API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 26th, 2020
138
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.33 KB | None | 0 0
raw download clone embed print report
  1. <?xml version="1.0" encoding="UTF-8"?>
  2. <Repetier-Firmware-EEPROM>
  3. <epr pos="1028" type="0" value="1">Language</epr>
  4. <epr pos="75" type="2" value="115200">Baudrate</epr>
  5. <epr pos="129" type="3" value="1.568">Filament printed [m]</epr>
  6. <epr pos="125" type="2" value="2294">Printer active [s]</epr>
  7. <epr pos="79" type="2" value="0">Max. inactive time [ms,0=off]</epr>
  8. <epr pos="83" type="2" value="360000">Stop stepper after inactivity [ms,0=off]</epr>
  9. <epr pos="3" type="3" value="640.0000">X-axis steps per mm</epr>
  10. <epr pos="1052" type="3" value="640.0000">X2-axis steps per mm</epr>
  11. <epr pos="7" type="3" value="640.0000">Y-axis steps per mm</epr>
  12. <epr pos="11" type="3" value="4144.0000">Z-axis steps per mm</epr>
  13. <epr pos="15" type="3" value="200.000">X-axis max. feedrate [mm/s]</epr>
  14. <epr pos="19" type="3" value="200.000">Y-axis max. feedrate [mm/s]</epr>
  15. <epr pos="23" type="3" value="10.000">Z-axis max. feedrate [mm/s]</epr>
  16. <epr pos="27" type="3" value="40.000">X-axis homing feedrate [mm/s]</epr>
  17. <epr pos="31" type="3" value="40.000">Y-axis homing feedrate [mm/s]</epr>
  18. <epr pos="35" type="3" value="2.000">Z-axis homing feedrate [mm/s]</epr>
  19. <epr pos="39" type="3" value="20.000">Max. jerk [mm/s]</epr>
  20. <epr pos="47" type="3" value="1.581">Max. Z-jerk [mm/s]</epr>
  21. <epr pos="133" type="3" value="-55.000">X min pos [mm]</epr>
  22. <epr pos="137" type="3" value="0.000">Y min pos [mm]</epr>
  23. <epr pos="141" type="3" value="0.000">Z min pos [mm]</epr>
  24. <epr pos="145" type="3" value="240.000">X max length [mm]</epr>
  25. <epr pos="149" type="3" value="300.000">Y max length [mm]</epr>
  26. <epr pos="153" type="3" value="400.000">Z max length [mm]</epr>
  27. <epr pos="1056" type="3" value="0.000">Park position X [mm]</epr>
  28. <epr pos="1060" type="3" value="10.000">Park position Y [mm]</epr>
  29. <epr pos="1064" type="3" value="10.000">Park position Z raise [mm]</epr>
  30. <epr pos="51" type="3" value="1000.000">X-axis acceleration [mm/s^2]</epr>
  31. <epr pos="55" type="3" value="1000.000">Y-axis acceleration [mm/s^2]</epr>
  32. <epr pos="59" type="3" value="100.000">Z-axis acceleration [mm/s^2]</epr>
  33. <epr pos="63" type="3" value="1000.000">X-axis travel acceleration [mm/s^2]</epr>
  34. <epr pos="67" type="3" value="1000.000">Y-axis travel acceleration [mm/s^2]</epr>
  35. <epr pos="71" type="3" value="100.000">Z-axis travel acceleration [mm/s^2]</epr>
  36. <epr pos="1024" type="3" value="-0.000">Coating thickness [mm]</epr>
  37. <epr pos="808" type="3" value="1.200">Z-probe height [mm]</epr>
  38. <epr pos="929" type="3" value="10.000">Max. z-probe - bed dist. [mm]</epr>
  39. <epr pos="812" type="3" value="2.000">Z-probe speed [mm/s]</epr>
  40. <epr pos="840" type="3" value="150.000">Z-probe x-y-speed [mm/s]</epr>
  41. <epr pos="800" type="3" value="-31.000">Z-probe offset x [mm]</epr>
  42. <epr pos="804" type="3" value="-26.000">Z-probe offset y [mm]</epr>
  43. <epr pos="816" type="3" value="40.000">Z-probe X1 [mm]</epr>
  44. <epr pos="820" type="3" value="30.000">Z-probe Y1 [mm]</epr>
  45. <epr pos="824" type="3" value="200.000">Z-probe X2 [mm]</epr>
  46. <epr pos="828" type="3" value="30.000">Z-probe Y2 [mm]</epr>
  47. <epr pos="832" type="3" value="40.000">Z-probe X3 [mm]</epr>
  48. <epr pos="836" type="3" value="270.000">Z-probe Y3 [mm]</epr>
  49. <epr pos="1036" type="3" value="0.000">Z-probe bending correction A [mm]</epr>
  50. <epr pos="1040" type="3" value="0.000">Z-probe bending correction B [mm]</epr>
  51. <epr pos="1044" type="3" value="0.000">Z-probe bending correction C [mm]</epr>
  52. <epr pos="880" type="0" value="1">Autolevel active (1/0)</epr>
  53. <epr pos="1048" type="1" value="-1">Bed Preheat temp. [degC]</epr>
  54. <epr pos="106" type="0" value="0">Bed Heat Manager [0-3]</epr>
  55. <epr pos="107" type="0" value="255">Bed PID drive max</epr>
  56. <epr pos="124" type="0" value="80">Bed PID drive min</epr>
  57. <epr pos="108" type="3" value="196.000">Bed PID P-gain</epr>
  58. <epr pos="112" type="3" value="33.000">Bed PID I-gain</epr>
  59. <epr pos="116" type="3" value="290.000">Bed PID D-gain</epr>
  60. <epr pos="120" type="0" value="255">Bed PID max value [0-255]</epr>
  61. <epr pos="1020" type="0" value="0">Enable retraction conversion [0/1]</epr>
  62. <epr pos="992" type="3" value="3.000">Retraction length [mm]</epr>
  63. <epr pos="996" type="3" value="13.000">Retraction length extruder switch [mm]</epr>
  64. <epr pos="1000" type="3" value="40.000">Retraction speed [mm/s]</epr>
  65. <epr pos="1004" type="3" value="0.000">Retraction z-lift [mm]</epr>
  66. <epr pos="1008" type="3" value="0.000">Extra extrusion on undo retract [mm]</epr>
  67. <epr pos="1012" type="3" value="0.000">Extra extrusion on undo switch retract [mm]</epr>
  68. <epr pos="1016" type="3" value="20.000">Retraction undo speed</epr>
  69. <epr pos="200" type="3" value="3272.000">Extr.1 steps per mm</epr>
  70. <epr pos="204" type="3" value="50.000">Extr.1 max. feedrate [mm/s]</epr>
  71. <epr pos="208" type="3" value="20.000">Extr.1 start feedrate [mm/s]</epr>
  72. <epr pos="212" type="3" value="5000.000">Extr.1 acceleration [mm/s^2]</epr>
  73. <epr pos="294" type="1" value="190">Extr.1 Preheat temp. [degC]</epr>
  74. <epr pos="216" type="0" value="3">Extr.1 heat manager [0-3]</epr>
  75. <epr pos="217" type="0" value="230">Extr.1 PID drive max</epr>
  76. <epr pos="245" type="0" value="40">Extr.1 PID drive min</epr>
  77. <epr pos="218" type="3" value="7.0000">Extr.1 PID P-gain/dead-time</epr>
  78. <epr pos="222" type="3" value="2.0000">Extr.1 PID I-gain</epr>
  79. <epr pos="226" type="3" value="40.0000">Extr.1 PID D-gain</epr>
  80. <epr pos="230" type="0" value="255">Extr.1 PID max value [0-255]</epr>
  81. <epr pos="231" type="2" value="0">Extr.1 X-offset [steps]</epr>
  82. <epr pos="235" type="2" value="0">Extr.1 Y-offset [steps]</epr>
  83. <epr pos="290" type="2" value="0">Extr.1 Z-offset [steps]</epr>
  84. <epr pos="239" type="1" value="1">Extr.1 temp. stabilize time [s]</epr>
  85. <epr pos="250" type="1" value="150">Extr.1 temp. for retraction when heating [degC]</epr>
  86. <epr pos="252" type="1" value="0">Extr.1 distance to retract when heating [mm]</epr>
  87. <epr pos="254" type="0" value="255">Extr.1 extruder cooler speed [0-255]</epr>
  88. <epr pos="300" type="3" value="3272.000">Extr.2 steps per mm</epr>
  89. <epr pos="304" type="3" value="50.000">Extr.2 max. feedrate [mm/s]</epr>
  90. <epr pos="308" type="3" value="20.000">Extr.2 start feedrate [mm/s]</epr>
  91. <epr pos="312" type="3" value="5000.000">Extr.2 acceleration [mm/s^2]</epr>
  92. <epr pos="394" type="1" value="190">Extr.2 Preheat temp. [degC]</epr>
  93. <epr pos="316" type="0" value="3">Extr.2 heat manager [0-3]</epr>
  94. <epr pos="317" type="0" value="230">Extr.2 PID drive max</epr>
  95. <epr pos="345" type="0" value="40">Extr.2 PID drive min</epr>
  96. <epr pos="318" type="3" value="7.0000">Extr.2 PID P-gain/dead-time</epr>
  97. <epr pos="322" type="3" value="2.0000">Extr.2 PID I-gain</epr>
  98. <epr pos="326" type="3" value="40.0000">Extr.2 PID D-gain</epr>
  99. <epr pos="330" type="0" value="255">Extr.2 PID max value [0-255]</epr>
  100. <epr pos="331" type="2" value="225000">Extr.2 X-offset [steps]</epr>
  101. <epr pos="335" type="2" value="0">Extr.2 Y-offset [steps]</epr>
  102. <epr pos="390" type="2" value="10000">Extr.2 Z-offset [steps]</epr>
  103. <epr pos="339" type="1" value="1">Extr.2 temp. stabilize time [s]</epr>
  104. <epr pos="350" type="1" value="150">Extr.2 temp. for retraction when heating [degC]</epr>
  105. <epr pos="352" type="1" value="0">Extr.2 distance to retract when heating [mm]</epr>
  106. <epr pos="354" type="0" value="255">Extr.2 extruder cooler speed [0-255]</epr>
  107. </Repetier-Firmware-EEPROM>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!