ecu_reader_logger.cpp:15:58: error: SdFat.h: No such file or directory
ecu_reader_logger.cpp:16:23: error: SdFatUtil.h: No such file or directory
ecu_reader_logger.cpp:17:27: error: NewSoftSerial.h: No such file or directory
ecu_reader_logger.cpp:18:20: error: Canbus.h: No such file or directory
ecu_reader_logger.pde:-1: error: 'Sd2Card' does not name a type
ecu_reader_logger.pde:-1: error: 'SdVolume' does not name a type
ecu_reader_logger.pde:-1: error: 'SdFile' does not name a type
ecu_reader_logger.pde:-1: error: 'SdFile' does not name a type
ecu_reader_logger.pde:-1: error: 'NewSoftSerial' does not name a type
ecu_reader_logger.cpp: In function 'void error_P(const char*)':
ecu_reader_logger.pde:-1: error: 'PgmPrint' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'SerialPrintln_P' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'card' was not declared in this scope
ecu_reader_logger.cpp: At global scope:
ecu_reader_logger.pde:-1: error: 'NewSoftSerial' does not name a type
ecu_reader_logger.cpp: In function 'void setup()':
ecu_reader_logger.pde:-1: error: 'mySerial' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.

ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'CANSPEED_500' was not declared in this scope
ecu_reader_logger.cpp: In function 'void loop()':
ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'ENGINE_RPM' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.

ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'VEHICLE_SPEED' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.

ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'ENGINE_COOLANT_TEMP' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.

ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'THROTTLE' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.

ecu_reader_logger.pde:-1: error: 'file' was not declared in this scope
ecu_reader_logger.cpp: In function 'void logging()':
ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'CANSPEED_500' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.

ecu_reader_logger.pde:-1: error: 'card' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'SPI_HALF_SPEED' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'volume' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'card' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'root' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'volume' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'file' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'root' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'O_CREAT' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'O_EXCL' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'O_WRITE' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'file' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'file' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'ENGINE_RPM' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'VEHICLE_SPEED' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'ENGINE_COOLANT_TEMP' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'Canbus' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'THROTTLE' was not declared in this scope
ecu_reader_logger.cpp: In function 'void sd_test()':
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'card' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'SPI_HALF_SPEED' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'volume' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'card' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'root' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'volume' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'file' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'root' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'O_READ' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'file' was not declared in this scope
ecu_reader_logger.cpp: In function 'void gps_test()':
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.

ecu_reader_logger.cpp: In function 'void readline()':
ecu_reader_logger.pde:-1: error: 'mySerial' was not declared in this scope
ecu_reader_logger.cpp: In function 'void clear_lcd()':
ecu_reader_logger.pde:-1: error: 'sLCD' was not declared in this scope
ecu_reader_logger.pde:-1: error: 'BYTE' was not declared in this scope

As of Arduino 1.0, the 'BYTE' keyword is no longer supported.
Please use Serial.write() instead.