API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 16th, 2015
192
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.67 KB | None | 0 0
raw download clone embed print report
  1. ===================================================================
  2. MT7621 stage1 code 16:20:29 (ASIC)
  3. CPU=50000000 HZ BUS=16666666 HZ
  4. ==================================================================
  5. Change MPLL source from XTAL to CR...
  6. do MEMPLL setting..
  7. MEMPLL Config : 0x21000000
  8. 3PLL mode + External loopback
  9. === XTAL-40Mhz === DDR-800Mhz ===
  10. PLL2 FB_DL: 0xf, 1/0 = 569/455 3D000000
  11. PLL3 FB_DL: 0x11, 1/0 = 642/382 45000000
  12. PLL4 FB_DL: 0x12, 1/0 = 573/451 49000000
  13. do DDR setting..[00320000]
  14. Apply DDR3 Setting...(use default AC)
  15. 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
  16. --------------------------------------------------------------------------------
  17. 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  18. 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  19. 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  20. 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  21. 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  22. 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  23. 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  24. 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  25. 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  26. 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  27. 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  28. 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  29. 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  30. 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  31. 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
  32. 000F:| 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1
  33. 0010:| 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0
  34. 0011:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
  35. 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  36. 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  37. 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  38. 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  39. 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  40. 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  41. 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  42. 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  43. 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  44. 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  45. 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  46. 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  47. 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  48. 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  49. rank 0 coarse = 16
  50. rank 0 fine = 56
  51. B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0
  52. opt_dle value:10
  53. DRAMC_R0DELDLY[018]=00002D2E
  54. ==================================================================
  55. RX DQS perbit delay software calibration
  56. ==================================================================
  57. 1.0-15 bit dq delay value
  58. ==================================================================
  59. bit| 0 1 2 3 4 5 6 7 8 9
  60. --------------------------------------
  61. 0 | 9 7 9 10 7 8 7 6 5 6
  62. 10 | 6 9 6 9 6 10
  63. --------------------------------------
  64.  
  65. ==================================================================
  66. 2.dqs window
  67. x=pass dqs delay value (min~max)center
  68. y=0-7bit DQ of every group
  69. input delay:DQS0 =46 DQS1 = 45
  70. ==================================================================
  71. bit DQS0 bit DQS1
  72. 0 (1~91)46 8 (1~86)43
  73. 1 (1~90)45 9 (1~85)43
  74. 2 (1~90)45 10 (1~88)44
  75. 3 (1~91)46 11 (1~89)45
  76. 4 (1~91)46 12 (1~86)43
  77. 5 (1~90)45 13 (2~86)44
  78. 6 (1~85)43 14 (1~88)44
  79. 7 (1~90)45 15 (1~90)45
  80. ==================================================================
  81. 3.dq delay value last
  82. ==================================================================
  83. bit| 0 1 2 3 4 5 6 7 8 9
  84. --------------------------------------
  85. 0 | 9 8 10 10 7 9 10 7 7 8
  86. 10 | 7 9 8 10 7 10
  87. ==================================================================
  88. ==================================================================
  89. TX perbyte calibration
  90. ==================================================================
  91. DQS loop = 15, cmp_err_1 = ffff0000
  92. dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
  93. dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
  94. DQ loop=15, cmp_err_1 = ffff0000
  95. dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
  96. dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
  97. byte:0, (DQS,DQ)=(8,8)
  98. byte:1, (DQS,DQ)=(8,8)
  99. 20,data:88
  100. [EMI] DRAMC calibration passed
  101.  
  102. ===================================================================
  103. MT7621 stage1 code done
  104. CPU=50000000 HZ BUS=16666666 HZ
  105. ===================================================================
  106.  
  107. GPIO Init:
  108. UARTF_SHARE_MODE:GPIO
  109. GPIO_MODE_REG:0xc200201c
  110. ReadyLED Bit:0x2000
  111.  
  112.  
  113. U-Boot 1.1.3 (Aug 3 2015 - 10:33:43)
  114.  
  115. Board:Ralink APSoC DRAM: Memory Testing..256 MB
  116. relocate_code Pointer at: 8ffb0000
  117.  
  118. Config XHCI 40M PLL
  119. flash manufacture id: ef, device id 40 18
  120. Warning: un-recognized chip ID, please update bootloader!
  121. *** Warning - bad CRC, using default environment
  122.  
  123. _______________________________________________________________
  124. | ____ _ ____ |
  125. | | _ \ __ _ _ __ __| | ___ _ __ __ _| __ ) _____ __ |
  126. | | |_) / _` | '_ \ / _` |/ _ \| '__/ _` | _ \ / _ \ \/ / |
  127. | | __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) > < |
  128. | |_| \__,_|_| |_|\__,_|\___/|_| \__,_|____/ \___/_/\_\ |
  129. | |
  130. | Ralink/MTK SDK Plantform |
  131. | Copyright 2005-2015 |
  132. | Board:Ralink RT305x |
  133. | |
  134. | <www.zbt-china.com> |
  135. |______________________________________________________________|
  136.  
  137. ============================================
  138. Ralink UBoot Version: 4.2.S.1
  139. --------------------------------------------
  140. ASIC 7621_MP (MAC to MT7530 Mode)
  141. DRAM_CONF_FROM: Auto-Detection
  142. DRAM_TYPE: DDR3
  143. DRAM bus: 16 bit
  144. Xtal Mode=3 OCP Ratio=1/3
  145. Flash component: SPI Flash
  146. Date:Aug 3 2015 Time:10:33:43
  147. ============================================
  148. CPU Speed: 880 MHZ
  149. RAM Size:512 Mbytes
  150.  
  151. Build Date:Aug 3 2015 Time:10:33:43
  152. ============================================
  153. #Reset_MT7530
  154. set LAN/WAN LLLLW
  155.  
  156. GPIO Init:
  157. UARTF_SHARE_MODE:GPIO
  158. GPIO_MODE_REG:0xc200201c
  159. ReadyLED Bit:0x2000
  160.  
  161. Please choose the operation:
  162. 1: Load system code to SDRAM via TFTP.
  163. 2: Load system code then write to Flash via TFTP.
  164. 3: Boot system code via Flash (default).
  165. 4: Entr boot command line interface.
  166. 7: Load Boot Loader code then write to Flash via Serial.
  167. 9: Load Boot Loader code then write to Flash via TFTP.
  168.  
  169. You choosed 2
  170. 0
  171.  
  172.  
  173. 2: System Load Linux Kernel then write to Flash via TFTP.
  174. Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
  175. Please Input new ones /or Ctrl-C to discard
  176. Input device IP (192.168.1.1) ==:192.168.1.1
  177. Input server IP (192.168.1.100) ==:192.168.1.100
  178. Input Linux Kernel filename () ==:1234.bin
  179.  
  180. netboot_common, argc= 3
  181.  
  182. NetTxPacket = 0x8FFE4580
  183.  
  184. KSEG1ADDR(NetTxPacket) = 0xAFFE4580
  185.  
  186. NetLoop,call eth_halt !
  187.  
  188. NetLoop,call eth_init !
  189. Trying Eth0 (10/100-M)
  190.  
  191. Waitting for RX_DMA_BUSY status Start... done
  192.  
  193.  
  194. ETH_STATE_ACTIVE!!
  195. Using Eth0 (10/100-M) device
  196. TFTP from server 192.168.1.100; our IP address is 192.168.1.1
  197. Filename '1234.bin'.
  198.  
  199. TIMEOUT_COUNT=10,Load address: 0x80100000
  200. Loading: Got ARP REQUEST, return our IP
  201. checksum bad
  202. checksum bad
  203. Got ARP REQUEST, return our IP
  204. checksum bad
  205. checksum bad
  206. Got ARP REQUEST, return our IP
  207. checksum bad
  208. checksum bad
  209. T Got ARP REPLY, set server/gtwy eth addr (38:63:bb:8c:11:d7)
  210. Got it
  211. ######################Got ARP REQUEST, return our IP
  212. ##Got ARP REQUEST, return our IP
  213. #########################################
  214. #################################################################
  215. #################################################################
  216. #################################################################
  217. #################################################################
  218. #################################################################
  219. #################################################################
  220. #################################################################
  221. #################################################################
  222. #################################################################
  223. #################################################################
  224. ##
  225. done
  226. Bytes transferred = 3670020 (380004 hex)
  227. NetBootFileXferSize= 00380004
  228. do_tftpb ok
  229. CFG_ENV_IS_IN_SPI select
  230. ........................................................
  231. ........................................................
  232. .
  233. .
  234. Done!
  235.  
  236. Press Reset button enter upgrade mode!
  237. ## Booting image at bfc50000 ...
  238. Image Name: MIPS OpenWrt Linux-3.18.23
  239. Image Type: MIPS Linux Kernel Image (lzma compressed)
  240. Data Size: 1296491 Bytes = 1.2 MB
  241. Load Address: 80001000
  242. Entry Point: 80001000
  243. Verifying Checksum ... OK
  244. Uncompressing Kernel Image ... OK
  245. No initrd
  246. ## Transferring control to Linux (at address 80001000) ...
  247. ## Giving linux memsize in MB, 256
  248.  
  249. Starting kernel ...
  250.  
  251. [ 0.000000] Linux version 3.18.23 (anton@probook) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47351) ) #1 SMP Sun Nov 15 21:31:46 MSK 2015
  252. [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  253. [ 0.000000] bootconsole [early0] enabled
  254. [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  255. [ 0.000000] MIPS: machine is ZBT-WG2626
  256. [ 0.000000] Determined physical RAM map:
  257. [ 0.000000] memory: 1c000000 @ 00000000 (usable)
  258. [ 0.000000] memory: 04000000 @ 20000000 (usable)
  259. [ 0.000000] Initrd not found or empty - disabling initrd
  260. [ 0.000000] Zone ranges:
  261. [ 0.000000] Normal [mem 0x00000000-0x0fffffff]
  262. [ 0.000000] HighMem [mem 0x10000000-0x23ffffff]
  263. [ 0.000000] Movable zone start for each node
  264. [ 0.000000] Early memory node ranges
  265. [ 0.000000] node 0: [mem 0x00000000-0x1bffffff]
  266. [ 0.000000] node 0: [mem 0x20000000-0x23ffffff]
  267. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23ffffff]
  268. [ 0.000000] Detected 0 available secondary CPU(s)
  269. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  270. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  271. [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  272. [ 0.000000] PERCPU: Embedded 9 pages/cpu @8148c000 s5824 r8192 d22848 u36864
  273. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130560
  274. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  275. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  276. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  277. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  278. [ 0.000000] Writing ErrCtl register=0000070c
  279. [ 0.000000] Readback ErrCtl register=0000070c
  280. [ 0.000000] Memory: 515204K/524288K available (2966K kernel code, 152K rwdata, 552K rodata, 220K init, 239K bss, 9084K reserved, 262144K highmem)
  281. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  282. [ 0.000000] Hierarchical RCU implementation.
  283. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  284. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  285. [ 0.000000] NR_IRQS:256
  286. [ 0.000000] gic: revision 3.0
  287. [ 0.000000] CPU Clock: 880MHz
  288. [ 0.000000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
  289. [ 0.060000] pid_max: default: 32768 minimum: 301
  290. [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  291. [ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  292. [ 0.090000] Brought up 1 CPUs
  293. [ 0.100000] pinctrl core: initialized pinctrl subsystem
  294. [ 0.110000] NET: Registered protocol family 16
  295. [ 0.120000] rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio"
  296. [ 0.130000] pull PCIe RST: RALINK_RSTCTRL = 0
  297. [ 0.430000] release PCIe RST: RALINK_RSTCTRL = 7000000
  298. [ 0.440000] ***** Xtal 40MHz *****
  299. [ 0.440000] release PCIe RST: RALINK_RSTCTRL = 7000000
  300. [ 0.450000] Port 0 N_FTS = 1b102800
  301. [ 0.450000] Port 1 N_FTS = 1b102800
  302. [ 0.460000] Port 2 N_FTS = 1b102800
  303. [ 1.610000] -> 21007f2
  304. [ 1.620000] PCIE0 enabled
  305. [ 1.620000] PCIE1 enabled
  306. [ 1.630000] PCIE2 enabled
  307. [ 1.630000] PCI host bridge /pcie@1e140000 ranges:
  308. [ 1.640000] MEM 0x0000000060000000..0x000000006fffffff
  309. [ 1.650000] IO 0x000000001e160000..0x000000001e16ffff
  310. [ 1.660000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  311. [ 1.670000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  312. [ 1.680000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  313. [ 1.690000] PCI host bridge to bus 0000:00
  314. [ 1.690000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  315. [ 1.700000] pci_bus 0000:00: root bus resource [io 0xffffffff]
  316. [ 1.710000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  317. [ 1.720000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  318. [ 1.730000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  319. [ 1.740000] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  320. [ 1.750000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  321. [ 1.760000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  322. [ 1.770000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  323. [ 1.780000] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  324. [ 1.790000] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000]
  325. [ 1.800000] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000]
  326. [ 1.810000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  327. [ 1.820000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
  328. [ 1.830000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
  329. [ 1.840000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
  330. [ 1.850000] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
  331. [ 1.860000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
  332. [ 1.870000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
  333. [ 1.880000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
  334. [ 1.890000] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
  335. [ 1.900000] pci 0000:00:02.0: BAR 7: no space for [io size 0x1000]
  336. [ 1.910000] pci 0000:00:02.0: BAR 7: failed to assign [io size 0x1000]
  337. [ 1.920000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
  338. [ 1.930000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
  339. [ 1.940000] pci 0000:00:00.0: PCI bridge to [bus 01]
  340. [ 1.940000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
  341. [ 1.950000] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
  342. [ 1.960000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
  343. [ 1.970000] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
  344. [ 1.980000] pci 0000:00:01.0: PCI bridge to [bus 02]
  345. [ 1.980000] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
  346. [ 1.990000] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
  347. [ 2.000000] pci 0000:03:00.0: BAR 6: assigned [mem 0x60500000-0x6050ffff pref]
  348. [ 2.010000] pci 0000:03:00.0: BAR 5: assigned [mem 0x60400000-0x604001ff]
  349. [ 2.020000] pci 0000:03:00.0: BAR 4: no space for [io size 0x0020]
  350. [ 2.030000] pci 0000:03:00.0: BAR 4: failed to assign [io size 0x0020]
  351. [ 2.040000] pci 0000:03:00.0: BAR 0: no space for [io size 0x0008]
  352. [ 2.050000] pci 0000:03:00.0: BAR 0: failed to assign [io size 0x0008]
  353. [ 2.060000] pci 0000:03:00.0: BAR 2: no space for [io size 0x0008]
  354. [ 2.070000] pci 0000:03:00.0: BAR 2: failed to assign [io size 0x0008]
  355. [ 2.080000] pci 0000:03:00.0: BAR 1: no space for [io size 0x0004]
  356. [ 2.090000] pci 0000:03:00.0: BAR 1: failed to assign [io size 0x0004]
  357. [ 2.100000] pci 0000:03:00.0: BAR 3: no space for [io size 0x0004]
  358. [ 2.110000] pci 0000:03:00.0: BAR 3: failed to assign [io size 0x0004]
  359. [ 2.120000] pci 0000:00:02.0: PCI bridge to [bus 03]
  360. [ 2.120000] pci 0000:00:02.0: bridge window [mem 0x60400000-0x604fffff]
  361. [ 2.130000] pci 0000:00:02.0: bridge window [mem 0x60500000-0x605fffff pref]
  362. [ 2.140000] BAR0 at slot 0 = 0
  363. [ 2.140000] bus=0x0, slot = 0x0
  364. [ 2.150000] BAR0 at slot 1 = 0
  365. [ 2.150000] bus=0x0, slot = 0x1
  366. [ 2.160000] BAR0 at slot 2 = 0
  367. [ 2.160000] bus=0x0, slot = 0x2
  368. [ 2.170000] bus=0x1, slot = 0x0, irq=0xff
  369. [ 2.170000] bus=0x2, slot = 0x1, irq=0xff
  370. [ 2.180000] bus=0x3, slot = 0x2, irq=0x0
  371. [ 2.180000] Switched to clocksource MIPS
  372. [ 2.190000] NET: Registered protocol family 2
  373. [ 2.190000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  374. [ 2.210000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  375. [ 2.220000] TCP: Hash tables configured (established 2048 bind 2048)
  376. [ 2.230000] TCP: reno registered
  377. [ 2.240000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  378. [ 2.250000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  379. [ 2.260000] NET: Registered protocol family 1
  380. [ 2.270000] futex hash table entries: 256 (order: 2, 16384 bytes)
  381. [ 2.290000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  382. [ 2.300000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  383. [ 2.320000] msgmni has been set to 494
  384. [ 2.350000] bounce: pool size: 64 pages
  385. [ 2.360000] io scheduler noop registered
  386. [ 2.370000] io scheduler deadline registered (default)
  387. [ 2.380000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  388. [ 2.390000] console [ttyS0] disabled
  389. [ 2.400000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 34, base_baud = 3125000) is a 16550A
  390. [ 2.410000] console [ttyS0] enabled
  391. [ 2.410000] console [ttyS0] enabled
  392. [ 2.430000] bootconsole [early0] disabled
  393. [ 2.430000] bootconsole [early0] disabled
  394. [ 2.450000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
  395. [ 2.460000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
  396. [ 2.470000] m25p80 spi32766.0: using chunked io
  397. [ 2.480000] 4 ofpart partitions found on MTD device spi32766.0
  398. [ 2.490000] Creating 4 MTD partitions on "spi32766.0":
  399. [ 2.500000] 0x000000000000-0x000000030000 : "u-boot"
  400. [ 2.510000] 0x000000030000-0x000000040000 : "u-boot-env"
  401. [ 2.520000] 0x000000040000-0x000000050000 : "factory"
  402. [ 2.530000] 0x000000050000-0x000001000000 : "firmware"
  403. [ 2.570000] 2 uimage-fw partitions found on MTD device firmware
  404. [ 2.580000] 0x000000050000-0x00000018c8ab : "kernel"
  405. [ 2.590000] 0x00000018c8ab-0x000001000000 : "rootfs"
  406. [ 2.600000] mtd: device 5 (rootfs) set to be root filesystem
  407. [ 2.620000] 1 squashfs-split partitions found on MTD device rootfs
  408. [ 2.630000] 0x0000003a0000-0x000001000000 : "rootfs_data"
  409. [ 2.640000] netif_napi_add() called with weight 128 on device eth%d
  410. [ 2.660000] change HW-TRAP to 0x17ccf
  411. [ 2.670000] libphy: mdio: probed
  412. [ 2.690000] ralink_soc_eth 1e100000.ethernet: loaded mt7530 driver
  413. [ 2.710000] ralink_soc_eth 1e100000.ethernet eth0: ralink at 0xbe100000, irq 11
  414. [ 2.720000] mt7621_wdt 1e000100.wdt: Initialized
  415. [ 2.730000] TCP: cubic registered
  416. [ 2.740000] NET: Registered protocol family 10
  417. [ 2.750000] NET: Registered protocol family 17
  418. [ 2.760000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  419. [ 2.790000] 8021q: 802.1Q VLAN Support v1.8
  420. [ 2.800000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  421. [ 2.820000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  422. [ 2.830000] Freeing unused kernel memory: 220K (80399000 - 803d0000)
  423. [ 3.340000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
  424. [ 3.340000]
  425. [ 3.340000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
  426. [ 3.340000]
  427. [ 6.040000] ralink_soc_eth 1e100000.ethernet eth0: port 3 link up
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!