Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- I have no other logs laying around as it is quite some time ago since I did anything on a vehicle so I made this one.
- Just a quick tie rod end change after the orignal broke.
- [2017-03-23 20:41:56] [Output] : ★ Brett Cunningham drives the vehicle in between the ramp as he steps out.
- [2017-03-23 20:42:29] [Output] : ★ Brett Cunningham reaches for the arms located on the vehicle lift, sliding the arms onto the vehicle frame.
- [2017-03-23 20:42:55] [Output] : ★ Brett Cunningham reaches for the remote as he slowly raises the ramp.
- [2017-03-23 20:43:13] [Output] : ★ Brett Cunningham walks over twards the work bench as he reaches for a tire iron.
- [2017-03-23 20:43:27] [Output] : ★ Brett Cunningham spins on his heels as he kicks his feet into motion, walking towards the left front wheel.
- [2017-03-23 20:43:45] [Output] : ★ Brett Cunningham places the tire iron on the lug nut, turning it anti clock wise.
- [2017-03-23 20:44:03] [Output] : ★ Brett Cunningham proceeds to remove the rest of the lug nuts prior to removing the wheel from its base.
- [2017-03-23 20:45:15] [Output] : ★ Brett Cunningham peeks inside as he locates the outer tie rod, walking towards the work bench.
- [2017-03-23 20:45:45] [Output] : ★ Brett Cunningham extends his right hand, reaching for a wrench as he walks back towards the vehicle.
- [2017-03-23 20:46:01] [Output] : ★ Brett Cunningham places the wrench on the pinch nut, loosen it up.
- [2017-03-23 20:46:16] [Output] : ★ Brett Cunningham twists the outer tie rod as he removes it from the inner tie rod end.
- [2017-03-23 20:46:54] [Output] : ★ Brett Cunningham reaches inside his work pants, removing a set of needle pliers.
- [2017-03-23 20:47:32] [Output] : ★ Brett Cunningham places the pliers onto the pin as he straighten it prior to removing the pin.
- [2017-03-23 20:47:59] [Output] : ★ Brett Cunningham walks towards his work bench, looking around for a ratchet, taking a firm grip onto -
- [2017-03-23 20:48:08] [Output] : ★ it as he finds it, walking back towards the left wheel base. ((Brett Cunningham))
- [2017-03-23 20:48:45] [Output] : ★ Brett Cunningham locates the castle nut where he just removed the pin, placing the ratchet onto the nut.
- [2017-03-23 20:49:12] [Output] : ★ Brett Cunningham turns the ratchet anti clock wise, loosen the nut prior to removing it.
- [2017-03-23 20:50:56] [Output] : ★ Brett Cunningham kicks his feet into motion as he walks towards the work bench, opening a drawer.
- [2017-03-23 20:51:33] [Output] : ★ Brett Cunningham reaches inside as he takes a firm grip onto a ball joint seperator, closing the drawer after
- [2017-03-23 20:54:57] [Output] : ★ Brett Cunningham walks back towards the wheelbase, placing the ball join seperator onto the outer tie rod end
- [2017-03-23 20:55:48] [Output] : ★ Brett Cunningham pry's the shaft out of the steering knuckle.
- [2017-03-23 20:56:14] [Output] : ★ Brett Cunningham twists the outer tie rod end of the spindle of the inner tie rod end, removing it as -
- [2017-03-23 20:56:20] [Output] : ★ he places it on the ground next to him. ((Brett Cunningham))
- [2017-03-23 20:57:13] [Output] : ★ Brett Cunningham walks over towards the work bench as he reaches for the new outer tie rod end -
- [2017-03-23 20:58:05] [Output] : ★ removing the plastic, sliding the cotter pin in his pants. ((Brett Cunningham))
- [2017-03-23 20:58:20] [Output] : ★ Brett Cunningham kicks his feet into motion as he walks towards the front of the vehicle again.
- [2017-03-23 20:59:07] [Output] : ★ Brett Cunningham threads the new outer tie rod end onto the inner tie rod shaft.
- [2017-03-23 20:59:30] [Output] : ★ he would use the exact same number of turns as on the one he removed. ((Brett Cunningham))
- [2017-03-23 20:59:43] [Output] : ★ Brett Cunningham shift his gaze upon the ground as he reaches for the pinch nut.
- [2017-03-23 21:00:06] [Output] : ★ Brett Cunningham places the pinch nut onto the outer tie rod end as he tightens the nut.
- [2017-03-23 21:00:25] [Output] : ★ Brett Cunningham carefully moves the knuckle and the tie rod end as he tries to align them properly.
- [2017-03-23 21:00:36] [Output] : ★ Brett Cunningham reaches down as he reaches for his ratchet and the castle nut.
- [2017-03-23 21:00:57] [Output] : ★ Brett Cunningham places the castle nut back on as he tightens it, securing the tie rond end to the steering -
- [2017-03-23 21:01:01] [Output] : ★ knuckle again. ((Brett Cunningham))
- [2017-03-23 21:01:23] [Output] : ★ Brett Cunningham slides his hand inside his pants as he removes the cotter pin, moving it towards
- [2017-03-23 21:01:40] [Output] : ★ the hole in the tie rod end shaft, sliding it in there. ((Brett Cunningham))
- [2017-03-23 21:01:50] [Output] : ★ Brett Cunningham reaches for th pliers as he places it on the pin, bending it.
- [2017-03-23 21:02:01] [Output] : ★ Brett Cunningham walks towards the workbench as he reaches for an open end wrench.
- [2017-03-23 21:02:36] [Output] : ★ Brett Cunningham quickly walks back towards the vehicle, placing the wrench onto the pinch nut as he -
- [2017-03-23 21:03:01] [Output] : ★ tightens it up against the tie rod end. ((Brett Cunningham))
- [2017-03-23 21:03:32] [Output] : ★ Brett Cunningham reaches for the left front wheel, lifing it with force as he places it back into the hub -
- [2017-03-23 21:03:50] [Output] : ★ carefully. ((Brett Cunningham))
- [2017-03-23 21:04:16] [Output] : ★ Brett Cunningham reaches for the lugs, placing them inside the wheel in a star pattern, prior to tightening -
- [2017-03-23 21:04:30] [Output] : ★ them up with his right hand. ((Brett Cunningham))
- [2017-03-23 21:04:59] [Output] : ★ Brett Cunningham reaches for the tire iron, placing them on the lugs as he tightens them up in a star pattern
- [2017-03-23 21:05:33] [Output] : ★ Brett Cunningham reaches for the wheel as he takes a firm grip onto it, attempting to pull it forward.
- [2017-03-23 21:05:44] [Output] : [English] Brett Cunningham says: Nope, that won't come off.
- [2017-03-23 21:06:23] [Output] : [English] Brett Cunningham says: That should be it, time to call Mercedes for a front end alignment.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement