API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 2nd, 2016
115
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.70 KB | None | 0 0
raw download clone embed print report
  1. Starting kernel ...
  2.  
  3. [ 0.000000] Booting Linux on physical CPU 0x0
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Initializing cgroup subsys cpuacct
  6. [ 0.000000] Linux version 4.4.0 (franklin@beast-server) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 SMP PREEMPT Tue Feb 2 09:28:57 CST 2016
  7. [ 0.000000] CPU: ARMv7 Processor [412fc0f4] revision 4 (ARMv7), cr=30c5387d
  8. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  9. [ 0.000000] Machine model: Texas Instruments Keystone 2 Kepler/Hawking EVM
  10. [ 0.000000] Switching physical address space to 0x800000000
  11. [ 0.000000] cma: Reserved 16 MiB at 0x000000085f000000
  12. [ 0.000000] Forcing write-allocate cache policy for SMP
  13. [ 0.000000] Memory policy: Data cache writealloc
  14. [ 0.000000] PERCPU: Embedded 13 pages/cpu @ef3a7000 s21248 r8192 d23808 u53248
  15. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 391680
  16. [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootwait=1 rootfstype=nfs root=/dev/nfs rw nfsroot=192.168.1.219:/home/franklin/nfs/k2hk/,v3,tcp,rsize=4096,wsize=4096 ip=dhcp
  17. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  18. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  19. [ 0.000000] log_buf_len min size: 16384 bytes
  20. [ 0.000000] log_buf_len: 32768 bytes
  21. [ 0.000000] early log buf free: 14516(88%)
  22. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Memory: 1534504K/1572864K available (5611K kernel code, 359K rwdata, 1920K rodata, 364K init, 199K bss, 21976K reserved, 16384K cma-reserved, 770048K highmem)
  26. [ 0.000000] Virtual kernel memory layout:
  27. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  29. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  30. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  31. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  32. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  33. [ 0.000000] .text : 0xc0008000 - 0xc0762f48 (7532 kB)
  34. [ 0.000000] .init : 0xc0763000 - 0xc07be000 ( 364 kB)
  35. [ 0.000000] .data : 0xc07be000 - 0xc0817c14 ( 360 kB)
  36. [ 0.000000] .bss : 0xc081a000 - 0xc084bc70 ( 200 kB)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Preemptible hierarchical RCU implementation.
  39. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  40. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [ 0.000000] Architected cp15 timer(s) running at 200.00MHz (virt).
  42. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
  43. [ 0.000003] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
  44. [ 0.000010] Switching to timer-based delay loop, resolution 5ns
  45. [ 0.000143] keystone timer clock @200000000 Hz
  46. [ 0.000252] Console: colour dummy device 80x30
  47. [ 0.000268] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
  48. [ 0.000277] pid_max: default: 4096 minimum: 301
  49. [ 0.000331] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  50. [ 0.000337] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  51. [ 0.000715] Initializing cgroup subsys io
  52. [ 0.000728] Initializing cgroup subsys devices
  53. [ 0.000738] Initializing cgroup subsys freezer
  54. [ 0.000752] CPU: Testing write buffer coherency: ok
  55. [ 0.000913] /cpus/cpu@0 missing clock-frequency property
  56. [ 0.000928] /cpus/cpu@1 missing clock-frequency property
  57. [ 0.000942] /cpus/cpu@2 missing clock-frequency property
  58. [ 0.000957] /cpus/cpu@3 missing clock-frequency property
  59. [ 0.000964] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  60. [ 0.000991] Setting up static identity map for 0x800082c0 - 0x800083cc
  61. [ 0.084430] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  62. [ 0.114467] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  63. [ 0.144501] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  64. [ 0.144571] Brought up 4 CPUs
  65. [ 0.144584] SMP: Total of 4 processors activated (1600.00 BogoMIPS).
  66. [ 0.144589] CPU: All CPU(s) started in SVC mode.
  67. [ 0.144899] devtmpfs: initialized
  68. [ 0.149948] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  69. [ 0.150248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  70. [ 0.150724] NET: Registered protocol family 16
  71. [ 0.151401] DMA: preallocated 256 KiB pool for atomic coherent allocations
  72. [ 0.157631] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  73. [ 0.157638] hw-breakpoint: maximum watchpoint size is 8 bytes.
  74. [ 0.166181] vgaarb: loaded
  75. [ 0.166431] SCSI subsystem initialized
  76. [ 0.166780] usbcore: registered new interface driver usbfs
  77. [ 0.166860] usbcore: registered new interface driver hub
  78. [ 0.166950] usbcore: registered new device driver usb
  79. [ 0.168558] clocksource: Switched to clocksource arch_sys_counter
  80. [ 0.194347] NET: Registered protocol family 2
  81. [ 0.194739] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  82. [ 0.194790] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  83. [ 0.194883] TCP: Hash tables configured (established 8192 bind 8192)
  84. [ 0.194917] UDP hash table entries: 512 (order: 2, 16384 bytes)
  85. [ 0.194940] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  86. [ 0.195057] NET: Registered protocol family 1
  87. [ 0.195210] RPC: Registered named UNIX socket transport module.
  88. [ 0.195215] RPC: Registered udp transport module.
  89. [ 0.195220] RPC: Registered tcp transport module.
  90. [ 0.195224] RPC: Registered tcp NFSv4.1 backchannel transport module.
  91. [ 0.195350] Unpacking initramfs...
  92. [ 0.195739] Freeing initrd memory: 4K (cffff000 - d0000000)
  93. [ 0.195849] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  94. [ 0.196373] platform alarmtimer: set dma_pfn_offset00780000
  95. [ 0.196946] futex hash table entries: 16 (order: -2, 1024 bytes)
  96. [ 0.207469] Installing knfsd (copyright (C) 1996 [email protected]).
  97. [ 0.207554] ntfs: driver 2.1.32 [Flags: R/O].
  98. [ 0.207848] jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  99. [ 0.210315] NET: Registered protocol family 38
  100. [ 0.210372] bounce: pool size: 64 pages
  101. [ 0.210566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  102. [ 0.210576] io scheduler noop registered
  103. [ 0.210584] io scheduler deadline registered
  104. [ 0.210605] io scheduler cfq registered (default)
  105. [ 0.210715] keystone_irq soc:keystone_irq@26202a0: irqchip registered, nr_irqs 28
  106. [ 0.212185] keystone-navigator-qmss soc:qmss@2a40000: qmgr start queue 0, number of queues 8192
  107. [ 0.212288] keystone-navigator-qmss soc:qmss@2a40000: added qmgr start queue 0, num of queues 8192, reg_peek f09c0000, reg_status f09e2000, reg_config f09e4000, reg_region f09e6000, reg_push f0a00000, reg_pop f0a40000
  108. [ 0.212298] keystone-navigator-qmss soc:qmss@2a40000: qmgr start queue 8192, number of queues 8192
  109. [ 0.212384] keystone-navigator-qmss soc:qmss@2a40000: added qmgr start queue 8192, num of queues 8192, reg_peek f0a80000, reg_status f09e8400, reg_config f09ea000, reg_region f09ec000, reg_push f0ac0000, reg_pop f0b00000
  110. [ 0.212504] keystone-navigator-qmss soc:qmss@2a40000: firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP
  111. [ 0.213863] keystone-navigator-dma soc:knav_dmas@0: DMA dma_gbe registered 41 logical channels, flows 32, tx chans: 9, rx chans: 24
  112. [ 0.269543] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  113. [ 0.269611] platform serial8250: set dma_pfn_offset00780000
  114. [ 0.271005] console [ttyS0] disabled
  115. [ 0.271043] 2530c00.serial: ttyS0 at MMIO 0x2530c00 (irq = 26, base_baud = 12500000) is a 16550A
  116. [ 0.991758] console [ttyS0] enabled
  117. [ 0.995874] 2531000.serial: ttyS1 at MMIO 0x2531000 (irq = 27, base_baud = 12500000) is a 16550A
  118. [ 1.009481] loop: module loaded
  119. [ 1.012773] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write
  120. [ 1.021275] m25p80 spi32766.0: n25q128a11 (16384 Kbytes)
  121. [ 1.026618] 2 ofpart partitions found on MTD device spi32766.0
  122. [ 1.032484] Creating 2 MTD partitions on "spi32766.0":
  123. [ 1.037639] 0x000000000000-0x000000080000 : "u-boot-spl"
  124. [ 1.043773] 0x000000080000-0x000001000000 : "misc"
  125. [ 1.049426] spi_davinci 21000400.spi: Controller at 0xf0a2c400
  126. [ 1.055702] spi_davinci 21000600.spi: Controller at 0xf0a2e600
  127. [ 1.061992] spi_davinci 21000800.spi: Controller at 0xf0a30800
  128. [ 1.118570] davinci_mdio 2090300.mdio: davinci mdio revision 1.5
  129. [ 1.124596] libphy: 2090300.mdio: probed
  130. [ 1.129104] davinci_mdio 2090300.mdio: phy[0]: device 2090300.mdio:00, driver Marvell 88E1111
  131. [ 1.137660] davinci_mdio 2090300.mdio: phy[1]: device 2090300.mdio:01, driver Marvell 88E1111
  132. [ 2.151493] netcp-1.0 2620110.netcp: module(netcp-xgbe) not used for device
  133. [ 2.359553] platform xhci-hcd.0.auto: set dma_pfn_offset00780000
  134. [ 2.366087] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  135. [ 2.371758] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  136. [ 2.379670] xhci-hcd xhci-hcd.0.auto: hcc params 0x0298f06d hci version 0x100 quirks 0x00010010
  137. [ 2.388408] xhci-hcd xhci-hcd.0.auto: irq 34, io mem 0x02690000
  138. [ 2.394479] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  139. [ 2.401306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  140. [ 2.408569] usb usb1: Product: xHCI Host Controller
  141. [ 2.413460] usb usb1: Manufacturer: Linux 4.4.0 xhci-hcd
  142. [ 2.418800] usb usb1: SerialNumber: xhci-hcd.0.auto
  143. [ 2.424102] hub 1-0:1.0: USB hub found
  144. [ 2.427886] hub 1-0:1.0: 1 port detected
  145. [ 2.432069] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  146. [ 2.437710] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  147. [ 2.445464] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  148. [ 2.453676] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  149. [ 2.460502] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  150. [ 2.467748] usb usb2: Product: xHCI Host Controller
  151. [ 2.472649] usb usb2: Manufacturer: Linux 4.4.0 xhci-hcd
  152. [ 2.477977] usb usb2: SerialNumber: xhci-hcd.0.auto
  153. [ 2.483283] hub 2-0:1.0: USB hub found
  154. [ 2.487059] hub 2-0:1.0: 1 port detected
  155. [ 2.491390] usbcore: registered new interface driver usb-storage
  156. [ 2.497683] mousedev: PS/2 mouse device common for all mice
  157. [ 2.503513] i2c /dev entries driver
  158. [ 2.507624] davinci-wdt 22f0080.wdt: heartbeat 60 sec
  159. [ 2.513797] usbcore: registered new interface driver usbhid
  160. [ 2.519400] usbhid: USB HID core driver
  161. [ 2.523958] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xac
  162. [ 2.530419] nand: Micron MT29F4G08ABBDAHC
  163. [ 2.534440] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  164. [ 2.542346] Bad block table found at page 262080, version 0x01
  165. [ 2.548736] Bad block table found at page 262016, version 0x01
  166. [ 2.554907] 3 ofpart partitions found on MTD device MT29F4G08ABBDAHC
  167. [ 2.561291] Creating 3 MTD partitions on "MT29F4G08ABBDAHC":
  168. [ 2.566968] 0x000000000000-0x000000100000 : "u-boot"
  169. [ 2.572741] 0x000000100000-0x000000180000 : "params"
  170. [ 2.578493] 0x000000180000-0x000020000000 : "ubifs"
  171. [ 2.584381] davinci_nand 30000000.nand: controller rev. 2.5
  172. [ 2.590275] platform oprofile-perf.0: set dma_pfn_offset00780000
  173. [ 2.596498] oprofile: using timer interrupt.
  174. [ 2.600837] Netfilter messages via NETLINK v0.30.
  175. [ 2.605571] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  176. [ 2.612120] ctnetlink v0.93: registering with nfnetlink.
  177. [ 2.617751] ipip: IPv4 over IPv4 tunneling driver
  178. [ 2.622897] gre: GRE over IPv4 demultiplexor driver
  179. [ 2.627795] ip_gre: GRE over IPv4 tunneling driver
  180. [ 2.633565] ip_tables: (C) 2000-2006 Netfilter Core Team
  181. [ 2.638984] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  182. [ 2.645383] arp_tables: (C) 2002 David S. Miller
  183. [ 2.650109] Initializing XFRM netlink socket
  184. [ 2.655227] NET: Registered protocol family 10
  185. [ 2.660398] NET: Registered protocol family 17
  186. [ 2.664867] NET: Registered protocol family 15
  187. [ 2.669344] 8021q: 802.1Q VLAN Support v1.8
  188. [ 2.675065] sctp: Hash tables configured (established 65536 bind 65536)
  189. [ 2.682004] Registering SWP/SWPB emulation handler
  190. [ 2.779225] netcp-1.0 2620110.netcp eth0: Link is Down
  191. [ 2.786122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  192. [ 2.791992] 8021q: adding VLAN 0 to HW filter on device eth0
  193. [ 2.879243] netcp-1.0 2620110.netcp eth1: Link is Down
  194. [ 2.885130] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  195. [ 2.890993] 8021q: adding VLAN 0 to HW filter on device eth1
  196. [ 2.896711] IP-Config: Failed to open gretap0
  197. [ 2.918567] Sending DHCP requests ..
  198. [ 6.778923] netcp-1.0 2620110.netcp eth0: Link is Up - 1Gbps/Full - flow control off
  199. [ 6.786874] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  200. [ 7.405014] DHCP/BOOTP: Reply not for us, op[2] xid[19970112]
  201. [ 11.158565] ., OK
  202. [ 11.208569] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.201
  203. [ 11.389275] IP-Config: Complete:
  204. [ 11.392512] device=eth0, hwaddr=b4:99:4c:b7:fc:b1, ipaddr=192.168.1.201, mask=255.255.255.0, gw=192.168.1.1
  205. [ 11.402742] host=192.168.1.201, domain=, nis-domain=(none)
  206. [ 11.408691] bootserver=192.168.1.1, rootserver=192.168.1.219, rootpath=
  207. [ 11.415586] nameserver0=8.8.8.8, nameserver1=192.168.1.1
  208. [ 11.437591] VFS: Mounted root (nfs filesystem) on device 0:15.
  209. [ 11.443840] devtmpfs: mounted
  210. [ 11.446989] Freeing unused kernel memory: 364K (c0763000 - c07be000)
  211. INIT: version 2.88 booting
  212. Error opening /dev/fb0: No such file or directory
  213. Starting udev
  214. [ 11.772930] udevd[1209]: starting version 182
  215. [ 12.441139] random: dd urandom read with 102 bits of entropy available
  216. Populating dev cache
  217. [ 12.805509] random: nonblocking pool is initialized
  218. Sun Jan 24 06:52:09 UTC 2016
  219. INIT: Entering runlevel: 5
  220. NOT configuring network interfaces: / is an NFS mount
  221. Starting system message bus: dbus.
  222. Starting telnet daemon.
  223. Starting rpcbind daemon...done.
  224. starting statd: done
  225. Starting syslogd/klogd: done
  226. Starting thttpd.
  227. Enabling thermal zones...
  228. /etc/rc5.d/S98thermal-zone-init: line 7: /sys/class/thermal/thermal_zone*/mode: No such file or directory
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!