Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.04.18 11:49:18 =~=~=~=~=~=~=~=~=~=~=~=
- Ubuntu 12.10 arm ttyO2
- arm login: ubuntu
- Password:
- Last login: Wed Apr 17 14:33:02 UTC 2013 on ttyO2
- Welcome to Ubuntu 12.10 (GNU/Linux 3.7.10-x10 armv7l)
- * Documentation: https://help.ubuntu.com/
- ubuntu@arm:~$ echp o 'NTSC_M . ' < > /sys/ca lass/display_control/ompa ap_disp_control_tv_st
- d
- -bash: /sys/class/display_control/omap_disp_control_tv_std: No such file or directory
- ubuntu@arm:~$ cd /sys
- ubuntu@arm:/sys$ ls
- [0m[01;34mblock[0m [01;34mbus[0m [01;34mclass[0m [01;34mdev[0m [01;34mdevices[0m [01;34mfirmware[0m [01;34mfs[0m [01;34mkernel[0m [01;34mmodule[0m [01;34mpower[0m
- ubuntu@arm:/sys$ cs d class
- ubuntu@arm:/sys/class$ ls
- [0m[01;34mata_device[0m [01;34mdma[0m [01;34mi2c-dev[0m [01;34mmmc_host[0m [01;34mscsi_disk[0m [01;34mtty[0m
- [01;34mata_link[0m [01;34mdvb[0m [01;34minput[0m [01;34mmtd[0m [01;34mscsi_generic[0m [01;34mudc[0m
- [01;34mata_port[0m [01;34mfirmware[0m [01;34mlcd[0m [01;34mnet[0m [01;34mscsi_host[0m [01;34muio[0m
- [01;34mbacklight[0m [01;34mgpio[0m [01;34mleds[0m [01;34mpower_supply[0m [01;34msound[0m [01;34musbmon[0m
- [01;34mbdi[0m [01;34mgraphics[0m [01;34mlirc[0m [01;34mrc[0m [01;34mspi_master[0m [01;34mvc[0m
- [01;34mblock[0m [01;34mhidraw[0m [01;34mmdio_bus[0m [01;34mregulator[0m [01;34mspidev[0m [01;34mvideo4linux[0m
- [01;34mbsg[0m [01;34mhwmon[0m [01;34mmem[0m [01;34mrtc[0m [01;34mthermal[0m [01;34mvtconsole[0m
- [01;34mdevfreq[0m [01;34mi2c-adapter[0m [01;34mmisc[0m [01;34mscsi_device[0m [01;34mtimed_output[0m [01;34mwatchdog[0m
- ubuntu@arm:/sys/class$ cd dis cd lcd
- ubuntu@arm:/sys/class/lcd$ ls
- ubuntu@arm:/sys/class/lcd$ lscd lcd[4Pls[6@cd classls[K[5@cd /sysecho 'NTSC_M' > /sys/class/display_control/omap_disp_c
- control_tv_std[As/class/lcd$ sudo halt[K
- [K[Aubuntu@arm:/sys/class/lcd$ sudo halt[2@reboot[19@nano /boot/uboot/uEnv.txt
- [sudo] password for ubuntu:
- [1;24r[0;10m[4l[?7h[?25h[?0c[39;49m[39;49m[0;10m[H[J[0;10;7m GNU nano 2.2.6 File: /boot/uboot/uEnv.txt [3;1H[0;10mkernel_file=zImage
- [4dinitrd_file=initrd.img
- [6d#Video: Uncomment to override U-Boots value:
- [7ddefaultdisplay=tv
- [8d#dvimode=pal
- [9d#vram=12MB
- [11d#Camera:
- [12d#http://shop.leopardimaging.com/product.sc?productId=17
- [13d#camera=li5m03
- [15d#SPI: enable for userspace spi access on expansion header
- [16d#buddy=spidev
- [18d#LSR COM6L Adapter Board
- [19d#http://eewiki.net/display/linuxonarm/LSR+COM6L+Adapter+Board
- [20d#First production run has unprogramed eeprom:
- [21d#buddy=lsr-com6l-adpt[22;32H[0;10;7m[ Read 43 lines ]
- [23d^G[0;10m Get Help [0;10;7m^O[0;10m WriteOut [0;10;7m^R[0;10m Read File [0;10;7m^Y[0;10m Prev Page [0;10;7m^K[0;10m Cut Text [0;10;7m^C[0;10m Cur Pos
- [24d[0;10;7m^X[0;10m Exit[14G[0;10;7m^J[0;10m Justify [0;10;7m^W[0;10m Where Is [0;10;7m^V[0;10m Next Page [0;10;7m^U[0;10m UnCut Text[0;10;7m^T[0;10m To Spell
- [3d[4d[5d[6d[7d[8d[1;71H[0;10;7mModified
- [8d[0;10m[1P[9d[1P[A[A[8d[9d[10d[22d[0;10;7mSave modified buffer (ANSWERING "No" WILL DESTROY CHANGES) ? [23;1H Y[0;10m Yes[K
- [24d[0;10;7m N[0;10m No [14G [0;10;7m^C[0;10m Cancel[K[22;62H
- [0;10;7mFile Name to Write: /boot/uboot/uEnv.txt
- [23d^G[0;10m Get Help[23;21H[0;10;7mM-D[0;10m DOS Format[41G[0;10;7mM-A[0;10m Append[23;61H[0;10;7mM-B[0;10m Backup File
- [24d[0;10;7m^C[0;10m Cancel[17G [0;10;7mM-M[0;10m Mac Format[41G[0;10;7mM-P[0;10m Prepend[22;41H
- [23d[39;49m[0;10m[J[1;71H[0;10;7m [22;31H[0;10m[1K [0;10;7m[ Wrote 43 lines ][0;10m[K[24;80H[24;1H
- ubuntu@arm:/sys/class/lcd$ sudo reboot
- ubuntu@arm:/sys/class/lcd$
- Broadcast message from ubuntu@arm
- (/dev/ttyO2) at 14:46 ...
- The system is going down for reboot NOW!
- [ 852.506011] Restarting system.
- U-Boot SPL 2013.01.01-00006-gef50daa (Feb 01 2013 - 11:44:58)
- OMAP SD/MMC: 0
- reading u-boot.img
- reading u-boot.img
- U-Boot 2013.01.01-00006-gef50daa (Feb 01 2013 - 11:44:58)
- OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
- OMAP3 Beagle board + LPDDR/NAND
- I2C: ready
- DRAM: 512 MiB
- NAND: 0 MiB
- MMC: OMAP SD/MMC: 0
- *** Warning - readenv() failed, using default environment
- In: serial
- Out: serial
- Err: serial
- Beagle xM Rev C
- No EEPROM on expansion board
- No EEPROM on expansion board
- Die ID #636600029ff80000016830100f031029
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 1.800
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Peripheral mode controller at 480ab000 using PIO, IRQ 0
- Net: usb_ether
- Hit any key to stop autoboot: 3 2 1 0
- mmc0 is current device
- gpio: pin 173 (gpio 173) value is 0
- gpio: pin 4 (gpio 4) value is 0
- SD/MMC found on device 0
- reading uEnv.txt
- 1429 bytes read in 4 ms (348.6 KiB/s)
- Loaded environment from uEnv.txt
- Importing environment from mmc ...
- reading zImage
- 3419824 bytes read in 212 ms (15.4 MiB/s)
- reading initrd.img
- 3226974 bytes read in 201 ms (15.3 MiB/s)
- Booting from mmc ...
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.7.10-x10 (root@panda-es-1gb-a3) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #1 SMP Thu Mar 28 13:45:57 UTC 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] Beagle expansionboard: none
- [ 0.000000] Beagle expansionboard2: none
- [ 0.000000] Beagle camera: none
- [ 0.000000] Beagle wl12xx clk:
- [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
- [ 0.000000] cma: CMA: reserved 16 MiB at 9d800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0ec1000 s13312 r8192 d15360 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 124928
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 vram=12MB omapfb.mode=tv:pal omapdss.def_disp=tv root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc buddy=none buddy2=none camera=none wl12xx_clk=
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 1048576 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 492MB = 492MB total
- [ 0.000000] Memory: 467672k/467672k available, 56616k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc090affc (9228 kB)
- [ 0.000000] .init : 0xc090b000 - 0xc096b400 ( 385 kB)
- [ 0.000000] .data : 0xc096c000 - 0xc09f3030 ( 541 kB)
- [ 0.000000] .bss : 0xc09f3054 - 0xc0abbbd8 ( 803 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty0] enabled
- [ 0.000915] Calibrating delay loop... 313.50 BogoMIPS (lpj=1222656)
- [ 0.042999] pid_max: default: 32768 minimum: 301
- [ 0.043182] Security Framework initialized
- [ 0.043243] AppArmor: AppArmor initialized
- [ 0.043518] Mount-cache hash table entries: 512
- [ 0.044586] Initializing cgroup subsys cpuacct
- [ 0.044616] Initializing cgroup subsys memory
- [ 0.044677] Initializing cgroup subsys devices
- [ 0.044708] Initializing cgroup subsys freezer
- [ 0.044738] Initializing cgroup subsys blkio
- [ 0.044738] Initializing cgroup subsys perf_event
- [ 0.044860] CPU: Testing write buffer coherency: ok
- [ 0.045166] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.045227] Setting up static identity map for 0x8065db08 - 0x8065db60
- [ 0.046295] Brought up 1 CPUs
- [ 0.046325] SMP: Total of 1 processors activated (313.50 BogoMIPS).
- [ 0.047332] devtmpfs: initialized
- [ 0.109680] pinctrl core: initialized pinctrl subsystem
- [ 0.110290] regulator-dummy: no parameters
- [ 0.111755] NET: Registered protocol family 16
- [ 0.115875] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.116333] omap-gpmc omap-gpmc: GPMC revision 5.0
- [ 0.118743] OMAP GPIO hardware version 2.5
- [ 0.123626] omap_mux_init: Add partition: #1: core, flags: 0
- [ 0.124999] OMAP3 Beagle Rev: xM C
- [ 0.128051] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
- [ 0.134918] Reprogramming SDRC clock to 400000000 Hz
- [ 0.134948] dpll3_m2_clk rate change failed: -22
- [ 0.136322] Found NAND on CS0
- [ 0.136352] Registering NAND on CS0
- [ 0.136810] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.137054] Could not look up dss_hdmi hw_mod
- [ 0.137237] Could not look up dmic hw_mod
- [ 0.137268] Could not look up mcpdm hw_mod
- [ 0.140167] omap-mcbsp.2: alias fck already exists
- [ 0.140441] omap-mcbsp.3: alias fck already exists
- [ 0.141448] OMAP DMA hardware revision 5.0
- [ 0.143280] arm-pmu: alias fck already exists
- [ 0.153869] bio: create slab <bio-0> at 0
- [ 0.169921] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
- [ 0.170867] SCSI subsystem initialized
- [ 0.171569] usbcore: registered new interface driver usbfs
- [ 0.171691] usbcore: registered new interface driver hub
- [ 0.171905] usbcore: registered new device driver usb
- [ 0.172302] musb-omap2430 musb-omap2430: invalid resource
- [ 0.183135] twl 1-0048: PIH (irq 23) chaining IRQs 338..346
- [ 0.183319] twl 1-0048: power (irq 343) chaining IRQs 346..353
- [ 0.184478] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371
- [ 0.186431] VUSB1V5: 1500 mV normal standby
- [ 0.186950] VUSB1V8: 1800 mV normal standby
- [ 0.187408] VUSB3V1: 3100 mV normal standby
- [ 0.189270] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.190032] vdd_mpu_iva: 600 <--> 1450 mV normal
- [ 0.190521] vdd_core: 600 <--> 1450 mV normal
- [ 0.191131] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
- [ 0.191711] VDAC: 1800 mV normal standby
- [ 0.192382] VDVI: 1800 mV normal standby
- [ 0.193115] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
- [ 0.194061] VAUX3: 1800 mV normal standby
- [ 0.195007] VAUX4: 1800 mV normal standby
- [ 0.195343] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
- [ 0.195434] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
- [ 0.195983] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
- [ 0.196075] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
- [ 0.204956] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
- [ 0.205047] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
- [ 0.205230] media: Linux media interface: v0.10
- [ 0.205352] Linux video capture interface: v2.00
- [ 0.205902] omap-iommu omap-iommu.0: isp registered
- [ 0.206237] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.206939] NetLabel: Initializing
- [ 0.206970] NetLabel: domain hash size = 128
- [ 0.207000] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.207061] NetLabel: unlabeled traffic allowed by default
- [ 0.207580] Switching to clocksource 32k_counter
- [ 0.231750] AppArmor: AppArmor Filesystem Enabled
- [ 0.245880] NET: Registered protocol family 2
- [ 0.246978] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.247375] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.247741] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.247833] TCP: reno registered
- [ 0.247863] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.247894] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.248352] NET: Registered protocol family 1
- [ 0.248840] RPC: Registered named UNIX socket transport module.
- [ 0.248870] RPC: Registered udp transport module.
- [ 0.248870] RPC: Registered tcp transport module.
- [ 0.248901] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.249206] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
- [ 0.250122] Trying to unpack rootfs image as initramfs...
- [ 0.596954] Freeing initrd memory: 3148K
- [ 0.597656] CPU PMU: probing PMU on CPU 0
- [ 0.597686] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.598846] omap_dsp_init: 600000 bytes @ 9ee00000
- [ 0.601104] audit: initializing netlink socket (disabled)
- [ 0.601196] type=2000 audit(0.648:1): initialized
- [ 0.858734] VFS: Disk quotas dquot_6.5.2
- [ 0.859222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.863342] NFS: Registering the id_resolver key type
- [ 0.863464] Key type id_resolver registered
- [ 0.863494] Key type id_legacy registered
- [ 0.863555] fuse init (API version 7.20)
- [ 0.866058] Btrfs loaded
- [ 0.866149] msgmni has been set to 951
- [ 0.868347] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.868408] io scheduler noop registered
- [ 0.868438] io scheduler deadline registered
- [ 0.868499] io scheduler cfq registered (default)
- [ 0.869995] OMAP DSS rev 2.0
- [ 0.873657] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.875396] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
- [ 0.876007] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
- [ 0.876647] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
- [ 1.771392] console [ttyO2] enabled
- [ 1.775695] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 96) is a OMAP UART3
- [ 1.794860] brd: module loaded
- [ 1.804046] loop: module loaded
- [ 1.808837] twl4030_madc twl4030_madc: clk disabled, enabling
- [ 1.817932] No NAND device found
- [ 1.821472] No NAND device found
- [ 1.825164] OneNAND driver initializing
- [ 1.831726] usbcore: registered new interface driver cdc_ether
- [ 1.838073] usbcore: registered new interface driver rndis_host
- [ 1.844451] usbcore: registered new interface driver cdc_ncm
- [ 1.851226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.858276] ehci-omap.0 supply hsusb1 not found, using dummy regulator
- [ 1.865325] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 1.871612] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- [ 2.911163] ehci-omap ehci-omap.0: irq 93, io mem 0x48064800
- [ 2.926727] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 2.932891] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.940093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.947753] usb usb1: Product: OMAP-EHCI Host Controller
- [ 2.953430] usb usb1: Manufacturer: Linux 3.7.10-x10 ehci_hcd
- [ 2.959533] usb usb1: SerialNumber: ehci-omap.0
- [ 2.965209] hub 1-0:1.0: USB hub found
- [ 2.969299] hub 1-0:1.0: 3 ports detected
- [ 2.974060] Initializing USB Mass Storage driver...
- [ 2.979278] usbcore: registered new interface driver usb-storage
- [ 2.985656] USB Mass Storage support registered.
- [ 2.990570] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- [ 3.000732] musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 108
- [ 3.009704] gadget: using random self ethernet address
- [ 3.015289] gadget: using random host ethernet address
- [ 3.021484] usb0: MAC ca:61:e8:df:7f:fd
- [ 3.025512] usb0: HOST MAC 9a:0f:a7:d3:95:16
- [ 3.030090] gadget: Ethernet Gadget, version: Memorial Day 2008
- [ 3.036468] gadget: g_ether ready
- [ 3.040069] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
- [ 3.046081] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
- [ 3.054077] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.061279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.068969] usb usb2: Product: MUSB HDRC host driver
- [ 3.074249] usb usb2: Manufacturer: Linux 3.7.10-x10 musb-hcd
- [ 3.080383] usb usb2: SerialNumber: musb-hdrc.0
- [ 3.085998] hub 2-0:1.0: USB hub found
- [ 3.090026] hub 2-0:1.0: 1 port detected
- [ 3.095092] mousedev: PS/2 mouse device common for all mice
- [ 3.102203] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
- [ 3.115081] twl_rtc twl_rtc: Enabling TWL-RTC
- [ 3.127319] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 3.135406] i2c /dev entries driver
- [ 3.139984] lirc_dev: IR Remote Control driver registered, major 246
- [ 3.146942] smssdio: Siano SMS1xxx SDIO driver
- [ 3.151580] smssdio: Copyright Pierre Ossman
- [ 3.156188] Driver for 1-wire Dallas network protocol.
- [ 3.162536] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 3.170166] twl4030_wdt twl4030_wdt: Failed to register misc device
- [ 3.176849] twl4030_wdt: probe of twl4030_wdt failed with error -16
- [ 3.185211] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
- [ 3.194519] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
- [ 3.201812] cpu cpu0: omap_target: unable to scale voltage up.
- [ 3.208007] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
- [ 3.215240] cpu cpu0: omap_target: unable to scale voltage up.
- [ 3.221435] cpuidle: using governor ladder
- [ 3.225830] cpuidle: using governor menu
- [ 3.230010] sdhci: Secure Digital Host Controller Interface driver
- [ 3.236633] sdhci: Copyright(c) Pierre Ossman
- [ 3.242401] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
- [ 3.248870] omap-dma-engine omap-dma-engine: allocating channel for 62
- [ 3.255889] omap-dma-engine omap-dma-engine: allocating channel for 61
- [ 3.325286] usb 1-2: new high-speed USB device number 2 using ehci-omap
- [ 3.489746] usb 1-2: New USB device found, idVendor=0424, idProduct=9514
- [ 3.496948] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.505645] hub 1-2:1.0: USB hub found
- [ 3.509735] hub 1-2:1.0: 5 ports detected
- [ 3.639831] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.646850] usbcore: registered new interface driver usbhid
- [ 3.652893] usbhid: USB HID core driver
- [ 3.658782] ashmem: initialized
- [ 3.743469] omap-twl4030 omap-twl4030: twl4030-hifi <-> omap-mcbsp.2 mapping ok
- [ 3.753479] oprofile: using arm/armv7
- [ 3.758026] TCP: cubic registered
- [ 3.762725] NET: Registered protocol family 10
- [ 3.768737] NET: Registered protocol family 17
- [ 3.773895] Key type dns_resolver registered
- [ 3.778961] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 3.792785] ThumbEE CPU extension supported.
- [ 3.797454] Registering SWP/SWPB emulation handler
- [ 3.802642] SmartReflex Class3 initialized
- [ 3.821166] clock: disabling unused clocks to save power
- [ 3.827819] usb 1-2.1: new high-speed USB device number 3 using ehci-omap
- [ 3.835845] registered taskstats version 1
- [ 3.854705] Console: switching to colour frame buffer device 90x35
- [ 3.887390] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 3.909057] mmc0: new high speed SDHC card at address 1234
- [ 3.920959] mmcblk0: mmc0:1234 SA04G 3.63 GiB
- [ 3.933624] mmcblk0: p1 p2
- [ 3.943237] VAUX3: incomplete constraints, leaving on
- [ 3.954559] VDVI: incomplete constraints, leaving on
- [ 3.967712] twl_rtc twl_rtc: setting system clock to 2013-04-17 14:47:30 UTC (1366210050)
- [ 3.987030] sr_init: No PMIC hook to init smartreflex
- [ 3.998016] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 4.012054] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 4.025939] cpufreq_cpu0: failed to find cpu0 node
- [ 4.036926] ALSA device list:
- [ 4.045471] #0: omap3beagle
- [ 4.054595] Freeing init memory: 384K
- [ 4.089752] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 4.102722] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.216400] usb 1-2.2: new low-speed USB device number 4 using ehci-omap
- [ 4.268676] udevd[77]: starting version 175
- [ 4.376281] usb 1-2.2: New USB device found, idVendor=04d9, idProduct=1603
- [ 4.395080] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.408874] usb 1-2.2: Product: USB Keyboard
- [ 4.419250] usb 1-2.2: Manufacturer:
- [ 4.494537] input: USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1
- [ 4.568084] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-ehci-omap.0-2.2/input0
- [ 4.661468] input: USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.1/input/input2
- [ 4.734863] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-ehci-omap.0-2.2/input1
- [ 4.880279] usb 1-2.3: new low-speed USB device number 5 using ehci-omap
- [ 5.033599] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c016
- [ 5.047729] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.061981] usb 1-2.3: Product: Optical USB Mouse
- [ 5.073577] usb 1-2.3: Manufacturer: Logitech
- [ 5.102996] input: Logitech Optical USB Mouse as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input3
- [ 5.155517] hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-ehci-omap.0-2.3/input0
- [ 5.302093] usb 1-2.5: new high-speed USB device number 6 using ehci-omap
- [ 5.457244] usb 1-2.5: New USB device found, idVendor=0951, idProduct=1625
- [ 5.471923] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.486755] usb 1-2.5: Product: DT 101 II
- [ 5.497955] usb 1-2.5: Manufacturer: Kingston
- [ 5.509429] usb 1-2.5: SerialNumber: 001CC0EC31EDEA60A7E60203
- [ 5.545928] scsi0 : usb-storage 1-2.5:1.0
- [ 6.590301] scsi 0:0:0:0: Direct-Access Kingston DT 101 II PMAP PQ: 0 ANSI: 0 CCS
- [ 6.625305] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.721099] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.466400] init: ureadahead main process (199) terminated with status 5
- [ 7.509796] init: plymouth main process (200) killed by SEGV signal
- [ 8.065124] sd 0:0:0:0: [sda] 7835648 512-byte logical blocks: (4.01 GB/3.73 GiB)
- [ 8.124694] sd 0:0:0:0: [sda] Write Protect is off
- [ 8.164276] sd 0:0:0:0: [sda] No Caching mode page present
- [ 8.176696] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 8.224853] sd 0:0:0:0: [sda] No Caching mode page present
- [ 8.237274] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 8.278656] sda: sda1
- [ 8.313995] sd 0:0:0:0: [sda] No Caching mode page present
- [ 8.326049] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 8.338439] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 8.370788] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
- Ubuntu 12.10 arm ttyO2
- arm login: ubuntu
- Password:
- Last login: Wed Apr 17 14:43:20 UTC 2013 on ttyO2
- Welcome to Ubuntu 12.10 (GNU/Linux 3.7.10-x10 armv7l)
- * Documentation: https://help.ubuntu.com/
- ubuntu@arm:~$ cat /proc/cmdline
- console=ttyO2,115200n8 console=tty0 vram=12MB omapfb.mode=tv:pal omapdss.def_disp=tv root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc buddy=none buddy2=none camera=none wl12xx_clk=
- ubuntu@arm:~$ cat /proc/cmdline
- ubuntu@arm:~$ [6Psudo reboot[19@nano /boot/uboot/uEnv.txt
- [sudo] password for ubuntu:
- [1;24r[0;10m[4l[?7h[?25h[?0c[39;49m[39;49m[0;10m[H[J[0;10;7m GNU nano 2.2.6 File: /boot/uboot/uEnv.txt [3;1H[0;10mkernel_file=zImage
- [4dinitrd_file=initrd.img
- [6d#Video: Uncomment to override U-Boots value:
- [7ddefaultdisplay=tv
- [8ddvimode=pal
- [9dvram=12MB
- [11d#Camera:
- [12d#http://shop.leopardimaging.com/product.sc?productId=17
- [13d#camera=li5m03
- [15d#SPI: enable for userspace spi access on expansion header
- [16d#buddy=spidev
- [18d#LSR COM6L Adapter Board
- [19d#http://eewiki.net/display/linuxonarm/LSR+COM6L+Adapter+Board
- [20d#First production run has unprogramed eeprom:
- [21d#buddy=lsr-com6l-adpt[22;32H[0;10;7m[ Read 43 lines ]
- [23d^G[0;10m Get Help [0;10;7m^O[0;10m WriteOut [0;10;7m^R[0;10m Read File [0;10;7m^Y[0;10m Prev Page [0;10;7m^K[0;10m Cut Text [0;10;7m^C[0;10m Cur Pos
- [24d[0;10;7m^X[0;10m Exit[14G[0;10;7m^J[0;10m Justify [0;10;7m^W[0;10m Where Is [0;10;7m^V[0;10m Next Page [0;10;7m^U[0;10m UnCut Text[0;10;7m^T[0;10m To Spell
- [3d[4d[5d[6d[7d[8d[1;71H[0;10;7mModified
- [8d[0;10m#dvimode=pal
- #[22d[0;10;7mSave modified buffer (ANSWERING "No" WILL DESTROY CHANGES) ? [23;1H Y[0;10m Yes[K
- [24d[0;10;7m N[0;10m No [14G [0;10;7m^C[0;10m Cancel[K[22;62H
- [0;10;7mFile Name to Write: /boot/uboot/uEnv.txt
- [23d^G[0;10m Get Help[23;21H[0;10;7mM-D[0;10m DOS Format[41G[0;10;7mM-A[0;10m Append[23;61H[0;10;7mM-B[0;10m Backup File
- [24d[0;10;7m^C[0;10m Cancel[17G [0;10;7mM-M[0;10m Mac Format[41G[0;10;7mM-P[0;10m Prepend[22;41H
- [23d[39;49m[0;10m[J[1;71H[0;10;7m [22;31H[0;10m[1K [0;10;7m[ Wrote 43 lines ][0;10m[K[24;80H[24;1H
- ubuntu@arm:~$ sudo nano /boot/uboot/uEnv.txt
- ubuntu@arm:~$ [13Pcat /proc/cmdline
- ubuntu@arm:~$ [6Psudo reboot
- ubuntu@arm:~$ Broadcast message from ubuntu@arm
- (/dev/ttyO2) at 14:57 ...
- The system is going down for reboot NOW!
- [ 635.385498] Restarting system.
- U-Boot SPL 2013.01.01-00006-gef50daa (Feb 01 2013 - 11:44:58)
- OMAP SD/MMC: 0
- reading u-boot.img
- reading u-boot.img
- U-Boot 2013.01.01-00006-gef50daa (Feb 01 2013 - 11:44:58)
- OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
- OMAP3 Beagle board + LPDDR/NAND
- I2C: ready
- DRAM: 512 MiB
- NAND: 0 MiB
- MMC: OMAP SD/MMC: 0
- *** Warning - readenv() failed, using default environment
- In: serial
- Out: serial
- Err: serial
- Beagle xM Rev C
- No EEPROM on expansion board
- No EEPROM on expansion board
- Die ID #636600029ff80000016830100f031029
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 1.800
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Peripheral mode controller at 480ab000 using PIO, IRQ 0
- Net: usb_ether
- Hit any key to stop autoboot: 3 2 1 0
- mmc0 is current device
- gpio: pin 173 (gpio 173) value is 0
- gpio: pin 4 (gpio 4) value is 0
- SD/MMC found on device 0
- reading uEnv.txt
- 1430 bytes read in 4 ms (348.6 KiB/s)
- Loaded environment from uEnv.txt
- Importing environment from mmc ...
- reading zImage
- 3419824 bytes read in 212 ms (15.4 MiB/s)
- reading initrd.img
- 3226974 bytes read in 201 ms (15.3 MiB/s)
- Booting from mmc ...
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.7.10-x10 (root@panda-es-1gb-a3) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #1 SMP Thu Mar 28 13:45:57 UTC 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] Beagle expansionboard: none
- [ 0.000000] Beagle expansionboard2: none
- [ 0.000000] Beagle camera: none
- [ 0.000000] Beagle wl12xx clk:
- [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
- [ 0.000000] cma: CMA: reserved 16 MiB at 9d800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0ec1000 s13312 r8192 d15360 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 124928
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 vram=12MB omapfb.mode=tv:1280x720MR-16@60 omapdss.def_disp=tv root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc buddy=none buddy2=none camera=none wl12xx_clk=
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 1048576 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 492MB = 492MB total
- [ 0.000000] Memory: 467672k/467672k available, 56616k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc090affc (9228 kB)
- [ 0.000000] .init : 0xc090b000 - 0xc096b400 ( 385 kB)
- [ 0.000000] .data : 0xc096c000 - 0xc09f3030 ( 541 kB)
- [ 0.000000] .bss : 0xc09f3054 - 0xc0abbbd8 ( 803 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty0] enabled
- [ 0.000915] Calibrating delay loop... 313.50 BogoMIPS (lpj=1222656)
- [ 0.042999] pid_max: default: 32768 minimum: 301
- [ 0.043182] Security Framework initialized
- [ 0.043243] AppArmor: AppArmor initialized
- [ 0.043518] Mount-cache hash table entries: 512
- [ 0.044586] Initializing cgroup subsys cpuacct
- [ 0.044616] Initializing cgroup subsys memory
- [ 0.044677] Initializing cgroup subsys devices
- [ 0.044708] Initializing cgroup subsys freezer
- [ 0.044738] Initializing cgroup subsys blkio
- [ 0.044738] Initializing cgroup subsys perf_event
- [ 0.044891] CPU: Testing write buffer coherency: ok
- [ 0.045166] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.045227] Setting up static identity map for 0x8065db08 - 0x8065db60
- [ 0.046325] Brought up 1 CPUs
- [ 0.046356] SMP: Total of 1 processors activated (313.50 BogoMIPS).
- [ 0.047332] devtmpfs: initialized
- [ 0.109680] pinctrl core: initialized pinctrl subsystem
- [ 0.110260] regulator-dummy: no parameters
- [ 0.111785] NET: Registered protocol family 16
- [ 0.115936] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.116394] omap-gpmc omap-gpmc: GPMC revision 5.0
- [ 0.118804] OMAP GPIO hardware version 2.5
- [ 0.123687] omap_mux_init: Add partition: #1: core, flags: 0
- [ 0.125061] OMAP3 Beagle Rev: xM C
- [ 0.128112] _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx
- [ 0.135009] Reprogramming SDRC clock to 400000000 Hz
- [ 0.135040] dpll3_m2_clk rate change failed: -22
- [ 0.136383] Found NAND on CS0
- [ 0.136413] Registering NAND on CS0
- [ 0.136871] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.137115] Could not look up dss_hdmi hw_mod
- [ 0.137298] Could not look up dmic hw_mod
- [ 0.137329] Could not look up mcpdm hw_mod
- [ 0.140258] omap-mcbsp.2: alias fck already exists
- [ 0.140502] omap-mcbsp.3: alias fck already exists
- [ 0.141540] OMAP DMA hardware revision 5.0
- [ 0.143371] arm-pmu: alias fck already exists
- [ 0.153930] bio: create slab <bio-0> at 0
- [ 0.169952] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
- [ 0.170898] SCSI subsystem initialized
- [ 0.171600] usbcore: registered new interface driver usbfs
- [ 0.171722] usbcore: registered new interface driver hub
- [ 0.171936] usbcore: registered new device driver usb
- [ 0.172332] musb-omap2430 musb-omap2430: invalid resource
- [ 0.183197] twl 1-0048: PIH (irq 23) chaining IRQs 338..346
- [ 0.183380] twl 1-0048: power (irq 343) chaining IRQs 346..353
- [ 0.184509] twl4030_gpio twl4030_gpio: gpio (irq 338) chaining IRQs 354..371
- [ 0.186492] VUSB1V5: 1500 mV normal standby
- [ 0.187011] VUSB1V8: 1800 mV normal standby
- [ 0.187469] VUSB3V1: 3100 mV normal standby
- [ 0.189331] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.190093] vdd_mpu_iva: 600 <--> 1450 mV normal
- [ 0.190582] vdd_core: 600 <--> 1450 mV normal
- [ 0.191192] VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
- [ 0.191772] VDAC: 1800 mV normal standby
- [ 0.192443] VDVI: 1800 mV normal standby
- [ 0.193176] VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
- [ 0.194122] VAUX3: 1800 mV normal standby
- [ 0.195068] VAUX4: 1800 mV normal standby
- [ 0.195434] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
- [ 0.195495] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
- [ 0.196044] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
- [ 0.196136] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
- [ 0.205047] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
- [ 0.205108] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
- [ 0.205322] media: Linux media interface: v0.10
- [ 0.205413] Linux video capture interface: v2.00
- [ 0.205963] omap-iommu omap-iommu.0: isp registered
- [ 0.206298] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.207000] NetLabel: Initializing
- [ 0.207031] NetLabel: domain hash size = 128
- [ 0.207061] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.207122] NetLabel: unlabeled traffic allowed by default
- [ 0.207641] Switching to clocksource 32k_counter
- [ 0.231781] AppArmor: AppArmor Filesystem Enabled
- [ 0.245941] NET: Registered protocol family 2
- [ 0.247070] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.247467] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.247802] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.247894] TCP: reno registered
- [ 0.247924] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.247985] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.248413] NET: Registered protocol family 1
- [ 0.248901] RPC: Registered named UNIX socket transport module.
- [ 0.248931] RPC: Registered udp transport module.
- [ 0.248962] RPC: Registered tcp transport module.
- [ 0.248992] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.249267] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
- [ 0.250183] Trying to unpack rootfs image as initramfs...
- [ 0.596740] Freeing initrd memory: 3148K
- [ 0.597534] CPU PMU: probing PMU on CPU 0
- [ 0.597564] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.598663] omap_dsp_init: 600000 bytes @ 9ee00000
- [ 0.600921] audit: initializing netlink socket (disabled)
- [ 0.601013] type=2000 audit(0.648:1): initialized
- [ 0.858551] VFS: Disk quotas dquot_6.5.2
- [ 0.859039] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.863189] NFS: Registering the id_resolver key type
- [ 0.863311] Key type id_resolver registered
- [ 0.863342] Key type id_legacy registered
- [ 0.863403] fuse init (API version 7.20)
- [ 0.866088] Btrfs loaded
- [ 0.866180] msgmni has been set to 951
- [ 0.868377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.868438] io scheduler noop registered
- [ 0.868469] io scheduler deadline registered
- [ 0.868530] io scheduler cfq registered (default)
- [ 0.870025] OMAP DSS rev 2.0
- [ 0.873779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.875518] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
- [ 0.876129] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
- [ 0.876770] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
- [ 1.772186] console [ttyO2] enabled
- [ 1.776489] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 96) is a OMAP UART3
- [ 1.795593] brd: module loaded
- [ 1.804779] loop: module loaded
- [ 1.809814] twl4030_madc twl4030_madc: clk disabled, enabling
- [ 1.818817] No NAND device found
- [ 1.822357] No NAND device found
- [ 1.826080] OneNAND driver initializing
- [ 1.832733] usbcore: registered new interface driver cdc_ether
- [ 1.839019] usbcore: registered new interface driver rndis_host
- [ 1.845397] usbcore: registered new interface driver cdc_ncm
- [ 1.852172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.859252] ehci-omap.0 supply hsusb1 not found, using dummy regulator
- [ 1.866302] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 1.872619] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- [ 2.919036] ehci-omap ehci-omap.0: irq 93, io mem 0x48064800
- [ 2.934600] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 2.940826] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.948059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.955718] usb usb1: Product: OMAP-EHCI Host Controller
- [ 2.961364] usb usb1: Manufacturer: Linux 3.7.10-x10 ehci_hcd
- [ 2.967498] usb usb1: SerialNumber: ehci-omap.0
- [ 2.973144] hub 1-0:1.0: USB hub found
- [ 2.977233] hub 1-0:1.0: 3 ports detected
- [ 2.981994] Initializing USB Mass Storage driver...
- [ 2.987243] usbcore: registered new interface driver usb-storage
- [ 2.993652] USB Mass Storage support registered.
- [ 2.998565] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- [ 3.008758] musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 108
- [ 3.017730] gadget: using random self ethernet address
- [ 3.023315] gadget: using random host ethernet address
- [ 3.029479] usb0: MAC 02:06:e1:6d:0f:f4
- [ 3.033508] usb0: HOST MAC c2:3c:ad:22:65:8b
- [ 3.038085] gadget: Ethernet Gadget, version: Memorial Day 2008
- [ 3.044494] gadget: g_ether ready
- [ 3.048095] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
- [ 3.054077] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
- [ 3.062072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.069274] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.076965] usb usb2: Product: MUSB HDRC host driver
- [ 3.082244] usb usb2: Manufacturer: Linux 3.7.10-x10 musb-hcd
- [ 3.088378] usb usb2: SerialNumber: musb-hdrc.0
- [ 3.093963] hub 2-0:1.0: USB hub found
- [ 3.098022] hub 2-0:1.0: 1 port detected
- [ 3.103057] mousedev: PS/2 mouse device common for all mice
- [ 3.110198] input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
- [ 3.123077] twl_rtc twl_rtc: Enabling TWL-RTC
- [ 3.135406] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 3.143920] i2c /dev entries driver
- [ 3.148468] lirc_dev: IR Remote Control driver registered, major 246
- [ 3.155426] smssdio: Siano SMS1xxx SDIO driver
- [ 3.160186] smssdio: Copyright Pierre Ossman
- [ 3.164764] Driver for 1-wire Dallas network protocol.
- [ 3.171112] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 3.178771] twl4030_wdt twl4030_wdt: Failed to register misc device
- [ 3.185424] twl4030_wdt: probe of twl4030_wdt failed with error -16
- [ 3.193725] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
- [ 3.203063] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
- [ 3.210357] cpu cpu0: omap_target: unable to scale voltage up.
- [ 3.216583] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
- [ 3.223785] cpu cpu0: omap_target: unable to scale voltage up.
- [ 3.229980] cpuidle: using governor ladder
- [ 3.234405] cpuidle: using governor menu
- [ 3.238616] sdhci: Secure Digital Host Controller Interface driver
- [ 3.245269] sdhci: Copyright(c) Pierre Ossman
- [ 3.251007] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
- [ 3.257476] omap-dma-engine omap-dma-engine: allocating channel for 62
- [ 3.264526] omap-dma-engine omap-dma-engine: allocating channel for 61
- [ 3.333129] usb 1-2: new high-speed USB device number 2 using ehci-omap
- [ 3.497619] usb 1-2: New USB device found, idVendor=0424, idProduct=9514
- [ 3.504821] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.513549] hub 1-2:1.0: USB hub found
- [ 3.517608] hub 1-2:1.0: 5 ports detected
- [ 3.647674] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.654693] usbcore: registered new interface driver usbhid
- [ 3.660736] usbhid: USB HID core driver
- [ 3.666625] ashmem: initialized
- [ 3.760162] omap-twl4030 omap-twl4030: twl4030-hifi <-> omap-mcbsp.2 mapping ok
- [ 3.770172] oprofile: using arm/armv7
- [ 3.774810] TCP: cubic registered
- [ 3.779266] NET: Registered protocol family 10
- [ 3.785308] NET: Registered protocol family 17
- [ 3.790466] Key type dns_resolver registered
- [ 3.795532] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 3.809020] ThumbEE CPU extension supported.
- [ 3.813720] Registering SWP/SWPB emulation handler
- [ 3.818878] SmartReflex Class3 initialized
- [ 3.837341] clock: disabling unused clocks to save power
- [ 3.843994] usb 1-2.1: new high-speed USB device number 3 using ehci-omap
- [ 3.852050] registered taskstats version 1
- [ 3.856781] fbcvt: 1280x720@60: CVT Name - .921M9-R
- [ 3.862060] omapfb omapfb: cannot parse default modes
- [ 3.874847] Console: switching to colour frame buffer device 90x35
- [ 3.901153] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 3.917816] mmc0: new high speed SDHC card at address 1234
- [ 3.927490] mmcblk0: mmc0:1234 SA04G 3.63 GiB
- [ 3.937561] mmcblk0: p1 p2
- [ 3.965026] VAUX3: incomplete constraints, leaving on
- [ 3.973327] VDVI: incomplete constraints, leaving on
- [ 3.984069] twl_rtc twl_rtc: setting system clock to 2013-04-17 14:58:12 UTC (1366210692)
- [ 3.998291] sr_init: No PMIC hook to init smartreflex
- [ 4.006622] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 4.018035] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 4.029235] cpufreq_cpu0: failed to find cpu0 node
- [ 4.037475] ALSA device list:
- [ 4.043426] #0: omap3beagle
- [ 4.050170] Freeing init memory: 384K
- [ 4.078002] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 4.088439] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.192718] usb 1-2.2: new low-speed USB device number 4 using ehci-omap
- [ 4.248077] udevd[77]: starting version 175
- [ 4.344696] usb 1-2.2: New USB device found, idVendor=04d9, idProduct=1603
- [ 4.358032] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.368835] usb 1-2.2: Product: USB Keyboard
- [ 4.376403] usb 1-2.2: Manufacturer:
- [ 4.438629] input: USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1
- [ 4.489929] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-ehci-omap.0-2.2/input0
- [ 4.575531] input: USB Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.1/input/input2
- [ 4.632324] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-ehci-omap.0-2.2/input1
- [ 4.770935] usb 1-2.3: new low-speed USB device number 5 using ehci-omap
- [ 4.908508] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c016
- [ 4.919403] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.930511] usb 1-2.3: Product: Optical USB Mouse
- [ 4.938873] usb 1-2.3: Manufacturer: Logitech
- [ 4.962249] input: Logitech Optical USB Mouse as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input3
- [ 5.003906] hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-ehci-omap.0-2.3/input0
- [ 5.130310] usb 1-2.5: new high-speed USB device number 6 using ehci-omap
- [ 5.277954] usb 1-2.5: New USB device found, idVendor=0951, idProduct=1625
- [ 5.289123] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.300476] usb 1-2.5: Product: DT 101 II
- [ 5.308288] usb 1-2.5: Manufacturer: Kingston
- [ 5.316406] usb 1-2.5: SerialNumber: 001CC0EC31EDEA60A7E60203
- [ 5.342681] scsi0 : usb-storage 1-2.5:1.0
- [ 6.271484] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.386749] scsi 0:0:0:0: Direct-Access Kingston DT 101 II PMAP PQ: 0 ANSI: 0 CCS
- [ 6.429565] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 7.092773] init: ureadahead main process (198) terminated with status 5
- [ 7.130676] init: plymouth main process (199) killed by SEGV signal
- [ 7.853576] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
- [ 7.875701] sd 0:0:0:0: [sda] 7835648 512-byte logical blocks: (4.01 GB/3.73 GiB)
- [ 7.911346] sd 0:0:0:0: [sda] Write Protect is off
- [ 7.939331] sd 0:0:0:0: [sda] No Caching mode page present
- [ 7.948638] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 7.985137] sd 0:0:0:0: [sda] No Caching mode page present
- [ 7.994384] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 8.033050] sda: sda1
- [ 8.048065] sd 0:0:0:0: [sda] No Caching mode page present
- [ 8.057037] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 8.066467] sd 0:0:0:0: [sda] Attached SCSI removable disk
- Ubuntu 12.10 arm ttyO2
- arm login: ubnt untu
- Password:
- Last login: Wed Apr 17 14:48:42 UTC 2013 on ttyO2
- Welcome to Ubuntu 12.10 (GNU/Linux 3.7.10-x10 armv7l)
- * Documentation: https://help.ubuntu.com/
- ubuntu@arm:~$ sudo reboot[19@nano /boot/uboot/uEnv.txt[1@v[1@a[1@r[1@/[1@l[1@o[1@g[1@/[1@X[1@.[1@o[1@r[1@g[1@.[1@0[1@.[1@l[1@o[1@gboot/uboot/uEnv.txt
- [sudo] password for ubuntu:
- [1;24r[0;10m[4l[?7h[?25h[?0c[39;49m[39;49m[0;10m[H[J[0;10;7m GNU nano 2.2.6 File: /var/log/X.org.0.log [22;35H[ New File ]
- [23d^G[0;10m Get Help [0;10;7m^O[0;10m WriteOut [0;10;7m^R[0;10m Read File [0;10;7m^Y[0;10m Prev Page [0;10;7m^K[0;10m Cut Text [0;10;7m^C[0;10m Cur Pos
- [24d[0;10;7m^X[0;10m Exit[14G[0;10;7m^J[0;10m Justify [0;10;7m^W[0;10m Where Is [0;10;7m^V[0;10m Next Page [0;10;7m^U[0;10m UnCut Text[0;10;7m^T[0;10m To Spell
- [3d[22;16H[0;10;7m[ line 1/1 (100%), col 1/1 (100%), char 0/0 (0%) ]
- [3d[0;10m[1;71H[0;10;7mModified
- [3d[0;10mx[K[22d[0;10;7mSave modified buffer (ANSWERING "No" WILL DESTROY CHANGES) ? [23;1H Y[0;10m Yes[K
- [24d[0;10;7m N[0;10m No [14G [0;10;7m^C[0;10m Cancel[K[22;62H
- [23d[J[24;80H[24;1H
- ubuntu@arm:~$ sudo nano /var/log/X.org.0.logo[1P[1P[1P[1P[1P[1P[1P[1P[1P[1@c[1@a[1@t [1@ /var/log/X.org.0.log
- cat: /var/log/X.org.0.log: No such file or directory
- ubuntu@arm:~$ cd at /var/log/X.org.0.log[1P[1P[1P[1@c[1@d /var[1P[1P[1@ /var/log/X.org.0.log
- ubuntu@arm:/var/log$ ls
- [0m[01;34mConsoleKit[0m btmp [37;44mgdm[0m [01;31msyslog.2.gz[0m
- Xorg.0.log dmesg kern.log [01;31msyslog.3.gz[0m
- Xorg.0.log.old dmesg.0 kern.log.1 [01;31msyslog.4.gz[0m
- alternatives.log [01;31mdmesg.1.gz[0m [01;31mkern.log.2.gz[0m [01;31msyslog.5.gz[0m
- [01;34mapache2[0m [01;31mdmesg.2.gz[0m lastlog [01;31msyslog.6.gz[0m
- [01;34mapt[0m [01;31mdmesg.3.gz[0m mail.err [01;31msyslog.7.gz[0m
- auth.log [01;31mdmesg.4.gz[0m mail.log udev
- auth.log.1 dpkg.log [01;34mnews[0m [01;34munattended-upgrades[0m
- [01;31mauth.log.2.gz[0m faillog pm-powersave.log [01;34mupstart[0m
- boot fontconfig.log syslog wtmp
- bootstrap.log [01;34mfsck[0m syslog.1 wvdialconf.log
- ubuntu@arm:/var/log$ cat Xorg.0.log
- [ 23.479]
- X.Org X Server 1.13.0
- Release Date: 2012-09-05
- [ 23.479] X Protocol Version 11, Revision 0
- [ 23.480] Build Operating System: Linux 3.2.0-1420-omap4 armv7l Ubuntu
- [ 23.480] Current Operating System: Linux arm 3.7.10-x10 #1 SMP Thu Mar 28 13:45:57 UTC 2013 armv7l
- [ 23.480] Kernel command line: console=ttyO2,115200n8 console=tty0 vram=12MB omapfb.mode=tv:1280x720MR-16@60 omapdss.def_disp=tv root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc buddy=none buddy2=none camera=none wl12xx_clk=
- [ 23.480] Build Date: 27 November 2012 07:52:40AM
- [ 23.480] xorg-server 2:1.13.0-0ubuntu6.1 (For technical support please see http://www.ubuntu.com/support)
- [ 23.480] Current version of pixman: 0.26.0
- [ 23.481] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 23.481] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 23.482] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 17 14:58:32 2013
- [ 23.497] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 23.514] (==) No Layout section. Using the first Screen section.
- [ 23.514] (==) No screen section available. Using defaults.
- [ 23.514] (**) |-->Screen "Default Screen Section" (0)
- [ 23.514] (**) | |-->Monitor "<default monitor>"
- [ 23.517] (==) No monitor specified for screen "Default Screen Section".
- Using a default monitor configuration.
- [ 23.517] (==) Automatically adding devices
- [ 23.517] (==) Automatically enabling devices
- [ 23.517] (==) Automatically adding GPU devices
- [ 23.536] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
- [ 23.536] Entry deleted from font path.
- [ 23.536] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
- [ 23.536] Entry deleted from font path.
- [ 23.536] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
- [ 23.536] Entry deleted from font path.
- [ 23.536] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
- [ 23.536] Entry deleted from font path.
- [ 23.537] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
- [ 23.537] Entry deleted from font path.
- [ 23.537] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
- [ 23.537] Entry deleted from font path.
- [ 23.537] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
- [ 23.537] Entry deleted from font path.
- [ 23.537] (==) FontPath set to:
- /usr/share/fonts/X11/misc,
- built-ins
- [ 23.537] (==) ModulePath set to "/usr/lib/arm-linux-gnueabihf/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
- [ 23.537] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 23.538] (II) Loader magic: 0xb6f55e68
- [ 23.538] (II) Module ABI versions:
- [ 23.538] X.Org ANSI C Emulation: 0.4
- [ 23.538] X.Org Video Driver: 13.0
- [ 23.538] X.Org XInput driver : 18.0
- [ 23.538] X.Org Server Extension : 7.0
- [ 23.545] Initializing built-in extension Generic Event Extension
- [ 23.545] Initializing built-in extension SHAPE
- [ 23.545] Initializing built-in extension MIT-SHM
- [ 23.545] Initializing built-in extension XInputExtension
- [ 23.545] Initializing built-in extension XTEST
- [ 23.545] Initializing built-in extension BIG-REQUESTS
- [ 23.546] Initializing built-in extension SYNC
- [ 23.546] Initializing built-in extension XKEYBOARD
- [ 23.546] Initializing built-in extension XC-MISC
- [ 23.546] Initializing built-in extension SECURITY
- [ 23.546] Initializing built-in extension XINERAMA
- [ 23.546] Initializing built-in extension XFIXES
- [ 23.546] Initializing built-in extension RENDER
- [ 23.546] Initializing built-in extension RANDR
- [ 23.546] Initializing built-in extension COMPOSITE
- [ 23.546] Initializing built-in extension DAMAGE
- [ 23.547] Initializing built-in extension MIT-SCREEN-SAVER
- [ 23.547] Initializing built-in extension DOUBLE-BUFFER
- [ 23.547] Initializing built-in extension RECORD
- [ 23.547] Initializing built-in extension DPMS
- [ 23.547] Initializing built-in extension X-Resource
- [ 23.547] Initializing built-in extension XVideo
- [ 23.547] Initializing built-in extension XVideo-MotionCompensation
- [ 23.548] Initializing built-in extension XFree86-VidModeExtension
- [ 23.548] Initializing built-in extension XFree86-DGA
- [ 23.548] Initializing built-in extension XFree86-DRI
- [ 23.548] Initializing built-in extension DRI2
- [ 23.548] (II) LoadModule: "glx"
- [ 23.560] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
- [ 23.579] (II) Module glx: vendor="X.Org Foundation"
- [ 23.579] compiled for 1.13.0, module version = 1.0.0
- [ 23.579] ABI class: X.Org Server Extension, version 7.0
- [ 23.579] (==) AIGLX enabled
- [ 23.579] Loading extension GLX
- [ 23.580] (==) Matched omapfb as autoconfigured driver 0
- [ 23.580] (==) Matched modesetting as autoconfigured driver 1
- [ 23.581] (==) Matched fbdev as autoconfigured driver 2
- [ 23.581] (==) Assigned the driver to the xf86ConfigLayout
- [ 23.581] (II) LoadModule: "omapfb"
- [ 23.587] (WW) Warning, couldn't open module omapfb
- [ 23.587] (II) UnloadModule: "omapfb"
- [ 23.587] (II) Unloading omapfb
- [ 23.587] (EE) Failed to load module "omapfb" (module does not exist, 0)
- [ 23.588] (II) LoadModule: "modesetting"
- [ 23.589] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
- [ 23.597] (II) Module modesetting: vendor="X.Org Foundation"
- [ 23.597] compiled for 1.13.0, module version = 0.5.0
- [ 23.597] Module class: X.Org Video Driver
- [ 23.597] ABI class: X.Org Video Driver, version 13.0
- [ 23.598] (II) LoadModule: "fbdev"
- [ 23.599] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
- [ 23.603] (II) Module fbdev: vendor="X.Org Foundation"
- [ 23.603] compiled for 1.12.99.902, module version = 0.4.3
- [ 23.603] Module class: X.Org Video Driver
- [ 23.603] ABI class: X.Org Video Driver, version 13.0
- [ 23.604] (==) Matched omapfb as autoconfigured driver 0
- [ 23.604] (==) Matched modesetting as autoconfigured driver 1
- [ 23.604] (==) Matched fbdev as autoconfigured driver 2
- [ 23.604] (==) Assigned the driver to the xf86ConfigLayout
- [ 23.604] (II) LoadModule: "omapfb"
- [ 23.607] (WW) Warning, couldn't open module omapfb
- [ 23.607] (II) UnloadModule: "omapfb"
- [ 23.607] (II) Unloading omapfb
- [ 23.607] (EE) Failed to load module "omapfb" (module does not exist, 0)
- [ 23.607] (II) LoadModule: "modesetting"
- [ 23.609] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
- [ 23.609] (II) Module modesetting: vendor="X.Org Foundation"
- [ 23.617] compiled for 1.13.0, module version = 0.5.0
- [ 23.617] Module class: X.Org Video Driver
- [ 23.618] ABI class: X.Org Video Driver, version 13.0
- [ 23.618] (II) UnloadModule: "modesetting"
- [ 23.618] (II) Unloading modesetting
- [ 23.618] (II) Failed to load module "modesetting" (already loaded, 0)
- [ 23.618] (II) LoadModule: "fbdev"
- [ 23.619] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
- [ 23.620] (II) Module fbdev: vendor="X.Org Foundation"
- [ 23.620] compiled for 1.12.99.902, module version = 0.4.3
- [ 23.620] Module class: X.Org Video Driver
- [ 23.620] ABI class: X.Org Video Driver, version 13.0
- [ 23.620] (II) UnloadModule: "fbdev"
- [ 23.620] (II) Unloading fbdev
- [ 23.620] (II) Failed to load module "fbdev" (already loaded, 0)
- [ 23.620] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
- [ 23.621] (II) FBDEV: driver for framebuffer: fbdev
- [ 23.621] (++) using VT number 7
- [ 23.633] (WW) Falling back to old probe method for modesetting
- [ 23.634] (EE) open /dev/dri/card0: No such file or directory
- [ 23.634] (EE) open /dev/dri/card0: No such file or directory
- [ 23.634] (WW) Falling back to old probe method for fbdev
- [ 23.634] (II) Loading sub module "fbdevhw"
- [ 23.634] (II) LoadModule: "fbdevhw"
- [ 23.636] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
- [ 23.641] (II) Module fbdevhw: vendor="X.Org Foundation"
- [ 23.641] compiled for 1.13.0, module version = 0.0.2
- [ 23.642] ABI class: X.Org Video Driver, version 13.0
- [ 23.642] (II) FBDEV(0): using default device
- [ 23.642] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
- [ 23.642] (II) FBDEV(0): Creating default Display subsection in Screen section
- "Default Screen Section" for depth/fbbpp 16/16
- [ 23.643] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
- [ 23.643] (==) FBDEV(0): RGB weight 565
- [ 23.643] (==) FBDEV(0): Default visual is TrueColor
- [ 23.643] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 23.643] (II) FBDEV(0): hardware: omapfb (video memory: 808kB)
- [ 23.643] (II) FBDEV(0): checking modes against framebuffer device...
- [ 23.643] (II) FBDEV(0): checking modes against monitor...
- [ 23.644] (--) FBDEV(0): Virtual size is 720x574 (pitch 720)
- [ 23.644] (**) FBDEV(0): Built-in mode "current": 13.5 MHz, 15.6 kHz, 50.0 Hz (I)
- [ 23.644] (II) FBDEV(0): Modeline "current"x0.0 13.50 720 732 796 864 574 579 584 625 interlace +hsync +vsync -csync (15.6 kHz b)
- [ 23.644] (==) FBDEV(0): DPI set to (96, 96)
- [ 23.644] (II) Loading sub module "fb"
- [ 23.644] (II) LoadModule: "fb"
- [ 23.645] (II) Loading /usr/lib/xorg/modules/libfb.so
- [ 23.663] (II) Module fb: vendor="X.Org Foundation"
- [ 23.664] compiled for 1.13.0, module version = 1.0.0
- [ 23.664] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 23.664] (**) FBDEV(0): using shadow framebuffer
- [ 23.664] (II) Loading sub module "shadow"
- [ 23.664] (II) LoadModule: "shadow"
- [ 23.666] (II) Loading /usr/lib/xorg/modules/libshadow.so
- [ 23.670] (II) Module shadow: vendor="X.Org Foundation"
- [ 23.670] compiled for 1.13.0, module version = 1.1.0
- [ 23.671] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 23.671] (II) UnloadModule: "modesetting"
- [ 23.671] (II) Unloading modesetting
- [ 23.702] (==) FBDEV(0): Backing store disabled
- [ 23.704] (==) FBDEV(0): DPMS enabled
- [ 23.704] (==) RandR enabled
- [ 23.841] (II) AIGLX: Screen 0 is not DRI2 capable
- [ 23.842] (II) AIGLX: Screen 0 is not DRI capable
- [ 24.039] (II) AIGLX: Loaded and initialized swrast
- [ 24.040] (II) GLX: Initialized DRISWRAST GL provider for screen 0
- [ 24.234] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
- [ 24.261] (II) config/udev: Adding input device gpio-keys (/dev/input/event4)
- [ 24.262] (II) No input driver specified, ignoring this device.
- [ 24.262] (II) This device may have been added with another device file.
- [ 24.266] (II) config/udev: Adding input device twl4030_pwrbutton (/dev/input/event0)
- [ 24.266] (**) twl4030_pwrbutton: Applying InputClass "evdev keyboard catchall"
- [ 24.266] (II) LoadModule: "evdev"
- [ 24.267] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
- [ 24.290] (II) Module evdev: vendor="X.Org Foundation"
- [ 24.290] compiled for 1.13.0, module version = 2.7.3
- [ 24.291] Module class: X.Org XInput Driver
- [ 24.291] ABI class: X.Org XInput driver, version 18.0
- [ 24.291] (II) Using input driver 'evdev' for 'twl4030_pwrbutton'
- [ 24.291] (**) twl4030_pwrbutton: always reports core events
- [ 24.291] (**) evdev: twl4030_pwrbutton: Device: "/dev/input/event0"
- [ 24.292] (--) evdev: twl4030_pwrbutton: Vendor 0 Product 0
- [ 24.292] (--) evdev: twl4030_pwrbutton: Found keys
- [ 24.292] (II) evdev: twl4030_pwrbutton: Configuring as keyboard
- [ 24.292] (**) Option "config_info" "udev:/sys/devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0/event0"
- [ 24.292] (II) XINPUT: Adding extended input device "twl4030_pwrbutton" (type: KEYBOARD, id 6)
- [ 24.292] (**) Option "xkb_rules" "evdev"
- [ 24.292] (**) Option "xkb_model" "pc105"
- [ 24.293] (**) Option "xkb_layout" "us"
- [ 24.317] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
- [ 24.317] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
- [ 24.317] (II) Using input driver 'evdev' for ' USB Keyboard'
- [ 24.318] (**) USB Keyboard: always reports core events
- [ 24.318] (**) evdev: USB Keyboard: Device: "/dev/input/event1"
- [ 24.318] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1603
- [ 24.318] (--) evdev: USB Keyboard: Found keys
- [ 24.318] (II) evdev: USB Keyboard: Configuring as keyboard
- [ 24.318] (**) Option "config_info" "udev:/sys/devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input1/event1"
- [ 24.319] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 7)
- [ 24.319] (**) Option "xkb_rules" "evdev"
- [ 24.319] (**) Option "xkb_model" "pc105"
- [ 24.319] (**) Option "xkb_layout" "us"
- [ 24.341] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
- [ 24.344] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
- [ 24.345] (II) Using input driver 'evdev' for ' USB Keyboard'
- [ 24.345] (**) USB Keyboard: always reports core events
- [ 24.345] (**) evdev: USB Keyboard: Device: "/dev/input/event2"
- [ 24.352] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1603
- [ 24.352] (--) evdev: USB Keyboard: Found keys
- [ 24.352] (II) evdev: USB Keyboard: Configuring as keyboard
- [ 24.353] (**) Option "config_info" "udev:/sys/devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.2/1-2.2:1.1/input/input2/event2"
- [ 24.353] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 8)
- [ 24.353] (**) Option "xkb_rules" "evdev"
- [ 24.353] (**) Option "xkb_model" "pc105"
- [ 24.353] (**) Option "xkb_layout" "us"
- [ 24.366] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event3)
- [ 24.367] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
- [ 24.370] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
- [ 24.370] (**) Logitech Optical USB Mouse: always reports core events
- [ 24.370] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event3"
- [ 24.371] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
- [ 24.371] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
- [ 24.371] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
- [ 24.371] (--) evdev: Logitech Optical USB Mouse: Found relative axes
- [ 24.371] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
- [ 24.371] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
- [ 24.371] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
- [ 24.376] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
- [ 24.376] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 24.376] (**) Option "config_info" "udev:/sys/devices/platform/usbhs_omap/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input3/event3"
- [ 24.376] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 9)
- [ 24.379] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
- [ 24.385] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
- [ 24.385] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
- [ 24.386] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
- [ 24.386] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
- [ 24.394] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
- [ 24.394] (II) No input driver specified, ignoring this device.
- [ 24.394] (II) This device may have been added with another device file.
- [ 36.721] (II) XKB: reuse xkmfile /var/lib/xkb/server-8C3648A5FD728529D869F46730BE1BC287DB231C.xkm
- ubuntu@arm:/var/log$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement