API tools faq
paste
pottzie

Untitled

pottzie
Mar 31st, 2011
366
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.48 KB | None | 0 0
raw download clone embed print report
  1. [ 0.742717] console [netcon0] enabled
  2. [ 0.743090] netconsole: network logging started
  3. [ 0.743613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  4. [ 0.751961] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
  5. [ 0.752246] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
  6. [ 0.752605] alloc irq_desc for 21 on node 0
  7. [ 0.752607] alloc kstat_irqs on node 0
  8. [ 0.752613] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 21 (level, high) -> IRQ 21
  9. [ 0.753315] ehci_hcd 0000:00:02.2: setting latency timer to 64
  10. [ 0.753318] ehci_hcd 0000:00:02.2: EHCI Host Controller
  11. [ 0.753696] drivers/usb/core/inode.c: creating file 'devices'
  12. [ 0.753700] drivers/usb/core/inode.c: creating file '001'
  13. [ 0.753757] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
  14. [ 0.754450] ehci_hcd 0000:00:02.2: reset hcs_params 0x102488 dbg=1 cc=2 pcc=4 !ppc ports=8
  15. [ 0.754457] ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 1 0
  16. [ 0.754461] ehci_hcd 0000:00:02.2: reset hcc_params a082 caching frame 256/512/1024
  17. [ 0.754491] ehci_hcd 0000:00:02.2: debug port 1
  18. [ 0.754849] ehci_hcd 0000:00:02.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
  19. [ 0.754855] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
  20. [ 0.754858] ehci_hcd 0000:00:02.2: supports USB remote wakeup
  21. [ 0.754871] ehci_hcd 0000:00:02.2: irq 21, io mem 0xfe02d000
  22. [ 0.755240] ehci_hcd 0000:00:02.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
  23. [ 0.755245] ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
  24. [ 0.761017] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
  25. [ 0.761411] usb usb1: default language 0x0409
  26. [ 0.761417] usb usb1: udev 1, busnum 1, minor = 0
  27. [ 0.761419] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  28. [ 0.761779] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  29. [ 0.762463] usb usb1: Product: EHCI Host Controller
  30. [ 0.762819] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r12 ehci_hcd
  31. [ 0.763186] usb usb1: SerialNumber: 0000:00:02.2
  32. [ 0.763608] usb usb1: usb_probe_device
  33. [ 0.763612] usb usb1: configuration #1 chosen from 1 choice
  34. [ 0.763620] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  35. [ 0.763666] hub 1-0:1.0: usb_probe_interface
  36. [ 0.763669] hub 1-0:1.0: usb_probe_interface - got id
  37. [ 0.763671] hub 1-0:1.0: USB hub found
  38. [ 0.764042] hub 1-0:1.0: 8 ports detected
  39. [ 0.764397] hub 1-0:1.0: standalone hub
  40. [ 0.764399] hub 1-0:1.0: no power switching (usb 1.0)
  41. [ 0.764400] hub 1-0:1.0: individual port over-current protection
  42. [ 0.764403] hub 1-0:1.0: power on to power good time: 20ms
  43. [ 0.764408] hub 1-0:1.0: local power source is good
  44. [ 0.764410] hub 1-0:1.0: trying to enable port power on non-switchable hub
  45. [ 0.764438] drivers/usb/core/inode.c: creating file '001'
  46. [ 0.764503] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  47. [ 0.764861] ohci_hcd: block sizes: ed 80 td 96
  48. [ 0.765142] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
  49. [ 0.765501] alloc irq_desc for 20 on node 0
  50. [ 0.765503] alloc kstat_irqs on node 0
  51. [ 0.765508] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, high) -> IRQ 20
  52. [ 0.766200] ohci_hcd 0000:00:02.0: setting latency timer to 64
  53. [ 0.766202] ohci_hcd 0000:00:02.0: OHCI Host Controller
  54. [ 0.766562] drivers/usb/core/inode.c: creating file '002'
  55. [ 0.766619] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  56. [ 0.767322] ohci_hcd 0000:00:02.0: created debug files
  57. [ 0.767324] ohci_hcd 0000:00:02.0: supports USB remote wakeup
  58. [ 0.767337] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
  59. [ 0.820022] ohci_hcd 0000:00:02.0: OHCI controller state
  60. [ 0.820025] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
  61. [ 0.820029] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
  62. [ 0.820032] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
  63. [ 0.820036] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
  64. [ 0.820039] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
  65. [ 0.820043] ohci_hcd 0000:00:02.0: hcca frame #0003
  66. [ 0.820047] ohci_hcd 0000:00:02.0: roothub.a 01000204 POTPGT=1 NPS NDP=4(4)
  67. [ 0.820050] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
  68. [ 0.820053] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
  69. [ 0.820058] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
  70. [ 0.820061] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
  71. [ 0.820065] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
  72. [ 0.820068] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
  73. [ 0.820076] usb usb2: default language 0x0409
  74. [ 0.820082] usb usb2: udev 1, busnum 2, minor = 128
  75. [ 0.820084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  76. [ 0.820443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  77. [ 0.821127] usb usb2: Product: OHCI Host Controller
  78. [ 0.821483] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r12 ohci_hcd
  79. [ 0.821841] usb usb2: SerialNumber: 0000:00:02.0
  80. [ 0.822267] usb usb2: usb_probe_device
  81. [ 0.822269] usb usb2: configuration #1 chosen from 1 choice
  82. [ 0.822280] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  83. [ 0.822324] hub 2-0:1.0: usb_probe_interface
  84. [ 0.822326] hub 2-0:1.0: usb_probe_interface - got id
  85. [ 0.822328] hub 2-0:1.0: USB hub found
  86. [ 0.822687] hub 2-0:1.0: 4 ports detected
  87. [ 0.823053] hub 2-0:1.0: standalone hub
  88. [ 0.823055] hub 2-0:1.0: no power switching (usb 1.0)
  89. [ 0.823057] hub 2-0:1.0: global over-current protection
  90. [ 0.823059] hub 2-0:1.0: power on to power good time: 2ms
  91. [ 0.823063] hub 2-0:1.0: local power source is good
  92. [ 0.823065] hub 2-0:1.0: no over-current condition exists
  93. [ 0.823067] hub 2-0:1.0: trying to enable port power on non-switchable hub
  94. [ 0.823085] drivers/usb/core/inode.c: creating file '001'
  95. [ 0.823105] ehci_hcd 0000:00:02.2: HS companion for 0000:00:02.0
  96. [ 0.823375] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 23
  97. [ 0.823734] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 23 (level, high) -> IRQ 23
  98. [ 0.824429] ohci_hcd 0000:00:02.1: setting latency timer to 64
  99. [ 0.824431] ohci_hcd 0000:00:02.1: OHCI Host Controller
  100. [ 0.824791] drivers/usb/core/inode.c: creating file '003'
  101. [ 0.824840] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
  102. [ 0.825546] ohci_hcd 0000:00:02.1: created debug files
  103. [ 0.825548] ohci_hcd 0000:00:02.1: supports USB remote wakeup
  104. [ 0.825553] ohci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
  105. [ 0.864031] ehci_hcd 0000:00:02.2: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
  106. [ 0.864034] hub 1-0:1.0: port 7: status 0501 change 0001
  107. [ 0.878021] ohci_hcd 0000:00:02.1: OHCI controller state
  108. [ 0.878024] ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
  109. [ 0.878027] ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
  110. [ 0.878030] ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
  111. [ 0.878033] ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
  112. [ 0.878036] ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH
  113. [ 0.878040] ohci_hcd 0000:00:02.1: hcca frame #0003
  114. [ 0.878043] ohci_hcd 0000:00:02.1: roothub.a 01000204 POTPGT=1 NPS NDP=4(4)
  115. [ 0.878046] ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
  116. [ 0.878050] ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
  117. [ 0.878053] ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
  118. [ 0.878057] ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
  119. [ 0.878061] ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
  120. [ 0.878064] ohci_hcd 0000:00:02.1: roothub.portstatus [3] 0x00000100 PPS
  121. [ 0.878071] usb usb3: default language 0x0409
  122. [ 0.878077] usb usb3: udev 1, busnum 3, minor = 256
  123. [ 0.878079] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  124. [ 0.878439] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  125. [ 0.879122] usb usb3: Product: OHCI Host Controller
  126. [ 0.879479] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r12 ohci_hcd
  127. [ 0.879838] usb usb3: SerialNumber: 0000:00:02.1
  128. [ 0.880263] usb usb3: usb_probe_device
  129. [ 0.880266] usb usb3: configuration #1 chosen from 1 choice
  130. [ 0.880271] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  131. [ 0.880317] hub 3-0:1.0: usb_probe_interface
  132. [ 0.880319] hub 3-0:1.0: usb_probe_interface - got id
  133. [ 0.880321] hub 3-0:1.0: USB hub found
  134. [ 0.880679] hub 3-0:1.0: 4 ports detected
  135. [ 0.881046] hub 3-0:1.0: standalone hub
  136. [ 0.881047] hub 3-0:1.0: no power switching (usb 1.0)
  137. [ 0.881049] hub 3-0:1.0: global over-current protection
  138. [ 0.881051] hub 3-0:1.0: power on to power good time: 2ms
  139. [ 0.881055] hub 3-0:1.0: local power source is good
  140. [ 0.881057] hub 3-0:1.0: no over-current condition exists
  141. [ 0.881059] hub 3-0:1.0: trying to enable port power on non-switchable hub
  142. [ 0.881073] drivers/usb/core/inode.c: creating file '001'
  143. [ 0.881095] ehci_hcd 0000:00:02.2: HS companion for 0000:00:02.1
  144. [ 0.881142] uhci_hcd: USB Universal Host Controller Interface driver
  145. [ 0.881665] usbcore: registered new interface driver usblp
  146. [ 0.882035] Initializing USB Mass Storage driver...
  147. [ 0.882440] usbcore: registered new interface driver usb-storage
  148. [ 0.882798] USB Mass Storage support registered.
  149. [ 0.883216] usbcore: registered new interface driver libusual
  150. [ 0.883660] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  151. [ 0.886819] serio: i8042 KBD port at 0x60,0x64 irq 1
  152. [ 0.887192] serio: i8042 AUX port at 0x60,0x64 irq 12
  153. [ 0.887703] mice: PS/2 mouse device common for all mice
  154. [ 0.888293] rtc_cmos 00:05: RTC can wake from S4
  155. [ 0.888718] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  156. [ 0.889115] rtc0: alarms up to one year, y3k, 242 bytes nvram
  157. [ 0.889807] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
  158. [ 0.890586] cpuidle: using governor ladder
  159. [ 0.890942] cpuidle: using governor menu
  160. [ 0.892483] usbcore: registered new interface driver hiddev
  161. [ 0.892894] usbcore: registered new interface driver usbhid
  162. [ 0.893291] usbhid: USB HID core driver
  163. [ 0.893856] Netfilter messages via NETLINK v0.30.
  164. [ 0.894252] nf_conntrack version 0.5.0 (3929 buckets, 15716 max)
  165. [ 0.894780] ctnetlink v0.93: registering with nfnetlink.
  166. [ 0.895568] ip_tables: (C) 2000-2006 Netfilter Core Team
  167. [ 0.895967] TCP cubic registered
  168. [ 0.896331] Initializing XFRM netlink socket
  169. [ 0.896964] NET: Registered protocol family 10
  170. [ 0.897930] ip6_tables: (C) 2000-2006 Netfilter Core Team
  171. [ 0.898344] IPv6 over IPv4 tunneling driver
  172. [ 0.899216] NET: Registered protocol family 17
  173. [ 0.899599] lib80211: common routines for IEEE802.11 drivers
  174. [ 0.899957] lib80211_crypt: registered algorithm 'NULL'
  175. [ 0.900195] PM: Resume from disk failed.
  176. [ 0.900209] registered taskstats version 1
  177. [ 0.900742] Magic number: 3:516:147
  178. [ 0.901175] acpi device:18: hash matches
  179. [ 0.915651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  180. [ 0.923034] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
  181. [ 0.964022] hub 1-0:1.0: state 7 ports 8 chg 0080 evt 0000
  182. [ 0.964030] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
  183. [ 1.015256] ehci_hcd 0000:00:02.2: port 7 high speed
  184. [ 1.015261] ehci_hcd 0000:00:02.2: GetStatus port 7 status 001005 POWER sig=se0 PE CONNECT
  185. [ 1.042024] ata1: SATA link down (SStatus 0 SControl 300)
  186. [ 1.066020] usb 1-7: new high speed USB device using ehci_hcd and address 2
  187. [ 1.117223] ehci_hcd 0000:00:02.2: port 7 high speed
  188. [ 1.117227] ehci_hcd 0000:00:02.2: GetStatus port 7 status 001005 POWER sig=se0 PE CONNECT
  189. [ 1.180451] usb 1-7: default language 0x0409
  190. [ 1.180575] usb 1-7: udev 2, busnum 1, minor = 1
  191. [ 1.180578] usb 1-7: New USB device found, idVendor=1a40, idProduct=0101
  192. [ 1.180938] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  193. [ 1.181306] usb 1-7: Product: USB 2.0 Hub
  194. [ 1.181730] usb 1-7: usb_probe_device
  195. [ 1.181734] usb 1-7: configuration #1 chosen from 1 choice
  196. [ 1.181825] usb 1-7: adding 1-7:1.0 (config #1, interface 0)
  197. [ 1.181874] hub 1-7:1.0: usb_probe_interface
  198. [ 1.181876] hub 1-7:1.0: usb_probe_interface - got id
  199. [ 1.181878] hub 1-7:1.0: USB hub found
  200. [ 1.182322] hub 1-7:1.0: 4 ports detected
  201. [ 1.182678] hub 1-7:1.0: standalone hub
  202. [ 1.182679] hub 1-7:1.0: ganged power switching
  203. [ 1.182681] hub 1-7:1.0: global over-current protection
  204. [ 1.182683] hub 1-7:1.0: Single TT
  205. [ 1.182685] hub 1-7:1.0: TT requires at most 8 FS bit times (666 ns)
  206. [ 1.182688] hub 1-7:1.0: power on to power good time: 100ms
  207. [ 1.182946] hub 1-7:1.0: local power source is good
  208. [ 1.182948] hub 1-7:1.0: no over-current condition exists
  209. [ 1.182950] hub 1-7:1.0: enabling power on all ports
  210. [ 1.183457] drivers/usb/core/inode.c: creating file '002'
  211. [ 1.183473] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
  212. [ 1.197027] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  213. [ 1.201378] ata3.00: ATA-6: MD00300-BJDW, 21.02J21, max UDMA/133
  214. [ 1.201737] ata3.00: 58633344 sectors, multi 16: LBA48
  215. [ 1.209358] ata3.00: configured for UDMA/133
  216. [ 1.283062] hub 1-7:1.0: port 1: status 0101 change 0001
  217. [ 1.283436] hub 1-7:1.0: port 3: status 0101 change 0001
  218. [ 1.345020] ata2: SATA link down (SStatus 0 SControl 300)
  219. [ 1.345506] scsi 2:0:0:0: Direct-Access ATA MD00300-BJDW 21.0 PQ: 0 ANSI: 5
  220. [ 1.346411] sd 2:0:0:0: [sda] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB)
  221. [ 1.347141] sd 2:0:0:0: [sda] Write Protect is off
  222. [ 1.347499] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  223. [ 1.347518] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  224. [ 1.348324] sda:
  225. [ 1.348526] sd 2:0:0:0: Attached scsi generic sg0 type 0
  226. [ 1.352032] sda1 sda2 sda3
  227. [ 1.357996] sd 2:0:0:0: [sda] Attached SCSI disk
  228. [ 1.383024] usb 1-7: link qh256-0001/ffff88001f01be80 start 1 [1/0 us]
  229. [ 1.383030] hub 1-7:1.0: state 7 ports 4 chg 000a evt 0000
  230. [ 1.383177] hub 1-7:1.0: port 1, status 0101, change 0000, 12 Mb/s
  231. [ 1.445177] usb 1-7.1: new high speed USB device using ehci_hcd and address 3
  232. [ 1.500945] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
  233. [ 1.607898] usb 1-7.1: default language 0x0409
  234. [ 1.652019] ata4: SATA link down (SStatus 0 SControl 300)
  235. [ 1.652399] md: Waiting for all devices to be available before autodetect
  236. [ 1.652758] md: If you don't use raid, use raid=noautodetect
  237. [ 1.653264] md: Autodetecting RAID arrays.
  238. [ 1.653620] md: Scanned 0 and added 0 devices.
  239. [ 1.653976] md: autorun ...
  240. [ 1.654340] md: ... autorun DONE.
  241. [ 1.678588] kjournald starting. Commit interval 5 seconds
  242. [ 1.678953] EXT3-fs (sda3): mounted filesystem with ordered data mode
  243. [ 1.679401] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
  244. [ 1.679778] Freeing unused kernel memory: 580k freed
  245. [ 1.680715] Write protecting the kernel read-only data: 10240k
  246. [ 1.681328] Freeing unused kernel memory: 1660k freed
  247. [ 1.683703] Freeing unused kernel memory: 2024k freed
  248. [ 1.693794] usb 1-7.1: udev 3, busnum 1, minor = 2
  249. [ 1.693797] usb 1-7.1: New USB device found, idVendor=050d, idProduct=7050
  250. [ 1.694168] usb 1-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  251. [ 1.694842] usb 1-7.1: Product: Belkin 54g USB Network Adapter
  252. [ 1.695208] usb 1-7.1: Manufacturer: Belkin
  253. [ 1.730920] usb 1-7.1: usb_probe_device
  254. [ 1.730925] usb 1-7.1: configuration #1 chosen from 1 choice
  255. [ 1.731141] usb 1-7.1: adding 1-7.1:1.0 (config #1, interface 0)
  256. [ 1.731238] drivers/usb/core/inode.c: creating file '003'
  257. [ 1.731380] hub 1-7:1.0: port 3, status 0101, change 0000, 12 Mb/s
  258. [ 1.793128] usb 1-7.3: new high speed USB device using ehci_hcd and address 4
  259. [ 1.868115] usb 1-7.3: default language 0x0409
  260. [ 1.869241] usb 1-7.3: udev 4, busnum 1, minor = 3
  261. [ 1.869243] usb 1-7.3: New USB device found, idVendor=058f, idProduct=6366
  262. [ 1.869603] usb 1-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  263. [ 1.870287] usb 1-7.3: Product: Mass Storage Device
  264. [ 1.870643] usb 1-7.3: Manufacturer: Generic
  265. [ 1.870999] usb 1-7.3: SerialNumber: 058F63666471
  266. [ 1.871434] usb 1-7.3: usb_probe_device
  267. [ 1.871437] usb 1-7.3: configuration #1 chosen from 1 choice
  268. [ 1.871613] usb 1-7.3: adding 1-7.3:1.0 (config #1, interface 0)
  269. [ 1.871662] usb-storage 1-7.3:1.0: usb_probe_interface
  270. [ 1.871668] usb-storage 1-7.3:1.0: usb_probe_interface - got id
  271. [ 1.871728] scsi4 : usb-storage 1-7.3:1.0
  272. [ 1.872234] drivers/usb/core/inode.c: creating file '004'
  273. [ 1.872248] hub 1-7:1.0: state 7 ports 4 chg 0000 evt 0008
  274. [ 1.954016] ohci_hcd 0000:00:02.0: auto-stop root hub
  275. [ 1.954024] ohci_hcd 0000:00:02.1: auto-stop root hub
  276. [ 2.493253] cat used greatest stack depth: 4712 bytes left
  277. [ 2.565918] gzip used greatest stack depth: 4344 bytes left
  278. [ 2.629149] init-early.sh used greatest stack depth: 4072 bytes left
  279. [ 2.872759] scsi 4:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
  280. [ 2.873818] sd 4:0:0:0: Attached scsi generic sg1 type 0
  281. [ 2.875736] sd 4:0:0:0: [sdb] Attached SCSI removable disk
  282. [ 4.429392] udev[906]: starting version 164
  283. [ 4.778044] rt73usb 1-7.1:1.0: usb_probe_interface
  284. [ 4.778049] rt73usb 1-7.1:1.0: usb_probe_interface - got id
  285. [ 4.804724] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
  286. [ 4.805131] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
  287. [ 4.805138] forcedeth 0000:00:05.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
  288. [ 4.805143] forcedeth 0000:00:05.0: setting latency timer to 64
  289. [ 4.805225] nv_probe: set workaround bit for reversed mac addr
  290. [ 5.040717] phy0 -> rt73usb_init_eeprom: Error - Invalid RT chipset detected.
  291. [ 5.040724] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
  292. [ 5.040785] usbcore: registered new interface driver rt73usb
  293. [ 5.111717] rt2500usb 1-7.1:1.0: usb_probe_interface
  294. [ 5.111722] rt2500usb 1-7.1:1.0: usb_probe_interface - got id
  295. [ 5.223952] phy1: Selected rate control algorithm 'minstrel'
  296. [ 5.224574] Registered led device: rt2500usb-phy1::radio
  297. [ 5.224593] Registered led device: rt2500usb-phy1::quality
  298. [ 5.225970] usbcore: registered new interface driver rt2500usb
  299. [ 5.317807] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:09:79:ab:28
  300. [ 5.317812] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
  301. [ 5.635249] usbcore: registered new interface driver p54usb
  302. [ 5.638516] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
  303. [ 5.638524] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 21 (level, high) -> IRQ 21
  304. [ 5.638558] Intel ICH 0000:00:06.0: setting latency timer to 64
  305. [ 5.952025] intel8x0_measure_ac97_clock: measured 50713 usecs (2496 samples)
  306. [ 5.952029] intel8x0: clocking to 46812
  307. [ 6.592664] nvidia: module license 'NVIDIA' taints kernel.
  308. [ 6.592670] Disabling lock debugging due to kernel taint
  309. [ 7.381110] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
  310. [ 7.381117] alloc irq_desc for 16 on node 0
  311. [ 7.381119] alloc kstat_irqs on node 0
  312. [ 7.381131] nvidia 0000:01:00.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
  313. [ 7.381143] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  314. [ 7.381542] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.36 Tue Jan 18 16:56:11 PST 2011
  315. [ 9.667776] EXT3-fs (sda3): using internal journal
  316. [ 9.785589] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
  317. [ 16.880478] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  318. [ 21.599014] eth0: no IPv6 routers present
  319. [ 24.432036] wlan0: deauthenticating from 68:7f:74:07:ad:13 by local choice (reason=3)
  320. [ 24.437634] wlan0: deauthenticating from 68:7f:74:07:ad:13 by local choice (reason=3)
  321. [ 24.455623] wlan0: authenticate with 68:7f:74:07:ad:13 (try 1)
  322. [ 24.457262] wlan0: authenticated
  323. [ 24.460124] wlan0: associate with 68:7f:74:07:ad:13 (try 1)
  324. [ 24.462998] wlan0: RX AssocResp from 68:7f:74:07:ad:13 (capab=0x401 status=0 aid=3)
  325. [ 24.463013] wlan0: associated
  326. [ 24.466812] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  327. [ 32.223126] Adding 530140k swap on /dev/sda2. Priority:-1 extents:1 across:530140k
  328. [ 35.049015] wlan0: no IPv6 routers present
  329. [ 47.839062] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
  330. [ 47.839079] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
  331. [ 47.839110] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
  332. [ 389.577676] eth0: link down.
  333. [ 389.804594] ehci_hcd 0000:00:02.2: detected XactErr len 0/2448 retry 1
  334. [ 389.804627] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80
  335. [ 389.804636] ehci_hcd 0000:00:02.2: GetStatus port 7 status 001002 POWER sig=se0 CSC
  336. [ 389.804643] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s
  337. [ 389.804647] usb 1-7: USB disconnect, address 2
  338. [ 389.804649] usb 1-7.1: USB disconnect, address 3
  339. [ 389.804651] usb 1-7.1: unregistering device
  340. [ 389.804654] usb 1-7.1: usb_disable_device nuking all URBs
  341. [ 389.804662] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f600 ep1in-bulk
  342. [ 389.804665] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f780 ep1in-bulk
  343. [ 389.804668] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f000 ep1in-bulk
  344. [ 389.804671] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f1eac00 ep1in-bulk
  345. [ 389.804674] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f1ea9c0 ep1in-bulk
  346. [ 389.804676] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f1ea480 ep1in-bulk
  347. [ 389.804679] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f1eaa80 ep1in-bulk
  348. [ 389.804682] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f1ea540 ep1in-bulk
  349. [ 389.804685] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f0dfd80 ep1in-bulk
  350. [ 389.804688] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f0df780 ep1in-bulk
  351. [ 389.804690] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f0df3c0 ep1in-bulk
  352. [ 389.804693] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f0dfe40 ep1in-bulk
  353. [ 389.804696] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f0dff00 ep1in-bulk
  354. [ 389.804699] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f0dfa80 ep1in-bulk
  355. [ 389.804702] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01fc00 ep1in-bulk
  356. [ 389.804704] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f900 ep1in-bulk
  357. [ 389.804707] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f840 ep1in-bulk
  358. [ 389.804710] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01ff00 ep1in-bulk
  359. [ 389.804713] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f240 ep1in-bulk
  360. [ 389.804716] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f300 ep1in-bulk
  361. [ 389.804719] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f0c0 ep1in-bulk
  362. [ 389.804721] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01fb40 ep1in-bulk
  363. [ 389.804724] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01f9c0 ep1in-bulk
  364. [ 389.804727] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f01fa80 ep1in-bulk
  365. [ 389.804742] usb 1-7.1: unregistering interface 1-7.1:1.0
  366. [ 389.804874] wlan0: deauthenticating from 68:7f:74:07:ad:13 by local choice (reason=3)
  367. [ 389.805337] cfg80211: Calling CRDA to update world regulatory domain
  368. [ 390.056231] usb 1-7.3: USB disconnect, address 4
  369. [ 390.056234] usb 1-7.3: unregistering device
  370. [ 390.056237] usb 1-7.3: usb_disable_device nuking all URBs
  371. [ 390.056245] usb 1-7.3: unregistering interface 1-7.3:1.0
  372. [ 390.059118] usb 1-7: unregistering device
  373. [ 390.059121] usb 1-7: usb_disable_device nuking all URBs
  374. [ 390.059131] usb 1-7: unlink qh256-0001/ffff88001f01be80 start 1 [1/0 us]
  375. [ 390.059196] ehci_hcd 0000:00:02.2: shutdown urb ffff88001f06ad80 ep1in-intr
  376. [ 390.059199] usb 1-7: unregistering interface 1-7:1.0
  377. [ 390.059272] ehci_hcd 0000:00:02.2: GetStatus port 7 status 001002 POWER sig=se0 CSC
  378. [ 390.163038] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100
  379. [ 390.163046] hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
  380. [ 390.418389] eth0: no link during initialization.
  381. [ 390.418791] ADDRCONF(NETDEV_UP): eth0: link is not ready
  382. [ 390.457406] eth0: no link during initialization.
  383. [ 390.457806] ADDRCONF(NETDEV_UP): eth0: link is not ready
  384. [ 693.550405] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
  385. [ 693.550419] ehci_hcd 0000:00:02.2: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
  386. [ 693.550427] hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
  387. [ 693.654022] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
  388. [ 693.705259] ehci_hcd 0000:00:02.2: port 4 high speed
  389. [ 693.705265] ehci_hcd 0000:00:02.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
  390. [ 693.756026] usb 1-4: new high speed USB device using ehci_hcd and address 5
  391. [ 693.807225] ehci_hcd 0000:00:02.2: port 4 high speed
  392. [ 693.807230] ehci_hcd 0000:00:02.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
  393. [ 693.870487] usb 1-4: default language 0x0409
  394. [ 693.870607] usb 1-4: udev 5, busnum 1, minor = 4
  395. [ 693.870609] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
  396. [ 693.870612] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  397. [ 693.870615] usb 1-4: Product: USB 2.0 Hub
  398. [ 693.870704] usb 1-4: usb_probe_device
  399. [ 693.870709] usb 1-4: configuration #1 chosen from 1 choice
  400. [ 693.871613] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
  401. [ 693.871645] hub 1-4:1.0: usb_probe_interface
  402. [ 693.871648] hub 1-4:1.0: usb_probe_interface - got id
  403. [ 693.871650] hub 1-4:1.0: USB hub found
  404. [ 693.871731] hub 1-4:1.0: 4 ports detected
  405. [ 693.871733] hub 1-4:1.0: standalone hub
  406. [ 693.871735] hub 1-4:1.0: ganged power switching
  407. [ 693.871737] hub 1-4:1.0: global over-current protection
  408. [ 693.871739] hub 1-4:1.0: Single TT
  409. [ 693.871741] hub 1-4:1.0: TT requires at most 8 FS bit times (666 ns)
  410. [ 693.871743] hub 1-4:1.0: power on to power good time: 100ms
  411. [ 693.871981] hub 1-4:1.0: local power source is good
  412. [ 693.871984] hub 1-4:1.0: no over-current condition exists
  413. [ 693.871986] hub 1-4:1.0: enabling power on all ports
  414. [ 693.872876] drivers/usb/core/inode.c: creating file '005'
  415. [ 693.972109] hub 1-4:1.0: port 1: status 0101 change 0001
  416. [ 693.972467] hub 1-4:1.0: port 3: status 0101 change 0001
  417. [ 694.072030] usb 1-4: link qh256-0001/ffff880003423080 start 2 [1/0 us]
  418. [ 694.072041] hub 1-4:1.0: state 7 ports 4 chg 000a evt 0000
  419. [ 694.072086] hub 1-4:1.0: port 1, status 0101, change 0000, 12 Mb/s
  420. [ 694.134095] usb 1-4.1: new high speed USB device using ehci_hcd and address 6
  421. [ 694.296061] usb 1-4.1: default language 0x0409
  422. [ 694.382053] usb 1-4.1: udev 6, busnum 1, minor = 5
  423. [ 694.382057] usb 1-4.1: New USB device found, idVendor=050d, idProduct=7050
  424. [ 694.382060] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  425. [ 694.382063] usb 1-4.1: Product: Belkin 54g USB Network Adapter
  426. [ 694.382065] usb 1-4.1: Manufacturer: Belkin
  427. [ 694.382160] usb 1-4.1: usb_probe_device
  428. [ 694.382165] usb 1-4.1: configuration #1 chosen from 1 choice
  429. [ 694.382680] usb 1-4.1: adding 1-4.1:1.0 (config #1, interface 0)
  430. [ 694.382723] rt73usb 1-4.1:1.0: usb_probe_interface
  431. [ 694.382726] rt73usb 1-4.1:1.0: usb_probe_interface - got id
  432. [ 694.645392] phy2 -> rt73usb_init_eeprom: Error - Invalid RT chipset detected.
  433. [ 694.645398] phy2 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
  434. [ 694.645423] rt2500usb 1-4.1:1.0: usb_probe_interface
  435. [ 694.645426] rt2500usb 1-4.1:1.0: usb_probe_interface - got id
  436. [ 694.755519] phy3: Selected rate control algorithm 'minstrel'
  437. [ 694.756129] Registered led device: rt2500usb-phy3::radio
  438. [ 694.756145] Registered led device: rt2500usb-phy3::quality
  439. [ 694.756644] drivers/usb/core/inode.c: creating file '006'
  440. [ 694.761761] hub 1-4:1.0: port 3, status 0101, change 0000, 12 Mb/s
  441. [ 694.823144] usb 1-4.3: new high speed USB device using ehci_hcd and address 7
  442. [ 694.897982] usb 1-4.3: default language 0x0409
  443. [ 694.899108] usb 1-4.3: udev 7, busnum 1, minor = 6
  444. [ 694.899111] usb 1-4.3: New USB device found, idVendor=058f, idProduct=6366
  445. [ 694.899114] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  446. [ 694.899117] usb 1-4.3: Product: Mass Storage Device
  447. [ 694.899119] usb 1-4.3: Manufacturer: Generic
  448. [ 694.899120] usb 1-4.3: SerialNumber: 058F63666471
  449. [ 694.899212] usb 1-4.3: usb_probe_device
  450. [ 694.899216] usb 1-4.3: configuration #1 chosen from 1 choice
  451. [ 694.899709] usb 1-4.3: adding 1-4.3:1.0 (config #1, interface 0)
  452. [ 694.899746] usb-storage 1-4.3:1.0: usb_probe_interface
  453. [ 694.899752] usb-storage 1-4.3:1.0: usb_probe_interface - got id
  454. [ 694.901255] scsi5 : usb-storage 1-4.3:1.0
  455. [ 694.901424] drivers/usb/core/inode.c: creating file '007'
  456. [ 694.901448] hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0002
  457. [ 695.904885] scsi 5:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
  458. [ 695.905067] sd 5:0:0:0: Attached scsi generic sg1 type 0
  459. [ 695.910115] sd 5:0:0:0: [sdb] Attached SCSI removable disk
  460. [ 858.101885] eth0: link up.
  461. [ 858.101945] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  462. [ 868.381015] eth0: no IPv6 routers present
  463. [ 910.486019] eth0: no IPv6 routers present
  464. [11710.660036] eth0: link down.
  465. [11712.115925] eth0: no link during initialization.
  466. [11712.116556] ADDRCONF(NETDEV_UP): eth0: link is not ready
  467. [11712.149388] eth0: no link during initialization.
  468. [11712.149789] ADDRCONF(NETDEV_UP): eth0: link is not ready
  469. [11721.151140] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  470. [12218.975920] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  471. [12355.317357] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  472. [12446.365302] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  473. [12584.672433] eth0: link up.
  474. [12584.672488] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  475. [12595.669014] eth0: no IPv6 routers present
  476. [12671.683016] eth0: no IPv6 routers present
  477. [12745.878713] NVRM: Xid (0001:00): 6, PE0000 0208 00000148 0000fdec ff04f900 00000000
  478. [19326.874250] eth0: link down.
  479. [19328.119445] eth0: no link during initialization.
  480. [19328.119843] ADDRCONF(NETDEV_UP): eth0: link is not ready
  481. [19328.153163] eth0: no link during initialization.
  482. [19328.153561] ADDRCONF(NETDEV_UP): eth0: link is not ready
  483. [19433.924859] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  484. localhost pottzie #
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!