Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- % Please answer 'yes' or 'no'.
- Would you like to enter the initial configuration dialog? [yes/no]: no
- Press RETURN to get started!
- *Jan 2 00:00:03.511: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module nam e = c2900 Next reboot level = ipbasek9 and License = ipbasek9
- *Oct 26 08:16:53.667: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-S ervice-Engine0/0
- *Oct 26 08:17:08.055: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed stat e to down
- *Oct 26 08:17:08.055: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed stat e to down
- *Oct 26 08:17:08.055: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed stat e to down
- *Oct 26 08:17:08.055: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to do wn
- *Oct 26 08:17:08.055: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to do wn
- *Oct 26 08:17:09.199: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth ernet0/0, changed state to down
- *Oct 26 08:17:09.199: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth ernet0/1, changed state to down
- *Oct 26 08:17:09.199: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth ernet0/2, changed state to down
- *Oct 26 08:17:09.199: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/ 0, changed state to down
- *Oct 26 08:17:09.199: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/ 1, changed state to down
- *Oct 26 08:17:09.999: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuratio n is ignored based on the configuration register setting.
- *Oct 26 08:30:41.135: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed sta te to administratively down
- *Oct 26 08:30:42.947: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, cha nged state to administratively down
- *Oct 26 08:30:42.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed sta te to administratively down
- *Oct 26 08:30:42.947: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed sta te to administratively down
- *Oct 26 08:30:42.947: %LINK-5-CHANGED: Interface Serial0/0/0, changed state to a dministratively down
- *Oct 26 08:30:42.947: %LINK-5-CHANGED: Interface Serial0/0/1, changed state to a dministratively down
- *Oct 26 08:30:43.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-S ervice-Engine0/0, changed state to down
- *Oct 26 08:30:44.531: %SYS-5-RESTART: System restarted --
- Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.3(3)M5, REL EASE SOFTWARE (fc3)
- Technical Support: http://www.cisco.com/techsupport
- Copyright (c) 1986-2015 by Cisco Systems, Inc.
- Compiled Wed 04-Feb-15 09:02 by prod_rel_team
- Router>enable
- Router#erase startup config
- ^
- % Invalid input detected at '^' marker.
- Router#erase startup-config
- Erasing the nvram filesystem will remove all configuration files! Continue? [con firm]^[
- File system erase is not confirmed or Could not be completed
- Router#erase startup-config
- Erasing the nvram filesystem will remove all configuration files! Continue? [con firm]
- [OK]
- Erase of nvram: complete
- Router#
- *Oct 26 08:32:39.531: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
- Router#ipconfig
- Translating "ipconfig"...domain server (255.255.255.255)
- % Bad IP address or host name
- Translating "ipconfig"...domain server (255.255.255.255)
- (255.255.255.255)
- % Unknown command or computer name, or unable to find computer address
- Router#if config
- ^
- % Invalid input detected at '^' marker.
- Router#show ip route
- Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2
- i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
- ia - IS-IS inter area, * - candidate default, U - per-user static route
- o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
- a - application route
- + - replicated route, % - next hop override
- Gateway of last resort is not set
- Router#configure terminal
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#interface GigabitEthernet0/0
- Router(config-if)#ip addr 192.168.2.1 255.255.255.0
- Router(config-if)#no shutdown
- Router(config-if)#exit
- Router(config)#
- *Oct 26 08:42:35.383: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
- *Oct 26 08:42:38.055: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
- *Oct 26 08:42:39.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
- Router(config)#interface S0/0/1
- Router(config-if)#ip addr 192.168.1.1 255.255.255.0
- Router(config-if)#no shutdown
- Router(config-if)#clokc
- *Oct 26 08:43:35.403: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to up
- *Oct 26 08:43:36.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to
- % Incomplete command.
- Router(config-if)#clock rate 56000
- Router(config-if)#exit
- Router(config)#logout
- ^
- % Invalid input detected at '^' marker.
- Router(config)#exit
- Router#
- *Oct 26 08:44:10.495: %SYS-5-CONFIG_I: Configured from console by consolehttps://www.dropbox.com/home/LSR_IIST5_CZW1015/Lab_Instrukcje?
- % Unrecognized command
- Router#$.pdfhttps://www.dropbox.com/home/LSR_IIST5_CZW1015/Lab_Instrukcje?
- % Unrecognized command
- Router#configure terminal
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#ip route 172.16.1.0 255.255.255.0 192.168.1.2
- Router(config)#show ip route
- ^
- % Invalid input detected at '^' marker.
- Router(config)#exit
- Router#configure terminal
- *Oct 26 08:56:37.479: %SYS-5-CONFIG_I: Configured from
- Router#show ip route
- Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2
- i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
- ia - IS-IS inter area, * - candidate default, U - per-user static route
- o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
- a - application route
- + - replicated route, % - next hop override
- Gateway of last resort is not set
- 172.16.0.0/24 is subnetted, 1 subnets
- S 172.16.1.0 [1/0] via 192.168.1.2
- 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.1.0/24 is directly connected, Serial0/0/1
- L 192.168.1.1/32 is directly connected, Serial0/0/1
- 192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.2.0/24 is directly connected, GigabitEthernet0/0
- L 192.168.2.1/32 is directly connected, GigabitEthernet0/0
- Router#
- Router#
- Router#show ip route
- Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2
- i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
- ia - IS-IS inter area, * - candidate default, U - per-user static route
- o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
- a - application route
- + - replicated route, % - next hop override
- Gateway of last resort is not set
- 172.16.0.0/24 is subnetted, 1 subnets
- S 172.16.1.0 [1/0] via 192.168.1.2
- 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.1.0/24 is directly connected, Serial0/0/1
- L 192.168.1.1/32 is directly connected, Serial0/0/1
- 192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.2.0/24 is directly connected, GigabitEthernet0/0
- L 192.168.2.1/32 is directly connected, GigabitEthernet0/0
- Router#
- Router con0 is now available
- Press RETURN to get started.
- Router>enable
- Router#configure terminal
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#ip route 172.16.2.0 255.255.255.0 S0/0/1
- Router(config)#exit
- Router#
- *Oct 26 09:23:18.135: %SYS-5-CONFIG_I: Configured from console by console
- Router#show ip route
- Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2
- i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
- ia - IS-IS inter area, * - candidate default, U - per-user static route
- o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
- a - application route
- + - replicated route, % - next hop override
- Gateway of last resort is not set
- 172.16.0.0/24 is subnetted, 2 subnets
- S 172.16.1.0 [1/0] via 192.168.1.2
- S 172.16.2.0 is directly connected, Serial0/0/1
- 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.1.0/24 is directly connected, Serial0/0/1
- L 192.168.1.1/32 is directly connected, Serial0/0/1
- 192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.2.0/24 is directly connected, GigabitEthernet0/0
- L 192.168.2.1/32 is directly connected, GigabitEthernet0/0
- Router#show run
- Building configuration...
- Current configuration : 1312 bytes
- !
- ! Last configuration change at 09:23:18 UTC Thu Oct 26 2017
- version 15.3
- service timestamps debug datetime msec
- service timestamps log datetime msec
- no service password-encryption
- !
- hostname Router
- !
- boot-start-marker
- boot-end-marker
- !
- !
- !
- no aaa new-model
- !
- !
- !
- !
- !
- !
- !
- ip cef
- no ipv6 cef
- multilink bundle-name authenticated
- !
- !
- !
- !
- license udi pid CISCO2911/K9 sn FCZ1731708K
- !
- !
- !
- redundancy
- !
- !
- !
- !
- !
- !
- interface Embedded-Service-Engine0/0
- no ip address
- shutdown
- !
- interface GigabitEthernet0/0
- ip address 192.168.2.1 255.255.255.0
- duplex auto
- speed auto
- !
- interface GigabitEthernet0/1
- no ip address
- shutdown
- duplex auto
- speed auto
- !
- interface GigabitEthernet0/2
- no ip address
- shutdown
- duplex auto
- speed auto
- !
- interface Serial0/0/0
- no ip address
- shutdown
- clock rate 2000000
- !
- interface Serial0/0/1
- ip address 192.168.1.1 255.255.255.0
- clock rate 56000
- !
- ip forward-protocol nd
- !
- no ip http server
- no ip http secure-server
- !
- ip route 172.16.1.0 255.255.255.0 192.168.1.2
- ip route 172.16.2.0 255.255.255.0 Serial0/0/1
- !
- !
- !
- !
- control-plane
- !
- !
- !
- line con 0
- line aux 0
- line 2
- no activation-character
- no exec
- transport preferred none
- Router#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#no
- % Incomplete command.
- Router(config)#no
- Router#
- *Oct 26 09:30:32.899: %SYS-5-CONFIG_I: Configured from console by console
- Router#conft
- Translating "conft"...domain server (255.255.255.255)
- % Bad IP address or host name
- Translating "conft"...domain server (255.255.255.255)
- (255.255.255.255)
- Translating "conft"...domain server (255.255.255.255)
- % Unknown command or computer name, or unable to find computer address
- Router#co
- Router#
- Router#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#no Translating "conft"...domain server (255.255.255.255)
- ^
- % Invalid input detected at '^' marker.
- Router(config)#no ip route 172.16.1.0 255.255.255.0 192.168.1.2
- Router(config)#exit
- Router#
- *Oct 26 09:32:54.571: %SYS-5-CONFIG_I: Configured from console by console
- Router#show ip route
- Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2
- i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
- ia - IS-IS inter area, * - candidate default, U - per-user static route
- o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
- a - application route
- + - replicated route, % - next hop override
- Gateway of last resort is not set
- 172.16.0.0/24 is subnetted, 1 subnets
- S 172.16.2.0 is directly connected, Serial0/0/1
- 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.1.0/24 is directly connected, Serial0/0/1
- L 192.168.1.1/32 is directly connected, Serial0/0/1
- 192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks
- C 192.168.2.0/24 is directly connected, GigabitEthernet0/0
- L 192.168.2.1/32 is directly connected, GigabitEthernet0/0
- Router#run sh
- ^
- % Invalid input detected at '^' marker.
- Router#sh run
- Building configuration...
- Current configuration : 1266 bytes
- !
- ! Last configuration change at 09:32:54 UTC Thu Oct 26 2017
- version 15.3
- service timestamps debug datetime msec
- service timestamps log datetime msec
- no service password-encryption
- !
- hostname Router
- !
- boot-start-marker
- boot-end-marker
- !
- !
- !
- no aaa new-model
- !
- !
- !
- !
- !
- !
- !
- ip cef
- no ipv6 cef
- multilink bundle-name authenticated
- !
- !
- !
- !
- license udi pid CISCO2911/K9 sn FCZ1731708K
- !
- !
- !
- redundancy
- !
- !
- !
- !
- !
- !
- interface Embedded-Service-Engine0/0
- no ip address
- shutdown
- !
- interface GigabitEthernet0/0
- ip address 192.168.2.1 255.255.255.0
- duplex auto
- speed auto
- !
- interface GigabitEthernet0/1
- no ip address
- shutdown
- duplex auto
- speed auto
- !
- interface GigabitEthernet0/2
- no ip address
- shutdown
- duplex auto
- speed auto
- !
- interface Serial0/0/0
- no ip address
- shutdown
- clock rate 2000000
- !
- interface Serial0/0/1
- ip address 192.168.1.1 255.255.255.0
- clock rate 56000
- !
- ip forward-protocol nd
- !
- no ip http server
- no ip http secure-server
- !
- ip route 172.16.2.0 255.255.255.0 Serial0/0/1
- !
- !
- !
- !
- control-plane
- !
- !
- !
- line con 0
- line aux 0
- line 2
- no activation-character
- no exec
- transport preferred none
- transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
- stopbits 1
- line vty 0 4
- login
- transport input all
- !
- scheduler allocate 20000 1000
- !
- end
- Router#conf t
- Enter configuration commands, one per line. End with CNTL/Z.
- Router(config)#no ip route 172.16.2.0 255.255.255.0 S0/0/1
- Router(config)#ip route 0.0.0.0 0.0.0.0 S0/0/1
- Router(config)#exit
- Router#
- *Oct 26 09:34:45.379: %SYS-5-CONFIG_I: Configured from console by console
- Router#sh run
- Building configuration...
- Current configuration : 1257 bytes
- !
- ! Last configuration change at 09:34:45 UTC Thu Oct 26 2017
- version 15.3
- service timestamps debug datetime msec
- service timestamps log datetime msec
- no service password-encryption
- !
- hostname Router
- !
- boot-start-marker
- boot-end-marker
- !
- !
- !
- no aaa new-model
- !
- !
- !
- !
- !
- !
- !
- ip cef
- no ipv6 cef
- multilink bundle-name authenticated
- !
- !
- !
- !
- license udi pid CISCO2911/K9 sn FCZ1731708K
- !
- !
- !
- redundancy
- !
- !
- !
- !
- !
- !
- interface Embedded-Service-Engine0/0
- no ip address
- shutdown
- !
- interface GigabitEthernet0/0
- ip address 192.168.2.1 255.255.255.0
- duplex auto
- speed auto
- !
- interface GigabitEthernet0/1
- no ip address
- shutdown
- duplex auto
- speed auto
- !
- interface GigabitEthernet0/2
- no ip address
- shutdown
- duplex auto
- speed auto
- !
- interface Serial0/0/0
- no ip address
- shutdown
- clock rate 2000000
- !
- interface Serial0/0/1
- ip address 192.168.1.1 255.255.255.0
- clock rate 56000
- !
- ip forward-protocol nd
- !
- no ip http server
- no ip http secure-server
- !
- ip route 0.0.0.0 0.0.0.0 Serial0/0/1
- !
- !
- !
- !
- control-plane
- !
- !
- !
- line con 0
- line aux 0
- line 2
- no activation-character
- no exec
- transport preferred none
- transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
- stopbits 1
- line vty 0 4
- login
- transport input all
- !
- scheduler allocate 20000 1000
- !
- end
- Router#
- Router con0 is now available
- Press RETURN to get started.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement