Advertisement
Guest User

Untitled

a guest
Oct 28th, 2013
405
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49) Allwinner Technoloy
  2.  
  3. CPU: Allwinner A20 (SUN7I)
  4. Board: Cubieboard2
  5. I2C: ready
  6. DRAM: 1 GiB
  7. MMC: SUNXI SD/MMC: 0
  8. *** Warning - bad CRC, using default environment
  9.  
  10. In: serial
  11. Out: serial
  12. Err: serial
  13. Net: emac
  14. Hit any key to stop autoboot: 0
  15. reading uEnv.txt
  16. 260 bytes read in 5 ms (50.8 KiB/s)
  17. Loaded environment from uEnv.txt
  18. reading boot.scr
  19. ** Unable to read file boot.scr **
  20. Failed to mount ext2 filesystem...
  21. ** Unrecognized filesystem type **
  22. Failed to mount ext2 filesystem...
  23. ** Unrecognized filesystem type **
  24. Failed to mount ext2 filesystem...
  25. ** Unrecognized filesystem type **
  26. reading script.bin
  27. 45088 bytes read in 10 ms (4.3 MiB/s)
  28. reading uImage
  29. 3887904 bytes read in 183 ms (20.3 MiB/s)
  30. ## Booting kernel from Legacy Image at 48000000 ...
  31. Image Name:
  32. Created: 2013-09-18 10:17:20 UTC
  33. Image Type: ARM Linux Kernel Image (uncompressed)
  34. Data Size: 3887840 Bytes = 3.7 MiB
  35. Load Address: 40008000
  36. Entry Point: 40008000
  37. Verifying Checksum ... OK
  38. Loading Kernel Image ... OK
  39. OK
  40.  
  41. Starting kernel ...
  42.  
  43. [ 0.000000] Booting Linux on physical CPU 0
  44. [ 0.000000] Initializing cgroup subsys cpuset
  45. [ 0.000000] Initializing cgroup subsys cpu
  46. [ 0.000000] Linux version 3.3.0 (rolivo@build) (gcc version 4.6.3 20120201 (3
  47. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c53c7d
  48. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
  49. [ 0.000000] Machine: sun7i
  50. [ 0.000000] [sun7i_fixup]: From boot, get meminfo:
  51. [ 0.000000] Start: 0x40000000
  52. [ 0.000000] Size: 1024MB
  53. [ 0.000000] memory reserved(in bytes):
  54. [ 0.000000] : 0x43000000, 0x00010000
  55. [ 0.000000] : 0x52000000, 0x00020000
  56. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  57. [ 0.000000] On node 0 totalpages: 216064
  58. [ 0.000000] free_area_init_node: node 0, pgdat c077dc00, node_mem_map d000000
  59. [ 0.000000] DMA zone: 576 pages used for memmap
  60. [ 0.000000] DMA zone: 0 pages reserved
  61. [ 0.000000] DMA zone: 64960 pages, LIFO batch:15
  62. [ 0.000000] Normal zone: 1134 pages used for memmap
  63. [ 0.000000] Normal zone: 81810 pages, LIFO batch:15
  64. [ 0.000000] HighMem zone: 594 pages used for memmap
  65. [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
  66. [ 0.000000] [scu_get_core_count] cores=1800001
  67. [ 0.000000] sun7i_init_early: enter
  68. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0908000 s5504 r8192 d14976 u32768
  69. [ 0.000000] pcpu-alloc: s5504 r8192 d14976 u32768 alloc=8*4096
  70. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  71. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0
  72. [ 0.000000] Kernel command line: console=ttyS0,115200 root= loglevel=8 panic9
  73. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  74. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  75. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  76. [ 0.000000] Memory: 64MB 780MB = 844MB total
  77. [ 0.000000] Memory: 844956k/844956k available, 203620k reserved, 270336K higm
  78. [ 0.000000] Virtual kernel memory layout:
  79. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  80. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  81. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  82. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  83. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  84. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  85. [ 0.000000] .text : 0xc0008000 - 0xc06fd7ac (7126 kB)
  86. [ 0.000000] .init : 0xc06fe000 - 0xc072f580 ( 198 kB)
  87. [ 0.000000] .data : 0xc0730000 - 0xc077eb20 ( 315 kB)
  88. [ 0.000000] .bss : 0xc077eb44 - 0xc08c9cf8 (1325 kB)
  89. [ 0.000000] Preemptible hierarchical RCU implementation.
  90. [ 0.000000] NR_IRQS:160
  91. [ 0.000000] aw_clkevt_init: timer base 0xf000cc00
  92. [ 0.000000] [aw_delay]: It is use use_time_delay function!
  93. [ 0.000000] aw_clksrc_init(96)
  94. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 1789s
  95. [ 0.000000] aw_clksrc_init(120)
  96. [ 0.000000] Architected local timer running at 24.00MHz.
  97. [ 0.000000] Console: colour dummy device 80x30
  98. [ 0.000471] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  99. [ 0.059957] pid_max: default: 32768 minimum: 301
  100. [ 0.060350] Mount-cache hash table entries: 512
  101. [ 0.061038] CPU: Testing write buffer coherency: ok
  102. [ 0.061339] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  103. [ 0.061430] Setting up static identity map for 0x404f8b80 - 0x404f8bd8
  104. [ 0.174260] CPU1: Booted secondary processor
  105. [ 0.231624] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  106. [ 0.231719] Brought up 2 CPUs
  107. [ 0.231730] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  108. [ 0.232626] devtmpfs: initialized
  109. [ 0.236719] script_init enter!
  110. [ 0.237554] script_init exit!
  111. [ 0.238251] kworker/u:0 used greatest stack depth: 6576 bytes left
  112. [ 0.239311] print_constraints: dummy:
  113. [ 0.239964] NET: Registered protocol family 16
  114. [ 0.240256] sunxi_dump_init success
  115. [ 0.241760] kworker/u:0 used greatest stack depth: 6408 bytes left
  116. [ 0.242160] sun7i_init: enter
  117. [ 0.242746] [ccu-inf] aw clock manager init
  118. [ 0.242756] [ccu-inf] aw_ccu_init
  119. [ 0.242959] [ccu-inf] script config pll3 to 297MHz
  120. [ 0.242972] [ccu-inf] script config pll4 to 300MHz
  121. [ 0.242983] [ccu-inf] script config pll6 to 600MHz
  122. [ 0.242994] [ccu-inf] script config pll7 to 297MHz
  123. [ 0.243004] [ccu-inf] script config pll8 to 336MHz
  124. [ 0.243592] axp config [pmu_para] [pmu_used] : 1
  125. [ 0.243604] axp config [pmu_para] [pmu_twi_id] : 0
  126. [ 0.243614] axp config [pmu_para] [pmu_irq_id] : 32
  127. [ 0.243623] axp config [pmu_para] [pmu_twi_addr] : 52
  128. [ 0.243632] axp config [pmu_para] [pmu_battery_rdc] : 120
  129. [ 0.243642] axp config [pmu_para] [pmu_battery_cap] : 2100
  130. [ 0.243652] axp config [pmu_para] [pmu_init_chgcur] : 300
  131. [ 0.243661] axp config [pmu_para] [pmu_suspend_chgcur] : 1000
  132. [ 0.243672] axp config [pmu_para] [pmu_resume_chgcur] : 300
  133. [ 0.243682] axp config [pmu_para] [pmu_shutdown_chgcur] : 1000
  134. [ 0.243691] axp config [pmu_para] [pmu_init_chgvol] : 4200
  135. [ 0.243701] axp config [pmu_para] [pmu_init_chgend_rate] : 15
  136. [ 0.243711] axp config [pmu_para] [pmu_init_chg_enabled] : 1
  137. [ 0.243721] axp config [pmu_para] [pmu_init_adc_freq] : 100
  138. [ 0.243731] axp config [pmu_para] [pmu_init_adc_freqc] : 100
  139. [ 0.243741] axp config [pmu_para] [pmu_init_chg_pretime] : 50
  140. [ 0.243751] axp config [pmu_para] [pmu_init_chg_csttime] : 720
  141. [ 0.243760] axp config [pmu_para] [pmu_bat_para1] : 0
  142. [ 0.243770] axp config [pmu_para] [pmu_bat_para2] : 0
  143. [ 0.243779] axp config [pmu_para] [pmu_bat_para3] : 0
  144. [ 0.243789] axp config [pmu_para] [pmu_bat_para4] : 0
  145. [ 0.243798] axp config [pmu_para] [pmu_bat_para5] : 5
  146. [ 0.243807] axp config [pmu_para] [pmu_bat_para6] : 11
  147. [ 0.243817] axp config [pmu_para] [pmu_bat_para7] : 13
  148. [ 0.243828] axp config [pmu_para] [pmu_bat_para8] : 15
  149. [ 0.243837] axp config [pmu_para] [pmu_bat_para9] : 19
  150. [ 0.243847] axp config [pmu_para] [pmu_bat_para10] : 32
  151. [ 0.243856] axp config [pmu_para] [pmu_bat_para11] : 50
  152. [ 0.243866] axp config [pmu_para] [pmu_bat_para12] : 58
  153. [ 0.243875] axp config [pmu_para] [pmu_bat_para13] : 71
  154. [ 0.243885] axp config [pmu_para] [pmu_bat_para14] : 81
  155. [ 0.243896] axp config [pmu_para] [pmu_bat_para15] : 89
  156. [ 0.243906] axp config [pmu_para] [pmu_bat_para16] : 100
  157. [ 0.243915] axp config [pmu_para] [pmu_usbvol_limit] : 1
  158. [ 0.243925] axp config [pmu_para] [pmu_usbvol] : 4000
  159. [ 0.243935] axp config [pmu_para] [pmu_usbcur_limit] : 0
  160. [ 0.243944] axp config [pmu_para] [pmu_usbcur] : 0
  161. [ 0.243953] axp config [pmu_para] [pmu_pwroff_vol] : 3300
  162. [ 0.243963] axp config [pmu_para] [pmu_pwron_vol] : 2900
  163. [ 0.243973] axp config [target] [dcdc2_vol] : 1400
  164. [ 0.243982] axp config [target] [dcdc3_vol] : 1250
  165. [ 0.243990] axp config [target] [ldo2_vol] : 3000
  166. [ 0.243999] axp config [target] [ldo3_vol] : 2800
  167. [ 0.244008] axp config [target] [ldo4_vol] : 2800
  168. [ 0.244017] axp config [pmu_para] [pmu_pekoff_time] : 6000
  169. [ 0.244027] axp config [pmu_para] [pmu_pekoff_en] : 1
  170. [ 0.244037] axp config [pmu_para] [pmu_peklong_time] : 1500
  171. [ 0.244047] axp config [pmu_para] [pmu_pwrok_time] : 64
  172. [ 0.244057] axp config [pmu_para] [pmu_pwrnoe_time] : 2000
  173. [ 0.244067] axp config [pmu_para] [pmu_intotp_en] : 1
  174. [ 0.244076] axp config [pmu_para] [pmu_pekon_time] : 1000
  175. [ 0.244474] [gpio-inf] aw gpio init start
  176. [ 0.244500] [gpio-inf] gpio_clk_init: apb pio clk enable success
  177. [ 0.244729] gpiochip_add: registered GPIOs 0 to 17 on device: GPA
  178. [ 0.244930] gpiochip_add: registered GPIOs 24 to 47 on device: GPB
  179. [ 0.245108] gpiochip_add: registered GPIOs 54 to 78 on device: GPC
  180. [ 0.245297] gpiochip_add: registered GPIOs 85 to 112 on device: GPD
  181. [ 0.245480] gpiochip_add: registered GPIOs 119 to 130 on device: GPE
  182. [ 0.245699] gpiochip_add: registered GPIOs 137 to 142 on device: GPF
  183. [ 0.245923] gpiochip_add: registered GPIOs 149 to 160 on device: GPG
  184. [ 0.246106] gpiochip_add: registered GPIOs 167 to 194 on device: GPH
  185. [ 0.246288] gpiochip_add: registered GPIOs 201 to 222 on device: GPI
  186. [ 0.246690] [gpio-inf] aw gpio init done
  187. [ 0.292011] bio: create slab <bio-0> at 0
  188. [ 0.294043] SCSI subsystem initialized
  189. [ 0.294484] libata version 3.00 loaded.
  190. [ 0.295408] usbcore: registered new interface driver usbfs
  191. [ 0.295766] usbcore: registered new interface driver hub
  192. [ 0.296073] usbcore: registered new device driver usb
  193. [ 0.296752] [i2c3] fetch para from sysconfig failed
  194. [ 0.296763] [i2c4] fetch para from sysconfig failed
  195. [ 0.298006] -------------------------------------------
  196. [ 0.298018] axp_mfd_probe:axp20_mfd pmu probed !
  197. [ 0.298024] -------------------------------------------
  198. [ 0.300360] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  199. [ 0.301038] -------------------------------------------
  200. [ 0.301047] axp_mfd_probe:axp20_mfd pmu request_irq ok !
  201. [ 0.301054] -------------------------------------------
  202. [ 0.302909] [AXP]axp driver uning configuration failed(348)
  203. [ 0.302920] [AXP]power_start = 0
  204. [ 0.302946] I2C: i2c-0: sun7i I2C adapter
  205. [ 0.302953] **********start************
  206. [ 0.302960] 0x40
  207. [ 0.302965] 0xf8
  208. [ 0.302970] 0x58
  209. [ 0.302976] 0x0
  210. [ 0.302981] 0x0
  211. [ 0.302988] **********end************
  212. [ 0.303402] I2C: i2c-1: sun7i I2C adapter
  213. [ 0.303412] **********start************
  214. [ 0.303419] 0x40
  215. [ 0.303425] 0xf8
  216. [ 0.303430] 0x58
  217. [ 0.303435] 0x0
  218. [ 0.303440] 0x0
  219. [ 0.303445] **********end************
  220. [ 0.303770] I2C: i2c-2: sun7i I2C adapter
  221. [ 0.303778] **********start************
  222. [ 0.303785] 0x40
  223. [ 0.303791] 0xf8
  224. [ 0.303796] 0x28
  225. [ 0.303801] 0x0
  226. [ 0.303806] 0x0
  227. [ 0.303811] **********end************
  228. [ 0.304402] print_constraints: axp20_ldo1: 1300 mV
  229. [ 0.306093] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  230. [ 0.307761] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  231. [ 0.309639] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  232. [ 0.311341] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  233. [ 0.313025] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  234. [ 0.314034] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  235. [ 0.314841] gpiochip_add: registered GPIOs 229 to 233 on device: axp_pin
  236. [ 0.316076] Advanced Linux Sound Architecture Driver Version 1.0.24.
  237. [ 0.317306] Bluetooth: Core ver 2.16
  238. [ 0.317524] NET: Registered protocol family 31
  239. [ 0.317535] Bluetooth: HCI device and connection manager initialized
  240. [ 0.317550] Bluetooth: HCI socket layer initialized
  241. [ 0.317559] Bluetooth: L2CAP socket layer initialized
  242. [ 0.317589] Bluetooth: SCO socket layer initialized
  243. [ 0.318278] cfg80211: Calling CRDA to update world regulatory domain
  244. [ 0.318811] Switching to clocksource arch_sys_counter
  245. [ 0.319207] FS-Cache: Loaded
  246. [ 0.319595] CacheFiles: Loaded
  247. [ 0.343265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  248. [ 0.343489] Line:1148:ohci_hcd_mod_init
  249. [ 0.343499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  250. [ 0.343684] line = 483,usb_manager_init
  251. [ 0.343691] [usb_manager]: CONFIG_USB_SW_SUN7I_USB0_OTG
  252. [ 0.343714] WRN:L173(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  253. [ 0.343728] WRN:L182(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  254. [ 0.343742] WRN:L201(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  255. [ 0.343755] WRN:L212(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  256. [ 0.343769] WRN:L224(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  257. [ 0.343783] WRN:L244(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  258. [ 0.343796] WRN:L252(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  259. [ 0.344045] [sw_hcd0]: usb host driver initialize........
  260. [ 0.344380] [sw_udc]: udc_init: version 20080411
  261. [ 0.344436] [sw_udc]: usb_vbase = 0xf1c13000
  262. [ 0.344445] [sw_udc]: sram_vbase = 0xf1c00000
  263. [ 0.344482] [sw_udc]: open_usb_clock
  264. [ 0.364367] udc->driver is null, udc is need not stop
  265. [ 0.365294] NET: Registered protocol family 2
  266. [ 0.365742] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  267. [ 0.367978] TCP established hash table entries: 131072 (order: 8, 1048576 by)
  268. [ 0.372331] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  269. [ 0.373324] TCP: Hash tables configured (established 131072 bind 65536)
  270. [ 0.373336] TCP reno registered
  271. [ 0.373388] UDP hash table entries: 512 (order: 2, 16384 bytes)
  272. [ 0.373448] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  273. [ 0.373935] NET: Registered protocol family 1
  274. [ 0.374534] RPC: Registered named UNIX socket transport module.
  275. [ 0.374545] RPC: Registered udp transport module.
  276. [ 0.374552] RPC: Registered tcp transport module.
  277. [ 0.374560] RPC: Registered tcp NFSv4.1 backchannel transport module.
  278. [ 0.374847] sunxi_reg_init enter
  279. [ 0.375935] [pm]aw_pm_init!
  280. [ 0.375948] dram config [dram_para] [dram_baseaddr] : 1073741824
  281. [ 0.375958] dram config [dram_para] [dram_clk] : 480
  282. [ 0.375966] dram config [dram_para] [dram_type] : 3
  283. [ 0.375975] dram config [dram_para] [dram_rank_num] : -1
  284. [ 0.375984] dram config [dram_para] [dram_chip_density] : -1
  285. [ 0.375993] dram config [dram_para] [dram_io_width] : -1
  286. [ 0.376002] dram config [dram_para] [dram_bus_width] : -1
  287. [ 0.376011] dram config [dram_para] [dram_cas] : 9
  288. [ 0.376019] dram config [dram_para] [dram_zq] : 127
  289. [ 0.376028] dram config [dram_para] [dram_odt_en] : 0
  290. [ 0.376036] dram config [dram_para] [dram_size] : -1
  291. [ 0.376045] dram config [dram_para] [dram_tpr0] : 1121491383
  292. [ 0.376054] dram config [dram_para] [dram_tpr1] : 41104
  293. [ 0.376063] dram config [dram_para] [dram_tpr2] : 141824
  294. [ 0.376072] dram config [dram_para] [dram_tpr3] : 0
  295. [ 0.376080] dram config [dram_para] [dram_tpr4] : 1
  296. [ 0.376089] dram config [dram_para] [dram_tpr5] : 0
  297. [ 0.376097] dram config [dram_para] [dram_emr1] : 4
  298. [ 0.376106] dram config [dram_para] [dram_emr2] : 16
  299. [ 0.376114] dram config [dram_para] [dram_emr3] : 0
  300. [ 0.376124] standby_mode = 0.
  301. [ 0.376131] aw_pm_init: not support super standby.
  302. [ 0.376140] cpu0_en = 0.
  303. [ 0.376147] dram_selfresh_en = 1.
  304. [ 0.376154] wakeup src cnt is : 0.
  305. [ 0.376237] DRAM_STANDBY_PGD_ADDR:d201c000
  306. [ 0.376262] [wifi]: select wifi: rtl8188eu !!
  307. [ 0.376619] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
  308. [ 0.376634] [rtl8188eu]: module power name
  309. [ 0.376642] [rtl8188eu]: rtl8188eu module power set by axp.
  310. [ 0.376655] [rtl8188eu]: get power regulator failed.
  311. [ 0.376682] [wifi_pm]: wifi gpio init is OK !!
  312. [ 0.376876] [powernow inf] module init
  313. [ 0.377070] [powernow inf] create class sw_powernow done
  314. [ 0.378767] highmem bounce pool size: 64 pages
  315. [ 0.382260] NTFS driver 2.1.30 [Flags: R/W].
  316. [ 0.382508] fuse init (API version 7.18)
  317. [ 0.383662] msgmni has been set to 1122
  318. [ 0.385159] io scheduler noop registered
  319. [ 0.385172] io scheduler deadline registered (default)
  320. [ 0.394078] [uart]: driver initializied
  321. [ 0.394551] sw_serial.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a SW
  322. [ 0.394573] [uart]: console setup baud 115200 parity n bits 8, flow n
  323. [ 0.394601] [uart]: uart0 LCR & BAUD changed, reset controller...
  324. [ 1.975185] console [ttyS0] enabled
  325. [ 1.981447] G2D: drv_g2d_init
  326. [ 1.984953] G2D: Module initialized.major:252
  327. [ 1.990648] sunmm_probe, line 269
  328. [ 2.000844] loop: module loaded
  329. [ 2.005903] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  330. [ 2.013784] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  331. [ 2.020010] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 ime
  332. [ 2.029650] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part
  333. [ 2.038376] dma_alloc_coherent mem = 0xffde0000, size = 0x16500, mem_dma=0x40
  334. [ 2.048106] scsi0 : sw_ahci_platform
  335. [ 2.053159] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x8
  336. [ 2.064310] tun: Universal TUN/TAP device driver, 1.6
  337. [ 2.069999] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  338. [ 2.077302] [sunxi_emac]: Init wemac Ethernet Driver, V3.00
  339. [ 2.085150] PPP generic driver version 2.4.2
  340. [ 2.090489] PPP BSD Compression module registered
  341. [ 2.095757] PPP Deflate Compression module registered
  342. [ 2.102409] PPP MPPE Compression module registered
  343. [ 2.107783] NET: Registered protocol family 24
  344. [ 2.112962] PPTP driver version 0.8.5
  345. [ 2.118388] usbcore: registered new interface driver rtl8150
  346. [ 2.125016] usbcore: registered new interface driver asix
  347. [ 2.131462] usbcore: registered new interface driver qf9700
  348. [ 2.137887] usbcore: registered new interface driver cdc_ether
  349. [ 2.144723] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
  350. [ 2.153115] [sw_hci_sun4i_init 1254]
  351. [ 2.157125] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(restrictd
  352. [ 2.166811] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(restrictd
  353. [ 2.176460] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(restrictd
  354. [ 2.186050] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(restrictd
  355. [ 2.195980] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0x0
  356. [ 2.204719] [sw-ehci1]: open clock
  357. [ 2.228386] [sw-ehci1]: open clock, 0x60(0x202c143), 0xcc(0x103)
  358. [ 2.235124] [sw-ehci1]: Set USB Power ON
  359. [ 2.239526] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  360. [ 2.247923] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  361. [ 2.255937] sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
  362. [ 2.261924] [ehci_run 736]
  363. [ 2.278874] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  364. [ 2.285835] hub 1-0:1.0: USB hub found
  365. [ 2.290072] hub 1-0:1.0: 1 port detected
  366. [ 2.295168] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0x4
  367. [ 2.303901] [sw-ohci1]: open clock
  368. [ 2.327566] [sw-ohci1]: open clock, 0x60(0x202c147), 0xcc(0x163)
  369. [ 2.334358] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c147
  370. [ 2.340806] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  371. [ 2.348812] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  372. [ 2.356762] sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
  373. [ 2.408897] ata1: SATA link down (SStatus 0 SControl 300)
  374. [ 2.423747] hub 2-0:1.0: USB hub found
  375. [ 2.427961] hub 2-0:1.0: 1 port detected
  376. [ 2.433089] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0x8
  377. [ 2.441821] [sw-ehci2]: open clock
  378. [ 2.465485] [sw-ehci2]: open clock, 0x60(0x202c14f), 0xcc(0x167)
  379. [ 2.472224] [sw-ehci2]: Set USB Power ON
  380. [ 2.476617] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  381. [ 2.485031] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  382. [ 2.493088] sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
  383. [ 2.499059] [ehci_run 736]
  384. [ 2.518874] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  385. [ 2.525788] hub 3-0:1.0: USB hub found
  386. [ 2.530095] hub 3-0:1.0: 1 port detected
  387. [ 2.535181] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc
  388. [ 2.543914] [sw-ohci2]: open clock
  389. [ 2.567583] [sw-ohci2]: open clock, 0x60(0x202c15f), 0xcc(0x1e7)
  390. [ 2.574346] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c15f
  391. [ 2.580800] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  392. [ 2.588808] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  393. [ 2.596780] sw-ohci sw-ohci.2: irq 97, io mem 0xf1c1c400
  394. [ 2.663745] hub 4-0:1.0: USB hub found
  395. [ 2.667959] hub 4-0:1.0: 1 port detected
  396. [ 2.673188] usbcore: registered new interface driver cdc_acm
  397. [ 2.679574] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
  398. [ 2.688537] Initializing USB Mass Storage driver...
  399. [ 2.694311] usbcore: registered new interface driver usb-storage
  400. [ 2.701079] USB Mass Storage support registered.
  401. [ 2.706680] usbcore: registered new interface driver usbserial
  402. [ 2.713259] usbserial: USB Serial Driver core
  403. [ 2.718318] USB Serial support registered for GSM modem (1-port)
  404. [ 2.725489] usbcore: registered new interface driver option
  405. [ 2.731782] option: v0.7.2:USB Driver for GSM modems
  406. [ 2.737856] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  407. [ 2.745301] [sw_udc]: alloc request: ep(0xc075c0f0, ep0, 64), req(0xef125240)
  408. [ 2.753346] [sw_udc]: sw_udc_pullup, is_on = 0
  409. [ 2.758326] [sw_udc]: usbd_stop_work
  410. [ 2.765801] android_usb gadget: Mass Storage Function, version: 2009/09/11
  411. [ 2.773611] android_usb gadget: Number of LUNs=3
  412. [ 2.778782] lun0: LUN: removable file: (no medium)
  413. [ 2.784334] lun1: LUN: removable file: (no medium)
  414. [ 2.789921] lun2: LUN: removable file: (no medium)
  415. [ 2.796082] android_usb gadget: android_usb ready
  416. [ 2.802116] mousedev: PS/2 mouse device common for all mice
  417. [ 2.808730] input: sw-keyboard as /devices/virtual/input/input0
  418. [ 2.816249] input: sun7i-ir as /devices/virtual/input/input1
  419. [ 2.823297] uinput result 0 , vmouse_init
  420. [ 2.828311] input: vmouse as /devices/virtual/input/input2
  421. [ 2.835742] =====ctp_fetch_sysconfig_para=====.
  422. [ 2.840947] ctp_fetch_sysconfig_para: ctp_unused.
  423. [ 2.846308] ctp_init: ctp_fetch_sysconfig_para err.
  424. [ 2.852380] sunxi_rtc_init: enter
  425. [ 2.856420] rtc_hw_init(400): start
  426. [ 2.860477] rtc_hw_init(416) err: set clksrc to external losc failed! rtc tig
  427. [ 2.869946] rtc_hw_init(431): end
  428. [ 2.873714] sunxi_rtc_gettime(34): err, losc_err_flag is 1
  429. [ 2.880475] using rtc device, rtc, for alarms
  430. [ 2.885203] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  431. [ 2.892539] i2c /dev entries driver
  432. [ 2.897830] lirc_dev: IR Remote Control driver registered, major 249
  433. [ 2.905103] IR NEC protocol handler initialized
  434. [ 2.910188] IR RC5(x) protocol handler initialized
  435. [ 2.915549] IR RC6 protocol handler initialized
  436. [ 2.920735] IR JVC protocol handler initialized
  437. [ 2.925808] IR Sony protocol handler initialized
  438. [ 2.931000] IR RC5 (streamzap) protocol handler initialized
  439. [ 2.937238] IR SANYO protocol handler initialized
  440. [ 2.942513] IR MCE Keyboard/mouse protocol handler initialized
  441. [ 2.949065] IR LIRC bridge handler initialized
  442. [ 2.954029] Linux video capture interface: v2.00
  443. [ 2.959592] [hx-cedar dev]: install start!!!
  444. [ 2.965436] [cedar dev]: install end!!!
  445. [ 2.970192] input: axp20-supplyer as /devices/platform/sun7i-i2c.0/i2c-0/0-03
  446. [ 2.991795] pmu_pekoff_time = 6000
  447. [ 2.995606] pmu_pekoff_en = 1
  448. [ 2.998940] pmu_peklong_time = 1500
  449. [ 3.002843] pmu_pekon_time = 1000
  450. [ 3.006549] pmu_pwrok_time = 64
  451. [ 3.010124] pmu_pwrnoe_time = 2000
  452. [ 3.013931] pmu_intotp_en = 1
  453. [ 3.017858] [AXP]POWER20_OFF_CTL:2070-->0x42
  454. [ 3.023249] POWER20_PEK_SET:2087-->0x9d
  455. [ 3.028137] POWER20_PEK_SET:2098-->0x9d
  456. [ 3.033042] POWER20_PEK_SET:2107-->0x9d
  457. [ 3.037928] POWER20_PEK_SET:2118-->0x9d
  458. [ 3.042839] POWER20_PEK_SET:2130-->0x9d
  459. [ 3.047725] POWER20_HOTOVER_CTL:2139-->0xad
  460. [ 3.056988] [AXP]last_rest_vol = 0, now_rest_vol = 100
  461. [ 3.063777] [AXP]charger->rest_vol = 100
  462. [ 3.071557] create_regulator: axp20_ldo2: Failed to create debugfs directory
  463. [ 3.079516] regulator_virtual_consumer_probe:get regulator:axp20_analog/fm ok
  464. [ 3.087848] regulator_virtual_consumer_probe:get regulator:axp20_pll ok
  465. [ 3.095602] regulator_virtual_consumer_probe:get regulator:axp20_hdmi ok
  466. [ 3.103442] create_regulator: axp20_buck2: Failed to create debugfs directory
  467. [ 3.111484] regulator_virtual_consumer_probe:get regulator:axp20_core ok
  468. [ 3.119311] regulator_virtual_consumer_probe:get regulator:axp20_ddr ok
  469. [ 3.127036] regulator_virtual_consumer_probe:get regulator:axp20_mic ok
  470. [ 3.135476] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-m
  471. [ 3.145364] device-mapper: multipath: version 1.3.0 loaded
  472. [ 3.151636] device-mapper: multipath round-robin: version 1.0.0 loaded
  473. [ 3.159001] device-mapper: multipath queue-length: version 0.1.0 loaded
  474. [ 3.166411] device-mapper: multipath service-time: version 0.2.0 loaded
  475. [ 3.174078] Bluetooth: HCI UART driver ver 2.2
  476. [ 3.179074] Bluetooth: HCI H4 protocol initialized
  477. [ 3.184435] Bluetooth: HCI BCSP protocol initialized
  478. [ 3.190013] Bluetooth: HCILL protocol initialized
  479. [ 3.195279] Bluetooth: HCIATH3K protocol initialized
  480. [ 3.200880] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  481. [ 3.207075] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
  482. [ 3.207083]
  483. [ 3.216120] [gpio-err] __pio_to_irq: invalid pio to irq
  484. [ 3.222909] [fantasy] err get cpu normal frequency from sysconfig failed
  485. [ 3.230651] [mmc-msg] sw_mci_init
  486. [ 3.234397] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  487. [ 3.243210] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  488. [ 3.254443] [mmc-msg] sdc0 Probe: base:0xf003e000 irq:64 sg_cpu:ffdf7000(4fc.
  489. [ 3.264219] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  490. [ 3.275513] [mmc-msg] sdc3 Probe: base:0xf0094000 irq:67 sg_cpu:ffddf000(4fc.
  491. [ 3.284868] sunxi_leds driver init
  492. [ 3.288693] request gpio187, ret=0
  493. [ 3.292572] trigger_name:
  494. [ 3.295507] request gpio188, ret=0
  495. [ 3.299341] trigger_name:heartbeat
  496. [ 3.303730] Registered led device: green:ph20:led1
  497. [ 3.309333] Registered led device: blue:ph21:led2
  498. [ 3.317973] usbcore: registered new interface driver usbhid
  499. [ 3.324287] usbhid: USB HID core driver
  500. [ 3.329769] ashmem: initialized
  501. [ 3.333584] logger: created 256K log 'log_main'
  502. [ 3.338995] logger: created 256K log 'log_events'
  503. [ 3.344556] logger: created 256K log 'log_radio'
  504. [ 3.350010] logger: created 256K log 'log_system'
  505. [ 3.356666] usbcore: registered new interface driver snd-usb-audio
  506. [ 3.364871] value is 1
  507. [ 3.367829] enter sun7i Audio codec!!!
  508. [ 3.373782] sun7i audio support initialized
  509. [ 3.378676] sun7i Audio codec successfully loaded..
  510. [ 3.387094] asoc: sndhdmi <-> sun7i-hdmiaudio.0 mapping ok
  511. [ 3.394607] [SPDIF]sun7i-spdif cannot find any using configuration for contr!
  512. [ 3.406121] [SPDIF]sun7i_sndspdif cannot find any using configuration for co!
  513. [ 3.416695] [I2S] i2s_select type err!
  514. [ 3.420893] [I2S]sun7i-i2s cannot find any using configuration for controlle!
  515. [ 3.431290] [I2S]sndi2s cannot find any using configuration for controllers,!
  516. [ 3.441217] [I2S] i2s_master type err!
  517. [ 3.445410] [I2S] audio_format type err!
  518. [ 3.449818] [I2S] signal_inversion type err!
  519. [ 3.454583] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  520. [ 3.464703] func:sun7i_pcm_init(line:953)sun7i-pcm.c
  521. [ 3.470256] [PCM] type err!
  522. [ 3.473375] [PCM] i2s_select type err!
  523. [ 3.477555] func:sun7i_pcm_init(line:964)sun7i-pcm.c,pcm_used:-284983396
  524. [ 3.485150] get pcm_para gpio list failed
  525. [ 3.489652] func:sun7i_soc_platform_i2s_init(line:803)sun7i-pcmdma.c
  526. [ 3.497413] func:sndpcm_codec_init(line:181)sndpcm.c
  527. [ 3.502996] [PCM] type err!
  528. [ 3.506112] func:sndpcm_codec_init(line:187)sndpcm.c,pcm_used:0
  529. [ 3.512759] [PCM]sndi2s cannot find any using configuration for controllers,!
  530. [ 3.522352] pcm_used type err
  531. [ 3.525759] [PCM] pcm_master type err!
  532. [ 3.529965] [PCM] audio_format type err!
  533. [ 3.534342] [PCM] signal_inversion type err!
  534. [ 3.539127] func:sun7i_sndpcm_init(line:209)sun7i-sndpcm.c,pcm_used:0
  535. [ 3.546319] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  536. [ 3.556432] ALSA device list:
  537. [ 3.559816] #0: sun7i-CODEC Audio Codec
  538. [ 3.564390] #1: sndhdmi
  539. [ 3.567531] Netfilter messages via NETLINK v0.30.
  540. [ 3.572913] nf_conntrack version 0.5.0 (13202 buckets, 52808 max)
  541. [ 3.580323] ctnetlink v0.93: registering with nfnetlink.
  542. [ 3.586382] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  543. [ 3.594195] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  544. [ 3.601963] xt_time: kernel timezone is -0000
  545. [ 3.606889] IPv4 over IPv4 tunneling driver
  546. [ 3.612713] GRE over IPv4 demultiplexor driver
  547. [ 3.617482] GRE over IPv4 tunneling driver
  548. [ 3.623635] ip_tables: (C) 2000-2006 Netfilter Core Team
  549. [ 3.629860] TCP cubic registered
  550. [ 3.633464] Initializing XFRM netlink socket
  551. [ 3.638681] NET: Registered protocol family 10
  552. [ 3.644988] ip6_tables: (C) 2000-2006 Netfilter Core Team
  553. [ 3.651298] IPv6 over IPv4 tunneling driver
  554. [ 3.658437] NET: Registered protocol family 17
  555. [ 3.663502] NET: Registered protocol family 15
  556. [ 3.668625] Bluetooth: RFCOMM TTY layer initialized
  557. [ 3.674113] Bluetooth: RFCOMM socket layer initialized
  558. [ 3.680013] Bluetooth: RFCOMM ver 1.11
  559. [ 3.684201] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  560. [ 3.690169] Bluetooth: BNEP filters: protocol multicast
  561. [ 3.696008] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  562. [ 3.703003] L2TP core driver, V2.0
  563. [ 3.706828] PPPoL2TP kernel driver, V2.0
  564. [ 3.711276] L2TP IP encapsulation support (L2TPv3)
  565. [ 3.716793] L2TP netlink interface
  566. [ 3.720756] L2TP ethernet pseudowire support (L2TPv3)
  567. [ 3.726396] Registering the dns_resolver key type
  568. [ 3.731745] VFP support v0.3: implementor 41 architecture 2 part 30 variant 4
  569. [ 3.740330] ThumbEE CPU extension supported.
  570. [ 3.745104] [rfkill]: init no bt used in configuration
  571. [ 3.752734] regulator_init_complete: axp20_buck3: incomplete constraints, len
  572. [ 3.761762] regulator_init_complete: axp20_buck2: incomplete constraints, len
  573. [ 3.770772] regulator_init_complete: axp20_ldo4: incomplete constraints, lean
  574. [ 3.779676] regulator_init_complete: axp20_ldo3: incomplete constraints, lean
  575. [ 3.788565] regulator_init_complete: axp20_ldo2: incomplete constraints, lean
  576. [ 3.797469] regulator_init_complete: axp20_ldo1: incomplete constraints, lean
  577. [ 3.806121] sunxi_rtc_gettime(34): err, losc_err_flag is 1
  578. [ 3.812264] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
  579. [ 3.820553] Waiting for root device /dev/mmcblk0p3...
  580. [ 4.243849] [mmc-msg] mmc 0 detect change, present 1
  581. [ 4.748897] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timB
  582. [ 4.758932] [mmc-msg] sdc0 power on
  583. [ 4.778878] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  584. [ 4.861203] [mmc-err] smc 0 err, cmd 52, RTO
  585. [ 4.866899] [mmc-err] smc 0 err, cmd 52, RTO
  586. [ 4.871776] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  587. [ 4.884686] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  588. [ 4.897331] [mmc-err] smc 0 err, cmd 5, RTO
  589. [ 4.902921] [mmc-err] smc 0 err, cmd 5, RTO
  590. [ 4.908509] [mmc-err] smc 0 err, cmd 5, RTO
  591. [ 4.914099] [mmc-err] smc 0 err, cmd 5, RTO
  592. [ 4.919513] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  593. [ 4.930050] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  594. [ 4.942948] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  595. [ 4.982011] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  596. [ 4.992464] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  597. [ 5.058196] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  598. [ 5.068876] mmc0: new high speed SDHC card at address 0007
  599. [ 5.075718] mmcblk0: mmc0:0007 SD04G 3.70 GiB
  600. [ 5.094399] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 >
  601. [ 5.141622] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incoms
  602. [ 5.200650] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incoms
  603. [ 5.289903] EXT4-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fd
  604. [ 5.314514] EXT4-fs (mmcblk0p3): recovery complete
  605. [ 5.319900] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. )
  606. [ 5.329001] VFS: Mounted root (ext4 filesystem) on device 179:3.
  607. [ 5.337546] devtmpfs: mounted
  608. [ 5.341250] Freeing init memory: 196K
  609. [ 5.345411] Failed to execute /init. Attempting defaults...
  610. [ 5.352944] Kernel panic - not syncing: No init found. Try passing init= op.
  611. [ 5.366866] CPU0: stopping
  612. [ 5.369920] [<c00144c4>] (unwind_backtrace+0x0/0xe0) from [<c0012940>] (hand)
  613. [ 5.379567] [<c0012940>] (handle_IPI+0xf8/0x1d8) from [<c0008504>] (gic_hand)
  614. [ 5.389111] [<c0008504>] (gic_handle_irq+0x8c/0x9c) from [<c000d540>] (__irq)
  615. [ 5.398448] Exception stack(0xc0731f70 to 0xc0731fb8)
  616. [ 5.404099] 1f60: 00000003 00000001 c0730
  617. [ 5.413251] 1f80: c0730000 c077ec48 c04fb8b8 c0740b10 4000406a 410fc074 00000
  618. [ 5.422396] 1fa0: 00000000 c0731fb8 c000ead0 c000ead4 60000013 ffffffff
  619. [ 5.429805] [<c000d540>] (__irq_svc+0x40/0x70) from [<c000ead4>] (default_id)
  620. [ 5.438962] [<c000ead4>] (default_idle+0x24/0x28) from [<c000ee3c>] (cpu_idl)
  621. [ 5.448030] [<c000ee3c>] (cpu_idle+0x88/0xe8) from [<c06fe7a4>] (start_kerne)
  622. [ 5.457272] [hotplug]: try to kill cpu:0 failed!
  623. [ 5.462435] Rebooting in 10 seconds..
  624. [ 15.531638] Restarting Linux version 3.3.0 (rolivo@build) (gcc version 4.6.33
  625. [ 15.531652]
  626. [ 15.554204] sun7i_restart: to check
Advertisement
Advertisement
Advertisement
RAW Paste Data Copied
Advertisement