API tools faq
paste
nareshkamboju

Hikey-4.4-rc

nareshkamboju
Nov 28th, 2017
85
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 62.20 KB | None | 0 0
raw download clone embed print report
  1. Booting Linux on physical CPU 0x0
  2. Initializing cgroup subsys cpu
  3. Linux version 4.4.103-rc1+ (buildslave@x86-64-08) (gcc version 6.2.1 20161016 (L
  4. inaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Mon Nov 27 18:04:21 UTC 2017
  5. Boot CPU: AArch64 Processor [410fd033]
  6. efi: Getting EFI parameters from FDT:
  7. EFI v2.60 by EDK II
  8. efi:
  9. cma: Reserved 128 MiB at 0x0000000078000000
  10. psci: probing for conduit method from DT.
  11. psci: PSCIv1.1 detected in firmware.
  12. psci: Using standard PSCI v0.2 function IDs
  13. psci: Trusted OS migration not required
  14. PERCPU: Embedded 16 pages/cpu @ffffffc077f21000 s27720 r8192 d29624 u65536
  15. Detected VIPT I-cache on CPU0
  16. CPU features: enabling workaround for ARM erratum 845719
  17. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 507149
  18. Kernel command line: BOOT_IMAGE=/boot/Image console=tty0 console=ttyAMA3,115200n
  19. 8 root=/dev/mmcblk0p9 rootwait rw efi=noruntime
  20. log_buf_len individual max cpu contribution: 4096 bytes
  21. log_buf_len total cpu_extra contributions: 28672 bytes
  22. log_buf_len min size: 16384 bytes
  23. log_buf_len: 65536 bytes
  24. early log buf free: 14672(89%)
  25. PID hash table entries: 4096 (order: 3, 32768 bytes)
  26. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  27. Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  28. software IO TLB [mem 0x71a00000-0x75a00000] (64MB) mapped at [ffffffc071a00000-f
  29. fffffc0759fffff]
  30. Memory: 1798788K/2061364K available (7810K kernel code, 672K rwdata, 3256K rodat
  31. a, 588K init, 13317K bss, 131504K reserved, 131072K cma-reserved)
  32. Virtual kernel memory layout:
  33. vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  34. vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  35. 0xffffffbdc0000000 - 0xffffffbdc2000000 ( 32 MB actual)
  36. fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
  37. PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
  38. modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  39. memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
  40. .init : 0xffffffc000b51000 - 0xffffffc000be4000 ( 588 KB)
  41. .text : 0xffffffc000080000 - 0xffffffc000b50b44 ( 11075 KB)
  42. .data : 0xffffffc000bf9000 - 0xffffffc000ca1000 ( 672 KB)
  43. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  44. Running RCU self tests
  45. Preemptible hierarchical RCU implementation.
  46. RCU lockdep checking is enabled.
  47. Build-time adjustment of leaf fanout to 64.
  48. RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  49. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  50. NR_IRQS:64 nr_irqs:64 0
  51. GIC: Using split EOI/Deactivate mode
  52. SYSPLL: syspll PM status: 0x30007808
  53. SYSPLL: syspll is read: l: 0x8000, u: 0x46F5
  54. SYSPLL: syspll is read: 0x46F58000, 1190494208
  55. SYSPLL: set syspll medpll: 1190400000
  56. SYSPLL: modified fix_rate[8], id=9, f=1190400000
  57. SYSPLL: modified fix_rate[9], id=10, f=1190400000
  58. Architected cp15 timer(s) running at 1.20MHz (phys).
  59. clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, m
  60. ax_idle_ns: 1763180809113 ns
  61. sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns
  62. clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99
  63. 544814920 ns
  64. sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns
  65. Console: colour dummy device 80x25
  66. console [tty0] enabled
  67. Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  68. ... MAX_LOCKDEP_SUBCLASSES: 8
  69. ... MAX_LOCK_DEPTH: 48
  70. ... MAX_LOCKDEP_KEYS: 8191
  71. ... CLASSHASH_SIZE: 4096
  72. ... MAX_LOCKDEP_ENTRIES: 32768
  73. ... MAX_LOCKDEP_CHAINS: 65536
  74. ... CHAINHASH_SIZE: 32768
  75. memory used by lock dependency info: 8159 kB
  76. per task-struct memory footprint: 1920 bytes
  77. Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40
  78. BogoMIPS (lpj=4800)
  79. pid_max: default: 32768 minimum: 301
  80. Security Framework initialized
  81. Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  82. Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  83. Initializing cgroup subsys memory
  84. Initializing cgroup subsys hugetlb
  85. EFI runtime services will be disabled.
  86. ASID allocator initialised with 65536 entries
  87. Detected VIPT I-cache on CPU1
  88. CPU1: Booted secondary processor [410fd033]
  89. Detected VIPT I-cache on CPU2
  90. CPU2: Booted secondary processor [410fd033]
  91. Detected VIPT I-cache on CPU3
  92. CPU3: Booted secondary processor [410fd033]
  93. Detected VIPT I-cache on CPU4
  94. CPU4: Booted secondary processor [410fd033]
  95. Detected VIPT I-cache on CPU5
  96. CPU5: Booted secondary processor [410fd033]
  97. Detected VIPT I-cache on CPU6
  98. CPU6: Booted secondary processor [410fd033]
  99. Detected VIPT I-cache on CPU7
  100. CPU7: Booted secondary processor [410fd033]
  101. Brought up 8 CPUs
  102. SMP: Total of 8 processors activated.
  103. CPU: All CPU(s) started at EL2
  104. alternatives: patching kernel code
  105. devtmpfs: initialized
  106. DMI not present or invalid.
  107. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645
  108. 041785100000 ns
  109. futex hash table entries: 2048 (order: 6, 262144 bytes)
  110. pinctrl core: initialized pinctrl subsystem
  111. NET: Registered protocol family 16
  112. cpuidle: using governor ladder
  113. cpuidle: using governor menu
  114. vdso: 2 pages (1 code @ ffffffc000c01000, 1 data @ ffffffc000c00000)
  115. hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  116. DMA: preallocated 256 KiB pool for atomic allocations
  117. Serial: AMBA PL011 UART driver
  118. f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 re
  119. v2
  120. uart-pl011 f7111000.uart: could not find pctldev for node /soc/pinmux@f7010000/u
  121. art1_pmx_func, deferring probe
  122. uart-pl011 f7112000.uart: could not find pctldev for node /soc/pinmux@f7010000/u
  123. art2_pmx_func, deferring probe
  124. uart-pl011 f7113000.uart: could not find pctldev for node /soc/pinmux@f7010000/u
  125. art3_pmx_func, deferring probe
  126. hi6220-mbox f7510000.mailbox: Mailbox enabled
  127. ACPI: Interpreter disabled.
  128. vgaarb: loaded
  129. SCSI subsystem initialized
  130. ssp-pl022 f7106000.spi: could not find pctldev for node /soc/pinmux@f7010000/spi
  131. 0_pmx_func, deferring probe
  132. usbcore: registered new interface driver usbfs
  133. usbcore: registered new interface driver hub
  134. usbcore: registered new device driver usb
  135. i2c_designware f7100000.i2c: could not find pctldev for node /soc/pinmux@f701000
  136. 0/i2c0_pmx_func, deferring probe
  137. i2c_designware f7101000.i2c: could not find pctldev for node /soc/pinmux@f701000
  138. 0/i2c1_pmx_func, deferring probe
  139. i2c_designware f7102000.i2c: could not find pctldev for node /soc/pinmux@f701000
  140. 0/i2c2_pmx_func, deferring probe
  141. dmi: Firmware registration failed.
  142. Advanced Linux Sound Architecture Driver Initialized.
  143. clocksource: Switched to clocksource arch_sys_counter
  144. pnp: PnP ACPI: disabled
  145. NET: Registered protocol family 2
  146. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  147. TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
  148. TCP: Hash tables configured (established 16384 bind 16384)
  149. UDP hash table entries: 1024 (order: 5, 163840 bytes)
  150. UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
  151. NET: Registered protocol family 1
  152. RPC: Registered named UNIX socket transport module.
  153. RPC: Registered udp transport module.
  154. RPC: Registered tcp transport module.
  155. RPC: Registered tcp NFSv4.1 backchannel transport module.
  156. kvm [1]: interrupt-controller@f6804000 IRQ6
  157. kvm [1]: timer IRQ3
  158. kvm [1]: Hyp mode initialized successfully
  159. audit: initializing netlink subsys (disabled)
  160. audit: type=2000 audit(0.271:1): initialized
  161. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  162. VFS: Disk quotas dquot_6.6.0
  163. VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  164. NFS: Registering the id_resolver key type
  165. Key type id_resolver registered
  166. Key type id_legacy registered
  167. fuse init (API version 7.23)
  168. 9p: Installing v9fs 9p2000 file system support
  169. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  170. io scheduler noop registered
  171. io scheduler cfq registered (default)
  172. test_firmware: interface ready
  173. pinctrl-single f7010000.pinmux: 159 pins at pa ffffff80000a8000 size 636
  174. pinctrl-single f7010800.pinmux: 163 pins at pa ffffff80000aa800 size 652
  175. pinctrl-single f8001800.pinmux: 30 pins at pa ffffff80000ac800 size 120
  176. pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered
  177. pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered
  178. pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered
  179. pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered
  180. pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered
  181. pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered
  182. pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered
  183. pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered
  184. pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered
  185. pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered
  186. pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered
  187. pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered
  188. pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered
  189. pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered
  190. pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered
  191. pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered
  192. pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered
  193. pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered
  194. pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered
  195. pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered
  196. k3-dma f7370000.dma: initialized
  197. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  198. msm_serial: driver initialized
  199. [drm] Initialized drm 1.1.0 20060810
  200. Successfully added driver icn6201
  201. [drm] wait for external HDMI bridge driver.
  202. Mali<2>: Inserting Mali v800 device driver.
  203. Mali<2>: Compiled: Nov 27 2017, time: 18:03:37.
  204. Mali<2>: Driver revision:
  205. Mali<2>: mali_module_init() registering driver
  206. Mali<2>: mali_probe(): Called for platform device 3f100000.mali
  207. Mali<2>: Mali SWAP: Swap out threshold vaule is 60M
  208. Mali<2>: Mali memory settings (shared: 0x40000000)
  209. Mali<2>: Using device defined frame buffer settings (0x00708000@0x3F100000)
  210. Mali<2>: Memory Validator installed for Mali physical address base=0x3F100000, s
  211. ize=0x00708000
  212. Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00001000)
  213. Mali<2>: Broadcast: Creating Mali Broadcast unit: Mali_Broadcast
  214. Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
  215. Mali<2>: Mali PP: Base address of PP core: 0xf4088000
  216. Mali<2>: Found Mali GPU Mali-450 MP r0p0
  217. Mali<2>: Mali DLBU: Initializing
  218. Mali<2>: Mali L2 cache: Created Mali_L2: 8K, 4-way, 64byte cache line, 128bit
  219. external bus
  220. Mali<2>: Mali L2 cache: Created Mali_L2: 128K, 4-way, 64byte cache line, 128bit
  221. external bus
  222. Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
  223. Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3
  224. Mali<2>: Probe: Page fault detect: PASSED
  225. Mali<2>: Probe: Bus read error detect: PASSED
  226. Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
  227. Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
  228. Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3
  229. Mali<2>: Probe: Page fault detect: PASSED
  230. Mali<2>: Probe: Bus read error detect: PASSED
  231. Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
  232. Mali<2>: Mali PP: Base address of PP core: 0xf4088000
  233. Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
  234. Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3
  235. Mali<2>: Probe: Page fault detect: PASSED
  236. Mali<2>: Probe: Bus read error detect: PASSED
  237. Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
  238. Mali<2>: Mali PP: Base address of PP core: 0xf408a000
  239. Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP2_MMU
  240. Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3
  241. Mali<2>: Probe: Page fault detect: PASSED
  242. Mali<2>: Probe: Bus read error detect: PASSED
  243. Mali<2>: Mali PP: Creating Mali PP core: Mali_PP2
  244. Mali<2>: Mali PP: Base address of PP core: 0xf408c000
  245. Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP3_MMU
  246. Mali<2>: mali_mmu_probe_irq_acknowledge: intstat 0x3
  247. Mali<2>: Probe: Page fault detect: PASSED
  248. Mali<2>: Probe: Bus read error detect: PASSED
  249. Mali<2>: Mali PP: Creating Mali PP core: Mali_PP3
  250. Mali<2>: Mali PP: Base address of PP core: 0xf408e000
  251. Mali<2>: Starting new virtual group for MMU PP broadcast core Mali_PP_MMU_Broadc
  252. ast
  253. Mali<2>: Mali DLBU: Creating Mali dynamic load balancing unit: Mali_DLBU
  254. Mali<2>: Broadcast: Creating Mali Broadcast unit: Mali_Broadcast
  255. Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP_MMU_Broadcast
  256. Mali<2>: Mali PP: Creating Mali PP core: Mali_PP_Broadcast
  257. Mali<2>: Mali PP: Base address of PP core: 0xf4096000
  258. Mali<2>: 4+0 PP cores initialized
  259. Mali<2>: Mali GPU Timer: 50
  260. Mali<2>: Mali GPU Utilization: No platform utilization handler installed
  261. Mali<2>: mali_probe(): Successfully initialized driver for platform device 3f100
  262. 000.mali
  263. Mali: Mali device driver loaded
  264. loop: module loaded
  265. sky2: driver version 1.30
  266. dwc2 f72c0000.usb: Configuration mismatch. Forcing host mode
  267. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  268. ehci-pci: EHCI PCI platform driver
  269. ehci-platform: EHCI generic platform driver
  270. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  271. ohci-pci: OHCI PCI platform driver
  272. ohci-platform: OHCI generic platform driver
  273. usbcore: registered new interface driver usb-storage
  274. mousedev: PS/2 mouse device common for all mice
  275. Successfully added driver ft5x0x_ts
  276. rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc0
  277. i2c /dev entries driver
  278. hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 0
  279. sdhci: Secure Digital Host Controller Interface driver
  280. sdhci: Copyright(c) Pierre Ossman
  281. Synopsys Designware Multimedia Card Interface Driver
  282. dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH r
  283. egister as default
  284. dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode.
  285. dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller.
  286. dwmmc_k3 f723d000.dwmmc0: Version ID is 250a
  287. dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 40,32 bit host data width,256
  288. deep fifo
  289. dwmmc_k3 f723d000.dwmmc0: No vqmmc regulator found
  290. dwmmc_k3 f723d000.dwmmc0: 1 slots initialized
  291. dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH r
  292. egister as default
  293. dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode.
  294. dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller.
  295. dwmmc_k3 f723e000.dwmmc1: Version ID is 250a
  296. dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 41,32 bit host data width,128
  297. deep fifo
  298. dwmmc_k3 f723e000.dwmmc1: Got CD GPIO
  299. dwmmc_k3 f723e000.dwmmc1: 1 slots initialized
  300. dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH r
  301. egister as default
  302. dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
  303. dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
  304. dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
  305. dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 42,32 bit host data width,128
  306. deep fifo
  307. sdhci-pltfm: SDHCI platform and OF driver helper
  308. ledtrig-cpu: registered to indicate activity on CPUs
  309. usbcore: registered new interface driver usbhid
  310. usbhid: USB HID core driver
  311. optee firmware:optee: probing for conduit method from DT.
  312. optee firmware:optee: initialized driver
  313. hi6210_i2s f7118000.hi6210_i2s: Registered as hi6210_i2s
  314. hi6210_i2s f7118000.hi6210_i2s: Failed to get DMA channel capabilities, falling
  315. back to period counting: -6
  316. hi6210-hdmi-audio 0.hi6210_hdmi_card: hi6210_hdmi_dai <-> f7118000.hi6210_i2s ma
  317. pping ok
  318. NET: Registered protocol family 10
  319. sit: IPv6 over IPv4 tunneling driver
  320. NET: Registered protocol family 17
  321. 9pnet: Installing 9P2000 support
  322. Key type dns_resolver registered
  323. registered taskstats version 1
  324. f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 re
  325. v2
  326. f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 re
  327. v2
  328. f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 r
  329. ev2
  330. mmc0: MAN_BKOPS_EN bit is not set
  331. mmc_host mmc0: Bus speed (slot 0) = 51756522Hz (slot req 52000000Hz, actual 5175
  332. 6522HZ div = 0)
  333. mmc0: new high speed MMC card at address 0001
  334. mmcblk0: mmc0:0001 H8G1e 7.28 GiB
  335. mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
  336. mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
  337. mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB
  338. Alternate GPT is invalid, using primary GPT.
  339. mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
  340. console [ttyAMA3] enabled
  341. ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022
  342. ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to ffffff800016
  343. e000
  344. ssp-pl022 f7106000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  345. input: ft5x0x_ts as /devices/virtual/input/input0
  346. ft5x0x_ts 0-0038: ft5x0x_i2c_Read: i2c read error.
  347. ft5x0x_ts 0-0038: ft5x0x_i2c_Read: i2c read error.
  348. ft5x0x_ts 0-0038: ft5x0x_i2c_Read: i2c read error.
  349. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  350. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  351. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  352. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  353. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  354. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  355. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  356. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  357. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  358. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  359. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  360. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  361. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  362. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  363. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  364. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  365. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  366. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  367. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  368. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  369. icn6201 1-002d: ic6201_i2c_Write i2c write error.
  370. icn6201 1-002d: ficn6201_i2c_Read: i2c read error.
  371. [drm] hikey_panel_probe enter
  372. [drm] host attach, client name=[n070icn-pb1], id=1
  373. [drm] hikey_panel_probe exit
  374. [drm] host attach, client name=[dummy], id=0
  375. [drm] connector init
  376. kirin-drm f4100000.ade: bound f4107800.dsi (ops dsi_ops)
  377. [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  378. [drm] No driver support for vblank timestamp query.
  379. Console: switching to colour frame buffer device 128x37
  380. kirin-drm f4100000.ade: fb0: frame buffer device
  381. [drm] Initialized kirin 1.0.0 20150718 on minor 0
  382. dwc2 f72c0000.usb: Configuration mismatch. Forcing host mode
  383. f72c0000.usb supply vusb_d not found, using dummy regulator
  384. f72c0000.usb supply vusb_a not found, using dummy regulator
  385. dwc2 f72c0000.usb: DWC OTG Controller
  386. dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1
  387. dwc2 f72c0000.usb: irq 38, io mem 0x00000000
  388. hub 1-0:1.0: USB hub found
  389. hub 1-0:1.0: 1 port detected
  390. dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH r
  391. egister as default
  392. dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
  393. dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
  394. dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
  395. dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 42,32 bit host data width,128
  396. deep fifo
  397. dwmmc_k3 f723f000.dwmmc2: No vqmmc regulator found
  398. dwmmc_k3 f723f000.dwmmc2: 1 slots initialized
  399. dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range
  400. mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 2480
  401. 0000HZ div = 0)
  402. mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  403. mmc2: new SDIO card at address 0001
  404. rtc-pl031 f8003000.rtc: setting system clock to 1970-01-01 00:06:14 UTC (374)
  405. SOC_MED: disabling
  406. LDO2_2V8: disabling
  407. LDO7_SDIO: disabling
  408. LDO10_2V85: disabling
  409. LDO13_1V8: disabling
  410. LDO14_2V8: disabling
  411. LDO17_2V5: disabling
  412. usb 1-1: new high-speed USB device number 2 using dwc2
  413. ALSA device list:
  414. #0: hi6210-hdmi
  415. uart-pl011 f7113000.uart: no DMA platform data
  416. Minicom2.7MinicoEXT4-fs (mmcblk0p9): couldn't mount as ext3 due to feature incom
  417. patibilities
  418. EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
  419. VFS: Mounted root (ext4 filesystem) on device 179:9.
  420. devtmpfs: mounted
  421. Freeing unused kernel memory: 588K
  422. Freeing alternatives memory: 60K
  423. hub 1-1:1.0: USB hub found
  424. hub 1-1:1.0: 3 ports detected
  425. systemd[1]: System time before build time, advancing clock.
  426. random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy a
  427. vailable)
  428. systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPA
  429. RMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOM
  430. P +BLKID -ELFUTILS +KMOD -IDN)
  431. systemd[1]: Detected architecture arm64.
  432. systemd[1]: Running with unpopulated /etc.
  433.  
  434. Welcome to Reference-Platform-Build-X11 2.2+linaro!
  435.  
  436. systemd[1]: Set hostname to <hikey>.
  437. random: systemd: uninitialized urandom read (16 bytes read, 53 bits of entropy a
  438. vailable)
  439. systemd[1]: Initializing machine ID from random generator.
  440. usb 1-1.1: new full-speed USB device number 3 using dwc2
  441. random: systemd: uninitialized urandom read (16 bytes read, 61 bits of entropy a
  442. vailable)
  443. random: systemd: uninitialized urandom read (16 bytes read, 64 bits of entropy a
  444. vailable)
  445. random: systemd: uninitialized urandom read (16 bytes read, 66 bits of entropy a
  446. vailable)
  447. usb 1-1.1: device descriptor read/64, error -71
  448. random: systemd: uninitialized urandom read (16 bytes read, 70 bits of entropy a
  449. vailable)
  450. random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy a
  451. vailable)
  452. random: systemd: uninitialized urandom read (16 bytes read, 81 bits of entropy a
  453. vailable)
  454. random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy a
  455. vailable)
  456. usb 1-1.1: device descriptor read/64, error -71
  457. random: systemd: uninitialized urandom read (16 bytes read, 100 bits of entropy
  458. available)
  459. systemd[1]: Failed to populate /etc with preset unit settings, ignoring: Too man
  460. y levels of symbolic links
  461. random: nonblocking pool is initialized
  462. usb 1-1.1: new full-speed USB device number 4 using dwc2
  463. usb 1-1.1: device descriptor read/64, error -71
  464. systemd[1]: Created slice User and Session Slice.
  465. [ OK ] Created slice User and Session Slice.
  466. systemd[1]: Created slice System Slice.
  467. [ OK ] Created slice System Slice.
  468. usb 1-1.1: device descriptor read/64, error -71
  469. systemd[1]: Created slice system-getty.slice.
  470. [ OK ] Created slice system-getty.slice.
  471. systemd[1]: Reached target Remote File Systems.
  472. [ OK ] Reached target Remote File Systems.
  473. systemd[1]: Listening on Journal Audit Socket.
  474. [ OK ] Listening on Journal Audit Socket.
  475. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  476. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  477. systemd[1]: Listening on udev Kernel Socket.
  478. [ OK ] Listening on udev Kernel Socket.
  479. systemd[1]: Listening on Syslog Socket.
  480. [ OK ] Listening on Syslog Socket.
  481. systemd[1]: Listening on udev Control Socket.
  482. [ OK ] Listening on udev Control Socket.
  483. systemd[1]: Reached target Slices.
  484. [ OK ] Reached target Slices.
  485. systemd[1]: Listening on Journal Socket (/dev/log).
  486. [ OK ] Listening on Journal Socket (/dev/log).
  487. systemd[1]: Reached target Swap.
  488. usb 1-1.1: new full-speed USB device number 5 using dwc2
  489. [ OK ] Reached target Swap.
  490. systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  491. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  492. systemd[1]: Listening on Journal Socket.
  493. [ OK ] Listening on Journal Socket.
  494. systemd[1]: Mounting POSIX Message Queue File System...
  495. Mounting POSIX Message Queue File System...
  496. systemd[1]: Starting Journal Service...
  497. Starting Journal Service...
  498. systemd[1]: Starting Load Kernel Modules...
  499. Starting Load Kernel Modules...
  500. systemd[1]: Mounting Huge Pages File System...
  501. Mounting Huge Pages File System...
  502. systemd[1]: Mounting Temporary Directory...
  503. Mounting Temporary Directory...
  504. systemd[1]: Mounting Debug File System...
  505. Mounting Debug File System...
  506. systemd[1]: Starting Setup Virtual Console...
  507. Starting Setup Virtual Console...
  508. systemd[1]: Starting Remount Root and Kernel File Systems...
  509. Starting Remount Root and Kernel File Systems...
  510. systemd[1]: Starting Create list of required static device nodes for the current
  511. kernel...
  512. EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
  513. Starting Create list of required st... nodes for the current kernel...
  514. systemd[1]: Created slice system-serial\x2dgetty.slice.
  515. [ OK ] Created slice system-serial\x2dgetty.slice.
  516. systemd[1]: Listening on Network Service Netlink Socket.
  517. [ OK ] Listening on Network Service Netlink Socket.
  518. systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  519. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  520. systemd[1]: Reached target Paths.
  521. [ OK ] Reached target Paths.
  522. systemd[1]: Mounted POSIX Message Queue File System.
  523. usb 1-1.1: device not accepting address 5, error -71
  524. [ OK ] Mounted POSIX Message Queue File System.
  525. systemd[1]: Mounted Huge Pages File System.
  526. [ OK ] Mounted Huge Pages File System.
  527. systemd[1]: Mounted Debug File System.
  528. [ OK ] Mounted Debug File System.
  529. systemd[1]: Mounted Temporary Directory.
  530. usb 1-1.1: new full-speed USB device number 6 using dwc2
  531. [ OK ] Mounted Temporary Directory.
  532. systemd[1]: Started Journal Service.
  533. [ OK ] Started Journal Service.
  534. [ OK ] Started Load Kernel Modules.
  535. [ OK ] Started Setup Virtual Console.
  536. [ OK ] Started Remount Root and Kernel File Systems.
  537. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  538. Starting Rebuild Hardware Database...
  539. Starting Create System Users...
  540. Mounting FUSE Control File System...
  541. Starting Apply Kernel Variables...
  542. systemd-sysuser[1115]: syscall 285
  543. Code: aa0503e4 aa0603e5 aa0703e6 d4000001 (b13ffc1f)
  544. CPU: 3 PID: 1115 Comm: systemd-sysuser Not tainted 4.4.103-rc1+ #1
  545. Hardware name: HiKey Development Board (DT)
  546. task: ffffffc0705ebc00 ti: ffffffc06fd14000 task.ti: ffffffc06fd14000
  547. PC is at 0x7f97e961d4
  548. LR is at 0x557f766dac
  549. pc : [<0000007f97e961d4>] lr : [<000000557f766dac>] pstate: 20000000
  550. sp : 0000007fcfcb35a0
  551. x29: 0000007fcfcb35a0 x28: 0000000000000001
  552. x27: 0000000000000001 x26: 0000007fcfcb3810
  553. x25: 0000000000000001 x24: 0000000000000008
  554. x23: 000000557f768db8 x22: 7fffffffffffffff
  555. x21: 00000000ffffffff x20: 0000000000000007
  556. x19: 000000557f787000 x18: 0000000000000000
  557. x17: 0000007f97e961b0 x16: 000000557f787db0
  558. x15: 000000004aae6aa0 x14: 0000000002557355
  559. x13: 0000000090b1eea0 x12: 00000000000027c9
  560. x11: 000000000000001d x10: 000000000004d157
  561. x9 : 0000000000000036 x8 : 000000000000011d
  562. x7 : 0000000000000231 x6 : 0000000000000231
  563. x5 : 0000000000000000 x4 : 7fffffffffffffff
  564. x3 : 0000000000000000 x2 : 0000000000000008
  565. x1 : 0000000000000000 x0 : 0000000000000007
  566.  
  567. Starting Flush Journal to Persistent Storage...
  568. [ OK ] Mounted FUSE Control File System.
  569. [ OK ] Started Create System Users.
  570. usb 1-1.1: device not accepting address 6, error -71
  571. [ OK ] Started Apply Kernel Variablesusb 1-1-port1: unable to enumerate USB de
  572. vice at full-speed while bus at HIGH_SPEED
  573. .
  574. Starting Create Static Device Nodes in /dev...
  575. systemd-journald[1091]: Received request to flush runtime journal from PID 1
  576. [ OK ] Started Flush Journal to Persistent Storage.
  577. [ OK ] Started Create Static Device Nodes in /dev.
  578. Starting udev Kernel Device Manager...
  579. [ OK ] Reached target Local File Systems (Pre).
  580. Mounting /var/volatile...
  581. [ OK ] Mounted /var/volatile.
  582. Starting Load/Save Random Seed...
  583. [ OK ] Reached target Local File Systems.
  584. Starting Rebuild Journal Catalog...
  585. Starting Create Volatile Files and Directories...
  586. Starting Rebuild Dynamic Linker Cache...
  587. [ OK ] Started udev Kernel Device Manager.
  588. [ OK ] Started Load/Save Random Seed.
  589. [ OK ] Started Rebuild Journal Catalog.
  590. [ OK ] Started Create Volatile Files and Directories.
  591. Starting Network Time Synchronization...
  592. Starting Update UTMP about System Boot/Shutdown...
  593. [ OK ] Started Update UTMP about System Boot/Shutdown.
  594. [ OK ] Started Network Time Synchroniusb 1-1: USB disconnect, device number 2
  595. zation.
  596. [ OK ] Reached target System Time Synchronized.
  597. usb 1-1: new full-speed USB device number 7 using dwc2
  598. [ OK ] Started Rebuild Dynamic Linker Cache.
  599. usb 1-1: not running at top speed; connect to a high speed hub
  600. hub 1-1:1.0: USB hub found
  601. hub 1-1:1.0: 3 ports detected
  602. [ OK ] Started Rebuild Hardware Database.
  603. Starting udev Coldplug all Devices...
  604. Starting Update is Completed...
  605. [ OK ] Started Update is Completed.
  606. usb 1-1.1: new full-speed USB device number 8 using dwc2
  607. dm9601 1-1.1:1.0 eth0: register 'dm9601' at usb-f72c0000.usb-1.1, Davicom DM96xx
  608. USB 10/100 Ethernet, 00:10:13:50:a4:90
  609. usbcore: registered new interface driver dm9601
  610. (stk) :sysfs entries created
  611. Bluetooth: Core ver 2.21
  612. Bluetooth: Starting self testing
  613. Bluetooth: Finished self testing
  614. NET: Registered protocol family 31
  615. Bluetooth: HCI device and connection manager initialized
  616. Bluetooth: HCI socket layer initialized
  617. Bluetooth: L2CAP socket layer initialized
  618. Bluetooth: SCO socket layer initialized
  619. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  620. [ OK ] Reached target Sound Card.
  621. (stc): chnl_id list empty :4
  622. (stk) : st_kim_start[ OK ] Found device /dev/ttyAMA2.
  623. [ OK ] Found device /dev/ttyAMA3.
  624. spidev spi32766.0: buggy DT: spidev listed directly in DT
  625. ------------[ cut here ]------------
  626. WARNING: at /srv/oe/build/tmp-rpb-glibc/work-shared/hikey/kernel-source/drivers/
  627. spi/spidev.c:719
  628. Modules linked in: spidev(+) btwilink bluetooth st_drv rfkill dm9601 usbnet
  629.  
  630. CPU: 1 PID: 1549 Comm: systemd-udevd Not tainted 4.4.103-rc1+ #1
  631. Hardware name: HiKey Development Board (DT)
  632. (stk) :ldisc_install = 1
  633. task: ffffffc0705e8000 ti: ffffffc06d678000 task.ti: ffffffc06d678000
  634. PC is at spidev_probe+0x194/0x1f8 [spidev]
  635. LR is at spidev_probe+0x190/0x1f8 [spidev]
  636. pc : [<ffffffbffc0b931c>] lr : [<ffffffbffc0b9318>] pstate: 60000145
  637. sp : ffffffc06d67ba80
  638. x29: ffffffc06d67ba80 x28: ffffffc000136808
  639. x27: 0000000000000021 x26: ffffffc00194a000
  640. x25: 0000000000000001 x24: ffffffc06fef3800
  641. x23: 0000000000000021 x22: ffffffbffc0ba8a0
  642. x21: 0000000000000000 x20: ffffffc0704d1000
  643. x19: ffffffbffc0ba3c0 x18: 00000000fffffff0
  644. x17: 0000007f827a9140 x16: ffffffc0001e2a08
  645. x15: ffffffc000c18c28 x14: ffffffc001947a28
  646. x13: ffffffc000c18000 x12: 0000000000000000
  647. x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
  648. x9 : 01fefefefefefeff x8 : 7f7f7f7f7f7f7f7f
  649. x7 : 756463686f722b77 x6 : 8080808080808000
  650. x5 : 0000000000000001 x4 : 0000000000000002
  651. x3 : 0000000000000000 x2 : 0000000000000006
  652. x1 : ffffffc06d678000 x0 : 0000000000000000
  653.  
  654. ---[ end trace 7b878709b6299e9c ]---
  655. Call trace:
  656. [<ffffffbffc0b931c>] spidev_probe+0x194/0x1f8 [spidev]
  657. [<ffffffc00059b198>] spi_drv_probe+0x78/0xf0
  658. [<ffffffc00053c67c>] driver_probe_device+0x1f4/0x2e0
  659. [<ffffffc00053c80c>] __driver_attach+0xa4/0xa8
  660. [<ffffffc00053a77c>] bus_for_each_dev+0x64/0xa0
  661. [<ffffffc00053bf38>] driver_attach+0x20/0x28
  662. [<ffffffc00053ba88>] bus_add_driver+0x108/0x228
  663. [<ffffffc00053cfd8>] driver_register+0x60/0xf8
  664. [<ffffffc00059b0d0>] __spi_register_driver+0x58/0x60
  665. [<ffffffbffc0bd088>] spidev_init+0x88/0xf0 [spidev]
  666. [<ffffffc000082970>] do_one_initcall+0x90/0x1a8
  667. [<ffffffc00016e1c4>] do_init_module+0x60/0x1ac
  668. [<ffffffc000139f6c>] load_module+0x19e4/0x1ed8
  669. [<ffffffc00013a6b0>] SyS_finit_module+0xb0/0xc0
  670. [<ffffffc000085e30>] el0_svc_naked+0x24/0x28
  671. Starting Load/Save RF Kill Switch Status...
  672. [ OK ] Started udev Coldplug all Devices.
  673. [ OK ] Reached target System Initialization.
  674. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  675. [ OK ] Started Daily Cleanup of Temporary Directories.
  676. wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl18xx-con
  677. f.bin failed with error -2
  678. [ OK ] Reached target Timers.wlcore: ERROR could not get configuration binary
  679. ti-connectivity/wl18xx-conf.bin: -2
  680.  
  681. wlcore: WARNING falling back to default config
  682. [ OK ] Listening on RPCbind Server Activation Socket.
  683. [ OK ] Listening on D-Bus System Message Bus Socket.
  684. Starting sshd.socket.
  685. [ OK ] Listening on sshd.socket.
  686. [ OK ] Reached target Sockets.
  687. [ OK ] Reached target Basic System.
  688. Starting Login Service...
  689. [ OK ] Started Periodic Command Scheduler.
  690. [ OK ] Started Kernel Logging Service.
  691. Starting Resize root filesystem to fit available disk space...
  692. [ OK ] Started Job spooling tools.
  693. [ OK ] Started D-Bus System Message Bus.
  694. wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
  695. Starting Network Service...
  696. wlcore: loaded
  697. Starting Network Manager...
  698. [ OK ] Started TEE Supplicant.
  699. Starting Avahi mDNS/DNS-SD Stack...
  700. Starting Save/Restore Sound Card State...
  701. [ OK ] Started System Logging Service.
  702. Starting Bluetooth service...
  703. [ OK ] Started Load/Save RF Kill Switch Status.
  704. [ OK ] Starte(stk) :ldisc installation timeoutd Network Servic
  705. e.
  706. (stk) :ldisc_install = 0[ OK ] Started Save/Restore Sound Card State.
  707. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  708. [ OK ] Started Login Service.
  709. [ OK ] Started Network Manager.
  710. [ OK ] Started Bluetooth service.
  711. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  712. Bluetooth: BNEP filters: protocol multicast
  713. Bluetooth: BNEP socket layer initialized
  714. [ OK ] Reached target Bluetooth.
  715. [ OK ] Reached target Network.
  716. Starting DNS forwarder and DHCP server...
  717. Starting Network Name Resolution...
  718. Starting Permit User Sessions...
  719. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  720. dm9601 1-1.1:1.0 eth0: link down
  721. [ OK ] Started Permit User Sessions.
  722. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  723. Starting Hostname Service...
  724. [ OK ] Started Serial Getty on ttyAMA3.
  725. IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  726. [ OK ] Started Getty on tty1.
  727. [ OK ] Started Serial Getty on ttyAMA2.
  728. [ OK ] Reached target Login Prompts.
  729. [ OK ] Started Network Name Resolution.
  730. [ OK ] Started DNS forwarder and DHCP server.
  731. [ OK ] Reached target Multi-User System.
  732. Starting Update UTMP about System Runlevel Changes...
  733. mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000
  734. HZ div = 31)
  735. [ OK ] Started Update UTMP about System Runlevel Changes.
  736. [ OK ] Started Hostname Service.
  737. mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 2480
  738. 0000HZ div = 0)
  739. wlcore: PHY firmware version: Rev 8.2.0.0.236
  740. wlcore: firmware booted (Rev 8.9.0.0.69)
  741. IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  742. Starting WPA supplicant...
  743. Starting Authorization Manager...
  744. (stk) : timed out waiting for ldisc to be un-installed[ OK ] Started WPA suppl
  745. icant.
  746.  
  747. blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
  748. (stk) :ldisc_install = 1
  749. IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  750. [ OK ] Started Authorization Manager.
  751. blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
  752. blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
  753. blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
  754. blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
  755. blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
  756. (stk) :ldisc installation timeout
  757. (stk) :ldisc_install = 0EXT4-fs (mmcblk0p9): resizing filesystem from 626688 to
  758. 1757691 blocks
  759. EXT4-fs (mmcblk0p9): resized filesystem to 1757691
  760. (stk) : timed out waiting for ldisc to be un-installed
  761. (stk) :ldisc_install = 1[ OK ] Started Resize root filesystem to fit available
  762. disk space.
  763. uart-pl011 f7112000.uart: no DMA platform data
  764. (stk) :ldisc installation timeout
  765. (stk) :ldisc_install = 0
  766. Reference-Platform-Build-X11 2.2+linaro hikey ttyAMA3
  767.  
  768. hikey login: (stk) : timed out waiting for ldisc to be un-installed
  769. (stk) :ldisc_install = 1(stk) :ldisc installation timeout
  770. (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
  771. (stk) :ldisc_install = 1(stk) :ldisc installation timeout
  772. (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
  773. (stk) :ldisc_install = 1(stk) :ldisc installation timeout
  774. (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
  775. Bluetooth: st_register failed -22
  776.  
  777. Reference-Platform-Build-X11 2.2+linaro hikey ttyAMA3
  778.  
  779. hikey login: linaro
  780. su^[[24;80Rhikey:~$
  781. hikey:~$ su
  782. hikey:/home/linaro# cat /proc/version
  783. Linux version 4.4.103-rc1+ (buildslave@x86-64-08) (gcc version 6.2.1 20161016 (L
  784. inaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Mon Nov 27 18:04:21 UTC 2017
  785. hikey:/home/linaro#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!