Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1CH166
- Serial Number: Z1F1QKQD
- LU WWN Device Id: 5 000c50 04f0fbde0
- Firmware Version: CC24
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 17:17:18 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 592) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 333) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 108 099 006 Pre-fail Always - 116165872
- 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 79
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 88
- 7 Seek_Error_Rate 0x000f 053 053 030 Pre-fail Always - 618502036121
- 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7334
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 492
- 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 096 096 000 Old_age Always - 4
- 188 Command_Timeout 0x0032 099 099 000 Old_age Always - 4 4 4
- 189 High_Fly_Writes 0x003a 091 091 000 Old_age Always - 9
- 190 Airflow_Temperature_Cel 0x0022 068 056 045 Old_age Always - 32 (Min/Max 28/32)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 89
- 193 Load_Cycle_Count 0x0032 090 090 000 Old_age Always - 20785
- 194 Temperature_Celsius 0x0022 032 044 000 Old_age Always - 32 (0 20 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 128
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 128
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4396h+03m+44.659s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 33380201109
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 165165254853
- SMART Error Log Version: 1
- ATA Error Count: 4
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 4 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 f8 ff ff ff 4f 00 00:12:39.411 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 00:12:39.411 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:12:39.411 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:12:39.410 IDENTIFY DEVICE
- ef 10 06 00 00 00 00 00 00:12:39.410 SET FEATURES [Enable SATA feature]
- Error 3 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 f8 ff ff ff 4f 00 00:11:39.424 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 00:11:39.424 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:11:39.424 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:11:39.423 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:11:39.423 SET FEATURES [Set transfer mode]
- Error 2 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 f8 c0 4e 45 00 00:11:17.752 READ FPDMA QUEUED
- 60 00 00 f8 bc 4e 45 00 00:11:17.684 READ FPDMA QUEUED
- 60 00 00 f8 b8 4e 45 00 00:11:17.680 READ FPDMA QUEUED
- 60 00 00 f8 b4 4e 45 00 00:11:17.680 READ FPDMA QUEUED
- 60 00 00 f8 b0 4e 45 00 00:11:17.675 READ FPDMA QUEUED
- Error 1 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 e8 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 e0 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 d8 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 d0 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 c8 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 7334 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1CH166
- Serial Number: Z1F28EWN
- LU WWN Device Id: 5 000c50 04f98bb20
- Firmware Version: CC26
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 17:17:22 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 584) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 341) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 217995928
- 3 Spin_Up_Time 0x0003 096 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 50
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 34359781401
- 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14972
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 83
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 3 3 3
- 189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
- 190 Airflow_Temperature_Cel 0x0022 068 064 045 Old_age Always - 32 (Min/Max 26/32)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 58
- 193 Load_Cycle_Count 0x0032 007 007 000 Old_age Always - 187081
- 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 20 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4185h+17m+59.079s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 6734729193
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 8599556102
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 14972 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 5K3000
- Device Model: Hitachi HDS5C3030ALA630
- Serial Number: MJ1323YNG1TJ1C
- LU WWN Device Id: 5 000cca 228c0d068
- Firmware Version: MEAOA580
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5700 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 17:17:26 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x85) Offline data collection activity
- was aborted by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (38166) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 636) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 114
- 3 Spin_Up_Time 0x0007 159 159 024 Pre-fail Always - 500 (Average 379)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3621
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 32
- 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 25433
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3456
- 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 4487
- 193 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 4487
- 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 16/42)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 25432 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1CH166
- Serial Number: Z1F1QKQD
- LU WWN Device Id: 5 000c50 04f0fbde0
- Firmware Version: CC24
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 18:36:25 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 118) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 592) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 333) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 108 099 006 Pre-fail Always - 116194944
- 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 81
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 248
- 7 Seek_Error_Rate 0x000f 052 052 030 Pre-fail Always - 773120859251
- 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7334
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 494
- 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 096 096 000 Old_age Always - 4
- 188 Command_Timeout 0x0032 099 099 000 Old_age Always - 4 4 4
- 189 High_Fly_Writes 0x003a 091 091 000 Old_age Always - 9
- 190 Airflow_Temperature_Cel 0x0022 069 056 045 Old_age Always - 31 (Min/Max 27/31)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 91
- 193 Load_Cycle_Count 0x0032 090 090 000 Old_age Always - 20790
- 194 Temperature_Celsius 0x0022 031 044 000 Old_age Always - 31 (0 20 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 144
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 144
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4396h+21m+32.249s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 33380201109
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 165165265492
- SMART Error Log Version: 1
- ATA Error Count: 4
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 4 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 f8 ff ff ff 4f 00 00:12:39.411 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 00:12:39.411 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:12:39.411 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:12:39.410 IDENTIFY DEVICE
- ef 10 06 00 00 00 00 00 00:12:39.410 SET FEATURES [Enable SATA feature]
- Error 3 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 f8 ff ff ff 4f 00 00:11:39.424 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 00:11:39.424 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:11:39.424 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:11:39.423 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:11:39.423 SET FEATURES [Set transfer mode]
- Error 2 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 f8 c0 4e 45 00 00:11:17.752 READ FPDMA QUEUED
- 60 00 00 f8 bc 4e 45 00 00:11:17.684 READ FPDMA QUEUED
- 60 00 00 f8 b8 4e 45 00 00:11:17.680 READ FPDMA QUEUED
- 60 00 00 f8 b4 4e 45 00 00:11:17.680 READ FPDMA QUEUED
- 60 00 00 f8 b0 4e 45 00 00:11:17.675 READ FPDMA QUEUED
- Error 1 occurred at disk power-on lifetime: 6284 hours (261 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 e8 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 e0 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 d8 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 d0 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- 60 00 08 c8 e0 4d 45 00 00:10:57.978 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 60% 7334 -
- # 2 Short offline Completed without error 00% 7334 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1CH166
- Serial Number: Z1F28EWN
- LU WWN Device Id: 5 000c50 04f98bb20
- Firmware Version: CC26
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 18:36:31 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 584) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 341) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 218047760
- 3 Spin_Up_Time 0x0003 096 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 51
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 34359781628
- 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14972
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 87
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 3 3 3
- 189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
- 190 Airflow_Temperature_Cel 0x0022 069 064 045 Old_age Always - 31 (Min/Max 29/31)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 62
- 193 Load_Cycle_Count 0x0032 007 007 000 Old_age Always - 187088
- 194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 20 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4185h+33m+56.019s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 6734729193
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 8599618158
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 14972 -
- # 2 Short offline Completed without error 00% 14972 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 5K3000
- Device Model: Hitachi HDS5C3030ALA630
- Serial Number: MJ1323YNG1TJ1C
- LU WWN Device Id: 5 000cca 228c0d068
- Firmware Version: MEAOA580
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5700 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 18:36:35 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (38166) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 636) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 114
- 3 Spin_Up_Time 0x0007 159 159 024 Pre-fail Always - 500 (Average 379)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3623
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 32
- 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 25433
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3458
- 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 4489
- 193 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 4489
- 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 16/42)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 25433 -
- # 2 Short offline Completed without error 00% 25432 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1CH166
- Serial Number: W1F21S49
- LU WWN Device Id: 5 000c50 05e01f4d1
- Firmware Version: CC24
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 18:36:42 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 584) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 341) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 099 096 006 Pre-fail Always - 74521533
- 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 966
- 5 Reallocated_Sector_Ct 0x0033 093 093 010 Pre-fail Always - 8560
- 7 Seek_Error_Rate 0x000f 043 037 030 Pre-fail Always - 6996536585419
- 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11965
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 527
- 183 Runtime_Bad_Block 0x0032 097 097 000 Old_age Always - 3
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 026 026 000 Old_age Always - 74
- 188 Command_Timeout 0x0032 098 098 000 Old_age Always - 8 8 8
- 189 High_Fly_Writes 0x003a 079 079 000 Old_age Always - 21
- 190 Airflow_Temperature_Cel 0x0022 069 053 045 Old_age Always - 31 (Min/Max 26/31)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 107
- 193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 45219
- 194 Temperature_Celsius 0x0022 031 047 000 Old_age Always - 31 (0 20 0 0 0)
- 197 Current_Pending_Sector 0x0012 098 060 000 Old_age Always - 392
- 198 Offline_Uncorrectable 0x0010 098 060 000 Old_age Offline - 392
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 4
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7728h+24m+12.005s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 32694053734
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 204728113120
- SMART Error Log Version: 1
- ATA Error Count: 74 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 74 occurred at disk power-on lifetime: 11965 hours (498 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 01 ff ff ff 4f 00 00:03:46.264 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:46.264 IDENTIFY DEVICE
- 2f 00 01 10 00 00 00 00 00:03:45.661 READ LOG EXT
- 60 00 01 ff ff ff 4f 00 00:03:42.794 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:42.794 IDENTIFY DEVICE
- Error 73 occurred at disk power-on lifetime: 11965 hours (498 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 01 ff ff ff 4f 00 00:03:42.794 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:42.794 IDENTIFY DEVICE
- 2f 00 01 10 00 00 00 00 00:03:42.336 READ LOG EXT
- 60 00 01 ff ff ff 4f 00 00:03:39.468 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:39.468 IDENTIFY DEVICE
- Error 72 occurred at disk power-on lifetime: 11965 hours (498 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 01 ff ff ff 4f 00 00:03:39.468 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:39.468 IDENTIFY DEVICE
- 2f 00 01 10 00 00 00 00 00:03:39.002 READ LOG EXT
- 60 00 01 ff ff ff 4f 00 00:03:36.143 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:36.142 IDENTIFY DEVICE
- Error 71 occurred at disk power-on lifetime: 11965 hours (498 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 01 ff ff ff 4f 00 00:03:36.143 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:36.142 IDENTIFY DEVICE
- 2f 00 01 10 00 00 00 00 00:03:35.685 READ LOG EXT
- 60 00 01 ff ff ff 4f 00 00:03:32.835 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:32.832 IDENTIFY DEVICE
- Error 70 occurred at disk power-on lifetime: 11965 hours (498 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 01 ff ff ff 4f 00 00:03:32.835 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00:03:32.832 IDENTIFY DEVICE
- 60 00 00 ff ff ff 4f 00 00:03:30.684 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 00:03:30.684 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 00:03:30.684 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 11965 -
- # 2 Short offline Completed: read failure 60% 11954 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1CH166
- Serial Number: Z1F1MQ97
- LU WWN Device Id: 5 000c50 04eeffd81
- Firmware Version: CC24
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Aug 20 18:36:55 2016 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 592) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 334) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 090 090 006 Pre-fail Always - 60299163
- 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 89
- 5 Reallocated_Sector_Ct 0x0033 089 089 010 Pre-fail Always - 13624
- 7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always - 12925156538
- 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 10586
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 502
- 183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 049 049 000 Old_age Always - 51
- 188 Command_Timeout 0x0032 097 097 000 Old_age Always - 5 5 5
- 189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
- 190 Airflow_Temperature_Cel 0x0022 070 048 045 Old_age Always - 30 (Min/Max 25/30)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 91
- 193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 23426
- 194 Temperature_Celsius 0x0022 030 052 000 Old_age Always - 30 (0 18 0 0 0)
- 197 Current_Pending_Sector 0x0012 088 088 000 Old_age Always - 2016
- 198 Offline_Uncorrectable 0x0010 088 088 000 Old_age Offline - 2016
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 6941h+06m+49.409s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 33163306889
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 210165914006
- SMART Error Log Version: 1
- ATA Error Count: 51 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 51 occurred at disk power-on lifetime: 10487 hours (436 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 1d+12:43:53.583 READ FPDMA QUEUED
- 60 00 60 ff ff ff 4f 00 1d+12:43:53.583 READ FPDMA QUEUED
- 61 00 02 08 00 00 40 00 1d+12:43:53.583 WRITE FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 1d+12:43:53.583 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 1d+12:43:53.583 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- Error 50 occurred at disk power-on lifetime: 10487 hours (436 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 60 ff ff ff 4f 00 1d+12:43:47.634 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 1d+12:43:47.607 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 1d+12:43:47.607 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 1d+12:43:47.607 READ FPDMA QUEUED
- 61 00 40 ff ff ff 4f 00 1d+12:43:47.606 WRITE FPDMA QUEUED
- Error 49 occurred at disk power-on lifetime: 10487 hours (436 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 40 ff ff ff 4f 00 1d+12:43:43.822 WRITE FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 1d+12:43:43.788 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 1d+12:43:43.788 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 1d+12:43:43.788 READ FPDMA QUEUED
- 61 00 02 08 00 00 40 00 1d+12:43:43.787 WRITE FPDMA QUEUED
- Error 48 occurred at disk power-on lifetime: 10487 hours (436 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 1d+12:43:40.108 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 1d+12:43:40.107 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 1d+12:43:40.107 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 1d+12:43:40.107 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 1d+12:43:40.106 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- Error 47 occurred at disk power-on lifetime: 10487 hours (436 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 1d+12:43:28.187 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 1d+12:43:28.187 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 1d+12:43:28.187 READ FPDMA QUEUED
- 61 00 02 08 00 00 40 00 1d+12:43:28.186 WRITE FPDMA QUEUED
- ef 10 02 00 00 00 a0 00 1d+12:43:28.186 SET FEATURES [Enable SATA feature]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 10586 4134218864
- # 2 Short offline Completed: read failure 90% 10494 4134218864
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement