end g code

;======== P2S end gcode ==========
;===== 2026/03/13 =====

;===== detect ABS/ASA ======
{if filament_type[current_extruder] == "ASA" || filament_type[current_extruder] == "ABS"}
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-1.2 F1800 ; retract 1.2mm filament
G91 ; relative positioning
G1 Z30 F900 ; lift 30 mm above current layer
G90 ; back to absolute positioning
G1 X128 Y128 F12000 ; move nozzle to middle of bed
M104 S200 ; drop nozzle temp to 200°C immediately
M106 P2 S0 ; set fan to 0%
M140 S100 ; set bed temp
M400 S300 ; pause for 300 seconds
M140 S95 ; set bed temp
M104 S190 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S90 ; set bed temp
M104 S180 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S85 ; set bed temp
M104 S170 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S80 ; set bed temp
M104 S160 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S75 ; set bed temp
M104 S150 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S70 ; set bed temp
M104 S140 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S65 ; set bed temp
M104 S130 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S60 ; set bed temp
M104 S120 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S55 ; set bed temp
M104 S110 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S50 ; set bed temp
M104 S100 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S45 ; set bed temp
M104 S90 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S40 ; set bed temp
M104 S80 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S35 ; set bed temp
M104 S70 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S30 ; set bed temp
M104 S60 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S20 ; set bed temp
M104 S40 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S15 ; set bed temp
M104 S30 ; set nozzle temp
M400 S300 ; pause for 300 seconds
M140 S0 ; turn off bed
M104 S0 ; turn off nozzle
{endif}


M400 ; wait for buffer to clear
G92 E0 ; zero the extruder

; pull back filament to AMS
M620 S65535
T65535
G150.2
M621 S65535

G150.3

M400 ; wait all motion done

M1002 judge_flag timelapse_record_flag
M622 J1
    M991 S0 P-1 ;end smooth timelapse at safe pos
    M400 S5 ;wait for last picture to be taken
M623  ;end of "timelapse_record_flag"

M104 S0 ; turn off hotend
M140 S0 ; turn off bed
M106 S0 ; turn off fan
M106 P2 S0 ; turn off remote part cooling fan
M106 P3 S0 ; turn off chamber cooling fan
M106 P10 S0 ; turn off left aux fan

M400 ; wait all motion done
M17 S
M17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom
{if (80.0 - max_layer_z/2) > 0}
    {if (max_layer_z + 80.0 - max_layer_z/2) < 256}
        G1 Z{max_layer_z + 80.0 - max_layer_z/2} F600
        G1 Z{max_layer_z + 78.0 - max_layer_z/2}
    {else}
        G1 Z256 F600
        G1 Z256
    {endif}
{else}
    {if (max_layer_z + 4.0) < 256}
        G1 Z{max_layer_z + 4.0} F600
        G1 Z{max_layer_z + 2.0}
    {else}
        G1 Z256 F600
        G1 Z256
    {endif}
{endif}
M400 P100
M17 R ; restore z current


M220 S100  ; Reset feedrate magnitude
M201.2 K1.0 ; Reset acc magnitude
M73.2 R1.0 ;Reset left time magnitude
M1002 set_gcode_claim_speed_level : 0

M1015.3 S0 ;disable clog detect
M1015.4 S0 K0 ;disable air printing detect

;=====printer finish air purification=========
M622.1 S0
M1002 judge_flag print_finish_air_filt_flag

M622 J1
M1002 gcode_claim_action : 66
M145 P1
M106 P2 S255
M400 S180
M106 P2 S0
M623

M622 J2
M1002 gcode_claim_action : 66
M145 P0
M106 P3 S255
M400 S180
M106 P3 S0
M623
;=====printer finish air purification=========

;=====printer finish  sound=========
M17
M400 S1
M1006 S1
M1006 A53 B10 L50 C53 D10 M50 E53 F10 N50
M1006 A57 B10 L50 C57 D10 M50 E57 F10 N50
M1006 A0 B15 L0 C0 D15 M0 E0 F15 N0
M1006 A53 B10 L50 C53 D10 M50 E53 F10 N50
M1006 A57 B10 L50 C57 D10 M50 E57 F10 N50
M1006 A0 B15 L0 C0 D15 M0 E0 F15 N0
M1006 A48 B10 L50 C48 D10 M50 E48 F10 N50
M1006 A0 B15 L0 C0 D15 M0 E0 F15 N0
M1006 A60 B10 L50 C60 D10 M50 E60 F10 N50
M1006 W
;=====printer finish  sound=========
M400
M18