API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 3rd, 2013
241
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.26 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.07-rc1-07435-g234e002-dirty (Jul 25 2013 - 21:13:12)
  2. Board: Mele_A1000
  3. DRAM: 512MB
  4. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  5. SUNXI SD/MMC: 0
  6.  
  7.  
  8. U-Boot 2013.07-rc1-07435-g234e002-dirty (Jul 25 2013 - 21:13:12) Allwinner Technology
  9.  
  10. CPU: Allwinner A10 (SUN4I)
  11. Board: Mele_A1000
  12. I2C: ready
  13. DRAM: 512 MiB
  14. MMC: SUNXI SD/MMC: 0
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. Net: emac
  19. Hit any key to stop autoboot: 3  0
  20. sun4i#fatload mmc 0 0x46000000 uImagefatload mmc 0 0x46000000 uImage                               
  21. reading uImage
  22. 4261836 bytes read in 221 ms (18.4 MiB/s)
  23. sun4i#bootm 0x46000000
  24. returning for bootm_low 1073741824
  25. retuning config arm 536870912
  26. ## Current stack ends at 0x5fe63da0 ## Booting kernel from Legacy Image at 46000000 ...
  27. Image Name: Linux-3.0.76
  28. Created: 2013-08-02 21:29:47 UTC
  29. Image Type: ARM Linux Kernel Image (uncompressed)
  30. Data Size: 4261772 Bytes = 4.1 MiB
  31. Load Address: 40008000
  32. Entry Point: 40008000
  33. Verifying Checksum ... OK
  34. Loading Kernel Image ... OK
  35. OK
  36. using: ATAGS
  37. ## Transferring control to Linux (at address 40008000)...
  38.  
  39. Starting kernel ...
  40.  
  41. <6>Initializing cgroup subsys cpuset
  42.  
  43. <5>Linux version 3.0.76 (root@hugo-devel) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 PREEMPT Fri Aug 2 23:29:38 CEST 2013
  44.  
  45. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  46.  
  47. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  48.  
  49. Machine: sun4i
  50.  
  51. <6>Memory cut off:
  52.  
  53. <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  54.  
  55. <4>Ignoring unrecognised tag 0x00000000
  56.  
  57. <6>Memory Reserved:
  58.  
  59. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  60.  
  61. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  62.  
  63. <6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  64.  
  65. <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  66.  
  67. Memory policy: ECC disabled, Data cache writeback
  68.  
  69. <6>chip-id: A10 (AW1623 revision B)
  70.  
  71. <7>On node 0 totalpages: 114688
  72.  
  73. <7>free_area_init_node: node 0, pgdat c07f9ba8, node_mem_map c08c1000
  74.  
  75. <7> Normal zone: 896 pages used for memmap
  76.  
  77. <7> Normal zone: 0 pages reserved
  78.  
  79. <7> Normal zone: 113792 pages, LIFO batch:31
  80.  
  81. <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  82.  
  83. <7>pcpu-alloc: [0] 0
  84.  
  85. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  86.  
  87. <5>Kernel command line: mem=448M@0x40000000 console=ttyS0,115200
  88.  
  89. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  90.  
  91. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  92.  
  93. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  94.  
  95. <6>Memory: 448MB = 448MB total
  96.  
  97. <5>Memory: 314624k/314624k available, 144128k reserved, 0K highmem
  98.  
  99. <5>Virtual kernel memory layout:
  100.  
  101. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  102.  
  103. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  104.  
  105. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  106.  
  107. vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
  108.  
  109. lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  110.  
  111. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  112.  
  113. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  114.  
  115. .init : 0xc0008000 - 0xc0030000 ( 160 kB)
  116.  
  117. .text : 0xc0030000 - 0xc07b4088 (7697 kB)
  118.  
  119. .data : 0xc07b6000 - 0xc0803150 ( 309 kB)
  120.  
  121. .bss : 0xc0803174 - 0xc08c0a18 ( 759 kB)
  122.  
  123. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  124.  
  125. <6>NR_IRQS:128 nr_irqs:128 128
  126.  
  127. <6>timer0: Periodic Mode
  128.  
  129. <6>Console: colour dummy device 80x30
  130.  
  131. <6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
  132.  
  133. <6>pid_max: default: 32768 minimum: 301
  134.  
  135. <6>Mount-cache hash table entries: 512
  136.  
  137. <6>Initializing cgroup subsys cpuacct
  138.  
  139. <6>Initializing cgroup subsys devices
  140.  
  141. <6>Initializing cgroup subsys freezer
  142.  
  143. <6>Initializing cgroup subsys blkio
  144.  
  145. <6>CPU: Testing write buffer coherency: ok
  146.  
  147. <6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  148.  
  149. <6>devtmpfs: initialized
  150.  
  151. <6>print_constraints: dummy:
  152.  
  153. <6>NET: Registered protocol family 16
  154.  
  155. <6>hw-breakpoint: debug architecture 0x4 unsupported.
  156.  
  157. <6>Init eGon pin module V2.0
  158.  
  159. SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  160.  
  161. <6>Initialize DMAC OK
  162.  
  163. <6>bio: create slab <bio-0> at 0
  164.  
  165. <6>sunxi_gpio driver init ver 1.3
  166.  
  167. <6>sunxi_gpio_probe can't find script.bin '[gpio_para]' 'gpio_used'
  168.  
  169. <4>gpio-sunxi: probe of gpio-sunxi failed with error -4
  170.  
  171. <5>SCSI subsystem initialized
  172.  
  173. <7>libata version 3.00 loaded.
  174.  
  175. <6>usbcore: registered new interface driver usbfs
  176.  
  177. <6>usbcore: registered new interface driver hub
  178.  
  179. <6>usbcore: registered new device driver usb
  180.  
  181. <6>Advanced Linux Sound Architecture Driver Version 1.0.24.
  182.  
  183. <6>Bluetooth: Core ver 2.16
  184.  
  185. <6>NET: Registered protocol family 31
  186.  
  187. <6>Bluetooth: HCI device and connection manager initialized
  188.  
  189. <6>Bluetooth: HCI socket layer initialized
  190.  
  191. <6>Bluetooth: L2CAP socket layer initialized
  192.  
  193. <6>Bluetooth: SCO socket layer initialized
  194.  
  195. <6>Switching to clocksource aw 64bits couter
  196.  
  197. <6>cfg80211: Calling CRDA to update world regulatory domain
  198.  
  199. <5>FS-Cache: Loaded
  200.  
  201. <6>CacheFiles: Loaded
  202.  
  203. <6>Switched to NOHz mode on CPU #0
  204.  
  205. [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  206.  
  207. WRN:L142(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(0) enable failed
  208.  
  209. WRN:L148(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(0) port type failed
  210.  
  211. WRN:L154(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(0) detect type failed
  212.  
  213. WRN:L160(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(0) id failed
  214.  
  215. WRN:L166(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(0) det_vbus failed
  216.  
  217. WRN:L172(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(0) drv_vbus failed
  218.  
  219. WRN:L142(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) enable failed
  220.  
  221. WRN:L148(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) port type failed
  222.  
  223. WRN:L154(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) detect type failed
  224.  
  225. WRN:L160(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) id failed
  226.  
  227. WRN:L166(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) det_vbus failed
  228.  
  229. WRN:L172(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(1) drv_vbus failed
  230.  
  231. WRN:L142(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) enable failed
  232.  
  233. WRN:L148(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) port type failed
  234.  
  235. WRN:L154(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) detect type failed
  236.  
  237. WRN:L160(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) id failed
  238.  
  239. WRN:L166(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) det_vbus failed
  240.  
  241. WRN:L172(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):ERR: get usbc(2) drv_vbus failed
  242.  
  243. WRN:L481(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/manager/usb_manager.c):wrn: usb0 is disable
  244.  
  245. [sw_hcd0]: usb host driver initialize........
  246.  
  247. [sw_udc]: udc_init: version 20080411
  248.  
  249. WRN:L3794(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: platform_driver_register failed
  250.  
  251. axp driver uning configuration failed(354)
  252.  
  253. <6>NET: Registered protocol family 2
  254.  
  255. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  256.  
  257. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  258.  
  259. <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  260.  
  261. <6>TCP: Hash tables configured (established 16384 bind 16384)
  262.  
  263. <6>TCP reno registered
  264.  
  265. <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
  266.  
  267. <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  268.  
  269. <6>NET: Registered protocol family 1
  270.  
  271. <6>RPC: Registered named UNIX socket transport module.
  272.  
  273. <6>RPC: Registered udp transport module.
  274.  
  275. <6>RPC: Registered tcp transport module.
  276.  
  277. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  278.  
  279. <6>PMU: registered new PMU device of type 0
  280.  
  281. <6>audit: initializing netlink socket (disabled)
  282.  
  283. <5>type=2000 audit(0.479:1): initialized
  284.  
  285. <5>VFS: Disk quotas dquot_6.5.2
  286.  
  287. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  288.  
  289. <6>NTFS driver 2.1.30 [Flags: R/W].
  290.  
  291. <6>fuse init (API version 7.16)
  292.  
  293. <6>msgmni has been set to 614
  294.  
  295. <6>alg: No test for stdrng (krng)
  296.  
  297. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  298.  
  299. <6>io scheduler noop registered
  300.  
  301. <6>io scheduler deadline registered
  302.  
  303. <6>io scheduler cfq registered (default)
  304.  
  305. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  306.  
  307. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  308.  
  309. [uart]: failed to get uart0's used information
  310.  
  311. [uart]: failed to get uart1's used information
  312.  
  313. [uart]: failed to get uart2's used information
  314.  
  315. [uart]: failed to get uart3's used information
  316.  
  317. [uart]: failed to get uart4's used information
  318.  
  319. [uart]: failed to get uart5's used information
  320.  
  321. [uart]: failed to get uart6's used information
  322.  
  323. [uart]: failed to get uart7's used information
  324.  
  325. <7>G2D: drv_g2d_init
  326.  
  327. <6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  328.  
  329. <6>G2D: head:c9000000,tail:ca000000
  330.  
  331. <6>G2D: Module initialized.major:251
  332.  
  333. <6>brd: module loaded
  334.  
  335. <6>loop: module loaded
  336.  
  337. nand init fetch emac using configuration failed
  338.  
  339. nand driver is disabled
  340.  
  341. <4>emac_init fetch emac using configuration failed
  342.  
  343. <6>emac driver is disabled
  344.  
  345. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  346.  
  347. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  348.  
  349. WRN:L86(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2 enable failed
  350.  
  351. WRN:L96(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc1(usbc1) id failed
  352.  
  353. WRN:L86(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2 enable failed
  354.  
  355. WRN:L96(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc1(usbc1) id failed
  356.  
  357. WRN:L432(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/host/sw_hci_sunxi.c):ERR: gpio_request failed
  358.  
  359. WRN:L859(/home/hugo/Desktop/Smart1/linux-sunxi/drivers/usb/host/sw_hci_sunxi.c):ERR: usb1 alloc_pin failed
  360.  
  361. <6>Initializing USB Mass Storage driver...
  362.  
  363. <6>usbcore: registered new interface driver usb-storage
  364.  
  365. <6>USB Mass Storage support registered.
  366.  
  367. <6>usbcore: registered new interface driver ums-alauda
  368.  
  369. <6>usbcore: registered new interface driver ums-cypress
  370.  
  371. <6>usbcore: registered new interface driver ums-datafab
  372.  
  373. <6>usbcore: registered new interface driver ums_eneub6250
  374.  
  375. <6>usbcore: registered new interface driver ums-freecom
  376.  
  377. <6>usbcore: registered new interface driver ums-isd200
  378.  
  379. <6>usbcore: registered new interface driver ums-jumpshot
  380.  
  381. <6>usbcore: registered new interface driver ums-karma
  382.  
  383. <6>usbcore: registered new interface driver ums-onetouch
  384.  
  385. <6>usbcore: registered new interface driver ums-realtek
  386.  
  387. <6>usbcore: registered new interface driver ums-sddr09
  388.  
  389. <6>usbcore: registered new interface driver ums-sddr55
  390.  
  391. <6>usbcore: registered new interface driver ums-usbat
  392.  
  393. <6>mousedev: PS/2 mouse device common for all mice
  394.  
  395. sunxi RTC version 0.1
  396.  
  397. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  398.  
  399. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  400.  
  401. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  402.  
  403. <6>sunxi-rtc sunxi-rtc: read time 2010-1-1 3:41:0
  404.  
  405. <6>using rtc device, rtc, for alarms<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  406.  
  407. <6>i2c /dev entries driver
  408.  
  409. !!! base_Addr = 0xdc8b4c00
  410.  
  411. config i2c gpio with gpio_config api
  412.  
  413. <3>gpio count < =0 ,gpio_count is: 0
  414.  
  415. <4>twi0 request gpio fail!
  416.  
  417. request i2c gpio failed!
  418.  
  419. <4>Trying to free nonexistent resource <0000000000000000-00000000ffffffff>
  420.  
  421. <4>sunxi-i2c: probe of sunxi-i2c.0 failed with error -5
  422.  
  423. !!! base_Addr = 0xdc8b6000
  424.  
  425. <3>gpio count < =0 ,gpio_count is: 0
  426.  
  427. <4>twi1 request gpio fail!
  428.  
  429. request i2c gpio failed!
  430.  
  431. <4>Trying to free nonexistent resource <0000000000000000-00000000ffffffff>
  432.  
  433. <4>sunxi-i2c: probe of sunxi-i2c.1 failed with error -5
  434.  
  435. !!! base_Addr = 0xdc8b8400
  436.  
  437. <3>gpio count < =0 ,gpio_count is: 0
  438.  
  439. <4>twi2 request gpio fail!
  440.  
  441. request i2c gpio failed!
  442.  
  443. <4>Trying to free nonexistent resource <0000000000000000-00000000ffffffff>
  444.  
  445. <4>sunxi-i2c: probe of sunxi-i2c.2 failed with error -5
  446.  
  447. <6>lirc_dev: IR Remote Control driver registered, major 250
  448.  
  449. <6>IR NEC protocol handler initialized
  450.  
  451. <6>IR RC5(x) protocol handler initialized
  452.  
  453. <6>IR RC6 protocol handler initialized
  454.  
  455. <6>IR JVC protocol handler initialized
  456.  
  457. <6>IR Sony protocol handler initialized
  458.  
  459. <6>IR RC5 (streamzap) protocol handler initialized
  460.  
  461. <6>IR LIRC bridge handler initialized
  462.  
  463. <6>Linux video capture interface: v2.00
  464.  
  465. [cedar dev]: install start!!!
  466.  
  467. [cedar dev]: install end!!!
  468.  
  469. [ace_drv] start!!!
  470.  
  471. [ace_drv] init end!!!
  472.  
  473. [pa_drv] start!!!
  474.  
  475. [pa_drv] init end!!!
  476.  
  477. <6>Bluetooth: HCI UART driver ver 2.2
  478.  
  479. <6>Bluetooth: HCI H4 protocol initialized
  480.  
  481. <6>Bluetooth: HCI BCSP protocol initialized
  482.  
  483. <6>Bluetooth: HCILL protocol initialized
  484.  
  485. <6>cpuidle: using governor ladder
  486.  
  487. <6>cpuidle: using governor menu
  488.  
  489. [mmc_pm]: failed to fetch sdio card configuration!
  490.  
  491. [mmc]: sunximmc_init
  492.  
  493. sunximmc_init fetch mmc0 using configuration failed
  494.  
  495. sunximmc_init fetch mmc1 using configuration failed
  496.  
  497. sunximmc_init fetch mmc2 using configuration failed
  498.  
  499. sunximmc_init fetch mmc3 using configuration failed
  500.  
  501. [mmc]: sunxi mmc controller using config : 0x0
  502.  
  503. [mmc]: sunximmc_init(L965): cannot find any using configuration for controllers, return directly!
  504.  
  505. <6>sunxi_leds driver init
  506.  
  507. <6>sunxi leds can't find script data '[leds_para]' 'leds_used'
  508.  
  509. <6>usbcore: registered new interface driver usbhid
  510.  
  511. <6>usbhid: USB HID core driver
  512.  
  513. enter sun4i Audio codec!!!
  514.  
  515. <6>sun4i audio support initialized
  516.  
  517. <3>script parser fetch err.
  518.  
  519. audio codec_wakeup request gpio fail!
  520.  
  521. <3> (null): not found (0).
  522.  
  523. <6>asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  524.  
  525. <6>ALSA device list:
  526.  
  527. <6> #0: sun4i-sndhdmi
  528.  
  529. <6>IPv4 over IPv4 tunneling driver
  530.  
  531. <6>TCP cubic registered
  532.  
  533. <6>Initializing XFRM netlink socket
  534.  
  535. <6>NET: Registered protocol family 10
  536.  
  537. <6>NET: Registered protocol family 17
  538.  
  539. <6>NET: Registered protocol family 15
  540.  
  541. <6>Bluetooth: RFCOMM TTY layer initialized
  542.  
  543. <6>Bluetooth: RFCOMM socket layer initialized
  544.  
  545. <6>Bluetooth: RFCOMM ver 1.11
  546.  
  547. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  548.  
  549. <6>Bluetooth: BNEP filters: protocol multicast
  550.  
  551. <6>802.1Q VLAN Support v1.8
  552.  
  553. [mmc_pm]: No sdio card, please check your config !!
  554.  
  555. <5>Registering the dns_resolver key type
  556.  
  557. <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  558.  
  559. <5>Registering SWP/SWPB emulation handler
  560.  
  561. <6>registered taskstats version 1
  562.  
  563. <4>[DISP] lcd0_para.lcd_used not exit
  564.  
  565. <4>[DISP] lcd1_para.lcd_used not exit
  566.  
  567. <4>[DISP] fetch script data disp_init.disp_init_enable fail
  568.  
  569. <6>I2C: i2c-0: HDMI I2C adapter
  570.  
  571. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  572.  
  573. <6>sunxi-rtc sunxi-rtc: read time 2010-1-1 3:41:1
  574.  
  575. <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 03:41:01 UTC (1262317261)
  576.  
  577. <4>Warning: unable to open an initial console.
  578.  
  579. VFS: Cannot open root device "(null)" or unknown-block(0,0)
  580.  
  581. Please append a correct "root=" boot option; here are the available partitions:
  582.  
  583. <0>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  584.  
  585. [<c003c2dc>] (unwind_backtrace+0x0/0x138) from [<c055f348>] (panic+0x64/0x178)
  586.  
  587. [<c055f348>] (panic+0x64/0x178) from [<c0008de4>] (mount_block_root+0x1d4/0x294)
  588.  
  589. [<c0008de4>] (mount_block_root+0x1d4/0x294) from [<c0009154>] (prepare_namespace+0x164/0x1c8)
  590.  
  591. [<c0009154>] (prepare_namespace+0x164/0x1c8) from [<c0008ad4>] (kernel_init+0x148/0x17c)
  592.  
  593. [<c0008ad4>] (kernel_init+0x148/0x17c) from [<c003761c>] (kernel_thread_exit+0x0/0x8)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!