09:10
09:10 ============================================
09:10 Restart your RC & Aircraft and Enjoy New Mod
09:10 ============================================
09:10
09:10 Credit to: Ojcze Nasz, SingLag, Argonaise & www.phantompilots.com
Disconnected.
Disconnecting.
09:10 winfo
wlan0     ESSID: "PHANTOM3_0c55f6"
          Access Point: 60:60:1F:0C:55:F6
          Mode: Master  Channel: 6 (2.437 GHz)
          Tx-Power: 27 dBm  Link Quality: 70/70
          Signal: -35 dBm  Noise: -95 dBm
          Bit Rate: 97.5 MBit/s
          Encryption: WPA2 PSK (CCMP)
          Type: nl80211  HW Mode(s): 802.11abgn
          Hardware: unknown [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy0

wlan0.sta1 ESSID: unknown
          Access Point: 00:00:00:00:00:00
          Mode: Master (VLAN)  Channel: 6 (2.437 GHz)
          Tx-Power: 27 dBm  Link Quality: 70/70
          Signal: -31 dBm  Noise: -95 dBm
          Bit Rate: 130.0 MBit/s
          Encryption: none
          Type: nl80211  HW Mode(s): 802.11abgn
          Hardware: unknown [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy0

/ #
09:10 i
09:10 w dev wlan0 set txpower limit 2700
/ #
09:10



BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/ # iw reg set BO
/ # i
09:10 iwinfo
09:10 iw dev wlan0 set txpower limit 2700
09:09 iw reg set BO
Connected.
Connecting to 192.168.1.1.
Disconnected.
Disconnecting.
09:09 ==================
09:08 File upload OKE
09:08 Checking file ...
09:08 Update djiled.sh on Aircraft
09:07 File upload OKE
09:07 Checking file ...
09:07 Update djiled.sh on RC
09:06 Final process ...
09:06 mod 775 /sbin/watchlog.sh
/ #
09:06 h
09:06 c
09:06 chmod 775 /sbin/watchlog.sh
09:05 wlan0     ESSID: "PHANTOM3_0c55f6"
          Access Point: 60:60:1F:0C:55:F6
          Mode: Master  Channel: 6 (2.437 GHz)
          Tx-Power: 17 dBm  Link Quality: 70/70
          Signal: -36 dBm  Noise: -95 dBm
          Bit Rate: 65.0 MBit/s
          Encryption: WPA2 PSK (CCMP)
          Type: nl80211  HW Mode(s): 802.11abgn
          Hardware: unknown [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy0

wlan0.sta1 ESSID: unknown
          Access Point: 00:00:00:00:00:00
          Mode: Master (VLAN)  Channel: 6 (2.437 GHz)
          Tx-Power: 17 dBm  Link Quality: 70/70
          Signal: -32 dBm  Noise: -95 dBm
          Bit Rate: 65.0 MBit/s
          Encryption: none
          Type: nl80211  HW Mode(s): 802.11abgn
          Hardware: unknown [Generic MAC80211]
          TX power offset: unknown
          Frequency offset: unknown
          Supports VAPs: yes  PHY name: phy0

/ #
09:05 winfo

09:05 i
09:05 iwinfo
09:04 BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/ #
09:04 ==================
09:04 Telnet ready ...
Connected.
Connecting to 192.168.1.1.
09:04 Aircraft Ready ...
09:04 RC Ready ...
09:16
09:16 Please proceed to STEP 2
09:16
09:15 File upload OKE
09:15 Checking file ...
09:15 Upload watchlog.sh to RC
09:14 File upload OKE
09:14 Checking file ...
09:14 Configure Telnet to RC
09:13 Aircraft Ready ...
09:13 RC Ready ...
09:12 Scan Channel
09:12 Select Menu: Patch to FCC - RC Only RECOMENDED