
  182. [    2.213959] WARN::hcd_init_fiq:414: FIQ ASM at 0x80511050 length 36
  183. [    2.213974] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaf87e000
  184. [    2.214056] dwc_otg 3f980000.usb: DWC OTG Controller
  185. [    2.214098] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number                                                                                         1
  186. [    2.214138] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  187. [    2.214187] Init: Port Power? op_state=1
  188. [    2.214195] Init: Power Port (0)
  189. [    2.214465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  190. [    2.214479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                                                                                        1
  191. [    2.214492] usb usb1: Product: DWC OTG Controller
  192. [    2.214504] usb usb1: Manufacturer: Linux 4.4.19+ dwc_otg_hcd
  193. [    2.214515] usb usb1: SerialNumber: 3f980000.usb
  194. [    2.215374] hub 1-0:1.0: USB hub found
  195. [    2.215427] hub 1-0:1.0: 1 port detected
  196. [    2.215866] dwc_otg: FIQ enabled
  197. [    2.215877] dwc_otg: NAK holdoff enabled
  198. [    2.215886] dwc_otg: FIQ split-transaction FSM enabled
  199. [    2.215923] Module dwc_common_port init
  200. [    2.216250] usbcore: registered new interface driver usb-storage
  201. [    2.216494] mousedev: PS/2 mouse device common for all mice
  202. [    2.217335] bcm2835-cpufreq: min=600000 max=900000
  203. [    2.217720] sdhci: Secure Digital Host Controller Interface driver
  204. [    2.217730] sdhci: Copyright(c) Pierre Ossman
  205. [    2.218045] sdhost: log_buf @ ae813000 (ee813000)
  206. [    2.280940] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  207. [    2.281186] sdhci-pltfm: SDHCI platform and OF driver helper
  208. [    2.281689] ledtrig-cpu: registered to indicate activity on CPUs
  209. [    2.281890] hidraw: raw HID events driver (C) Jiri Kosina
  210. [    2.282084] usbcore: registered new interface driver usbhid
  211. [    2.282093] usbhid: USB HID core driver
  212. [    2.282631] Initializing XFRM netlink socket
  213. [    2.282673] NET: Registered protocol family 17
  214. [    2.282832] Key type dns_resolver registered
  215. [    2.283633] Registering SWP/SWPB emulation handler
  216. [    2.284483] registered taskstats version 1
  217. [    2.284670] zswap: loaded using pool lz4/zbud
  218. [    2.303053] Btrfs loaded
  219. [    2.303238] vc-sm: Videocore shared memory driver
  220. [    2.303254] [vc_sm_connected_init]: start
  221. [    2.303908] [vc_sm_connected_init]: end - returning 0
  222. [    2.304241] of_cfs_init
  223. [    2.304345] of_cfs_init: OK
  224. [    2.305587] Waiting for root device /dev/mmcblk0p2...
  225. [    2.336023] mmc0: host does not support reading read-only switch, assuming wr                                                                                        ite-enable
  226. [    2.338005] mmc0: new high speed SDHC card at address 59b4
  227. [    2.338792] mmcblk0: mmc0:59b4 SD16G 14.6 GiB
  228. [    2.341128]  mmcblk0: p1 p2 p3
  229. [    2.408198] BTRFS: device label xbian devid 1 transid 8512 /dev/root
  230. [    2.410151] BTRFS info (device mmcblk0p2): enabling auto defrag
  231. [    2.410178] BTRFS info (device mmcblk0p2): disk space caching is enabled
  232. [    2.410190] BTRFS: has skinny extents
  233. [    2.415052] Indeed it is in host mode hprt0 = 00021501
  234. [    2.532818] BTRFS: detected SSD devices, enabling SSD mode
  235. [    2.550997] VFS: Mounted root (btrfs filesystem) readonly on device 0:16.
  236. [    2.552666] devtmpfs: mounted
  237. [    2.553380] Freeing unused kernel memory: 476K (808ed000 - 80964000)
  238. [    2.578997] usb 1-1: new high-speed USB device number 2 using dwc_otg
  239. [    2.579185] Indeed it is in host mode hprt0 = 00001101
  240. [    2.755290] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  241. [    2.755315] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  242. [    2.756125] hub 1-1:1.0: USB hub found
  243. [    2.756250] hub 1-1:1.0: 5 ports detected
  244. [    3.033000] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  245. [    3.088808] random: init: uninitialized urandom read (12 bytes read, 58 bits                                                                                         of entropy available)
  246. [    3.121481] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  247. [    3.121514] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber                                                                                        =0
  248. [    3.124811] smsc95xx v1.0.4
  249. [    3.179128] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-                                                                                        1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:24:99:33
  250. [    3.256961] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
  251. [    3.293575] init: progress-report (mountall) main process (112) terminated wi                                                                                        th status 1
  252. [    3.294327] init: progress-report (startingmountall) main process (115) termi                                                                                        nated with status 1
  253. [    3.375335] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0719
  254. [    3.375398] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber                                                                                        =3
  255. [    3.375423] usb 1-1.2: Product: Xbox 360 Wireless Receiver for Windows
  256. [    3.375441] usb 1-1.2: Manufacturer: ¬©Microsoft
  257. [    3.375458] usb 1-1.2: SerialNumber: FEF7E920
  258. [    3.456981] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
  259. [    3.553035] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c534
  260. [    3.553070] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber                                                                                        =0
  261. [    3.553089] usb 1-1.4: Product: USB Receiver
  262. [    3.553106] usb 1-1.4: Manufacturer: Logitech
  263. [    3.562083] input: Logitech USB Receiver as /devices/platform/soc/3f980000.us                                                                                        b/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C534.0001/input/input0
  264. [    3.601758] BTRFS info (device mmcblk0p2): disk space caching is enabled
  265. [    3.614263] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Key                                                                                        board [Logitech USB Receiver] on usb-3f980000.usb-1.4/input0
  266. [    3.624776] input: Logitech USB Receiver as /devices/platform/soc/3f980000.us                                                                                        b/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0002/input/input1
  267. [    3.676145] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v                                                                                        1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.4/input1
  268. [    4.295615] init: xbian-failaccess main process (120) killed by TERM signal
  269. [    5.403553] random: dbus-daemon: uninitialized urandom read (12 bytes read, 8                                                                                        6 bits of entropy available)
  270. [    5.498306] init: failsafe main process (281) killed by TERM signal
  271. [    5.592160] random: mountall: uninitialized urandom read (12 bytes read, 88 b                                                                                        its of entropy available)
  272. [    5.701749] random: dbus-daemon: uninitialized urandom read (12 bytes read, 8                                                                                        9 bits of entropy available)
  273. [    5.838045] random: automount: uninitialized urandom read (4 bytes read, 91 b                                                                                        its of entropy available)
  274. [    5.948152] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  275. [    6.578576] random: net: uninitialized urandom read (32 bytes read, 103 bits                                                                                         of entropy available)
  276. [    6.597055] random: net: uninitialized urandom read (32 bytes read, 103 bits                                                                                         of entropy available)
  277. [    6.597142] random: net: uninitialized urandom read (8 bytes read, 103 bits o                                                                                        f entropy available)
  278. [    6.886686] systemd-udevd[840]: starting version 215
  279. [    6.958516] random: systemd-udevd: uninitialized urandom read (16 bytes read,                                                                                         106 bits of entropy available)
  280. [    6.967449] random: mktemp: uninitialized urandom read (6 bytes read, 107 bit                                                                                        s of entropy available)
  281. [    7.140699] random: nonblocking pool is initialized
  282. [    7.473123] lirc_dev: IR Remote Control driver registered, major 244
  283. [    7.509835] lirc_rpi: module is from the staging directory, the quality is un                                                                                        known, you have been warned.
  284. [    7.517369] lirc_rpi: to_irq 184
  285. [    7.594117] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E                                                                                        1
  286. [    7.649316] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  287. [    7.649774] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f2                                                                                        00000
  288. [    7.963291] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f9800                                                                                        00.usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
  289. [    7.963847] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f9800                                                                                        00.usb/usb1/1-1/1-1.2/1-1.2:1.2/input/input3
  290. [    7.964307] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f9800                                                                                        00.usb/usb1/1-1/1-1.2/1-1.2:1.4/input/input4
  291. [    7.964743] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f9800                                                                                        00.usb/usb1/1-1/1-1.2/1-1.2:1.6/input/input5
  292. [    8.035179] usbcore: registered new interface driver xpad
  293. [    8.408524] lirc_rpi: auto-detected active high receiver on GPIO pin 18
  294. [    8.409279] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor                                                                                         = 0
  295. [    8.409300] lirc_rpi: driver registered!
  296. [    8.850802] input: lircd as /devices/virtual/input/input6
  297. [    9.917269] lirc_rpi: Interrupt 184 obtained
  298. [    9.917302] lirc_rpi: in init_timing_params, freq=38000 pulse=13157, space=13                                                                                        158
  299. [   15.825686] systemd-logind[1649]: New seat seat0.
  300. [   22.075560] input: Xbox 360 Wireless Receiver as /devices/virtual/input/input                                                                                        7
  301. [   24.188638] init: wait-for-state (xbmcxbmc-loaded) main process (1379) killed                                                                                         by TERM signal
  302. [   31.598767] init: xbmc-failed-start main process (286) killed by TERM signal
  303. [   31.627817] init: wait-for-state (zram-swapxbmc-done) main process (979) kill                                                                                        ed by TERM signal
  304. [   32.289801] zram: Added device: zram0
  305. [   32.333481] zram: Added device: zram1
  306. [   32.366262] zram: Added device: zram2
  307. [   32.370162] zram: Added device: zram3
  308. [   32.464543] zram0: detected capacity change from 0 to 134217728
  309. [   33.617726] Adding 131068k swap on /dev/zram0.  Priority:20 extents:1 across:                                                                                        131068k SSFS
  310. [   34.671471] Adding 250876k swap on /dev/mmcblk0p3.  Priority:0 extents:1 acro                                                                                        ss:250876k SSFS
  311. [  896.674420] systemd-logind[1649]: Failed to start user service: Unknown unit:                                                                                         user@1000.service
  312. [  896.710939] systemd-logind[1649]: New session c1 of user xbian.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top