Texas Instruments X-Loader 1.4.4ss (Jul 28 2010 - 16:59:13)
Beagle Rev C4
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2010.03 (Aug 06 2010 - 11:28:56)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max clock-720Mhz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial

Probing for expansion boards, if none are connected you'll see a harmless I2C error.

timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Beagle Rev C4
Die ID #249000040000000004037f660901b002
Hit any key to stop autoboot:  0
mmc1 is available
The user button is currently PRESSED.
reading user.scr

** Unable to read "user.scr" from mmc 1:1 **
reading uImage

3194688 bytes read
reading ramdisk.gz

** Unable to read "ramdisk.gz" from mmc 1:1 **
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Angstrom/2.6.32/beagleboard
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3194624 Bytes =  3 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................................................
[    0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Thu Sep 16 13:13:36 CEST 2010
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: OMAP3 Beagle Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720m )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 12582912 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS2,115200n8 mpurate=720 buddy=unknown camera=lbcm3m1 vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblkt
[    0.000000] Beagle expansionboard: unknown
[    0.000000] Beagle cameraboard: lbcm3m1
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 128MB 128MB = 256MB total
[    0.000000] Memory: 240384KB available (5896K code, 671K data, 204K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 466.36 BogoMIPS (lpj=1822720)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] tmpfs: No value for mount option 'mode'
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[    0.000000] Found NAND on CS0
[    0.000000] Registering NAND on CS0
[    0.000000] Unable to get DVI reset GPIO
[    0.000000] Target VDD1 OPP = 6, VDD2 OPP = 3
[   16.314910] OMAP DMA hardware revision 4.0
[   16.323730] bio: create slab <bio-0> at 0
[   16.325317] SCSI subsystem initialized
[   16.327087] usbcore: registered new interface driver usbfs
[   16.327270] usbcore: registered new interface driver hub
[   16.327514] usbcore: registered new device driver usb
[   16.335784] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[   16.338867] twl4030: PIH (irq 7) chaining IRQs 368..375
[   16.338897] twl4030: power (irq 373) chaining IRQs 376..383
[   16.339294] twl4030: gpio (irq 368) chaining IRQs 384..401
[   16.340972] regulator: VUSB1V5: 1500 mV normal standby
[   16.341278] regulator: VUSB1V8: 1800 mV normal standby
[   16.341552] regulator: VUSB3V1: 3100 mV normal standby
[   16.345764] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[   16.346282] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[   16.346618] regulator: VDAC: 1800 mV normal standby
[   16.346923] regulator: VPLL2: 1800 mV normal standby
[   16.347290] regulator: VSIM: 1800 <--> 3000 mV normal standby
[   16.347717] regulator: VAUX3: 1800 mV normal standby
[   16.348114] regulator: VAUX4: 1800 mV normal standby
[   16.348327] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
[   16.357696] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
[   16.359222] Switching to clocksource 32k_counter
[   16.371673] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[   16.371978] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   16.372009] musb_hdrc musb_hdrc: MUSB HDRC host driver
[   16.372161] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[   16.372314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   16.372344] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.372375] usb usb1: Product: MUSB HDRC host driver
[   16.372375] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[   16.372406] usb usb1: SerialNumber: musb_hdrc
[   16.373199] hub 1-0:1.0: USB hub found
[   16.373260] hub 1-0:1.0: 1 port detected
[   16.374633] NET: Registered protocol family 2
[   16.374908] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   16.375671] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   16.375946] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[   16.376068] TCP: Hash tables configured (established 8192 bind 8192)
[   16.376098] TCP reno registered
[   16.376129] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   16.376159] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   16.376464] NET: Registered protocol family 1
[   16.377014] RPC: Registered udp transport module.
[   16.377014] RPC: Registered tcp transport module.
[   16.377044] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.378173] omap-iommu omap-iommu.0: isp registered
[   16.380310] VFS: Disk quotas dquot_6.5.2
[   16.380432] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   16.381774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   16.382934] JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.
[   16.383972] msgmni has been set to 470
[   16.389312] alg: No test for stdrng (krng)
[   16.389648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   16.389678] io scheduler noop registered
[   16.389709] io scheduler deadline registered
[   16.389892] io scheduler cfq registered (default)
[   16.453277] OMAP DSS rev 2.0
[   16.453338] OMAP DISPC rev 3.0
[   16.453430] OMAP VENC rev 2
[   16.453735] OMAP DSI rev 1.0
[   16.794097] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   16.814331] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[   16.833679] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[   16.852966] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[   17.414611] console [ttyS2] enabled
[   17.427032] brd: module loaded
[   17.434417] loop: module loaded
[   17.439178] omap2-nand driver initializing
[   17.443572] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
[   17.452850] cmdlinepart partition parsing not available
[   17.458190] Creating 5 MTD partitions on "omap2-nand":
[   17.463409] 0x000000000000-0x000000080000 : "X-Loader"
[   17.470062] 0x000000080000-0x000000260000 : "U-Boot"
[   17.476776] 0x000000260000-0x000000280000 : "U-Boot Env"
[   17.483062] 0x000000280000-0x000000680000 : "Kernel"
[   17.490570] 0x000000680000-0x000010000000 : "File System"
[   17.596466] usbcore: registered new interface driver catc
[   17.601959] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   17.608032] usbcore: registered new interface driver kaweth
[   17.613677] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[   17.621368] usbcore: registered new interface driver pegasus
[   17.627105] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   17.634155] usbcore: registered new interface driver rtl8150
[   17.639984] usbcore: registered new interface driver asix
[   17.645568] usbcore: registered new interface driver cdc_ether
[   17.651580] usbcore: registered new interface driver dm9601
[   17.657348] usbcore: registered new interface driver smsc95xx
[   17.663238] usbcore: registered new interface driver gl620a
[   17.669006] usbcore: registered new interface driver net1080
[   17.674835] usbcore: registered new interface driver plusb
[   17.680511] usbcore: registered new interface driver rndis_host
[   17.686553] usbcore: registered new interface driver cdc_subset
[   17.692657] usbcore: registered new interface driver zaurus
[   17.698425] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   17.706695] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   17.713623] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[   17.719726] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[   17.727416] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[   17.742187] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[   17.748138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   17.755035] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   17.762359] usb usb2: Product: OMAP-EHCI Host Controller
[   17.767761] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[   17.773223] usb usb2: SerialNumber: ehci-omap.0
[   17.778686] hub 2-0:1.0: USB hub found
[   17.782562] hub 2-0:1.0: 3 ports detected
[   17.812652] Initializing USB Mass Storage driver...
[   17.817779] usbcore: registered new interface driver usb-storage
[   17.823852] USB Mass Storage support registered.
[   17.828979] mice: PS/2 mouse device common for all mice
[   17.834686] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   17.842773] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[   17.853607] i2c /dev entries driver
[   17.857940] Linux video capture interface: v2.00
[   17.862976] omap-iommu omap-iommu.0: isp: version 1.1
[   17.869750] vpfe_init
[   17.872711] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[   17.984771] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[   17.991882] Registered led device: beagleboard::usr0
[   17.997070] Registered led device: beagleboard::usr1
[   18.003234] Registered led device: beagleboard::pmu_stat
[   18.011199] usbcore: registered new interface driver usbhid
[   18.016876] usbhid: USB HID core driver
[   18.020965] Advanced Linux Sound Architecture Driver Version 1.0.21.
[   18.028015] usbcore: registered new interface driver snd-usb-audio
[   18.085876] No device for DAI omap-mcbsp-dai-0
[   18.090393] No device for DAI omap-mcbsp-dai-1
[   18.094909] No device for DAI omap-mcbsp-dai-2
[   18.099365] No device for DAI omap-mcbsp-dai-3
[   18.103881] No device for DAI omap-mcbsp-dai-4
[   18.108337] OMAP3 Beagle SoC init
[   18.113494] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[   18.126770] ALSA device list:
[   18.129791]   #0: omap3beagle (twl4030)
[   18.133819] oprofile: using arm/armv7
[   18.137786] TCP cubic registered
[   18.141082] NET: Registered protocol family 17
[   18.145599] NET: Registered protocol family 15
[   18.150207] lib80211: common routines for IEEE802.11 drivers
[   18.155944] ThumbEE CPU extension supported.
[   18.160278] Power Management for TI OMAP3.
[   18.165405] ------------[ cut here ]------------
[   18.170074] WARNING: at arch/arm/mach-omap2/dpll.c:439 omap3_noncore_dpll_set_rate+0x228/0x26c()
[   18.178894] Modules linked in:
[   18.182006] [<c0040cb0>] (unwind_backtrace+0x0/0xdc) from [<c006d2a4>] (warn_slowpath_common+0x4c/0x80)
[   18.191467] [<c006d2a4>] (warn_slowpath_common+0x4c/0x80) from [<c004b288>] (omap3_noncore_dpll_set_rate+0x228/0x26c)
[   18.202117] [<c004b288>] (omap3_noncore_dpll_set_rate+0x228/0x26c) from [<c004983c>] (omap2_clk_set_rate+0x24/0x34)
[   18.212615] [<c004983c>] (omap2_clk_set_rate+0x24/0x34) from [<c00511d0>] (clk_set_rate+0x4c/0xbc)
[   18.221649] [<c00511d0>] (clk_set_rate+0x4c/0xbc) from [<c0010d10>] (omap2_clk_set_freq+0x264/0x410)
[   18.230834] [<c0010d10>] (omap2_clk_set_freq+0x264/0x410) from [<c001076c>] (omap3_sr_init+0x104/0x19c)
[   18.240295] [<c001076c>] (omap3_sr_init+0x104/0x19c) from [<c003b384>] (do_one_initcall+0x5c/0x1bc)
[   18.249389] [<c003b384>] (do_one_initcall+0x5c/0x1bc) from [<c0008414>] (kernel_init+0xa4/0x128)
[   18.258239] [<c0008414>] (kernel_init+0xa4/0x128) from [<c003c9fc>] (kernel_thread_exit+0x0/0x8)
[   18.267089] ---[ end trace 3c40ab5c7ab0d315 ]---
[   18.272033] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
[   18.279327] IVA2 clocking rate: 520 MHz
[   18.468719] SmartReflex driver initialized
[   18.480865] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[   18.489288] registered taskstats version 1
[   18.494598] fbcvt: 640x480@60: CVT Name - .307M3-R
[   18.510192] Console: switching to colour frame buffer device 80x30
[   18.524566] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[   18.533966] regulator_init_complete: incomplete constraints, leaving VDAC on
[   18.541320] omap_vout omap_vout: probed for an unknown device
[   18.547515] Waiting for root device /dev/mmcblk0p2...
[   18.656066] mmc0: new high speed SD card at address b368
[   18.661926] mmcblk0: mmc0:b368 SD    1.90 GiB
[   18.666809]  mmcblk0: p1 p2
[   18.818176] kjournald starting.  Commit interval 5 seconds
[   18.828857] EXT3-fs (mmcblk0p2): using internal journal
[   18.834167] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[   18.841339] VFS: Mounted root (ext3 filesystem) on device 179:2.
[   18.886657] devtmpfs: mounted
[   18.889709] Freeing init memory: 204K
[   18.912963] Unable to handle kernel NULL pointer dereference at virtual address 00000014
[   18.921081] pgd = c0004000
[   18.923828] [00000014] *pgd=00000000
[   18.927429] Internal error: Oops: 5 [#1] PREEMPT
[   18.932067] last sysfs file:
[   18.935028] Modules linked in:
[   18.938110] CPU: 0    Tainted: G        W   (2.6.32 #3)
[   18.943389] PC is at musb_interrupt+0x9f8/0xbb8
[   18.947937] LR is at musb_interrupt+0x9e4/0xbb8
[   18.952484] pc : [<c034161c>]    lr : [<c0341608>]    psr: 60000193
[   18.952514] sp : c0625ee0  ip : c0625f18  fp : 000000f0
[   18.964050] r10: 00000000  r9 : 00000099  r8 : 00000009
[   18.969299] r7 : 00000000  r6 : cf82f108  r5 : 00000001  r4 : 00000000
[   18.975860] r3 : 00000000  r2 : 00000000  r1 : fa0ab000  r0 : cf82f108
[   18.982421] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[   18.989837] Control: 10c5387d  Table: 80004019  DAC: 00000017
[   18.995635] Process swapper (pid: 0, stack limit = 0xc06242f0)
[   19.001495] Stack: (0xc0625ee0 to 0xc0626000)
[   19.005859] 5ee0: 2e6008da 38cf8888 2e818feb 00000000 2e19b840 cf82f108 60000113 cf8a0900
[   19.014099] 5f00: c0624000 0000005c 00000000 00000000 c066bac0 c0341840 c0625f48 cf8a0900
[   19.022308] 5f20: c0639148 c00a4328 00000000 cf8a0900 c0639148 0000005c 00000002 00000001
[   19.030548] 5f40: c0624000 0000001f 00000000 c00a64f0 0000005c 00000000 c0627e84 c003b074
[   19.038757] 5f60: 00000001 ffffffff fa200000 c003bb44 00000000 80000013 80000013 00000000
[   19.046997] 5f80: c0624000 c0627fe0 c0627e84 c066facc 8002f154 411fc083 0000001f 00000000
[   19.055206] 5fa0: c0637138 c0625fbc c004ba8c c004c2e4 60000013 ffffffff 00000000 c003cfc4
[   19.063446] 5fc0: 00000000 c06b6ba0 c066fa90 c0031010 c0627e78 c0008984 c0008498 00000000
[   19.071655] 5fe0: 00000000 c0031010 10c53c7d c066fb20 c0031414 80008034 00000000 00000000
[   19.079895] [<c034161c>] (musb_interrupt+0x9f8/0xbb8) from [<c0341840>] (generic_interrupt+0x64/0xa8)
[   19.089172] [<c0341840>] (generic_interrupt+0x64/0xa8) from [<c00a4328>] (handle_IRQ_event+0xac/0x1ec)
[   19.098541] [<c00a4328>] (handle_IRQ_event+0xac/0x1ec) from [<c00a64f0>] (handle_level_irq+0xbc/0x148)
[   19.107910] [<c00a64f0>] (handle_level_irq+0xbc/0x148) from [<c003b074>] (asm_do_IRQ+0x74/0x98)
[   19.116668] [<c003b074>] (asm_do_IRQ+0x74/0x98) from [<c003bb44>] (__irq_svc+0x44/0xa8)
[   19.124725] Exception stack(0xc0625f70 to 0xc0625fb8)
[   19.129791] 5f60:                                     00000000 80000013 80000013 00000000
[   19.138031] 5f80: c0624000 c0627fe0 c0627e84 c066facc 8002f154 411fc083 0000001f 00000000
[   19.146240] 5fa0: c0637138 c0625fbc c004ba8c c004c2e4 60000013 ffffffff
[   19.152893] [<c003bb44>] (__irq_svc+0x44/0xa8) from [<c004c2e4>] (omap3_pm_idle+0x4c/0x50)
[   19.161224] [<c004c2e4>] (omap3_pm_idle+0x4c/0x50) from [<00000000>] (0x0)
[   19.168121] Code: e3530003 13a02000 05963078 05933018 (05d33014)
[   19.174346] ---[ end trace 3c40ab5c7ab0d317 ]---
[   19.178985] Kernel panic - not syncing: Fatal exception in interrupt