Pastebin launched a little side project called VERYVIRAL.com, check it out ;-) Want more features on Pastebin? Sign Up, it's FREE!
Guest

Untitled

By: a guest on Jul 14th, 2010  |  syntax: None  |  size: 30.85 KB  |  views: 282  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. i 0000:00:1d.0: reg 10: [mem 0xd7827800-0xd7827bff]
  2. pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  3. pci 0000:00:1d.0: PME# disabled
  4. pci 0000:00:1f.2: reg 10: [io  0x7068-0x706f]
  5. pci 0000:00:1f.2: reg 14: [io  0x7084-0x7087]
  6. pci 0000:00:1f.2: reg 18: [io  0x7060-0x7067]
  7. pci 0000:00:1f.2: reg 1c: [io  0x7080-0x7083]
  8. pci 0000:00:1f.2: reg 20: [io  0x7020-0x703f]
  9. pci 0000:00:1f.2: reg 24: [mem 0xd7827000-0xd78277ff]
  10. pci 0000:00:1f.2: PME# supported from D3hot
  11. pci 0000:00:1f.2: PME# disabled
  12. pci 0000:00:1f.3: reg 10: [mem 0xd7828000-0xd78280ff 64bit]
  13. pci 0000:00:1f.3: reg 20: [io  0x7000-0x701f]
  14. pci 0000:00:1f.6: reg 10: [mem 0xd7824000-0xd7824fff 64bit]
  15. pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
  16. pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
  17. pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
  18. pci 0000:01:00.0: reg 24: [io  0x6000-0x607f]
  19. pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
  20. pci 0000:01:00.1: reg 10: [mem 0xd1000000-0xd1003fff]
  21. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  22. pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
  23. pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd10fffff]
  24. pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
  25. pci 0000:02:00.0: reg 10: [mem 0xd6800000-0xd6801fff 64bit]
  26. pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  27. pci 0000:02:00.0: PME# disabled
  28. pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  29. pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
  30. pci 0000:00:1c.0:   bridge window [mem 0xd6800000-0xd77fffff]
  31. pci 0000:00:1c.0:   bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
  32. pci 0000:03:00.0: reg 10: [mem 0xd5800a00-0xd5800aff]
  33. pci 0000:03:00.0: supports D1 D2
  34. pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  35. pci 0000:03:00.0: PME# disabled
  36. pci 0000:03:00.1: reg 10: [mem 0xd5800900-0xd58009ff]
  37. pci 0000:03:00.1: supports D1 D2
  38. pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
  39. pci 0000:03:00.1: PME# disabled
  40. pci 0000:03:00.4: reg 10: [mem 0xd5800800-0xd58008ff]
  41. pci 0000:03:00.4: supports D1 D2
  42. pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
  43. pci 0000:03:00.4: PME# disabled
  44. pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  45. pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
  46. pci 0000:00:1c.1:   bridge window [mem 0xd5800000-0xd67fffff]
  47. pci 0000:00:1c.1:   bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
  48. pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
  49. pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
  50. pci 0000:00:1c.2:   bridge window [mem 0xd4800000-0xd57fffff]
  51. pci 0000:00:1c.2:   bridge window [mem 0xd3800000-0xd47fffff 64bit pref]
  52. pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
  53. pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
  54. pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
  55. pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  56. pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
  57. pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  58. pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  59. pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
  60. pci_bus 0000:00: on NUMA node 0
  61. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  62. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  63. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  64. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  65. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  66. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  67. \_SB_.PCI0:_OSC invalid UUID
  68. _OSC request data:1 19 1f
  69. ACPI: PCI Root Bridge [CPBG] (0000:3f)
  70. pci_bus 0000:3f: on NUMA node 0
  71. ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
  72. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  73. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  74. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
  75. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  76. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  77. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  78. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  79. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  80. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
  81. vgaarb: loaded
  82. SCSI subsystem initialized
  83. libata version 3.00 loaded.
  84. usbcore: registered new interface driver usbfs
  85. usbcore: registered new interface driver hub
  86. usbcore: registered new device driver usb
  87. raid6: int64x1   2343 MB/s
  88. raid6: int64x2   2824 MB/s
  89. raid6: int64x4   2078 MB/s
  90. raid6: int64x8   2078 MB/s
  91. raid6: sse2x1    6511 MB/s
  92. raid6: sse2x2    7605 MB/s
  93. raid6: sse2x4    8144 MB/s
  94. raid6: using algorithm sse2x4 (8144 MB/s)
  95. PCI: Using ACPI for IRQ routing
  96. PCI: pci_cache_line_size set to 64 bytes
  97. reserve RAM buffer: 0000000000094000 - 000000000009ffff
  98. reserve RAM buffer: 000000009363f000 - 0000000093ffffff
  99. reserve RAM buffer: 0000000093800000 - 0000000093ffffff
  100. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  101. hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  102. Switching to clocksource tsc
  103. pnp: PnP ACPI init
  104. ACPI: bus type pnp registered
  105. pnp: PnP ACPI: found 10 devices
  106. ACPI: ACPI bus type pnp unregistered
  107. system 00:05: [io  0x0680-0x069f] has been reserved
  108. system 00:05: [io  0x0800-0x080f] has been reserved
  109. system 00:05: [io  0x0810-0x0813] has been reserved
  110. system 00:05: [io  0xffff] has been reserved
  111. system 00:05: [io  0x0400-0x047f] has been reserved
  112. system 00:05: [io  0x0500-0x057f] has been reserved
  113. system 00:05: [io  0x164e-0x164f] has been reserved
  114. system 00:05: [io  0x2000] has been reserved
  115. system 00:05: [io  0x2004] has been reserved
  116. system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
  117. system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
  118. system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
  119. system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
  120. system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
  121. system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
  122. system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
  123. system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
  124. system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
  125. system 00:08: [mem 0xd7900000-0xd7900fff] has been reserved
  126. pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
  127. pci 0000:01:00.0: BAR 6: assigned [mem 0xd1080000-0xd10fffff pref]
  128. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  129. pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
  130. pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd10fffff]
  131. pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
  132. pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  133. pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
  134. pci 0000:00:1c.0:   bridge window [mem 0xd6800000-0xd77fffff]
  135. pci 0000:00:1c.0:   bridge window [mem 0xd1800000-0xd27fffff 64bit pref]
  136. pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  137. pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
  138. pci 0000:00:1c.1:   bridge window [mem 0xd5800000-0xd67fffff]
  139. pci 0000:00:1c.1:   bridge window [mem 0xd2800000-0xd37fffff 64bit pref]
  140. pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
  141. pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
  142. pci 0000:00:1c.2:   bridge window [mem 0xd4800000-0xd57fffff]
  143. pci 0000:00:1c.2:   bridge window [mem 0xd3800000-0xd47fffff 64bit pref]
  144. pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
  145. pci 0000:00:1e.0:   bridge window [io  disabled]
  146. pci 0000:00:1e.0:   bridge window [mem disabled]
  147. pci 0000:00:1e.0:   bridge window [mem pref disabled]
  148. pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  149. pci 0000:00:01.0: setting latency timer to 64
  150. pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  151. pci 0000:00:1c.0: setting latency timer to 64
  152. pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  153. pci 0000:00:1c.1: setting latency timer to 64
  154. pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  155. pci 0000:00:1c.2: setting latency timer to 64
  156. pci 0000:00:1e.0: setting latency timer to 64
  157. pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  158. pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  159. pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  160. pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
  161. pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
  162. pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd10fffff]
  163. pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
  164. pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
  165. pci_bus 0000:02: resource 1 [mem 0xd6800000-0xd77fffff]
  166. pci_bus 0000:02: resource 2 [mem 0xd1800000-0xd27fffff 64bit pref]
  167. pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
  168. pci_bus 0000:03: resource 1 [mem 0xd5800000-0xd67fffff]
  169. pci_bus 0000:03: resource 2 [mem 0xd2800000-0xd37fffff 64bit pref]
  170. pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
  171. pci_bus 0000:04: resource 1 [mem 0xd4800000-0xd57fffff]
  172. pci_bus 0000:04: resource 2 [mem 0xd3800000-0xd47fffff 64bit pref]
  173. pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
  174. pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
  175. pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
  176. pci_bus 0000:0c: resource 7 [mem 0xa0000000-0xfeafffff]
  177. NET: Registered protocol family 2
  178. IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
  179. TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  180. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  181. TCP: Hash tables configured (established 262144 bind 65536)
  182. TCP reno registered
  183. UDP hash table entries: 2048 (order: 4, 65536 bytes)
  184. UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  185. NET: Registered protocol family 1
  186. RPC: Registered udp transport module.
  187. RPC: Registered tcp transport module.
  188. RPC: Registered tcp NFSv4.1 backchannel transport module.
  189. pci 0000:00:02.0: Boot video device
  190. PCI: CLS 64 bytes, default 64
  191. Trying to unpack rootfs image as initramfs...
  192. Freeing initrd memory: 1708k freed
  193. PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  194. Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000
  195. software IO TLB at phys 0x5c00000 - 0x9c00000
  196. Simple Boot Flag at 0x44 set to 0x1
  197. modprobe[435]: segfault at 7fff7ca00038 ip 00007fb5df430fc2 sp 00007fff7c81e650 error 4 in ld-2.11.1.so[7fb5df42e000+20000]
  198. modprobe[437]: segfault at 7fff10600038 ip 00007fa24ec7bfc2 sp 00007fff10566500 error 4 in ld-2.11.1.so[7fa24ec79000+20000]
  199. modprobe[440]: segfault at 7fff761cd038 ip 00007f546bf2afc2 sp 00007fff7607c440 error 4 in ld-2.11.1.so[7f546bf28000+20000]
  200. alg: skcipher: Failed to load transform for ecb-aes-aesni: -2
  201. audit: initializing netlink socket (disabled)
  202. type=2000 audit(1279128395.521:1): initialized
  203. VFS: Disk quotas dquot_6.5.2
  204. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  205. ROMFS MTD (C) 2007 Red Hat, Inc.
  206. msgmni has been set to 7260
  207. alg: No test for cipher_null (cipher_null-generic)
  208. alg: No test for ecb(cipher_null) (ecb-cipher_null)
  209. alg: No test for digest_null (digest_null-generic)
  210. alg: No test for compress_null (compress_null-generic)
  211. alg: No test for fcrypt (fcrypt-generic)
  212. alg: No test for stdrng (krng)
  213. async_tx: api initialized (async)
  214. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  215. io scheduler noop registered
  216. io scheduler deadline registered
  217. io scheduler cfq registered (default)
  218. pcieport 0000:00:01.0: setting latency timer to 64
  219. pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
  220. pcieport 0000:00:1c.0: setting latency timer to 64
  221. pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
  222. pcieport 0000:00:1c.1: setting latency timer to 64
  223. pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
  224. pcieport 0000:00:1c.2: setting latency timer to 64
  225. pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
  226. pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
  227. \_SB_.PCI0:_OSC invalid UUID
  228. _OSC request data:1 0 1f
  229. pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
  230. pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
  231. pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
  232. \_SB_.PCI0:_OSC invalid UUID
  233. _OSC request data:1 0 1f
  234. pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed
  235. pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
  236. pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
  237. \_SB_.PCI0:_OSC invalid UUID
  238. _OSC request data:1 0 1f
  239. pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: ACPI _OSC failed
  240. pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
  241. pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
  242. \_SB_.PCI0:_OSC invalid UUID
  243. _OSC request data:1 0 1f
  244. pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: ACPI _OSC failed
  245. pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
  246. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  247. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  248. floppy0: no floppy controllers found
  249. brd: module loaded
  250. loop: module loaded
  251. Loading iSCSI transport class v2.0-870.
  252. ahci 0000:00:1f.2: version 3.0
  253. ahci 0000:00:1f.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  254. ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
  255. ahci: SSS flag set, parallel bus scan disabled
  256. ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl RAID mode
  257. ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part apst
  258. ahci 0000:00:1f.2: setting latency timer to 64
  259. scsi0 : ahci
  260. scsi1 : ahci
  261. scsi2 : ahci
  262. scsi3 : ahci
  263. scsi4 : ahci
  264. scsi5 : ahci
  265. ata1: SATA max UDMA/133 abar m2048@0xd7827000 port 0xd7827100 irq 28
  266. ata2: SATA max UDMA/133 abar m2048@0xd7827000 port 0xd7827180 irq 28
  267. ata3: SATA max UDMA/133 abar m2048@0xd7827000 port 0xd7827200 irq 28
  268. ata4: SATA max UDMA/133 abar m2048@0xd7827000 port 0xd7827280 irq 28
  269. ata5: SATA max UDMA/133 abar m2048@0xd7827000 port 0xd7827300 irq 28
  270. ata6: DUMMY
  271. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  272. ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  273. ehci_hcd 0000:00:1a.0: setting latency timer to 64
  274. ehci_hcd 0000:00:1a.0: EHCI Host Controller
  275. ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  276. ehci_hcd 0000:00:1a.0: debug port 2
  277. ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
  278. ehci_hcd 0000:00:1a.0: irq 23, io mem 0xd7827c00
  279. ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  280. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  281. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  282. usb usb1: Product: EHCI Host Controller
  283. usb usb1: Manufacturer: Linux 2.6.34.1 ehci_hcd
  284. usb usb1: SerialNumber: 0000:00:1a.0
  285. hub 1-0:1.0: USB hub found
  286. hub 1-0:1.0: 3 ports detected
  287. ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  288. ehci_hcd 0000:00:1d.0: setting latency timer to 64
  289. ehci_hcd 0000:00:1d.0: EHCI Host Controller
  290. ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  291. ehci_hcd 0000:00:1d.0: debug port 2
  292. ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
  293. ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd7827800
  294. ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  295. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  296. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  297. usb usb2: Product: EHCI Host Controller
  298. usb usb2: Manufacturer: Linux 2.6.34.1 ehci_hcd
  299. usb usb2: SerialNumber: 0000:00:1d.0
  300. hub 2-0:1.0: USB hub found
  301. hub 2-0:1.0: 3 ports detected
  302. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  303. uhci_hcd: USB Universal Host Controller Interface driver
  304. Initializing USB Mass Storage driver...
  305. usbcore: registered new interface driver usb-storage
  306. USB Mass Storage support registered.
  307. usbcore: registered new interface driver ums-alauda
  308. usbcore: registered new interface driver ums-cypress
  309. usbcore: registered new interface driver ums-datafab
  310. usbcore: registered new interface driver ums-freecom
  311. usbcore: registered new interface driver ums-isd200
  312. usbcore: registered new interface driver ums-jumpshot
  313. usbcore: registered new interface driver ums-karma
  314. usbcore: registered new interface driver ums-onetouch
  315. usbcore: registered new interface driver ums-sddr09
  316. usbcore: registered new interface driver ums-sddr55
  317. usbcore: registered new interface driver ums-usbat
  318. PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  319. PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  320. serio: i8042 KBD port at 0x60,0x64 irq 1
  321. mice: PS/2 mouse device common for all mice
  322. md: linear personality registered for level -1
  323. md: raid0 personality registered for level 0
  324. md: raid1 personality registered for level 1
  325. md: raid10 personality registered for level 10
  326. md: raid6 personality registered for level 6
  327. md: raid5 personality registered for level 5
  328. md: raid4 personality registered for level 4
  329. md: multipath personality registered for level -4
  330. device-mapper: uevent: version 1.0.3
  331. device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  332. cpuidle: using governor ladder
  333. cpuidle: using governor menu
  334. TCP cubic registered
  335. Initializing XFRM netlink socket
  336. NET: Registered protocol family 17
  337. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  338. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  339. ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  340. ata1.00: ATA-7: SAMSUNG MMCRE28GQDXP-MVB, VBM43S1Q, max UDMA/100
  341. ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  342. ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  343. ata1.00: configured for UDMA/100
  344. usb 1-1: new high speed USB device using ehci_hcd and address 2
  345. scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MMCRE28G VBM4 PQ: 0 ANSI: 5
  346. sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
  347. sd 0:0:0:0: [sda] Write Protect is off
  348. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  349. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  350.  sda: sda1 sda2 sda3 sda4 < >
  351. sda: p3 size 138412032 exceeds device capacity, limited to end of disk
  352. sda: p4 ignored, start 158212096 is behind the end of the disk
  353. sd 0:0:0:0: [sda] Attached SCSI disk
  354. usb 1-1: New USB device found, idVendor=8087, idProduct=0020
  355. usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  356. hub 1-1:1.0: USB hub found
  357. hub 1-1:1.0: 6 ports detected
  358. usb 2-1: new high speed USB device using ehci_hcd and address 2
  359. ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  360. ata2.00: unexpected _GTF length (8)
  361. ata2.00: ATAPI: MATSHITADVD-RAM UJ892AS, 1.20, max UDMA/100
  362. ata2.00: unexpected _GTF length (8)
  363. ata2.00: configured for UDMA/100
  364. scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ892AS  1.20 PQ: 0 ANSI: 5
  365. usb 2-1: New USB device found, idVendor=8087, idProduct=0020
  366. usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  367. hub 2-1:1.0: USB hub found
  368. hub 2-1:1.0: 8 ports detected
  369. sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  370. Uniform CD-ROM driver Revision: 3.20
  371. sr 1:0:0:0: Attached scsi CD-ROM sr0
  372. usb 1-1.2: new high speed USB device using ehci_hcd and address 3
  373. usb 1-1.2: New USB device found, idVendor=05ca, idProduct=18b7
  374. usb 1-1.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
  375. usb 1-1.2: Manufacturer: Ricoh co. Ltd.
  376. usb 1-1.5: new high speed USB device using ehci_hcd and address 4
  377. ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  378. ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  379. ata3.00: ATA-7: SAMSUNG MMCRE28GQDXP-MVB, VBM43S1Q, max UDMA/100
  380. ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  381. ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  382. ata3.00: configured for UDMA/100
  383. usb 1-1.5: New USB device found, idVendor=8086, idProduct=0186
  384. usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  385. usb 1-1.5: Product: Intel(R) Centrino(R) Advanced-N + WiMAX 6250
  386. usb 1-1.5: Manufacturer: Intel(R) Corporation
  387. scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG MMCRE28G VBM4 PQ: 0 ANSI: 5
  388. sd 2:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
  389. sd 2:0:0:0: [sdb] Write Protect is off
  390. sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  391. sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  392.  sdb:
  393. usb 2-1.2: new high speed USB device using ehci_hcd and address 3
  394.  unknown partition table
  395. sd 2:0:0:0: [sdb] Attached SCSI disk
  396. ata4: SATA link down (SStatus 0 SControl 300)
  397. usb 2-1.2: New USB device found, idVendor=058f, idProduct=6387
  398. usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  399. usb 2-1.2: Product: Mass Storage Device
  400. usb 2-1.2: Manufacturer: JetFlash
  401. usb 2-1.2: SerialNumber: J6RDQEO9
  402. scsi6 : usb-storage 2-1.2:1.0
  403. ata5: SATA link down (SStatus 0 SControl 300)
  404. registered taskstats version 1
  405. Freeing unused kernel memory: 596k freed
  406. Write protecting the kernel read-only data: 8192k
  407. Freeing unused kernel memory: 1280k freed
  408. Freeing unused kernel memory: 448k freed
  409. scsi 6:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
  410. sd 6:0:0:0: [sdc] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
  411. sd 6:0:0:0: [sdc] Write Protect is off
  412. sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
  413. sd 6:0:0:0: [sdc] Assuming drive cache: write through
  414. sd 6:0:0:0: [sdc] Assuming drive cache: write through
  415.  sdc: sdc1
  416. sd 6:0:0:0: [sdc] Assuming drive cache: write through
  417. sd 6:0:0:0: [sdc] Attached SCSI removable disk
  418. kjournald starting.  Commit interval 5 seconds
  419. EXT3-fs (sdc1): mounted filesystem with ordered data mode
  420. udev: starting version 153
  421. sd 0:0:0:0: Attached scsi generic sg0 type 0
  422. sr 1:0:0:0: Attached scsi generic sg1 type 5
  423. sd 2:0:0:0: Attached scsi generic sg2 type 0
  424. sd 6:0:0:0: Attached scsi generic sg3 type 0
  425. ACPI: WMI: Mapper loaded
  426. rtc_cmos 00:06: RTC can wake from S4
  427. rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  428. rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
  429. cfg80211: Calling CRDA to update world regulatory domain
  430. Linux video capture interface: v2.00
  431. uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b7)
  432. input: UVC Camera (05ca:18b7) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
  433. usbcore: registered new interface driver uvcvideo
  434. USB Video Class driver (v0.1.0)
  435. input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
  436. ACPI: Lid Switch [LID0]
  437. input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
  438. ACPI: Power Button [PWRB]
  439. ACPI: AC Adapter [ADP1] (on-line)
  440. cfg80211: World regulatory domain updated:
  441.     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  442.     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  443.     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  444.     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  445.     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  446.     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  447. ACPI: Battery Slot [BAT1] (battery present)
  448. Linux agpgart interface v0.103
  449. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
  450. e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
  451. e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  452. e1000e 0000:00:19.0: setting latency timer to 64
  453. e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
  454. thermal LNXTHERM:01: registered as thermal_zone0
  455. ACPI: Thermal Zone [DTS0] (67 C)
  456. iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
  457. iwlagn: Copyright(c) 2003-2010 Intel Corporation
  458. iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  459. iwlagn 0000:02:00.0: setting latency timer to 64
  460. iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 6050 Series 2x2 ABG REV=0x84
  461. iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
  462. iwlagn 0000:02:00.0: irq 30 for MSI/MSI-X
  463. iwlagn 0000:02:00.0: firmware: requesting iwlwifi-6050-4.ucode
  464. iwlagn 0000:02:00.0: request for firmware file 'iwlwifi-6050-4.ucode' failed.
  465. iwlagn 0000:02:00.0: no suitable firmware found!
  466. iwlagn 0000:02:00.0: PCI INT A disabled
  467. Monitor-Mwait will be used to enter C-1 state
  468. Monitor-Mwait will be used to enter C-2 state
  469. Monitor-Mwait will be used to enter C-3 state
  470. i2400m_usb 1-1.5:1.0: WiMAX interface wmx0 (00:1d:e1:32:28:e8) ready
  471. i2400m_usb 1-1.5:1.0: firmware: requesting i6050-fw-usb-1.5.sbcf
  472. i2400m_usb 1-1.5:1.0: fw i6050-fw-usb-1.5.sbcf: cannot load file: -2
  473. i2400m_usb 1-1.5:1.0: Could not find a usable firmware image
  474. i2400m_usb 1-1.5:1.0: cannot bootstrap device: -2
  475. [drm] Initialized drm 1.1.0 20060810
  476. sdhci: Secure Digital Host Controller Interface driver
  477. sdhci: Copyright(c) Pierre Ossman
  478. sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
  479. sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  480. sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
  481. sdhci-pci 0000:03:00.0: setting latency timer to 64
  482. Registered led device: mmc0::
  483. mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
  484. sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
  485. sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
  486. sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
  487. sdhci-pci 0000:03:00.4: setting latency timer to 64
  488. Registered led device: mmc1::
  489. mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
  490. i2400m_usb 1-1.5:1.0: cannot setup device: -2
  491. i2400m_usb: probe of 1-1.5:1.0 failed with error -2
  492. usbcore: registered new interface driver i2400m_usb
  493. 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:ba:c1:2b:c9
  494. 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
  495. 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: ffffff-0ff
  496. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  497. HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
  498. HDA Intel 0000:00:1b.0: setting latency timer to 64
  499. udev: renamed network interface eth0 to eth1
  500. hda_codec: ALC889: BIOS auto-probing.
  501. agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
  502. HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  503. hda_intel: Disable MSI for Nvidia chipset
  504. agpgart-intel 0000:00:00.0: detected 131068K stolen memory
  505. HDA Intel 0000:01:00.1: setting latency timer to 64
  506. agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
  507. i801_smbus 0000:00:1f.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
  508. ACPI: resource 0000:00:1f.3 [io  0x7000-0x701f] conflicts with ACPI region SMBI [io  0x7000-0x700f 64bit pref disabled]
  509. ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  510. i915 0000:00:02.0: power state changed by ACPI to D0
  511. i915 0000:00:02.0: power state changed by ACPI to D0
  512. i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  513. i915 0000:00:02.0: setting latency timer to 64
  514. mtrr: no more MTRRs available
  515. [drm] MTRR allocation failed.  Graphics performance may suffer.
  516. i915 0000:00:02.0: irq 31 for MSI/MSI-X
  517. [drm] set up 127M of stolen space
  518. Console: switching to colour frame buffer device 200x56
  519. fb0: inteldrmfb frame buffer device
  520. registered panic notifier
  521. acpi device:00: registered as cooling_device4
  522. input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
  523. ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  524. acpi device:05: registered as cooling_device5
  525. input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input5
  526. ACPI: Video Device [DGPU] (multi-head: yes  rom: yes  post: no)
  527. [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  528. fuse init (API version 7.13)
  529. EXT3-fs (sdc1): using internal journal
  530. ppdev: user-space parallel port driver
  531. lp: driver loaded but no devices found
  532. NET: Registered protocol family 10
  533. lo: Disabled Privacy Extensions
  534. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
  535. vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
  536. usb 2-1.5: new low speed USB device using ehci_hcd and address 4
  537. usb 2-1.5: New USB device found, idVendor=04fc, idProduct=0538
  538. usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  539. usb 2-1.5: Product: Defender 2.4GHz mouse
  540. usb 2-1.5: Manufacturer: MLK
  541. usbcore: registered new interface driver hiddev
  542. input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
  543. generic-usb 0003:04FC:0538.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.0-1.5/input0
  544. usbcore: registered new interface driver usbhid
  545. usbhid: USB HID core driver
  546. usb 2-1.5: USB disconnect, address 4
  547. e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
  548. e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
  549. ADDRCONF(NETDEV_UP): eth1: link is not ready
  550. e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
  551. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  552. eth1: no IPv6 routers present
  553. usb 2-1.5: new low speed USB device using ehci_hcd and address 5
  554. usb 2-1.5: New USB device found, idVendor=04fc, idProduct=0538
  555. usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  556. usb 2-1.5: Product: Defender 2.4GHz mouse
  557. usb 2-1.5: Manufacturer: MLK
  558. input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
  559. generic-usb 0003:04FC:0538.0002: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.0-1.5/input0
  560. usb 2-1.5: USB disconnect, address 5
  561. usb 2-1.5: new low speed USB device using ehci_hcd and address 6
  562. usb 2-1.5: New USB device found, idVendor=04fc, idProduct=0538
  563. usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  564. usb 2-1.5: Product: Defender 2.4GHz mouse
  565. usb 2-1.5: Manufacturer: MLK
  566. input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
  567. generic-usb 0003:04FC:0538.0003: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.0-1.5/input0
  568. usb 2-1.5: USB disconnect, address 6
  569. usb 2-1.5: new low speed USB device using ehci_hcd and address 7
  570. usb 2-1.5: New USB device found, idVendor=04fc, idProduct=0538
  571. usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  572. usb 2-1.5: Product: Defender 2.4GHz mouse
  573. usb 2-1.5: Manufacturer: MLK
  574. input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
  575. generic-usb 0003:04FC:0538.0004: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.0-1.5/input0
  576. usb 2-1.5: USB disconnect, address 7
  577. usb 2-1.5: new low speed USB device using ehci_hcd and address 8
  578. hub 2-1:1.0: unable to enumerate USB device on port 5
  579. usb 2-1.5: new low speed USB device using ehci_hcd and address 9
  580. usb 2-1.5: New USB device found, idVendor=04fc, idProduct=0538
  581. usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  582. usb 2-1.5: Product: Defender 2.4GHz mouse
  583. usb 2-1.5: Manufacturer: MLK
  584. input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input10
  585. generic-usb 0003:04FC:0538.0005: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.0-1.5/input0
clone this paste RAW Paste Data