Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # WEEWX CONFIGURATION FILE
- #
- # Copyright (c) 2009-2015 Tom Keffer <tkeffer@gmail.com>
- # See the file LICENSE.txt for your rights.
- ##############################################################################
- # This section is for general configuration information.
- # Set to 1 for extra debug info, otherwise comment it out or set to zero
- debug = 0
- # Root directory of the weewx data file hierarchy for this station
- WEEWX_ROOT = /
- # How long to wait before timing out a socket (FTP, HTTP) connection
- socket_timeout = 20
- # Do not modify this. It is used when installing and updating weewx.
- version = 3.7.0
- ##############################################################################
- # This section is for information about the station.
- [Station]
- # Description of the station location
- location = "Papagos, Attiki, Greece"
- # Latitude and longitude in decimal degrees
- latitude = 37.986681
- longitude = 23.791474
- # Altitude of the station, with unit it is in. This is downloaded from
- # from the station if the hardware supports it.
- altitude = 219, meter # Choose 'foot' or 'meter' for unit
- # Set to type of station hardware. There must be a corresponding stanza
- # in this file with a 'driver' parameter indicating the driver to be used.
- station_type = FineOffsetUSB
- # If you have a website, you may specify an URL
- station_url = http://tweety.noip.me/wx
- # The start of the rain year (1=January; 10=October, etc.). This is
- # downloaded from the station if the hardware supports it.
- rain_year_start = 10
- # Start of week (0=Monday, 6=Sunday)
- week_start = 0
- ##############################################################################
- [FineOffsetUSB]
- # This section is for the Fine Offset series of weather stations.
- polling_mode = PERIODIC
- # The station model, e.g., WH1080, WS1090, WS2080, WH3081
- model = WS2080
- # How often to poll the station for data, in seconds
- polling_interval = 60
- # The driver to use:
- driver = weewx.drivers.fousb
- ##############################################################################
- [Simulator]
- # This section is for the weewx weather station simulator
- # The time (in seconds) between LOOP packets.
- loop_interval = 2.5
- # The simulator mode can be either 'simulator' or 'generator'.
- # Real-time simulator. Sleep between each LOOP packet.
- mode = simulator
- # Generator. Emit LOOP packets as fast as possible (useful for testing).
- #mode = generator
- # The start time. If not specified, the default is to use the present time.
- #start = 2011-01-01 00:00
- # The driver to use:
- driver = weewx.drivers.simulator
- ##############################################################################
- # This section is for uploading data to Internet sites
- [StdRESTful]
- [[StationRegistry]]
- # To register this weather station with weewx, set this to true
- register_this_station = true
- [[AWEKAS]]
- # This section is for configuring posts to AWEKAS.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a username and password.
- enable = false
- username = replace_me
- # To guard against parsing errors, put your password in quotes:
- password = replace_me
- [[CWOP]]
- # This section is for configuring posts to CWOP.
- # If you wish to do this, set the option 'enable' to true,
- # and specify the station ID (e.g., CW1234).
- enable = false
- station = replace_me
- # If this is an APRS (radio amateur) station, uncomment
- # the following and replace with a passcode (e.g., 12345).
- #passcode = replace_me (APRS stations only)
- [[PWSweather]]
- # This section is for configuring posts to PWSweather.com.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station and password.
- enable = false
- station = replace_me
- # To guard against parsing errors, put your password in quotes:
- password = replace_me
- [[WOW]]
- # This section is for configuring posts to WOW.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station and password.
- enable = false
- station = replace_me
- # To guard against parsing errors, put your password in quotes:
- password = replace_me
- [[Wunderground]]
- # This section is for configuring posts to the Weather Underground.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station (e.g., 'KORHOODR3') and password.
- enable = true
- station = IPAPAGOS4
- # To guard against parsing errors, put your password in quotes:
- password = *****
- # Set the following to True to have weewx use the WU "Rapidfire"
- # protocol. Not all hardware can support it. See the User's Guide.
- rapidfire = False
- ##############################################################################
- # This section specifies what reports, using which skins, to generate.
- [StdReport]
- # Where the skins reside, relative to WEEWX_ROOT
- SKIN_ROOT = /etc/weewx/skins
- # Where the generated reports should go, relative to WEEWX_ROOT
- HTML_ROOT = /mnt/services/www/html/weewx
- # The database binding indicates which data should be used in reports.
- data_binding = wx_binding
- # Each of the following subsections defines a report that will be run.
- [[StandardReport]]
- # See the customizing guide to change the units, plot types and line
- # colors, modify the fonts, display additional sensor data, and other
- # customizations. Many of those changes can be made here by overriding
- # parameters, or by modifying templates within the skin itself.
- # The StandardReport uses the 'Standard' skin, which contains the
- # images, templates and plots for the report.
- skin = Standard
- [[MetricReport]]
- skin = Standard
- # Override the options that were not in metric units
- [[[Units]]]
- [[[[Groups]]]]
- group_altitude = meter
- group_pressure = mbar
- group_rain = mm
- group_rainrate = mm_per_hour
- group_speed = meter_per_second
- group_speed2 = meter_per_second2
- group_temperature = degree_C
- [[[TimeFormats]]]
- #
- # This section sets the string format to be used
- # each time scale.
- #
- day = %H:%M
- week = %H:%M on %A
- month = %d-%b-%Y %H:%M
- year = %d-%b-%Y %H:%M
- rainyear = %d-%b-%Y %H:%M
- current = %B-%d-%Y %H:%M
- ephem_day = %H:%M
- ephem_year = %d-%b-%Y %H:%M
- # This report will use US Customary Units
- [[USReport]]
- # It is based on the Standard skin
- skin = Standard
- # Override where the results will go and put them in a directory:
- HTML_ROOT = /mnt/services/www/html/weewx/us
- # [[FTP]]
- # FTP'ing the results to a webserver is treated as just another report,
- # albeit one with an unusual report generator!
- # skin = Ftp
- # If you wish to use FTP, uncomment and fill out the next four lines.
- #user = replace with the ftp username
- #password = replace with the ftp password; put in quotes to guard against parsing errors.
- #server = replace with the ftp server name, e.g, www.threefools.org
- #path = replace with the ftp destination directory (e.g., /weather)
- # Set to True for an FTP over TLS (FTPS) connection. Not all servers
- # support this.
- # secure_ftp = False
- # To upload files from something other than what HTML_ROOT is set
- # to above, specify a different HTML_ROOT here.
- #HTML_ROOT = /var/www/html/weewx
- # Most FTP servers use port 21
- # port = 21
- # Set to 1 to use passive mode, zero for active mode
- # passive = 1
- # [[RSYNC]]
- # rsync'ing to a webserver is treated as just another report
- # skin = Rsync
- # If you wish to use rsync, you must configure passwordless ssh using
- # public/private key authentication from the user account that weewx
- # runs as to the user account on the remote machine where the files
- # will be copied.
- #
- # The following three lines determine where files will be sent.
- #server = replace with the rsync server name, e.g, www.threefools.org
- #path = replace with the rsync destination directory (e.g., /weather)
- #user = replace with the rsync username
- # Rsync can be configured to remove files from the remote server if
- # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
- # make a mistake in the remote path, you could could unintentionally
- # cause unrelated files to be deleted. Set to 1 to enable remote file
- # deletion, zero to allow files to accumulate remotely.
- # delete = 0
- ##############################################################################
- # This service acts as a filter, converting the unit system coming from
- # the hardware to a unit system in the database.
- [StdConvert]
- # The target_unit affects only the unit system in the database. Once
- # chosen it cannot be changed without converting the entire database.
- # Modification of target_unit after starting weewx will result in
- # corrupt data - the database will contain a mix of US and METRIC data.
- #
- # The value of target_unit does not affect the unit system for
- # reporting - reports can display US, Metric, or any combination of units.
- #
- # In most cases, target_unit should be left as the default: US
- #
- # In particular, those migrating from a standard wview installation
- # should use US since that is what the wview database contains.
- # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
- target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
- ##############################################################################
- # This section can adjust data using calibration expressions.
- [StdCalibrate]
- [[Corrections]]
- # For each type, an arbitrary calibration expression can be given.
- # It should be in the units defined in the StdConvert section.
- # Example:
- foo = foo + 0.2
- ##############################################################################
- # This section is for quality control checks. If units are not specified,
- # values must be in the units defined in the StdConvert section.
- [StdQC]
- [[MinMax]]
- barometer = 26, 32.5, inHg
- outTemp = -40, 120, degree_F
- inTemp = 10, 120, degree_F
- outHumidity = 0, 100
- inHumidity = 0, 100
- windSpeed = 0, 120, mile_per_hour
- pressure = 24, 34.5, inHg
- ##############################################################################
- # This section controls the origin of derived values.
- [StdWXCalculate]
- [[Calculations]]
- # Derived quantities are calculated by this service. Possible values are:
- # hardware - use the value provided by hardware
- # software - use the value calculated by weewx
- # prefer_hardware - use value provide by hardware if available,
- # otherwise use value calculated by weewx
- pressure = prefer_hardware
- barometer = prefer_hardware
- altimeter = prefer_hardware
- windchill = prefer_hardware
- heatindex = prefer_hardware
- dewpoint = prefer_hardware
- inDewpoint = prefer_hardware
- rainRate = prefer_hardware
- ##############################################################################
- # For hardware that supports it, this section controls how often the
- # onboard clock gets updated.
- [StdTimeSynch]
- # How often to check the weather station clock for drift (in seconds)
- clock_check = 14400
- # How much it can drift before we will correct it (in seconds)
- max_drift = 5
- ##############################################################################
- # This section is for configuring the archive service.
- [StdArchive]
- # If the station hardware supports data logging then the archive interval
- # will be downloaded from the station. Otherwise, specify it (in seconds).
- archive_interval = 300
- # If possible, new archive records are downloaded from the station
- # hardware. If the hardware does not support this, then new archive
- # records will be generated in software.
- # Set the following to "software" to force software record generation.
- record_generation = software
- # Whether to include LOOP data in hi/low statistics
- loop_hilo = True
- # The data binding used to save archive records
- data_binding = wx_binding
- ##############################################################################
- # This section binds a data store to a database.
- [DataBindings]
- [[wx_binding]]
- # The database must match one of the sections in [Databases].
- # This is likely to be the only option you would want to change.
- database = archive_mysql
- # The name of the table within the database
- table_name = archive
- # The manager handles aggregation of data for historical summaries
- manager = weewx.wxmanager.WXDaySummaryManager
- # The schema defines the structure of the database.
- # It is *only* used when the database is created.
- schema = schemas.wview.schema
- ##############################################################################
- # This section defines various databases.
- [Databases]
- # A SQLite database is simply a single file
- [[archive_sqlite]]
- database_type = SQLite
- database_name = weewx.sdb
- # MySQL
- [[archive_mysql]]
- database_type = MySQL
- database_name = weewx
- ##############################################################################
- # This section defines defaults for the different types of databases.
- [DatabaseTypes]
- # Defaults for SQLite databases
- [[SQLite]]
- driver = weedb.sqlite
- # Directory in which the database files are located
- SQLITE_ROOT = /var/lib/weewx
- # Defaults for MySQL databases
- [[MySQL]]
- driver = weedb.mysql
- # The host where the database is located
- host = 127.0.0.1
- # The user name for logging in to the host
- user = weewx
- # The password for the user name. Put in quotes to guard against parsing errors.
- password = *****
- ##############################################################################
- # This section configures the internal weewx engine.
- [Engine]
- [[Services]]
- # This section specifies the services that should be run. They are
- # grouped by type, and the order of services within each group
- # determines the order in which the services will be run.
- prep_services = weewx.engine.StdTimeSynch
- data_services = ,
- process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
- archive_services = weewx.engine.StdArchive
- restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
- report_services = weewx.engine.StdPrint, weewx.engine.StdReport
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement