Advertisement
kamalj

/dev/da1

May 17th, 2015
291
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.70 KB | None | 0 0
  1. [root@freenas] ~# smartctl -a /dev/da1
  2. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: HGST Deskstar NAS
  7. Device Model: HGST HDN724040ALE640
  8. Serial Number: PKxxxxxxxxA4S
  9. LU WWN Device Id: 5 000cca 24cd82f6b
  10. Firmware Version: MJAOA5E0
  11. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS T13/1699-D revision 4
  17. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Sun May 17 12:53:48 2015 EDT
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 24) seconds.
  34. Offline data collection
  35. capabilities: (0x5b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. No Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 566) minutes.
  52. SCT capabilities: (0x003d) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  61. 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 80
  62. 3 Spin_Up_Time 0x0007 176 176 024 Pre-fail Always - 464 (Average 412)
  63. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 26
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  65. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  66. 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34
  67. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4639
  68. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
  70. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 26
  71. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 26
  72. 194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 21/36)
  73. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  74. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 74
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 74 (device log contains only the most recent five errors)
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 74 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours)
  95. When the command that caused the error occurred, the device was active or idle.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 84 51 71 27 d1 9b 04 Error: ICRC, ABRT at LBA = 0x049bd127 = 77320487
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. 60 00 08 98 d1 9b 40 00 1d+16:35:02.320 READ FPDMA QUEUED
  106. 60 00 00 98 d0 9b 40 00 1d+16:35:02.319 READ FPDMA QUEUED
  107. 60 00 08 98 cf 9b 40 00 1d+16:35:02.318 READ FPDMA QUEUED
  108. 60 00 00 98 ce 9b 40 00 1d+16:35:02.317 READ FPDMA QUEUED
  109. 60 00 08 98 cd 9b 40 00 1d+16:35:02.316 READ FPDMA QUEUED
  110.  
  111. Error 73 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
  112. When the command that caused the error occurred, the device was active or idle.
  113.  
  114. After command completion occurred, registers were:
  115. ER ST SC SN CL CH DH
  116. -- -- -- -- -- -- --
  117. 84 51 71 d7 1d 6e 07 Error: ICRC, ABRT at LBA = 0x076e1dd7 = 124657111
  118.  
  119. Commands leading to the command that caused the error were:
  120. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  121. -- -- -- -- -- -- -- -- ---------------- --------------------
  122. 60 00 08 20 23 6e 40 00 1d+15:30:03.007 READ FPDMA QUEUED
  123. 60 80 00 c8 1d 6e 40 00 1d+15:30:03.006 READ FPDMA QUEUED
  124. 60 80 08 40 1d 6e 40 00 1d+15:30:03.006 READ FPDMA QUEUED
  125. 60 00 00 38 1c 6e 40 00 1d+15:30:03.005 READ FPDMA QUEUED
  126. 60 00 08 38 1b 6e 40 00 1d+15:30:03.004 READ FPDMA QUEUED
  127.  
  128. Error 72 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
  129. When the command that caused the error occurred, the device was active or idle.
  130.  
  131. After command completion occurred, registers were:
  132. ER ST SC SN CL CH DH
  133. -- -- -- -- -- -- --
  134. 84 51 51 7f 04 b6 04 Error: ICRC, ABRT at LBA = 0x04b6047f = 79037567
  135.  
  136. Commands leading to the command that caused the error were:
  137. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  138. -- -- -- -- -- -- -- -- ---------------- --------------------
  139. 60 00 00 d0 04 b6 40 00 1d+15:25:16.457 READ FPDMA QUEUED
  140. 60 00 08 d0 03 b6 40 00 1d+15:25:16.456 READ FPDMA QUEUED
  141. 60 00 00 d0 02 b6 40 00 1d+15:25:16.455 READ FPDMA QUEUED
  142. 60 00 08 d0 01 b6 40 00 1d+15:25:16.455 READ FPDMA QUEUED
  143. 60 00 00 d0 00 b6 40 00 1d+15:25:16.454 READ FPDMA QUEUED
  144.  
  145. Error 71 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
  146. When the command that caused the error occurred, the device was active or idle.
  147.  
  148. After command completion occurred, registers were:
  149. ER ST SC SN CL CH DH
  150. -- -- -- -- -- -- --
  151. 84 51 71 f7 bd 3a 09 Error: ICRC, ABRT at LBA = 0x093abdf7 = 154844663
  152.  
  153. Commands leading to the command that caused the error were:
  154. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  155. -- -- -- -- -- -- -- -- ---------------- --------------------
  156. 60 f0 00 78 bd 3a 40 00 1d+15:13:41.061 READ FPDMA QUEUED
  157. 60 00 00 78 bc 3a 40 00 1d+15:13:41.061 READ FPDMA QUEUED
  158. 60 f0 00 88 bb 3a 40 00 1d+15:13:41.060 READ FPDMA QUEUED
  159. 60 a0 00 e8 ba 3a 40 00 1d+15:13:41.055 READ FPDMA QUEUED
  160. 60 f0 00 08 b4 3a 40 00 1d+15:13:41.055 READ FPDMA QUEUED
  161.  
  162. Error 70 occurred at disk power-on lifetime: 3962 hours (165 days + 2 hours)
  163. When the command that caused the error occurred, the device was active or idle.
  164.  
  165. After command completion occurred, registers were:
  166. ER ST SC SN CL CH DH
  167. -- -- -- -- -- -- --
  168. 84 51 b1 67 67 78 0a Error: ICRC, ABRT at LBA = 0x0a786767 = 175662951
  169.  
  170. Commands leading to the command that caused the error were:
  171. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  172. -- -- -- -- -- -- -- -- ---------------- --------------------
  173. 60 00 08 18 68 78 40 00 1d+14:16:21.026 READ FPDMA QUEUED
  174. 60 00 00 18 67 78 40 00 1d+14:16:21.025 READ FPDMA QUEUED
  175. 60 00 08 18 66 78 40 00 1d+14:16:21.024 READ FPDMA QUEUED
  176. 60 00 00 18 65 78 40 00 1d+14:16:21.023 READ FPDMA QUEUED
  177. 60 00 08 18 64 78 40 00 1d+14:16:21.022 READ FPDMA QUEUED
  178.  
  179. SMART Self-test log structure revision number 1
  180. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  181. # 1 Extended offline Completed without error 00% 1126 -
  182. # 2 Short offline Completed without error 00% 1114 -
  183. # 3 Extended offline Completed without error 00% 1005 -
  184. # 4 Short offline Completed without error 00% 994 -
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
  196.  
  197. [root@freenas] ~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement