Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.04.10 17:03:05 =~=~=~=~=~=~=~=~=~=~=~=
- ALIZE Start
- 1Mo RAM OK
- memory test started lng=66060288 with 0
- running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3ff80000
- DIMM characteristics->: JEDEC Manu ID:.,яяяяяя
- Memory type(EDO,FPM..):0x04
- # of row address:12
- # of col address 9
- # of module row 1
- PCI: Using configuration type 1
- PCI: Probing PCI hardware
- PCI:scan_bus for bus 0
- PCI:bus=00h,devfn=00h ,[vendor:device]=[1022h/3000h]
- PCI:bus=00h,devfn=60h ,[vendor:device]=[100bh/0020h]
- PCI:bus=00h,devfn=98h ,[vendor:device]=[1064h/2101h]
- PCI:scan_buses with 00h secondary buses
- PCI:command =000003ffH for device 00:00
- PCI: Assigning I/O space fc00-fcff for 00:60 BAR=00000010
- PCI:Assign memory space bffff000H to bfffffffH for device 00:60
- PCI:command =000003ffH for device 00:60
- PCI:Assign memory space bfffd000H to bfffdfffH for device 00:98
- PCI: Assigning I/O space fd00-fd1f for 00:98 BAR=00000014
- PCI: Unable to handle I/O allocation for 00:98 (ff04) BAR=00000018
- PCI:command =000003ffH for device 00:98
- assigning irq10 to xchange
- B0 = 17
- DRCTMCTL = 1e
- DRCCTL = 18
- DBCTL = 11
- Set external RTC
- Set Internal RTC
- No external RTC detected
- gpbus sig timing : 0-2-1-2-1-2!
- CMOS is available
- Xchange PCI mem base OK: 00000000
- Xchange PCI IO base OK: 00000000
- Xchange irq OK: 0a
- PCI command read for natsemi : 00000347
- PCI Master Bit Setting...
- pci_command set to:0357
- 0000 0080 009f 0036 008b 0042 , IRQ 12.
- eth0: Transceiver status 0x00007869 advertising 000005e1
- Hard Disk #0 : TOSHIBA MK3021GAS 28615 Mo
- Parameters :
- Type 00000
- Extended Type 00255
- Sectors / track 00063
- Landing Zone 00000
- Control Byte 00000
- Write Precomp 00000
- Heads 00016
- Nb of Cylinders 16383
- HD size(cyl*sec by track*head*sector size) 08455 MO(decimal)
- init nand set interupt
- Flashfx version:520.001.001
- NAND flash drive No. 0 successfully mounted
- NAND Flash Comfiguration:
- CPU size : 64 MBytes
- free spare blocks: 71
- XMEM size : 0 MBytes
- NAND Flash Details:
- chip #0 : Type= Id=9876H Size=64(MBytes) Unit size=16384 Page Size=512
- time :sec=50,min=59,hour=12,DoW=06,date=10,Month=04,year=12
- time :sec=54,min=59,hour=12,DoW=06,date=10,Month=04,year=12
- ALIZE informations :
- Memory Detected : 65536 Ko
- Flash Detected
- DaughterBoard Detected
- DSP Voip Found : 4
- XCHANGE Detected
- XCHANGE Chip Initialization OK
- Ethernet Found : 1
- Ethernet Chip Initialization OK
- Hard Disk Detected
- Hard Disk Found : 1
- PCM11 selected
- No HD trace
- CPU at 133 mhz
- check lock RTC
- value of DIL switch 0f
- YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !
- test the BATMODE
- wait for shutdown reset from back panel
- NMI AUTHORIZED :PIO5(SHUTOK) set
- Dynamic Boot from Bootp + flash NAND mother
- eth0: Setting 1 (0 half 1 full) based on negotiated link capability.
- IP address determination
- ============================
- BOOTP request in progress -> 0:80:9f:36:8b:42
- *RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,*RcvTO,TOIPRcv,
- Connection timed out : BOOTP server not responding.
- new console=ttyS0
- BOOT Sector Found on NAND Flash Drive #0
- Shutdown of the interface 0 =00000000
- init ethernet interface 1 not done
- Watch dog started
- new console=ttyS0
- GRUB - Detected ASPEN BIOS Version >= 8.0 (3EH30227EGAA bios100/008.031)
- BOOT_DRIVE = 10, oneshot = A7
- GRUB version 0.5.92 (1024K lower / 64512K upper memory)
- Use keys for selecting an entry
- Press enter to boot, 'e' to edit or 'c' for a command-line.
- Linux
- Booting 'Linux' ...
- [Linux-bzImage, setup=0x800, size=0x7C8C0]
- [Linux-initrd @ 0x3B25000, 0x4DA400 bytes]
- Linux version 2.4.17-rt3.1 (alize100@cyclope) (gcc version 2.95.3 20010315 (release)) #2 Wed Aug 31 20:04:19 MEST 2005
- TARGET : ALIZE with CPU ASPEN
- CLOCK_TICK_RATE=1189200
- BIOS-provided physical RAM map with chipset constraints 3 :
- BIOS-e820: 0000000000000000 - 00000000000fffff (usable)
- BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
- final contents of e820: 0000000000000000 - 00000000000fffff (usable)
- final contents of e820: 0000000000100000 - 0000000004000000 (usable)
- On node 0 totalpages: 16384
- zone(0): 4096 pages.
- zone(1): 12288 pages.
- zone(2): 0 pages.
- Kernel command line: console=ttyS0
- Initializing CPU#0
- Calibrating delay loop... 65.74 BogoMIPS
- Memory: 58260k/65536k available (780k kernel code, 7272k reserved, 187k data, 60k init, 0k highmem)
- Checking if this processor honours the WP bit even in supervisor mode... Ok.
- ASPEN : MMCR mapped at 0xC4800000
- Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
- Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
- Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
- CPU: AMD 486 DX/4-WB stepping 04
- Checking 'hlt' instruction... OK.
- POSIX conformance testing by UNIFIX
- PCI: Using configuration type 1
- PCI: Probing PCI hardware
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- Initializing RT netlink socket
- Starting kswapd
- pty: 256 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
- Serial port Fifo trigger forced to 4 Bytes
- ttyS00 at 0x03f8 (irq = 4) is a 16550A
- ttyS01 at 0x02f8 (irq = 3) is a 16550A
- Real Time Clock Driver v1.10e
- block: 128 slots per queue, batch=32
- RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
- Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
- Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 4096 bind 4096)
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- cryptoapi: loaded
- RAMDISK: ext2 filesystem found at block 0
- RAMDISK: Loading 4969 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
- Freeing initrd memory: 4969k freed
- EXT2-fs warning: checktime reached, running e2fsck is recommended
- e2compr 0.4.43 (2002-04-12) loading.
- VFS: Mounted root (ext2 filesystem).
- Freeing unused kernel memory: 60k freed
- serial console detected. Disabling virtual terminals.
- console=/dev/ttyS0
- init started: BusyBox v0.47 () multi-call binary -- GPL2
- **************************************
- ** Executing /etc/rcS (autorun) **
- **************************************
- do_setup_path /bin:/sbin:/usr/bin:/usr/sbin
- -------------------------------------------
- do_mount_proc
- -------------
- do_set_root_writeable
- ---------------------
- do_sync_time_using_rtc
- ----------------------
- do_set_hostname
- ---------------
- do_modules_dependencies
- -----------------------
- do_insert_alz_driver
- --------------------
- Using /lib/modules/2.4.17-rt3.1/misc/alz_driver.o
- do_source_proc_file /proc/alize/cpuconf
- ---------------------------------------
- do_compute_prerequisites hard_disk_detected xmem_detected aspen_cpu pIII_cpu main_cpu appli_cpu ia_board voip_board boot_on_flash boot_on_ether boot_on_hard_disk
- -----------------------------------------------------------------------------------------------------------------------------------------------------------------
- do_mbuff_console
- ----------------
- Using /lib/modules/2.4.17-rt3.1/misc/mbuff.o
- mbuff: kernel shared memory driver v0.7.2 for Linux 2.4.17-rt3.1
- mbuff: (C) Tomasz Motylewski et al., GPL
- mbuff: registered as MISC device minor 254
- Using /lib/modules/2.4.17-rt3.1/misc/alz_console.o
- Console driver found: driver_name= serial; name= ttyS
- do_init_devices /dev/fla /dev/flb /dev/hda
- ------------------------------------------
- do_check_or_format /dev/fla
- ---------------------------
- Remount - Forces the media to be remounted
- Datalight FlashFx
- V4.05.309
- Copyright (c) 1993-2000
- Patent US#5860082
- Flashfx revision number 520.003.400
- Disk Remounted
- fsck 1.25.9 (10-Dec-2001)
- e2fsck 1.25.9 (10-Dec-2001)
- Flash redundant read R/B at block end : Yes
- /dev/fla: clean, 1021/2048 files, 25504/62874 blocks
- do_init_fstab_mtab
- ------------------
- do_mount_partitions /dev/fla
- ----------------------------
- do_check_mnt_flash_boot
- -----------------------
- do_move_h_anos_to_flash
- -----------------------
- do_check_failsafe
- -----------------
- [do_check_failsafe] l3792: --->
- [do_check_failsafe] l3793: --->
- [do_check_failsafe] l3794: ---> ################################################################################
- [do_check_failsafe] l3795: ---> ##### FAILSAFE MODE #### broken hard disk? #### FAILSAFE MODE #####
- [do_check_failsafe] l3796: ---> ################################################################################
- [do_check_failsafe] l3797: --->
- [do_check_failsafe] l3798: --->
- do_source_ata66
- ---------------
- do_insert_disk_modules
- ----------------------
- Uniform Multi-Platform E-IDE driver Revision: 6.31
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- hda: TOSHIBA MK3021GAS, ATA DISK drive
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- hda: 58605120 sectors (30006 MB), CHS=58140/16/63
- Partition check:
- hda: hda1 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
- do_compute_hd_serial
- --------------------
- do_check_new_disk
- -----------------
- do_check_old_disk
- -----------------
- do_detect_disk_spooffing
- ------------------------
- do_save_hdserial
- ----------------
- do_save_old_hdserial
- --------------------
- do_failsafe_try_to_reboot_on_disk
- ---------------------------------
- do_may_partition_new_disk
- -------------------------
- do_failsafe_discards_xmem
- -------------------------
- do_check_if_killed /dev/flb
- ---------------------------
- do_mount_temporarily /dev/flb /mnt/flashext
- -------------------------------------------
- Remount - Forces the media to be remounted
- Datalight FlashFx
- V4.05.309
- Copyright (c) 1993-2000
- Patent US#5860082
- Invalid Drive!
- do_compute_xmem_nand_serial
- ---------------------------
- do_check_new_xmem
- -----------------
- do_save_xmem_serial
- -------------------
- do_umount_temporarily /dev/flb /mnt/flashext
- --------------------------------------------
- do_may_partition_xmem
- ---------------------
- do_check_or_format /dev/flb
- ---------------------------
- do_mount_partitions /dev/flb
- ----------------------------
- do_failsafe_discards_old_disk
- -----------------------------
- do_setup_hard_disk_partitions
- -----------------------------
- do_partition_new_hard_disk
- --------------------------
- do_check_or_format /dev/hda1 /dev/hda10 /dev/hda11 /dev/hda12 /dev/hda13 /dev/hda2 /dev/hda3 /dev/hda4 /dev/hda5 /dev/hda6 /dev/hda7 /dev/hda8 /dev/hda9
- --------------------------------------------------------------------------------------------------------------------------------------------------------
- do_mount_partitions /dev/hda1 /dev/hda10 /dev/hda11 /dev/hda12 /dev/hda13 /dev/hda2 /dev/hda3 /dev/hda4 /dev/hda5 /dev/hda6 /dev/hda7 /dev/hda8 /dev/hda9
- ---------------------------------------------------------------------------------------------------------------------------------------------------------
- do_hide_discarded_disk
- ----------------------
- rmmod: module noflushd is not loaded
- ##########################################################
- ################ ####################
- ############### DUMP OF RCS COMMANDS ###################
- ################ ####################
- ##########################################################
- [] l47: ---> **************************************
- [] l55: ---> ** Executing /etc/rcS (autorun) **
- [] l2995-2997: 0 2995 setting prerequisite..................................... [ [34;47mautorun_ramdisk[0m ]
- [] l59: ---> **************************************
- do_setup_path /bin:/sbin:/usr/bin:/usr/sbin
- -------------------------------------------
- [do_setup_path] l65: ---> PATH=/bin:/sbin:/usr/bin:/usr/sbin
- do_mount_proc
- -------------
- [do_mount_proc] l71-73: 0 71 mounting /proc virtual filesystem.............................. [ [34;47mOK[0m ]
- do_set_root_writeable
- ---------------------
- [do_set_root_writeable] l78-80: 0 78 Remounting root filesystem in read-write mode.................. [ [34;47mOK[0m ]
- do_sync_time_using_rtc
- ----------------------
- [do_sync_time_using_rtc]l85-87: 0 85 Syncing system time with RTC................................... [ [34;47mOK[0m ]
- do_set_hostname
- ---------------
- [do_set_hostname] l92-94: 0 92 checking if /etc/HOSTNAME exists............................... [ [34;47mmissing -> using ''[0m ]
- do_modules_dependencies
- -----------------------
- [do_modules_dependenciesl101-103: 0 101 setting up module dependencies.............................. [ [34;47mOK[0m ]
- [do_modules_dependenciesl105-107: 0 105 checking user-space module loader for kmod.................. [ [34;47m/sbin/modprobe[0m ]
- do_insert_alz_driver
- --------------------
- [do_insert_alz_driver] l284-286: 0 284 looking for module alz_driver.o............................. [ [34;47mfound[0m ]
- [do_insert_alz_driver] l290-292: 0 290 inserting module alz_driver................................. [ [34;47mOK[0m ]
- [do_insert_alz_driver] l298-300: 0 298 checking the cpuconf file................................... [ [34;47mOK[0m ]
- do_source_proc_file /proc/alize/cpuconf
- ---------------------------------------
- [do_source_proc_file] l333-335: 0 333 using tmp file /tmp/rcS.tmp................................. [ [34;47mOK[0m ]
- [do_source_proc_file] l339-341: 0 339 adding +rx permissions...................................... [ [34;47mOK[0m ]
- [do_source_proc_file] l345-347: 0 345 sourcing script............................................. [ [34;47mOK[0m ]
- [do_source_proc_file] l351-353: 0 351 removing temp file /tmp/rcS.tmp............................. [ [34;47mOK[0m ]
- do_compute_prerequisites hard_disk_detected xmem_detected aspen_cpu pIII_cpu main_cpu appli_cpu ia_board voip_board boot_on_flash boot_on_ether boot_on_hard_disk
- -----------------------------------------------------------------------------------------------------------------------------------------------------------------
- [do_compute_prerequisitel3085: ---> . [OK] setting prerequisite [34;47mhard_disk_detected[0m
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mxmem_detected[0m
- [do_compute_prerequisitel3085: ---> . [OK] setting prerequisite [34;47maspen_cpu[0m
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mpIII_cpu[0m
- [do_compute_prerequisitel3085: ---> . [OK] setting prerequisite [34;47mmain_cpu[0m
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mappli_cpu[0m
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mia_board[0m
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mvoip_board[0m
- [do_compute_prerequisitel3085: ---> . [OK] setting prerequisite [34;47mboot_on_flash[0m
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mboot_on_ether[0m
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mboot_on_hard_disk[0m
- do_mbuff_console
- ----------------
- [do_mbuff_console] l2987-2989: 0 2987 prerequisites : main_cpu................................. [ [34;47mOK[0m ]
- [do_mbuff_console] l378-380: 0 378 inserting mbuff driver (contiguous RAM manager)............. [ [34;47mOK[0m ]
- [do_mbuff_console] l383-385: 0 383 configuring mbuff driver.................................... [ [34;47mOK[0m ]
- [do_mbuff_console] l388-390: 0 388 activating alize console.................................... [ [34;47mOK[0m ]
- do_init_devices /dev/fla /dev/flb /dev/hda
- ------------------------------------------
- [do_init_devices] l452: ---> initializing data for partition /dev/fla
- [do_init_devices] l453: ---> SIZE 64
- [do_init_devices] l454: ---> MOUNTABLE 1
- [do_init_devices] l455: ---> FORMATED 1
- [do_init_devices] l456: ---> FXFMT 1
- [do_init_devices] l457: ---> MOUNT_TYPE ext2
- [do_init_devices] l458: ---> MKFS_TYPE 83
- [do_init_devices] l459: ---> MOUNTPOINT /mnt/flash
- [do_init_devices] l472-474: 0 472 checking if we boot on the NAND flash of the main cpu....... [ [34;47mNO[0m ]
- [do_init_devices] l502: ---> /dev/flb : no XMEM NAND flash
- [do_init_devices] l2995-2997: 0 2995 setting prerequisite..................................... [ [34;47mdiscarded_xmem[0m ]
- [do_init_devices] l3197: ---> ###############################
- [do_init_devices] l3198: ---> DISCARDING DEVICE /dev/flb
- [do_init_devices] l3199: ---> ###############################
- [do_init_devices] l521: ---> initializing data for partition /dev/hda
- [do_init_devices] l522: ---> SIZE 28615
- [do_init_devices] l523: ---> MOUNTABLE 1
- [do_init_devices] l524: ---> FORMATED 1
- do_check_or_format /dev/fla
- ---------------------------
- [do_check_or_format] l569: ---> treating device /dev/fla
- [do_check_or_format] l573-575: 0 573 checking if /dev/fla is a block device...................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/fla is a valid device...................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/fla is discarded........................... [ [34;47mNO[0m ]
- [do_check_or_format] l612: ---> device /dev/fla needs low-level mount
- [do_check_or_format] l613-615: 1 613 fxremnt /dev/fla............................................ [ [34;47mOK[0m ]
- [do_check_or_format] l677-679: 0 677 checking if fla needs format................................ [ [34;47mno[0m ]
- [do_check_or_format] l683-686: 0 683 checking if I should filecheck the dev...................... [ [34;47myes[0m ]
- [do_check_or_format] l697-699: 1 697 test if /dev/fla is to be formated.......................... [ [34;47mno[0m ]
- [do_check_or_format] l706: ---> Disabling watchdog before fsck
- [do_check_or_format] l708-713: 0 708 checking /dev/fla [fsck -C -y /dev/fla].................... [ [34;47mOK[0m ]
- [do_check_or_format] l728-730: 0 728 testing if /dev/fla needs formatting........................ [ [34;47mnot needed[0m ]
- do_init_fstab_mtab
- ------------------
- [do_init_fstab_mtab] l821: ---> Mounting local filesystems
- [do_init_fstab_mtab] l828-830: 0 828 remounting / read-write..................................... [ [34;47mOK[0m ]
- [do_init_fstab_mtab] l834-836: 0 834 mounting devpts............................................. [ [34;47mOK[0m ]
- do_mount_partitions /dev/fla
- ----------------------------
- [do_mount_partitions] l879: ---> treating device /dev/fla
- [do_mount_partitions] l886-888: 0 886 checking if /dev/fla is a block device...................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/fla is a valid device...................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/fla is discarded........................... [ [34;47mNO[0m ]
- [do_mount_partitions] l920-923: 1 920 checking if /dev/fla is an regular partition................ [ [34;47mext2[0m ]
- [do_mount_partitions] l932-934: 0 932 checking if /dev/fla is an EXT2 partition................... [ [34;47mYES[0m ]
- [do_mount_partitions] l942-944: 0 942 checking if the mountpoint [/mnt/flash] is already in use... [ [34;47mNO[0m ]
- [do_mount_partitions] l951-953: 1 951 checking that /mnt/flash is a directory..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l970-972: 0 970 mounting /mnt/flash with fstype ext2........................ [ [34;47mOK[0m ]
- [do_mount_partitions] l1017-1019: 0 1017 checking if VERBOSITY is required........................ [ [34;47mNO[0m ]
- [do_mount_partitions] l1026: ---> updating fstab with [/dev/fla /mnt/flash ext2 defaults,noatime,noauto 0 3]
- do_check_mnt_flash_boot
- -----------------------
- [do_check_mnt_flash_bootl1969-1971: 0 1969 make sure the flash is mounted........................... [ [34;47mOK[0m ]
- [do_check_mnt_flash_bootl1975-1977: 0 1975 checking boot dir........................................ [ [34;47mOK[0m ]
- [do_check_mnt_flash_bootl1981-1983: 0 1981 checking boot dir (in case it did not exist)............. [ [34;47mOK[0m ]
- do_move_h_anos_to_flash
- -----------------------
- [do_move_h_anos_to_flashl3441-3443: 0 3441 checking if the flash is mounted......................... [ [34;47mOK[0m ]
- [do_move_h_anos_to_flashl3446-3448: 0 3446 moving anomalies from RAM to flash....................... [ [34;47mOK[0m ]
- [do_move_h_anos_to_flashl3451-3453: 0 3451 removing hard anos ramdisk file.......................... [ [34;47mOK[0m ]
- [do_move_h_anos_to_flashl3456-3458: 0 3456 linking /h_anomalies -> /mnt/flash/boot/h_anomalies...... [ [34;47mOK[0m ]
- do_check_failsafe
- -----------------
- [do_check_failsafe] l2987-2989: 0 2987 prerequisites : boot_on_flash............................ [ [34;47mOK[0m ]
- [do_check_failsafe] l3784-3786: 0 3784 checking if the file /mnt/flash/hd_saved_on_flash exists. [ [34;47myes[0m ]
- [do_check_failsafe] l3792: --->
- [do_check_failsafe] l3793: --->
- [do_check_failsafe] l3794: ---> ################################################################################
- [do_check_failsafe] l3795: ---> ##### FAILSAFE MODE #### broken hard disk? #### FAILSAFE MODE #####
- [do_check_failsafe] l3796: ---> ################################################################################
- [do_check_failsafe] l3797: --->
- [do_check_failsafe] l3798: --->
- [do_check_failsafe] l2995-2997: 0 2995 setting prerequisite..................................... [ [34;47mfailsafe_mode[0m ]
- do_source_ata66
- ---------------
- [do_source_ata66] l2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mOK[0m ]
- [do_source_ata66] l333-335: 0 333 using tmp file /tmp/rcS.tmp................................. [ [34;47mOK[0m ]
- [do_source_ata66] l339-341: 0 339 adding +rx permissions...................................... [ [34;47mOK[0m ]
- [do_source_ata66] l345-347: 0 345 sourcing script............................................. [ [34;47mOK[0m ]
- [do_source_ata66] l351-353: 0 351 removing temp file /tmp/rcS.tmp............................. [ [34;47mOK[0m ]
- do_insert_disk_modules
- ----------------------
- [do_insert_disk_modules]l2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mOK[0m ]
- [do_insert_disk_modules]l1640-1642: 0 1640 Checking for ATA66 force................................. [ [34;47mno ATA66[0m ]
- [do_insert_disk_modules]l1650-1652: 1 1650 inserting rawsync_ide.................................... [ [34;47mOK[0m ]
- [do_insert_disk_modules]l1658-1660: 0 1658 inserting all the ide modules............................ [ [34;47mOK[0m ]
- do_compute_hd_serial
- --------------------
- [do_compute_hd_serial] l1835: ---> testing if the disk is missing..
- [do_compute_hd_serial] l1838: ---> ..disk detected
- [do_compute_hd_serial] l2987-2989: 0 2987 prerequisites : not discarded_hard_disk.................. [ [34;47mOK[0m ]
- [do_compute_hd_serial] l1855-1857: 0 1855 checking if I need to insert the ide modules............. [ [34;47mno[0m ]
- [do_compute_hd_serial] l1875-1877: 0 1875 computing new serial number.............................. [ [34;47m5a33 3941 3135 3131 5420 2020 2020 2020 2020 2020[0m ]
- [do_compute_hd_serial] l1881-1885: 0 1881 sanitizing serial number................................. [ [34;47m5a33 3941 3135 3131 5420 2020 2020 2020 2020 2020[0m ]
- do_check_new_disk
- -----------------
- [do_check_new_disk] l2987-2989: 0 2987 prerequisites : not discarded_hard_disk.................. [ [34;47mOK[0m ]
- [do_check_new_disk] l2008-2010: 0 2008 sanitizing hdserial...................................... [ [34;47mOK[0m ]
- [do_check_new_disk] l2014-2016: 0 2014 reading old hdserial..................................... [ [34;47m5a33 3941 3135 3131 5420 2020 2020 2020 2020 2020[0m ]
- [do_check_new_disk] l2022-2024: 0 2022 checking if the disk is new or old....................... [ [34;47mnot new[0m ]
- do_check_old_disk
- -----------------
- [do_check_old_disk] l2987-2989: 0 2987 prerequisites : not discarded_hard_disk.................. [ [34;47mOK[0m ]
- [do_check_old_disk] l2058-2060: 0 2058 sanitizing non-empty hdserial............................ [ [34;47mOK[0m ]
- [do_check_old_disk] l2063-2065: 0 2063 reading old hdserial..................................... [ [34;47m5a33 3941 3135 3131 5420 2020 2020 2020 2020 2020[0m ]
- [do_check_old_disk] l2071-2073: 0 2071 checking if the disk is old.............................. [ [34;47mOLD[0m ]
- [do_check_old_disk] l2995-2997: 0 2995 setting prerequisite..................................... [ [34;47mold_disk[0m ]
- do_detect_disk_spooffing
- ------------------------
- [do_detect_disk_spooffinl2987-2989: 0 2987 prerequisites : boot_on_hard_disk new_disk............... [ [34;47mboot_on_hard_disk = false[0m ]
- do_save_hdserial
- ----------------
- [do_save_hdserial] l1903-1905: 0 1903 saving HD serial in flash................................ [ [34;47m5a33 3941 3135 3131 5420 2020 2020 2020 2020 2020[0m ]
- do_save_old_hdserial
- --------------------
- [do_save_old_hdserial] l1922-1924: 0 1922 checking if the hdserial is empty........................ [ [34;47mnon-empty[0m ]
- [do_save_old_hdserial] l1926-1928: 1 1926 saving old HD serial in /mnt/flash/boot/last_plugged_hd.. [ [34;47m5a33 3941 3135 3131 5420 2020 2020 2020 2020 2020[0m ]
- do_failsafe_try_to_reboot_on_disk
- ---------------------------------
- [do_failsafe_try_to_rebol2987-2989: 0 2987 prerequisites : hard_disk_detected boot_on_flash failsafe [ [34;47mnew_disk = false[0m ]
- do_may_partition_new_disk
- -------------------------
- [do_may_partition_new_dil2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mnew_disk = false[0m ]
- do_failsafe_discards_xmem
- -------------------------
- [do_failsafe_discards_xml2987-2989: 0 2987 prerequisites : xmem_detected not discarded_xmem failsafe [ [34;47mxmem_detected = false[0m ]
- do_check_if_killed /dev/flb
- ---------------------------
- [do_check_if_killed] l3478-3480: 0 3478 testing if /dev/flb was killed........................... [ [34;47mno[0m ]
- do_mount_temporarily /dev/flb /mnt/flashext
- -------------------------------------------
- [do_mount_temporarily] l3619-3621: 0 3619 low level mount of /dev/flb.............................. [ [34;47mKO[0m ]
- do_compute_xmem_nand_serial
- ---------------------------
- [do_compute_xmem_nand_sel2987-2989: 0 2987 prerequisites : xmem_detected ........................... [ [34;47mxmem_detected = false[0m ]
- do_check_new_xmem
- -----------------
- [do_check_new_xmem] l2987-2989: 0 2987 prerequisites : xmem_detected not discarded_xmem......... [ [34;47mxmem_detected = false[0m ]
- do_save_xmem_serial
- -------------------
- [do_save_xmem_serial] l2987-2989: 0 2987 prerequisites : xmem_detected............................ [ [34;47mxmem_detected = false[0m ]
- do_umount_temporarily /dev/flb /mnt/flashext
- --------------------------------------------
- [do_umount_temporarily] l3668-3670: 0 3668 umounting /dev/flb....................................... [ [34;47mKO[0m ]
- [do_umount_temporarily] l3002-3004: 1 3002 removing prerequisite.................................... [ [34;47mFLASHEXT_IS_MOUNTED[0m ]
- do_may_partition_xmem
- ---------------------
- [do_may_partition_xmem] l2987-2989: 0 2987 prerequisites : xmem_detected not discarded_xmem new_xmem [ [34;47mxmem_detected = false[0m ]
- do_check_or_format /dev/flb
- ---------------------------
- [do_check_or_format] l569: ---> treating device /dev/flb
- [do_check_or_format] l573-575: 0 573 checking if /dev/flb is a block device...................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/flb is a valid device...................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/flb is discarded........................... [ [34;47mDISCARDED![0m ]
- do_mount_partitions /dev/flb
- ----------------------------
- [do_mount_partitions] l879: ---> treating device /dev/flb
- [do_mount_partitions] l886-888: 0 886 checking if /dev/flb is a block device...................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/flb is a valid device...................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/flb is discarded........................... [ [34;47mDISCARDED[0m ]
- do_failsafe_discards_old_disk
- -----------------------------
- [do_failsafe_discards_oll2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mOK[0m ]
- [do_failsafe_discards_oll2995-2997: 0 2995 setting prerequisite..................................... [ [34;47mdiscarded_hard_disk[0m ]
- [do_failsafe_discards_oll2995-1444: 0 2995 setting prerequisite..................................... [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda1
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda1................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda10
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda10............................... [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda11
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda11............................... [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda12
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda12............................... [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda13
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda13............................... [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda2
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda2................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda3
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda3................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda4
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda4................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda5
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda5................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda6
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda6................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda7
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda7................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda8
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda8................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll3197: ---> ###############################
- [do_failsafe_discards_oll3198: ---> DISCARDING DEVICE /dev/hda9
- [do_failsafe_discards_oll3199: ---> ###############################
- [do_failsafe_discards_oll1456-1458: 0 1456 discarding partition hda9................................ [ [34;47mOK[0m ]
- [do_failsafe_discards_oll1463-1465: 0 1463 setting the hard disc size to 0.......................... [ [34;47mOK[0m ]
- do_setup_hard_disk_partitions
- -----------------------------
- [do_setup_hard_disk_partl2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mnot discarded_hard_disk = false[0m ]
- do_partition_new_hard_disk
- --------------------------
- [do_partition_new_hard_dl2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mnot discarded_hard_disk = false[0m ]
- do_check_or_format /dev/hda1 /dev/hda10 /dev/hda11 /dev/hda12 /dev/hda13 /dev/hda2 /dev/hda3 /dev/hda4 /dev/hda5 /dev/hda6 /dev/hda7 /dev/hda8 /dev/hda9
- --------------------------------------------------------------------------------------------------------------------------------------------------------
- [do_check_or_format] l569: ---> treating device /dev/hda1
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda1 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda1 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda1 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda10
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda10 is a block device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda10 is a valid device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda10 is discarded......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda11
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda11 is a block device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda11 is a valid device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda11 is discarded......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda12
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda12 is a block device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda12 is a valid device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda12 is discarded......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda13
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda13 is a block device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda13 is a valid device.................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda13 is discarded......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda2
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda2 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda2 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda2 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda3
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda3 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda3 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda3 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda4
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda4 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda4 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda4 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda5
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda5 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda5 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda5 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda6
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda6 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda6 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda6 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda7
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda7 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda7 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda7 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda8
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda8 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda8 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda8 is discarded.......................... [ [34;47mDISCARDED![0m ]
- [do_check_or_format] l569: ---> treating device /dev/hda9
- [do_check_or_format] l573-575: 0 573 checking if /dev/hda9 is a block device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l583-585: 0 583 checking if /dev/hda9 is a valid device..................... [ [34;47mOK[0m ]
- [do_check_or_format] l592-594: 0 592 checking if /dev/hda9 is discarded.......................... [ [34;47mDISCARDED![0m ]
- do_mount_partitions /dev/hda1 /dev/hda10 /dev/hda11 /dev/hda12 /dev/hda13 /dev/hda2 /dev/hda3 /dev/hda4 /dev/hda5 /dev/hda6 /dev/hda7 /dev/hda8 /dev/hda9
- ---------------------------------------------------------------------------------------------------------------------------------------------------------
- [do_mount_partitions] l879: ---> treating device /dev/hda1
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda1 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda1 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda1 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda10
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda10 is a block device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda10 is a valid device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda10 is discarded......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda11
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda11 is a block device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda11 is a valid device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda11 is discarded......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda12
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda12 is a block device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda12 is a valid device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda12 is discarded......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda13
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda13 is a block device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda13 is a valid device.................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda13 is discarded......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda2
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda2 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda2 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda2 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda3
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda3 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda3 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda3 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda4
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda4 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda4 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda4 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda5
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda5 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda5 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda5 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda6
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda6 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda6 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda6 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda7
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda7 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda7 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda7 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda8
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda8 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda8 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda8 is discarded.......................... [ [34;47mDISCARDED[0m ]
- [do_mount_partitions] l879: ---> treating device /dev/hda9
- [do_mount_partitions] l886-888: 0 886 checking if /dev/hda9 is a block device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l897-899: 0 897 checking if /dev/hda9 is a valid device..................... [ [34;47mOK[0m ]
- [do_mount_partitions] l909-911: 0 909 checking if /dev/hda9 is discarded.......................... [ [34;47mDISCARDED[0m ]
- do_hide_discarded_disk
- ----------------------
- [do_hide_discarded_disk]l2987-2989: 0 2987 prerequisites : hard_disk_detected discarded_hard_disk no [ [34;47mOK[0m ]
- [do_hide_discarded_disk]l1550-1552: 0 1550 renaming noflushd........................................ [ [34;47mOK[0m ]
- [do_hide_discarded_disk]l1557-1559: 0 1557 removing mod-noflushd.................................... [ [34;47mKO[0m ]
- [do_hide_discarded_disk]l1564-1567: 1 1564 removing module rawsync_ide.............................. [ [34;47mOK[0m ]
- [do_hide_discarded_disk]l1574-1576: 1 1574 cleaning /proc/rawsync/printk............................ [ [31;47mKO => aborting[0m ]
- ################ END DUMP OF RCS ####################
- ##########################################################
- do_compute_soft_location
- ------------------------
- [do_compute_soft_locatiol1289-1291: 0 1289 checking if BIOS boots the HD............................ [ [34;47mno[0m ]
- [do_compute_soft_locatiol1327-1329: 0 1327 checking if the BIOS boots on flash...................... [ [34;47mboot on NAND flash.[0m ]
- [do_compute_soft_locatiol1334: ---> ACTUAL_SOFT_LOCATION=/mnt/flash
- do_set_soft_mountpoint
- ----------------------
- [do_set_soft_mountpoint]l1389: ---> ===========================================
- [do_set_soft_mountpoint]l1390: ---> === /mnt/soft -> /mnt/flash
- [do_set_soft_mountpoint]l1391: ---> ===========================================
- [do_set_soft_mountpoint]l1397-1399: 0 1397 checking that /mnt/soft/boot exists...................... [ [34;47mOK[0m ]
- [do_set_soft_mountpoint]l1403-1405: 0 1403 checking that /mnt/soft/boot was created................. [ [34;47mOK[0m ]
- do_check_last_plugged_xmem
- --------------------------
- [do_check_last_plugged_xl2987-2989: 0 2987 prerequisites : xmem_detected not discarded_xmem new_xmem [ [34;47mxmem_detected = false[0m ]
- do_set_cold_reset
- -----------------
- [do_set_cold_reset] l2987-2989: 0 2987 prerequisites : cold_reset............................... [ [34;47mcold_reset = false[0m ]
- do_set_cold_reset
- -----------------
- [do_set_cold_reset] l2987-2989: 0 2987 prerequisites : cold_reset............................... [ [34;47mcold_reset = false[0m ]
- do_rawsync_printk_traces
- ------------------------
- [do_rawsync_printk_tracel2562: ---> check if there is something to save
- [do_rawsync_printk_tracel2565-2567: 0 2565 test if the log buffer is empty.......................... [ [34;47mempty[0m ]
- [do_rawsync_printk_tracel2574-2576: 1 2574 removing printk buffer................................... [ [34;47mOK[0m ]
- rawsync_file_init : /proc/rawsync/printk created
- rawsync_file_init : /proc/rawsync/debug created
- [do_rawsync_printk_tracel2582-2584: 0 2582 inserting module rawsync_file............................ [ [34;47mOK[0m ]
- [do_rawsync_printk_tracel2589-2591: 0 2589 checking if module rawsync_file is set up................ [ [34;47mOK[0m ]
- 16+0 records in
- 16+0 records out
- [do_rawsync_printk_tracel2597-25file /mnt/soft/printk_buf_DO_NOT_EDIT_OR_REMOVE___YOU_HAVE_BEEN_WARNED configured for raw synchronous dump
- 99: 0 2597 resetting the printk raw buffer.......................... [ [34;47mOK[0m ]
- [do_rawsync_printk_tracel2604-2606: 0 2604 pinning down the blocks of file /mnt/soft/printk_buf_*... [ [34;47mOK[0m ]
- do_crashdump_setup
- ------------------
- [do_crashdump_setup] l2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mnot discarded_hard_disk = false[0m ]
- do_setup_swap
- -------------
- [do_setup_swap] l2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mnot discarded_hard_disk = false[0m ]
- do_setup_vmu_dir
- ----------------
- [do_setup_vmu_dir] l2388: ---> searching vmu dir
- [do_setup_vmu_dir] l2392-2394: 0 2392 checking if /mnt/flash is mounted........................ [ [34;47myes[0m ]
- [do_setup_vmu_dir] l2401-2403: 0 2401 checking if /mnt/flash/vmu exists........................ [ [34;47myes[0m ]
- [do_setup_vmu_dir] l2392-2394: 0 2392 checking if /mnt/flashext is mounted..................... [ [34;47mno[0m ]
- [do_setup_vmu_dir] l2392-2394: 0 2392 checking if /mnt/shared is mounted....................... [ [34;47mno[0m ]
- do_set_var_log
- --------------
- [do_set_var_log] l2438-2440: 0 2438 checking if there is a disk.............................. [ [34;47mno[0m ]
- [do_set_var_log] l2509: ---> no hard disk
- [do_set_var_log] l2511-2513: 0 2511 setting up /var/log...................................... [ [34;47mcreating it[0m ]
- [do_set_var_log] l2520-2522: 0 2520 setting up permissions of /var/log....................... [ [34;47mOK[0m ]
- [do_set_var_log] l2527-2529: 0 2527 setting up /var/log/old.................................. [ [34;47mcreating it[0m ]
- [do_set_var_log] l2536-2538: 0 2536 setting up permissions of /var/log/old................... [ [34;47mOK[0m ]
- do_start_therm_supervision
- --------------------------
- [do_start_therm_supervisl2987-2989: 0 2987 prerequisites : pIII_cpu................................. [ [34;47mpIII_cpu = false[0m ]
- [do_start_therm_supervisl2536-3114: 0 2536 setting up permissions of /var/log/old................... [ [34;47mssid=0[0m ]
- do_set_tmp
- ----------
- [do_set_tmp] l2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mnot discarded_hard_disk = false[0m ]
- do_init_backup
- --------------
- [do_init_backup] l2987-2989: 0 2987 prerequisites : ia_board................................. [ [34;47mia_board = false[0m ]
- do_save_dlr_file
- ----------------
- [do_save_dlr_file] l2987-2989: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mnot discarded_hard_disk = false[0m ]
- [do_save_dlr_file] l2844: ---> save the swl/dlr file using CRONTAB
- [do_save_dlr_file] l2987-2847: 0 2987 prerequisites : hard_disk_detected not discarded_hard_dis [ [34;47mOK[0m ]
- do_compute_prerequisites nosecure
- ---------------------------------
- [do_compute_prerequisitel3087: ---> . [KO] unset prerequisite [34;47mnosecure[0m
- do_handle_securetty
- -------------------
- [do_handle_securetty] l2987-2989: 0 2987 prerequisites : nosecure................................. [ [34;47mnosecure = false[0m ]
- do_handle_watchdog
- ------------------
- [do_handle_watchdog] l142: ---> starting watchdog (for the fun of it)
- [do_handle_watchdog] l147-157: 0 147 stopping the watchdog (same reason)......................... [ [34;47mok[0m ]
- [do_handle_watchdog] l163-165: 0 163 testing if I run on a development ramdisk................... [ [34;47mno[0m ]
- [do_handle_watchdog] l180-182: 0 180 testing if albator is to be started......................... [ [34;47myes[0m ]
- [do_handle_watchdog] l197-207: 0 197 starting the watchdog....................................... [ [34;47mok[0m ]
- insmod loop max_loop=32
- -----------------------
- Using /lib/modules/2.4.17-rt3.1/kernel/drivers/block/loop.o
- loop: loaded (max 32 devices)
- do_init_wutmp
- -------------
- [do_init_wutmp] l247-249: 0 247 making sure /var/log/wtmp exists............................ [ [34;47mOK[0m ]
- [do_init_wutmp] l251-253: 0 251 touching utmp............................................... [ [34;47mOK[0m ]
- [do_init_wutmp] l255-257: 0 255 changing permissions for utmp............................... [ [34;47mOK[0m ]
- do_init_cron
- ------------
- [do_init_cron] l263-265: 0 263 making sure /var/spool/cron/atjobs/.SEQ exists.............. [ [34;47mOK[0m ]
- [do_init_cron] l267-269: 0 267 changing permissions of the SEQ file........................ [ [34;47mOK[0m ]
- do_save_dmesg
- -------------
- [do_save_dmesg] l239-241: 0 239 saving dmesg in /var/log/dmesg.............................. [ [34;47mOK[0m ]
- do_remove_brest_hidden_access
- -----------------------------
- [do_remove_brest_hidden_l218-220: 0 218 testing if the box may have light authentication............ [ [34;47mno[0m ]
- [do_remove_brest_hidden_l224-226: 0 224 try to remove brest wart.................................... [ [34;47mKO[0m ]
- do_run_other_rcs_scripts
- ------------------------
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/01modules
- Insert crypto modules
- Using /lib/modules/2.4.17-rt3.1/kernel/crypto/cryptoloop/cryptoloop.o
- cryptoloop: loaded
- Using /lib/modules/2.4.17-rt3.1/kernel/crypto/ciphers/cipher-des.o
- cryptoapi: Registered des-ecb (0)
- cryptoapi: Registered des-cbc (65536)
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/01modules............................................. [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/07syslog
- Starting system loggers....
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/07syslog.............................................. [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/09firewall
- !!! Firewall blocking everything from now !!!
- ip_tables: (C) 2000-2002 Netfilter core team
- ip_conntrack (512 buckets, 4096 max)
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/09firewall............................................ [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/10network
- IP config in /mnt/soft/ds/
- Warm reset, no bootp
- Network configured successfully.
- Setting hostname....
- IPv4 packet forwarding is disabled....
- Bringing up interface lo....
- SIOCADDRT: Network is unreachable
- Bringing up interface eth0....
- PCI: Setting latency timer of device 00:0c.0 to 64
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/10network............................................. [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/15dev_pwd
- do_get_devel_pwd
- ----------------
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/15dev_pwd............................................. [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/20random
- Initializing random number generator
- 1+0 records in
- 1+0 records out
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/20random.............................................. [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/40portmap
- Starting portmapper....
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/40portmap............................................. [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/50inetd
- Starting INET services....
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/50inetd............................................... [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/75hdisk
- ### HDPARM is fully disabled ...Done.
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/75hdisk............................................... [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/85integration
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/85integration......................................... [ [34;47mOK[0m ]
- [do_run_other_rcs_scriptl2922: ---> RCS : starting /etc/rcS.d/90albator
- eth0 Link encap:Ethernet HWaddr 00:80:9F:36:8B:42
- [1;30mSee output in [1;34m/var/log/albator[1;30m.[0;39m
- [do_run_other_rcs_scriptl224-2930: /etc/rcS.d/90albator............................................. [ [34;47mOK[0m ]
- do_check_erased_cmos
- --------------------
- [do_check_erased_cmos] l2868-2870: 0 2868 reading the status of the CMOS........................... [ [34;47mOK[0m ]
- [do_check_erased_cmos] l2878-2880: 0 2878 checking erased boot sequence in CMOS on the main........ [ [34;47mboot sequence OK[0m ]
- [do_check_erased_cmos] l2887-2889: 1 2887 checking if we are running an applicative cpu............ [ [34;47mno[0m ]
- do_register_boot_ok
- -------------------
- [do_register_boot_ok] l232-234: 0 232 acknowledging successfull boot to the bios.................. [ [34;47mOK[0m ]
- [--------> end of /etc/rcS script <---------]
- ---------------------------------------------
- ************************************
- * Running version ALZAA410/015.005 *
- ************************************
- ----- RetrieveFlashNorInfo -----
- NOR VERSION : Bios Version in soldered NOR flash : 3EH30227EGAA bios100/008.031 len = 28
- - Flash Nor Informations -
- Flash AMD
- Size : 512 Kbytes
- Number of sectors : 11
- ----- CompareBiosVersions -----
- current version is in /current/config.rc
- Line number of bios item 5
- CURRENT VERSION : Bios Version in the file 3EH30227EGAA bios100/008.031 len = 28
- *******************************
- * NO bios Update is necessary *
- *******************************
- RTLinux Extensions Loaded (http://www.fsmlabs.com/)
- Switch to RT time SUCCESS
- rt_ipc V0.3 -- IPC primitives for use with Real-Time Linux
- Copyright (C) 1997 Jerry Epplin. All rights reserved.
- Hard Disc temperature measurement will be performed each 300 seconds
- and will be stored to /var/log/hdtemp.log, if /mnt/soft/disable_hddtemp file is NOT present
- /usr/bin/mini_httpd: started as root without requesting chroot(), warning only
- Warning: ./rt_sig_mnt/rt_sig.o symbol for parameter isdn_trace_lvl not found
- Loading DSP binary file ...
- System info on main - IA no - VoIP yes - RAS no
- DSP binary file : /current/firmware.dsp
- Load DSP binary file SUCCESS (223287 bytes)
- Bexist : check filename=[/mnt/soft/nobooster]
- Bexist: allocated user memory OK addr=080c7000
- File /mnt/soft/nobooster doesn't exist : fd=(-2)
- Bexist: free user memory 4096 bytes address 080c7000
- Bexist : check filename=[/mnt/soft/wallmounted]
- Bexist: allocated user memory OK addr=080c8000
- File /mnt/soft/wallmounted doesn't exist : fd=(-2)
- Bexist: free user memory 4096 bytes address 080c8000
- MPMAPI:use rtl_no_interrupt
- Internal fifo:do not use rt_queue
- Periodx:use 8ms interrupt
- Maint timers shifted
- L1 timers 3 shifted
- new UA maint used
- Stack: start adresse: 0xc2820000 , size: 12000
- Stack: start adresse: 0xc2818000 , size: 20480
- msgmgr: allocating 28594 at c00a0010
- Stack: start adresse: 0xc2810000 , size: 20480
- Stack: start adresse: 0xc2808000 , size: 20480
- Start system in WARM mode
- Remanent Area Descriptor
- cooky : -21846
- n_area : 1
- area_size : 3679061
- elf_start : 0x8700E70
- elf_stop : 0x8A831C5
- area 0 : [0x8700E70 , 0x8A831C5]
- DEV = 1f10
- returning -1
- creating link /current/debug -> /mnt/soft/debug/
- cdgbBinit_com...server sd=-1 May be first time
- !!!!!==> Initializing socket on server side !!
- Creating socket for communication with sun_debug !!
- cdmVparseConfigRc() : dump of 'cdm_info_list' (loaded from 'config.rc')
- CDM_LP_CM_DATA_IDX = './dacm/dacm_ru.gz'
- CDM_RT_SIG_DATA_IDX = './dasig/dasig_ru.gz'
- CDM_LG_1_DTA_IDX = './lang/lang_ru.gz'
- CDM_LG_2_DTA_IDX = './lang/lang_gb.gz'
- loading CM country dependant data.
- CSLANG - C interpreter
- Copyright (C) 1999, 2000 Alcatel.
- Portions Copyright (C) 1995, 1996 Tudor Hulubei.
- Portions Copyright (c) 1989, 1990 James A. Roskind
- Parsing country data in progress...
- Running process 2812
- Starting running gzip to decompress './dacm/dacm_ru.gz'.
- ...................................................................................................................................................Building BCI's in progress...
- [/cdmapi.c:328 - cdmVload]:new file loaded './dacm/dacm_ru.gz'
- file_server flash flashext hd hdext intranet mail proxy shared soft
- Maximum number of VMU messages : 965
- cordBinit_rem_file (/current/vmu/msg_ent) start --> 1334062943.903305 s ... end --> 1334062946.852671 s after iter 0 (delta= at 3 s)
- MuLaw value read from file /tmp/mulaw: 0
- CM DEBUG 0 - SoftAno [38] : (10/04 16:53:35 20426) ano 3, line 470, file "cmsoftlic.", 0x00000002 0x00000003 0x00000000 0x00000000
- CM DEBUG 0 - SoftAno [38] : (10/04 16:53:35 20427) ano 3, line 2779, file "cmsoftlic.", 0x00000001 0x00000000 0x00000021 0x00000000
- CM DEBUG 0 - SoftAno [38] : (10/04 17:02:30 22754) ano 4, line 1665, file "offorma.c", 0xffffffff 0x00000000 0x00000000 0x00000000
- CM DEBUG 0 - SoftAno [38] : (10/04 17:02:30 24511) ano 1, line 411, file "cnlink.c", 0x0000000e 0x00000002 0x00000000 0x00000000
- CM DEBUG 0 - SoftAno [38] : (10/04 17:02:30 24512) ano 1, line 411, file "cnlink.c", 0x0000000e 0x00000003 0x00000000 0x00000000
- cordBinit_rem_file (/current/vmu/mb_owner) start --> 1334062954.431645 s ... end --> 1334062956.616191 s after iter 0 (delta= at 2 s)
- cordBinit_rem_file (/current/vmu/mb_pwd) start --> 1334062958.194682 s ... end --> 1334062959.822780 s after iter 0 (delta= at 1 s)
- cordBinit_rem_file (/current/vmu/obsol_mb) start --> 1334062961.876458 s ... end --> 1334062963.610082 s after iter 0 (delta= at 2 s)
- sh: /current/snmp_mnt/scripts/updateSNMP.sh: No such file or directory
- ALIZE] VCreateBootpTab(): 7 entrie(s) found in /etc/bootptab
- ALIZE] tftp full path is: /tftpboot/alizecom
- ALIZE] Default Gateway is: 192.168.16.94
- ALIZE] Subnet mask is: 255.255.255.224
- ALIZE] Broadcast is: 192.168.16.95
- ALIZE] ALZ_IA IP addr: 192.168.92.247 Eth addr: 00:00:00:00:00:00
- ALIZE] alize IP addr: 192.168.16.65 Eth addr: 00:80:9F:36:8B:42
- ALIZE] ALZ_APPLI IP addr: 192.168.16.68 Eth addr: 00:00:00:00:00:00
- ALIZE] ALZ_APPLI IP addr: 192.168.16.69 Eth addr: 00:00:00:00:00:00
- ALIZE] ALZ_APPLI IP addr: 192.168.16.70 Eth addr: 00:00:00:00:00:00
- ALIZE] ALZ_APPLI IP addr: 192.168.16.71 Eth addr: 00:00:00:00:00:00
- ALIZE] ALZ_APPLI IP addr: 192.168.16.72 Eth addr: 00:00:00:00:00:00
- Last registred system RESET in line 2254 of file albator.c
- kind : 3
- cause: Power off.
- See: /mnt/soft/debug/reset.log
- ------------------------------------------------------------
- CM DEBUG 0 - Historic [17] : (10/04 17:02:30 45369) evt 0, slot 80, eqpt 255, hboard 1, 0x03 0xff 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:02:30 47534) evt 34, slot 80, eqpt 255, hboard 1, 0x00 0x06 0x00 0x00
- CM DEBUG 0 - Historic [17] : (10/04 17:02:30 47535) evt 34, slot 80, eqpt 255, hboard 1, 0x01 0x02 0x11 0x65
- loading LANGUAGE '1'.
- Parsing country data in progress...
- Running process 2870
- Starting running gzip to decompress './lang/lang_ru.gz'.
- ...............................................Building BCI's in progress...
- [/cdmapi.c:328 - cdmVload]:new file loaded './lang/lang_ru.gz'
- loading LANGUAGE '2'.
- Parsing country data in progress...
- Running process 2871
- Starting running gzip to decompress './lang/lang_gb.gz'.
- ..........................................Building BCI's in progress...
- [/cdmapi.c:328 - cdmVload]:new file loaded './lang/lang_gb.gz'
- loading RT-SIG country dependant data.
- Parsing country data in progress...
- Running process 2872
- Starting running gzip to decompress './dasig/dasig_ru.gz'.
- ..................................................................Building BCI's in progress...
- [/cdmapi.c:328 - cdmVload]:new file loaded './dasig/dasig_ru.gz'
- Starting Applicative CPU Server thread ...
- Entree dans thr_nmcVentry
- Apres cnlinkVstart_timer
- cocdmVmsg() - get SO_CO_CDM_END message
- DSP download request received, DSP Id = 0
- fw_sw.c/download master dsp for debug: MuLaw value 0 used for DSP 0
- Firewall: adding telephony rules
- /usr/bin/downs: info(6): downsInit] Starting ALIZE download server for applicative CPUs
- bootpd: info(6): version 2.4.0
- bootpd: info(6): ALIZE] alz_readtab(): 7 entrie(s) found in /etc/bootptab
- /usr/bin/downs: info(6): downsInit] 7 entrie(s) found in /etc/bootptab
- bootpd: info(6): ALIZE] tftp full path is: /tftpboot/alizecom
- bootpd: info(6): ALIZE] Default Gateway is: 192.168.16.94
- bootpd: info(6): ALIZE] Subnet mask is: 255.255.255.224
- bootpd: info(6): ALIZE] Broadcast is: 192.168.16.95
- bootpd: info(6): ALIZE] CpuType: 1 HostName: ALZ_IA IP addr: 192.168.92.247 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE] CpuType: 2 HostName: alize IP addr: 192.168.16.65 Eth addr: 00:80:9F:36:8B:42
- bootpd: info(6): ALIZE] CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.68 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE] CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.69 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE] CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.70 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE] CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.71 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE] CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.72 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE CpuType: 1 HostName: ALZ_IA IP addr: 192.168.92.247 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE CpuType: 2 HostName: alize IP addr: 192.168.16.65 Eth addr: 00:80:9F:36:8B:42
- bootpd: info(6): Open Firewall for voip board, Mac=00:80:9F:36:8B:42 IP=192.168.16.65, Name=alize
- bootpd: info(6): Running system script /etc/bootpScript with parameters:
- bootpd: info(6): Eventype : request
- bootpd: info(6): Boardtype : voip
- bootpd: info(6): MAC address : 00:80:9F:36:8B:42
- bootpd: info(6): IP address : 192.168.16.65
- bootpd: info(6): BoardName : alize
- bootpd: info(6): Running command /etc/bootpScript request voip 00:80:9F:36:8B:42 192.168.16.65 alize
- BreadBiosIdentification -> PIII DSP download request received, DSP Id = 3
- not detected
- BreadBiosIdentification -> no mega rack detected
- BreadBiosIdentification -> Mega_PS not detected
- CM DEBUG 0 - Historic [17] : (10/04 17:03:36 88589) evt 123, slot 80, eqpt 255, hboard 1, 0x01 0xff 0xff 0xff
- BreadBiosIdentification -> PIII not detected
- BreadBiosIdentification -> no mega rack detected
- BreadBiosIdentification -> Mega_PS not detected
- Adding redirection from 6901/tcp to 192.168.16.65:6900/tcp
- Running redir process... Updating firewall...
- Board detected : [9,0] CPU (00000000)
- position : DSP 0 - ASL [sys 0 cab 0 pos 3]
- CM DEBUG 0 - SoftAno [38] : (10/04 17:03:45 98040) ano 2, line 7170, file "cmconfi.c", 0x00000010 0x00000000 0x00000000 0x00000000
- Ok
- Adding redirection from 6911/tcp to 192.168.16.65:6910/tcp
- Running redir process...
- Board detected : [0,0] A_AMIX_1_LH (0000ffff)
- position : DSP 0 - ASL [sys 0 cab 0 pos 0]
- CM DEBUG 0 - Historic [17] : (10/04 17:03:47 100058) evt 100, slot 1, eqpt 255, hboard 1, 0xbf 0x00 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:47 100496) evt 110, slot 1, eqpt 6, hboard 255, 0x1b 0xff 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:48 100675) evt 110, slot 1, eqpt 5, hboard 255, 0x1d 0xff 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:48 100734) evt 110, slot 1, eqpt 8, hboard 255, 0x1b 0xff 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:48 100768) evt 110, slot 1, eqpt 7, hboard 255, 0x1b 0xff 0xff 0xff
- Updating firewall...
- Board detected : [1,0] A_AMIX_1_LH (0000ffff)
- position : DSP 0 - ASL [sys 0 cab 0 pos 2]
- CM DEBUG 0 - Historic [17] : (10/04 17:03:49 102059) evt 100, slot 2, eqpt 255, hboard 1, 0xbf 0x00 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:50 102689) evt 110, slot 2, eqpt 5, hboard 255, 0x1d 0xff 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:50 102728) evt 110, slot 2, eqpt 6, hboard 255, 0x1d 0xff 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:50 102776) evt 110, slot 2, eqpt 8, hboard 255, 0x1b 0xff 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:03:50 102876) evt 110, slot 2, eqpt 7, hboard 255, 0x1d 0xff 0xff 0xff
- Ok
- Board detected : [2,0] A_EBZ_1_ST (0000ffff)
- position : DSP 0 - ASL [sys 1 cab 1 pos 6]
- CM DEBUG 0 - Historic [17] : (10/04 17:03:51 104053) evt 100, slot 3, eqpt 255, hboard 1, 0xba 0x00 0xff 0xff
- Adding redirection from 7781/udp to 192.168.16.65:7776/udp
- Running redir process...
- Board detected : [3,0] A_EBZ_1_ST (0000ffff)
- position : DSP 0 - ASL [sys 0 cab 0 pos 6]
- CM DEBUG 0 - Historic [17] : (10/04 17:03:53 106053) evt 100, slot 4, eqpt 255, hboard 1, 0xba 0x00 0xff 0xff
- Using /lib/modules/2.4.17-rt3.1/kernel/drivers/net/slhc.o
- Using /current/linpac_mnt/lib/modules/2.4.17-rt3.1/kernel/drivers/isdn/isdn.o
- Updating firewall...
- Board detected : [4,0] A_EBZ_1_ST (0000ffff)
- position : DSP 0 - ASL [sys 0 cab 0 pos 4]
- CM DEBUG 0 - Historic [17] : (10/04 17:03:55 108053) evt 100, slot 5, eqpt 255, hboard 1, 0xba 0x00 0xff 0xff
- Using /current/linpac_mnt/lib/modules/2.4.17-rt3.1/kernel/drivers/isdn/hisax/hisax.o
- Using /current/linpac_mnt/lib/modules/2.4.17-rt3.1/kernel/drivers/isdn/hisax/somo_driver.o
- Board detected : [5,0] APA (0000000f)
- position : DSP 0 - ASL [sys 1 cab 1 pos 0]
- CM DEBUG 0 - Historic [17] : (10/04 17:03:57 110050) evt 100, slot 6, eqpt 255, hboard 1, 0xb4 0x00 0x00 0x0f
- Ok
- Board detected : [5,1] APA (0000000f)
- position : DSP 0 - ASL [sys 1 cab 1 pos 1]
- CM DEBUG 0 - Historic [17] : (10/04 17:03:59 112050) evt 100, slot 6, eqpt 255, hboard 2, 0xb4 0x00 0x00 0x0f
- Adding redirection from 30123/tcp to 192.168.16.65:23/tcp
- Running redir process...
- Board detected : [6,0] E1 (00000001)
- position : DSP 0 - ASL [sys 1 cab 1 pos 2]
- csta[-1] main.c 1175 80 sessions
- csta[-1] main.c 1310 Starting CstaServer...
- Updating firewall... CM DEBUG 0 - Historic [17] : (10/04 17:04:02 115750) evt 100, slot 7, eqpt 255, hboard 1, 0xa1 0x00 0x00 0x01
- Board refused : [7,0] APA (0000000f)
- position : DSP 0 - ASL [sys 1 cab 1 pos 4]
- CM DEBUG 0 - Historic [17] : (10/04 17:04:03 116048) evt 106, slot 8, eqpt 255, hboard 1, 0xb4 0x05 0xff 0xff
- [ACD_INI] Apr 10 2012 17:04:04: No license
- Board refused : [7,1] APA (0000000f)
- position : DSP 0 - ASL [sys 1 cab 1 pos 5]
- CM DEBUG 0 - Historic [17] : (10/04 17:04:05 118064) evt 106, slot 8, eqpt 255, hboard 2, 0xb4 0x05 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:04:05 118066) evt 120, slot 80, eqpt 255, hboard 1, 0x06 0x01 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:04:05 118098) evt 124, slot 80, eqpt 255, hboard 1, 0x00 0x01 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:04:05 118120) evt 124, slot 80, eqpt 255, hboard 1, 0x01 0x01 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:04:05 118122) evt 124, slot 80, eqpt 255, hboard 1, 0x00 0x01 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:04:05 118123) evt 124, slot 80, eqpt 255, hboard 1, 0x01 0x01 0xff 0xff
- CM DEBUG 0 - Historic [17] : (10/04 17:04:05 118146) evt 56, slot 7, eqpt 1, hboard 255, 0x01 0x04 0xff 0xff
- AC DEBUG 0 - SoftAno [38] : (10/04 17:03:30 125292) ano 3, line 9253, file "smconfi.c", 0x00000006 0x00000000 0x00000000 0x00000000
- Ok
- bootpd: info(6): ALIZE CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.68 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.69 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.70 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.71 Eth addr: 00:00:00:00:00:00
- bootpd: info(6): ALIZE CpuType: 6 HostName: ALZ_APPLI IP addr: 192.168.16.72 Eth addr: 00:00:00:00:00:00
- **************************************************
- ** VOIP INIT (1.1) **
- **************************************************
- Voip running on main CPU
- Install voip configuration files [300C[30D [ [32mOK[0m ]
- Initialize audiocode [300C[30D [ [32mOK[0m ]
- Install library links [300C[30D [ [32mOK[0m ]
- Install HTTP server[300C[30D [ [32mOK[0m ]
- Install VoIP Debug[300C[30D [ [32mOK[0m ]
- Board detected : [30,0] XRA (00000007)
- position : DSP 0 - ASL [sys 7 cab 2 pos 9]
- CM DEBUG 0 - Historic [17] : (10/04 17:04:13 126600) evt 100, slot 90, eqpt 255, hboard 1, 0xa7 0x00 0x00 0x07
- Insert RT modules
- Board detected : [31,0] IVPS (000000ff)
- position : DSP 0 - ASL [sys 7 cab 2 pos 9]
- CM DEBUG 0 - Historic [17] : (10/04 17:04:15 128601) evt 100, slot 91, eqpt 255, hboard 1, 0x82 0x00 0x00 0xff
- [300C[30D [ [32mOK[0m ]
- Install TSCIP binaries [300C[30D [ [32mOK[0m ]
- Install NOE IP binary[300C[30D [ [32mOK[0m ]
- Create debug directory in flash[300C[30D [ [32mOK[0m ]
- Inet services on MAIN/VOIP mono CPU[300C[30D [ [32mOK[0m ]
- keep file /etc/securetty
- **************************************************
- ** VOIP INITIALISATION SUCCESS **
- **************************************************
- VOIP HTTPD served started (doc root=/current/html)
- Board detected : [32,0] VOIP (00000000)
- position : DSP 0 - ASL [sys 7 cab 2 pos 9]
- /usr/bin/mini_httpd: started as root without requesting chroot(), warning only
- times=0
- ------
- IMCTIMER version 1.4 (Ctrl-C to stop)
- Board detected : [33,0] VIRT_MEDIA (0000ffff)
- position : DSP 0 - ASL [sys 7 cab 2 pos 9]
- Open Fifo /dev/rtf11
- Open Fifo /dev/rtf10
- Open PRS socket
- VoIP socket for PRS, addr 192.168.16.65
- CM DEBUG 0 - SoftAno [38] : (10/04 17:04:22 135003) ano 3, line 21632, file "cmconfi.c", 0x00000046 0x00000000 0x00000000 0x00000000
- CM DEBUG 0 - Historic [17] : (10/04 17:04:22 135021) evt 100, slot 98, eqpt 255, hboard 1, 0xa8 0x00 0x00 0x00
- CM DEBUG 0 - Historic [17] : (10/04 17:04:22 135040) evt 100, slot 99, eqpt 255, hboard 1, 0xbb 0x00 0xff 0xff
- Appel de smVblockRtpPort
- start step 2: gw_tscip, gwmain
- start step 3: gk
- times=1
- ------
- start step 4: dhcpd restart
- Shutting down dhcpd
- Starting dhcpd: Internet Software Consortium DHCPD $Name: V2-BETA-1-PATCHLEVEL-6 $
- Copyright 1995, 1996, 1997, 1998 The Internet Software Consortium.
- All rights reserved.
- IPLAN-DHCPD: IMC register success
- No subnet declaration for eth0 (192.168.16.65).
- exiting.
- ------
- Check all IBS started : cnt_ibs_wt = 0
- ------
- times=2
- ------
- look at restore
- no restore, call handling is available
- times=2
- ------
- looks at APU boards :
- Half board voip on main cpu operational
- number of APU boards : ia=0 voip=0 ras=0 voip_on_main=1
- APU boards not initialized : 0
- APU boards in perm reset : 0
- ia service present? : 0
- all APU boards are operational
- nb ia = 0 board status 2
- acd service present? : 0
- CM DEBUG 0 - Historic [17] : (10/04 17:04:29 142425) evt 11, slot 80, eqpt 255, hboard 1, 0xff 0xff 0xff 0xff
- end of reset
- .
- -
- [--------> start of /etc/migrate_flash_to_hd.sh script <---------]
- ------------------------------------------------------------------
- do_setup_path /bin:/sbin:/usr/bin:/usr/sbin
- -------------------------------------------
- do_may_migrate_flash_to_hd
- --------------------------
- do_migrate_flash_to_hd
- ----------------------
- do_try_to_reboot_on_hd
- ----------------------
- [--------> end of /etc/migrate_flash_to_hd.sh script <---------]
- ----------------------------------------------------------------
- migrate_flash_to_hd checked
- failsafe checked
- mkdir: /mnt/flash/actis: File exists
- ***************************************************
- * Albator has started all binaries successfully ! *
- ***************************************************
- new PRS connection for board id 71 (fd=35), isb 6 idx 0
- CM DEBUG 0 - SoftAno [38] : (10/04 17:04:55 167807) ano 3, line 386, file "cminiti.c", 0x00000127 0x00000004 0x00000000 0x00000000
- usage: [port(if != 3595)] -fg
- /proc/noflush: No such file or directory
- /proc/noflush: No such file or directory
- /proc/noflush: No such file or directory
- /proc/noflush: No such file or directory
- /proc/noflush: No such file or directory
- /proc/noflush: No such file or directory
- /proc/noflush: No such file or directory
- /proc/noflush: No such file or directory
- alize login:
Add Comment
Please, Sign In to add comment