Guest User

wl127x: dmesg log for AP association fail

a guest
Jul 9th, 2013
205
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.07 KB | None | 0 0
  1. [ 26.385000] wake enabled for irq 54
  2. [ 26.750000] wlcore: PG Ver major = 1 minor = 0, MAC is not present
  3. [ 26.750000] wlcore: base address: oui deadbe nic ef0000
  4. [ 26.930000] wlcore: loaded
  5. [ 33.315000] wlcore: mac80211 start
  6. [ 33.315000] wlcore: mac80211 add interface type 2 mac de:ad:be:ef:00:00
  7. [ 33.325000] wlcore: allocating hw queue base: 0
  8. [ 33.895000] wlcore: acx event mbox mask
  9. [ 33.895000] wlcore: cmd configure (17)
  10. [ 33.900000] wlcore: cmd test
  11. [ 33.905000] wlcore: FEM autodetect: manual, manufacturer: 1
  12. [ 33.905000]
  13. [ 33.905000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000000: 00 00 00 00 19 00 00 00 00 00 ec f6 00 0c 18 f8
  14. [ 33.915000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000010: fc 00 08 10 f0 f8 00 0a 14 00 00 00 00 00 00 00
  15. [ 33.925000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000020: 00 00 00 00 00 00 00 ee f4 f8 fe 05 ea f3 fa 01
  16. [ 33.930000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000030: 06 e5 f1 fa 02 07 d9 01 80 00 1d 1f 22 26 27 29
  17. [ 33.940000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000040: 1d 1f 22 26 27 27 16 1d 1e 20 24 25 50 50 50 50
  18. [ 33.945000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000050: 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
  19. [ 33.950000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000060: 50 50 50 50 50 50 50 50 01 02 02 02 02 00 15 15
  20. [ 33.955000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000070: 15 19 19 15 10 1e 2d 00 01 ae 01 c2 01 cc 01 db
  21. [ 33.960000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000080: 01 db 01 d1 01 00 80 80 80 80 80 80 80 00 00 00
  22. [ 33.965000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 00000090: 00 00 00 00 1c 1e 21 23 25 50 18 1e 21 23 25 50
  23. [ 33.970000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 000000a0: 16 1c 1e 20 20 50 50 50 50 50 50 50 50 50 50 50
  24. [ 33.975000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 000000b0: 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
  25. [ 33.980000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 000000c0: 50 50 50 50 50 50 50 50 50 01 02 02 02 02 00 10
  26. [ 33.985000] wlcore: TEST_CMD_INI_FILE_RADIO_PARAM: 000000d0: 10 10 10 10 10 10 10 10 10 10 10 10 1e 2d 00 00
  27. [ 33.990000] wlcore: cmd test
  28. [ 33.995000] wlcore: TEST_CMD_INI_FILE_EXT_RADIO_PARAM: 00000000: 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00
  29. [ 34.000000] wlcore: TEST_CMD_INI_FILE_EXT_RADIO_PARAM: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  30. [ 34.010000] wlcore: TEST_CMD_INI_FILE_EXT_RADIO_PARAM: 00000020: 00 00 00 00
  31. [ 34.015000] wlcore: cmd test
  32. [ 34.015000] wlcore: cmd template_set 9 (role 255)
  33. [ 34.025000] wlcore: cmd template_set 10 (role 255)
  34. [ 34.025000] wlcore: cmd template_set 2 (role 255)
  35. [ 34.035000] wlcore: cmd template_set 3 (role 255)
  36. [ 34.035000] wlcore: cmd template_set 0 (role 255)
  37. [ 34.045000] wlcore: cmd template_set 6 (role 255)
  38. [ 34.045000] wlcore: cmd template_set 5 (role 255)
  39. [ 34.055000] wlcore: cmd template_set 4 (role 255)
  40. [ 34.055000] wlcore: cmd template_set 1 (role 255)
  41. [ 34.060000] wlcore: cmd template_set 15 (role 255)
  42. [ 34.065000] wlcore: cmd template_set 14 (role 255)
  43. [ 34.070000] wlcore: cmd template_set 13 (role 255)
  44. [ 34.075000] wlcore: cmd template_set 16 (role 255)
  45. [ 34.080000] wlcore: cmd template_set 7 (role 255)
  46. [ 34.085000] wlcore: cmd template_set 7 (role 255)
  47. [ 34.085000] wlcore: cmd template_set 7 (role 255)
  48. [ 34.095000] wlcore: cmd template_set 7 (role 255)
  49. [ 34.095000] wlcore: wl1271 mem cfg
  50. [ 34.100000] wlcore: cmd configure (1)
  51. [ 34.125000] wlcore: cmd config firmware logger
  52. [ 34.125000] wlcore: acx sg cfg
  53. [ 34.125000] wlcore: cmd configure (22)
  54. [ 34.135000] wlcore: acx sg enable
  55. [ 34.135000] wlcore: cmd configure (21)
  56. [ 34.145000] wlcore: acx mem map
  57. [ 34.145000] wlcore: cmd interrogate
  58. [ 34.145000] wlcore: acx rx msdu life time
  59. [ 34.150000] wlcore: cmd configure (60)
  60. [ 34.160000] wlcore: acx dco itrim parameters
  61. [ 34.160000] wlcore: cmd configure (55)
  62. [ 34.160000] wlcore: acx tx config options
  63. [ 34.170000] wlcore: cmd configure (15)
  64. [ 34.170000] wlcore: wl1271 rx interrupt config
  65. [ 34.175000] wlcore: cmd configure (39)
  66. [ 34.180000] wlcore: acx cca threshold
  67. [ 34.180000] wlcore: cmd configure (16)
  68. [ 34.190000] wlcore: acx frag threshold: 2352
  69. [ 34.190000] wlcore: cmd configure (40)
  70. [ 34.200000] wlcore: cmd data path
  71. [ 34.200000] wlcore: acx pm config
  72. [ 34.200000] wlcore: cmd configure (64)
  73. [ 34.210000] wlcore: acx set rate mgmt params
  74. [ 34.210000] wlcore: cmd configure (52)
  75. [ 34.210000] wlcore: acx config hangover
  76. [ 34.215000] wlcore: cmd configure (66)
  77. [ 34.225000] wlcore: firmware booted (Rev 6.3.10.0.136)
  78. [ 34.225000] wlcore: 11a is supported
  79. [ 34.230000] wlcore: cmd role enable
  80. [ 34.235000] wlcore: acx sleep auth 2
  81. [ 34.235000] wlcore: cmd configure (29)
  82. [ 34.245000] wlcore: acx config ps
  83. [ 34.245000] wlcore: cmd configure (65)
  84. [ 34.245000] wlcore: acx fm coex setting
  85. [ 34.250000] wlcore: cmd configure (23)
  86. [ 34.260000] wlcore: acx rate policies
  87. [ 34.260000] wlcore: basic_rate: 0x3, full_rate: 0x3
  88. [ 34.260000] wlcore: cmd configure (27)
  89. [ 34.275000] wlcore: cmd configure (27)
  90. [ 34.275000] wlcore: cmd configure (27)
  91. [ 34.275000] wlcore: acx group address tbl
  92. [ 34.280000] wlcore: cmd configure (63)
  93. [ 34.290000] wlcore: acx connection monitor parameters: disabled
  94. [ 34.290000] wlcore: cmd configure (18)
  95. [ 34.300000] wlcore: acx beacon filter table
  96. [ 34.300000] wlcore: cmd configure (24)
  97. [ 34.300000] wlcore: acx beacon filter opt
  98. [ 34.305000] wlcore: cmd configure (11)
  99. [ 34.315000] wlcore: acx bcn dtim options
  100. [ 34.315000] wlcore: cmd configure (20)
  101. [ 34.315000] wlcore: acx rssi snr avg weights
  102. [ 34.320000] wlcore: cmd configure (43)
  103. [ 34.335000] wlcore: acx slot
  104. [ 34.335000] wlcore: cmd configure (2)
  105. [ 34.335000] wlcore: acx service period timeout
  106. [ 34.340000] wlcore: cmd configure (33)
  107. [ 34.350000] wlcore: acx rts threshold: 2353
  108. [ 34.350000] wlcore: cmd configure (62)
  109. [ 34.355000] wlcore: acx ac cfg 0 cw_ming 15 cw_max 63 aifs 3 txop 0
  110. [ 34.360000] wlcore: cmd configure (3)
  111. [ 34.365000] wlcore: acx tid config
  112. [ 34.365000] wlcore: cmd configure (9)
  113. [ 34.375000] wlcore: acx ac cfg 1 cw_ming 15 cw_max 63 aifs 7 txop 0
  114. [ 34.375000] wlcore: cmd configure (3)
  115. [ 34.385000] wlcore: acx tid config
  116. [ 34.385000] wlcore: cmd configure (9)
  117. [ 34.385000] wlcore: acx ac cfg 2 cw_ming 15 cw_max 63 aifs 1 txop 3008
  118. [ 34.390000] wlcore: cmd configure (3)
  119. [ 34.400000] wlcore: acx tid config
  120. [ 34.400000] wlcore: cmd configure (9)
  121. [ 34.400000] wlcore: acx ac cfg 3 cw_ming 15 cw_max 63 aifs 1 txop 1504
  122. [ 34.410000] wlcore: cmd configure (3)
  123. [ 34.420000] wlcore: acx tid config
  124. [ 34.420000] wlcore: cmd configure (9)
  125. [ 34.420000] wlcore: acx feature cfg
  126. [ 34.425000] wlcore: cmd configure (67)
  127. [ 34.430000] wlcore: acx keep alive mode: 0
  128. [ 34.430000] wlcore: cmd configure (44)
  129. [ 34.445000] wlcore: acx ba initiator policy
  130. [ 34.445000] wlcore: cmd configure (46)
  131. [ 34.445000] wlcore: mac80211 bss info role 0 changed 0xe
  132. [ 34.455000] wlcore: acx slot
  133. [ 34.455000] wlcore: cmd configure (2)
  134. [ 34.465000] wlcore: acx_set_preamble
  135. [ 34.465000] wlcore: cmd configure (30)
  136. [ 34.465000] wlcore: acx_set_ctsprotect
  137. [ 34.470000] wlcore: cmd configure (28)
  138. [ 34.480000] wlcore: mac80211 conf tx 0
  139. [ 34.480000] wlcore: acx ac cfg 3 cw_ming 15 cw_max 1023 aifs 2 txop 0
  140. [ 34.490000] wlcore: cmd configure (3)
  141. [ 34.490000] wlcore: acx tid config
  142. [ 34.490000] wlcore: cmd configure (9)
  143. [ 34.500000] wlcore: mac80211 conf tx 1
  144. [ 34.500000] wlcore: acx ac cfg 2 cw_ming 15 cw_max 1023 aifs 2 txop 0
  145. [ 34.505000] wlcore: cmd configure (3)
  146. [ 34.515000] wlcore: acx tid config
  147. [ 34.515000] wlcore: cmd configure (9)
  148. [ 34.520000] wlcore: mac80211 conf tx 2
  149. [ 34.520000] wlcore: acx ac cfg 0 cw_ming 15 cw_max 1023 aifs 2 txop 0
  150. [ 34.530000] wlcore: cmd configure (3)
  151. [ 34.530000] wlcore: acx tid config
  152. [ 34.535000] wlcore: cmd configure (9)
  153. [ 34.545000] wlcore: mac80211 conf tx 3
  154. [ 34.545000] wlcore: acx ac cfg 1 cw_ming 15 cw_max 1023 aifs 2 txop 0
  155. [ 34.550000] wlcore: cmd configure (3)
  156. [ 34.555000] wlcore: acx tid config
  157. [ 34.555000] wlcore: cmd configure (9)
  158. [ 34.565000] wlcore: mac80211 bss info role 0 changed 0x2000
  159. [ 34.565000] wlcore: acx arp ip filter, enable: 0
  160. [ 34.575000] wlcore: cmd configure (25)
  161. [ 34.575000] wlcore: mac80211 config psm off power 0 in use changed 0xffffff9f
  162. [ 34.585000] wlcore: mac80211 configure filter changed 0 total 80000000
  163. [ 34.585000] wlcore: acx group address tbl
  164. [ 34.595000] wlcore: mac80211 config psm off power 0 in use changed 0x10
  165. [ 34.600000] wlcore: cmd configure (63)
  166. [ 34.605000] wlcore: mac80211 configure filter changed 0 total 80000000
  167. [ 34.610000] wlcore: acx group address tbl
  168. [ 34.610000] wlcore: cmd configure (63)
  169. [ 34.650000] wlcore: elp work
  170. [ 34.650000] wlcore: chip to elp
  171. [ 57.995000] wlcore: mac80211 config psm off power 0 idle changed 0x100
  172. [ 57.995000] wlcore: waking up chip from elp
  173. [ 58.010000] wlcore: wakeup time: 15 ms
  174. [ 58.010000] wlcore: mac80211 hw scan
  175. [ 58.010000] wlcore: cmd template_set 9 (role 0)
  176. [ 58.070000] wlcore: EVENT on mbox 0
  177. [ 58.070000] wlcore: MBOX vector: 0x400
  178. [ 58.070000] wlcore: status: 0x2e
  179. [ 58.105000] wlcore: elp work
  180. [ 58.105000] wlcore: chip to elp
  181. [ 71.730000] cfg80211: Calling CRDA for country: PT
  182. [ 71.750000] cfg80211: Regulatory domain changed to country: PT
  183. [ 71.750000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  184. [ 71.765000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  185. [ 71.765000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  186. [ 71.780000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  187. [ 71.780000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
  188. [ 71.795000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
  189. [ 71.845000] wlcore: mac80211 hw scan
  190. [ 71.845000] wlcore: waking up chip from elp
  191. [ 71.860000] wlcore: wakeup time: 15 ms
  192. [ 71.860000] wlcore: cmd template_set 9 (role 0)
  193. [ 71.900000] wlcore: EVENT on mbox 1
  194. [ 71.900000] wlcore: MBOX vector: 0x400
  195. [ 71.900000] wlcore: status: 0x25
  196. [ 71.915000] wlan0: authenticate with 88:43:e1:57:79:c0
  197. [ 71.915000] wlcore: mac80211 config psm off power 0 in use changed 0x100
  198. [ 71.920000] wlcore: mac80211 add chanctx 9 (type 1)
  199. [ 71.925000] wlcore: mac80211 assign chanctx (role 0) 9 (type 1)
  200. [ 71.930000] wlcore: mac80211 bss info role 0 changed 0x40000
  201. [ 71.935000] wlcore: mac80211 bss info role 0 changed 0x4000
  202. [ 71.940000] wlcore: mac80211 bss info role 0 changed 0xe0
  203. [ 71.945000] wlcore: changed_bssid: 88:43:e1:57:79:c0, aid: 0, bcn_int: 102, brates: 0xf sta_rate_set: 0x0
  204. [ 71.950000] wlcore: acx rate policies
  205. [ 71.955000] wlcore: basic_rate: 0x1, full_rate: 0x1
  206. [ 71.960000] wlcore: cmd configure (27)
  207. [ 71.965000] wlcore: cmd configure (27)
  208. [ 71.965000] wlcore: cmd configure (27)
  209. [ 71.975000] wlcore: cmd template_set 0 (role 0)
  210. [ 71.975000] wlcore: cmd template_set 5 (role 0)
  211. [ 71.985000] wlcore: cmd role start sta 0
  212. [ 71.985000] wlcore: role start: roleid=0, hlid=1, session=1 basic_rate_set: 0x27, remote_rates: 0x1
  213. [ 71.995000] wlcore: cmd role stop sta 0
  214. [ 71.995000] wlcore: cmd role start sta 0
  215. [ 72.000000] wlcore: role start: roleid=0, hlid=1, session=2 basic_rate_set: 0x27, remote_rates: 0x1
  216. [ 72.010000] wlcore: EVENT on mbox 0
  217. [ 72.010000] wlcore: MBOX vector: 0x8000
  218. [ 72.010000] wlcore: mac80211 sta 0 state=0->1
  219. [ 72.015000] wlcore: cmd roc 9 (0)
  220. [ 72.025000] wlcore: EVENT on mbox 1
  221. [ 72.025000] wlcore: MBOX vector: 0x80000000
  222. [ 72.025000] wlcore: REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID
  223. [ 72.030000] wlan0: send auth to 88:43:e1:57:79:c0 (try 1/3)
  224. [ 72.050000] wlan0: authenticated
  225. [ 72.050000] wlcore: mac80211 sta 0 state=1->2
  226. [ 72.125000] wlan0: associate with 88:43:e1:57:79:c0 (try 1/3)
  227. [ 72.130000] wlan0: RX AssocResp from 88:43:e1:57:79:c0 (capab=0x431 status=0 aid=1)
  228. [ 72.130000] wlcore: mac80211 sta 0 state=2->3
  229. [ 72.140000] wlcore: mac80211 conf tx 2
  230. [ 72.140000] wlcore: acx ac cfg 0 cw_ming 15 cw_max 1023 aifs 3 txop 0
  231. [ 72.150000] wlcore: cmd configure (3)
  232. [ 72.150000] wlcore: acx tid config
  233. [ 72.150000] wlcore: cmd configure (9)
  234. [ 72.160000] wlcore: mac80211 conf tx 3
  235. [ 72.160000] wlcore: acx ac cfg 1 cw_ming 15 cw_max 1023 aifs 7 txop 0
  236. [ 72.165000] wlcore: cmd configure (3)
  237. [ 72.175000] wlcore: acx tid config
  238. [ 72.175000] wlcore: cmd configure (9)
  239. [ 72.175000] wlcore: mac80211 conf tx 1
  240. [ 72.185000] wlcore: acx ac cfg 2 cw_ming 7 cw_max 15 aifs 2 txop 6016
  241. [ 72.190000] wlcore: cmd configure (3)
  242. [ 72.190000] wlcore: acx tid config
  243. [ 72.195000] wlcore: cmd configure (9)
  244. [ 72.205000] wlcore: mac80211 conf tx 0
  245. [ 72.205000] wlcore: acx ac cfg 3 cw_ming 3 cw_max 7 aifs 2 txop 3264
  246. [ 72.210000] wlcore: cmd configure (3)
  247. [ 72.215000] wlcore: acx tid config
  248. [ 72.215000] wlcore: cmd configure (9)
  249. [ 72.230000] wlcore: mac80211 bss info role 0 changed 0x200d
  250. [ 72.230000] wlcore: acx slot
  251. [ 72.235000] wlcore: cmd configure (2)
  252. [ 72.240000] wlcore: acx_set_preamble
  253. [ 72.240000] wlcore: cmd configure (30)
  254. [ 72.250000] wlcore: cmd template_set 6 (role 0)
  255. [ 72.255000] wlcore: cmd template_set 2 (role 0)
  256. [ 72.255000] wlcore: acx connection monitor parameters: enabled
  257. [ 72.260000] wlcore: cmd configure (18)
  258. [ 72.270000] wlcore: acx keep alive mode: 1
  259. [ 72.270000] wlcore: cmd configure (44)
  260. [ 72.280000] wlcore: acx aid
  261. [ 72.280000] wlcore: cmd configure (5)
  262. [ 72.280000] wlcore: cmd template_set 7 (role 0)
  263. [ 72.290000] wlcore: acx keep alive config
  264. [ 72.290000] wlcore: cmd configure (45)
  265. [ 72.290000] wlcore: leaving psm
  266. [ 72.295000] wlcore: acx bet enable
  267. [ 72.305000] wlcore: cmd configure (41)
  268. [ 72.305000] wlcore: cmd set ps mode
  269. [ 72.305000] wlcore: acx rate policies
  270. [ 72.310000] wlcore: basic_rate: 0x1, full_rate: 0x1ffeff
  271. [ 72.320000] wlcore: cmd configure (27)
  272. [ 72.325000] wlcore: cmd configure (27)
  273. [ 72.325000] wlcore: cmd configure (27)
  274. [ 72.325000] wlcore: acx ht capabilities setting sta supp: 1 sta cap: 2092
  275. [ 72.335000] wlcore: cmd configure (48)
  276. [ 72.335000] wlcore: acx ht information setting
  277. [ 72.340000] wlcore: cmd configure (49)
  278. [ 72.350000] wlcore: acx arp ip filter, enable: 0
  279. [ 72.350000] wlcore: cmd configure (25)
  280. [ 72.360000] wlan0: associated
  281. [ 72.365000] cfg80211: Calling CRDA for country: PT
  282. [ 72.365000] wlcore: mac80211 bss info role 0 changed 0x100000
  283. [ 72.385000] cfg80211: Regulatory domain changed to country: PT
  284. [ 72.385000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  285. [ 72.395000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  286. [ 72.410000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  287. [ 72.410000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  288. [ 72.425000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
  289. [ 72.425000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
  290. [ 72.435000] wlan0: deauthenticated from 88:43:e1:57:79:c0 (Reason: 23)
  291. [ 72.440000] wlcore: mac80211 sta 0 state=3->2
  292. [ 72.455000] wlcore: mac80211 sta 0 state=2->1
  293. [ 72.455000] wlcore: mac80211 sta 0 state=1->0
  294. [ 72.455000] wlcore: cmd croc (0)
  295. [ 72.480000] wlcore: mac80211 bss info role 0 changed 0x209f
  296. [ 72.480000] wlcore: acx rate policies
  297. [ 72.480000] wlcore: basic_rate: 0x1, full_rate: 0x1
  298. [ 72.495000] wlcore: cmd configure (27)
  299. [ 72.500000] wlcore: cmd configure (27)
  300. [ 72.500000] wlcore: cmd configure (27)
  301. [ 72.500000] wlcore: cmd role stop sta 0
  302. [ 72.515000] wlcore: acx slot
  303. [ 72.515000] wlcore: cmd configure (2)
  304. [ 72.530000] wlcore: acx_set_preamble
  305. [ 72.530000] wlcore: cmd configure (30)
  306. [ 72.530000] wlcore: acx_set_ctsprotect
  307. [ 72.540000] wlcore: cmd configure (28)
  308. [ 72.545000] wlcore: acx connection monitor parameters: disabled
  309. [ 72.545000] wlcore: cmd configure (18)
  310. [ 72.555000] wlcore: acx keep alive mode: 0
  311. [ 72.555000] wlcore: cmd configure (44)
  312. [ 72.570000] wlcore: acx keep alive config
  313. [ 72.570000] wlcore: cmd configure (45)
  314. [ 72.580000] wlcore: acx arp ip filter, enable: 0
  315. [ 72.580000] wlcore: cmd configure (25)
  316. [ 72.595000] wlcore: EVENT on mbox 0
  317. [ 72.595000] wlcore: MBOX vector: 0x8000
  318. [ 72.595000] wlcore: mac80211 conf tx 0
  319. [ 72.610000] wlcore: acx ac cfg 3 cw_ming 15 cw_max 1023 aifs 2 txop 0
  320. [ 72.610000] wlcore: cmd configure (3)
  321. [ 72.620000] wlcore: acx tid config
  322. [ 72.620000] wlcore: cmd configure (9)
  323. [ 72.620000] wlcore: mac80211 conf tx 1
  324. [ 72.630000] wlcore: acx ac cfg 2 cw_ming 15 cw_max 1023 aifs 2 txop 0
  325. [ 72.635000] wlcore: cmd configure (3)
  326. [ 72.635000] wlcore: acx tid config
  327. [ 72.645000] wlcore: cmd configure (9)
  328. [ 72.645000] wlcore: mac80211 conf tx 2
  329. [ 72.645000] wlcore: acx ac cfg 0 cw_ming 15 cw_max 1023 aifs 2 txop 0
  330. [ 72.660000] wlcore: cmd configure (3)
  331. [ 72.660000] wlcore: acx tid config
  332. [ 72.660000] wlcore: cmd configure (9)
  333. [ 72.675000] wlcore: mac80211 conf tx 3
  334. [ 72.675000] wlcore: acx ac cfg 1 cw_ming 15 cw_max 1023 aifs 2 txop 0
  335. [ 72.690000] wlcore: cmd configure (3)
  336. [ 72.690000] wlcore: acx tid config
  337. [ 72.690000] wlcore: cmd configure (9)
  338. [ 72.705000] wlcore: mac80211 bss info role 0 changed 0x4000
  339. [ 72.705000] wlcore: mac80211 unassign chanctx (role 0) 9 (type 1)
  340. [ 72.715000] wlcore: mac80211 remove chanctx 9 (type 1)
  341. [ 72.715000] wlcore: mac80211 config psm off power 0 idle changed 0x100
  342. [ 72.725000] cfg80211: Calling CRDA to update world regulatory domain
  343. [ 72.725000] cfg80211: World regulatory domain updated:
  344. [ 72.735000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  345. [ 72.745000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  346. [ 72.745000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  347. [ 72.755000] wlcore: elp work
  348. [ 72.755000] wlcore: chip to elp
  349. [ 72.755000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  350. [ 72.770000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  351. [ 72.770000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  352. [ 72.780000] cfg80211: Calling CRDA for country: PT
  353. [ 72.785000] cfg80211: Regulatory domain changed to country: PT
  354. [ 72.785000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  355. [ 72.795000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  356. [ 72.795000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  357. [ 72.810000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  358. [ 72.810000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
  359. [ 72.825000] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
  360. [ 73.245000] wlcore: mac80211 hw scan
  361. [ 73.245000] wlcore: waking up chip from elp
  362. [ 73.255000] wlcore: wakeup time: 10 ms
  363. [ 73.255000] wlcore: cmd template_set 9 (role 0)
  364. [ 73.295000] wlcore: EVENT on mbox 1
  365. [ 73.295000] wlcore: MBOX vector: 0x400
  366. [ 73.300000] wlcore: status: 0x25
  367. [ 73.330000] wlcore: elp work
  368. [ 73.330000] wlcore: chip to elp
  369. [ 78.315000] wlcore: mac80211 hw scan
  370. [ 78.315000] wlcore: waking up chip from elp
  371. [ 78.320000] wlcore: wakeup time: 5 ms
  372. [ 78.320000] wlcore: cmd template_set 9 (role 0)
  373. [ 78.360000] wlcore: EVENT on mbox 0
  374. [ 78.365000] wlcore: MBOX vector: 0x400
  375. [ 78.365000] wlcore: status: 0x2e
  376. [ 78.370000] wlcore: wl1271_op_sched_scan_start
  377. [ 78.370000] wlcore: cmd sched_scan scan config
  378. [ 78.375000] wlcore: cmd sched scan ssid list
  379. [ 78.385000] wlcore: cmd template_set 2 (role 0)
  380. [ 78.385000] wlcore: cmd template_set 3 (role 0)
  381. [ 78.400000] wlcore: cmd periodic scan start
  382. [ 78.435000] wlcore: elp work
  383. [ 78.435000] wlcore: chip to elp
Advertisement
Add Comment
Please, Sign In to add comment