Mini 0801 update log UART

firmware program pre-process
nvd-pref object 0 load
nvd-pref backup success
nvd-calib object 0 load
nvd-calib object 1 load
nvd-calib object 2 load
nvd-calib object 3 load
nvd-calib backup success
firmware program pre-process success

BST code found in firmware!
BLD code found in firmware!
kernel image found in firmware!
romfs found in firmware!
DSP microcode found in firmware!
        length:         16029
        crc32:          0xb5bb00b9
        ver_num:        0.1
        ver_date:       2013/10/26
        img_len:        15773
        mem_addr:       0xc0100000
        flag:           0x00000000
        magic:          0xa324eb90
verifying image crc ... done
program bst to PROM ...

program ok

        length:         125664
        crc32:          0x1eec73ca
        ver_num:        1.3
        ver_date:       2013/10/26
        img_len:        125408
        mem_addr:       0xc0000000
        flag:           0x00000000
        magic:          0xa324eb90
verifying image crc ... done
program bld to SDMMC ...

program ok

        length:         1680982
        crc32:          0x1b24720d
        ver_num:        0.1
        ver_date:       2013/10/26
        img_len:        1680726
        mem_addr:       0xc0100000
        flag:           0x00000002
        magic:          0xa324eb90
verifying image crc ... done
program pri to SDMMC ...

program ok

        length:         2068736
        crc32:          0x9d55a621
        ver_num:        2.0
        ver_date:       2013/10/26
        img_len:        2068480
        mem_addr:       0x00000000
        flag:           0x00000001
        magic:          0xa324eb90
verifying image crc ... done
program rom to SDMMC ...

program ok

        length:         403328
        crc32:          0x37771e94
        ver_num:        1.0
        ver_date:       2013/10/26
        img_len:        403072
        mem_addr:       0xc34fffb0
        flag:           0x00000002
        magic:          0xa324eb90
verifying image crc ... done
program dsp to SDMMC ...

program ok


------ Report ------
Program to BST success
Program to BLD success
Program to kernel success
Program to romfs success
Program to DSP success
firmware program post-process
firmware program post-process success
audio encode flow mem had been released
wait for entering timer mode
entering timer mode successfully
DSP change mode done in DECODE_MODE
=========================
======= Power Off =======
=========================
UDF didn't support mw_enable_clink()
Cannot found SOI