Marvell>> printenv
baudrate=115200
loads_echo=0
rootpath=/mnt/ARM_FS/
CASset=min
MALLOC_len=1
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end);
ethmtu=1500
eth1mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
FanHysteresis=2
FanTempStart=58
bootargs_end=:::DB88FXX81:eth1:none
bootargs_root=root=/dev/sda1 rw
kernel@nand=nand read.e 2000000 900000 300000
console=console=ttyS0,115200 mtdparts=nand_mtd:0x100000@0(uboot)ro,0x20000@0xA0000(uboot_env),0x300000@0x900000(kernel),0x1400000@0)
ethprime=egiga1
filesize=1bda53
fileaddr=200000
netmask=255.255.255.0
ipaddr=192.168.1.11
serverip=192.168.1.100
ethaddr=00:D0:B8:11:C6:61
eth1addr=00:D0:B8:11:C6:61
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
hddPowerCtrl=no
enaAutoRecovery=no
ethact=egiga1
uboot_start=0x0
uboot_size=0xc0000
env_start=0xa0000
env_size=0x20000
kernel_start=0x100000
kernel_size=0x300000
initrd_start=0x540000
initrd_size=0x300000
bootcmd=run flash_load
flash_load=run make_boot_args load1 load2 boot
load1=nand read.e 0x2000000 $(kernel_start) $(kernel_size)
load2=nand read.e 0x4500000 $(initrd_start) $(initrd_size)
boot=bootm 0x2000000 0x4500000
make_boot_args=setenv bootargs console=ttyS0,115200 mtdparts=nand_mtd:;setenv bootargs $(bootargs)$(uboot_size)@$(uboot_start)(uboo;
iomega=123

Environment size: 2134/16380 bytes