API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 21st, 2015
576
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.88 KB | None | 0 0
raw download clone embed print report
  1. pi@raspberrypi ~ $ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0xf00
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.18.7-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015
  6. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine model: Raspberry Pi 2 Model B
  9. [ 0.000000] cma: Reserved 8 MiB at 0x3a800000
  10. [ 0.000000] Memory policy: Data cache writealloc
  11. [ 0.000000] On node 0 totalpages: 241664
  12. [ 0.000000] free_area_init_node: node 0, pgdat 80820480, node_mem_map ba093000
  13. [ 0.000000] Normal zone: 1888 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
  16. [ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
  17. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  18. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ba05d000 s12864 r8192 d24000 u45056
  19. [ 0.000000] pcpu-alloc: s12864 r8192 d24000 u45056 alloc=11*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
  22. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1632 bcm2708_fb.fbheight=1018 bcm2709.boardrev=0xa21041 bcm2709.serial=0x960e1edd smsc95xx.macaddr=B8:27:EB:0E:1E:DD bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait
  23. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  26. [ 0.000000] Memory: 940740K/966656K available (5785K kernel code, 377K rwdata, 1760K rodata, 396K init, 771K bss, 25916K reserved)
  27. [ 0.000000] Virtual kernel memory layout:
  28. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  30. [ 0.000000] vmalloc : 0xbb800000 - 0xff000000 (1080 MB)
  31. [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
  32. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  33. [ 0.000000] .text : 0x80008000 - 0x80766748 (7546 kB)
  34. [ 0.000000] .init : 0x80767000 - 0x807ca000 ( 396 kB)
  35. [ 0.000000] .data : 0x807ca000 - 0x808287ec ( 378 kB)
  36. [ 0.000000] .bss : 0x808287ec - 0x808e96d4 ( 772 kB)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Preemptible hierarchical RCU implementation.
  39. [ 0.000000] NR_IRQS:480
  40. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
  41. [ 0.000017] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
  42. [ 0.000039] Switching to timer-based delay loop, resolution 52ns
  43. [ 0.000341] Console: colour dummy device 80x30
  44. [ 0.001772] console [tty1] enabled
  45. [ 0.001824] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  46. [ 0.001907] pid_max: default: 32768 minimum: 301
  47. [ 0.002321] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  48. [ 0.002384] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. [ 0.003687] Initializing cgroup subsys memory
  50. [ 0.003775] Initializing cgroup subsys devices
  51. [ 0.003830] Initializing cgroup subsys freezer
  52. [ 0.003880] Initializing cgroup subsys net_cls
  53. [ 0.003945] Initializing cgroup subsys blkio
  54. [ 0.004058] CPU: Testing write buffer coherency: ok
  55. [ 0.004174] ftrace: allocating 19969 entries in 59 pages
  56. [ 0.053438] CPU0: update cpu_capacity 1024
  57. [ 0.053514] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  58. [ 0.053552] [bcm2709_smp_prepare_cpus] enter
  59. [ 0.053714] Setting up static identity map for 0x536c78 - 0x536cd0
  60. [ 0.113383] [bcm2709_boot_secondary] cpu:1 started (0) 16
  61. [ 0.113693] CPU1: Booted secondary processor
  62. [ 0.113701] [bcm2709_secondary_init] enter cpu:1
  63. [ 0.113756] CPU1: update cpu_capacity 1024
  64. [ 0.113765] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  65. [ 0.133371] [bcm2709_boot_secondary] cpu:2 started (0) 18
  66. [ 0.133626] CPU2: Booted secondary processor
  67. [ 0.133633] [bcm2709_secondary_init] enter cpu:2
  68. [ 0.133665] CPU2: update cpu_capacity 1024
  69. [ 0.133674] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  70. [ 0.153426] [bcm2709_boot_secondary] cpu:3 started (0) 18
  71. [ 0.153668] CPU3: Booted secondary processor
  72. [ 0.153675] [bcm2709_secondary_init] enter cpu:3
  73. [ 0.153708] CPU3: update cpu_capacity 1024
  74. [ 0.153716] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  75. [ 0.153812] Brought up 4 CPUs
  76. [ 0.153940] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  77. [ 0.153973] CPU: All CPU(s) started in SVC mode.
  78. [ 0.155028] devtmpfs: initialized
  79. [ 0.178184] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  80. [ 0.180355] pinctrl core: initialized pinctrl subsystem
  81. [ 0.183395] NET: Registered protocol family 16
  82. [ 0.189018] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  83. [ 0.213213] cpuidle: using governor ladder
  84. [ 0.243244] cpuidle: using governor menu
  85. [ 0.243643] bcm2709.uart_clock = 3000000
  86. [ 0.246422] No ATAGs?
  87. [ 0.246487] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  88. [ 0.246542] hw-breakpoint: maximum watchpoint size is 8 bytes.
  89. [ 0.246604] mailbox: Broadcom VideoCore Mailbox driver
  90. [ 0.246734] bcm2708_vcio: mailbox at f300b880
  91. [ 0.247112] bcm_power: Broadcom power driver
  92. [ 0.247150] bcm_power_open() -> 0
  93. [ 0.247176] bcm_power_request(0, 8)
  94. [ 0.747877] bcm_mailbox_read -> 00000080, 0
  95. [ 0.747908] bcm_power_request -> 0
  96. [ 0.748064] Serial: AMBA PL011 UART driver
  97. [ 0.748224] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
  98. [ 1.266712] console [ttyAMA0] enabled
  99. [ 1.336629] SCSI subsystem initialized
  100. [ 1.340649] usbcore: registered new interface driver usbfs
  101. [ 1.346315] usbcore: registered new interface driver hub
  102. [ 1.351774] usbcore: registered new device driver usb
  103. [ 1.358729] Switched to clocksource arch_sys_counter
  104. [ 1.393585] FS-Cache: Loaded
  105. [ 1.396833] CacheFiles: Loaded
  106. [ 1.412296] NET: Registered protocol family 2
  107. [ 1.417929] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  108. [ 1.425185] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  109. [ 1.431915] TCP: Hash tables configured (established 8192 bind 8192)
  110. [ 1.438390] TCP: reno registered
  111. [ 1.441679] UDP hash table entries: 512 (order: 2, 16384 bytes)
  112. [ 1.447665] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  113. [ 1.454442] NET: Registered protocol family 1
  114. [ 1.459484] RPC: Registered named UNIX socket transport module.
  115. [ 1.465427] RPC: Registered udp transport module.
  116. [ 1.470194] RPC: Registered tcp transport module.
  117. [ 1.474911] RPC: Registered tcp NFSv4.1 backchannel transport module.
  118. [ 1.482416] bcm2708_dma: DMA manager at f3007000
  119. [ 1.487225] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  120. [ 1.497191] futex hash table entries: 1024 (order: 4, 65536 bytes)
  121. [ 1.503656] audit: initializing netlink subsys (disabled)
  122. [ 1.509209] audit: type=2000 audit(1.299:1): initialized
  123. [ 1.530857] VFS: Disk quotas dquot_6.5.2
  124. [ 1.535165] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  125. [ 1.544845] FS-Cache: Netfs 'nfs' registered for caching
  126. [ 1.551249] NFS: Registering the id_resolver key type
  127. [ 1.556384] Key type id_resolver registered
  128. [ 1.560622] Key type id_legacy registered
  129. [ 1.565734] msgmni has been set to 1853
  130. [ 1.571322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  131. [ 1.578965] io scheduler noop registered
  132. [ 1.582918] io scheduler deadline registered (default)
  133. [ 1.588379] io scheduler cfq registered
  134. [ 1.594917] BCM2708FB: allocated DMA memory fac00000
  135. [ 1.599987] BCM2708FB: allocated DMA channel 0 @ f3007000
  136. [ 1.633545] Console: switching to colour frame buffer device 204x63
  137. [ 1.657603] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  138. [ 1.665407] uart-pl011 dev:f1: no DMA platform data
  139. [ 1.670978] vc-cma: Videocore CMA driver
  140. [ 1.674986] vc-cma: vc_cma_base = 0x00000000
  141. [ 1.679806] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  142. [ 1.685305] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  143. [ 1.703256] brd: module loaded
  144. [ 1.712703] loop: module loaded
  145. [ 1.716271] vchiq: vchiq_init_state: slot_zero = 0xba800000, is_master = 0
  146. [ 1.724148] Loading iSCSI transport class v2.0-870.
  147. [ 1.730180] usbcore: registered new interface driver smsc95xx
  148. [ 1.736130] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  149. [ 1.942366] Core Release: 2.80a
  150. [ 1.945586] Setting default values for core params
  151. [ 1.950553] Finished setting default values for core params
  152. [ 2.156638] Using Buffer DMA mode
  153. [ 2.160047] Periodic Transfer Interrupt Enhancement - disabled
  154. [ 2.165984] Multiprocessor Interrupt Enhancement - disabled
  155. [ 2.171678] OTG VER PARAM: 0, OTG VER FLAG: 0
  156. [ 2.176123] Dedicated Tx FIFOs mode
  157. [ 2.180063] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
  158. [ 2.190129] FIQ FSM acceleration enabled for :
  159. [ 2.190129] Non-periodic Split Transactions
  160. [ 2.190129] Periodic Split Transactions
  161. [ 2.190129] High-Speed Isochronous Endpoints
  162. [ 2.207129] dwc_otg: Microframe scheduler enabled
  163. [ 2.207203] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803e4200
  164. [ 2.213240] WARN::hcd_init_fiq:413: FIQ ASM at 0x803e455c length 36
  165. [ 2.219626] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb806000
  166. [ 2.230477] dwc_otg bcm2708_usb: DWC OTG Controller
  167. [ 2.240168] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  168. [ 2.252223] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  169. [ 2.262513] Init: Port Power? op_state=1
  170. [ 2.271154] Init: Power Port (0)
  171. [ 2.279350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  172. [ 2.290923] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  173. [ 2.302975] usb usb1: Product: DWC OTG Controller
  174. [ 2.312496] usb usb1: Manufacturer: Linux 3.18.7-v7+ dwc_otg_hcd
  175. [ 2.323319] usb usb1: SerialNumber: bcm2708_usb
  176. [ 2.333679] hub 1-0:1.0: USB hub found
  177. [ 2.342256] hub 1-0:1.0: 1 port detected
  178. [ 2.351379] dwc_otg: FIQ enabled
  179. [ 2.351394] dwc_otg: NAK holdoff enabled
  180. [ 2.351405] dwc_otg: FIQ split-transaction FSM enabled
  181. [ 2.351445] Module dwc_common_port init
  182. [ 2.351854] usbcore: registered new interface driver usb-storage
  183. [ 2.362906] mousedev: PS/2 mouse device common for all mice
  184. [ 2.373893] bcm2835-cpufreq: min=600000 max=900000
  185. [ 2.383775] sdhci: Secure Digital Host Controller Interface driver
  186. [ 2.394659] sdhci: Copyright(c) Pierre Ossman
  187. [ 2.403864] DMA channels allocated for the MMC driver
  188. [ 2.448776] Load BCM2835 MMC driver
  189. [ 2.464836] sdhci-pltfm: SDHCI platform and OF driver helper
  190. [ 2.475862] ledtrig-cpu: registered to indicate activity on CPUs
  191. [ 2.486868] hidraw: raw HID events driver (C) Jiri Kosina
  192. [ 2.497315] usbcore: registered new interface driver usbhid
  193. [ 2.508629] usbhid: USB HID core driver
  194. [ 2.518533] TCP: cubic registered
  195. [ 2.526565] Initializing XFRM netlink socket
  196. [ 2.535580] NET: Registered protocol family 17
  197. [ 2.544910] Key type dns_resolver registered
  198. [ 2.554353] Registering SWP/SWPB emulation handler
  199. [ 2.558875] Indeed it is in host mode hprt0 = 00021501
  200. [ 2.574639] registered taskstats version 1
  201. [ 2.583630] vc-sm: Videocore shared memory driver
  202. [ 2.592976] [vc_sm_connected_init]: start
  203. [ 2.602330] [vc_sm_connected_init]: end - returning 0
  204. [ 2.613410] Waiting for root device /dev/mmcblk0p6...
  205. [ 2.629832] mmc0: host does not support reading read-only switch, assuming write-enable
  206. [ 2.646960] mmc0: new high speed SDHC card at address aaaa
  207. [ 2.658074] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
  208. [ 2.670291] mmcblk0: p1 p2 < p5 p6 > p3
  209. [ 2.738897] usb 1-1: new high-speed USB device number 2 using dwc_otg
  210. [ 2.750469] Indeed it is in host mode hprt0 = 00001101
  211. [ 2.762510] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
  212. [ 2.775527] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
  213. [ 2.796935] devtmpfs: mounted
  214. [ 2.805410] Freeing unused kernel memory: 396K (80767000 - 807ca000)
  215. [ 2.959211] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  216. [ 2.971013] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  217. [ 2.984142] hub 1-1:1.0: USB hub found
  218. [ 2.992981] hub 1-1:1.0: 5 ports detected
  219. [ 3.279056] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  220. [ 3.389514] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  221. [ 3.402109] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  222. [ 3.418422] smsc95xx v1.0.4
  223. [ 3.482935] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:0e:1e:dd
  224. [ 3.579055] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  225. [ 3.899929] udevd[174]: starting version 175
  226. [ 8.689215] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0179
  227. [ 8.701560] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  228. [ 8.714357] usb 1-1.3: Product: 802.11n NIC
  229. [ 8.723966] usb 1-1.3: Manufacturer: Realtek
  230. [ 8.968863] usb 1-1.4: new low-speed USB device number 5 using dwc_otg
  231. [ 9.084080] usb 1-1.4: New USB device found, idVendor=15d9, idProduct=0a4c
  232. [ 9.096425] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  233. [ 9.109192] usb 1-1.4: Product: USB OPTICAL MOUSE
  234. [ 9.126099] input: USB OPTICAL MOUSE as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:15D9:0A4C.0001/input/input0
  235. [ 9.144100] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-bcm2708_usb-1.4/input0
  236. [ 9.238901] usb 1-1.5: new low-speed USB device number 6 using dwc_otg
  237. [ 9.386618] usb 1-1.5: New USB device found, idVendor=1c4f, idProduct=0026
  238. [ 9.399295] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  239. [ 9.413321] usb 1-1.5: Product: USB Keyboard
  240. [ 9.423376] usb 1-1.5: Manufacturer: SIGMACHIP
  241. [ 9.445489] input: SIGMACHIP USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:1C4F:0026.0002/input/input1
  242. [ 9.463819] hid-generic 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-bcm2708_usb-1.5/input0
  243. [ 9.493290] input: SIGMACHIP USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1C4F:0026.0003/input/input2
  244. [ 9.511773] hid-generic 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-bcm2708_usb-1.5/input1
  245. [ 9.640060] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
  246. [ 9.687949] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
  247. [ 9.712679] random: nonblocking pool is initialized
  248. [ 9.743454] usbcore: registered new interface driver r8188eu
  249. [ 11.263311] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
  250. [ 11.513023] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
  251. [ 15.948225] r8188eu 1-1.3:1.0: Direct firmware load for rtlwifi/rtl8188eufw.bin failed with error -2
  252. [ 15.948262] r8188eu 1-1.3:1.0: Firmware rtlwifi/rtl8188eufw.bin not available
  253. [ 15.948281] MAC Address = 00:e0:4c:81:88:0c
  254. [ 16.770644] usb 1-1.3: USB disconnect, device number 4
  255. [ 16.813293] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  256. [ 16.815479] R8188EU: ERROR indicate disassoc
  257. [ 19.890329] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
  258. [ 25.045108] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  259. [ 146.558861] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
  260. [ 151.659131] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0179
  261. [ 151.659164] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  262. [ 151.659182] usb 1-1.2: Product: 802.11n NIC
  263. [ 151.659199] usb 1-1.2: Manufacturer: Realtek
  264. [ 151.660755] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
  265. [ 151.794147] r8188eu 1-1.2:1.0: Direct firmware load for rtlwifi/rtl8188eufw.bin failed with error -2
  266. [ 151.794174] r8188eu 1-1.2:1.0: Firmware rtlwifi/rtl8188eufw.bin not available
  267. [ 151.794187] MAC Address = 00:e0:4c:81:88:0c
  268. [ 151.960123] usb 1-1.2: USB disconnect, device number 7
  269. [ 151.960544] R8188EU: ERROR indicate disassoc
  270. [ 780.248853] usb 1-1.3: new high-speed USB device number 8 using dwc_otg
  271. [ 780.366334] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5370
  272. [ 780.366360] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  273. [ 780.366378] usb 1-1.3: Product: 802.11 n WLAN
  274. [ 780.366395] usb 1-1.3: Manufacturer: Ralink
  275. [ 780.366411] usb 1-1.3: SerialNumber: 1.0
  276. [ 780.467101] cfg80211: Calling CRDA to update world regulatory domain
  277. [ 780.638880] usb 1-1.3: reset high-speed USB device number 8 using dwc_otg
  278. [ 780.749515] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  279. [ 780.770443] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  280. [ 780.792342] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  281. [ 780.794550] usbcore: registered new interface driver rt2800usb
  282. [ 780.895926] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  283. [ 780.897763] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  284. [ 782.862767] wlan0: authenticate with 08:86:3b:08:74:4e
  285. [ 782.915072] wlan0: send auth to 08:86:3b:08:74:4e (try 1/3)
  286. [ 782.916668] wlan0: authenticated
  287. [ 782.918842] wlan0: associate with 08:86:3b:08:74:4e (try 1/3)
  288. [ 782.927773] wlan0: RX AssocResp from 08:86:3b:08:74:4e (capab=0x11 status=0 aid=8)
  289. [ 782.933253] wlan0: associated
  290. [ 782.933443] cfg80211: Calling CRDA to update world regulatory domain
  291. [ 1174.538895] usb 1-1.2: new high-speed USB device number 9 using dwc_otg
  292. [ 1179.639186] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0179
  293. [ 1179.639210] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  294. [ 1179.639222] usb 1-1.2: Product: 802.11n NIC
  295. [ 1179.639234] usb 1-1.2: Manufacturer: Realtek
  296. [ 1179.641144] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
  297. [ 1179.764712] r8188eu 1-1.2:1.0: Direct firmware load for rtlwifi/rtl8188eufw.bin failed with error -2
  298. [ 1179.764738] r8188eu 1-1.2:1.0: Firmware rtlwifi/rtl8188eufw.bin not available
  299. [ 1179.764752] MAC Address = 00:e0:4c:81:88:0c
  300. [ 1179.934456] usb 1-1.2: USB disconnect, device number 9
  301. [ 1179.935022] R8188EU: ERROR indicate disassoc
  302. pi@raspberrypi ~ $ lsusb -v
  303.  
  304. Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
  305. Couldn't open device, some information will be missing
  306. Device Descriptor:
  307. bLength 18
  308. bDescriptorType 1
  309. bcdUSB 2.00
  310. bDeviceClass 9 Hub
  311. bDeviceSubClass 0 Unused
  312. bDeviceProtocol 2 TT per port
  313. bMaxPacketSize0 64
  314. idVendor 0x0424 Standard Microsystems Corp.
  315. idProduct 0x9514
  316. bcdDevice 2.00
  317. iManufacturer 0
  318. iProduct 0
  319. iSerial 0
  320. bNumConfigurations 1
  321. Configuration Descriptor:
  322. bLength 9
  323. bDescriptorType 2
  324. wTotalLength 41
  325. bNumInterfaces 1
  326. bConfigurationValue 1
  327. iConfiguration 0
  328. bmAttributes 0xe0
  329. Self Powered
  330. Remote Wakeup
  331. MaxPower 2mA
  332. Interface Descriptor:
  333. bLength 9
  334. bDescriptorType 4
  335. bInterfaceNumber 0
  336. bAlternateSetting 0
  337. bNumEndpoints 1
  338. bInterfaceClass 9 Hub
  339. bInterfaceSubClass 0 Unused
  340. bInterfaceProtocol 1 Single TT
  341. iInterface 0
  342. Endpoint Descriptor:
  343. bLength 7
  344. bDescriptorType 5
  345. bEndpointAddress 0x81 EP 1 IN
  346. bmAttributes 3
  347. Transfer Type Interrupt
  348. Synch Type None
  349. Usage Type Data
  350. wMaxPacketSize 0x0001 1x 1 bytes
  351. bInterval 12
  352. Interface Descriptor:
  353. bLength 9
  354. bDescriptorType 4
  355. bInterfaceNumber 0
  356. bAlternateSetting 1
  357. bNumEndpoints 1
  358. bInterfaceClass 9 Hub
  359. bInterfaceSubClass 0 Unused
  360. bInterfaceProtocol 2 TT per port
  361. iInterface 0
  362. Endpoint Descriptor:
  363. bLength 7
  364. bDescriptorType 5
  365. bEndpointAddress 0x81 EP 1 IN
  366. bmAttributes 3
  367. Transfer Type Interrupt
  368. Synch Type None
  369. Usage Type Data
  370. wMaxPacketSize 0x0001 1x 1 bytes
  371. bInterval 12
  372.  
  373. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  374. Couldn't open device, some information will be missing
  375. Device Descriptor:
  376. bLength 18
  377. bDescriptorType 1
  378. bcdUSB 2.00
  379. bDeviceClass 9 Hub
  380. bDeviceSubClass 0 Unused
  381. bDeviceProtocol 1 Single TT
  382. bMaxPacketSize0 64
  383. idVendor 0x1d6b Linux Foundation
  384. idProduct 0x0002 2.0 root hub
  385. bcdDevice 3.18
  386. iManufacturer 3
  387. iProduct 2
  388. iSerial 1
  389. bNumConfigurations 1
  390. Configuration Descriptor:
  391. bLength 9
  392. bDescriptorType 2
  393. wTotalLength 25
  394. bNumInterfaces 1
  395. bConfigurationValue 1
  396. iConfiguration 0
  397. bmAttributes 0xe0
  398. Self Powered
  399. Remote Wakeup
  400. MaxPower 0mA
  401. Interface Descriptor:
  402. bLength 9
  403. bDescriptorType 4
  404. bInterfaceNumber 0
  405. bAlternateSetting 0
  406. bNumEndpoints 1
  407. bInterfaceClass 9 Hub
  408. bInterfaceSubClass 0 Unused
  409. bInterfaceProtocol 0 Full speed (or root) hub
  410. iInterface 0
  411. Endpoint Descriptor:
  412. bLength 7
  413. bDescriptorType 5
  414. bEndpointAddress 0x81 EP 1 IN
  415. bmAttributes 3
  416. Transfer Type Interrupt
  417. Synch Type None
  418. Usage Type Data
  419. wMaxPacketSize 0x0004 1x 4 bytes
  420. bInterval 12
  421.  
  422. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
  423. Couldn't open device, some information will be missing
  424. Device Descriptor:
  425. bLength 18
  426. bDescriptorType 1
  427. bcdUSB 2.00
  428. bDeviceClass 255 Vendor Specific Class
  429. bDeviceSubClass 0
  430. bDeviceProtocol 1
  431. bMaxPacketSize0 64
  432. idVendor 0x0424 Standard Microsystems Corp.
  433. idProduct 0xec00
  434. bcdDevice 2.00
  435. iManufacturer 0
  436. iProduct 0
  437. iSerial 0
  438. bNumConfigurations 1
  439. Configuration Descriptor:
  440. bLength 9
  441. bDescriptorType 2
  442. wTotalLength 39
  443. bNumInterfaces 1
  444. bConfigurationValue 1
  445. iConfiguration 0
  446. bmAttributes 0xe0
  447. Self Powered
  448. Remote Wakeup
  449. MaxPower 2mA
  450. Interface Descriptor:
  451. bLength 9
  452. bDescriptorType 4
  453. bInterfaceNumber 0
  454. bAlternateSetting 0
  455. bNumEndpoints 3
  456. bInterfaceClass 255 Vendor Specific Class
  457. bInterfaceSubClass 0
  458. bInterfaceProtocol 255
  459. iInterface 0
  460. Endpoint Descriptor:
  461. bLength 7
  462. bDescriptorType 5
  463. bEndpointAddress 0x81 EP 1 IN
  464. bmAttributes 2
  465. Transfer Type Bulk
  466. Synch Type None
  467. Usage Type Data
  468. wMaxPacketSize 0x0200 1x 512 bytes
  469. bInterval 0
  470. Endpoint Descriptor:
  471. bLength 7
  472. bDescriptorType 5
  473. bEndpointAddress 0x02 EP 2 OUT
  474. bmAttributes 2
  475. Transfer Type Bulk
  476. Synch Type None
  477. Usage Type Data
  478. wMaxPacketSize 0x0200 1x 512 bytes
  479. bInterval 0
  480. Endpoint Descriptor:
  481. bLength 7
  482. bDescriptorType 5
  483. bEndpointAddress 0x83 EP 3 IN
  484. bmAttributes 3
  485. Transfer Type Interrupt
  486. Synch Type None
  487. Usage Type Data
  488. wMaxPacketSize 0x0010 1x 16 bytes
  489. bInterval 4
  490.  
  491. Bus 001 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
  492. Couldn't open device, some information will be missing
  493. Device Descriptor:
  494. bLength 18
  495. bDescriptorType 1
  496. bcdUSB 2.00
  497. bDeviceClass 0 (Defined at Interface level)
  498. bDeviceSubClass 0
  499. bDeviceProtocol 0
  500. bMaxPacketSize0 64
  501. idVendor 0x148f Ralink Technology, Corp.
  502. idProduct 0x5370 RT5370 Wireless Adapter
  503. bcdDevice 1.01
  504. iManufacturer 1
  505. iProduct 2
  506. iSerial 3
  507. bNumConfigurations 1
  508. Configuration Descriptor:
  509. bLength 9
  510. bDescriptorType 2
  511. wTotalLength 67
  512. bNumInterfaces 1
  513. bConfigurationValue 1
  514. iConfiguration 0
  515. bmAttributes 0x80
  516. (Bus Powered)
  517. MaxPower 450mA
  518. Interface Descriptor:
  519. bLength 9
  520. bDescriptorType 4
  521. bInterfaceNumber 0
  522. bAlternateSetting 0
  523. bNumEndpoints 7
  524. bInterfaceClass 255 Vendor Specific Class
  525. bInterfaceSubClass 255 Vendor Specific Subclass
  526. bInterfaceProtocol 255 Vendor Specific Protocol
  527. iInterface 5
  528. Endpoint Descriptor:
  529. bLength 7
  530. bDescriptorType 5
  531. bEndpointAddress 0x81 EP 1 IN
  532. bmAttributes 2
  533. Transfer Type Bulk
  534. Synch Type None
  535. Usage Type Data
  536. wMaxPacketSize 0x0200 1x 512 bytes
  537. bInterval 0
  538. Endpoint Descriptor:
  539. bLength 7
  540. bDescriptorType 5
  541. bEndpointAddress 0x01 EP 1 OUT
  542. bmAttributes 2
  543. Transfer Type Bulk
  544. Synch Type None
  545. Usage Type Data
  546. wMaxPacketSize 0x0200 1x 512 bytes
  547. bInterval 0
  548. Endpoint Descriptor:
  549. bLength 7
  550. bDescriptorType 5
  551. bEndpointAddress 0x02 EP 2 OUT
  552. bmAttributes 2
  553. Transfer Type Bulk
  554. Synch Type None
  555. Usage Type Data
  556. wMaxPacketSize 0x0200 1x 512 bytes
  557. bInterval 0
  558. Endpoint Descriptor:
  559. bLength 7
  560. bDescriptorType 5
  561. bEndpointAddress 0x03 EP 3 OUT
  562. bmAttributes 2
  563. Transfer Type Bulk
  564. Synch Type None
  565. Usage Type Data
  566. wMaxPacketSize 0x0200 1x 512 bytes
  567. bInterval 0
  568. Endpoint Descriptor:
  569. bLength 7
  570. bDescriptorType 5
  571. bEndpointAddress 0x04 EP 4 OUT
  572. bmAttributes 2
  573. Transfer Type Bulk
  574. Synch Type None
  575. Usage Type Data
  576. wMaxPacketSize 0x0200 1x 512 bytes
  577. bInterval 0
  578. Endpoint Descriptor:
  579. bLength 7
  580. bDescriptorType 5
  581. bEndpointAddress 0x05 EP 5 OUT
  582. bmAttributes 2
  583. Transfer Type Bulk
  584. Synch Type None
  585. Usage Type Data
  586. wMaxPacketSize 0x0200 1x 512 bytes
  587. bInterval 0
  588. Endpoint Descriptor:
  589. bLength 7
  590. bDescriptorType 5
  591. bEndpointAddress 0x06 EP 6 OUT
  592. bmAttributes 2
  593. Transfer Type Bulk
  594. Synch Type None
  595. Usage Type Data
  596. wMaxPacketSize 0x0200 1x 512 bytes
  597. bInterval 0
  598.  
  599. Bus 001 Device 005: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse
  600. Couldn't open device, some information will be missing
  601. Device Descriptor:
  602. bLength 18
  603. bDescriptorType 1
  604. bcdUSB 1.10
  605. bDeviceClass 0 (Defined at Interface level)
  606. bDeviceSubClass 0
  607. bDeviceProtocol 0
  608. bMaxPacketSize0 8
  609. idVendor 0x15d9 Trust International B.V.
  610. idProduct 0x0a4c USB+PS/2 Optical Mouse
  611. bcdDevice 1.00
  612. iManufacturer 0
  613. iProduct 1
  614. iSerial 0
  615. bNumConfigurations 1
  616. Configuration Descriptor:
  617. bLength 9
  618. bDescriptorType 2
  619. wTotalLength 34
  620. bNumInterfaces 1
  621. bConfigurationValue 1
  622. iConfiguration 0
  623. bmAttributes 0xa0
  624. (Bus Powered)
  625. Remote Wakeup
  626. MaxPower 100mA
  627. Interface Descriptor:
  628. bLength 9
  629. bDescriptorType 4
  630. bInterfaceNumber 0
  631. bAlternateSetting 0
  632. bNumEndpoints 1
  633. bInterfaceClass 3 Human Interface Device
  634. bInterfaceSubClass 1 Boot Interface Subclass
  635. bInterfaceProtocol 2 Mouse
  636. iInterface 0
  637. HID Device Descriptor:
  638. bLength 9
  639. bDescriptorType 33
  640. bcdHID 1.11
  641. bCountryCode 0 Not supported
  642. bNumDescriptors 1
  643. bDescriptorType 34 Report
  644. wDescriptorLength 64
  645. Report Descriptors:
  646. ** UNAVAILABLE **
  647. Endpoint Descriptor:
  648. bLength 7
  649. bDescriptorType 5
  650. bEndpointAddress 0x81 EP 1 IN
  651. bmAttributes 3
  652. Transfer Type Interrupt
  653. Synch Type None
  654. Usage Type Data
  655. wMaxPacketSize 0x0005 1x 5 bytes
  656. bInterval 10
  657.  
  658. Bus 001 Device 006: ID 1c4f:0026 SiGma Micro
  659. Couldn't open device, some information will be missing
  660. Device Descriptor:
  661. bLength 18
  662. bDescriptorType 1
  663. bcdUSB 1.10
  664. bDeviceClass 0 (Defined at Interface level)
  665. bDeviceSubClass 0
  666. bDeviceProtocol 0
  667. bMaxPacketSize0 8
  668. idVendor 0x1c4f SiGma Micro
  669. idProduct 0x0026
  670. bcdDevice 1.10
  671. iManufacturer 1
  672. iProduct 2
  673. iSerial 0
  674. bNumConfigurations 1
  675. Configuration Descriptor:
  676. bLength 9
  677. bDescriptorType 2
  678. wTotalLength 59
  679. bNumInterfaces 2
  680. bConfigurationValue 1
  681. iConfiguration 0
  682. bmAttributes 0xa0
  683. (Bus Powered)
  684. Remote Wakeup
  685. MaxPower 98mA
  686. Interface Descriptor:
  687. bLength 9
  688. bDescriptorType 4
  689. bInterfaceNumber 0
  690. bAlternateSetting 0
  691. bNumEndpoints 1
  692. bInterfaceClass 3 Human Interface Device
  693. bInterfaceSubClass 1 Boot Interface Subclass
  694. bInterfaceProtocol 1 Keyboard
  695. iInterface 0
  696. HID Device Descriptor:
  697. bLength 9
  698. bDescriptorType 33
  699. bcdHID 1.10
  700. bCountryCode 0 Not supported
  701. bNumDescriptors 1
  702. bDescriptorType 34 Report
  703. wDescriptorLength 54
  704. Report Descriptors:
  705. ** UNAVAILABLE **
  706. Endpoint Descriptor:
  707. bLength 7
  708. bDescriptorType 5
  709. bEndpointAddress 0x81 EP 1 IN
  710. bmAttributes 3
  711. Transfer Type Interrupt
  712. Synch Type None
  713. Usage Type Data
  714. wMaxPacketSize 0x0008 1x 8 bytes
  715. bInterval 10
  716. Interface Descriptor:
  717. bLength 9
  718. bDescriptorType 4
  719. bInterfaceNumber 1
  720. bAlternateSetting 0
  721. bNumEndpoints 1
  722. bInterfaceClass 3 Human Interface Device
  723. bInterfaceSubClass 0 No Subclass
  724. bInterfaceProtocol 0 None
  725. iInterface 0
  726. HID Device Descriptor:
  727. bLength 9
  728. bDescriptorType 33
  729. bcdHID 1.10
  730. bCountryCode 0 Not supported
  731. bNumDescriptors 1
  732. bDescriptorType 34 Report
  733. wDescriptorLength 50
  734. Report Descriptors:
  735. ** UNAVAILABLE **
  736. Endpoint Descriptor:
  737. bLength 7
  738. bDescriptorType 5
  739. bEndpointAddress 0x82 EP 2 IN
  740. bmAttributes 3
  741. Transfer Type Interrupt
  742. Synch Type None
  743. Usage Type Data
  744. wMaxPacketSize 0x0003 1x 3 bytes
  745. bInterval 10
  746. pi@raspberrypi ~ $ ifconfig -a
  747. eth0 Link encap:Ethernet HWaddr b8:27:eb:0e:1e:dd
  748. UP BROADCAST MULTICAST MTU:1500 Metric:1
  749. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  750. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  751. collisions:0 txqueuelen:1000
  752. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  753.  
  754. lo Link encap:Local Loopback
  755. inet addr:127.0.0.1 Mask:255.0.0.0
  756. UP LOOPBACK RUNNING MTU:65536 Metric:1
  757. RX packets:8 errors:0 dropped:0 overruns:0 frame:0
  758. TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
  759. collisions:0 txqueuelen:0
  760. RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB)
  761.  
  762. wlan0 Link encap:Ethernet HWaddr e8:4e:06:10:cc:58
  763. inet addr:192.168.2.13 Bcast:192.168.2.255 Mask:255.255.255.0
  764. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  765. RX packets:568 errors:0 dropped:0 overruns:0 frame:0
  766. TX packets:505 errors:0 dropped:0 overruns:0 carrier:0
  767. collisions:0 txqueuelen:1000
  768. RX bytes:355823 (347.4 KiB) TX bytes:56117 (54.8 KiB)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!