API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 20th, 2011
455
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.43 KB | None | 0 0
raw download clone embed print report
  1. [ 0.196244] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  2. [ 0.196248] pci 0000:00:1d.7: PME# disabled
  3. [ 0.196359] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
  4. [ 0.196363] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
  5. [ 0.196367] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
  6. [ 0.196408] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
  7. [ 0.196414] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
  8. [ 0.196420] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
  9. [ 0.196426] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
  10. [ 0.196432] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
  11. [ 0.196468] pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]
  12. [ 0.196473] pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083]
  13. [ 0.196479] pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007]
  14. [ 0.196484] pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03]
  15. [ 0.196489] pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f]
  16. [ 0.196511] pci 0000:00:1f.2: PME# supported from D3hot
  17. [ 0.196514] pci 0000:00:1f.2: PME# disabled
  18. [ 0.196555] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
  19. [ 0.196606] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
  20. [ 0.196614] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
  21. [ 0.196623] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
  22. [ 0.196628] pci 0000:01:00.0: reg 24 io port: [0xdc00-0xdc7f]
  23. [ 0.196633] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea80000-0xfeafffff]
  24. [ 0.196694] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
  25. [ 0.196698] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff]
  26. [ 0.196702] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
  27. [ 0.196792] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
  28. [ 0.196800] pci 0000:02:00.0: reg 18 io port: [0xec00-0xec7f]
  29. [ 0.196856] pci 0000:02:00.0: PME# supported from D3hot D3cold
  30. [ 0.196861] pci 0000:02:00.0: PME# disabled
  31. [ 0.196908] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
  32. [ 0.196912] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
  33. [ 0.196960] pci 0000:00:1e.0: transparent bridge
  34. [ 0.196981] pci_bus 0000:00: on NUMA node 0
  35. [ 0.196986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  36. [ 0.197108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  37. [ 0.197194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  38. [ 0.197247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
  39. [ 0.205788] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  40. [ 0.205890] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  41. [ 0.205989] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
  42. [ 0.206087] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  43. [ 0.206185] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  44. [ 0.206287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  45. [ 0.206385] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  46. [ 0.206484] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  47. [ 0.206596] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  48. [ 0.206599] vgaarb: loaded
  49. [ 0.206704] SCSI subsystem initialized
  50. [ 0.206780] libata version 3.00 loaded.
  51. [ 0.206899] usbcore: registered new interface driver usbfs
  52. [ 0.206899] usbcore: registered new interface driver hub
  53. [ 0.206899] usbcore: registered new device driver usb
  54. [ 0.206999] ACPI: WMI: Mapper loaded
  55. [ 0.207001] PCI: Using ACPI for IRQ routing
  56. [ 0.207131] NetLabel: Initializing
  57. [ 0.207133] NetLabel: domain hash size = 128
  58. [ 0.207134] NetLabel: protocols = UNLABELED CIPSOv4
  59. [ 0.207145] NetLabel: unlabeled traffic allowed by default
  60. [ 0.207172] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  61. [ 0.207177] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  62. [ 0.212020] Switching to clocksource tsc
  63. [ 0.213848] AppArmor: AppArmor Filesystem Enabled
  64. [ 0.213863] pnp: PnP ACPI init
  65. [ 0.213874] ACPI: bus type pnp registered
  66. [ 0.217368] pnp: PnP ACPI: found 18 devices
  67. [ 0.217370] ACPI: ACPI bus type pnp unregistered
  68. [ 0.217374] PnPBIOS: Disabled by ACPI PNP
  69. [ 0.217387] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
  70. [ 0.217394] system 00:07: ioport range 0x290-0x297 has been reserved
  71. [ 0.217401] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
  72. [ 0.217403] system 00:08: ioport range 0x800-0x87f has been reserved
  73. [ 0.217406] system 00:08: ioport range 0x480-0x4bf has been reserved
  74. [ 0.217408] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
  75. [ 0.217411] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
  76. [ 0.217417] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
  77. [ 0.217422] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
  78. [ 0.217425] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
  79. [ 0.217431] system 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved
  80. [ 0.217439] system 00:11: iomem range 0x0-0x9ffff could not be reserved
  81. [ 0.217441] system 00:11: iomem range 0xc0000-0xcffff could not be reserved
  82. [ 0.217444] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
  83. [ 0.217446] system 00:11: iomem range 0x100000-0xdfffffff could not be reserved
  84. [ 0.252136] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  85. [ 0.252139] pci 0000:00:01.0: IO window: 0xd000-0xdfff
  86. [ 0.252143] pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff
  87. [ 0.252146] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
  88. [ 0.252150] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
  89. [ 0.252153] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
  90. [ 0.252158] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf41fffff
  91. [ 0.252162] pci 0000:00:1c.0: PREFETCH window: 0x000000f4200000-0x000000f43fffff
  92. [ 0.252167] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
  93. [ 0.252170] pci 0000:00:1c.1: IO window: 0xe000-0xefff
  94. [ 0.252174] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
  95. [ 0.252178] pci 0000:00:1c.1: PREFETCH window: 0x000000f4400000-0x000000f45fffff
  96. [ 0.252184] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
  97. [ 0.252186] pci 0000:00:1e.0: IO window: disabled
  98. [ 0.252190] pci 0000:00:1e.0: MEM window: disabled
  99. [ 0.252193] pci 0000:00:1e.0: PREFETCH window: disabled
  100. [ 0.252214] alloc irq_desc for 16 on node -1
  101. [ 0.252216] alloc kstat_irqs on node -1
  102. [ 0.252224] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  103. [ 0.252228] pci 0000:00:01.0: setting latency timer to 64
  104. [ 0.252235] pci 0000:00:1c.0: enabling device (0104 -> 0107)
  105. [ 0.252238] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  106. [ 0.252242] pci 0000:00:1c.0: setting latency timer to 64
  107. [ 0.252249] alloc irq_desc for 17 on node -1
  108. [ 0.252251] alloc kstat_irqs on node -1
  109. [ 0.252254] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  110. [ 0.252258] pci 0000:00:1c.1: setting latency timer to 64
  111. [ 0.252264] pci 0000:00:1e.0: setting latency timer to 64
  112. [ 0.252268] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  113. [ 0.252270] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  114. [ 0.252272] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
  115. [ 0.252275] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff]
  116. [ 0.252277] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
  117. [ 0.252279] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
  118. [ 0.252282] pci_bus 0000:03: resource 1 mem: [0xf4000000-0xf41fffff]
  119. [ 0.252284] pci_bus 0000:03: resource 2 pref mem [0xf4200000-0xf43fffff]
  120. [ 0.252286] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
  121. [ 0.252288] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
  122. [ 0.252290] pci_bus 0000:02: resource 2 pref mem [0xf4400000-0xf45fffff]
  123. [ 0.252293] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
  124. [ 0.252295] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
  125. [ 0.252330] NET: Registered protocol family 2
  126. [ 0.252424] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  127. [ 0.252731] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  128. [ 0.253235] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  129. [ 0.253479] TCP: Hash tables configured (established 131072 bind 65536)
  130. [ 0.253481] TCP reno registered
  131. [ 0.253558] NET: Registered protocol family 1
  132. [ 0.253668] pci 0000:01:00.0: Boot video device
  133. [ 0.253841] cpufreq-nforce2: No nForce2 chipset.
  134. [ 0.253864] Scanning for low memory corruption every 60 seconds
  135. [ 0.253958] audit: initializing netlink socket (disabled)
  136. [ 0.253970] type=2000 audit(1300678487.251:1): initialized
  137. [ 0.262665] highmem bounce pool size: 64 pages
  138. [ 0.262670] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  139. [ 0.264051] VFS: Disk quotas dquot_6.5.2
  140. [ 0.264102] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  141. [ 0.264607] fuse init (API version 7.13)
  142. [ 0.264682] msgmni has been set to 1650
  143. [ 0.264871] alg: No test for stdrng (krng)
  144. [ 0.264919] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  145. [ 0.264922] io scheduler noop registered
  146. [ 0.264924] io scheduler anticipatory registered
  147. [ 0.264925] io scheduler deadline registered
  148. [ 0.264959] io scheduler cfq registered (default)
  149. [ 0.265073] alloc irq_desc for 24 on node -1
  150. [ 0.265075] alloc kstat_irqs on node -1
  151. [ 0.265083] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
  152. [ 0.265089] pcieport 0000:00:01.0: setting latency timer to 64
  153. [ 0.265172] alloc irq_desc for 25 on node -1
  154. [ 0.265174] alloc kstat_irqs on node -1
  155. [ 0.265180] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
  156. [ 0.265188] pcieport 0000:00:1c.0: setting latency timer to 64
  157. [ 0.265288] alloc irq_desc for 26 on node -1
  158. [ 0.265289] alloc kstat_irqs on node -1
  159. [ 0.265296] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
  160. [ 0.265303] pcieport 0000:00:1c.1: setting latency timer to 64
  161. [ 0.265375] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  162. [ 0.265447] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  163. [ 0.265534] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  164. [ 0.265537] ACPI: Power Button [PWRB]
  165. [ 0.265577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  166. [ 0.265580] ACPI: Power Button [PWRF]
  167. [ 0.266092] ACPI: SSDT dffa00f0 00190 (v01 AMI CPU1PM 00000001 INTL 20060113)
  168. [ 0.266524] processor LNXCPU:00: registered as cooling_device0
  169. [ 0.266791] ACPI: SSDT dffa0280 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
  170. [ 0.267205] processor LNXCPU:01: registered as cooling_device1
  171. [ 0.270807] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  172. [ 0.270899] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  173. [ 0.271339] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  174. [ 0.272264] brd: module loaded
  175. [ 0.272669] loop: module loaded
  176. [ 0.272734] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  177. [ 0.272811] ata_piix 0000:00:1f.1: version 2.13
  178. [ 0.272822] alloc irq_desc for 18 on node -1
  179. [ 0.272824] alloc kstat_irqs on node -1
  180. [ 0.272829] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  181. [ 0.272863] ata_piix 0000:00:1f.1: setting latency timer to 64
  182. [ 0.272934] scsi0 : ata_piix
  183. [ 0.272993] scsi1 : ata_piix
  184. [ 0.274167] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  185. [ 0.274170] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  186. [ 0.274188] alloc irq_desc for 19 on node -1
  187. [ 0.274190] alloc kstat_irqs on node -1
  188. [ 0.274194] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  189. [ 0.274198] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  190. [ 0.274226] ata_piix 0000:00:1f.2: setting latency timer to 64
  191. [ 0.274267] scsi2 : ata_piix
  192. [ 0.274310] scsi3 : ata_piix
  193. [ 0.274366] isapnp: Scanning for PnP cards...
  194. [ 0.275638] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
  195. [ 0.275641] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
  196. [ 0.275939] Fixed MDIO Bus: probed
  197. [ 0.275971] PPP generic driver version 2.4.2
  198. [ 0.276001] tun: Universal TUN/TAP device driver, 1.6
  199. [ 0.276002] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  200. [ 0.276078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  201. [ 0.276093] alloc irq_desc for 23 on node -1
  202. [ 0.276095] alloc kstat_irqs on node -1
  203. [ 0.276098] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  204. [ 0.276108] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  205. [ 0.276111] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  206. [ 0.276137] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  207. [ 0.276152] ehci_hcd 0000:00:1d.7: using broken periodic workaround
  208. [ 0.276161] ehci_hcd 0000:00:1d.7: debug port 1
  209. [ 0.280052] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  210. [ 0.280074] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
  211. [ 0.295984] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  212. [ 0.296078] usb usb1: configuration #1 chosen from 1 choice
  213. [ 0.296106] hub 1-0:1.0: USB hub found
  214. [ 0.296114] hub 1-0:1.0: 8 ports detected
  215. [ 0.296172] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  216. [ 0.296185] uhci_hcd: USB Universal Host Controller Interface driver
  217. [ 0.296218] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  218. [ 0.296224] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  219. [ 0.296227] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  220. [ 0.296255] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  221. [ 0.296277] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
  222. [ 0.296357] usb usb2: configuration #1 chosen from 1 choice
  223. [ 0.296378] hub 2-0:1.0: USB hub found
  224. [ 0.296385] hub 2-0:1.0: 2 ports detected
  225. [ 0.296422] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  226. [ 0.296427] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  227. [ 0.296430] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  228. [ 0.296456] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  229. [ 0.296476] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
  230. [ 0.296547] usb usb3: configuration #1 chosen from 1 choice
  231. [ 0.296568] hub 3-0:1.0: USB hub found
  232. [ 0.296575] hub 3-0:1.0: 2 ports detected
  233. [ 0.296612] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  234. [ 0.296617] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  235. [ 0.296620] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  236. [ 0.296645] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  237. [ 0.296672] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
  238. [ 0.296743] usb usb4: configuration #1 chosen from 1 choice
  239. [ 0.296764] hub 4-0:1.0: USB hub found
  240. [ 0.296769] hub 4-0:1.0: 2 ports detected
  241. [ 0.296806] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  242. [ 0.296811] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  243. [ 0.296814] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  244. [ 0.296841] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  245. [ 0.296867] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
  246. [ 0.296940] usb usb5: configuration #1 chosen from 1 choice
  247. [ 0.296961] hub 5-0:1.0: USB hub found
  248. [ 0.296966] hub 5-0:1.0: 2 ports detected
  249. [ 0.297056] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  250. [ 0.300090] serio: i8042 KBD port at 0x60,0x64 irq 1
  251. [ 0.300095] serio: i8042 AUX port at 0x60,0x64 irq 12
  252. [ 0.300199] mice: PS/2 mouse device common for all mice
  253. [ 0.300300] rtc_cmos 00:03: RTC can wake from S4
  254. [ 0.300334] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  255. [ 0.300356] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  256. [ 0.300445] device-mapper: uevent: version 1.0.3
  257. [ 0.327595] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  258. [ 0.340101] device-mapper: multipath: version 1.1.0 loaded
  259. [ 0.340105] device-mapper: multipath round-robin: version 1.0.0 loaded
  260. [ 0.340235] EISA: Probing bus 0 at eisa.0
  261. [ 0.340241] Cannot allocate resource for EISA slot 1
  262. [ 0.340260] EISA: Detected 0 cards.
  263. [ 0.350887] Freeing initrd memory: 7779k freed
  264. [ 0.354745] cpuidle: using governor ladder
  265. [ 0.354748] cpuidle: using governor menu
  266. [ 0.355171] TCP cubic registered
  267. [ 0.355321] NET: Registered protocol family 10
  268. [ 0.355756] lo: Disabled Privacy Extensions
  269. [ 0.356071] NET: Registered protocol family 17
  270. [ 0.356442] Using IPI No-Shortcut mode
  271. [ 0.356535] PM: Resume from disk failed.
  272. [ 0.356547] registered taskstats version 1
  273. [ 0.356802] Magic number: 3:902:563
  274. [ 0.356811] platform Fixed MDIO bus.0: hash matches
  275. [ 0.356884] rtc_cmos 00:03: setting system clock to 2011-03-21 03:34:48 UTC (1300678488)
  276. [ 0.356887] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  277. [ 0.356888] EDD information not available.
  278. [ 0.456405] ata1.00: ATAPI: PHILIPS SPD2413P, GP03, max UDMA/66
  279. [ 0.464386] ata4.00: ATA-8: WDC WD5000AAVS-14N7B0, 01.00A01, max UDMA/133
  280. [ 0.464388] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  281. [ 0.465104] ata3.00: ATA-8: WDC WD8000AARS-00Y5B1, 80.00A80, max UDMA/133
  282. [ 0.465107] ata3.00: 1562824368 sectors, multi 16: LBA48 NCQ (depth 0/32)
  283. [ 0.465140] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100
  284. [ 0.480348] ata4.00: configured for UDMA/133
  285. [ 0.481174] ata3.00: configured for UDMA/133
  286. [ 0.488073] ata1.00: configured for UDMA/66
  287. [ 0.496103] ata3.01: configured for UDMA/100
  288. [ 0.631433] isapnp: No Plug & Play device found
  289. [ 0.632475] scsi 0:0:0:0: CD-ROM PHILIPS SPD2413P GP03 PQ: 0 ANSI: 5
  290. [ 0.637385] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  291. [ 0.637388] Uniform CD-ROM driver Revision: 3.20
  292. [ 0.637485] sr 0:0:0:0: Attached scsi CD-ROM sr0
  293. [ 0.637535] sr 0:0:0:0: Attached scsi generic sg0 type 5
  294. [ 0.637656] scsi 2:0:0:0: Direct-Access ATA WDC WD8000AARS-0 80.0 PQ: 0 ANSI: 5
  295. [ 0.637747] sd 2:0:0:0: [sda] 1562824368 512-byte logical blocks: (800 GB/745 GiB)
  296. [ 0.637754] sd 2:0:0:0: Attached scsi generic sg1 type 0
  297. [ 0.637788] sd 2:0:0:0: [sda] Write Protect is off
  298. [ 0.637791] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  299. [ 0.638163] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  300. [ 0.638444] scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB02 PQ: 0 ANSI: 5
  301. [ 0.639118] sda: sda1 sda2 sda3 <
  302. [ 0.664107] usb 1-3: new high speed USB device using ehci_hcd and address 3
  303. [ 0.675824] sda5sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  304. [ 0.678909] sr 2:0:1:0: Attached scsi CD-ROM sr1
  305. [ 0.678952] sr 2:0:1:0: Attached scsi generic sg2 type 5
  306. [ 0.679064] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAVS-1 01.0 PQ: 0 ANSI: 5
  307. [ 0.679145] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  308. [ 0.679161] sd 3:0:0:0: Attached scsi generic sg3 type 0
  309. [ 0.679185] sd 3:0:0:0: [sdb] Write Protect is off
  310. [ 0.679187] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  311. [ 0.679213] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  312. [ 0.679328] sdb: sda6 sda7 sda8 sda9 sdb1 sdb2 sdb3 sdb4 sdb5
  313. [ 0.729849] sd 3:0:0:0: [sdb] Attached SCSI disk
  314. [ 0.733441] sda10 > sda4
  315. [ 0.733865] sd 2:0:0:0: [sda] Attached SCSI disk
  316. [ 0.733878] Freeing unused kernel memory: 660k freed
  317. [ 0.734220] Write protecting the kernel text: 4688k
  318. [ 0.734255] Write protecting the kernel read-only data: 1844k
  319. [ 0.747974] udev: starting version 151
  320. [ 0.796768] usb 1-3: configuration #1 chosen from 1 choice
  321. [ 0.796836] hub 1-3:1.0: USB hub found
  322. [ 0.796939] hub 1-3:1.0: 4 ports detected
  323. [ 0.814668] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  324. [ 0.814680] ATL1E 0000:02:00.0: setting latency timer to 64
  325. [ 1.036024] usb 2-2: new low speed USB device using uhci_hcd and address 2
  326. [ 1.213521] usb 2-2: configuration #1 chosen from 1 choice
  327. [ 1.225645] usbcore: registered new interface driver hiddev
  328. [ 1.225722] usbcore: registered new interface driver usbhid
  329. [ 1.225724] usbhid: v2.6:USB HID core driver
  330. [ 1.242659] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
  331. [ 1.242729] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
  332. [ 1.274444] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
  333. [ 1.275086] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
  334. [ 1.275189] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
  335. [ 1.304641] usb 1-3.1: new low speed USB device using ehci_hcd and address 4
  336. [ 1.429348] usb 1-3.1: configuration #1 chosen from 1 choice
  337. [ 1.635261] EXT4-fs (sda5): mounted filesystem with ordered data mode
  338. [ 11.440149] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
  339. [ 11.440158] generic-usb 0003:046D:C214.0003: timeout initializing reports
  340. [ 11.440239] input: Logitech Logitech Attack 3 as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input5
  341. [ 11.440413] generic-usb 0003:046D:C214.0003: input,hidraw2: USB HID v1.10 Joystick [Logitech Logitech Attack 3] on usb-0000:00:1d.7-3.1/input0
  342. [ 11.528162] usb 1-3.2: new high speed USB device using ehci_hcd and address 5
  343. [ 11.653364] usb 1-3.2: configuration #1 chosen from 1 choice
  344. [ 11.740191] usb 1-3.4: new high speed USB device using ehci_hcd and address 6
  345. [ 11.851631] usb 1-3.4: configuration #1 chosen from 2 choices
  346. [ 13.418470] udev: starting version 151
  347. [ 13.441931] Adding 3906552k swap on /dev/sda7. Priority:-1 extents:1 across:3906552k
  348. [ 13.448608] Linux agpgart interface v0.103
  349. [ 13.468751] lp: driver loaded but no devices found
  350. [ 13.514628] vga16fb: initializing
  351. [ 13.514631] vga16fb: mapped to 0xc00a0000
  352. [ 13.514690] fb0: VGA16 VGA frame buffer device
  353. [ 13.528639] udev: renamed network interface eth0 to eth1
  354. [ 13.655279] nvidia: module license 'NVIDIA' taints kernel.
  355. [ 13.655281] Disabling lock debugging due to kernel taint
  356. [ 13.953022] parport_pc 00:06: reported by Plug and Play ACPI
  357. [ 13.953123] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
  358. [ 14.184741] intel_rng: FWH not detected
  359. [ 14.188556] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
  360. [ 14.191261] lp0: using parport0 (interrupt-driven).
  361. [ 14.199278] Initializing USB Mass Storage driver...
  362. [ 14.199750] rtusb init --->
  363. [ 14.199905]
  364. [ 14.199906]
  365. [ 14.199907] === pAd = f9416000, size = 566748 ===
  366. [ 14.199907]
  367. [ 14.199909] <-- RTMPAllocAdapterBlock, Status=0
  368. [ 14.200552] usbcore: registered new interface driver rt2870
  369. [ 14.215888] scsi4 : SCSI emulation for USB Mass Storage devices
  370. [ 14.223591] usbcore: registered new interface driver usb-storage
  371. [ 14.223594] USB Mass Storage support registered.
  372. [ 14.224069] usb-storage: device found at 6
  373. [ 14.224071] usb-storage: waiting for device to settle before scanning
  374. [ 14.225801] ppdev: user-space parallel port driver
  375. [ 14.234200] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  376. [ 14.234207] nvidia 0000:01:00.0: setting latency timer to 64
  377. [ 14.239658] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009
  378. [ 14.291370] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  379. [ 14.291390] HDA Intel 0000:00:1b.0: setting latency timer to 64
  380. [ 14.297125] Console: switching to colour frame buffer device 80x30
  381. [ 14.311175] type=1505 audit(1300678502.451:2): operation="profile_load" pid=636 name="/sbin/dhclient3"
  382. [ 14.311184] type=1505 audit(1300678502.451:3): operation="profile_replace" pid=697 name="/sbin/dhclient3"
  383. [ 14.311802] type=1505 audit(1300678502.451:4): operation="profile_load" pid=636 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  384. [ 14.311810] type=1505 audit(1300678502.451:5): operation="profile_replace" pid=697 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  385. [ 14.312355] type=1505 audit(1300678502.451:6): operation="profile_load" pid=636 name="/usr/lib/connman/scripts/dhclient-script"
  386. [ 14.313350] type=1505 audit(1300678502.455:7): operation="profile_replace" pid=630 name="/sbin/dhclient3"
  387. [ 14.313977] type=1505 audit(1300678502.455:8): operation="profile_replace" pid=630 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  388. [ 14.314323] type=1505 audit(1300678502.455:9): operation="profile_replace" pid=630 name="/usr/lib/connman/scripts/dhclient-script"
  389. [ 14.320665] type=1505 audit(1300678502.463:10): operation="profile_replace" pid=697 name="/usr/lib/connman/scripts/dhclient-script"
  390. [ 14.424235] ip_tables: (C) 2000-2006 Netfilter Core Team
  391. [ 14.445405] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  392. [ 14.445719] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  393. [ 14.445721] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  394. [ 14.445723] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  395. [ 15.190566] RPC: Registered udp transport module.
  396. [ 15.190569] RPC: Registered tcp transport module.
  397. [ 15.190571] RPC: Registered tcp NFSv4.1 backchannel transport module.
  398. [ 15.198283] type=1505 audit(1300678503.339:11): operation="profile_load" pid=965 name="/usr/share/gdm/guest-session/Xsession"
  399. [ 15.279317] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  400. [ 15.298252] alloc irq_desc for 27 on node -1
  401. [ 15.298255] alloc kstat_irqs on node -1
  402. [ 15.298270] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X
  403. [ 15.298507] ADDRCONF(NETDEV_UP): eth1: link is not ready
  404. [ 15.571919] <-- RTMPAllocTxRxRingMemory, Status=0
  405. [ 15.573458] -->RTUSBVenderReset
  406. [ 15.573577] <--RTUSBVenderReset
  407. [ 15.921892] --> Error 2 opening /etc/Wireless/RT3070STA/RT3070STA.dat
  408. [ 15.921894] 1. Phy Mode = 0
  409. [ 15.921896] 2. Phy Mode = 0
  410. [ 15.955881] RTMPSetPhyMode: channel is out of range, use first channel=1
  411. [ 15.964514] 3. Phy Mode = 0
  412. [ 15.977134] MCS Set = 00 00 00 00 00
  413. [ 16.090895] <==== RTMPInitialize, Status=0
  414. [ 16.092398] 0x1300 = 000a4200
  415. [ 18.606536] svc: failed to register lockdv1 RPC service (errno 97).
  416. [ 18.607314] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  417. [ 18.624827] NFSD: starting 90-second grace period
  418. [ 19.220241] usb-storage: device scan complete
  419. [ 19.220859] scsi 4:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2
  420. [ 19.221252] sd 4:0:0:0: Attached scsi generic sg4 type 0
  421. [ 19.222965] sd 4:0:0:0: [sdc] 989181 2048-byte logical blocks: (2.02 GB/1.88 GiB)
  422. [ 19.223714] sd 4:0:0:0: [sdc] Write Protect is off
  423. [ 19.223718] sd 4:0:0:0: [sdc] Mode Sense: 6e 00 00 08
  424. [ 19.223721] sd 4:0:0:0: [sdc] Assuming drive cache: write through
  425. [ 19.225341] sd 4:0:0:0: [sdc] 989181 2048-byte logical blocks: (2.02 GB/1.88 GiB)
  426. [ 19.226090] sd 4:0:0:0: [sdc] Assuming drive cache: write through
  427. [ 19.226094] sdc:
  428. [ 19.229091] sd 4:0:0:0: [sdc] 989181 2048-byte logical blocks: (2.02 GB/1.88 GiB)
  429. [ 19.229837] sd 4:0:0:0: [sdc] Assuming drive cache: write through
  430. [ 19.229841] sd 4:0:0:0: [sdc] Attached SCSI removable disk
  431. [ 20.047905] vboxdrv: Found 2 processor cores.
  432. [ 20.048373] vboxdrv: fAsync=0 offMin=0x1e3 offMax=0x1b90
  433. [ 20.048742] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
  434. [ 20.048744] vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
  435. [ 20.352835] CPU0 attaching NULL sched-domain.
  436. [ 20.352840] CPU1 attaching NULL sched-domain.
  437. [ 20.380601] CPU0 attaching sched-domain:
  438. [ 20.380604] domain 0: span 0-1 level MC
  439. [ 20.380607] groups: 0 1
  440. [ 20.380612] CPU1 attaching sched-domain:
  441. [ 20.380614] domain 0: span 0-1 level MC
  442. [ 20.380616] groups: 1 0
  443. [ 26.500050] wlan0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!