API tools faq
paste
Advertisement
Astralix

Xelio 10pro recovery only

Astralix
Aug 27th, 2013
158
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.92 KB | None | 0 0
raw download clone embed print report
  1. acc
  2. ok
  3. bus width=32 col=10 bank=8 row=15 CS=1
  4. size=1024MB
  5. ok OUT
  6. BUILD=====4
  7. GetRemapTbl flag = 0
  8. OK! 56168
  9. unsigned!
  10. SecureBootEn = 0
  11. Boot ver: 2012-11-13#1.20
  12. default RECOVERY key is pressed
  13. RECOVERY key is pressed
  14. Start RockUsb...
  15. GetRemapTbl flag = 1
  16. 1904798 UsbConnected
  17. DDR Version 1.00 20120529
  18. In
  19. DDR3
  20. freq
  21. 300MHz
  22. config state
  23. pctl
  24. phy
  25. mem
  26.  
  27. DX0DQSTR:3DB04001
  28. DX1DQSTR:3DB04001
  29. DX2DQSTR:3DB04001
  30. DX3DQSTR:3DB04001
  31. acc
  32. ok
  33. bus width=32 col=10 bank=8 row=15 CS=1
  34. size=1024MB
  35. ok OUT
  36. BUILD=====4
  37. GetRemapTbl flag = 0
  38. OK! 55627
  39. unsigned!
  40. SecureBootEn = 0
  41. Boot ver: 2012-11-13#1.20
  42. start_linux=====67061
  43. 1510251 Starting kernel...@0x60408000
  44.  
  45. [ 0.000000] Initializing cgroup subsys cpu
  46. [ 0.000000] Linux version 3.0.8+ (EM3066-101C@V03) (gcc version 4.4.3 (GCC) ) #388 SMP PREEMPT Mon Mar 25 18:08:32 CST 2013
  47. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
  48. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  49. [ 0.000000] Machine: RK30board
  50. [ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
  51. [ 0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0>
  52. [ 0.000000] memory reserve: Memory(base:0x90000000 size:12M) reserved for <ipp buf>
  53. [ 0.000000] memory reserve: Memory(base:0x8f400000 size:12M) reserved for <fb2>
  54. [ 0.000000] memory reserve: Memory(base:0x8ee00000 size:6M) reserved for <camera_ipp_mem>
  55. [ 0.000000] memory reserve: Total reserved 122M
  56. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  57. [ 0.000000] bootconsole [earlycon0] enabled
  58. [ 0.000000] CPU SRAM: copied sram code from c0b16000 to fef00100 - fef01ad0
  59. [ 0.000000] CPU SRAM: copied sram data from c0b179d0 to fef03000 - fef0382c
  60. [ 0.000000] L310 cache controller enabled
  61. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  62. [ 0.000000] DDR DEBUG: version 1.00 20121016
  63. [ 0.000000] DDR DEBUG: DDR3 Device
  64. [ 0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
  65. [ 0.000000] DDR DEBUG: init success!!! freq=372MHz
  66. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  67. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  68. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  69. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  70. [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  71. [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  72. [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  73. [ 0.000000] rk30_iomux_init
  74. [ 0.000000] Boot mode: 2 flag: 0xc3524203
  75. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1da4000 s7072 r8192 d13408 u32768
  76. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 228864
  77. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00200000 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x000C0000@0x00018000(backup),0x00040000@0x000D8000(cache),0x00500000@0x00118000(userdata),0x00002000@0x00618000(kpanic),0x00140000@0x0061A000(system),-@0x0075A000(user) bootver=2012-11-13#1.20 firmware_ver=4.2.2
  78. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  79. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  80. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  81. [ 0.000000] Memory: 750MB 152MB = 902MB total
  82. [ 0.000000] Memory: 894488k/894488k available, 154088k reserved, 155648K highmem
  83. [ 0.000000] Virtual kernel memory layout:
  84. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  85. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  86. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  87. [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
  88. [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
  89. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  90. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  91. [ 0.000000] .init : 0xc0408000 - 0xc0528000 (1152 kB)
  92. [ 0.000000] .text : 0xc0528000 - 0xc0ab51d4 (5685 kB)
  93. [ 0.000000] .data : 0xc0ab6000 - 0xc0b15f00 ( 384 kB)
  94. [ 0.000000] .bss : 0xc0b19024 - 0xc159b2f8 (10761 kB)
  95. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  96. [ 0.000000] Preemptible hierarchical RCU implementation.
  97. [ 0.000000] NR_IRQS:416
  98. [ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
  99. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  100. [ 0.000000] Console: colour dummy device 80x30
  101. [ 0.004923] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  102. [ 0.013783] pid_max: default: 32768 minimum: 301
  103. [ 0.018996] Mount-cache hash table entries: 512
  104. [ 0.024496] Initializing cgroup subsys debug
  105. [ 0.029101] Initializing cgroup subsys cpuacct
  106. [ 0.034019] Initializing cgroup subsys freezer
  107. [ 0.038868] CPU: Testing write buffer coherency: ok
  108. [ 0.144862] CPU1: Booted secondary processor
  109. [ 0.144900] Brought up 2 CPUs
  110. [ 0.152775] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
  111. [ 0.159959] devtmpfs: initialized
  112. [ 0.171023] NET: Registered protocol family 16
  113. [ 0.175905] last_log: 0xee900000 0xc0b1d230
  114. [ 0.282735] rk29sdk_wifi_bt_gpio_control_init: init finished
  115. <hit enter to activate fiq debugger>
  116. [ 0.293295] console [ttyFIQ0] enabled, bootconsole disabled
  117. [ 0.293295] console [ttyFIQ0] enabled, bootconsole disabled
  118. [ 0.299451] Registered FIQ tty driver ee88fc00
  119. [ 0.311536] bio: create slab <bio-0> at 0
  120. [ 0.315848] pwm_regulator.0: driver initialized
  121. [ 0.315975] pwm_regulator.1: driver initialized
  122. [ 0.316266] SCSI subsystem initialized
  123. [ 0.316459] usbcore: registered new interface driver usbfs
  124. [ 0.316536] usbcore: registered new interface driver hub
  125. [ 0.339420] usbcore: registered new device driver usb
  126. [ 0.339753] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  127. [ 0.339919] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  128. [ 0.340078] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  129. [ 0.340194] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
  130. [ 0.340302] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
  131. [ 0.370971] rk30-adc rk30-adc: rk30 adc: driver initialized
  132. [ 0.371037] rk29_adc_battery_init
  133. [ 0.371069] rk29_adc_battery_probe--1691:
  134. [ 0.371169] rk29_adc_battery_lowpower_check--1563:
  135. [ 0.387039] rk29_adc_battery: driver initialized
  136. [ 0.387261] Advanced Linux Sound Architecture Driver Version 1.0.24.
  137. [ 0.387646] Bluetooth: Core ver 2.16
  138. [ 0.387697] NET: Registered protocol family 31
  139. [ 0.387709] Bluetooth: HCI device and connection manager initialized
  140. [ 0.387725] Bluetooth: HCI socket layer initialized
  141. [ 0.387737] Bluetooth: L2CAP socket layer initialized
  142. [ 0.387779] Bluetooth: SCO socket layer initialized
  143. [ 0.388731] cfg80211: Calling CRDA to update world regulatory domain
  144. [ 0.435067] rk fb probe ok!
  145. [ 0.435142] Switching to clocksource timer1
  146. [ 0.435345] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf701c000
  147. [ 0.435538] lcdc0: dclk:72545454>>fps:60 rk30_load_screen for lcdc0 ok!
  148. [ 0.444345] Switched to NOHz mode on CPU #0
  149. [ 0.444927] Switched to NOHz mode on CPU #1
  150. [ 0.456869] fb0:phy:90c00000>>vir:f8000000>>len:0xc00000
  151. [ 0.457037] rk_fb_register>>>>>fb0
  152. [ 0.457189] rk_fb_register>>>>>fb1
  153. [ 0.457202] lcdc0 wakeup from stanby
  154. [ 0.457212] lcdc0 win1 open
  155. [ 0.485378] rk30 lcdc0 probe ok!
  156. [ 0.485433] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf7028000
  157. [ 0.485506] lcdc1: dclk:74250000>>fps:60 rk30_load_screen for lcdc1 ok!
  158. [ 0.485529] fb2:phy:90c00000>>vir:f8000000>>len:0xc00000
  159. [ 0.485720] rk_fb_register>>>>>fb2
  160. [ 0.485860] rk_fb_register>>>>>fb3
  161. [ 0.485871] rk30 lcdc1 probe ok!
  162. [ 0.492364] NET: Registered protocol family 2
  163. [ 0.492500] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  164. [ 0.492835] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  165. [ 0.494671] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  166. [ 0.495755] TCP: Hash tables configured (established 131072 bind 65536)
  167. [ 0.495769] TCP reno registered
  168. [ 0.495783] UDP hash table entries: 512 (order: 2, 16384 bytes)
  169. [ 0.495822] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  170. [ 0.496169] NET: Registered protocol family 1
  171. [ 0.605314] RK29 Backlight Driver Initialized.
  172. [ 0.605507] Unpacking initramfs...
  173. [ 0.701868] Freeing initrd memory: 2048K
  174. [ 0.702049] rk30-tsadc rk30-tsadc: initialized
  175. [ 0.710778] Loaded driver for PL330 DMAC-1 rk29-pl330
  176. [ 0.710798] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  177. [ 0.710946] Loaded driver for PL330 DMAC-2 rk29-pl330
  178. [ 0.710960] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  179. [ 0.731560] highmem bounce pool size: 64 pages
  180. [ 0.731734] ashmem: initialized
  181. [ 0.736903] fuse init (API version 7.16)
  182. [ 0.738336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  183. [ 0.738355] io scheduler noop registered
  184. [ 0.738365] io scheduler deadline registered
  185. [ 0.738418] io scheduler cfq registered (default)
  186. [ 0.744475] rga: Driver loaded succesfully
  187. [ 0.745158] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  188. [ 0.795193] rk_serial rk_serial.0: membase 0xf704c000
  189. [ 0.795239] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  190. [ 0.845213] rk_serial rk_serial.3: membase 0xf7050000
  191. [ 0.845490] Rockchip ion module(version: 1.0) is successfully loaded
  192. [ 0.848008] loop: module loaded
  193. [ 0.848109] Android kernel panic handler initialized (bind=kpanic)
  194. [ 0.848803] PPP generic driver version 2.4.2
  195. [ 0.848983] PPP Deflate Compression module registered
  196. [ 0.848996] PPP BSD Compression module registered
  197. [ 0.852737] PPP MPPE Compression module registered
  198. [ 0.852754] NET: Registered protocol family 24
  199. [ 0.852833] usbcore: registered new interface driver asix
  200. [ 0.852881] usbcore: registered new interface driver cdc_ether
  201. [ 0.852927] usbcore: registered new interface driver dm9620
  202. [ 0.852972] usbcore: registered new interface driver SR9700_android
  203. [ 0.853018] usbcore: registered new interface driver net1080
  204. [ 0.853063] usbcore: registered new interface driver cdc_subset
  205. [ 0.853115] usbcore: registered new interface driver zaurus
  206. [ 0.853138] cdc_ncm: 04-Aug-2011
  207. [ 0.853182] usbcore: registered new interface driver cdc_ncm
  208. [ 0.853194] Rockchip WiFi SYS interface (V1.00) ...
  209. [ 0.853237] Initializing USB Mass Storage driver...
  210. [ 0.853307] usbcore: registered new interface driver usb-storage
  211. [ 0.853319] USB Mass Storage support registered.
  212. [ 0.853431] usbcore: registered new interface driver usbserial
  213. [ 0.853474] USB Serial support registered for generic
  214. [ 0.853527] usbcore: registered new interface driver usbserial_generic
  215. [ 0.853540] usbserial: USB Serial Driver core
  216. [ 0.853578] USB Serial support registered for GSM modem (1-port)
  217. [ 0.853633] usbcore: registered new interface driver option
  218. [ 0.853644] option: v0.7.2:USB Driver for GSM modems
  219. [ 1.064641] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
  220. [ 1.064661] usb20_otg usb20_otg: DWC OTG Controller
  221. [ 1.064683] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  222. [ 1.064709] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  223. [ 1.064717] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
  224. [ 1.064756] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  225. [ 1.064766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  226. [ 1.064775] usb usb1: Product: DWC OTG Controller
  227. [ 1.064781] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd
  228. [ 1.064788] usb usb1: SerialNumber: usb20_otg
  229. [ 1.065070] hub 1-0:1.0: USB hub found
  230. [ 1.065083] hub 1-0:1.0: 1 port detected
  231. [ 1.065611] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7100000
  232. [ 1.275880] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  233. [ 1.275895] usb20_host usb20_host: DWC OTG Controller
  234. [ 1.275913] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  235. [ 1.275939] usb20_host usb20_host: irq 49, io mem 0x00000000
  236. [ 1.275976] DWC_OTG: Init: Port Power? op_state=1
  237. [ 1.275982] DWC_OTG: Init: Power Port (0)
  238. [ 1.276015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  239. [ 1.276024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  240. [ 1.276033] usb usb2: Product: DWC OTG Controller
  241. [ 1.276039] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd
  242. [ 1.276046] usb usb2: SerialNumber: usb20_host
  243. [ 1.276292] hub 2-0:1.0: USB hub found
  244. [ 1.276304] hub 2-0:1.0: 1 port detected
  245. [ 1.277338] android_usb gadget: Mass Storage Function, version: 2009/09/11
  246. [ 1.277349] android_usb gadget: Number of LUNs=2
  247. [ 1.277357] lun0: LUN: removable file: (no medium)
  248. [ 1.277364] lun1: LUN: removable file: (no medium)
  249. [ 1.277474] android_usb gadget: android_usb ready
  250. [ 1.277645] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  251. [ 1.277900] mma7660 init
  252. [ 1.278294] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-004c/input/input1
  253. [ 1.278453] i2c-core: driver [mma7660] using legacy suspend method
  254. [ 1.278461] i2c-core: driver [mma7660] using legacy resume method
  255. [ 1.285518] using rtc device, rtc_hym8563, for alarms
  256. [ 1.285543] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
  257. [ 1.285639] Linux video capture interface: v2.00
  258. [ 1.286008] device-mapper: uevent: version 1.0.3
  259. [ 1.286190] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  260. [ 1.286345] Bluetooth: HCI UART driver ver 2.2
  261. [ 1.286354] Bluetooth: HCI H4 protocol initialized
  262. [ 1.286360] Bluetooth: HCILL protocol initialized
  263. [ 1.286465] cpuidle: using governor ladder
  264. [ 1.286473] cpuidle: using governor menu
  265. [ 1.346721] rk29_sdmmc_change_clk_div..1741.. newDiv=83, newCLK=298Khz [sd_mmc]
  266. [ 1.351836] .Line3506..The End of SDMMC-probe Ver.3.07 The last modify date is 2012-04-23. [sd_mmc]
  267. [ 1.351912] rk29_sdmmc_change_clk_div..1741.. newDiv=42, newCLK=294Khz [sdio]
  268. [ 1.351994] .Line3506..The End of SDMMC-probe Ver.3.07 The last modify date is 2012-04-23. [sdio]
  269. [ 1.353079] usbcore: registered new interface driver usbhid
  270. [ 1.353088] usbhid: USB HID core driver
  271. [ 1.353321] logger: created 256K log 'log_main'
  272. [ 1.353382] logger: created 256K log 'log_events'
  273. [ 1.353446] logger: created 256K log 'log_radio'
  274. [ 1.353504] logger: created 256K log 'log_system'
  275. [ 1.354155]
  276. [ 1.354158] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....[mmc0]
  277. [ 1.399464]
  278. [ 1.399467] mmc_attach_sd..1216.. ===== Begin to identify card as SD-card. [mmc0]
  279. [ 1.480655] RT5631 0-001a: dapm: unknown pin HP_L
  280. [ 1.480665] RT5631 0-001a: dapm: unknown pin HP_R
  281. [ 1.501340] asoc: RT5631 HiFi <-> rk29_i2s.0 mapping ok
  282. [ 1.501668] ALSA device list:
  283. [ 1.501675] #0: RK29_RT5631
  284. [ 1.501750] GACT probability NOT on
  285. [ 1.501760] Mirror/redirect action on
  286. [ 1.501767] u32 classifier
  287. [ 1.501771] Actions configured
  288. [ 1.501778] Netfilter messages via NETLINK v0.30.
  289. [ 1.501814] nf_conntrack version 0.5.0 (14008 buckets, 56032 max)
  290. [ 1.502122] ctnetlink v0.93: registering with nfnetlink.
  291. [ 1.502156] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  292. [ 1.502164] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  293. [ 1.502325] xt_time: kernel timezone is -0000
  294. [ 1.502438] ip_tables: (C) 2000-2006 Netfilter Core Team
  295. [ 1.502551] arp_tables: (C) 2002 David S. Miller
  296. [ 1.502588] TCP cubic registered
  297. [ 1.502917] NET: Registered protocol family 10
  298. [ 1.503397] Mobile IPv6
  299. [ 1.503421] ip6_tables: (C) 2000-2006 Netfilter Core Team
  300. [ 1.503518] IPv6 over IPv4 tunneling driver
  301. [ 1.504036] NET: Registered protocol family 17
  302. [ 1.504061] NET: Registered protocol family 15
  303. [ 1.504130] Bridge firewalling registered
  304. [ 1.504227] Bluetooth: RFCOMM TTY layer initialized
  305. [ 1.504241] Bluetooth: RFCOMM socket layer initialized
  306. [ 1.504248] Bluetooth: RFCOMM ver 1.11
  307. [ 1.504255] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  308. [ 1.504262] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  309. [ 1.504355] NET: Registered protocol family 35
  310. [ 1.504520] [BT_RFKILL]: Enter rfkill_rk_init
  311. [ 1.504585] [BT_RFKILL]: Request irq for bt wakeup host
  312. [ 1.504604] [BT_RFKILL]: ** disable irq
  313. [ 1.525187] [BT_RFKILL]: bt shut off power
  314. [ 1.555191] [BT_RFKILL]: rk903_26M device registered.
  315. [ 1.555266]
  316. [ 1.555269] sensor_mod_init..hm2057..
  317. [ 1.555337] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  318. [ 1.555872]
  319. [ 1.555874] rk_camera_probe Memory(start:0x8ee00000 size:0x600000) for IPP obtain
  320. [ 1.556009] get cif ldo failed!
  321. [ 1.556019] camera 33-0-hm2057_back: RK Camera driver attached to camera0(hm2057_back)
  322. [ 1.556037] rk_camera_add_device..1007..
  323. [ 1.556813] rtc_hym8563 1-0051: setting system clock to 2011-01-01 13:12:46 UTC (1293887566)
  324. [ 1.558633]
  325. [ 1.558636] sensor_probe..drivers/media/video/hm2057.c..4424..
  326. [ 1.558651] hm2057 sensor_ioctrl cmd(1) on(0)
  327. [ 1.561739]
  328. [ 1.561742] hm2057 pid = 0x2056
  329. [ 1.561749]
  330. [ 1.561751] sensor_probe..drivers/media/video/hm2057.c..4462 ret = 0
  331. [ 1.561900] camera 33-0-hm2057_back: RK Camera driver detached from camera0(hm2057_back)
  332. [ 1.561911]
  333. [ 1.561913] hm2057..sensor_ioctl..cmd:1
  334. [ 1.561920]
  335. [ 1.561922] hm2057..sensor_deactivate.. Enter
  336. [ 1.561929] hm2057 sensor_ioctrl cmd(1) on(1)
  337. [ 1.561951] get cif ldo failed!
  338. [ 1.561958] camera 33-0-hm2057_back: Probe hm2057_back success
  339. [ 1.562007] get cif ldo failed!
  340. [ 1.562015] camera 33-1-gc0308_front: RK Camera driver attached to camera1(gc0308_front)
  341. [ 1.562028] rk_camera_add_device..1007..
  342. [ 1.565734] camera 33-1-gc0308_front: RK Camera driver detached from camera1(gc0308_front)
  343. [ 1.675206] get cif ldo failed!
  344. [ 1.675216] camera 33-1-gc0308_front: Probe gc0308_front success
  345. [ 1.689666] rk29_sdmmc_change_clk_div..1741.. newDiv=2, newCLK=12375Khz [sd_mmc]
  346. [ 1.689744] mmc0: new SD card at address aaaa
  347. [ 1.689973] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
  348. [ 1.692297]
  349. [ 1.692299] msdos_partition..461... ==== Begin to parse sdcard-partition. [mmc0]
  350. [ 1.692311] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
  351. [ 1.692319] msdos_partition..543... ==== partition-1, size=1930240KB [mmc0]
  352. [ 1.692327] msdos_partition..571... ==== main partition-1....[mmc0]
  353. [ 1.692336] mmcblk0: p1
  354. [ 1.692602] mmc_rescan_try_freq..1717.. ===== Initialize SD-card successfully. [mmc0]
  355. [ 1.692618]
  356. [ 1.692620] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....[mmc1]
  357. [ 1.692630]
  358. [ 1.692632] =================
  359. [ 1.692634] mmc_rescan..1830.. ====find no SDMMC host. [mmc1]
  360. [ 2.365211] rk29_adc_battery_load_capacity: open file /data/bat_last_capacity.dat failed
  361. [ 2.365230] capacity = 100, new_capacity = 100, old_capacity = 100
  362. [ 3.161748] buf[0]=40 buf[1]=40
  363. [ 3.161886] input: eboda Touchscreen as /devices/virtual/input/input2
  364. [ 3.162191] Freeing init memory: 1152K
  365. [ 3.177338] rk30xxnand_ko: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.0.8+ SMP preempt mod_unload ARMv7 '
  366. [ 3.210494] init: cannot open '/initlogo.rle'
  367. [ 3.215330] init: Unable to open persistent property directory /data/property errno: 2
  368. [ 3.224535] android_usb: already disabled
  369. [ 3.229257] DWC_OTG: dwc_otg_pcd_ep_dequeue, bogus device state, c0afd43c, speed 0
  370. [ 3.249962] rk30_lcdc_blank>>>>>4
  371. [ 3.249980] rk30_lcdc_blank>>>>>0
  372. [ 8.250965] adb_open
  373. [ 9.295211] DWC_OTG: dwc_otg_hcd_connect_detect schedule delaywork
  374. [ 9.375256] DWC_OTG: dwc_otg_hcd_enable, disable host controller
  375. [ 9.375311] DWC_OTG: PortPower off
  376. [ 17.115207] DWC_OTG: ********vbus detect*********************************************
  377. [ 17.300582] DWC_OTG: ********soft connect!!!*****************************************
  378. [ 17.306591] DWC_OTG: USB SUSPEND
  379. [ 17.578818] DWC_OTG: USB RESET
  380. [ 17.665379] android_work: sent uevent USB_STATE=CONNECTED
  381. [ 17.669826] android_usb gadget: high speed config #1: android
  382. [ 17.670204] android_work: sent uevent USB_STATE=CONFIGURED
  383. [ 21.365488] rk29_adc_battery_timer_work old_capacity_mf = 5 && gBatteryData->bat_capacity=100
  384. [ 21.365551] rk29_adc_battery_timer_work gBatteryData->bat_voltage=4170
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!