[    1.541706] Key type id_resolver registered
[    1.541721] Key type id_legacy registered
[    1.543230] bio: create slab <bio-1> at 1
[    1.545068] Btrfs loaded
[    1.545128] msgmni has been set to 749
[    1.547146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.547170] io scheduler noop registered
[    1.547182] io scheduler deadline registered
[    1.547449] io scheduler cfq registered (default)
[    1.552754] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    1.552768] crc32: self tests passed, processed 225944 bytes in 2598000 nsec
[    1.554798] crc32c: CRC_LE_BITS = 64
[    1.554813] crc32c: self tests passed, processed 225944 bytes in 949000 nsec
[    1.555234] BCM2708FB: allocated DMA memory 57940000
[    1.555259] BCM2708FB: allocated DMA channel 0 @ f2007000
[    1.579009] Console: switching to colour frame buffer device 170x48
[    1.588403] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
[    1.589638] usbcore: registered new interface driver smsc95xx
[    1.589862] usbcore: registered new interface driver cdc_ncm
[    1.589887] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.790148] Core Release: 2.80a
[    1.790177] Setting default values for core params
[    1.790225] Finished setting default values for core params
[    1.990395] Using Buffer DMA mode
[    1.990417] Periodic Transfer Interrupt Enhancement - disabled
[    1.990428] Multiprocessor Interrupt Enhancement - disabled
[    1.990439] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.990509] Dedicated Tx FIFOs mode
[    1.990736] dwc_otg: Microframe scheduler enabled
[    1.990789] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.990844] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.990911] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.990953] Init: Port Power? op_state=1
[    1.990963] Init: Power Port (0)
[    1.991078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.991099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.991115] usb usb1: Product: DWC OTG Controller
[    1.991129] usb usb1: Manufacturer: Linux 3.10.12+ dwc_otg_hcd
[    1.991143] usb usb1: SerialNumber: bcm2708_usb
[    1.991862] hub 1-0:1.0: USB hub found
[    1.991907] hub 1-0:1.0: 1 port detected
[    1.992281] dwc_otg: FIQ enabled
[    1.992298] dwc_otg: NAK holdoff enabled
[    1.992306] dwc_otg: FIQ split fix enabled
[    1.992325] Module dwc_common_port init
[    1.992833] bcm2835-cpufreq: min=700000 max=840000 cur=700000
[    1.992942] bcm2835-cpufreq: switching to governor performance
[    1.992957] bcm2835-cpufreq: switching to governor performance
[    1.994125] sdhci: Secure Digital Host Controller Interface driver
[    1.994138] sdhci: Copyright(c) Pierre Ossman
[    1.994209] sdhci: Enable low-latency mode
[    2.034474] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.034683] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.034874] hidraw: raw HID events driver (C) Jiri Kosina
[    2.035064] usbcore: registered new interface driver usbhid
[    2.035076] usbhid: USB HID core driver
[    2.035568] NET: Registered protocol family 17
[    2.035717] Key type dns_resolver registered
[    2.036368] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.039771] Waiting for root device /dev/mmcblk0p2...
[    2.177418] mmc0: read SD Status register (SSR) after 11 attempts
[    2.181139] mmc0: new high speed SDHC card at address aaaa
[    2.181618] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[    2.183578]  mmcblk0: p1 p2 p3
[    2.184622] Indeed it is in host mode hprt0 = 00021501
[    2.255969] device label xbian-beta2 devid 1 transid 2606 /dev/root
[    2.258268] btrfs: enabling auto defrag
[    2.258300] btrfs: use lzo compression
[    2.258310] btrfs: disk space caching is enabled
[    2.292188] Btrfs detected SSD devices, enabling SSD mode
[    2.307728] VFS: Mounted root (btrfs filesystem) on device 0:12.
[    2.309958] devtmpfs: mounted
[    2.310443] Freeing unused kernel memory: 132K (c048d000 - c04ae000)
[    2.364557] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.364741] Indeed it is in host mode hprt0 = 00001101
[    2.565474] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.565521] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.566517] hub 1-1:1.0: USB hub found
[    2.566832] hub 1-1:1.0: 3 ports detected
[    2.844804] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.946365] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.946395] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.950684] smsc95xx v1.0.4
[    3.013758] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:51:74:59
[    3.094841] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    3.196977] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8176
[    3.197007] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.197020] usb 1-1.2: Product: 802.11n WLAN Adapter
[    3.197033] usb 1-1.2: Manufacturer: Realtek
[    3.197045] usb 1-1.2: SerialNumber: 00e04c000001
[    3.274872] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[    3.376644] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
[    3.376673] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.376686] usb 1-1.3: Product: USB2.0 Hub
[    3.377709] hub 1-1.3:1.0: USB hub found
[    3.378258] hub 1-1.3:1.0: 4 ports detected
[    3.655019] usb 1-1.3.4: new high-speed USB device number 6 using dwc_otg
[    3.757225] usb 1-1.3.4: New USB device found, idVendor=05e3, idProduct=0608
[    3.757253] usb 1-1.3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.757267] usb 1-1.3.4: Product: USB2.0 Hub
[    3.758285] hub 1-1.3.4:1.0: USB hub found
[    3.758813] hub 1-1.3.4:1.0: 4 ports detected
[    3.814697] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.035067] usb 1-1.3.4.1: new high-speed USB device number 7 using dwc_otg
[    4.158418] device label xbian-beta2 devid 1 transid 2606 /dev/mmcblk0p2
[    4.173901] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    4.436296] device label xbian-beta2 devid 1 transid 2606 /dev/mmcblk0p2
[    5.700921] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[    6.637499] udevd[310]: starting version 175
[    9.804984] usb 1-1.3.4.1: unable to read config index 0 descriptor/all
[    9.805016] usb 1-1.3.4.1: can't read configurations, error -110
[    9.885050] usb 1-1.3.4.1: new high-speed USB device number 8 using dwc_otg
[   11.458847] usbcore: registered new interface driver rtl8192cu
[   11.952823] device label xbian-beta2 devid 1 transid 2606 /dev/mmcblk0p2
[   14.887022] ERROR::handle_hc_chhltd_intr_dma:2592: handle_hc_chhltd_intr_dma: Channel 2, DMA Mode -- ChHltd set, but reason for halting is unknown, hcint 0x00000012, intsts 0x04200001
[   14.887022]
[   19.892424] ERROR::handle_hc_chhltd_intr_dma:2592: handle_hc_chhltd_intr_dma: Channel 3, DMA Mode -- ChHltd set, but reason for halting is unknown, hcint 0x00000012, intsts 0x04200001
[   19.892424]
[   24.965041] usb 1-1.3.4.1: device descriptor read/64, error -110
[   30.077667] ERROR::handle_hc_chhltd_intr_dma:2592: handle_hc_chhltd_intr_dma: Channel 7, DMA Mode -- ChHltd set, but reason for halting is unknown, hcint 0x00000012, intsts 0x04200001
[   30.077667]
[   32.241635] init: wait-for-state (xbmcxbmc-loaded) main process (442) killed by TERM signal
[   35.078596] ERROR::handle_hc_chhltd_intr_dma:2592: handle_hc_chhltd_intr_dma: Channel 2, DMA Mode -- ChHltd set, but reason for halting is unknown, hcint 0x00000012, intsts 0x04200001
[   35.078596]
[   39.573478] init: wait-for-state (zram-swapxbmc-done) main process (106) killed by TERM signal
[   39.622713] init: failsafe main process (209) killed by TERM signal
[   39.690992] init: xbmc-failed-start main process (214) killed by TERM signal
[   40.155158] usb 1-1.3.4.1: device descriptor read/64, error -110
[   40.345054] usb 1-1.3.4.1: new high-speed USB device number 9 using dwc_otg
[   42.120295] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   42.142662] zram: Created 4 device(s) ...
[   42.642774] Adding 95228k swap on /dev/zram0.  Priority:20 extents:1 across:95228k SS
[   43.316167] Adding 251388k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:251388k SS
[   43.473607] device label xbian-beta2 devid 1 transid 2607 /dev/mmcblk0p2
[   44.002299] device label xbian-beta2 devid 1 transid 2607 /dev/mmcblk0p2
[   45.764753] usb 1-1.3.4.1: device not accepting address 9, error -71
[   45.845293] usb 1-1.3.4.1: new high-speed USB device number 10 using dwc_otg
[   51.264949] usb 1-1.3.4.1: device not accepting address 10, error -71
[   51.265528] hub 1-1.3.4:1.0: unable to enumerate USB device on port 1
[   51.345398] usb 1-1.3.4.3: new low-speed USB device number 11 using dwc_otg
[   51.454035] usb 1-1.3.4.3: New USB device found, idVendor=093a, idProduct=2510
[   51.454067] usb 1-1.3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   51.454082] usb 1-1.3.4.3: Product: USB Optical Mouse
[   51.454094] usb 1-1.3.4.3: Manufacturer: PixArt
[   51.462726] input: PixArt USB Optical Mouse as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4.3/1-1.3.4.3:1.0/input/input0
[   51.467170] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-bcm2708_usb-1.3.4.3/input0
[   51.545449] usb 1-1.3.4.4: new low-speed USB device number 12 using dwc_otg
[   51.680205] usb 1-1.3.4.4: New USB device found, idVendor=04d9, idProduct=1702
[   51.680234] usb 1-1.3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   51.680249] usb 1-1.3.4.4: Product: USB Keyboard
[   51.680262] usb 1-1.3.4.4: Manufacturer:
[   51.707639] input:   USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4.4/1-1.3.4.4:1.0/input/input1
[   51.708905] hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-bcm2708_usb-1.3.4.4/input0
[   51.742522] input:   USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4.4/1-1.3.4.4:1.1/input/input2
[   51.743507] hid-generic 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-bcm2708_usb-1.3.4.4/input1
[   52.698919] mousedev: PS/2 mouse device common for all mice
[   55.124743] frandom: Seeded global generator now (used by erandom)
[  400.811605] usb 1-1.3.4.1: new high-speed USB device number 13 using dwc_otg
[  401.544449] usb 1-1.3.4.1: New USB device found, idVendor=1058, idProduct=0730
[  401.544483] usb 1-1.3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  401.544498] usb 1-1.3.4.1: Product: My Passport 0730
[  401.544537] usb 1-1.3.4.1: Manufacturer: Western Digital
[  401.544551] usb 1-1.3.4.1: SerialNumber: 57584A314132315938393339
[  401.707204] usb-storage 1-1.3.4.1:1.0: USB Mass Storage device detected
[  401.711471] scsi0 : usb-storage 1-1.3.4.1:1.0
[  401.712926] usbcore: registered new interface driver usb-storage
[  403.617167] scsi 0:0:0:0: Direct-Access     WD       My Passport 0730 1016 PQ: 0 ANSI: 6
[  403.793547] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  406.463960] scsi 0:0:0:1: Enclosure         WD       SES Device       1016 PQ: 0 ANSI: 6
[  406.466918] scsi 0:0:0:1: Attached scsi generic sg1 type 13
[  406.468164] sd 0:0:0:0: [sda] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[  406.469328] sd 0:0:0:0: [sda] Write Protect is off
[  406.469365] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
[  406.473613] sd 0:0:0:0: [sda] No Caching mode page present
[  406.473650] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  406.479249] sd 0:0:0:0: [sda] No Caching mode page present
[  406.479329] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  406.506161]  sda: sda1 < sda5 >
[  406.518827] sd 0:0:0:0: [sda] No Caching mode page present
[  406.518862] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  406.518923] sd 0:0:0:0: [sda] Attached SCSI disk
[  409.557148] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)