MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 **
Loading file "uEnv.txt" from mmc device 0:1
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
ext2load - load binary file from a Ext2 filesystem

Usage:
ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
    - load binary file 'filename' from 'dev' on 'interface'
      to address 'addr' from ext2 filesystem
Loading file "boot/uEnv.txt" from mmc device 0:1
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
ext2load - load binary file from a Ext2 filesystem

Usage:
ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
    - load binary file 'filename' from 'dev' on 'interface'
      to address 'addr' from ext2 filesystem
reading boot.scr

314 bytes read
Jumping to boot.scr
## Executing script at 44000000
reading script.bin

43676 bytes read
reading uImage

4155612 bytes read
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.0.57+
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4155548 Bytes = 4 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ...

OK

Starting kernel ...

<6>Initializing cgroup subsys cpuset
<5>Linux version 3.0.57+ (root@toshiba) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 PREEMPT Sun Feb 3 10:50:10 CET 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun4i
<6>Memory cut off:
<6>     MALI : 0x5c000000 - 0x5fffffff  (  64 MB)
<4>Ignoring unrecognised tag 0x00000000
<6>Memory Reserved:
<6>     SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
<6>     VE   : 0x44000000 - 0x48ffffff  (  80 MB)
<6>     G2D  : 0x58000000 - 0x58ffffff  (  16 MB)
<6>     LCD  : 0x5a000000 - 0x5bffffff  (  32 MB)
Memory policy: ECC disabled, Data cache writeback
<6>BROM Ver: 1100 1100 1623
<6>chip-id: A10 (AW1623 revision C)
<7>On node 0 totalpages: 245760
<7>free_area_init_node: node 0, pgdat c07e3278, node_mem_map c08a1000
<7>  Normal zone: 1280 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 146176 pages, LIFO batch:31
<7>  HighMem zone: 768 pages used for memmap
<7>  HighMem zone: 97536 pages, LIFO batch:31
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243712
<5>Kernel command line: console=ttyS0,115200 console=tty0 hdmi.audio=EDID:0 disp.scree0_output_mode=EDID:1280x1024p60 root=/dev/mmcblk0p2 rootwait panic=10
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 448MB 512MB = 960MB total
<5>Memory: 834544k/834544k available, 148496k reserved, 393216K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xe8800000 - 0xf0000000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0032000   ( 168 kB)
      .text : 0xc0032000 - 0xc07a1000   (7612 kB)
      .data : 0xc07a2000 - 0xc07eb550   ( 294 kB)
       .bss : 0xc07eb574 - 0xc08a0a90   ( 726 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>NR_IRQS:96 nr_irqs:96 96
<6>timer0: Periodic Mode
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop...