Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.5.4-vs2.3.4.3] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: SAMSUNG SpinPoint F4 EG (AFT)
- Device Model: SAMSUNG HD204UI
- Serial Number: S2H7JX0C700519
- LU WWN Device Id: 5 0000f0 0700b1905
- Firmware Version: 1AQ10001
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 6
- Local Time is: Thu Nov 15 11:20:34 2012 EST
- ==> WARNING: Using smartmontools or hdparm with this
- drive may result in data loss due to a firmware bug.
- ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
- Buggy and fixed firmware report same version number!
- See the following web pages for details:
- http://www.samsung.com/global/business/hdd/faqView.do?b2b_bbs_msg_id=386
- http://sourceforge.net/apps/trac/smartmontools/wiki/SamsungF4EGBadBlocks
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (20220) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 697
- 2 Throughput_Performance 0x0026 055 055 000 Old_age Always - 18500
- 3 Spin_Up_Time 0x0023 067 066 025 Pre-fail Always - 10126
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 404
- 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
- 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1859
- 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
- 181 Program_Fail_Cnt_Total 0x0022 095 095 000 Old_age Always - 127478518
- 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0002 061 046 000 Old_age Always - 39 (Min/Max 14/54)
- 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 1
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
- 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 12
- 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 225 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 177138
- SMART Error Log Version: 1
- ATA Error Count: 1754 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1754 occurred at disk power-on lifetime: 1854 hours (77 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 20 00 00 e0 00 00:29:28.979 READ DMA
- 25 00 08 a0 88 e0 e0 00 00:29:28.979 READ DMA EXT
- 25 00 08 00 88 e0 e0 00 00:29:28.979 READ DMA EXT
- 25 00 08 70 87 e0 e0 00 00:29:28.979 READ DMA EXT
- 25 00 08 e8 85 e0 e0 00 00:29:28.979 READ DMA EXT
- Error 1753 occurred at disk power-on lifetime: 1845 hours (76 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 20 00 00 e0 00 00:28:27.622 READ DMA
- 25 00 08 a0 88 e0 e0 00 00:28:27.622 READ DMA EXT
- 25 00 08 00 88 e0 e0 00 00:28:27.622 READ DMA EXT
- 25 00 30 28 88 3d e0 00 00:28:27.622 READ DMA EXT
- 25 00 20 08 88 3d e0 00 00:28:27.622 READ DMA EXT
- Error 1752 occurred at disk power-on lifetime: 1845 hours (76 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 20 00 00 e0 00 00:28:27.154 READ DMA
- 25 00 08 a0 88 e0 e0 00 00:28:27.154 READ DMA EXT
- 25 00 08 00 88 e0 e0 00 00:28:27.154 READ DMA EXT
- 25 00 08 90 29 94 e0 00 00:28:27.154 READ DMA EXT
- 25 00 08 d8 28 94 e0 00 00:28:27.154 READ DMA EXT
- Error 1751 occurred at disk power-on lifetime: 1845 hours (76 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 20 00 00 e0 00 00:28:26.925 READ DMA
- c8 00 20 00 00 00 e0 00 00:28:26.925 READ DMA
- 25 00 08 a0 88 e0 e0 00 00:28:26.925 READ DMA EXT
- c8 00 02 08 18 a0 e0 00 00:28:26.925 READ DMA
- c8 00 02 08 18 a0 e0 00 00:28:26.925 READ DMA
- Error 1750 occurred at disk power-on lifetime: 1845 hours (76 days + 21 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 20 00 00 e0 00 00:28:26.923 READ DMA
- c8 00 20 00 00 00 e0 00 00:28:26.923 READ DMA
- 25 00 08 a0 88 e0 e0 00 00:28:26.923 READ DMA EXT
- c8 00 02 08 18 a0 e0 00 00:28:26.923 READ DMA
- c8 00 02 08 18 a0 e0 00 00:28:26.923 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 1819 88
- # 2 Short offline Completed: read failure 90% 1793 88
- # 3 Short offline Completed: read failure 90% 1688 88
- # 4 Short offline Completed: read failure 90% 1672 88
- # 5 Short offline Completed: read failure 90% 1340 88
- # 6 Short offline Completed: read failure 90% 1316 88
- # 7 Extended offline Completed: read failure 90% 1292 88
- # 8 Short offline Completed: read failure 90% 1245 88
- # 9 Short offline Completed: read failure 90% 1229 88
- #10 Short offline Completed: read failure 90% 1213 88
- #11 Short offline Completed: read failure 90% 1198 88
- #12 Short offline Completed: read failure 90% 1177 88
- #13 Extended offline Completed: read failure 90% 1161 88
- #14 Short offline Completed: read failure 90% 1145 88
- #15 Short offline Completed: read failure 90% 1122 88
- #16 Short offline Completed: read failure 90% 1106 88
- #17 Short offline Completed: read failure 90% 1088 88
- #18 Short offline Completed: read failure 90% 1072 88
- #19 Extended offline Completed: read failure 90% 1058 88
- #20 Short offline Completed: read failure 90% 1042 88
- #21 Short offline Completed: read failure 90% 1026 88
- Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed_read_failure [90% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement