API tools faq
paste
Advertisement
juanjosepablos

dmesg Zyxel P870HNU-51b 6/05/2020

juanjosepablos
May 5th, 2020
41
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.02 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 5.4.38 (cheche@casa) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13138-3a79e3b185)) #0 SMP Tue May 5 11:09:19 2020
  2. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  3. [ 0.000000] CPU frequency is 400 MHz
  4. [ 0.000000] 64MB of RAM installed
  5. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  6. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-107.23
  7. [ 0.000000] printk: bootconsole [early0] enabled
  8. [ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350)
  9. [ 0.000000] board: board name: P870HNU-51b
  10. [ 0.000000] MIPS: machine is Zyxel P870HNU-51b
  11. [ 0.000000] Initrd not found or empty - disabling initrd
  12. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  13. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  14. [ 0.000000] Zone ranges:
  15. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  20. [ 0.000000] On node 0 totalpages: 16384
  21. [ 0.000000] Normal zone: 144 pages used for memmap
  22. [ 0.000000] Normal zone: 0 pages reserved
  23. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  24. [ 0.000000] percpu: Embedded 14 pages/cpu s26032 r8192 d23120 u57344
  25. [ 0.000000] pcpu-alloc: s26032 r8192 d23120 u57344 alloc=14*4096
  26. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  27. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
  28. [ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  29. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  30. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
  31. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  32. [ 0.000000] Memory: 56880K/65536K available (5062K kernel code, 203K rwdata, 1112K rodata, 1296K init, 201K bss, 8656K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  34. [ 0.000000] rcu: Hierarchical RCU implementation.
  35. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  36. [ 0.000000] NR_IRQS: 256
  37. [ 0.000000] genirq: irq_chip bcm6345-periph-intc did not update eff. affinity mask of irq 28
  38. [ 0.000000] random: get_random_bytes called from start_kernel+0x338/0x560 with crng_init=0
  39. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  40. [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  41. [ 0.008135] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  42. [ 0.046453] pid_max: default: 32768 minimum: 301
  43. [ 0.051539] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  44. [ 0.059082] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  45. [ 0.072188] rcu: Hierarchical SRCU implementation.
  46. [ 0.078387] smp: Bringing up secondary CPUs ...
  47. [ 0.084694] SMP: Booting CPU1...
  48. [ 8.768771] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  49. [ 8.768788] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  50. [ 8.769045] CPU1 revision is: 0002a031 (Broadcom BMIPS4350)
  51. [ 0.116178] Synchronize counters for CPU 1:
  52. [ 0.116198] SMP: CPU1 is running
  53. [ 0.116219] done.
  54. [ 0.146728] smp: Brought up 1 node, 2 CPUs
  55. [ 0.158936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  56. [ 0.168997] futex hash table entries: 512 (order: 1, 8192 bytes, linear)
  57. [ 0.176190] pinctrl core: initialized pinctrl subsystem
  58. [ 0.182599] NET: Registered protocol family 16
  59. [ 0.208996] registering PCI controller with io_map_base unset
  60. [ 0.261878] PCI host bridge to bus 0000:00
  61. [ 0.266142] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  62. [ 0.273198] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  63. [ 0.280086] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  64. [ 0.287083] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  65. [ 0.295390] pci 0000:00:01.0: [14e4:a8d6] type 00 class 0x028000
  66. [ 0.303597] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff]
  67. [ 0.318493] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  68. [ 0.325309] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  69. [ 0.336225] clocksource: Switched to clocksource MIPS
  70. [ 0.345546] b43-pci-bridge 0000:00:01.0: enabling device (0000 -> 0002)
  71. [ 0.381322] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
  72. [ 0.462446] b43-pci-bridge 0000:00:01.0: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  73. [ 0.472854] NET: Registered protocol family 2
  74. [ 0.478796] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  75. [ 0.487405] random: fast init done
  76. [ 0.490984] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  77. [ 0.498901] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  78. [ 0.506222] TCP: Hash tables configured (established 1024 bind 1024)
  79. [ 0.513213] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  80. [ 0.520066] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  81. [ 0.527806] NET: Registered protocol family 1
  82. [ 0.532399] PCI: CLS 0 bytes, default 16
  83. [ 0.539787] workingset: timestamp_bits=14 max_order=14 bucket_order=0
  84. [ 0.572389] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  85. [ 0.578452] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  86. [ 0.597718] bcm6368-pinctrl 10000080.pin-controller: registered at mmio (ptrval)
  87. [ 0.607431] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 10, base_baud = 1562500) is a bcm63xx_uart
  88. [ 0.617184] printk: console [ttyS0] enabled
  89. [ 0.625758] printk: bootconsole [early0] disabled
  90. [ 0.639161] physmap-flash 18000000.nor: physmap platform flash device: [mem 0x18000000-0x19ffffff]
  91. [ 0.648667] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  92. [ 0.659021] 18000000.nor: Found an alias at 0x1000000 for the chip at 0x0
  93. [ 0.659051] Amd/Fujitsu Extended Query Table at 0x0040
  94. [ 0.664354] Amd/Fujitsu Extended Query version 1.3.
  95. [ 0.669518] number of CFI chips: 1
  96. [ 0.673742] Searching for RedBoot partition table in 18000000.nor at offset 0xfe0000
  97. [ 0.715836] No RedBoot partition table detected in 18000000.nor
  98. [ 0.722167] 3 fixed-partitions partitions found on MTD device 18000000.nor
  99. [ 0.729231] Creating 3 MTD partitions on "18000000.nor":
  100. [ 0.734692] 0x000000000000-0x000000020000 : "CFE"
  101. [ 0.742654] 0x000000020000-0x000001000000 : "linux"
  102. [ 0.750901] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type 96368MVWG
  103. [ 0.760348] parser_imagetag: Partition 0 is kernel offset 100 and length 203aa4
  104. [ 0.767858] parser_imagetag: Partition 1 is rootfs offset 203ba4 and length ddc45c
  105. [ 0.775630] parser_imagetag: Spare partition is offset 430004 and length bafffc
  106. [ 0.783244] 2 bcm963xx-imagetag partitions found on MTD device linux
  107. [ 0.789768] Creating 2 MTD partitions on "linux":
  108. [ 0.794605] 0x000000000100-0x000000203ba4 : "kernel"
  109. [ 0.802609] 0x000000203ba4-0x000000fe0000 : "rootfs"
  110. [ 0.810550] mtd: device 3 (rootfs) set to be root filesystem
  111. [ 0.816429] 1 squashfs-split partitions found on MTD device rootfs
  112. [ 0.822776] 0x000000440000-0x000000fe0000 : "rootfs_data"
  113. [ 0.831136] 0x000000fe0000-0x000000ff0000 : "nvram"
  114. [ 0.841855] bcm63xx-spi 10000800.spi: at [mem 0x10000800-0x10000f0b flags 0x200] (irq 9, FIFOs size 542)
  115. [ 0.854919] libphy: Fixed MDIO Bus: probed
  116. [ 0.901856] b53_common: found switch: BCM63xx, rev 0
  117. [ 0.907882] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  118. [ 0.917985] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  119. [ 0.925209] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  120. [ 0.932367] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  121. [ 0.939524] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  122. [ 0.946687] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
  123. [ 0.957820] NET: Registered protocol family 10
  124. [ 0.966267] Segment Routing with IPv6
  125. [ 0.970290] NET: Registered protocol family 17
  126. [ 0.974930] 8021q: 802.1Q VLAN Support v1.8
  127. [ 0.986456] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  128. [ 1.008419] Freeing unused kernel memory: 1296K
  129. [ 1.013062] This architecture does not have kernel memory protection.
  130. [ 1.019675] Run /sbin/init as init process
  131. [ 1.918256] init: Console is alive
  132. [ 1.922170] init: - watchdog -
  133. [ 3.189413] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  134. [ 3.307463] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  135. [ 3.321882] init: - preinit -
  136. [ 4.466395] random: jshn: uninitialized urandom read (4 bytes read)
  137. [ 4.533843] random: jshn: uninitialized urandom read (4 bytes read)
  138. [ 4.725287] random: jshn: uninitialized urandom read (4 bytes read)
  139. [ 5.387691] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  140. [ 5.394590] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
  141. [ 5.394814] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
  142. [ 5.411200] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  143. [ 5.497875] urandom_read: 2 callbacks suppressed
  144. [ 5.497892] random: procd: uninitialized urandom read (4 bytes read)
  145. [ 9.885402] mount_root: no usable overlay filesystem found, using tmpfs overlay
  146. [ 9.934887] urandom-seed: Seed file not found (/etc/urandom.seed)
  147. [ 10.115355] procd: - early -
  148. [ 10.118487] procd: - watchdog -
  149. [ 10.778300] procd: - watchdog -
  150. [ 10.781978] procd: - ubus -
  151. [ 10.832462] random: ubusd: uninitialized urandom read (4 bytes read)
  152. [ 10.931711] random: ubusd: uninitialized urandom read (4 bytes read)
  153. [ 10.938940] random: ubusd: uninitialized urandom read (4 bytes read)
  154. [ 10.947035] procd: - init -
  155. [ 11.838474] kmodloader: loading kernel modules from /etc/modules.d/*
  156. [ 11.981204] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
  157. [ 11.988986] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
  158. [ 12.039788] xt_time: kernel timezone is -0000
  159. [ 12.225740] urngd: v1.0.2 started.
  160. [ 12.303343] PPP generic driver version 2.4.2
  161. [ 12.311199] NET: Registered protocol family 24
  162. [ 12.377744] b43-phy0: Broadcom 43222 WLAN found (core revision 16)
  163. [ 12.428217] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
  164. [ 12.434505] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 6, Version 0
  165. [ 12.457727] Broadcom 43xx driver loaded [ Features: PNL ]
  166. [ 12.476016] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  167. [ 12.488017] kmodloader: done loading kernel modules from /etc/modules.d/*
  168. [ 12.560649] random: crng init done
  169. [ 12.564099] random: 1 urandom warning(s) missed due to ratelimiting
  170. [ 50.421856] jffs2: notice: (1132) jffs2_build_xattr_subsystem: complete building xattr subsystem, 28 of xdatum (6 unchecked, 22 orphan) and 41 of xref (13 dead, 20 orphan) found.
  171. [ 51.585832] overlayfs: upper fs does not support tmpfile.
  172. [ 52.624458] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
  173. [ 52.632591] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
  174. [ 52.652565] br-lan: port 1(eth0.1) entered blocking state
  175. [ 52.658184] br-lan: port 1(eth0.1) entered disabled state
  176. [ 52.664505] device eth0.1 entered promiscuous mode
  177. [ 52.669461] device eth0 entered promiscuous mode
  178. [ 52.682038] br-lan: port 1(eth0.1) entered blocking state
  179. [ 52.687644] br-lan: port 1(eth0.1) entered forwarding state
  180. [ 53.617143] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!