API tools faq
paste
WalterHWhite

next boot

WalterHWhite
Dec 5th, 2024
84
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.54 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  2. [ 0.000000] Linux version 6.8.0-1010-raspi (buildd@bos03-arm64-097) (aarch64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #11-Ubuntu SMP PREEMPT_DYNAMIC Thu Aug 8 23:22:41 UTC 2024 (Ubuntu 6.8.0-1010.11-raspi 6.8.12)
  3. [ 0.000000] KASLR enabled
  4. [ 0.000000] random: crng init done
  5. [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
  6. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000b800000, size 512 MiB
  7. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  8. [ 0.000000] OF: reserved mem: 0x000000000b800000..0x000000002b7fffff (524288 KiB) map reusable linux,cma
  9. [ 0.000000] OF: reserved mem: 0x000000003ee64180..0x000000003ee6422b (0 KiB) nomap non-reusable nvram@0
  10. [ 0.000000] Zone ranges:
  11. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  12. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
  13. [ 0.000000] Normal empty
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff]
  17. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  18. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
  19. [ 0.000000] On node 0, zone DMA32: 19712 pages in unavailable ranges
  20. [ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges
  21. [ 0.000000] percpu: Embedded 52 pages/cpu s88232 r8192 d116568 u212992
  22. [ 0.000000] Detected PIPT I-cache on CPU0
  23. [ 0.000000] CPU features: detected: Spectre-v2
  24. [ 0.000000] CPU features: detected: Spectre-v3a
  25. [ 0.000000] CPU features: detected: Spectre-v4
  26. [ 0.000000] CPU features: detected: Spectre-BHB
  27. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  28. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  29. [ 0.000000] CPU features: detected: ARM erratum 1742098
  30. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  31. [ 0.000000] alternatives: applying boot alternatives
  32. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:09:C6:71 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 rootwait fixrtc
  33. [ 0.000000] Unknown kernel command line parameters "fixrtc multipath=off", will be passed to user space.
  34. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  35. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  36. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996660
  37. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  38. [ 0.000000] software IO TLB: area num 4.
  39. [ 0.000000] software IO TLB: mapped [mem 0x0000000037300000-0x000000003b300000] (64MB)
  40. [ 0.000000] Memory: 3288164K/4049920K available (15104K kernel code, 2716K rwdata, 9508K rodata, 6528K init, 852K bss, 237468K reserved, 524288K cma-reserved)
  41. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  42. [ 0.000000] ftrace: allocating 44947 entries in 176 pages
  43. [ 0.000000] ftrace: allocated 176 pages with 3 groups
  44. [ 0.000000] trace event string verifier disabled
  45. [ 0.000000] Dynamic Preempt: full
  46. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  47. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  48. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  49. [ 0.000000] Rude variant of Tasks RCU enabled.
  50. [ 0.000000] Tracing variant of Tasks RCU enabled.
  51. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
  52. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  53. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  54. [ 0.000000] Root IRQ handler: gic_handle_irq
  55. [ 0.000000] GIC: Using split EOI/Deactivate mode
  56. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  57. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  58. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  59. [ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  60. [ 0.000398] Console: colour dummy device 80x25
  61. [ 0.000424] printk: legacy console [tty1] enabled
  62. [ 0.001270] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=54000)
  63. [ 0.001316] pid_max: default: 32768 minimum: 301
  64. [ 0.002334] LSM: initializing lsm=lockdown,capability,yama,apparmor,integrity
  65. [ 0.002972] Yama: becoming mindful.
  66. [ 0.003171] AppArmor: AppArmor initialized
  67. [ 0.003648] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  68. [ 0.003717] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  69. [ 0.008066] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  70. [ 0.008275] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  71. [ 0.008493] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  72. [ 0.008946] rcu: Hierarchical SRCU implementation.
  73. [ 0.008998] rcu: Max phase no-delay instances is 400.
  74. [ 0.012105] smp: Bringing up secondary CPUs ...
  75. [ 0.013146] Detected PIPT I-cache on CPU1
  76. [ 0.013279] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  77. [ 0.014461] Detected PIPT I-cache on CPU2
  78. [ 0.014563] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  79. [ 0.015680] Detected PIPT I-cache on CPU3
  80. [ 0.015784] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  81. [ 0.015947] smp: Brought up 1 node, 4 CPUs
  82. [ 0.016045] SMP: Total of 4 processors activated.
  83. [ 0.016068] CPU: All CPU(s) started at EL2
  84. [ 0.016103] CPU features: detected: 32-bit EL0 Support
  85. [ 0.016124] CPU features: detected: 32-bit EL1 Support
  86. [ 0.016149] CPU features: detected: CRC32 instructions
  87. [ 0.016267] alternatives: applying system-wide alternatives
  88. [ 0.017252] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  89. [ 0.018963] devtmpfs: initialized
  90. [ 0.031205] Enabled cp15_barrier support
  91. [ 0.031271] Enabled setend support
  92. [ 0.031550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  93. [ 0.031604] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  94. [ 0.044591] pinctrl core: initialized pinctrl subsystem
  95. [ 0.046504] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  96. [ 0.048309] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  97. [ 0.048622] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  98. [ 0.049554] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  99. [ 0.049663] audit: initializing netlink subsys (disabled)
  100. [ 0.049997] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
  101. [ 0.050657] thermal_sys: Registered thermal governor 'fair_share'
  102. [ 0.050672] thermal_sys: Registered thermal governor 'bang_bang'
  103. [ 0.050701] thermal_sys: Registered thermal governor 'step_wise'
  104. [ 0.050753] thermal_sys: Registered thermal governor 'user_space'
  105. [ 0.050851] cpuidle: using governor ladder
  106. [ 0.050943] cpuidle: using governor menu
  107. [ 0.051278] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  108. [ 0.051497] ASID allocator initialised with 32768 entries
  109. [ 0.052847] Serial: AMBA PL011 UART driver
  110. [ 0.065998] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  111. [ 0.083313] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-02-29T12:24:53, variant start
  112. [ 0.084329] raspberrypi-firmware soc:firmware: Firmware hash is f4e2138c2adc8f3a92a3a65939e458f11d7298ba
  113. [ 0.091499] platform fd500000.pcie: Fixed dependency cycle(s) with /scb/pcie@7d500000
  114. [ 0.096387] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
  115. [ 0.096421] Modules: 0 pages in range for non-PLT usage
  116. [ 0.096432] Modules: 515552 pages in range for PLT usage
  117. [ 0.098099] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  118. [ 0.098149] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  119. [ 0.098176] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  120. [ 0.098201] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  121. [ 0.098226] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  122. [ 0.098250] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  123. [ 0.098275] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  124. [ 0.098299] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  125. [ 0.103320] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1
  126. [ 0.107046] iommu: Default domain type: Translated
  127. [ 0.107090] iommu: DMA domain TLB invalidation policy: strict mode
  128. [ 0.109479] SCSI subsystem initialized
  129. [ 0.109775] usbcore: registered new interface driver usbfs
  130. [ 0.109840] usbcore: registered new interface driver hub
  131. [ 0.109924] usbcore: registered new device driver usb
  132. [ 0.110047] pps_core: LinuxPPS API ver. 1 registered
  133. [ 0.110073] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  134. [ 0.110118] PTP clock support registered
  135. [ 0.110181] EDAC MC: Ver: 3.0.0
  136. [ 0.112187] NetLabel: Initializing
  137. [ 0.112222] NetLabel: domain hash size = 128
  138. [ 0.112244] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  139. [ 0.112375] NetLabel: unlabeled traffic allowed by default
  140. [ 0.113076] clocksource: Switched to clocksource arch_sys_counter
  141. [ 0.143658] VFS: Disk quotas dquot_6.6.0
  142. [ 0.143813] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  143. [ 0.145169] AppArmor: AppArmor Filesystem Enabled
  144. [ 0.158145] NET: Registered PF_INET protocol family
  145. [ 0.158561] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  146. [ 0.219961] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  147. [ 0.220172] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  148. [ 0.220238] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  149. [ 0.220429] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  150. [ 0.221135] TCP: Hash tables configured (established 32768 bind 32768)
  151. [ 0.221704] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
  152. [ 0.221969] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  153. [ 0.222042] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  154. [ 0.222449] NET: Registered PF_UNIX/PF_LOCAL protocol family
  155. [ 0.222526] NET: Registered PF_XDP protocol family
  156. [ 0.222568] PCI: CLS 0 bytes, default 64
  157. [ 0.222955] Trying to unpack rootfs image as initramfs...
  158. [ 0.225247] kvm [1]: IPA Size Limit: 44 bits
  159. [ 0.228235] kvm [1]: vgic interrupt IRQ9
  160. [ 0.228340] kvm [1]: Hyp mode initialized successfully
  161. [ 0.230674] Initialise system trusted keyrings
  162. [ 0.230778] Key type blacklist registered
  163. [ 0.231196] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  164. [ 0.231357] zbud: loaded
  165. [ 0.235087] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  166. [ 0.303369] Key type asymmetric registered
  167. [ 0.303429] Asymmetric key parser 'x509' registered
  168. [ 0.303565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  169. [ 0.303949] io scheduler mq-deadline registered
  170. [ 0.305329] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 23)
  171. [ 0.315144] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  172. [ 0.315221] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  173. [ 0.315328] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  174. [ 0.315431] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  175. [ 0.316857] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  176. [ 0.316929] pci_bus 0000:00: root bus resource [bus 00-ff]
  177. [ 0.316964] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  178. [ 0.317111] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 PCIe Root Port
  179. [ 0.317206] pci 0000:00:00.0: PCI bridge to [bus 01]
  180. [ 0.317248] pci 0000:00:00.0: bridge window [mem 0x638000000-0x6380fffff]
  181. [ 0.317452] pci 0000:00:00.0: PME# supported from D0 D3hot
  182. [ 0.321755] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
  183. [ 0.321983] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
  184. [ 0.322120] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
  185. [ 0.427138] brcm-pcie fd500000.pcie: clkreq-mode set to default
  186. [ 0.429270] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  187. [ 0.429475] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 PCIe Endpoint
  188. [ 0.429618] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
  189. [ 0.430153] pci 0000:01:00.0: PME# supported from D0 D3cold
  190. [ 0.431209] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]: assigned
  191. [ 0.431262] pci 0000:01:00.0: BAR 0 [mem 0x600000000-0x600000fff 64bit]: assigned
  192. [ 0.431318] pci 0000:00:00.0: PCI bridge to [bus 01]
  193. [ 0.431352] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  194. [ 0.431864] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  195. [ 0.432203] pcieport 0000:00:00.0: PME: Signaling with IRQ 27
  196. [ 0.432793] pcieport 0000:00:00.0: AER: enabled with IRQ 27
  197. [ 0.434177] simple-framebuffer 3e370000.framebuffer: framebuffer at 0x3e370000, 0x753000 bytes
  198. [ 0.434239] simple-framebuffer 3e370000.framebuffer: format=a8r8g8b8, mode=1600x1200x32, linelength=6400
  199. [ 0.442809] Console: switching to colour frame buffer device 200x75
  200. [ 0.450327] simple-framebuffer 3e370000.framebuffer: fb0: simplefb registered!
  201. [ 0.542247] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  202. [ 0.543803] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
  203. [ 0.546200] printk: legacy console [ttyS0] disabled
  204. [ 0.547035] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 28, base_baud = 62500000) is a 16550
  205. [ 0.547215] printk: legacy console [ttyS0] enabled
  206. [ 1.013475] Freeing initrd memory: 55396K
  207. [ 1.023128] iproc-rng200 fe104000.rng: hwrng registered
  208. [ 1.870513] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
  209. [ 1.891630] loop: module loaded
  210. [ 1.896017] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  211. [ 1.908228] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  212. [ 2.108228] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  213. [ 2.115744] usbcore: registered new interface driver lan78xx
  214. [ 2.121641] usbcore: registered new interface driver smsc95xx
  215. [ 2.127985] mousedev: PS/2 mouse device common for all mice
  216. [ 2.133746] i2c_dev: i2c /dev entries driver
  217. [ 2.140763] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  218. [ 2.150643] sdhci: Secure Digital Host Controller Interface driver
  219. [ 2.157034] sdhci: Copyright(c) Pierre Ossman
  220. [ 2.161631] sdhci-pltfm: SDHCI platform and OF driver helper
  221. [ 2.169627] ledtrig-cpu: registered to indicate activity on CPUs
  222. [ 2.175895] hid: raw HID events driver (C) Jiri Kosina
  223. [ 2.186514] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  224. [ 2.195116] watchdog: Delayed init of the lockup detector failed: -19
  225. [ 2.198473] NET: Registered PF_INET6 protocol family
  226. [ 2.200871] mmc1: SDHCI controller on fe300000.mmcnr [fe300000.mmcnr] using PIO
  227. [ 2.201726] watchdog: Hard watchdog permanently disabled
  228. [ 2.236823] Segment Routing with IPv6
  229. [ 2.240663] In-situ OAM (IOAM) with IPv6
  230. [ 2.244768] NET: Registered PF_PACKET protocol family
  231. [ 2.250140] Key type dns_resolver registered
  232. [ 2.260694] registered taskstats version 1
  233. [ 2.265205] Loading compiled-in X.509 certificates
  234. [ 2.271730] Loaded X.509 cert 'Build time autogenerated kernel key: b4a5bd3d6cdd8489160f9199f48187b3bdab8890'
  235. [ 2.283106] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
  236. [ 2.284627] mmc1: new high speed SDIO card at address 0001
  237. [ 2.294259] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
  238. [ 2.308805] blacklist: Loading compiled-in revocation X.509 certificates
  239. [ 2.315680] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
  240. [ 2.325732] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
  241. [ 2.336405] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
  242. [ 2.347428] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
  243. [ 2.358103] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
  244. [ 2.369035] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
  245. [ 2.381293] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
  246. [ 2.393527] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
  247. [ 2.415571] Key type .fscrypt registered
  248. [ 2.421003] Key type fscrypt-provisioning registered
  249. [ 2.519482] Key type encrypted registered
  250. [ 2.525372] AppArmor: AppArmor sha256 policy hashing enabled
  251. [ 2.532741] ima: No TPM chip found, activating TPM-bypass!
  252. [ 2.539762] ima: Allocated hash algorithm: sha1
  253. [ 2.545690] ima: No architecture policies found
  254. [ 2.551664] evm: Initialising EVM extended attributes:
  255. [ 2.558198] evm: security.selinux
  256. [ 2.562857] evm: security.SMACK64
  257. [ 2.567500] evm: security.SMACK64EXEC
  258. [ 2.572485] evm: security.SMACK64TRANSMUTE
  259. [ 2.577900] evm: security.SMACK64MMAP
  260. [ 2.582868] evm: security.apparmor
  261. [ 2.587552] evm: security.ima
  262. [ 2.591775] evm: security.capability
  263. [ 2.596626] evm: HMAC attrs: 0x1
  264. [ 2.605579] uart-pl011 fe201000.serial: there is not valid maps for state default
  265. [ 2.615758] uart-pl011 fe201000.serial: cts_event_workaround enabled
  266. [ 2.623940] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 37, base_baud = 0) is a PL011 rev2
  267. [ 2.634623] serial serial0: tty port ttyAMA1 registered
  268. [ 2.642093] of_cfs_init
  269. [ 2.645952] of_cfs_init: OK
  270. [ 2.650361] clk: Disabling unused clocks
  271. [ 2.683188] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  272. [ 2.700927] Freeing unused kernel memory: 6528K
  273. [ 2.730184] Checked W+X mappings: passed, no W+X pages found
  274. [ 2.737162] Run /init as init process
  275. [ 3.609133] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
  276. [ 3.614533] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
  277. [ 3.624530] xhci_hcd 0000:01:00.0: xHCI Host Controller
  278. [ 3.626267] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
  279. [ 3.631115] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  280. [ 3.654780] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0300240000000890
  281. [ 3.668670] xhci_hcd 0000:01:00.0: xHCI Host Controller
  282. [ 3.676120] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  283. [ 3.685100] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  284. [ 3.693361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
  285. [ 3.703593] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  286. [ 3.712573] usb usb1: Product: xHCI Host Controller
  287. [ 3.719523] usb usb1: Manufacturer: Linux 6.8.0-1010-raspi xhci-hcd
  288. [ 3.727340] usb usb1: SerialNumber: 0000:01:00.0
  289. [ 3.734425] hub 1-0:1.0: USB hub found
  290. [ 3.740310] hub 1-0:1.0: 1 port detected
  291. [ 3.740625] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
  292. [ 3.743540] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
  293. [ 3.753197] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
  294. [ 3.755954] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  295. [ 3.781818] usb usb2: Product: xHCI Host Controller
  296. [ 3.788257] usb usb2: Manufacturer: Linux 6.8.0-1010-raspi xhci-hcd
  297. [ 3.796104] usb usb2: SerialNumber: 0000:01:00.0
  298. [ 3.802842] hub 2-0:1.0: USB hub found
  299. [ 3.808287] hub 2-0:1.0: 4 ports detected
  300. [ 3.971213] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
  301. [ 3.980850] dwc2 fe980000.usb: DWC OTG Controller
  302. [ 3.987402] dwc2 fe980000.usb: new USB bus registered, assigned bus number 3
  303. [ 3.996020] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  304. [ 3.996023] dwc2 fe980000.usb: irq 44, io mem 0xfe980000
  305. [ 4.010808] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
  306. [ 4.020417] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  307. [ 4.028953] usb usb3: Product: DWC OTG Controller
  308. [ 4.034919] usb usb3: Manufacturer: Linux 6.8.0-1010-raspi dwc2_hsotg
  309. [ 4.042670] usb usb3: SerialNumber: fe980000.usb
  310. [ 4.048978] hub 3-0:1.0: USB hub found
  311. [ 4.054268] hub 3-0:1.0: 1 port detected
  312. [ 4.126346] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  313. [ 4.136817] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  314. [ 4.146134] usb 1-1: Product: USB2.0 Hub
  315. [ 4.154460] hub 1-1:1.0: USB hub found
  316. [ 4.160225] hub 1-1:1.0: 4 ports detected
  317. [ 4.239560] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
  318. [ 4.261606] usb 2-1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
  319. [ 4.272034] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  320. [ 4.281365] usb 2-1: Product: ASM1153USB3.0TOSATA
  321. [ 4.288212] usb 2-1: Manufacturer: ASM1153USB3.0TOSATA
  322. [ 4.295462] usb 2-1: SerialNumber: 123456789019
  323. [ 4.321211] usbcore: registered new interface driver usb-storage
  324. [ 4.351189] scsi host0: uas
  325. [ 4.355736] usbcore: registered new interface driver uas
  326. [ 4.356339] scsi 0:0:0:0: Direct-Access ASM1153U ASM1153USB3.0TOS 0 PQ: 0 ANSI: 6
  327. [ 4.374174] sd 0:0:0:0: Attached scsi generic sg0 type 0
  328. [ 4.381638] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
  329. [ 4.391125] sd 0:0:0:0: [sda] Write Protect is off
  330. [ 4.397848] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  331. [ 4.408959] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  332. [ 4.416573] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
  333. [ 4.426486] sda: sda1 sda2
  334. [ 4.431103] sd 0:0:0:0: [sda] Attached SCSI disk
  335. [ 4.461103] usb 1-1.2: new high-speed USB device number 3 using xhci_hcd
  336. [ 4.546534] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
  337. [ 4.556714] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  338. [ 4.566198] usb 1-1.2: Product: USB 2.0 Hub
  339. [ 4.576289] hub 1-1.2:1.0: USB hub found
  340. [ 4.582017] hub 1-1.2:1.0: 4 ports detected
  341. [ 4.971121] usb 1-1.2.1: new full-speed USB device number 4 using xhci_hcd
  342. [ 5.186154] usb 1-1.2.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
  343. [ 5.197151] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  344. [ 5.207001] usb 1-1.2.1: Product: USB Receiver
  345. [ 5.213744] usb 1-1.2.1: Manufacturer: Logitech
  346. [ 5.259832] usbcore: registered new interface driver usbhid
  347. [ 5.267569] usbhid: USB HID core driver
  348. [ 5.282240] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:046D:C52B.0001/input/input0
  349. [ 5.352357] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.2.1/input0
  350. [ 5.367486] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:046D:C52B.0002/input/input1
  351. [ 5.386486] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:046D:C52B.0002/input/input2
  352. [ 5.407505] usb 1-1.2.2: new full-speed USB device number 5 using xhci_hcd
  353. [ 5.460578] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:046D:C52B.0002/input/input3
  354. [ 5.484461] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.2.1/input1
  355. [ 5.500175] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.2.1/input2
  356. [ 5.588288] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.2.1/input2
  357. [ 5.611678] usb 1-1.2.2: New USB device found, idVendor=04d9, idProduct=0132, bcdDevice= 1.10
  358. [ 5.621978] usb 1-1.2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
  359. [ 5.631380] usb 1-1.2.2: Product: USB Keyboard
  360. [ 5.637669] usb 1-1.2.2: SerialNumber: 000000000008
  361. [ 5.652974] input: USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:04D9:0132.0004/input/input5
  362. [ 5.722520] hid-generic 0003:04D9:0132.0004: input,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:01:00.0-1.2.2/input0
  363. [ 5.737895] input: Logitech Wireless Device PID:101b Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input6
  364. [ 5.762435] hid-generic 0003:046D:101B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Device PID:101b] on usb-0000:01:00.0-1.2.1/input2:1
  365. [ 5.778584] hid-generic 0003:04D9:0132.0006: hiddev1,hidraw3: USB HID v1.11 Device [USB Keyboard] on usb-0000:01:00.0-1.2.2/input1
  366. [ 5.797036] input: USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.2/0003:04D9:0132.0007/input/input10
  367. [ 5.831483] input: Logitech M705 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input14
  368. [ 5.876338] input: USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.2/0003:04D9:0132.0007/input/input11
  369. [ 5.876599] logitech-hidpp-device 0003:046D:101B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M705] on usb-0000:01:00.0-1.2.1/input2:1
  370. [ 5.878483] input: USB Keyboard Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.2/0003:04D9:0132.0007/input/input12
  371. [ 5.929136] input: USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.2/0003:04D9:0132.0007/input/input13
  372. [ 5.947186] hid-generic 0003:04D9:0132.0007: input,hidraw4: USB HID v1.11 Mouse [USB Keyboard] on usb-0000:01:00.0-1.2.2/input2
  373. [ 6.277095] raid6: neonx8 gen() 3454 MB/s
  374. [ 6.300094] raid6: neonx4 gen() 4015 MB/s
  375. [ 6.323079] raid6: neonx2 gen() 3272 MB/s
  376. [ 6.346083] raid6: neonx1 gen() 2421 MB/s
  377. [ 6.369080] raid6: int64x8 gen() 2532 MB/s
  378. [ 6.392077] raid6: int64x4 gen() 2516 MB/s
  379. [ 6.415072] raid6: int64x2 gen() 2373 MB/s
  380. [ 6.438084] raid6: int64x1 gen() 1817 MB/s
  381. [ 6.444235] raid6: using algorithm neonx4 gen() 4015 MB/s
  382. [ 6.468074] raid6: .... xor() 2715 MB/s, rmw enabled
  383. [ 6.474977] raid6: using neon recovery algorithm
  384. [ 6.485781] xor: measuring software checksum speed
  385. [ 6.493891] 8regs : 7252 MB/sec
  386. [ 6.501406] 32regs : 7809 MB/sec
  387. [ 6.510977] arm64_neon : 3009 MB/sec
  388. [ 6.517208] xor: using function: 32regs (7809 MB/sec)
  389. [ 6.526369] async_tx: api initialized (async)
  390. [ 6.786292] Btrfs loaded, zoned=yes, fsverity=no
  391.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!