Advertisement
Guest User

Untitled

a guest
Nov 29th, 2013
47
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.54 KB | None | 0 0
  1. smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-13-generic] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda ES.2
  6. Device Model: ST3750330NS
  7. Serial Number: 9QK0H049
  8. LU WWN Device Id: 5 000c50 00d493765
  9. Firmware Version: SN06
  10. User Capacity: 750,156,374,016 bytes [750 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 7200 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 2.6, 3.0 Gb/s
  16. Local Time is: Fri Nov 29 21:03:06 2013 EST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22. See vendor-specific Attribute list for marginal Attributes.
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 650) seconds.
  33. Offline data collection
  34. capabilities: (0x7b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 182) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x103d) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000f 065 058 044 Pre-fail Always - 150615106
  62. 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
  63. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 93
  64. 5 Reallocated_Sector_Ct 0x0033 092 092 036 Pre-fail Always - 171
  65. 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 27148908213
  66. 9 Power_On_Hours 0x0032 051 051 000 Old_age Always - 42939
  67. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 93
  69. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  70. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 121
  71. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 7
  72. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  73. 190 Airflow_Temperature_Cel 0x0022 046 040 045 Old_age Always In_the_past 54 (88 96 54 52 0)
  74. 194 Temperature_Celsius 0x0022 054 060 000 Old_age Always - 54 (0 22 0 0 0)
  75. 195 Hardware_ECC_Recovered 0x001a 043 029 000 Old_age Always - 150615106
  76. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
  77. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 2
  78. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 49 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 49 occurred at disk power-on lifetime: 42936 hours (1789 days + 0 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. -- -- -- -- -- -- --
  102. 40 51 00 18 89 af 06 Error: UNC at LBA = 0x06af8918 = 112167192
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. -- -- -- -- -- -- -- -- ---------------- --------------------
  107. 60 00 08 17 89 af 46 00 24d+12:53:52.345 READ FPDMA QUEUED
  108. 61 00 08 17 89 af 46 00 24d+12:53:52.344 WRITE FPDMA QUEUED
  109. 27 00 00 00 00 00 e0 00 24d+12:53:52.315 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  110. ec 00 00 00 00 00 a0 00 24d+12:53:52.314 IDENTIFY DEVICE
  111. ef 03 46 00 00 00 a0 00 24d+12:53:52.300 SET FEATURES [Set transfer mode]
  112.  
  113. Error 48 occurred at disk power-on lifetime: 42936 hours (1789 days + 0 hours)
  114. When the command that caused the error occurred, the device was active or idle.
  115.  
  116. After command completion occurred, registers were:
  117. ER ST SC SN CL CH DH
  118. -- -- -- -- -- -- --
  119. 40 51 00 17 89 af 06 Error: UNC at LBA = 0x06af8917 = 112167191
  120.  
  121. Commands leading to the command that caused the error were:
  122. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  123. -- -- -- -- -- -- -- -- ---------------- --------------------
  124. 60 00 08 17 89 af 46 00 24d+12:53:49.233 READ FPDMA QUEUED
  125. 60 00 08 0f 89 af 46 00 24d+12:53:48.584 READ FPDMA QUEUED
  126. 60 00 08 ff 88 af 46 00 24d+12:53:48.118 READ FPDMA QUEUED
  127. 60 00 08 f7 88 af 46 00 24d+12:53:47.860 READ FPDMA QUEUED
  128. 60 00 08 ef 88 af 46 00 24d+12:53:47.858 READ FPDMA QUEUED
  129.  
  130. Error 47 occurred at disk power-on lifetime: 42936 hours (1789 days + 0 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER ST SC SN CL CH DH
  135. -- -- -- -- -- -- --
  136. 40 51 00 17 89 af 06 Error: UNC at LBA = 0x06af8917 = 112167191
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  140. -- -- -- -- -- -- -- -- ---------------- --------------------
  141. 60 00 b8 ef 88 af 46 00 24d+12:53:36.584 READ FPDMA QUEUED
  142. 27 00 00 00 00 00 e0 00 24d+12:53:36.556 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  143. ec 00 00 00 00 00 a0 00 24d+12:53:36.555 IDENTIFY DEVICE
  144. ef 03 46 00 00 00 a0 00 24d+12:53:36.541 SET FEATURES [Set transfer mode]
  145. 27 00 00 00 00 00 e0 00 24d+12:53:36.514 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  146.  
  147. Error 46 occurred at disk power-on lifetime: 42936 hours (1789 days + 0 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER ST SC SN CL CH DH
  152. -- -- -- -- -- -- --
  153. 40 51 00 86 88 af 06 Error: UNC at LBA = 0x06af8886 = 112167046
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  157. -- -- -- -- -- -- -- -- ---------------- --------------------
  158. 60 00 00 ef 87 af 46 00 24d+12:53:30.083 READ FPDMA QUEUED
  159. 60 00 08 ff ff ff 4f 00 24d+12:53:30.071 READ FPDMA QUEUED
  160. 60 00 08 ff ff ff 4f 00 24d+12:53:30.065 READ FPDMA QUEUED
  161. 60 00 08 ff ff ff 4f 00 24d+12:53:30.056 READ FPDMA QUEUED
  162. 60 00 08 bf 43 40 4a 00 24d+12:53:30.051 READ FPDMA QUEUED
  163.  
  164. Error 45 occurred at disk power-on lifetime: 42936 hours (1789 days + 0 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. -- -- -- -- -- -- --
  170. 40 51 00 07 89 af 06 Error: UNC at LBA = 0x06af8907 = 112167175
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. -- -- -- -- -- -- -- -- ---------------- --------------------
  175. 60 00 b8 ef 88 af 46 00 24d+12:49:12.705 READ FPDMA QUEUED
  176. 60 00 00 ef 87 af 46 00 24d+12:49:07.554 READ FPDMA QUEUED
  177. 60 00 18 ef 85 af 46 00 24d+12:49:07.454 READ FPDMA QUEUED
  178. 60 00 50 ff ff ff 4f 00 24d+12:49:07.425 READ FPDMA QUEUED
  179. 60 00 08 ff ff ff 4f 00 24d+12:49:07.408 READ FPDMA QUEUED
  180.  
  181. SMART Self-test log structure revision number 1
  182. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  183.  
  184.  
  185. SMART Selective self-test log data structure revision number 1
  186. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  187. 1 0 0 Not_testing
  188. 2 0 0 Not_testing
  189. 3 0 0 Not_testing
  190. 4 0 0 Not_testing
  191. 5 0 0 Not_testing
  192. Selective self-test flags (0x0):
  193. After scanning selected spans, do NOT read-scan remainder of disk.
  194. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement