Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=e83109bf-5cb2-4f38-8807-2dd447a81f62 ro quiet acpi=off noapic noacpi
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037edffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000037ee0000-0x0000000037ee2fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x0000000037ee3000-0x0000000037eeffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x0000000037ef0000-0x0000000037efffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: System manufacturer System Product Name/M2A-VM, BIOS ASUS M2A-VM ACPI BIOS Revision 1002 07/19/2007
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x37ee0 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
- [ 0.000000] 1 base 0020000000 mask FFF0000000 write-back
- [ 0.000000] 2 base 0030000000 mask FFF8000000 write-back
- [ 0.000000] 3 base 0037F00000 mask FFFFF00000 uncachable
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [mem 0x000f6510-0x000f651f] mapped at [ffff8800000f6510]
- [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
- [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
- [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x37c00000-0x37dfffff]
- [ 0.000000] [mem 0x37c00000-0x37dfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x34000000-0x37bfffff]
- [ 0.000000] [mem 0x34000000-0x37bfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x37e00000-0x37edffff]
- [ 0.000000] [mem 0x37e00000-0x37edffff] page 4k
- [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x36288000-0x3713bfff]
- [ 0.000000] Scanning NUMA topology in Northbridge 24
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037edffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x37edffff]
- [ 0.000000] NODE_DATA [mem 0x37edb000-0x37edffff]
- [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880035400000-ffff8800361fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0x37edffff]
- [ 0.000000] On node 0 totalpages: 228990
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 3077 pages used for memmap
- [ 0.000000] DMA32 zone: 224992 pages, LIFO batch:31
- [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
- [ 0.000000] Intel MultiProcessor Specification v1.4
- [ 0.000000] MPTABLE: OEM ID: OEM00000
- [ 0.000000] MPTABLE: Product ID: PROD00000000
- [ 0.000000] MPTABLE: APIC at: 0xFEE00000
- [ 0.000000] Processor #0 (Bootup-CPU)
- [ 0.000000] Processor #1
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] Processors: 2
- [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
- [ 0.000000] e820: [mem 0x37f00000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880037c00000 s80896 r8192 d21504 u1048576
- [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 225836
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=e83109bf-5cb2-4f38-8807-2dd447a81f62 ro quiet acpi=off noapic noacpi
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] AGP: Checking aperture...
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] AGP: Node 0: aperture [bus addr 0x1f60000000-0x1f61ffffff] (32MB)
- [ 0.000000] Aperture beyond 4GB. Ignoring.
- [ 0.000000] Memory: 874756K/915960K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 41204K reserved)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:33024 nr_irqs:512 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2199.724 MHz processor
- [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
- [ 0.008015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.44 BogoMIPS (lpj=8798896)
- [ 0.008019] pid_max: default: 32768 minimum: 301
- [ 0.008075] Security Framework initialized
- [ 0.008091] AppArmor: AppArmor disabled by boot time parameter
- [ 0.008093] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.008227] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.009002] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.009407] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.009412] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.009771] Initializing cgroup subsys memory
- [ 0.009780] Initializing cgroup subsys devices
- [ 0.009792] Initializing cgroup subsys freezer
- [ 0.009796] Initializing cgroup subsys net_cls
- [ 0.009803] Initializing cgroup subsys blkio
- [ 0.009810] Initializing cgroup subsys perf_event
- [ 0.009812] Initializing cgroup subsys net_prio
- [ 0.009844] tseg: 0037f00000
- [ 0.009847] CPU: Physical Processor ID: 0
- [ 0.009848] CPU: Processor Core ID: 0
- [ 0.009851] mce: CPU supports 5 MCE banks
- [ 0.009862] LVT offset 0 assigned for vector 0xf9
- [ 0.009867] process: using AMD E400 aware idle routine
- [ 0.009871] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
- Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
- tlb_flushall_shift: 6
- [ 0.009978] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
- [ 0.010926] ftrace: allocating 21679 entries in 85 pages
- [ 0.020145] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (fam: 0f, model: 6b, stepping: 02)
- [ 0.128054] Performance Events: AMD PMU driver.
- [ 0.128060] ... version: 0
- [ 0.128061] ... bit width: 48
- [ 0.128063] ... generic registers: 4
- [ 0.128064] ... value mask: 0000ffffffffffff
- [ 0.128065] ... max period: 00007fffffffffff
- [ 0.128067] ... fixed-purpose events: 0
- [ 0.128068] ... event mask: 000000000000000f
- [ 0.130172] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.130363] x86: Booting SMP configuration:
- [ 0.130366] .... node #0, CPUs: #1
- [ 0.220104] x86: Booted up 1 node, 2 CPUs
- [ 0.220107] smpboot: Total of 2 processors activated (8799.61 BogoMIPS)
- [ 0.220641] devtmpfs: initialized
- [ 0.225044] PM: Registering ACPI NVS region [mem 0x37ee0000-0x37ee2fff] (12288 bytes)
- [ 0.225657] pinctrl core: initialized pinctrl subsystem
- [ 0.225783] NET: Registered protocol family 16
- [ 0.225972] cpuidle: using governor ladder
- [ 0.225975] cpuidle: using governor menu
- [ 0.225983] node 0 link 0: io port [c000, ffff]
- [ 0.225986] TOM: 0000000040000000 aka 1024M
- [ 0.225988] node 0 link 0: mmio [a0000, bffff]
- [ 0.225991] node 0 link 0: mmio [f0000000, f7ffffff]
- [ 0.225994] node 0 link 0: mmio [40000000, dfffffff]
- [ 0.225996] node 0 link 0: mmio [f8000000, fe02ffff]
- [ 0.225998] node 0 link 0: mmio [e0000000, e03fffff]
- [ 0.226001] bus: [bus 00-03] on node 0 link 0
- [ 0.226003] bus: 00 [io 0x0000-0xffff]
- [ 0.226004] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.226006] bus: 00 [mem 0xe0400000-0xfcffffffff]
- [ 0.226007] bus: 00 [mem 0x40000000-0xe03fffff]
- [ 0.226173] PCI: Using configuration type 1 for base access
- [ 0.226318] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.226320] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.226321] mtrr: corrected configuration.
- [ 0.240101] ACPI: Interpreter disabled.
- [ 0.240143] vgaarb: loaded
- [ 0.240143] PCI: Probing PCI hardware
- [ 0.240143] PCI: root bus 00: hardware-probed resources
- [ 0.240143] PCI: Probing PCI hardware (bus 00)
- [ 0.240156] PCI host bridge to bus 0000:00
- [ 0.240161] pci_bus 0000:00: root bus resource [bus 00-03]
- [ 0.240164] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.240167] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.240170] pci_bus 0000:00: root bus resource [mem 0xe0400000-0xfcffffffff]
- [ 0.240172] pci_bus 0000:00: root bus resource [mem 0x40000000-0xe03fffff]
- [ 0.240182] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
- [ 0.240255] pci 0000:00:01.0: [1002:7912] type 01 class 0x060400
- [ 0.240332] pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
- [ 0.240362] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
- [ 0.240439] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
- [ 0.240458] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
- [ 0.240468] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
- [ 0.240479] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
- [ 0.240489] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
- [ 0.240500] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
- [ 0.240511] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
- [ 0.240533] pci 0000:00:12.0: set SATA to AHCI mode
- [ 0.240610] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
- [ 0.240625] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
- [ 0.240732] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
- [ 0.240747] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
- [ 0.240856] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
- [ 0.240871] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
- [ 0.240981] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
- [ 0.240996] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
- [ 0.241107] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
- [ 0.241122] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
- [ 0.241236] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
- [ 0.241257] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
- [ 0.241345] pci 0000:00:13.5: supports D1 D2
- [ 0.241347] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
- [ 0.241420] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.241443] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
- [ 0.241571] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
- [ 0.241585] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
- [ 0.241596] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
- [ 0.241606] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
- [ 0.241617] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
- [ 0.241627] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
- [ 0.241649] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
- [ 0.241651] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
- [ 0.241653] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
- [ 0.241656] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
- [ 0.241714] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
- [ 0.241833] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.241925] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
- [ 0.241982] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
- [ 0.242037] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
- [ 0.242091] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
- [ 0.242196] pci 0000:01:05.0: [1002:791e] type 00 class 0x030000
- [ 0.242206] pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.242212] pci 0000:01:05.0: reg 0x18: [mem 0xfdbf0000-0xfdbfffff 64bit]
- [ 0.242217] pci 0000:01:05.0: reg 0x20: [io 0xde00-0xdeff]
- [ 0.242222] pci 0000:01:05.0: reg 0x24: [mem 0xfda00000-0xfdafffff]
- [ 0.242238] pci 0000:01:05.0: supports D1 D2
- [ 0.242277] vgaarb: setting as boot device: PCI:0000:01:05.0
- [ 0.242280] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.242298] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.242302] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.242305] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff]
- [ 0.242309] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.242371] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.242384] pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
- [ 0.242409] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit]
- [ 0.242438] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 0.242501] pci 0000:02:00.0: supports D1 D2
- [ 0.242503] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.242566] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.242575] pci 0000:00:07.0: PCI bridge to [bus 02]
- [ 0.242579] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
- [ 0.242582] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.242586] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
- [ 0.242645] pci 0000:03:06.0: [1101:1622] type 00 class 0x010600
- [ 0.242669] pci 0000:03:06.0: reg 0x10: [io 0xce00-0xceff]
- [ 0.242683] pci 0000:03:06.0: reg 0x14: [io 0xcc00-0xccff]
- [ 0.242697] pci 0000:03:06.0: reg 0x18: [io 0xca00-0xcaff]
- [ 0.242711] pci 0000:03:06.0: reg 0x1c: [io 0xc800-0xc8ff]
- [ 0.242724] pci 0000:03:06.0: reg 0x20: [io 0xc600-0xc6ff]
- [ 0.242739] pci 0000:03:06.0: reg 0x24: [mem 0xfdeff000-0xfdefffff]
- [ 0.242753] pci 0000:03:06.0: reg 0x30: [mem 0xfde80000-0xfdebffff pref]
- [ 0.242793] pci 0000:03:06.0: supports D1 D2
- [ 0.242795] pci 0000:03:06.0: PME# supported from D1 D2 D3hot
- [ 0.242896] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
- [ 0.242901] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 0.242906] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
- [ 0.242911] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
- [ 0.242914] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.242917] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.242920] pci 0000:00:14.4: bridge window [mem 0xe0400000-0xfcffffffff] (subtractive decode)
- [ 0.242922] pci 0000:00:14.4: bridge window [mem 0x40000000-0xe03fffff] (subtractive decode)
- [ 0.244024] pci 0000:00:00.0: default IRQ router [1002:7910]
- [ 0.244056] PCI: pci_cache_line_size set to 64 bytes
- [ 0.244105] Expanded resource reserved due to conflict with PCI Bus #00
- [ 0.244106] Expanded resource reserved due to conflict with PCI Bus #00
- [ 0.244109] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
- [ 0.244112] e820: reserve RAM buffer [mem 0x37ee0000-0x37ffffff]
- [ 0.244358] Switched to clocksource refined-jiffies
- [ 0.252846] pnp: PnP ACPI: disabled
- [ 0.252894] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.252894] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.252894] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdbfffff]
- [ 0.252894] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.252894] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
- [ 0.252894] pci 0000:00:07.0: PCI bridge to [bus 02]
- [ 0.252894] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
- [ 0.252894] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 0.252894] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
- [ 0.252894] pci 0000:00:14.4: PCI bridge to [bus 03]
- [ 0.252894] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 0.252894] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
- [ 0.252894] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
- [ 0.252894] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.252894] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.252894] pci_bus 0000:00: resource 6 [mem 0xe0400000-0xfcffffffff]
- [ 0.252894] pci_bus 0000:00: resource 7 [mem 0x40000000-0xe03fffff]
- [ 0.252894] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.252894] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff]
- [ 0.252894] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
- [ 0.252894] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.252894] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
- [ 0.252894] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
- [ 0.252894] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- [ 0.252894] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
- [ 0.252894] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
- [ 0.252894] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
- [ 0.252894] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.252894] pci_bus 0000:03: resource 6 [mem 0xe0400000-0xfcffffffff]
- [ 0.252894] pci_bus 0000:03: resource 7 [mem 0x40000000-0xe03fffff]
- [ 0.252894] NET: Registered protocol family 2
- [ 0.252894] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.252894] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
- [ 0.256070] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.256158] TCP: reno registered
- [ 0.256163] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.256177] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.256274] NET: Registered protocol family 1
- [ 0.412075] pci 0000:01:05.0: Video device with shadowed ROM
- [ 0.412084] PCI: CLS 32 bytes, default 64
- [ 0.412167] Unpacking initramfs...
- [ 0.787517] Freeing initrd memory: 15056K (ffff880036288000 - ffff88003713c000)
- [ 0.787910] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 0.788008] microcode: AMD CPU family 0xf not supported
- [ 0.788246] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.788295] audit: initializing netlink subsys (disabled)
- [ 0.788332] audit: type=2000 audit(1458714213.788:1): initialized
- [ 0.788614] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.788614] zbud: loaded
- [ 0.788614] VFS: Disk quotas dquot_6.5.2
- [ 0.788614] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.788614] msgmni has been set to 1737
- [ 0.788614] alg: No test for stdrng (krng)
- [ 0.788614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.788614] io scheduler noop registered
- [ 0.788614] io scheduler deadline registered
- [ 0.788614] io scheduler cfq registered (default)
- [ 0.788614] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X
- [ 0.788614] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
- [ 0.788614] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
- [ 0.788614] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
- [ 0.788614] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.788614] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.788614] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.788614] Linux agpgart interface v0.103
- [ 0.788614] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.788614] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.788614] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.788638] mousedev: PS/2 mouse device common for all mice
- [ 0.788638] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
- [ 0.788638] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
- [ 0.788638] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.792142] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
- [ 0.792144] AMD IOMMUv2 functionality not available on this system
- [ 0.792267] TCP: cubic registered
- [ 0.792307] NET: Registered protocol family 10
- [ 0.792514] mip6: Mobile IPv6
- [ 0.792514] NET: Registered protocol family 17
- [ 0.792514] mpls_gso: MPLS GSO support
- [ 0.792514] registered taskstats version 1
- [ 0.792514] rtc_cmos rtc_cmos: setting system clock to 2016-03-23 06:23:34 UTC (1458714214)
- [ 0.792514] PM: Hibernation image not present or could not be loaded.
- [ 0.793856] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
- [ 0.793860] Write protecting the kernel read-only data: 8192k
- [ 0.794714] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
- [ 0.796783] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
- [ 0.809082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 0.813438] systemd-udevd[60]: starting version 215
- [ 0.813438] random: systemd-udevd urandom read with 2 bits of entropy available
- [ 0.831503] usbcore: registered new interface driver usbfs
- [ 0.831523] usbcore: registered new interface driver hub
- [ 0.834360] SCSI subsystem initialized
- [ 0.836231] usbcore: registered new device driver usb
- [ 0.836726] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.836923] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
- [ 0.837037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.837178] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc900001d2000, 00:1d:60:2a:ce:e7, XID 18000000 IRQ 41
- [ 0.837182] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
- [ 0.837474] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.837723] ehci-pci: EHCI PCI platform driver
- [ 0.837801] ehci-pci 0000:00:13.5: EHCI Host Controller
- [ 0.837810] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
- [ 0.837819] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
- [ 0.837834] ehci-pci 0000:00:13.5: debug port 1
- [ 0.837878] ehci-pci 0000:00:13.5: irq 5, io mem 0xfe029000
- [ 0.839021] libata version 3.00 loaded.
- [ 0.848066] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
- [ 0.848147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.848150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.848152] usb usb1: Product: EHCI Host Controller
- [ 0.848155] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
- [ 0.848157] usb usb1: SerialNumber: 0000:00:13.5
- [ 0.848350] hub 1-0:1.0: USB hub found
- [ 0.848361] hub 1-0:1.0: 10 ports detected
- [ 0.849046] ohci-pci: OHCI PCI platform driver
- [ 0.857104] scsi0 : pata_atiixp
- [ 0.857394] scsi1 : pata_atiixp
- [ 0.857394] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
- [ 0.857394] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
- [ 0.857602] ahci 0000:00:12.0: version 3.0
- [ 0.857602] ahci 0000:00:12.0: ASUS M2A-VM: BIOS too old, forcing 32bit DMA, update BIOS
- [ 0.857602] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
- [ 0.857602] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- [ 0.857602] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
- [ 0.858724] scsi2 : ahci
- [ 0.858724] scsi3 : ahci
- [ 0.858805] scsi4 : ahci
- [ 0.858805] scsi5 : ahci
- [ 0.858805] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 11
- [ 0.858805] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 11
- [ 0.858805] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 11
- [ 0.858805] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 11
- [ 0.858805] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 0.860055] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
- [ 0.860102] ohci-pci 0000:00:13.0: irq 4, io mem 0xfe02e000
- [ 0.920117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.920120] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.920122] usb usb2: Product: OHCI PCI host controller
- [ 0.920124] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
- [ 0.920127] usb usb2: SerialNumber: 0000:00:13.0
- [ 0.920171] hub 2-0:1.0: USB hub found
- [ 0.920182] hub 2-0:1.0: 2 ports detected
- [ 0.920338] ohci-pci 0000:00:13.1: OHCI PCI host controller
- [ 0.920345] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
- [ 0.920374] ohci-pci 0000:00:13.1: irq 3, io mem 0xfe02d000
- [ 0.980100] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.980103] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.980105] usb usb3: Product: OHCI PCI host controller
- [ 0.980107] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
- [ 0.980109] usb usb3: SerialNumber: 0000:00:13.1
- [ 0.980152] hub 3-0:1.0: USB hub found
- [ 0.980162] hub 3-0:1.0: 2 ports detected
- [ 0.980287] ohci-pci 0000:00:13.2: OHCI PCI host controller
- [ 0.980293] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
- [ 0.980315] ohci-pci 0000:00:13.2: irq 7, io mem 0xfe02c000
- [ 1.040106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.040109] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.040111] usb usb4: Product: OHCI PCI host controller
- [ 1.040113] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
- [ 1.040116] usb usb4: SerialNumber: 0000:00:13.2
- [ 1.040152] hub 4-0:1.0: USB hub found
- [ 1.040164] hub 4-0:1.0: 2 ports detected
- [ 1.040288] ohci-pci 0000:00:13.3: OHCI PCI host controller
- [ 1.040295] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
- [ 1.040317] ohci-pci 0000:00:13.3: irq 3, io mem 0xfe02b000
- [ 1.100116] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.100118] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.100120] usb usb5: Product: OHCI PCI host controller
- [ 1.100123] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
- [ 1.100125] usb usb5: SerialNumber: 0000:00:13.3
- [ 1.100154] hub 5-0:1.0: USB hub found
- [ 1.100165] hub 5-0:1.0: 2 ports detected
- [ 1.100287] ohci-pci 0000:00:13.4: OHCI PCI host controller
- [ 1.100293] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
- [ 1.100312] ohci-pci 0000:00:13.4: irq 7, io mem 0xfe02a000
- [ 1.160119] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.160122] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.160124] usb usb6: Product: OHCI PCI host controller
- [ 1.160126] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
- [ 1.160128] usb usb6: SerialNumber: 0000:00:13.4
- [ 1.160157] hub 6-0:1.0: USB hub found
- [ 1.160167] hub 6-0:1.0: 2 ports detected
- [ 1.352081] ata3: softreset failed (device not ready)
- [ 1.352121] ata3: applying PMP SRST workaround and retrying
- [ 1.352108] ata5: softreset failed (device not ready)
- [ 1.352147] ata5: applying PMP SRST workaround and retrying
- [ 1.352164] ata4: softreset failed (device not ready)
- [ 1.352197] ata4: applying PMP SRST workaround and retrying
- [ 1.352213] ata6: softreset failed (device not ready)
- [ 1.352246] ata6: applying PMP SRST workaround and retrying
- [ 1.524100] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.524098] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.524123] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.524142] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.524114] ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01106, max UDMA7
- [ 1.524114] ata3.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 1.524114] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.524114] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.524114] ata3.00: configured for UDMA/133
- [ 1.524191] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1106 PQ: 0 ANSI: 5
- [ 1.524246] ata6.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
- [ 1.524246] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 1.524246] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.524246] ata5.00: ATA-8: WDC WD15EADS-00R6B0, 01.00A01, max UDMA/133
- [ 1.524246] ata5.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 1.524246] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.528097] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.528097] ata6.00: configured for UDMA/133
- [ 1.528103] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.528103] ata5.00: configured for UDMA/133
- [ 1.528103] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7
- [ 1.528103] ata4.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 1.528103] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.536098] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
- [ 1.536098] ata4.00: configured for UDMA/133
- [ 1.536129] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1109 PQ: 0 ANSI: 5
- [ 1.536197] scsi 4:0:0:0: Direct-Access ATA WDC WD15EADS-00R 0A01 PQ: 0 ANSI: 5
- [ 1.536197] scsi 5:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
- [ 1.544252] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 1.544269] sd 4:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 1.544299] sd 3:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 1.544364] sd 4:0:0:0: [sdc] Write Protect is off
- [ 1.544367] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.544388] sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 1.544409] sd 5:0:0:0: [sdd] Write Protect is off
- [ 1.544412] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 1.544442] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.544559] sd 3:0:0:0: [sdb] Write Protect is off
- [ 1.544562] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.544595] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.544650] sd 2:0:0:0: [sda] Write Protect is off
- [ 1.544653] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.544673] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.544736] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.545069] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 1.545114] sd 3:0:0:0: Attached scsi generic sg1 type 0
- [ 1.545154] sd 4:0:0:0: Attached scsi generic sg2 type 0
- [ 1.545195] sd 5:0:0:0: Attached scsi generic sg3 type 0
- [ 1.546909] sdb: sdb1
- [ 1.546909] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 1.553069] sdd: sdd1
- [ 1.553069] sd 5:0:0:0: [sdd] Attached SCSI disk
- [ 1.580177] sda: sda1 sda2 sda3 < sda5 >
- [ 1.580955] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 1.612135] sdc: sdc3
- [ 1.612292] sd 4:0:0:0: [sdc] Attached SCSI disk
- [ 1.880412] PM: Starting manual resume from disk
- [ 1.880422] PM: Hibernation image partition 8:1 present
- [ 1.880423] PM: Looking for hibernation image.
- [ 1.880500] PM: Image not found (code -22)
- [ 1.880500] PM: Hibernation image not present or could not be loaded.
- [ 2.613195] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.656174] random: nonblocking pool is initialized
- [ 3.668934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 4.120389] systemd-udevd[169]: starting version 215
- [ 4.864635] ACPI Exception: AE_BAD_PARAMETER, Thread 826412320 could not acquire Mutex [0x1] (20140424/utmutex-285)
- [ 4.864654] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- [ 4.864703] ACPI Exception: AE_BAD_PARAMETER, Thread 826412320 could not acquire Mutex [0x1] (20140424/utmutex-285)
- [ 4.864708] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
- [ 4.967284] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
- [ 4.988632] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 4.993136] EDAC MC: Ver: 3.0.0
- [ 5.000832] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 5.012560] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
- [ 5.012636] sp5100_tco: PCI Revision ID: 0x14
- [ 5.012662] sp5100_tco: Using 0xfec000f0 for watchdog MMIO address
- [ 5.012675] sp5100_tco: Last reboot was not triggered by watchdog.
- [ 5.012753] sp5100_tco: initialized (0xffffc900001d60f0). heartbeat=60 sec (nowayout=0)
- [ 5.040577] input: PC Speaker as /devices/platform/pcspkr/input/input2
- [ 5.112097] MCE: In-kernel MCE decoding enabled.
- [ 5.153390] AMD64 EDAC driver v3.4.0
- [ 5.153390] EDAC amd64: DRAM ECC disabled.
- [ 5.153390] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 5.241339] systemd-journald[166]: Received request to flush runtime journal from PID 1
- [ 5.304914] [drm] Initialized drm 1.1.0 20060810
- [ 5.333459] kvm: Nested Virtualization enabled
- [ 5.498127] [drm] radeon kernel modesetting enabled.
- [ 5.498347] [drm] initializing kernel modesetting (RS690 0x1002:0x791E 0x1043:0x826D).
- [ 5.498347] [drm] register mmio base: 0xFDBF0000
- [ 5.498347] [drm] register mmio size: 65536
- [ 5.498347] ATOM BIOS: ATI
- [ 5.498347] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
- [ 5.498347] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
- [ 5.498347] [drm] Detected VRAM RAM=128M, BAR=128M
- [ 5.498347] [drm] RAM width 128bits DDR
- [ 5.498347] [TTM] Zone kernel: Available graphics memory: 446080 kiB
- [ 5.498347] [TTM] Initializing pool allocator
- [ 5.498347] [TTM] Initializing DMA pool allocator
- [ 5.498347] [drm] radeon: 128M of VRAM memory ready
- [ 5.498347] [drm] radeon: 512M of GTT memory ready.
- [ 5.498347] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 5.516975] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
- [ 5.524383] [drm] PCIE GART of 512M enabled (table at 0x0000000034A80000).
- [ 5.524423] radeon 0000:01:05.0: WB enabled
- [ 5.524428] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xffff880031ab9000
- [ 5.524431] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 5.524432] [drm] Driver supports precise vblank timestamp query.
- [ 5.524434] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
- [ 5.524456] radeon 0000:01:05.0: irq 42 for MSI/MSI-X
- [ 5.524471] radeon 0000:01:05.0: radeon: using MSI.
- [ 5.524490] [drm] radeon: irq initialized.
- [ 5.524510] [drm] Loading RS690/RS740 Microcode
- [ 5.596364] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS690_cp.bin
- [ 5.596500] [drm] radeon: ring at 0x0000000040001000
- [ 5.596520] [drm] ring test succeeded in 1 usecs
- [ 5.596645] [drm] ib test succeeded in 0 usecs
- [ 5.596874] [drm] Radeon Display Connectors
- [ 5.596874] [drm] Connector 0:
- [ 5.596874] [drm] VGA-1
- [ 5.596874] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
- [ 5.596874] [drm] Encoders:
- [ 5.596874] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 5.596874] [drm] Connector 1:
- [ 5.596874] [drm] SVIDEO-1
- [ 5.596874] [drm] Encoders:
- [ 5.596874] [drm] TV1: INTERNAL_KLDSCP_DAC1
- [ 5.596874] [drm] Connector 2:
- [ 5.596874] [drm] HDMI-A-1
- [ 5.596874] [drm] HPD2
- [ 5.596874] [drm] DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c
- [ 5.596874] [drm] Encoders:
- [ 5.596874] [drm] DFP2: INTERNAL_DDI
- [ 5.596874] [drm] Connector 3:
- [ 5.596874] [drm] DVI-D-1
- [ 5.596874] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
- [ 5.596874] [drm] Encoders:
- [ 5.596874] [drm] DFP3: INTERNAL_LVTM1
- [ 5.725812] [drm] fb mappable at 0xF0040000
- [ 5.725818] [drm] vram apper at 0xF0000000
- [ 5.725819] [drm] size 3145728
- [ 5.725821] [drm] fb depth is 24
- [ 5.725822] [drm] pitch is 4096
- [ 5.725854] fbcon: radeondrmfb (fb0) is primary device
- [ 5.748179] Console: switching to colour frame buffer device 128x48
- [ 5.754839] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
- [ 5.754842] radeon 0000:01:05.0: registered panic notifier
- [ 5.764387] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:05.0 on minor 0
- [ 5.852771] powernow_k8: [Firmware Bug]: No compatible ACPI _PSS objects found.
- [Firmware Bug]: First, make sure Cool'N'Quiet is enabled in the BIOS.
- [Firmware Bug]: If that doesn't help, try upgrading your BIOS.
- [ 5.869134] powernow_k8: [Firmware Bug]: No compatible ACPI _PSS objects found.
- [Firmware Bug]: First, make sure Cool'N'Quiet is enabled in the BIOS.
- [Firmware Bug]: If that doesn't help, try upgrading your BIOS.
- [ 5.904783] Adding 1951740k swap on /dev/sda1. Priority:-1 extents:1 across:1951740k FS
- [ 6.077643] r8169 0000:02:00.0 eth0: link down
- [ 6.077687] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 6.077928] r8169 0000:02:00.0 eth0: link down
- [ 6.513752] RPC: Registered named UNIX socket transport module.
- [ 6.513760] RPC: Registered udp transport module.
- [ 6.513762] RPC: Registered tcp transport module.
- [ 6.513763] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 6.529354] FS-Cache: Loaded
- [ 6.554682] FS-Cache: Netfs 'nfs' registered for caching
- [ 6.578289] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 8.652549] r8169 0000:02:00.0 eth0: link up
- [ 8.652565] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Add Comment
Please, Sign In to add comment