API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 15th, 2020
77
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.57 KB | None | 0 0
raw download clone embed print report
  1. zdorovo➜/var/log» iw list [16:14:04]
  2. Wiphy phy0
  3. max # scan SSIDs: 20
  4. max scan IEs length: 464 bytes
  5. max # sched scan SSIDs: 20
  6. max # match sets: 11
  7. max # scan plans: 2
  8. max scan plan interval: 65535
  9. max scan plan iterations: 254
  10. Retry short limit: 7
  11. Retry long limit: 4
  12. Coverage class: 0 (up to 0m)
  13. Device supports RSN-IBSS.
  14. Device supports AP-side u-APSD.
  15. Device supports T-DLS.
  16. Supported Ciphers:
  17. * WEP40 (00-0f-ac:1)
  18. * WEP104 (00-0f-ac:5)
  19. * TKIP (00-0f-ac:2)
  20. * CCMP-128 (00-0f-ac:4)
  21. * CMAC (00-0f-ac:6)
  22. Available Antennas: TX 0 RX 0
  23. Supported interface modes:
  24. * IBSS
  25. * managed
  26. * AP
  27. * AP/VLAN
  28. * monitor
  29. * P2P-client
  30. * P2P-GO
  31. * P2P-device
  32. Band 1:
  33. Bitrates (non-HT):
  34. * 1.0 Mbps
  35. * 2.0 Mbps (short preamble supported)
  36. * 5.5 Mbps (short preamble supported)
  37. * 11.0 Mbps (short preamble supported)
  38. * 6.0 Mbps
  39. * 9.0 Mbps
  40. * 12.0 Mbps
  41. * 18.0 Mbps
  42. * 24.0 Mbps
  43. * 36.0 Mbps
  44. * 48.0 Mbps
  45. * 54.0 Mbps
  46. Frequencies:
  47. * 2412 MHz [1] (22.0 dBm)
  48. * 2417 MHz [2] (22.0 dBm)
  49. * 2422 MHz [3] (22.0 dBm)
  50. * 2427 MHz [4] (22.0 dBm)
  51. * 2432 MHz [5] (22.0 dBm)
  52. * 2437 MHz [6] (22.0 dBm)
  53. * 2442 MHz [7] (22.0 dBm)
  54. * 2447 MHz [8] (22.0 dBm)
  55. * 2452 MHz [9] (22.0 dBm)
  56. * 2457 MHz [10] (22.0 dBm)
  57. * 2462 MHz [11] (22.0 dBm)
  58. * 2467 MHz [12] (22.0 dBm)
  59. * 2472 MHz [13] (22.0 dBm)
  60. * 2484 MHz [14] (disabled)
  61. Band 2:
  62. Bitrates (non-HT):
  63. * 6.0 Mbps
  64. * 9.0 Mbps
  65. * 12.0 Mbps
  66. * 18.0 Mbps
  67. * 24.0 Mbps
  68. * 36.0 Mbps
  69. * 48.0 Mbps
  70. * 54.0 Mbps
  71. Frequencies:
  72. * 5180 MHz [36] (22.0 dBm) (no IR)
  73. * 5200 MHz [40] (22.0 dBm) (no IR)
  74. * 5220 MHz [44] (22.0 dBm) (no IR)
  75. * 5240 MHz [48] (22.0 dBm) (no IR)
  76. * 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
  77. * 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
  78. * 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
  79. * 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
  80. * 5340 MHz [68] (disabled)
  81. * 5360 MHz [72] (disabled)
  82. * 5380 MHz [76] (disabled)
  83. * 5400 MHz [80] (disabled)
  84. * 5420 MHz [84] (disabled)
  85. * 5440 MHz [88] (disabled)
  86. * 5460 MHz [92] (disabled)
  87. * 5480 MHz [96] (disabled)
  88. * 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
  89. * 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
  90. * 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
  91. * 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
  92. * 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
  93. * 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
  94. * 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
  95. * 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
  96. * 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
  97. * 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
  98. * 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
  99. * 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
  100. * 5745 MHz [149] (22.0 dBm) (no IR)
  101. * 5765 MHz [153] (22.0 dBm) (no IR)
  102. * 5785 MHz [157] (22.0 dBm) (no IR)
  103. * 5805 MHz [161] (22.0 dBm) (no IR)
  104. * 5825 MHz [165] (22.0 dBm) (no IR)
  105. * 5845 MHz [169] (disabled)
  106. * 5865 MHz [173] (disabled)
  107. * 5885 MHz [177] (disabled)
  108. * 5905 MHz [181] (disabled)
  109. Supported commands:
  110. * new_interface
  111. * set_interface
  112. * new_key
  113. * start_ap
  114. * new_station
  115. * new_mpath
  116. * set_mesh_config
  117. * set_bss
  118. * authenticate
  119. * associate
  120. * deauthenticate
  121. * disassociate
  122. * join_ibss
  123. * join_mesh
  124. * remain_on_channel
  125. * set_tx_bitrate_mask
  126. * frame
  127. * frame_wait_cancel
  128. * set_wiphy_netns
  129. * set_channel
  130. * set_wds_peer
  131. * tdls_mgmt
  132. * tdls_oper
  133. * start_sched_scan
  134. * probe_client
  135. * set_noack_map
  136. * register_beacons
  137. * start_p2p_device
  138. * set_mcast_rate
  139. * connect
  140. * disconnect
  141. * channel_switch
  142. * set_qos_map
  143. * add_tx_ts
  144. * set_multicast_to_unicast
  145. Supported TX frame types:
  146. * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  147. * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  148. * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  149. * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  150. * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  151. * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  152. * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  153. * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  154. Supported RX frame types:
  155. * IBSS: 0x40 0xb0 0xc0 0xd0
  156. * managed: 0x40 0xd0
  157. * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  158. * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  159. * mesh point: 0xb0 0xc0 0xd0
  160. * P2P-client: 0x40 0xd0
  161. * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  162. * P2P-device: 0x40 0xd0
  163. WoWLAN support:
  164. * wake up on disconnect
  165. * wake up on magic packet
  166. * wake up on pattern match, up to 20 patterns of 16-128 bytes,
  167. maximum packet offset 0 bytes
  168. * can do GTK rekeying
  169. * wake up on GTK rekey failure
  170. * wake up on EAP identity request
  171. * wake up on 4-way handshake
  172. * wake up on rfkill release
  173. * wake up on network detection, up to 11 match sets
  174. software interface modes (can always be added):
  175. * AP/VLAN
  176. * monitor
  177. valid interface combinations:
  178. * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
  179. total <= 3, #channels <= 2
  180. HT Capability overrides:
  181. * MCS: ff ff ff ff ff ff ff ff ff ff
  182. * maximum A-MSDU length
  183. * supported channel width
  184. * short GI for 40 MHz
  185. * max A-MPDU length exponent
  186. * min MPDU start spacing
  187. Device supports TX status socket option.
  188. Device supports HT-IBSS.
  189. Device supports SAE with AUTHENTICATE command
  190. Device supports low priority scan.
  191. Device supports scan flush.
  192. Device supports per-vif TX power setting
  193. P2P GO supports CT window setting
  194. P2P GO supports opportunistic powersave setting
  195. Driver supports full state transitions for AP/GO clients
  196. Driver supports a userspace MPM
  197. Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
  198. Device adds DS IE to probe requests
  199. Device can update TPC Report IE
  200. Device supports static SMPS
  201. Device supports dynamic SMPS
  202. Device supports WMM-AC admission (TSPECs)
  203. Device supports configuring vdev MAC-addr on create.
  204. Device supports TDLS channel switching
  205. Device supports VHT-IBSS.
  206.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!